d8330ca4a

Denys Vlasenko

2016-09-20

SUCCESS Duration: 221s

Subject

examples/var_service/supplicant_if: new service example

No binary (build failed)

Architecture: x86_64-linux-gnu Compiler: gcc (Ubuntu 11.4.0-1ubuntu1~22.04.3) 11.4.0

—

(log yok)

examples/var_service/supplicant_if/README+5 -0

@@ -0,0 +1,5 @@
+	The real README file is one directory up.
+
+	This directory's run script can have useful comments.
+	If it doesn't but you feel it should, please send a patch
+	to busybox's mailing list.

examples/var_service/supplicant_if/log/run+21 -0

@@ -0,0 +1,21 @@
+	#!/bin/sh
+
+	user=logger
+
+	logdir="/var/log/service/`(cd ..;basename $PWD)`"
+	mkdir -p "$logdir" 2>/dev/null
+	chown -R "$user": "$logdir"
+	chmod -R go-rwxst,u+rwX "$logdir"
+	rm -rf logdir
+	ln -s "$logdir" logdir
+
+	# make this dir accessible to logger
+	chmod a+rX .
+
+	exec >/dev/null
+	exec 2>&1
+	exec \
+	env - PATH="$PATH" \
+	softlimit \
+	setuidgid "$user" \
+	svlogd -tt "$logdir"

examples/var_service/supplicant_if/p_log+4 -0

examples/var_service/supplicant_if/run+21 -0

@@ -0,0 +1,21 @@
+	#!/bin/sh
+
+	exec 2>&1
+	exec </dev/null
+
+	pwd="$PWD"
+
+	if="${PWD##*/dhcp_}"
+
+	echo "* Upping iface $if"
+	ip link set dev "$if" up
+
+	##echo "* Powersave disable on $if"
+	##iw dev "$if" set power_save off
+
+	echo "* Starting wpa_supplicant"
+	exec \
+	env - PATH="$PATH" \
+	softlimit \
+	setuidgid root \
+	wpa_supplicant -i "$if" -c "$pwd/wpa_supplicant.conf" -d

examples/var_service/supplicant_if/w_log+4 -0

@@ -0,0 +1,4 @@
+	#!/bin/sh
+
+	cd log/logdir \|\| exit 1
+	watch -n2 'w=`ttysize w`; h=`ttysize h`; tail -$((h-3)) current 2>&1 \| cut -b1-$((w-2))'

examples/var_service/supplicant_if/wpa_supplicant.conf+28 -0

@@ -0,0 +1,28 @@
+	# allow frontend (e.g., wpa_cli) to be used by all users in 'wheel' group
+	ctrl_interface=DIR=/var/run/wpa_supplicant
+	#GROUP=wheel
+
+	# Typical minimal wifi setup:
+	network={
+	ssid="--your-ESSID--"
+	key_mgmt=WPA-PSK
+	psk="--your-password--"
+	}
+
+	# Other fields:
+	# scan_ssid=1
+	# key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
+	# pairwise=CCMP TKIP
+	# group=CCMP TKIP WEP104 WEP40
+	# psk="very secret passphrase"
+	# eap=TTLS PEAP TLS
+	# identity="[email protected]"
+	# ca_cert="/etc/cert/ca.pem"
+	# client_cert="/etc/cert/user.pem"
+	# private_key="/etc/cert/user.prv"
+	# private_key_passwd="password"
+	# phase1="peaplabel=0"
+	# ca_cert2="/etc/cert/ca2.pem"
+	# client_cert2="/etc/cer/user.pem"
+	# private_key2="/etc/cer/user.prv"
+	# private_key2_passwd="password"