← Commit list

5353df91c

Denys Vlasenko

2023-07-10

SUCCESS Duration: 156s

Subject

Update applet size estimates

Binary

No binary (build failed)

Architecture & Compiler Flags

Architecture: x86_64-linux-gnu Compiler: gcc (Ubuntu 11.4.0-1ubuntu1~22.04.3) 11.4.0

—

Build Log

(log yok)

Commit Diff GitHub →

archival/bbunzip.c+4 -4

@@ -415,7 +415,7 @@ int gunzip_main(int argc UNUSED_PARAM, char **argv)
	//usage: "Decompress to stdout"

	//config:config BUNZIP2
-	//config: bool "bunzip2 (8.7 kb)"
+	//config: bool "bunzip2 (9.1 kb)"
	//config: default y
	//config: select FEATURE_BZIP2_DECOMPRESS
	//config: help
@@ -429,7 +429,7 @@ int gunzip_main(int argc UNUSED_PARAM, char **argv)
	//config: should probably say N here.
	//config:
	//config:config BZCAT
-	//config: bool "bzcat (8.7 kb)"
+	//config: bool "bzcat (9 kb)"
	//config: default y
	//config: select FEATURE_BZIP2_DECOMPRESS
	//config: help
@@ -485,7 +485,7 @@ int bunzip2_main(int argc UNUSED_PARAM, char **argv)
	//usage: "Decompress to stdout"

	//config:config UNLZMA
-	//config: bool "unlzma (7.5 kb)"
+	//config: bool "unlzma (7.8 kb)"
	//config: default y
	//config: help
	//config: unlzma is a compression utility using the Lempel-Ziv-Markov chain
@@ -494,7 +494,7 @@ int bunzip2_main(int argc UNUSED_PARAM, char **argv)
	//config: compressors.
	//config:
	//config:config LZCAT
-	//config: bool "lzcat (7.5 kb)"
+	//config: bool "lzcat (7.8 kb)"
	//config: default y
	//config: help
	//config: Alias to "unlzma -c".

archival/dpkg_deb.c+1 -1

@@ -5,7 +5,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config DPKG_DEB
-	//config: bool "dpkg-deb (30 kb)"
+	//config: bool "dpkg-deb (29 kb)"
	//config: default y
	//config: select FEATURE_SEAMLESS_GZ
	//config: help

archival/lzop.c+1 -1

@@ -25,7 +25,7 @@
	"Minimalized" for busybox by Alain Knaff
	*/
	//config:config LZOP
-	//config: bool "lzop (12 kb)"
+	//config: bool "lzop (13 kb)"
	//config: default y
	//config: help
	//config: Lzop compression/decompresion.

console-tools/chvt.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config CHVT
-	//config: bool "chvt (2 kb)"
+	//config: bool "chvt (2.2 kb)"
	//config: default y
	//config: help
	//config: This program is used to change to another terminal.

console-tools/clear.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config CLEAR
-	//config: bool "clear (tiny)"
+	//config: bool "clear (371 bytes)"
	//config: default y
	//config: help
	//config: This program clears the terminal screen.

console-tools/deallocvt.c+1 -1

@@ -8,7 +8,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config DEALLOCVT
-	//config: bool "deallocvt (1.9 kb)"
+	//config: bool "deallocvt (2.2 kb)"
	//config: default y
	//config: help
	//config: This program deallocates unused virtual consoles.

console-tools/dumpkmap.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config DUMPKMAP
-	//config: bool "dumpkmap (1.6 kb)"
+	//config: bool "dumpkmap (1.9 kb)"
	//config: default y
	//config: help
	//config: This program dumps the kernel's keyboard translation table to

console-tools/fgconsole.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config FGCONSOLE
-	//config: bool "fgconsole (1.5 kb)"
+	//config: bool "fgconsole (1.8 kb)"
	//config: default y
	//config: help
	//config: This program prints active (foreground) console number.

console-tools/kbd_mode.c+1 -1

@@ -9,7 +9,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config KBD_MODE
-	//config: bool "kbd_mode (4.1 kb)"
+	//config: bool "kbd_mode (4.3 kb)"
	//config: default y
	//config: help
	//config: This program reports and sets keyboard mode.

console-tools/loadfont.c+1 -1

@@ -10,7 +10,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config LOADFONT
-	//config: bool "loadfont (5.2 kb)"
+	//config: bool "loadfont (5.4 kb)"
	//config: default y
	//config: help
	//config: This program loads a console font from standard input.

console-tools/loadkmap.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config LOADKMAP
-	//config: bool "loadkmap (1.8 kb)"
+	//config: bool "loadkmap (2.1 kb)"
	//config: default y
	//config: help
	//config: This program loads a keyboard translation table from

console-tools/openvt.c+1 -1

@@ -8,7 +8,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config OPENVT
-	//config: bool "openvt (7.2 kb)"
+	//config: bool "openvt (7.4 kb)"
	//config: default y
	//config: help
	//config: This program is used to start a command on an unused

console-tools/reset.c+1 -1

@@ -8,7 +8,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config RESET
-	//config: bool "reset (345 bytes)"
+	//config: bool "reset (676 bytes)"
	//config: default y
	//config: help
	//config: This program is used to reset the terminal screen, if it

console-tools/resize.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config RESIZE
-	//config: bool "resize (903 bytes)"
+	//config: bool "resize (1.2 kb)"
	//config: default y
	//config: help
	//config: This program is used to (re)set the width and height of your current

console-tools/setconsole.c+1 -1

@@ -8,7 +8,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config SETCONSOLE
-	//config: bool "setconsole (3.6 kb)"
+	//config: bool "setconsole (3.8 kb)"
	//config: default y
	//config: help
	//config: Redirect writes to /dev/console to another device,

console-tools/setkeycodes.c+1 -1

@@ -9,7 +9,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config SETKEYCODES
-	//config: bool "setkeycodes (2.1 kb)"
+	//config: bool "setkeycodes (2.4 kb)"
	//config: default y
	//config: help
	//config: This program loads entries into the kernel's scancode-to-keycode

console-tools/setlogcons.c+1 -1

@@ -9,7 +9,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config SETLOGCONS
-	//config: bool "setlogcons (1.8 kb)"
+	//config: bool "setlogcons (2 kb)"
	//config: default y
	//config: help
	//config: This program redirects the output console of kernel messages.

console-tools/showkey.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config SHOWKEY
-	//config: bool "showkey (4.7 kb)"
+	//config: bool "showkey (4.9 kb)"
	//config: default y
	//config: help
	//config: Shows keys pressed.

coreutils/basename.c+1 -1

@@ -14,7 +14,7 @@
	* 3) Save some space by using strcmp(). Calling strncmp() here was silly.
	*/
	//config:config BASENAME
-	//config: bool "basename (438 bytes)"
+	//config: bool "basename (3.7 kb)"
	//config: default y
	//config: help
	//config: basename is used to strip the directory and suffix from filenames,

coreutils/cat.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config CAT
-	//config: bool "cat (5.6 kb)"
+	//config: bool "cat (5.8 kb)"
	//config: default y
	//config: help
	//config: cat is used to concatenate files and print them to the standard

coreutils/chroot.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config CHROOT
-	//config: bool "chroot (3.7 kb)"
+	//config: bool "chroot (4 kb)"
	//config: default y
	//config: help
	//config: chroot is used to change the root directory and run a command.

coreutils/cksum.c+2 -2

@@ -7,11 +7,11 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config CKSUM
-	//config: bool "cksum (4.1 kb)"
+	//config: bool "cksum (4.3 kb)"
	//config: default y
	//config:
	//config:config CRC32
-	//config: bool "crc32 (4.1 kb)"
+	//config: bool "crc32 (4.2 kb)"
	//config: default y

	// APPLET_NOEXEC:name main location suid_type help

coreutils/comm.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config COMM
-	//config: bool "comm (4.2 kb)"
+	//config: bool "comm (4.4 kb)"
	//config: default y
	//config: help
	//config: comm is used to compare two files line by line and return

coreutils/cut.c+1 -1

@@ -9,7 +9,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config CUT
-	//config: bool "cut (5.8 kb)"
+	//config: bool "cut (6.7 kb)"
	//config: default y
	//config: help
	//config: cut is used to print selected parts of lines from

coreutils/date.c+1 -1

@@ -19,7 +19,7 @@
	much as possible, missed out a lot of bounds checking */

	//config:config DATE
-	//config: bool "date (7 kb)"
+	//config: bool "date (7.2 kb)"
	//config: default y
	//config: help
	//config: date is used to set the system date or display the

coreutils/dd.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config DD
-	//config: bool "dd (7.5 kb)"
+	//config: bool "dd (8.3 kb)"
	//config: default y
	//config: help
	//config: dd copies a file (from standard input to standard output,

coreutils/df.c+1 -1

@@ -18,7 +18,7 @@
	* Implement -P and -B; better coreutils compat; cleanup
	*/
	//config:config DF
-	//config: bool "df (6.8 kb)"
+	//config: bool "df (7.1 kb)"
	//config: default y
	//config: help
	//config: df reports the amount of disk space used and available

coreutils/dirname.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config DIRNAME
-	//config: bool "dirname (329 bytes)"
+	//config: bool "dirname (611 bytes)"
	//config: default y
	//config: help
	//config: dirname is used to strip a non-directory suffix from

coreutils/dos2unix.c+2 -2

@@ -12,14 +12,14 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config DOS2UNIX
-	//config: bool "dos2unix (5.2 kb)"
+	//config: bool "dos2unix (5.5 kb)"
	//config: default y
	//config: help
	//config: dos2unix is used to convert a text file from DOS format to
	//config: UNIX format, and vice versa.
	//config:
	//config:config UNIX2DOS
-	//config: bool "unix2dos (5.2 kb)"
+	//config: bool "unix2dos (5.5 kb)"
	//config: default y
	//config: help
	//config: unix2dos is used to convert a text file from UNIX format to

coreutils/du.c+1 -1

@@ -19,7 +19,7 @@
	* 4) Fixed busybox bug #1284 involving long overflow with human_readable.
	*/
	//config:config DU
-	//config: bool "du (6.3 kb)"
+	//config: bool "du (6.5 kb)"
	//config: default y
	//config: help
	//config: du is used to report the amount of disk space used

coreutils/echo.c+1 -1

@@ -19,7 +19,7 @@
	* The previous version did not allow 4-digit octals.
	*/
	//config:config ECHO
-	//config: bool "echo (1.8 kb)"
+	//config: bool "echo (2 kb)"
	//config: default y
	//config: help
	//config: echo prints a specified string to stdout.

coreutils/env.c+1 -1

@@ -24,7 +24,7 @@
	* - use xfunc_error_retval
	*/
	//config:config ENV
-	//config: bool "env (4 kb)"
+	//config: bool "env (4.3 kb)"
	//config: default y
	//config: help
	//config: env is used to set an environment variable and run

coreutils/expand.c+2 -2

@@ -21,13 +21,13 @@
	* Caveat: this versions of expand and unexpand don't accept tab lists.
	*/
	//config:config EXPAND
-	//config: bool "expand (5.1 kb)"
+	//config: bool "expand (5.3 kb)"
	//config: default y
	//config: help
	//config: By default, convert all tabs to spaces.
	//config:
	//config:config UNEXPAND
-	//config: bool "unexpand (5.3 kb)"
+	//config: bool "unexpand (5.5 kb)"
	//config: default y
	//config: help
	//config: By default, convert only leading sequences of blanks to tabs.

coreutils/expr.c+1 -1

@@ -23,7 +23,7 @@
	* provided they all associate ((x op x) op x).
	*/
	//config:config EXPR
-	//config: bool "expr (6.6 kb)"
+	//config: bool "expr (6.8 kb)"
	//config: default y
	//config: help
	//config: expr is used to calculate numbers and print the result

coreutils/factor.c+1 -1

@@ -4,7 +4,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config FACTOR
-	//config: bool "factor (2.7 kb)"
+	//config: bool "factor (3.2 kb)"
	//config: default y
	//config: help
	//config: factor factorizes integers

coreutils/false.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config FALSE
-	//config: bool "false (tiny)"
+	//config: bool "false (314 bytes)"
	//config: default y
	//config: help
	//config: false returns an exit code of FALSE (1).

coreutils/fold.c+1 -1

@@ -11,7 +11,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config FOLD
-	//config: bool "fold (4.6 kb)"
+	//config: bool "fold (4.8 kb)"
	//config: default y
	//config: help
	//config: Wrap text to fit a specific width.

coreutils/head.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config HEAD
-	//config: bool "head (3.8 kb)"
+	//config: bool "head (4 kb)"
	//config: default y
	//config: help
	//config: head is used to print the first specified number of lines

coreutils/hostid.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config HOSTID
-	//config: bool "hostid (286 bytes)"
+	//config: bool "hostid (566 bytes)"
	//config: default y
	//config: help
	//config: hostid prints the numeric identifier (in hexadecimal) for

coreutils/id.c+2 -2

@@ -13,13 +13,13 @@
	* Added -G option Tito Ragusa (C) 2008 for SUSv3.
	*/
	//config:config ID
-	//config: bool "id (7 kb)"
+	//config: bool "id (7.1 kb)"
	//config: default y
	//config: help
	//config: id displays the current user and group ID names.
	//config:
	//config:config GROUPS
-	//config: bool "groups (6.7 kb)"
+	//config: bool "groups (6.8 kb)"
	//config: default y
	//config: help
	//config: Print the group names associated with current user id.

coreutils/link.c+1 -1

@@ -6,7 +6,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config LINK
-	//config: bool "link (3.2 kb)"
+	//config: bool "link (3.5 kb)"
	//config: default y
	//config: help
	//config: link creates hard links between files.

coreutils/ln.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config LN
-	//config: bool "ln (4.9 kb)"
+	//config: bool "ln (5.1 kb)"
	//config: default y
	//config: help
	//config: ln is used to create hard or soft links between files.

coreutils/logname.c+1 -1

@@ -16,7 +16,7 @@
	* a diagnostic message and an error return.
	*/
	//config:config LOGNAME
-	//config: bool "logname (1.1 kb)"
+	//config: bool "logname (1.4 kb)"
	//config: default y
	//config: help
	//config: logname is used to print the current user's login name.

coreutils/md5_sha1_sum.c+5 -5

@@ -6,31 +6,31 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config MD5SUM
-	//config: bool "md5sum (6.5 kb)"
+	//config: bool "md5sum (6.7 kb)"
	//config: default y
	//config: help
	//config: Compute and check MD5 message digest
	//config:
	//config:config SHA1SUM
-	//config: bool "sha1sum (5.9 kb)"
+	//config: bool "sha1sum (6.7 kb)"
	//config: default y
	//config: help
	//config: Compute and check SHA1 message digest
	//config:
	//config:config SHA256SUM
-	//config: bool "sha256sum (7 kb)"
+	//config: bool "sha256sum (8.2 kb)"
	//config: default y
	//config: help
	//config: Compute and check SHA256 message digest
	//config:
	//config:config SHA512SUM
-	//config: bool "sha512sum (7.4 kb)"
+	//config: bool "sha512sum (7.3 kb)"
	//config: default y
	//config: help
	//config: Compute and check SHA512 message digest
	//config:
	//config:config SHA3SUM
-	//config: bool "sha3sum (6.1 kb)"
+	//config: bool "sha3sum (6.3 kb)"
	//config: default y
	//config: help
	//config: Compute and check SHA3 message digest

coreutils/mkdir.c+1 -1

@@ -14,7 +14,7 @@
	/* Nov 28, 2006 Yoshinori Sato <[email protected]>: Add SELinux Support.
	*/
	//config:config MKDIR
-	//config: bool "mkdir (4.5 kb)"
+	//config: bool "mkdir (4.7 kb)"
	//config: default y
	//config: help
	//config: mkdir is used to create directories with the specified names.

coreutils/mkfifo.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config MKFIFO
-	//config: bool "mkfifo (3.8 kb)"
+	//config: bool "mkfifo (4 kb)"
	//config: default y
	//config: help
	//config: mkfifo is used to create FIFOs (named pipes).

coreutils/mknod.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config MKNOD
-	//config: bool "mknod (4.5 kb)"
+	//config: bool "mknod (4.6 kb)"
	//config: default y
	//config: help
	//config: mknod is used to create FIFOs or block/character special

coreutils/mktemp.c+1 -1

@@ -29,7 +29,7 @@
	* -p; else /tmp [deprecated]
	*/
	//config:config MKTEMP
-	//config: bool "mktemp (4.2 kb)"
+	//config: bool "mktemp (4.5 kb)"
	//config: default y
	//config: help
	//config: mktemp is used to create unique temporary files

coreutils/nice.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config NICE
-	//config: bool "nice (2.1 kb)"
+	//config: bool "nice (2.3 kb)"
	//config: default y
	//config: help
	//config: nice runs a program with modified scheduling priority.

coreutils/nl.c+1 -1

@@ -5,7 +5,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config NL
-	//config: bool "nl (4.6 kb)"
+	//config: bool "nl (4.9 kb)"
	//config: default y
	//config: help
	//config: nl is used to number lines of files.

coreutils/nohup.c+1 -1

@@ -11,7 +11,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config NOHUP
-	//config: bool "nohup (2 kb)"
+	//config: bool "nohup (2.2 kb)"
	//config: default y
	//config: help
	//config: run a command immune to hangups, with output to a non-tty.

coreutils/nproc.c+1 -1

@@ -4,7 +4,7 @@
	* Licensed under GPLv2, see LICENSE in this source tree
	*/
	//config:config NPROC
-	//config: bool "nproc (3.7 kb)"
+	//config: bool "nproc (3.9 kb)"
	//config: default y
	//config: help
	//config: Print number of CPUs

coreutils/paste.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config PASTE
-	//config: bool "paste (4.9 kb)"
+	//config: bool "paste (5.1 kb)"
	//config: default y
	//config: help
	//config: paste is used to paste lines of different files together

coreutils/printenv.c+1 -1

@@ -8,7 +8,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config PRINTENV
-	//config: bool "printenv (1.3 kb)"
+	//config: bool "printenv (1.6 kb)"
	//config: default y
	//config: help
	//config: printenv is used to print all or part of environment.

coreutils/printf.c+1 -1

@@ -38,7 +38,7 @@
	/* 19990508 Busy Boxed! Dave Cinege */

	//config:config PRINTF
-	//config: bool "printf (3.8 kb)"
+	//config: bool "printf (4.1 kb)"
	//config: default y
	//config: help
	//config: printf is used to format and print specified strings.

coreutils/pwd.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config PWD
-	//config: bool "pwd (3.7 kb)"
+	//config: bool "pwd (4 kb)"
	//config: default y
	//config: help
	//config: pwd is used to print the current directory.

coreutils/readlink.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config READLINK
-	//config: bool "readlink (4 kb)"
+	//config: bool "readlink (4.8 kb)"
	//config: default y
	//config: help
	//config: This program reads a symbolic link and returns the name

coreutils/realpath.c+1 -1

@@ -8,7 +8,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config REALPATH
-	//config: bool "realpath (1.6 kb)"
+	//config: bool "realpath (2.5 kb)"
	//config: default y
	//config: help
	//config: Return the canonicalized absolute pathname.

coreutils/rm.c+1 -1

@@ -11,7 +11,7 @@
	* Size reduction.
	*/
	//config:config RM
-	//config: bool "rm (5.4 kb)"
+	//config: bool "rm (5.5 kb)"
	//config: default y
	//config: help
	//config: rm is used to remove files or directories.

coreutils/rmdir.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config RMDIR
-	//config: bool "rmdir (3.5 kb)"
+	//config: bool "rmdir (3.8 kb)"
	//config: default y
	//config: help
	//config: rmdir is used to remove empty directories.

coreutils/seq.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config SEQ
-	//config: bool "seq (3.8 kb)"
+	//config: bool "seq (4 kb)"
	//config: default y
	//config: help
	//config: print a sequence of numbers

coreutils/shred.c+1 -1

@@ -5,7 +5,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config SHRED
-	//config: bool "shred (4.9 kb)"
+	//config: bool "shred (5.5 kb)"
	//config: default y
	//config: help
	//config: Overwrite a file to hide its contents, and optionally delete it

coreutils/shuf.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config SHUF
-	//config: bool "shuf (5.4 kb)"
+	//config: bool "shuf (6 kb)"
	//config: default y
	//config: help
	//config: Generate random permutations

coreutils/sleep.c+1 -1

@@ -13,7 +13,7 @@
	* time suffixes for seconds, minutes, hours, and days.
	*/
	//config:config SLEEP
-	//config: bool "sleep (2 kb)"
+	//config: bool "sleep (2.4 kb)"
	//config: default y
	//config: help
	//config: sleep is used to pause for a specified number of seconds.

coreutils/sort.c+1 -1

@@ -12,7 +12,7 @@
	* http://www.opengroup.org/onlinepubs/007904975/utilities/sort.html
	*/
	//config:config SORT
-	//config: bool "sort (7.7 kb)"
+	//config: bool "sort (8.1 kb)"
	//config: default y
	//config: help
	//config: sort is used to sort lines of text in specified files.

coreutils/split.c+1 -1

@@ -6,7 +6,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config SPLIT
-	//config: bool "split (5 kb)"
+	//config: bool "split (5.2 kb)"
	//config: default y
	//config: help
	//config: Split a file into pieces.

coreutils/stty.c+1 -1

@@ -10,7 +10,7 @@
	* Special for busybox ported by Vladimir Oleynik <[email protected]> 2001
	*/
	//config:config STTY
-	//config: bool "stty (8.9 kb)"
+	//config: bool "stty (9.2 kb)"
	//config: default y
	//config: help
	//config: stty is used to change and print terminal line settings.

coreutils/sum.c+1 -1

@@ -13,7 +13,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config SUM
-	//config: bool "sum (4 kb)"
+	//config: bool "sum (4.2 kb)"
	//config: default y
	//config: help
	//config: checksum and count the blocks in a file

coreutils/sync.c+2 -2

@@ -8,7 +8,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config SYNC
-	//config: bool "sync (3.8 kb)"
+	//config: bool "sync (4 kb)"
	//config: default y
	//config: help
	//config: sync is used to flush filesystem buffers.
@@ -113,7 +113,7 @@ int sync_main(int argc UNUSED_PARAM, char **argv IF_NOT_DESKTOP(UNUSED_PARAM))
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config FSYNC
-	//config: bool "fsync (3.6 kb)"
+	//config: bool "fsync (3.8 kb)"
	//config: default y
	//config: help
	//config: fsync is used to flush file-related cached blocks to disk.

coreutils/tac.c+1 -1

@@ -13,7 +13,7 @@
	* http://www.uclibc.org/lists/busybox/2003-July/008813.html
	*/
	//config:config TAC
-	//config: bool "tac (3.9 kb)"
+	//config: bool "tac (4.1 kb)"
	//config: default y
	//config: help
	//config: tac is used to concatenate and print files in reverse.

coreutils/tail.c+1 -1

@@ -19,7 +19,7 @@
	* 7) lseek attempted when count==0 even if arg was +0 (from top)
	*/
	//config:config TAIL
-	//config: bool "tail (6.8 kb)"
+	//config: bool "tail (7.2 kb)"
	//config: default y
	//config: help
	//config: tail is used to print the last specified number of lines

coreutils/tee.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config TEE
-	//config: bool "tee (4.2 kb)"
+	//config: bool "tee (4.4 kb)"
	//config: default y
	//config: help
	//config: tee is used to read from standard input and write

coreutils/test.c+1 -1

@@ -20,7 +20,7 @@
	* "This program is in the Public Domain."
	*/
	//config:config TEST
-	//config: bool "test (4.1 kb)"
+	//config: bool "test (4.4 kb)"
	//config: default y
	//config: help
	//config: test is used to check file types and compare values,

coreutils/timeout.c+1 -1

@@ -28,7 +28,7 @@
	* rewrite 14-11-2008 vda
	*/
	//config:config TIMEOUT
-	//config: bool "timeout (6 kb)"
+	//config: bool "timeout (6.5 kb)"
	//config: default y
	//config: help
	//config: Runs a program and watches it. If it does not terminate in

coreutils/touch.c+1 -1

@@ -13,7 +13,7 @@
	* Also, exiting on a failure was a bug. All args should be processed.
	*/
	//config:config TOUCH
-	//config: bool "touch (5.9 kb)"
+	//config: bool "touch (6.1 kb)"
	//config: default y
	//config: help
	//config: touch is used to create or change the access and/or

coreutils/tr.c+1 -1

@@ -19,7 +19,7 @@
	* TODO: graph, print
	*/
	//config:config TR
-	//config: bool "tr (5.1 kb)"
+	//config: bool "tr (5.3 kb)"
	//config: default y
	//config: help
	//config: tr is used to squeeze, and/or delete characters from standard

coreutils/true.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config TRUE
-	//config: bool "true (tiny)"
+	//config: bool "true (311 bytes)"
	//config: default y
	//config: help
	//config: true returns an exit code of TRUE (0).

coreutils/truncate.c+1 -1

@@ -6,7 +6,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config TRUNCATE
-	//config: bool "truncate (4.2 kb)"
+	//config: bool "truncate (4.4 kb)"
	//config: default y
	//config: help
	//config: truncate truncates files to a given size. If a file does

coreutils/tsort.c+1 -1

@@ -5,7 +5,7 @@
	* public domain -- David Leonard, 2022
	*/
	//config:config TSORT
-	//config: bool "tsort (0.7 kb)"
+	//config: bool "tsort (2.6 kb)"
	//config: default y
	//config: help
	//config: tsort performs a topological sort.

coreutils/tty.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config TTY
-	//config: bool "tty (3.6 kb)"
+	//config: bool "tty (3.9 kb)"
	//config: default y
	//config: help
	//config: tty is used to print the name of the current terminal to

coreutils/uname.c+2 -2

@@ -44,7 +44,7 @@
	* Fix handling of -a to not print "unknown", add -o and -i support.
	*/
	//config:config UNAME
-	//config: bool "uname (3.9 kb)"
+	//config: bool "uname (4.2 kb)"
	//config: default y
	//config: help
	//config: uname is used to print system information.
@@ -59,7 +59,7 @@
	//config:
	//can't use "ARCH" for this applet, all hell breaks loose in build system :)
	//config:config BB_ARCH
-	//config: bool "arch (1.1 kb)"
+	//config: bool "arch (1.4 kb)"
	//config: default y
	//config: help
	//config: Same as uname -m.

coreutils/uniq.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config UNIQ
-	//config: bool "uniq (4.9 kb)"
+	//config: bool "uniq (5.1 kb)"
	//config: default y
	//config: help
	//config: uniq is used to remove duplicate lines from a sorted file.

coreutils/unlink.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2, see LICENSE in this source tree
	*/
	//config:config UNLINK
-	//config: bool "unlink (3.2 kb)"
+	//config: bool "unlink (3.5 kb)"
	//config: default y
	//config: help
	//config: unlink deletes a file by calling unlink()

coreutils/usleep.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config USLEEP
-	//config: bool "usleep (1.3 kb)"
+	//config: bool "usleep (1.6 kb)"
	//config: default y
	//config: help
	//config: usleep is used to pause for a specified number of microseconds.

coreutils/uudecode.c+3 -3

@@ -11,7 +11,7 @@
	* "end" line
	*/
	//config:config UUDECODE
-	//config: bool "uudecode (5.8 kb)"
+	//config: bool "uudecode (5.9 kb)"
	//config: default y
	//config: help
	//config: uudecode is used to decode a uuencoded file.
@@ -178,13 +178,13 @@ int uudecode_main(int argc UNUSED_PARAM, char **argv)
	#endif

	//config:config BASE32
-	//config: bool "base32 (4.9 kb)"
+	//config: bool "base32 (5.5 kb)"
	//config: default y
	//config: help
	//config: Base32 encode and decode

	//config:config BASE64
-	//config: bool "base64 (4.9 kb)"
+	//config: bool "base64 (5.3 kb)"
	//config: default y
	//config: help
	//config: Base64 encode and decode

coreutils/uuencode.c+1 -1

@@ -8,7 +8,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config UUENCODE
-	//config: bool "uuencode (4.4 kb)"
+	//config: bool "uuencode (4.7 kb)"
	//config: default y
	//config: help
	//config: uuencode is used to uuencode a file.

coreutils/wc.c+1 -1

@@ -33,7 +33,7 @@
	* for which 'wc -c' should output '0'.
	*/
	//config:config WC
-	//config: bool "wc (4.5 kb)"
+	//config: bool "wc (4.7 kb)"
	//config: default y
	//config: help
	//config: wc is used to print the number of bytes, words, and lines,

coreutils/who.c+3 -3

@@ -15,7 +15,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config WHO
-	//config: bool "who (3.9 kb)"
+	//config: bool "who (5.6 kb)"
	//config: default y
	//config: depends on FEATURE_UTMP
	//config: help
@@ -23,14 +23,14 @@
	//config:
	// procps-ng has this variation of "who":
	//config:config W
-	//config: bool "w (3.8 kb)"
+	//config: bool "w (5.5 kb)"
	//config: default y
	//config: depends on FEATURE_UTMP
	//config: help
	//config: Print users currently logged on.
	//config:
	//config:config USERS
-	//config: bool "users (3.4 kb)"
+	//config: bool "users (3.6 kb)"
	//config: default y
	//config: depends on FEATURE_UTMP
	//config: help

coreutils/whoami.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config WHOAMI
-	//config: bool "whoami (3.2 kb)"
+	//config: bool "whoami (3.5 kb)"
	//config: default y
	//config: help
	//config: whoami is used to print the username of the current

coreutils/yes.c+1 -1

@@ -11,7 +11,7 @@
	* Size reductions and removed redundant applet name prefix from error messages.
	*/
	//config:config YES
-	//config: bool "yes (1.2 kb)"
+	//config: bool "yes (1.5 kb)"
	//config: default y
	//config: help
	//config: yes is used to repeatedly output a specific string, or

debianutils/pipe_progress.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config PIPE_PROGRESS
-	//config: bool "pipe_progress (275 bytes)"
+	//config: bool "pipe_progress (576 bytes)"
	//config: default y
	//config: help
	//config: Display a dot to indicate pipe activity.

debianutils/run_parts.c+1 -1

@@ -23,7 +23,7 @@
	* broken compatibility because the BusyBox policy doesn't allow them.
	*/
	//config:config RUN_PARTS
-	//config: bool "run-parts (6.1 kb)"
+	//config: bool "run-parts (6.2 kb)"
	//config: default y
	//config: help
	//config: run-parts is a utility designed to run all the scripts in a directory.

debianutils/which.c+1 -1

@@ -6,7 +6,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config WHICH
-	//config: bool "which (3.8 kb)"
+	//config: bool "which (4 kb)"
	//config: default y
	//config: help
	//config: which is used to find programs in your PATH and

e2fsprogs/chattr.c+1 -1

@@ -10,7 +10,7 @@
	* Public License
	*/
	//config:config CHATTR
-	//config: bool "chattr (3.8 kb)"
+	//config: bool "chattr (4.1 kb)"
	//config: default y
	//config: help
	//config: chattr changes the file attributes on a second extended file system.

e2fsprogs/fsck.c+1 -1

@@ -34,7 +34,7 @@
	* It doesn't guess filesystem types from on-disk format.
	*/
	//config:config FSCK
-	//config: bool "fsck (7.4 kb)"
+	//config: bool "fsck (7.6 kb)"
	//config: default y
	//config: help
	//config: fsck is used to check and optionally repair one or more filesystems.

e2fsprogs/lsattr.c+1 -1

@@ -10,7 +10,7 @@
	* Public License
	*/
	//config:config LSATTR
-	//config: bool "lsattr (5.5 kb)"
+	//config: bool "lsattr (5.7 kb)"
	//config: default y
	//config: help
	//config: lsattr lists the file attributes on a second extended file system.

editors/awk.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config AWK
-	//config: bool "awk (23 kb)"
+	//config: bool "awk (24 kb)"
	//config: default y
	//config: help
	//config: Awk is used as a pattern scanning and processing language.

editors/cmp.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config CMP
-	//config: bool "cmp (4.9 kb)"
+	//config: bool "cmp (5.3 kb)"
	//config: default y
	//config: help
	//config: cmp is used to compare two files and returns the result

editors/ed.c+1 -1

@@ -7,7 +7,7 @@
	* The "ed" built-in command (much simplified)
	*/
	//config:config ED
-	//config: bool "ed (21 kb)"
+	//config: bool "ed (16 kb)"
	//config: default y
	//config: help
	//config: The original 1970's Unix text editor, from the days of teletypes.

editors/patch.c+1 -1

@@ -21,7 +21,7 @@
	* [file] which file to patch
	*/
	//config:config PATCH
-	//config: bool "patch (9.4 kb)"
+	//config: bool "patch (9.6 kb)"
	//config: default y
	//config: help
	//config: Apply a unified diff formatted patch.

editors/patch_toybox.c+1 -1

@@ -26,7 +26,7 @@
	USE_PATCH(NEWTOY(patch, USE_TOYBOX_DEBUG("x")"up#i:R", TOYFLAG_USR\|TOYFLAG_BIN))

	config PATCH
-	bool "patch (9.4 kb)"
+	bool "patch (9.6 kb)"
	default y
	help
	usage: patch [-i file] [-p depth] [-Ru]

editors/vi.c+1 -1

@@ -18,7 +18,7 @@
	// An "ex" line oriented mode- maybe using "cmdedit"

	//config:config VI
-	//config: bool "vi (23 kb)"
+	//config: bool "vi (26 kb)"
	//config: default y
	//config: help
	//config: 'vi' is a text editor. More specifically, it is the One True

findutils/find.c+1 -1

@@ -51,7 +51,7 @@
	* diff -u /tmp/std_find /tmp/bb_find && echo Identical
	*/
	//config:config FIND
-	//config: bool "find (14 kb)"
+	//config: bool "find (16 kb)"
	//config: default y
	//config: help
	//config: find is used to search your system to find specified files.

findutils/grep.c+3 -3

@@ -18,19 +18,19 @@
	* (C) 2006 Jac Goudsmit added -o option
	*/
	//config:config GREP
-	//config: bool "grep (8.6 kb)"
+	//config: bool "grep (8.9 kb)"
	//config: default y
	//config: help
	//config: grep is used to search files for a specified pattern.
	//config:
	//config:config EGREP
-	//config: bool "egrep (7.8 kb)"
+	//config: bool "egrep (8 kb)"
	//config: default y
	//config: help
	//config: Alias to "grep -E".
	//config:
	//config:config FGREP
-	//config: bool "fgrep (7.8 kb)"
+	//config: bool "fgrep (8 kb)"
	//config: default y
	//config: help
	//config: Alias to "grep -F".

findutils/xargs.c+1 -1

@@ -15,7 +15,7 @@
	* http://www.opengroup.org/onlinepubs/007904975/utilities/xargs.html
	*/
	//config:config XARGS
-	//config: bool "xargs (7.2 kb)"
+	//config: bool "xargs (7.6 kb)"
	//config: default y
	//config: help
	//config: xargs is used to execute a specified command for

init/halt.c+3 -3

@@ -7,19 +7,19 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config HALT
-	//config: bool "halt (4 kb)"
+	//config: bool "halt (4.3 kb)"
	//config: default y
	//config: help
	//config: Stop all processes and halt the system.
	//config:
	//config:config POWEROFF
-	//config: bool "poweroff (4 kb)"
+	//config: bool "poweroff (4.3 kb)"
	//config: default y
	//config: help
	//config: Stop all processes and power off the system.
	//config:
	//config:config REBOOT
-	//config: bool "reboot (4 kb)"
+	//config: bool "reboot (4.3 kb)"
	//config: default y
	//config: help
	//config: Stop all processes and reboot the system.

klibc-utils/resume.c+1 -1

@@ -4,7 +4,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config RESUME
-	//config: bool "resume (3.2 kb)"
+	//config: bool "resume (3.6 kb)"
	//config: default y
	//config: help
	//config: Resume from saved "suspend-to-disk" image

klibc-utils/run-init.c+1 -1

@@ -6,7 +6,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config RUN_INIT
-	//config: bool "run-init (7.7 kb)"
+	//config: bool "run-init (8 kb)"
	//config: default y
	//config: help
	//config: The run-init utility is used from initramfs to select a new

loginutils/add-remove-shell.c+2 -2

@@ -8,13 +8,13 @@
	* for details.
	*/
	//config:config ADD_SHELL
-	//config: bool "add-shell (3.1 kb)"
+	//config: bool "add-shell (3.3 kb)"
	//config: default y if DESKTOP
	//config: help
	//config: Add shells to /etc/shells.
	//config:
	//config:config REMOVE_SHELL
-	//config: bool "remove-shell (3 kb)"
+	//config: bool "remove-shell (3.3 kb)"
	//config: default y if DESKTOP
	//config: help
	//config: Remove shells from /etc/shells.

loginutils/addgroup.c+1 -1

@@ -9,7 +9,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config ADDGROUP
-	//config: bool "addgroup (8.6 kb)"
+	//config: bool "addgroup (8.8 kb)"
	//config: default y
	//config: select LONG_OPTS
	//config: help

loginutils/chpasswd.c+1 -1

@@ -6,7 +6,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config CHPASSWD
-	//config: bool "chpasswd (18 kb)"
+	//config: bool "chpasswd (19 kb)"
	//config: default y
	//config: help
	//config: Reads a file of user name and password pairs from standard input

loginutils/cryptpw.c+2 -2

@@ -10,14 +10,14 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config CRYPTPW
-	//config: bool "cryptpw (14 kb)"
+	//config: bool "cryptpw (15 kb)"
	//config: default y
	//config: help
	//config: Encrypts the given password with the crypt(3) libc function
	//config: using the given salt.
	//config:
	//config:config MKPASSWD
-	//config: bool "mkpasswd (15 kb)"
+	//config: bool "mkpasswd (16 kb)"
	//config: default y
	//config: help
	//config: Encrypts the given password with the crypt(3) libc function

loginutils/deluser.c+2 -2

@@ -9,13 +9,13 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config DELUSER
-	//config: bool "deluser (9.1 kb)"
+	//config: bool "deluser (9.3 kb)"
	//config: default y
	//config: help
	//config: Utility for deleting a user account.
	//config:
	//config:config DELGROUP
-	//config: bool "delgroup (6.4 kb)"
+	//config: bool "delgroup (6.6 kb)"
	//config: default y
	//config: help
	//config: Utility for deleting a group account.

loginutils/getty.c+1 -1

@@ -22,7 +22,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config GETTY
-	//config: bool "getty (10 kb)"
+	//config: bool "getty (11 kb)"
	//config: default y
	//config: select FEATURE_SYSLOG
	//config: help

loginutils/login.c+1 -1

@@ -3,7 +3,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config LOGIN
-	//config: bool "login (24 kb)"
+	//config: bool "login (25 kb)"
	//config: default y
	//config: select FEATURE_SYSLOG
	//config: help

loginutils/passwd.c+1 -1

@@ -3,7 +3,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config PASSWD
-	//config: bool "passwd (21 kb)"
+	//config: bool "passwd (22 kb)"
	//config: default y
	//config: select FEATURE_SYSLOG
	//config: help

loginutils/sulogin.c+1 -1

@@ -5,7 +5,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config SULOGIN
-	//config: bool "sulogin (17 kb)"
+	//config: bool "sulogin (18 kb)"
	//config: default y
	//config: select FEATURE_SYSLOG
	//config: help

loginutils/vlock.c+1 -1

@@ -16,7 +16,7 @@
	* It now works with md5, sha1, etc passwords.
	*/
	//config:config VLOCK
-	//config: bool "vlock (17 kb)"
+	//config: bool "vlock (18 kb)"
	//config: default y
	//config: help
	//config: Build the "vlock" applet which allows you to lock (virtual) terminals.

mailutils/makemime.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config MAKEMIME
-	//config: bool "makemime (5.4 kb)"
+	//config: bool "makemime (5.6 kb)"
	//config: default y
	//config: help
	//config: Create MIME-formatted messages.

mailutils/popmaildir.c+1 -1

@@ -10,7 +10,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config POPMAILDIR
-	//config: bool "popmaildir (10 kb)"
+	//config: bool "popmaildir (11 kb)"
	//config: default y
	//config: help
	//config: Simple yet powerful POP3 mail popper. Delivers content

mailutils/reformime.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config REFORMIME
-	//config: bool "reformime (7.5 kb)"
+	//config: bool "reformime (7.6 kb)"
	//config: default y
	//config: help
	//config: Parse MIME-formatted messages.

miscutils/adjtimex.c+1 -1

@@ -11,7 +11,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config ADJTIMEX
-	//config: bool "adjtimex (4.7 kb)"
+	//config: bool "adjtimex (4.9 kb)"
	//config: default y
	//config: help
	//config: Adjtimex reads and optionally sets adjustment parameters for

miscutils/ascii.c+1 -1

@@ -5,7 +5,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config ASCII
-	//config: bool "ascii"
+	//config: bool "ascii (784 bytes)"
	//config: default y
	//config: help
	//config: Print ascii table.

miscutils/bc.c+2 -2

@@ -14,7 +14,7 @@
	#define SANITY_CHECKS 1

	//config:config BC
-	//config: bool "bc (45 kb)"
+	//config: bool "bc (38 kb)"
	//config: default y
	//config: select FEATURE_DC_BIG
	//config: help
@@ -38,7 +38,7 @@
	//config: 5) "read()" accepts expressions, not only numeric literals.
	//config:
	//config:config DC
-	//config: bool "dc (36 kb)"
+	//config: bool "dc (29 kb)"
	//config: default y
	//config: help
	//config: dc is a reverse-polish notation command-line calculator which

miscutils/beep.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config BEEP
-	//config: bool "beep (2.4 kb)"
+	//config: bool "beep (2.7 kb)"
	//config: default y
	//config: help
	//config: The beep applets beeps in a given freq/Hz.

miscutils/chat.c+1 -1

@@ -8,7 +8,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config CHAT
-	//config: bool "chat (6.3 kb)"
+	//config: bool "chat (6.7 kb)"
	//config: default y
	//config: help
	//config: Simple chat utility.

miscutils/crond.c+1 -1

@@ -9,7 +9,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config CROND
-	//config: bool "crond (14 kb)"
+	//config: bool "crond (15 kb)"
	//config: default y
	//config: select FEATURE_SYSLOG
	//config: help

miscutils/devmem.c+1 -1

@@ -4,7 +4,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config DEVMEM
-	//config: bool "devmem (2.5 kb)"
+	//config: bool "devmem (2.7 kb)"
	//config: default y
	//config: help
	//config: devmem is a small program that reads and writes from physical

miscutils/hexedit.c+1 -1

@@ -4,7 +4,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config HEXEDIT
-	//config: bool "hexedit (21 kb)"
+	//config: bool "hexedit (15 kb)"
	//config: default y
	//config: help
	//config: Edit file in hexadecimal.

miscutils/i2c_tools.c+5 -5

@@ -9,31 +9,31 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config I2CGET
-	//config: bool "i2cget (5.5 kb)"
+	//config: bool "i2cget (5.7 kb)"
	//config: default y
	//config: help
	//config: Read from I2C/SMBus chip registers.
	//config:
	//config:config I2CSET
-	//config: bool "i2cset (6.7 kb)"
+	//config: bool "i2cset (6.9 kb)"
	//config: default y
	//config: help
	//config: Set I2C registers.
	//config:
	//config:config I2CDUMP
-	//config: bool "i2cdump (7.1 kb)"
+	//config: bool "i2cdump (7.2 kb)"
	//config: default y
	//config: help
	//config: Examine I2C registers.
	//config:
	//config:config I2CDETECT
-	//config: bool "i2cdetect (7.1 kb)"
+	//config: bool "i2cdetect (7.3 kb)"
	//config: default y
	//config: help
	//config: Detect I2C chips.
	//config:
	//config:config I2CTRANSFER
-	//config: bool "i2ctransfer (4.0 kb)"
+	//config: bool "i2ctransfer (5.5 kb)"
	//config: default y
	//config: help
	//config: Send user-defined I2C messages in one transfer.

miscutils/lsscsi.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config LSSCSI
-	//config: bool "lsscsi (2.5 kb)"
+	//config: bool "lsscsi (2.9 kb)"
	//config: default y
	//config: help
	//config: lsscsi is a utility for displaying information about SCSI buses in the

miscutils/makedevs.c+1 -1

@@ -7,7 +7,7 @@
	* known bugs: can't deal with alpha ranges
	*/
	//config:config MAKEDEVS
-	//config: bool "makedevs (9.2 kb)"
+	//config: bool "makedevs (9.4 kb)"
	//config: default y
	//config: help
	//config: 'makedevs' is a utility used to create a batch of devices with

miscutils/microcom.c+1 -1

@@ -8,7 +8,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config MICROCOM
-	//config: bool "microcom (5.7 kb)"
+	//config: bool "microcom (5.9 kb)"
	//config: default y
	//config: help
	//config: The poor man's minicom utility for chatting with serial port devices.

miscutils/mt.c+1 -1

@@ -3,7 +3,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config MT
-	//config: bool "mt (2.5 kb)"
+	//config: bool "mt (2.7 kb)"
	//config: default y
	//config: help
	//config: mt is used to control tape devices. You can use the mt utility

miscutils/nandwrite.c+2 -2

@@ -8,13 +8,13 @@
	* TODO: add support for large (>4GB) MTD devices
	*/
	//config:config NANDWRITE
-	//config: bool "nandwrite (4.8 kb)"
+	//config: bool "nandwrite (5 kb)"
	//config: default y
	//config: help
	//config: Write to the specified MTD device, with bad blocks awareness
	//config:
	//config:config NANDDUMP
-	//config: bool "nanddump (5.2 kb)"
+	//config: bool "nanddump (5.4 kb)"
	//config: default y
	//config: help
	//config: Dump the content of raw NAND chip

miscutils/partprobe.c+1 -1

@@ -5,7 +5,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config PARTPROBE
-	//config: bool "partprobe (3.5 kb)"
+	//config: bool "partprobe (3.7 kb)"
	//config: default y
	//config: help
	//config: Ask kernel to rescan partition table.

miscutils/raidautorun.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config RAIDAUTORUN
-	//config: bool "raidautorun (1.3 kb)"
+	//config: bool "raidautorun (1.6 kb)"
	//config: default y
	//config: help
	//config: raidautorun tells the kernel md driver to

miscutils/readahead.c+1 -1

@@ -10,7 +10,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config READAHEAD
-	//config: bool "readahead (1.5 kb)"
+	//config: bool "readahead (1.7 kb)"
	//config: default y
	//config: depends on LFS
	//config: help

miscutils/runlevel.c+1 -1

@@ -12,7 +12,7 @@
	* initially busyboxified by Bernhard Reutner-Fischer
	*/
	//config:config RUNLEVEL
-	//config: bool "runlevel (559 bytes)"
+	//config: bool "runlevel (837 bytes)"
	//config: default y
	//config: depends on FEATURE_UTMP
	//config: help

miscutils/rx.c+1 -1

@@ -15,7 +15,7 @@
	* This was originally written for blob and then adapted for busybox.
	*/
	//config:config RX
-	//config: bool "rx (2.9 kb)"
+	//config: bool "rx (3.2 kb)"
	//config: default y
	//config: help
	//config: Receive files using the Xmodem protocol.

miscutils/seedrng.c+1 -1

@@ -20,7 +20,7 @@
	* This is based on code from <https://git.zx2c4.com/seedrng/about/>.
	*/
	//config:config SEEDRNG
-	//config: bool "seedrng (1.3 kb)"
+	//config: bool "seedrng (9.1 kb)"
	//config: default y
	//config: help
	//config: Seed the kernel RNG from seed files, meant to be called

miscutils/setfattr.c+1 -1

@@ -6,7 +6,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config SETFATTR
-	//config: bool "setfattr (3.7 kb)"
+	//config: bool "setfattr (3.9 kb)"
	//config: default y
	//config: help
	//config: Set/delete extended attributes on files

miscutils/setserial.c+1 -1

@@ -8,7 +8,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config SETSERIAL
-	//config: bool "setserial (6.9 kb)"
+	//config: bool "setserial (7.1 kb)"
	//config: default y
	//config: help
	//config: Retrieve or set Linux serial port.

miscutils/strings.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config STRINGS
-	//config: bool "strings (4.6 kb)"
+	//config: bool "strings (4.8 kb)"
	//config: default y
	//config: help
	//config: strings prints the printable character sequences for each file

miscutils/time.c+1 -1

@@ -10,7 +10,7 @@
	* Heavily modified for busybox by Erik Andersen <[email protected]>
	*/
	//config:config TIME
-	//config: bool "time (6.8 kb)"
+	//config: bool "time (8.1 kb)"
	//config: default y
	//config: help
	//config: The time command runs the specified program with the given arguments.

miscutils/tree.c+1 -1

@@ -5,7 +5,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config TREE
-	//config: bool "tree (0.6 kb)"
+	//config: bool "tree (2.5 kb)"
	//config: default y
	//config: help
	//config: List files and directories in a tree structure.

miscutils/ts.c+1 -1

@@ -4,7 +4,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config TS
-	//config: bool "ts (450 bytes)"
+	//config: bool "ts (4.4 kb)"
	//config: default y

	//applet:IF_TS(APPLET(ts, BB_DIR_USR_BIN, BB_SUID_DROP))

miscutils/ttysize.c+1 -1

@@ -10,7 +10,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config TTYSIZE
-	//config: bool "ttysize (432 bytes)"
+	//config: bool "ttysize (718 bytes)"
	//config: default y
	//config: help
	//config: A replacement for "stty size". Unlike stty, can report only width,

miscutils/ubi_tools.c+6 -6

@@ -4,37 +4,37 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config UBIATTACH
-	//config: bool "ubiattach (4.2 kb)"
+	//config: bool "ubiattach (4.5 kb)"
	//config: default y
	//config: help
	//config: Attach MTD device to an UBI device.
	//config:
	//config:config UBIDETACH
-	//config: bool "ubidetach (4.1 kb)"
+	//config: bool "ubidetach (4.3 kb)"
	//config: default y
	//config: help
	//config: Detach MTD device from an UBI device.
	//config:
	//config:config UBIMKVOL
-	//config: bool "ubimkvol (5.3 kb)"
+	//config: bool "ubimkvol (5.5 kb)"
	//config: default y
	//config: help
	//config: Create a UBI volume.
	//config:
	//config:config UBIRMVOL
-	//config: bool "ubirmvol (4.9 kb)"
+	//config: bool "ubirmvol (5.1 kb)"
	//config: default y
	//config: help
	//config: Delete a UBI volume.
	//config:
	//config:config UBIRSVOL
-	//config: bool "ubirsvol (4.2 kb)"
+	//config: bool "ubirsvol (4.4 kb)"
	//config: default y
	//config: help
	//config: Resize a UBI volume.
	//config:
	//config:config UBIUPDATEVOL
-	//config: bool "ubiupdatevol (5.2 kb)"
+	//config: bool "ubiupdatevol (5.6 kb)"
	//config: default y
	//config: help
	//config: Update a UBI volume.

miscutils/ubirename.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config UBIRENAME
-	//config: bool "ubirename (2.4 kb)"
+	//config: bool "ubirename (2.7 kb)"
	//config: default y
	//config: help
	//config: Utility to rename UBI volumes

miscutils/volname.c+1 -1

@@ -28,7 +28,7 @@
	* Matthew Stoltenberg <[email protected]>
	*/
	//config:config VOLNAME
-	//config: bool "volname (1.6 kb)"
+	//config: bool "volname (1.9 kb)"
	//config: default y
	//config: help
	//config: Prints a CD-ROM volume name.

miscutils/watchdog.c+1 -1

@@ -9,7 +9,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config WATCHDOG
-	//config: bool "watchdog (5.3 kb)"
+	//config: bool "watchdog (5.7 kb)"
	//config: default y
	//config: help
	//config: The watchdog utility is used with hardware or software watchdog

modutils/lsmod.c+1 -1

@@ -8,7 +8,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config LSMOD
-	//config: bool "lsmod (1.9 kb)"
+	//config: bool "lsmod (2.1 kb)"
	//config: default y
	//config: help
	//config: lsmod is used to display a list of loaded modules.

modutils/modprobe.c+1 -1

@@ -8,7 +8,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config MODPROBE
-	//config: bool "modprobe (28 kb)"
+	//config: bool "modprobe (27 kb)"
	//config: default y
	//config: help
	//config: Handle the loading of modules, and their dependencies on a high

modutils/rmmod.c+1 -1

@@ -8,7 +8,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config RMMOD
-	//config: bool "rmmod (3.3 kb)"
+	//config: bool "rmmod (3.5 kb)"
	//config: default y
	//config: help
	//config: rmmod is used to unload specified modules from the kernel.

networking/arping.c+1 -1

@@ -6,7 +6,7 @@
	* Busybox port: Nick Fedchik <[email protected]>
	*/
	//config:config ARPING
-	//config: bool "arping (9 kb)"
+	//config: bool "arping (9.1 kb)"
	//config: default y
	//config: help
	//config: Ping hosts by ARP packets.

networking/brctl.c+1 -1

@@ -10,7 +10,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config BRCTL
-	//config: bool "brctl (4.7 kb)"
+	//config: bool "brctl (9.9 kb)"
	//config: default y
	//config: help
	//config: Manage ethernet bridges.

networking/dnsd.c+1 -1

@@ -17,7 +17,7 @@
	* the first porting of oao' scdns to busybox also.
	*/
	//config:config DNSD
-	//config: bool "dnsd (9.8 kb)"
+	//config: bool "dnsd (10 kb)"
	//config: default y
	//config: help
	//config: Small and static DNS server daemon.

networking/ether-wake.c+1 -1

@@ -64,7 +64,7 @@
	* filter. That configuration consumes more power.
	*/
	//config:config ETHER_WAKE
-	//config: bool "ether-wake (4.9 kb)"
+	//config: bool "ether-wake (5.2 kb)"
	//config: default y
	//config: help
	//config: Send a magic packet to wake up sleeping machines.

networking/ftpgetput.c+2 -2

@@ -13,13 +13,13 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config FTPGET
-	//config: bool "ftpget (7.8 kb)"
+	//config: bool "ftpget (7.9 kb)"
	//config: default y
	//config: help
	//config: Retrieve a remote file via FTP.
	//config:
	//config:config FTPPUT
-	//config: bool "ftpput (7.5 kb)"
+	//config: bool "ftpput (7.6 kb)"
	//config: default y
	//config: help
	//config: Store a remote file via FTP.

networking/hostname.c+2 -2

@@ -10,13 +10,13 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config HOSTNAME
-	//config: bool "hostname (5.5 kb)"
+	//config: bool "hostname (5.8 kb)"
	//config: default y
	//config: help
	//config: Show or set the system's host name.
	//config:
	//config:config DNSDOMAINNAME
-	//config: bool "dnsdomainname (3.6 kb)"
+	//config: bool "dnsdomainname (3.8 kb)"
	//config: default y
	//config: help
	//config: Alias to "hostname -d".

networking/ifplugd.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config IFPLUGD
-	//config: bool "ifplugd (10 kb)"
+	//config: bool "ifplugd (11 kb)"
	//config: default y
	//config: help
	//config: Network interface plug detection daemon.

networking/ip.c+3 -3

@@ -19,7 +19,7 @@
	//config: trying to be portable, it's better to use "ip CMD" forms.
	//config:
	//config:config IPADDR
-	//config: bool "ipaddr (14 kb)"
+	//config: bool "ipaddr (15 kb)"
	//config: default y
	//config: select FEATURE_IP_ADDRESS
	//config: help
@@ -40,7 +40,7 @@
	//config: Short form of "ip route"
	//config:
	//config:config IPTUNNEL
-	//config: bool "iptunnel (9.6 kb)"
+	//config: bool "iptunnel (9.8 kb)"
	//config: default y
	//config: select FEATURE_IP_TUNNEL
	//config: help
@@ -54,7 +54,7 @@
	//config: Short form of "ip rule"
	//config:
	//config:config IPNEIGH
-	//config: bool "ipneigh (8.3 kb)"
+	//config: bool "ipneigh (8.6 kb)"
	//config: default y
	//config: select FEATURE_IP_NEIGH
	//config: help

networking/ipcalc.c+1 -1

@@ -12,7 +12,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config IPCALC
-	//config: bool "ipcalc (4.4 kb)"
+	//config: bool "ipcalc (4.6 kb)"
	//config: default y
	//config: help
	//config: ipcalc takes an IP address and netmask and calculates the

networking/isrv_identd.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config FAKEIDENTD
-	//config: bool "fakeidentd (8.7 kb)"
+	//config: bool "fakeidentd (9 kb)"
	//config: default y
	//config: select FEATURE_SYSLOG
	//config: help

networking/nameif.c+1 -1

@@ -10,7 +10,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config NAMEIF
-	//config: bool "nameif (6.6 kb)"
+	//config: bool "nameif (6.9 kb)"
	//config: default y
	//config: select FEATURE_SYSLOG
	//config: help

networking/nbd-client.c+1 -1

@@ -4,7 +4,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config NBDCLIENT
-	//config: bool "nbd-client (6 kb)"
+	//config: bool "nbd-client (6.3 kb)"
	//config: default y
	//config: help
	//config: Network block device client

networking/nslookup.c+1 -1

@@ -1,7 +1,7 @@
	/* vi: set sw=4 ts=4: */

	//config:config NSLOOKUP
-	//config: bool "nslookup (9.7 kb)"
+	//config: bool "nslookup (10 kb)"
	//config: default y
	//config: help
	//config: nslookup is a tool to query Internet name servers.

networking/ntpd.c+1 -1

@@ -41,7 +41,7 @@
	***********************************************************************
	*/
	//config:config NTPD
-	//config: bool "ntpd (22 kb)"
+	//config: bool "ntpd (23 kb)"
	//config: default y
	//config: help
	//config: The NTP client/server daemon.

networking/pscan.c+1 -1

@@ -6,7 +6,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config PSCAN
-	//config: bool "pscan (6 kb)"
+	//config: bool "pscan (6.2 kb)"
	//config: default y
	//config: help
	//config: Simple network port scanner.

networking/route.c+1 -1

@@ -25,7 +25,7 @@
	* remove ridiculous amounts of bloat.
	*/
	//config:config ROUTE
-	//config: bool "route (8.7 kb)"
+	//config: bool "route (9 kb)"
	//config: default y
	//config: help
	//config: Route displays or manipulates the kernel's IP routing tables.

networking/slattach.c+1 -1

@@ -13,7 +13,7 @@
	* - The -F options allows disabling of RTS/CTS flow control.
	*/
	//config:config SLATTACH
-	//config: bool "slattach (6.2 kb)"
+	//config: bool "slattach (6.3 kb)"
	//config: default y
	//config: help
	//config: slattach configures serial line as SLIP network interface.

networking/ssl_client.c+1 -1

@@ -4,7 +4,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config SSL_CLIENT
-	//config: bool "ssl_client (25 kb)"
+	//config: bool "ssl_client (28 kb)"
	//config: default y
	//config: select TLS
	//config: help

networking/telnetd.c+1 -1

@@ -21,7 +21,7 @@
	* Set process group corrections, initial busybox port
	*/
	//config:config TELNETD
-	//config: bool "telnetd (12 kb)"
+	//config: bool "telnetd (13 kb)"
	//config: default y
	//config: select FEATURE_SYSLOG
	//config: help

networking/traceroute.c+1 -1

@@ -216,7 +216,7 @@
	//config: Utility to trace the route of IP packets.
	//config:
	//config:config TRACEROUTE6
-	//config: bool "traceroute6 (13 kb)"
+	//config: bool "traceroute6 (12 kb)"
	//config: default y
	//config: depends on FEATURE_IPV6
	//config: help

networking/tunctl.c+1 -1

@@ -10,7 +10,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config TUNCTL
-	//config: bool "tunctl (6.2 kb)"
+	//config: bool "tunctl (6.4 kb)"
	//config: default y
	//config: help
	//config: tunctl creates or deletes tun devices.

networking/udhcp/Config.src+2 -2

@@ -50,7 +50,7 @@ config DHCPD_LEASES_FILE
	of the file. Normally it is safe to leave it untouched.

	config DUMPLEASES
-	bool "dumpleases (5.1 kb)"
+	bool "dumpleases (5.3 kb)"
	default y
	help
	dumpleases displays the leases written out by the udhcpd.
@@ -58,7 +58,7 @@ config DUMPLEASES
	by the absolute time that it expires in seconds from epoch.

	config DHCPRELAY
-	bool "dhcprelay (5.2 kb)"
+	bool "dhcprelay (5.5 kb)"
	default y
	help
	dhcprelay listens for DHCP requests on one or more interfaces

networking/vconfig.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config VCONFIG
-	//config: bool "vconfig (2.3 kb)"
+	//config: bool "vconfig (2.6 kb)"
	//config: default y
	//config: help
	//config: Creates, removes, and configures VLAN interfaces

networking/wget.c+1 -1

@@ -9,7 +9,7 @@
	* Kuhn's copyrights are licensed GPLv2-or-later. File as a whole remains GPLv2.
	*/
	//config:config WGET
-	//config: bool "wget (38 kb)"
+	//config: bool "wget (41 kb)"
	//config: default y
	//config: help
	//config: wget is a utility for non-interactive download of files from HTTP

networking/whois.c+1 -1

@@ -10,7 +10,7 @@
	* Add proxy support
	*/
	//config:config WHOIS
-	//config: bool "whois (6.3 kb)"
+	//config: bool "whois (6.5 kb)"
	//config: default y
	//config: help
	//config: whois is a client for the whois directory service

networking/zcip.c+1 -1

@@ -14,7 +14,7 @@
	* certainly be used. Its naming is built over multicast DNS.
	*/
	//config:config ZCIP
-	//config: bool "zcip (8.4 kb)"
+	//config: bool "zcip (8.7 kb)"
	//config: default y
	//config: select FEATURE_SYSLOG
	//config: help

printutils/lpd.c+1 -1

@@ -70,7 +70,7 @@
	* mv -f ./"$DATAFILE" save/
	*/
	//config:config LPD
-	//config: bool "lpd (5.5 kb)"
+	//config: bool "lpd (5.7 kb)"
	//config: default y
	//config: help
	//config: lpd is a print spooling daemon.

printutils/lpr.c+2 -2

@@ -12,13 +12,13 @@
	* See RFC 1179 for protocol description.
	*/
	//config:config LPR
-	//config: bool "lpr (9.9 kb)"
+	//config: bool "lpr (10 kb)"
	//config: default y
	//config: help
	//config: lpr sends files (or standard input) to a print spooling daemon.
	//config:
	//config:config LPQ
-	//config: bool "lpq (9.9 kb)"
+	//config: bool "lpq (10 kb)"
	//config: default y
	//config: help
	//config: lpq is a print spool queue examination and manipulation program.

procps/free.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config FREE
-	//config: bool "free (3.1 kb)"
+	//config: bool "free (3.8 kb)"
	//config: default y
	//config: help
	//config: free displays the total amount of free and used physical and swap

procps/fuser.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config FUSER
-	//config: bool "fuser (7 kb)"
+	//config: bool "fuser (7.3 kb)"
	//config: default y
	//config: help
	//config: fuser lists all PIDs (Process IDs) that currently have a given

procps/iostat.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config IOSTAT
-	//config: bool "iostat (7.6 kb)"
+	//config: bool "iostat (8 kb)"
	//config: default y
	//config: help
	//config: Report CPU and I/O statistics

procps/kill.c+3 -3

@@ -8,7 +8,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config KILL
-	//config: bool "kill (3.1 kb)"
+	//config: bool "kill (3.4 kb)"
	//config: default y
	//config: help
	//config: The command kill sends the specified signal to the specified
@@ -16,7 +16,7 @@
	//config: signal is sent.
	//config:
	//config:config KILLALL
-	//config: bool "killall (5.6 kb)"
+	//config: bool "killall (5.9 kb)"
	//config: default y
	//config: help
	//config: killall sends a signal to all processes running any of the
@@ -24,7 +24,7 @@
	//config: sent.
	//config:
	//config:config KILLALL5
-	//config: bool "killall5 (5.3 kb)"
+	//config: bool "killall5 (5.6 kb)"
	//config: default y
	//config: help
	//config: The SystemV killall command. killall5 sends a signal

procps/lsof.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config LSOF
-	//config: bool "lsof (3.4 kb)"
+	//config: bool "lsof (3.7 kb)"
	//config: default y
	//config: help
	//config: Show open files in the format of:

procps/mpstat.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config MPSTAT
-	//config: bool "mpstat (9.8 kb)"
+	//config: bool "mpstat (10 kb)"
	//config: default y
	//config: help
	//config: Per-processor statistics

procps/nmeter.c+1 -1

@@ -6,7 +6,7 @@
	* Contact me: [email protected]
	*/
	//config:config NMETER
-	//config: bool "nmeter (11 kb)"
+	//config: bool "nmeter (12 kb)"
	//config: default y
	//config: help
	//config: Prints selected system stats continuously, one line per update.

procps/pgrep.c+2 -2

@@ -7,13 +7,13 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config PGREP
-	//config: bool "pgrep (6.5 kb)"
+	//config: bool "pgrep (6.8 kb)"
	//config: default y
	//config: help
	//config: Look for processes by name.
	//config:
	//config:config PKILL
-	//config: bool "pkill (7.5 kb)"
+	//config: bool "pkill (7.8 kb)"
	//config: default y
	//config: help
	//config: Send signals to processes by name.

procps/pidof.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config PIDOF
-	//config: bool "pidof (6.3 kb)"
+	//config: bool "pidof (6.5 kb)"
	//config: default y
	//config: help
	//config: Pidof finds the process id's (pids) of the named programs. It prints

procps/pmap.c+1 -1

@@ -8,7 +8,7 @@
	* for details.
	*/
	//config:config PMAP
-	//config: bool "pmap (6 kb)"
+	//config: bool "pmap (6.2 kb)"
	//config: default y
	//config: help
	//config: Display processes' memory mappings.

procps/powertop.c+1 -1

@@ -9,7 +9,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config POWERTOP
-	//config: bool "powertop (9.6 kb)"
+	//config: bool "powertop (9.9 kb)"
	//config: default y
	//config: help
	//config: Analyze power consumption on Intel-based laptops

procps/ps.c+1 -1

@@ -9,7 +9,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config PS
-	//config: bool "ps (11 kb)"
+	//config: bool "ps (12 kb)"
	//config: default y
	//config: help
	//config: ps gives a snapshot of the current processes.

procps/pstree.c+1 -1

@@ -10,7 +10,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config PSTREE
-	//config: bool "pstree (9.3 kb)"
+	//config: bool "pstree (9.4 kb)"
	//config: default y
	//config: help
	//config: Display a tree of processes.

procps/pwdx.c+1 -1

@@ -8,7 +8,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config PWDX
-	//config: bool "pwdx (3.7 kb)"
+	//config: bool "pwdx (3.9 kb)"
	//config: default y
	//config: help
	//config: Report current working directory of a process

procps/smemcap.c+1 -1

@@ -8,7 +8,7 @@
	herein by reference.
	*/
	//config:config SMEMCAP
-	//config: bool "smemcap (2.5 kb)"
+	//config: bool "smemcap (3 kb)"
	//config: default y
	//config: help
	//config: smemcap is a tool for capturing process data for smem,

procps/sysctl.c+1 -1

@@ -11,7 +11,7 @@
	* v1.01.1 - busybox applet aware by <[email protected]>
	*/
	//config:config BB_SYSCTL
-	//config: bool "sysctl (7.4 kb)"
+	//config: bool "sysctl (7.9 kb)"
	//config: default y
	//config: help
	//config: Configure kernel parameters at runtime.

procps/uptime.c+1 -1

@@ -12,7 +12,7 @@
	* Added FEATURE_UPTIME_UTMP_SUPPORT flag.
	*/
	//config:config UPTIME
-	//config: bool "uptime (3.7 kb)"
+	//config: bool "uptime (4 kb)"
	//config: default y
	//config: help
	//config: uptime gives a one line display of the current time, how long

procps/watch.c+1 -1

@@ -8,7 +8,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config WATCH
-	//config: bool "watch (4.4 kb)"
+	//config: bool "watch (5.2 kb)"
	//config: default y
	//config: help
	//config: watch is used to execute a program periodically, showing

runit/chpst.c+5 -5

@@ -28,33 +28,33 @@ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	/* Busyboxed by Denys Vlasenko <[email protected]> */

	//config:config CHPST
-	//config: bool "chpst (9 kb)"
+	//config: bool "chpst (9.2 kb)"
	//config: default y
	//config: help
	//config: chpst changes the process state according to the given options, and
	//config: execs specified program.
	//config:
	//config:config SETUIDGID
-	//config: bool "setuidgid (4 kb)"
+	//config: bool "setuidgid (4.2 kb)"
	//config: default y
	//config: help
	//config: Sets soft resource limits as specified by options
	//config:
	//config:config ENVUIDGID
-	//config: bool "envuidgid (3.9 kb)"
+	//config: bool "envuidgid (4.1 kb)"
	//config: default y
	//config: help
	//config: Sets $UID to account's uid and $GID to account's gid
	//config:
	//config:config ENVDIR
-	//config: bool "envdir (2.5 kb)"
+	//config: bool "envdir (2.9 kb)"
	//config: default y
	//config: help
	//config: Sets various environment variables as specified by files
	//config: in the given directory
	//config:
	//config:config SOFTLIMIT
-	//config: bool "softlimit (4.5 kb)"
+	//config: bool "softlimit (4.7 kb)"
	//config: default y
	//config: help
	//config: Sets soft resource limits as specified by options

runit/runsv.c+1 -1

@@ -28,7 +28,7 @@ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	/* Busyboxed by Denys Vlasenko <[email protected]> */

	//config:config RUNSV
-	//config: bool "runsv (7.8 kb)"
+	//config: bool "runsv (8.2 kb)"
	//config: default y
	//config: help
	//config: runsv starts and monitors a service and optionally an appendant log

runit/runsvdir.c+1 -1

@@ -28,7 +28,7 @@ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	/* Busyboxed by Denys Vlasenko <[email protected]> */

	//config:config RUNSVDIR
-	//config: bool "runsvdir (6.3 kb)"
+	//config: bool "runsvdir (6.6 kb)"
	//config: default y
	//config: help
	//config: runsvdir starts a runsv process for each subdirectory, or symlink to

runit/sv.c+3 -3

@@ -154,7 +154,7 @@ Exit Codes
	/* Busyboxed by Denys Vlasenko <[email protected]> */

	//config:config SV
-	//config: bool "sv (8.5 kb)"
+	//config: bool "sv (8.7 kb)"
	//config: default y
	//config: help
	//config: sv reports the current status and controls the state of services
@@ -169,14 +169,14 @@ Exit Codes
	//config: Defaults to "/var/service"
	//config:
	//config:config SVC
-	//config: bool "svc (8.4 kb)"
+	//config: bool "svc (8.7 kb)"
	//config: default y
	//config: help
	//config: svc controls the state of services monitored by the runsv supervisor.
	//config: It is compatible with daemontools command with the same name.
	//config:
	//config:config SVOK
-	//config: bool "svok (1.5 kb)"
+	//config: bool "svok (1.8 kb)"
	//config: default y
	//config: help
	//config: svok checks whether runsv supervisor is running.

shell/ash.c+1 -1

@@ -20,7 +20,7 @@
	//config: depends on !NOMMU
	//config:
	//config:config ASH
-	//config: bool "ash (78 kb)"
+	//config: bool "ash (80 kb)"
	//config: default y
	//config: depends on !NOMMU
	//config: select SHELL_ASH

shell/cttyhack.c+1 -1

@@ -5,7 +5,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config CTTYHACK
-	//config: bool "cttyhack (2.4 kb)"
+	//config: bool "cttyhack (2.7 kb)"
	//config: default y
	//config: help
	//config: One common problem reported on the mailing list is the "can't

shell/hush.c+1 -1

@@ -91,7 +91,7 @@
	* in word = GLOB, quoting should be significant on char-by-char basis: acd""
	*/
	//config:config HUSH
-	//config: bool "hush (68 kb)"
+	//config: bool "hush (70 kb)"
	//config: default y
	//config: select SHELL_HUSH
	//config: help

sysklogd/klogd.c+1 -1

@@ -17,7 +17,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config KLOGD
-	//config: bool "klogd (5.7 kb)"
+	//config: bool "klogd (6.2 kb)"
	//config: default y
	//config: help
	//config: klogd is a utility which intercepts and logs all

sysklogd/logger.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config LOGGER
-	//config: bool "logger (6.3 kb)"
+	//config: bool "logger (6.5 kb)"
	//config: default y
	//config: select FEATURE_SYSLOG
	//config: help

sysklogd/logread.c+1 -1

@@ -9,7 +9,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config LOGREAD
-	//config: bool "logread (4.8 kb)"
+	//config: bool "logread (5 kb)"
	//config: default y
	//WRONG: it should be compilable without SYSLOG=y:
	//WRONG: depends on FEATURE_IPC_SYSLOG

sysklogd/syslogd.c+1 -1

@@ -13,7 +13,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config SYSLOGD
-	//config: bool "syslogd (13 kb)"
+	//config: bool "syslogd (14 kb)"
	//config: default y
	//config: help
	//config: The syslogd utility is used to record logs of all the

util-linux/acpid.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config ACPID
-	//config: bool "acpid (9 kb)"
+	//config: bool "acpid (9.3 kb)"
	//config: default y
	//config: help
	//config: acpid listens to ACPI events coming either in textual form from

util-linux/blkdiscard.c+1 -1

@@ -6,7 +6,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config BLKDISCARD
-	//config: bool "blkdiscard (4.3 kb)"
+	//config: bool "blkdiscard (4.6 kb)"
	//config: default y
	//config: help
	//config: blkdiscard discards sectors on a given device.

util-linux/blockdev.c+1 -1

@@ -6,7 +6,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config BLOCKDEV
-	//config: bool "blockdev (2.3 kb)"
+	//config: bool "blockdev (2.6 kb)"
	//config: default y
	//config: help
	//config: Performs some ioctls with block devices.

util-linux/cal.c+1 -1

@@ -11,7 +11,7 @@
	* Major size reduction... over 50% (>1.5k) on i386.
	*/
	//config:config CAL
-	//config: bool "cal (5.8 kb)"
+	//config: bool "cal (6.1 kb)"
	//config: default y
	//config: help
	//config: cal is used to display a monthly calendar.

util-linux/chrt.c+1 -1

@@ -6,7 +6,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config CHRT
-	//config: bool "chrt (4.7 kb)"
+	//config: bool "chrt (5.1 kb)"
	//config: default y
	//config: help
	//config: Manipulate real-time attributes of a process.

util-linux/dmesg.c+1 -1

@@ -9,7 +9,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config DMESG
-	//config: bool "dmesg (3.7 kb)"
+	//config: bool "dmesg (3.9 kb)"
	//config: default y
	//config: help
	//config: dmesg is used to examine or control the kernel ring buffer. When the

util-linux/eject.c+1 -1

@@ -13,7 +13,7 @@
	* Most of the dirty work blatantly ripped off from cat.c =)
	*/
	//config:config EJECT
-	//config: bool "eject (4 kb)"
+	//config: bool "eject (4.3 kb)"
	//config: default y
	//config: help
	//config: Used to eject cdroms. (defaults to /dev/cdrom)

util-linux/fallocate.c+1 -1

@@ -5,7 +5,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config FALLOCATE
-	//config: bool "fallocate (4.1 kb)"
+	//config: bool "fallocate (4.3 kb)"
	//config: default y
	//config: help
	//config: Preallocate space for files.

util-linux/fatattr.c+1 -1

@@ -9,7 +9,7 @@
	* Public License
	*/
	//config:config FATATTR
-	//config: bool "fatattr (1.9 kb)"
+	//config: bool "fatattr (2.2 kb)"
	//config: default y
	//config: help
	//config: fatattr lists or changes the file attributes on a fat file system.

util-linux/fbset.c+1 -1

@@ -12,7 +12,7 @@
	* Geert Uytterhoeven ([email protected])
	*/
	//config:config FBSET
-	//config: bool "fbset (5.9 kb)"
+	//config: bool "fbset (6.2 kb)"
	//config: default y
	//config: help
	//config: fbset is used to show or change the settings of a Linux frame buffer

util-linux/fdformat.c+1 -1

@@ -6,7 +6,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config FDFORMAT
-	//config: bool "fdformat (4.4 kb)"
+	//config: bool "fdformat (4.7 kb)"
	//config: default y
	//config: help
	//config: fdformat is used to low-level format a floppy disk.

util-linux/fdisk.c+1 -1

@@ -8,7 +8,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config FDISK
-	//config: bool "fdisk (37 kb)"
+	//config: bool "fdisk (31 kb)"
	//config: default y
	//config: help
	//config: The fdisk utility is used to divide hard disks into one or more

util-linux/findfs.c+1 -1

@@ -8,7 +8,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config FINDFS
-	//config: bool "findfs (12 kb)"
+	//config: bool "findfs (11 kb)"
	//config: default y
	//config: select VOLUMEID
	//config: help

util-linux/flock.c+1 -1

@@ -4,7 +4,7 @@
	* This is free software, licensed under the GNU General Public License v2.
	*/
	//config:config FLOCK
-	//config: bool "flock (6.3 kb)"
+	//config: bool "flock (6.5 kb)"
	//config: default y
	//config: help
	//config: Manage locks from shell scripts

util-linux/freeramdisk.c+2 -2

@@ -9,7 +9,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config FDFLUSH
-	//config: bool "fdflush (1.3 kb)"
+	//config: bool "fdflush (1.6 kb)"
	//config: default y
	//config: help
	//config: fdflush is only needed when changing media on slightly-broken
@@ -21,7 +21,7 @@
	//config: leave this disabled.
	//config:
	//config:config FREERAMDISK
-	//config: bool "freeramdisk (1.3 kb)"
+	//config: bool "freeramdisk (1.6 kb)"
	//config: default y
	//config: help
	//config: Linux allows you to create ramdisks. This utility allows you to

util-linux/fsfreeze.c+1 -1

@@ -5,7 +5,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config FSFREEZE
-	//config: bool "fsfreeze (3.5 kb)"
+	//config: bool "fsfreeze (3.7 kb)"
	//config: default y
	//config: select LONG_OPTS
	//config: help

util-linux/fstrim.c+1 -1

@@ -8,7 +8,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config FSTRIM
-	//config: bool "fstrim (4.4 kb)"
+	//config: bool "fstrim (4.6 kb)"
	//config: default y
	//config: help
	//config: Discard unused blocks on a mounted filesystem.

util-linux/getopt.c+1 -1

@@ -29,7 +29,7 @@
	* Replaced our_malloc with xmalloc and our_realloc with xrealloc
	*/
	//config:config GETOPT
-	//config: bool "getopt (5.8 kb)"
+	//config: bool "getopt (6 kb)"
	//config: default y
	//config: help
	//config: The getopt utility is used to break up (parse) options in command

util-linux/hexdump.c+2 -2

@@ -9,14 +9,14 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config HEXDUMP
-	//config: bool "hexdump (8.6 kb)"
+	//config: bool "hexdump (8.7 kb)"
	//config: default y
	//config: help
	//config: The hexdump utility is used to display binary data in a readable
	//config: way that is comparable to the output from most hex editors.
	//config:
	//config:config HD
-	//config: bool "hd (7.8 kb)"
+	//config: bool "hd (8.3 kb)"
	//config: default y
	//config: help
	//config: hd is an alias to hexdump -C.

util-linux/hexdump_xxd.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config XXD
-	//config: bool "xxd (8.9 kb)"
+	//config: bool "xxd (11 kb)"
	//config: default y
	//config: help
	//config: The xxd utility is used to display binary data in a readable

util-linux/hwclock.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config HWCLOCK
-	//config: bool "hwclock (5.8 kb)"
+	//config: bool "hwclock (5.9 kb)"
	//config: default y
	//config: help
	//config: The hwclock utility is used to read and set the hardware clock

util-linux/ionice.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config IONICE
-	//config: bool "ionice (3.8 kb)"
+	//config: bool "ionice (4 kb)"
	//config: default y
	//config: help
	//config: Set/set program io scheduling class and priority

util-linux/ipcrm.c+1 -1

@@ -8,7 +8,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config IPCRM
-	//config: bool "ipcrm (3.2 kb)"
+	//config: bool "ipcrm (3.5 kb)"
	//config: default y
	//config: help
	//config: The ipcrm utility allows the removal of System V interprocess

util-linux/ipcs.c+1 -1

@@ -8,7 +8,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config IPCS
-	//config: bool "ipcs (11 kb)"
+	//config: bool "ipcs (12 kb)"
	//config: default y
	//config: help
	//config: The ipcs utility is used to provide information on the currently

util-linux/last.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config LAST
-	//config: bool "last (6.1 kb)"
+	//config: bool "last (7.4 kb)"
	//config: default y
	//config: depends on FEATURE_WTMP
	//config: help

util-linux/losetup.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config LOSETUP
-	//config: bool "losetup (5.5 kb)"
+	//config: bool "losetup (6.2 kb)"
	//config: default y
	//config: help
	//config: losetup is used to associate or detach a loop device with a regular

util-linux/lspci.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config LSPCI
-	//config: bool "lspci (6.3 kb)"
+	//config: bool "lspci (6.4 kb)"
	//config: default y
	//config: help
	//config: lspci is a utility for displaying information about PCI buses in the

util-linux/lsusb.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config LSUSB
-	//config: bool "lsusb (4.2 kb)"
+	//config: bool "lsusb (4.4 kb)"
	//config: default y
	//config: help
	//config: lsusb is a utility for displaying information about USB buses in the

util-linux/mdev.c+1 -1

@@ -8,7 +8,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config MDEV
-	//config: bool "mdev (17 kb)"
+	//config: bool "mdev (20 kb)"
	//config: default y
	//config: help
	//config: mdev is a mini-udev implementation for dynamically creating device

util-linux/mesg.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config MESG
-	//config: bool "mesg (1.4 kb)"
+	//config: bool "mesg (1.8 kb)"
	//config: default y
	//config: help
	//config: Mesg controls access to your terminal by others. It is typically

util-linux/mkfs_vfat.c+2 -2

@@ -8,13 +8,13 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config MKDOSFS
-	//config: bool "mkdosfs (7.2 kb)"
+	//config: bool "mkdosfs (7.6 kb)"
	//config: default y
	//config: help
	//config: Utility to create FAT32 filesystems.
	//config:
	//config:config MKFS_VFAT
-	//config: bool "mkfs.vfat (7.2 kb)"
+	//config: bool "mkfs.vfat (7.6 kb)"
	//config: default y
	//config: help
	//config: Alias to "mkdosfs".

util-linux/mkswap.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config MKSWAP
-	//config: bool "mkswap (6.3 kb)"
+	//config: bool "mkswap (6.6 kb)"
	//config: default y
	//config: help
	//config: The mkswap utility is used to configure a file or disk partition as

util-linux/more.c+1 -1

@@ -14,7 +14,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config MORE
-	//config: bool "more (7 kb)"
+	//config: bool "more (7.2 kb)"
	//config: default y
	//config: help
	//config: more is a simple utility which allows you to read text one screen

util-linux/mount.c+1 -1

@@ -18,7 +18,7 @@
	//

	//config:config MOUNT
-	//config: bool "mount (23 kb)"
+	//config: bool "mount (24 kb)"
	//config: default y
	//config: help
	//config: All files and filesystems in Unix are arranged into one big directory

util-linux/mountpoint.c+1 -1

@@ -9,7 +9,7 @@
	* Based on sysvinit's mountpoint
	*/
	//config:config MOUNTPOINT
-	//config: bool "mountpoint (4.9 kb)"
+	//config: bool "mountpoint (5.1 kb)"
	//config: default y
	//config: help
	//config: mountpoint checks if the directory is a mountpoint.

util-linux/nsenter.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config NSENTER
-	//config: bool "nsenter (6.5 kb)"
+	//config: bool "nsenter (6.8 kb)"
	//config: default y
	//config: help
	//config: Run program with namespaces of other processes.

util-linux/pivot_root.c+1 -1

@@ -9,7 +9,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config PIVOT_ROOT
-	//config: bool "pivot_root (1.1 kb)"
+	//config: bool "pivot_root (1.4 kb)"
	//config: default y
	//config: help
	//config: The pivot_root utility swaps the mount points for the root filesystem

util-linux/rdate.c+1 -1

@@ -8,7 +8,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config RDATE
-	//config: bool "rdate (5.6 kb)"
+	//config: bool "rdate (5.9 kb)"
	//config: default y
	//config: help
	//config: The rdate utility allows you to synchronize the date and time of your

util-linux/rdev.c+1 -1

@@ -8,7 +8,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config RDEV
-	//config: bool "rdev (1.8 kb)"
+	//config: bool "rdev (2.1 kb)"
	//config: default y
	//config: help
	//config: Print the device node associated with the filesystem mounted at '/'.

util-linux/readprofile.c+1 -1

@@ -32,7 +32,7 @@
	* Paul Mundt <[email protected]>.
	*/
	//config:config READPROFILE
-	//config: bool "readprofile (7.1 kb)"
+	//config: bool "readprofile (7.5 kb)"
	//config: default y
	//config: help
	//config: This allows you to parse /proc/profile for basic profiling.

util-linux/renice.c+1 -1

@@ -18,7 +18,7 @@
	* following IDs (if any). Multiple switches are allowed.
	*/
	//config:config RENICE
-	//config: bool "renice (4.2 kb)"
+	//config: bool "renice (4.4 kb)"
	//config: default y
	//config: help
	//config: Renice alters the scheduling priority of one or more running

util-linux/rev.c+1 -1

@@ -6,7 +6,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config REV
-	//config: bool "rev (4.4 kb)"
+	//config: bool "rev (4.6 kb)"
	//config: default y
	//config: help
	//config: Reverse lines of a file or files.

util-linux/rtcwake.c+1 -1

@@ -23,7 +23,7 @@
	* That flag should not be needed on systems with adjtime support.
	*/
	//config:config RTCWAKE
-	//config: bool "rtcwake (6.8 kb)"
+	//config: bool "rtcwake (7.5 kb)"
	//config: default y
	//config: help
	//config: Enter a system sleep state until specified wakeup time.

util-linux/script.c+1 -1

@@ -11,7 +11,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config SCRIPT
-	//config: bool "script (8.6 kb)"
+	//config: bool "script (8.8 kb)"
	//config: default y
	//config: help
	//config: The script makes typescript of terminal session.

util-linux/scriptreplay.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config SCRIPTREPLAY
-	//config: bool "scriptreplay (2.4 kb)"
+	//config: bool "scriptreplay (2.6 kb)"
	//config: default y
	//config: help
	//config: This program replays a typescript, using timing information

util-linux/setarch.c+3 -3

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config SETARCH
-	//config: bool "setarch (3.6 kb)"
+	//config: bool "setarch (3.8 kb)"
	//config: default y
	//config: help
	//config: The linux32 utility is used to create a 32bit environment for the
@@ -16,13 +16,13 @@
	//config: (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
	//config:
	//config:config LINUX32
-	//config: bool "linux32 (3.3 kb)"
+	//config: bool "linux32 (3.6 kb)"
	//config: default y
	//config: help
	//config: Alias to "setarch linux32".
	//config:
	//config:config LINUX64
-	//config: bool "linux64 (3.3 kb)"
+	//config: bool "linux64 (3.5 kb)"
	//config: default y
	//config: help
	//config: Alias to "setarch linux64".

util-linux/setpriv.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config SETPRIV
-	//config: bool "setpriv (6.6 kb)"
+	//config: bool "setpriv (6.9 kb)"
	//config: default y
	//config: select LONG_OPTS
	//config: help

util-linux/setsid.c+1 -1

@@ -14,7 +14,7 @@
	* - busyboxed
	*/
	//config:config SETSID
-	//config: bool "setsid (3.6 kb)"
+	//config: bool "setsid (3.8 kb)"
	//config: default y
	//config: help
	//config: setsid runs a program in a new session

util-linux/switch_root.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config SWITCH_ROOT
-	//config: bool "switch_root (5.5 kb)"
+	//config: bool "switch_root (5.7 kb)"
	//config: default y
	//config: help
	//config: The switch_root utility is used from initramfs to select a new

util-linux/taskset.c+1 -1

@@ -6,7 +6,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config TASKSET
-	//config: bool "taskset (4.2 kb)"
+	//config: bool "taskset (5.6 kb)"
	//config: default y
	//config: help
	//config: Retrieve or set a processes's CPU affinity.

util-linux/uevent.c+1 -1

@@ -4,7 +4,7 @@
	* Licensed under GPLv2, see file LICENSE in this source tree.
	*/
	//config:config UEVENT
-	//config: bool "uevent (3.1 kb)"
+	//config: bool "uevent (3.5 kb)"
	//config: default y
	//config: help
	//config: uevent is a netlink listener for kernel uevent notifications

util-linux/unshare.c+1 -1

@@ -7,7 +7,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config UNSHARE
-	//config: bool "unshare (7.2 kb)"
+	//config: bool "unshare (7.3 kb)"
	//config: default y
	//config: depends on !NOMMU
	//config: select LONG_OPTS

util-linux/wall.c+1 -1

@@ -6,7 +6,7 @@
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/
	//config:config WALL
-	//config: bool "wall (2.6 kb)"
+	//config: bool "wall (2.9 kb)"
	//config: default y
	//config: depends on FEATURE_UTMP
	//config: help