hdparm: code shrink
No binary (build failed)
—
(log yok)
| @@ -127,62 +127,6 @@ | |
| #define CDROM 0x0005 | |
| - | #if ENABLE_FEATURE_HDPARM_GET_IDENTITY |
| - | static const char *const pkt_str[] = { |
| - | "Direct-access device", /* word 0, bits 12-8 = 00 */ |
| - | "Sequential-access device", /* word 0, bits 12-8 = 01 */ |
| - | "Printer", /* word 0, bits 12-8 = 02 */ |
| - | "Processor", /* word 0, bits 12-8 = 03 */ |
| - | "Write-once device", /* word 0, bits 12-8 = 04 */ |
| - | "CD-ROM", /* word 0, bits 12-8 = 05 */ |
| - | "Scanner", /* word 0, bits 12-8 = 06 */ |
| - | "Optical memory", /* word 0, bits 12-8 = 07 */ |
| - | "Medium changer", /* word 0, bits 12-8 = 08 */ |
| - | "Communications device", /* word 0, bits 12-8 = 09 */ |
| - | "ACS-IT8 device", /* word 0, bits 12-8 = 0a */ |
| - | "ACS-IT8 device", /* word 0, bits 12-8 = 0b */ |
| - | "Array controller", /* word 0, bits 12-8 = 0c */ |
| - | "Enclosure services", /* word 0, bits 12-8 = 0d */ |
| - | "Reduced block command device", /* word 0, bits 12-8 = 0e */ |
| - | "Optical card reader/writer", /* word 0, bits 12-8 = 0f */ |
| - | "", /* word 0, bits 12-8 = 10 */ |
| - | "", /* word 0, bits 12-8 = 11 */ |
| - | "", /* word 0, bits 12-8 = 12 */ |
| - | "", /* word 0, bits 12-8 = 13 */ |
| - | "", /* word 0, bits 12-8 = 14 */ |
| - | "", /* word 0, bits 12-8 = 15 */ |
| - | "", /* word 0, bits 12-8 = 16 */ |
| - | "", /* word 0, bits 12-8 = 17 */ |
| - | "", /* word 0, bits 12-8 = 18 */ |
| - | "", /* word 0, bits 12-8 = 19 */ |
| - | "", /* word 0, bits 12-8 = 1a */ |
| - | "", /* word 0, bits 12-8 = 1b */ |
| - | "", /* word 0, bits 12-8 = 1c */ |
| - | "", /* word 0, bits 12-8 = 1d */ |
| - | "", /* word 0, bits 12-8 = 1e */ |
| - | "Unknown", /* word 0, bits 12-8 = 1f */ |
| - | }; |
| - | |
| - | static const char *const ata1_cfg_str[] = { /* word 0 in ATA-1 mode */ |
| - | "Reserved", /* bit 0 */ |
| - | "hard sectored", /* bit 1 */ |
| - | "soft sectored", /* bit 2 */ |
| - | "not MFM encoded ", /* bit 3 */ |
| - | "head switch time > 15us", /* bit 4 */ |
| - | "spindle motor control option", /* bit 5 */ |
| - | "fixed drive", /* bit 6 */ |
| - | "removable drive", /* bit 7 */ |
| - | "disk xfer rate <= 5Mbs", /* bit 8 */ |
| - | "disk xfer rate > 5Mbs, <= 10Mbs", /* bit 9 */ |
| - | "disk xfer rate > 5Mbs", /* bit 10 */ |
| - | "rotational speed tol.", /* bit 11 */ |
| - | "data strobe offset option", /* bit 12 */ |
| - | "track offset option", /* bit 13 */ |
| - | "format speed tolerance gap reqd", /* bit 14 */ |
| - | "ATAPI" /* bit 14 */ |
| - | }; |
| - | #endif |
| - | |
| /* word 1: number of logical cylinders */ | |
| #define LCYLS_MAX 0x3fff /* maximum allowable value */ | |
| @@ -238,87 +182,6 @@ static const char *const ata1_cfg_str[] = { /* word 0 in ATA-1 mode */ | |
| /* word 81: minor version number */ | |
| #define MINOR_MAX 0x22 | |
| - | #if ENABLE_FEATURE_HDPARM_GET_IDENTITY |
| - | static const char *const minor_str[MINOR_MAX + 2] = { |
| - | /* word 81 value: */ |
| - | "Unspecified", /* 0x0000 */ |
| - | "ATA-1 X3T9.2 781D prior to rev.4", /* 0x0001 */ |
| - | "ATA-1 published, ANSI X3.221-1994", /* 0x0002 */ |
| - | "ATA-1 X3T9.2 781D rev.4", /* 0x0003 */ |
| - | "ATA-2 published, ANSI X3.279-1996", /* 0x0004 */ |
| - | "ATA-2 X3T10 948D prior to rev.2k", /* 0x0005 */ |
| - | "ATA-3 X3T10 2008D rev.1", /* 0x0006 */ |
| - | "ATA-2 X3T10 948D rev.2k", /* 0x0007 */ |
| - | "ATA-3 X3T10 2008D rev.0", /* 0x0008 */ |
| - | "ATA-2 X3T10 948D rev.3", /* 0x0009 */ |
| - | "ATA-3 published, ANSI X3.298-199x", /* 0x000a */ |
| - | "ATA-3 X3T10 2008D rev.6", /* 0x000b */ |
| - | "ATA-3 X3T13 2008D rev.7 and 7a", /* 0x000c */ |
| - | "ATA/ATAPI-4 X3T13 1153D rev.6", /* 0x000d */ |
| - | "ATA/ATAPI-4 T13 1153D rev.13", /* 0x000e */ |
| - | "ATA/ATAPI-4 X3T13 1153D rev.7", /* 0x000f */ |
| - | "ATA/ATAPI-4 T13 1153D rev.18", /* 0x0010 */ |
| - | "ATA/ATAPI-4 T13 1153D rev.15", /* 0x0011 */ |
| - | "ATA/ATAPI-4 published, ANSI INCITS 317-1998", /* 0x0012 */ |
| - | "ATA/ATAPI-5 T13 1321D rev.3", /* 0x0013 */ |
| - | "ATA/ATAPI-4 T13 1153D rev.14", /* 0x0014 */ |
| - | "ATA/ATAPI-5 T13 1321D rev.1", /* 0x0015 */ |
| - | "ATA/ATAPI-5 published, ANSI INCITS 340-2000", /* 0x0016 */ |
| - | "ATA/ATAPI-4 T13 1153D rev.17", /* 0x0017 */ |
| - | "ATA/ATAPI-6 T13 1410D rev.0", /* 0x0018 */ |
| - | "ATA/ATAPI-6 T13 1410D rev.3a", /* 0x0019 */ |
| - | "ATA/ATAPI-7 T13 1532D rev.1", /* 0x001a */ |
| - | "ATA/ATAPI-6 T13 1410D rev.2", /* 0x001b */ |
| - | "ATA/ATAPI-6 T13 1410D rev.1", /* 0x001c */ |
| - | "ATA/ATAPI-7 published, ANSI INCITS 397-2005", /* 0x001d */ |
| - | "ATA/ATAPI-7 T13 1532D rev.0", /* 0x001e */ |
| - | "Reserved" /* 0x001f */ |
| - | "Reserved" /* 0x0020 */ |
| - | "ATA/ATAPI-7 T13 1532D rev.4a", /* 0x0021 */ |
| - | "ATA/ATAPI-6 published, ANSI INCITS 361-2002", /* 0x0022 */ |
| - | "Reserved" /* 0x0023-0xfffe */ |
| - | }; |
| - | #endif |
| - | static const char actual_ver[MINOR_MAX + 2] ALIGN1 = { |
| - | /* word 81 value: */ |
| - | 0, /* 0x0000 WARNING: actual_ver[] array */ |
| - | 1, /* 0x0001 WARNING: corresponds */ |
| - | 1, /* 0x0002 WARNING: *exactly* */ |
| - | 1, /* 0x0003 WARNING: to the ATA/ */ |
| - | 2, /* 0x0004 WARNING: ATAPI version */ |
| - | 2, /* 0x0005 WARNING: listed in */ |
| - | 3, /* 0x0006 WARNING: the */ |
| - | 2, /* 0x0007 WARNING: minor_str */ |
| - | 3, /* 0x0008 WARNING: array */ |
| - | 2, /* 0x0009 WARNING: above. */ |
| - | 3, /* 0x000a WARNING: */ |
| - | 3, /* 0x000b WARNING: If you change */ |
| - | 3, /* 0x000c WARNING: that one, */ |
| - | 4, /* 0x000d WARNING: change this one */ |
| - | 4, /* 0x000e WARNING: too!!! */ |
| - | 4, /* 0x000f */ |
| - | 4, /* 0x0010 */ |
| - | 4, /* 0x0011 */ |
| - | 4, /* 0x0012 */ |
| - | 5, /* 0x0013 */ |
| - | 4, /* 0x0014 */ |
| - | 5, /* 0x0015 */ |
| - | 5, /* 0x0016 */ |
| - | 4, /* 0x0017 */ |
| - | 6, /* 0x0018 */ |
| - | 6, /* 0x0019 */ |
| - | 7, /* 0x001a */ |
| - | 6, /* 0x001b */ |
| - | 6, /* 0x001c */ |
| - | 7, /* 0x001d */ |
| - | 7, /* 0x001e */ |
| - | 0, /* 0x001f */ |
| - | 0, /* 0x0020 */ |
| - | 7, /* 0x0021 */ |
| - | 6, /* 0x0022 */ |
| - | 0 /* 0x0023-0xfffe */ |
| - | }; |
| - | |
| /* words 82-84: cmds/feats supported */ | |
| #define CMDS_W82 0x77ff /* word 82: defined command locations*/ | |
| #define CMDS_W83 0x3fff /* word 83: defined command locations*/ | |
| @@ -326,62 +189,6 @@ static const char actual_ver[MINOR_MAX + 2] ALIGN1 = { | |
| #define SUPPORT_48_BIT 0x0400 | |
| #define NUM_CMD_FEAT_STR 48 | |
| - | #if ENABLE_FEATURE_HDPARM_GET_IDENTITY |
| - | static const char *const cmd_feat_str[] = { |
| - | "", /* word 82 bit 15: obsolete */ |
| - | "NOP cmd", /* word 82 bit 14 */ |
| - | "READ BUFFER cmd", /* word 82 bit 13 */ |
| - | "WRITE BUFFER cmd", /* word 82 bit 12 */ |
| - | "", /* word 82 bit 11: obsolete */ |
| - | "Host Protected Area feature set", /* word 82 bit 10 */ |
| - | "DEVICE RESET cmd", /* word 82 bit 9 */ |
| - | "SERVICE interrupt", /* word 82 bit 8 */ |
| - | "Release interrupt", /* word 82 bit 7 */ |
| - | "Look-ahead", /* word 82 bit 6 */ |
| - | "Write cache", /* word 82 bit 5 */ |
| - | "PACKET command feature set", /* word 82 bit 4 */ |
| - | "Power Management feature set", /* word 82 bit 3 */ |
| - | "Removable Media feature set", /* word 82 bit 2 */ |
| - | "Security Mode feature set", /* word 82 bit 1 */ |
| - | "SMART feature set", /* word 82 bit 0 */ |
| - | /* -------------- */ |
| - | "", /* word 83 bit 15: !valid bit */ |
| - | "", /* word 83 bit 14: valid bit */ |
| - | "FLUSH CACHE EXT cmd", /* word 83 bit 13 */ |
| - | "Mandatory FLUSH CACHE cmd ", /* word 83 bit 12 */ |
| - | "Device Configuration Overlay feature set ", |
| - | "48-bit Address feature set ", /* word 83 bit 10 */ |
| - | "", |
| - | "SET MAX security extension", /* word 83 bit 8 */ |
| - | "Address Offset Reserved Area Boot", /* word 83 bit 7 */ |
| - | "SET FEATURES subcommand required to spinup after power up", |
| - | "Power-Up In Standby feature set", /* word 83 bit 5 */ |
| - | "Removable Media Status Notification feature set", |
| - | "Adv. Power Management feature set", /* word 83 bit 3 */ |
| - | "CFA feature set", /* word 83 bit 2 */ |
| - | "READ/WRITE DMA QUEUED", /* word 83 bit 1 */ |
| - | "DOWNLOAD MICROCODE cmd", /* word 83 bit 0 */ |
| - | /* -------------- */ |
| - | "", /* word 84 bit 15: !valid bit */ |
| - | "", /* word 84 bit 14: valid bit */ |
| - | "", /* word 84 bit 13: reserved */ |
| - | "", /* word 84 bit 12: reserved */ |
| - | "", /* word 84 bit 11: reserved */ |
| - | "", /* word 84 bit 10: reserved */ |
| - | "", /* word 84 bit 9: reserved */ |
| - | "", /* word 84 bit 8: reserved */ |
| - | "", /* word 84 bit 7: reserved */ |
| - | "", /* word 84 bit 6: reserved */ |
| - | "General Purpose Logging feature set", /* word 84 bit 5 */ |
| - | "", /* word 84 bit 4: reserved */ |
| - | "Media Card Pass Through Command feature set ", |
| - | "Media serial number ", /* word 84 bit 2 */ |
| - | "SMART self-test ", /* word 84 bit 1 */ |
| - | "SMART error logging " /* word 84 bit 0 */ |
| - | }; |
| - | #endif |
| - | |
| - | |
| /* words 85-87: cmds/feats enabled */ | |
| /* use cmd_feat_str[] to display what commands and features have | |
| * been enabled with words 85-87 | |
| @@ -408,16 +215,6 @@ static const char *const cmd_feat_str[] = { | |
| #define SECU_ENABLED 0x0002 | |
| #define SECU_LEVEL 0x0010 | |
| #define NUM_SECU_STR 6 | |
| - | #if ENABLE_FEATURE_HDPARM_GET_IDENTITY |
| - | static const char *const secu_str[] = { |
| - | "supported", /* word 128, bit 0 */ |
| - | "enabled", /* word 128, bit 1 */ |
| - | "locked", /* word 128, bit 2 */ |
| - | "frozen", /* word 128, bit 3 */ |
| - | "expired: security count", /* word 128, bit 4 */ |
| - | "supported: enhanced erase" /* word 128, bit 5 */ |
| - | }; |
| - | #endif |
| /* word 160: CFA power mode */ | |
| #define VALID_W160 0x8000 /* 1=word valid */ | |
| @@ -694,8 +491,195 @@ static uint8_t mode_loop(uint16_t mode_sup, uint16_t mode_sel, int cc, uint8_t * | |
| return err_dma; | |
| } | |
| - | // Parse 512 byte disk identification block and print much crap. |
| + | static const char *nth_str(const char *strings, int n) |
| + | { |
| + | while (n) { |
| + | n--; |
| + | strings += strlen(strings) + 1; |
| + | } |
| + | return strings; |
| + | } |
| + | static const char pkt_str[] ALIGN1 = |
| + | "Direct-access device" "\0" /* word 0, bits 12-8 = 00 */ |
| + | "Sequential-access device" "\0" /* word 0, bits 12-8 = 01 */ |
| + | "Printer" "\0" /* word 0, bits 12-8 = 02 */ |
| + | "Processor" "\0" /* word 0, bits 12-8 = 03 */ |
| + | "Write-once device" "\0" /* word 0, bits 12-8 = 04 */ |
| + | "CD-ROM" "\0" /* word 0, bits 12-8 = 05 */ |
| + | "Scanner" "\0" /* word 0, bits 12-8 = 06 */ |
| + | "Optical memory" "\0" /* word 0, bits 12-8 = 07 */ |
| + | "Medium changer" "\0" /* word 0, bits 12-8 = 08 */ |
| + | "Communications device" "\0" /* word 0, bits 12-8 = 09 */ |
| + | "ACS-IT8 device" "\0" /* word 0, bits 12-8 = 0a */ |
| + | "ACS-IT8 device" "\0" /* word 0, bits 12-8 = 0b */ |
| + | "Array controller" "\0" /* word 0, bits 12-8 = 0c */ |
| + | "Enclosure services" "\0" /* word 0, bits 12-8 = 0d */ |
| + | "Reduced block command device" "\0" /* word 0, bits 12-8 = 0e */ |
| + | "Optical card reader/writer" "\0" /* word 0, bits 12-8 = 0f */ |
| + | ; |
| + | |
| + | static const char ata1_cfg_str[] ALIGN1 = /* word 0 in ATA-1 mode */ |
| + | "reserved" "\0" /* bit 0 */ |
| + | "hard sectored" "\0" /* bit 1 */ |
| + | "soft sectored" "\0" /* bit 2 */ |
| + | "not MFM encoded " "\0" /* bit 3 */ |
| + | "head switch time > 15us" "\0" /* bit 4 */ |
| + | "spindle motor control option" "\0" /* bit 5 */ |
| + | "fixed drive" "\0" /* bit 6 */ |
| + | "removable drive" "\0" /* bit 7 */ |
| + | "disk xfer rate <= 5Mbs" "\0" /* bit 8 */ |
| + | "disk xfer rate > 5Mbs, <= 10Mbs" "\0" /* bit 9 */ |
| + | "disk xfer rate > 5Mbs" "\0" /* bit 10 */ |
| + | "rotational speed tol." "\0" /* bit 11 */ |
| + | "data strobe offset option" "\0" /* bit 12 */ |
| + | "track offset option" "\0" /* bit 13 */ |
| + | "format speed tolerance gap reqd" "\0" /* bit 14 */ |
| + | "ATAPI" /* bit 14 */ |
| + | ; |
| + | |
| + | static const char minor_str[] ALIGN1 = |
| + | /* word 81 value: */ |
| + | "Unspecified" "\0" /* 0x0000 */ |
| + | "ATA-1 X3T9.2 781D prior to rev.4" "\0" /* 0x0001 */ |
| + | "ATA-1 published, ANSI X3.221-1994" "\0" /* 0x0002 */ |
| + | "ATA-1 X3T9.2 781D rev.4" "\0" /* 0x0003 */ |
| + | "ATA-2 published, ANSI X3.279-1996" "\0" /* 0x0004 */ |
| + | "ATA-2 X3T10 948D prior to rev.2k" "\0" /* 0x0005 */ |
| + | "ATA-3 X3T10 2008D rev.1" "\0" /* 0x0006 */ |
| + | "ATA-2 X3T10 948D rev.2k" "\0" /* 0x0007 */ |
| + | "ATA-3 X3T10 2008D rev.0" "\0" /* 0x0008 */ |
| + | "ATA-2 X3T10 948D rev.3" "\0" /* 0x0009 */ |
| + | "ATA-3 published, ANSI X3.298-199x" "\0" /* 0x000a */ |
| + | "ATA-3 X3T10 2008D rev.6" "\0" /* 0x000b */ |
| + | "ATA-3 X3T13 2008D rev.7 and 7a" "\0" /* 0x000c */ |
| + | "ATA/ATAPI-4 X3T13 1153D rev.6" "\0" /* 0x000d */ |
| + | "ATA/ATAPI-4 T13 1153D rev.13" "\0" /* 0x000e */ |
| + | "ATA/ATAPI-4 X3T13 1153D rev.7" "\0" /* 0x000f */ |
| + | "ATA/ATAPI-4 T13 1153D rev.18" "\0" /* 0x0010 */ |
| + | "ATA/ATAPI-4 T13 1153D rev.15" "\0" /* 0x0011 */ |
| + | "ATA/ATAPI-4 published, ANSI INCITS 317-1998" "\0" /* 0x0012 */ |
| + | "ATA/ATAPI-5 T13 1321D rev.3" "\0" /* 0x0013 */ |
| + | "ATA/ATAPI-4 T13 1153D rev.14" "\0" /* 0x0014 */ |
| + | "ATA/ATAPI-5 T13 1321D rev.1" "\0" /* 0x0015 */ |
| + | "ATA/ATAPI-5 published, ANSI INCITS 340-2000" "\0" /* 0x0016 */ |
| + | "ATA/ATAPI-4 T13 1153D rev.17" "\0" /* 0x0017 */ |
| + | "ATA/ATAPI-6 T13 1410D rev.0" "\0" /* 0x0018 */ |
| + | "ATA/ATAPI-6 T13 1410D rev.3a" "\0" /* 0x0019 */ |
| + | "ATA/ATAPI-7 T13 1532D rev.1" "\0" /* 0x001a */ |
| + | "ATA/ATAPI-6 T13 1410D rev.2" "\0" /* 0x001b */ |
| + | "ATA/ATAPI-6 T13 1410D rev.1" "\0" /* 0x001c */ |
| + | "ATA/ATAPI-7 published, ANSI INCITS 397-2005" "\0" /* 0x001d */ |
| + | "ATA/ATAPI-7 T13 1532D rev.0" "\0" /* 0x001e */ |
| + | "reserved" "\0" /* 0x001f */ |
| + | "reserved" "\0" /* 0x0020 */ |
| + | "ATA/ATAPI-7 T13 1532D rev.4a" "\0" /* 0x0021 */ |
| + | "ATA/ATAPI-6 published, ANSI INCITS 361-2002" "\0" /* 0x0022 */ |
| + | "reserved" /* 0x0023-0xfffe */ |
| + | ; |
| + | static const char actual_ver[MINOR_MAX + 2] ALIGN1 = { |
| + | /* word 81 value: */ |
| + | 0, /* 0x0000 WARNING: actual_ver[] array */ |
| + | 1, /* 0x0001 WARNING: corresponds */ |
| + | 1, /* 0x0002 WARNING: *exactly* */ |
| + | 1, /* 0x0003 WARNING: to the ATA/ */ |
| + | 2, /* 0x0004 WARNING: ATAPI version */ |
| + | 2, /* 0x0005 WARNING: listed in */ |
| + | 3, /* 0x0006 WARNING: the */ |
| + | 2, /* 0x0007 WARNING: minor_str */ |
| + | 3, /* 0x0008 WARNING: array */ |
| + | 2, /* 0x0009 WARNING: above. */ |
| + | 3, /* 0x000a WARNING: */ |
| + | 3, /* 0x000b WARNING: If you change */ |
| + | 3, /* 0x000c WARNING: that one, */ |
| + | 4, /* 0x000d WARNING: change this one */ |
| + | 4, /* 0x000e WARNING: too!!! */ |
| + | 4, /* 0x000f */ |
| + | 4, /* 0x0010 */ |
| + | 4, /* 0x0011 */ |
| + | 4, /* 0x0012 */ |
| + | 5, /* 0x0013 */ |
| + | 4, /* 0x0014 */ |
| + | 5, /* 0x0015 */ |
| + | 5, /* 0x0016 */ |
| + | 4, /* 0x0017 */ |
| + | 6, /* 0x0018 */ |
| + | 6, /* 0x0019 */ |
| + | 7, /* 0x001a */ |
| + | 6, /* 0x001b */ |
| + | 6, /* 0x001c */ |
| + | 7, /* 0x001d */ |
| + | 7, /* 0x001e */ |
| + | 0, /* 0x001f */ |
| + | 0, /* 0x0020 */ |
| + | 7, /* 0x0021 */ |
| + | 6, /* 0x0022 */ |
| + | 0 /* 0x0023-0xfffe */ |
| + | }; |
| + | |
| + | static const char cmd_feat_str[] ALIGN1 = |
| + | "" "\0" /* word 82 bit 15: obsolete */ |
| + | "NOP cmd" "\0" /* word 82 bit 14 */ |
| + | "READ BUFFER cmd" "\0" /* word 82 bit 13 */ |
| + | "WRITE BUFFER cmd" "\0" /* word 82 bit 12 */ |
| + | "" "\0" /* word 82 bit 11: obsolete */ |
| + | "Host Protected Area feature set" "\0" /* word 82 bit 10 */ |
| + | "DEVICE RESET cmd" "\0" /* word 82 bit 9 */ |
| + | "SERVICE interrupt" "\0" /* word 82 bit 8 */ |
| + | "Release interrupt" "\0" /* word 82 bit 7 */ |
| + | "Look-ahead" "\0" /* word 82 bit 6 */ |
| + | "Write cache" "\0" /* word 82 bit 5 */ |
| + | "PACKET command feature set" "\0" /* word 82 bit 4 */ |
| + | "Power Management feature set" "\0" /* word 82 bit 3 */ |
| + | "Removable Media feature set" "\0" /* word 82 bit 2 */ |
| + | "Security Mode feature set" "\0" /* word 82 bit 1 */ |
| + | "SMART feature set" "\0" /* word 82 bit 0 */ |
| + | /* -------------- */ |
| + | "" "\0" /* word 83 bit 15: !valid bit */ |
| + | "" "\0" /* word 83 bit 14: valid bit */ |
| + | "FLUSH CACHE EXT cmd" "\0" /* word 83 bit 13 */ |
| + | "Mandatory FLUSH CACHE cmd " "\0" /* word 83 bit 12 */ |
| + | "Device Configuration Overlay feature set " "\0" |
| + | "48-bit Address feature set " "\0" /* word 83 bit 10 */ |
| + | "" "\0" |
| + | "SET MAX security extension" "\0" /* word 83 bit 8 */ |
| + | "Address Offset Reserved Area Boot" "\0" /* word 83 bit 7 */ |
| + | "SET FEATURES subcommand required to spinup after power up" "\0" |
| + | "Power-Up In Standby feature set" "\0" /* word 83 bit 5 */ |
| + | "Removable Media Status Notification feature set" "\0" |
| + | "Adv. Power Management feature set" "\0" /* word 83 bit 3 */ |
| + | "CFA feature set" "\0" /* word 83 bit 2 */ |
| + | "READ/WRITE DMA QUEUED" "\0" /* word 83 bit 1 */ |
| + | "DOWNLOAD MICROCODE cmd" "\0" /* word 83 bit 0 */ |
| + | /* -------------- */ |
| + | "" "\0" /* word 84 bit 15: !valid bit */ |
| + | "" "\0" /* word 84 bit 14: valid bit */ |
| + | "" "\0" /* word 84 bit 13: reserved */ |
| + | "" "\0" /* word 84 bit 12: reserved */ |
| + | "" "\0" /* word 84 bit 11: reserved */ |
| + | "" "\0" /* word 84 bit 10: reserved */ |
| + | "" "\0" /* word 84 bit 9: reserved */ |
| + | "" "\0" /* word 84 bit 8: reserved */ |
| + | "" "\0" /* word 84 bit 7: reserved */ |
| + | "" "\0" /* word 84 bit 6: reserved */ |
| + | "General Purpose Logging feature set" "\0" /* word 84 bit 5 */ |
| + | "" "\0" /* word 84 bit 4: reserved */ |
| + | "Media Card Pass Through Command feature set " "\0" |
| + | "Media serial number " "\0" /* word 84 bit 2 */ |
| + | "SMART self-test " "\0" /* word 84 bit 1 */ |
| + | "SMART error logging " /* word 84 bit 0 */ |
| + | ; |
| + | |
| + | static const char secu_str[] ALIGN1 = |
| + | "supported" "\0" /* word 128, bit 0 */ |
| + | "enabled" "\0" /* word 128, bit 1 */ |
| + | "locked" "\0" /* word 128, bit 2 */ |
| + | "frozen" "\0" /* word 128, bit 3 */ |
| + | "expired: security count" "\0" /* word 128, bit 4 */ |
| + | "supported: enhanced erase" /* word 128, bit 5 */ |
| + | ; |
| + | |
| + | // Parse 512 byte disk identification block and print much crap. |
| static void identify(uint16_t *val) ATTRIBUTE_NORETURN; | |
| static void identify(uint16_t *val) | |
| { | |
| @@ -726,10 +710,10 @@ static void identify(uint16_t *val) | |
| } else if (!(val[GEN_CONFIG] & NOT_ATAPI)) { | |
| dev = ATAPI_DEV; | |
| eqpt = (val[GEN_CONFIG] & EQPT_TYPE) >> SHIFT_EQPT; | |
| - | printf("ATAPI %s, with ", pkt_str[eqpt]); |
| + | printf("ATAPI %s, with ", eqpt <= 0xf ? nth_str(pkt_str, eqpt) : "unknown"); |
| like_std = 3; | |
| } else | |
| - | /*"Unknown device type:\n\tbits 15&14 of general configuration word 0 both set to 1.\n"*/ |
| + | /* "Unknown device type:\n\tbits 15&14 of general configuration word 0 both set to 1.\n" */ |
| bb_error_msg_and_die("unknown device type"); | |
| printf("%sremovable media\n", !(val[GEN_CONFIG] & MEDIA_REMOVABLE) ? "non-" : ""); | |
| @@ -764,7 +748,7 @@ static void identify(uint16_t *val) | |
| if (val[MINOR] && (val[MINOR] <= MINOR_MAX)) { | |
| if (like_std < 3) like_std = 3; | |
| std = actual_ver[val[MINOR]]; | |
| - | if (std) printf("\n\tUsed: %s ", minor_str[val[MINOR]]); |
| + | if (std) printf("\n\tUsed: %s ", nth_str(minor_str, val[MINOR])); |
| } | |
| /* looks like when they up-issue the std, they obsolete one; | |
| @@ -863,7 +847,7 @@ static void identify(uint16_t *val) | |
| jj = val[GEN_CONFIG] >> 1; | |
| for (ii = 1; ii < 15; ii++) { | |
| if (jj & 0x0001) | |
| - | printf("\t%s\n", ata1_cfg_str[ii]); |
| + | printf("\t%s\n", nth_str(ata1_cfg_str, ii)); |
| jj >>=1; | |
| } | |
| } | |
| @@ -875,7 +859,7 @@ static void identify(uint16_t *val) | |
| else if ((val[GEN_CONFIG] & DRQ_RESPONSE_TIME) == DRQ_50US_VAL) | |
| strng ="50us"; | |
| else | |
| - | strng = "Unknown"; |
| + | strng = "unknown"; |
| printf("\tDRQ response: %s\n\tPacket size: ", strng); /* Data Request (DRQ) */ | |
| if ((val[GEN_CONFIG] & PKT_SIZE_SUPPORTED) == PKT_SIZE_12_VAL) | |
| @@ -883,7 +867,7 @@ static void identify(uint16_t *val) | |
| else if ((val[GEN_CONFIG] & PKT_SIZE_SUPPORTED) == PKT_SIZE_16_VAL) | |
| strng = "16 bytes"; | |
| else | |
| - | strng = "Unknown"; |
| + | strng = "unknown"; |
| puts(strng); | |
| } else { | |
| /* addressing...CHS? See section 6.2 of ATA specs 4 or 5 */ | |
| @@ -1070,7 +1054,7 @@ static void identify(uint16_t *val) | |
| printf("pio%d ", ii); | |
| bb_putchar('\n'); | |
| } else | |
| - | printf("unknown\n"); |
| + | puts("unknown"); |
| if (val[WHATS_VALID] & OK_W64_70) { | |
| if (val[PIO_NO_FLOW] || val[PIO_FLOW]) { | |
| @@ -1086,8 +1070,9 @@ static void identify(uint16_t *val) | |
| jj = val[CMDS_SUPP_0]; | |
| kk = val[CMDS_EN_0]; | |
| for (ii = 0; ii < NUM_CMD_FEAT_STR; ii++) { | |
| - | if ((jj & 0x8000) && (*cmd_feat_str[ii] != '\0')) { |
| - | printf("\t%s\t%s\n", (kk & 0x8000) ? " *" : "", cmd_feat_str[ii]); |
| + | const char *feat_str = nth_str(cmd_feat_str, ii); |
| + | if ((jj & 0x8000) && (*feat_str != '\0')) { |
| + | printf("\t%s\t%s\n", (kk & 0x8000) ? " *" : "", feat_str); |
| } | |
| jj <<= 1; | |
| kk <<= 1; | |
| @@ -1103,7 +1088,7 @@ static void identify(uint16_t *val) | |
| } | |
| /* Removable Media Status Notification feature set */ | |
| if ((val[RM_STAT] & RM_STAT_BITS) == RM_STAT_SUP) | |
| - | printf("\t%s supported\n", cmd_feat_str[27]); |
| + | printf("\t%s supported\n", nth_str(cmd_feat_str, 27)); |
| /* security */ | |
| if ((eqpt != CDROM) && (like_std > 3) | |
| @@ -1115,7 +1100,7 @@ static void identify(uint16_t *val) | |
| jj = val[SECU_STATUS]; | |
| if (jj) { | |
| for (ii = 0; ii < NUM_SECU_STR; ii++) { | |
| - | printf("\t%s\t%s\n", (!(jj & 0x0001)) ? "not" : "", secu_str[ii]); |
| + | printf("\t%s\t%s\n", (!(jj & 0x0001)) ? "not" : "", nth_str(secu_str, ii)); |
| jj >>=1; | |
| } | |
| if (val[SECU_STATUS] & SECU_ENABLED) { | |
| @@ -1177,16 +1162,16 @@ static void identify(uint16_t *val) | |
| // Too bad, really. | |
| #if ENABLE_FEATURE_HDPARM_GET_IDENTITY | |
| - | static const char *const cfg_str[] = { |
| - | "", "HardSect", "SoftSect", "NotMFM", |
| - | "HdSw>15uSec", "SpinMotCtl", "Fixed", "Removeable", |
| - | "DTR<=5Mbs", "DTR>5Mbs", "DTR>10Mbs", "RotSpdTol>.5%", |
| - | "dStbOff", "TrkOff", "FmtGapReq", "nonMagnetic" |
| - | }; |
| + | static const char cfg_str[] ALIGN1 = |
| + | """\0" "HardSect""\0" "SoftSect""\0" "NotMFM""\0" |
| + | "HdSw>15uSec""\0" "SpinMotCtl""\0" "Fixed""\0" "Removeable""\0" |
| + | "DTR<=5Mbs""\0" "DTR>5Mbs""\0" "DTR>10Mbs""\0" "RotSpdTol>.5%""\0" |
| + | "dStbOff""\0" "TrkOff""\0" "FmtGapReq""\0" "nonMagnetic" |
| + | ; |
| - | static const char *const BuffType[] = { |
| - | "Unknown", "1Sect", "DualPort", "DualPortCache" |
| - | }; |
| + | static const char BuffType[] ALIGN1 = |
| + | "unknown""\0" "1Sect""\0" "DualPort""\0" "DualPortCache" |
| + | ; |
| static void dump_identity(const struct hd_driveid *id) | |
| { | |
| @@ -1197,13 +1182,13 @@ static void dump_identity(const struct hd_driveid *id) | |
| id->model, id->fw_rev, id->serial_no); | |
| for (i = 0; i <= 15; i++) { | |
| if (id->config & (1<<i)) | |
| - | printf(" %s", cfg_str[i]); |
| + | printf(" %s", nth_str(cfg_str, i)); |
| } | |
| printf(" }\n RawCHS=%u/%u/%u, TrkSize=%u, SectSize=%u, ECCbytes=%u\n" | |
| " BuffType=(%u) %s, BuffSize=%ukB, MaxMultSect=%u", | |
| id->cyls, id->heads, id->sectors, id->track_bytes, | |
| id->sector_bytes, id->ecc_bytes, | |
| - | id->buf_type, BuffType[(id->buf_type > 3) ? 0 : id->buf_type], |
| + | id->buf_type, nth_str(BuffType, (id->buf_type > 3) ? 0 : id->buf_type), |
| id->buf_size/2, id->max_multsect); | |
| if (id->max_multsect) { | |
| printf(", MultSect="); | |
| @@ -1309,7 +1294,7 @@ static void dump_identity(const struct hd_driveid *id) | |
| if ((id->minor_rev_num && id->minor_rev_num <= 31) | |
| || (id->major_rev_num && id->minor_rev_num <= 31) | |
| ) { | |
| - | printf("\n Drive conforms to: %s: ", (id->minor_rev_num <= 31) ? minor_str[id->minor_rev_num] : "Unknown"); |
| + | printf("\n Drive conforms to: %s: ", (id->minor_rev_num <= 31) ? nth_str(minor_str, id->minor_rev_num) : "unknown"); |
| if (id->major_rev_num != 0x0000 && /* NOVAL_0 */ | |
| id->major_rev_num != 0xFFFF) { /* NOVAL_1 */ | |
| for (i = 0; i <= 15; i++) { | |
| @@ -1479,7 +1464,7 @@ static void interpret_standby(unsigned standby) | |
| else if (standby == 253) | |
| printf("vendor-specific"); | |
| else if (standby == 254) | |
| - | printf("Reserved"); |
| + | printf("reserved"); |
| else if (standby == 255) | |
| printf("21 minutes + 15 seconds"); | |
| else if (standby <= 240) { | |
| @@ -1539,7 +1524,7 @@ static void interpret_xfermode(unsigned xfermode) | |
| else if (xfermode >= 64 && xfermode <= 71) | |
| printf("UltraDMA mode%u", xfermode - 64); | |
| else | |
| - | printf("Unknown"); |
| + | printf("unknown"); |
| printf(")\n"); | |
| } | |
| #endif /* HDIO_DRIVE_CMD */ | |