← Commit list

e3b1a1fd2

Denys Vlasenko
Denys Vlasenko
2011-02-26
FAILED Duration: 213s

Subject

Replace "depends on PLATFORM_LINUX" with "select PLATFORM_LINUX"

Binary

No binary (build failed)

Architecture & Compiler Flags

Architecture: x86_64-linux-gnu Compiler: gcc (Ubuntu 11.4.0-1ubuntu1~22.04.3) 11.4.0

—

Build Log

(log yok)

Commit Diff GitHub →

Config.in +1 -1console-tools/Config.src +13 -13coreutils/Config.src +1 -1coreutils/date.c +2 -1e2fsprogs/Config.src +1 -1libbb/Config.src +1 -1miscutils/Config.src +14 -13miscutils/conspy.c +1 -1miscutils/nandwrite.c +2 -2miscutils/ubi_attach_detach.c +5 -5modutils/Config.src +19 -1networking/Config.src +19 -18networking/ping.c +1 -1networking/udhcp/Config.src +2 -2procps/Config.src +4 -3sysklogd/Config.src +2 -1util-linux/Config.src +27 -27
Config.in+1 -1
@@ -385,7 +385,7 @@ config FEATURE_SUID_CONFIG_QUIET
config SELINUX
bool "Support NSA Security Enhanced Linux"
default n
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Enable support for SELinux in applets ls, ps, and id. Also provide
the option of compiling in SELinux applets.
console-tools/Config.src+13 -13
@@ -10,7 +10,7 @@ INSERT
config CHVT
bool "chvt"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
This program is used to change to another terminal.
Example: chvt 4 (change to terminal /dev/tty4)
@@ -18,7 +18,7 @@ config CHVT
config FGCONSOLE
bool "fgconsole"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
This program prints active (foreground) console number.
@@ -31,14 +31,14 @@ config CLEAR
config DEALLOCVT
bool "deallocvt"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
This program deallocates unused virtual consoles.
config DUMPKMAP
bool "dumpkmap"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
This program dumps the kernel's keyboard translation table to
stdout, in binary format. You can then use loadkmap to load it.
@@ -46,21 +46,21 @@ config DUMPKMAP
config KBD_MODE
bool "kbd_mode"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
This program reports and sets keyboard mode.
config LOADFONT
bool "loadfont"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
This program loads a console font from standard input.
config LOADKMAP
bool "loadkmap"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
This program loads a keyboard translation table from
standard input.
@@ -68,7 +68,7 @@ config LOADKMAP
config OPENVT
bool "openvt"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
This program is used to start a command on an unused
virtual terminal.
@@ -100,7 +100,7 @@ config FEATURE_RESIZE_PRINT
config SETCONSOLE
bool "setconsole"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
This program redirects the system console to another device,
like the current tty while logged in via telnet.
@@ -115,7 +115,7 @@ config FEATURE_SETCONSOLE_LONG_OPTIONS
config SETFONT
bool "setfont"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Allows to load console screen map. Useful for i18n.
@@ -137,7 +137,7 @@ config DEFAULT_SETFONT_DIR
config SETKEYCODES
bool "setkeycodes"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
This program loads entries into the kernel's scancode-to-keycode
map, allowing unusual keyboards to generate usable keycodes.
@@ -145,14 +145,14 @@ config SETKEYCODES
config SETLOGCONS
bool "setlogcons"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
This program redirects the output console of kernel messages.
config SHOWKEY
bool "showkey"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Shows keys pressed.
coreutils/Config.src+1 -1
@@ -591,7 +591,7 @@ config FEATURE_SPLIT_FANCY
config STAT
bool "stat"
default y
- depends on PLATFORM_LINUX # statfs()
+ select PLATFORM_LINUX # statfs()
help
display file or filesystem status.
coreutils/date.c+2 -1
@@ -42,7 +42,8 @@
//config:config FEATURE_DATE_NANO
//config: bool "Support %[num]N nanosecond format specifier"
//config: default n
-//config: depends on DATE && PLATFORM_LINUX # syscall(__NR_clock_gettime)
+//config: depends on DATE # syscall(__NR_clock_gettime)
+//config: select PLATFORM_LINUX
//config: help
//config: Support %[num]N format specifier. Adds ~250 bytes of code.
//config:
e2fsprogs/Config.src+1 -1
@@ -33,7 +33,7 @@ config FSCK
config LSATTR
bool "lsattr"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
lsattr lists the file attributes on a second extended file system.
libbb/Config.src+1 -1
@@ -183,7 +183,7 @@ config FEATURE_SKIP_ROOTFS
config MONOTONIC_SYSCALL
bool "Use clock_gettime(CLOCK_MONOTONIC) syscall"
default n
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring
time intervals (time, ping, traceroute etc need this).
miscutils/Config.src+14 -13
@@ -10,7 +10,7 @@ INSERT
config ADJTIMEX
bool "adjtimex"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Adjtimex reads and optionally sets adjustment parameters for
the Linux clock adjustment algorithm.
@@ -39,7 +39,7 @@ config FEATURE_COMPRESS_BBCONFIG
config BEEP
bool "beep"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
The beep applets beeps in a given freq/Hz.
@@ -194,7 +194,7 @@ config FEATURE_DC_LIBM
config DEVFSD
bool "devfsd (obsolete)"
default n
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
select FEATURE_SYSLOG
help
This is deprecated and should NOT be used anymore.
@@ -238,7 +238,7 @@ config DEVFSD_VERBOSE
config FEATURE_DEVFS
bool "Use devfs names for all devices (obsolete)"
default n
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
This is obsolete and should NOT be used anymore.
Use linux >= 2.6 (optionally with hotplug) and mdev instead!
@@ -258,7 +258,7 @@ config DEVMEM
config EJECT
bool "eject"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Used to eject cdroms. (defaults to /dev/cdrom)
@@ -273,7 +273,7 @@ config FEATURE_EJECT_SCSI
config FBSPLASH
bool "fbsplash"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Shows splash image and progress bar on framebuffer device.
Can be used during boot phase of an embedded device. ~2kb.
@@ -323,7 +323,7 @@ config FLASH_ERASEALL
config IONICE
bool "ionice"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Set/set program io scheduling class and priority
Requires kernel >= 2.6.13
@@ -429,7 +429,7 @@ config FEATURE_LESS_LINENUMS
config HDPARM
bool "hdparm"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Get/Set hard drive parameters. Primarily intended for ATA
drives. Adds about 13k (or around 30k if you enable the
@@ -546,7 +546,7 @@ config MT
config RAIDAUTORUN
bool "raidautorun"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
raidautorun tells the kernel md driver to
search and start RAID arrays.
@@ -554,7 +554,8 @@ config RAIDAUTORUN
config READAHEAD
bool "readahead"
default y
- depends on LFS && PLATFORM_LINUX
+ depends on LFS
+ select PLATFORM_LINUX
help
Preload the files listed on the command line into RAM cache so that
subsequent reads on these files will not block on disk I/O.
@@ -571,7 +572,7 @@ config READAHEAD
config RFKILL
bool "rfkill"
default n # doesn't build on Ubuntu 9.04
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Enable/disable wireless devices.
@@ -593,7 +594,7 @@ config RUNLEVEL
config RX
bool "rx"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Receive files using the Xmodem protocol.
@@ -666,7 +667,7 @@ config WALL
config WATCHDOG
bool "watchdog"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
The watchdog utility is used with hardware or software watchdog
device drivers. It opens the specified watchdog device special file
miscutils/conspy.c+1 -1
@@ -17,7 +17,7 @@
//config:config CONSPY
//config: bool "conspy"
//config: default n
-//config: depends on PLATFORM_LINUX
+//config: select PLATFORM_LINUX
//config: help
//config: A text-mode VNC like program for Linux virtual terminals.
//config: example: conspy NUM shared access to console num
miscutils/nandwrite.c+2 -2
@@ -17,14 +17,14 @@
//config:config NANDWRITE
//config: bool "nandwrite"
//config: default n
-//config: depends on PLATFORM_LINUX
+//config: select PLATFORM_LINUX
//config: help
//config: Write to the specified MTD device, with bad blocks awareness
//config:
//config:config NANDDUMP
//config: bool "nanddump"
//config: default n
-//config: depends on PLATFORM_LINUX
+//config: select PLATFORM_LINUX
//config: help
//config: Dump the content of raw NAND chip
miscutils/ubi_attach_detach.c+5 -5
@@ -6,35 +6,35 @@
//config:config UBIATTACH
//config: bool "ubiattach"
//config: default y
-//config: depends on PLATFORM_LINUX
+//config: select PLATFORM_LINUX
//config: help
//config: Attach MTD device to an UBI device.
//config:
//config:config UBIDETACH
//config: bool "ubidetach"
//config: default y
-//config: depends on PLATFORM_LINUX
+//config: select PLATFORM_LINUX
//config: help
//config: Detach MTD device from an UBI device.
//config:
//config:config UBIMKVOL
//config: bool "ubimkvol"
//config: default y
-//config: depends on PLATFORM_LINUX
+//config: select PLATFORM_LINUX
//config: help
//config: Create a UBI volume.
//config:
//config:config UBIRMVOL
//config: bool "ubirmvol"
//config: default y
-//config: depends on PLATFORM_LINUX
+//config: select PLATFORM_LINUX
//config: help
//config: Delete a UBI volume.
//config:
//config:config UBIRSVOL
//config: bool "ubirsvol"
//config: default y
-//config: depends on PLATFORM_LINUX
+//config: select PLATFORM_LINUX
//config: help
//config: Resize a UBI volume.
modutils/Config.src+19 -1
@@ -4,13 +4,13 @@
#
menu "Linux Module Utilities"
-depends on PLATFORM_LINUX
INSERT
config MODPROBE_SMALL
bool "Simplified modutils"
default y
+ select PLATFORM_LINUX
help
Simplified modutils.
@@ -45,6 +45,7 @@ config FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE
bool "Accept module options on modprobe command line"
default y
depends on MODPROBE_SMALL
+ select PLATFORM_LINUX
help
Allow insmod and modprobe take module options from command line.
@@ -59,6 +60,7 @@ config INSMOD
bool "insmod"
default n
depends on !MODPROBE_SMALL
+ select PLATFORM_LINUX
help
insmod is used to load specified modules in the running kernel.
@@ -66,6 +68,7 @@ config RMMOD
bool "rmmod"
default n
depends on !MODPROBE_SMALL
+ select PLATFORM_LINUX
help
rmmod is used to unload specified modules from the kernel.
@@ -73,6 +76,7 @@ config LSMOD
bool "lsmod"
default n
depends on !MODPROBE_SMALL
+ select PLATFORM_LINUX
help
lsmod is used to display a list of loaded modules.
@@ -80,6 +84,7 @@ config FEATURE_LSMOD_PRETTY_2_6_OUTPUT
bool "Pretty output"
default n
depends on LSMOD
+ select PLATFORM_LINUX
help
This option makes output format of lsmod adjusted to
the format of module-init-tools for Linux kernel 2.6.
@@ -89,6 +94,7 @@ config MODPROBE
bool "modprobe"
default n
depends on !MODPROBE_SMALL
+ select PLATFORM_LINUX
help
Handle the loading of modules, and their dependencies on a high
level.
@@ -97,6 +103,7 @@ config FEATURE_MODPROBE_BLACKLIST
bool "Blacklist support"
default n
depends on MODPROBE
+ select PLATFORM_LINUX
help
Say 'y' here to enable support for the 'blacklist' command in
modprobe.conf. This prevents the alias resolver to resolve
@@ -108,6 +115,7 @@ config DEPMOD
bool "depmod"
default n
depends on !MODPROBE_SMALL
+ select PLATFORM_LINUX
help
depmod generates modules.dep (and potentially modules.alias
and modules.symbols) that contain dependency information
@@ -119,6 +127,7 @@ config FEATURE_2_4_MODULES
bool "Support version 2.2/2.4 Linux kernels"
default n
depends on INSMOD || RMMOD || LSMOD
+ select PLATFORM_LINUX
help
Support module loading for 2.2.x and 2.4.x Linux kernels.
This increases size considerably. Say N unless you plan
@@ -128,6 +137,7 @@ config FEATURE_INSMOD_TRY_MMAP
bool "Try to load module from a mmap'ed area"
default n
depends on INSMOD || MODPROBE_SMALL
+ select PLATFORM_LINUX
help
This option causes module loading code to try to mmap
module first. If it does not work (for example,
@@ -144,6 +154,7 @@ config FEATURE_INSMOD_VERSION_CHECKING
bool "Enable module version checking"
default n
depends on FEATURE_2_4_MODULES && (INSMOD || MODPROBE)
+ select PLATFORM_LINUX
help
Support checking of versions for modules. This is used to
ensure that the kernel and module are made for each other.
@@ -152,6 +163,7 @@ config FEATURE_INSMOD_KSYMOOPS_SYMBOLS
bool "Add module symbols to kernel symbol table"
default n
depends on FEATURE_2_4_MODULES && (INSMOD || MODPROBE)
+ select PLATFORM_LINUX
help
By adding module symbols to the kernel symbol table, Oops messages
occuring within kernel modules can be properly debugged. By enabling
@@ -163,6 +175,7 @@ config FEATURE_INSMOD_LOADINKMEM
bool "In kernel memory optimization (uClinux only)"
default n
depends on FEATURE_2_4_MODULES && (INSMOD || MODPROBE)
+ select PLATFORM_LINUX
help
This is a special uClinux only memory optimization that lets insmod
load the specified kernel module directly into kernel space, reducing
@@ -173,6 +186,7 @@ config FEATURE_INSMOD_LOAD_MAP
bool "Enable insmod load map (-m) option"
default n
depends on FEATURE_2_4_MODULES && INSMOD
+ select PLATFORM_LINUX
help
Enabling this, one would be able to get a load map
output on stdout. This makes kernel module debugging
@@ -184,6 +198,7 @@ config FEATURE_INSMOD_LOAD_MAP_FULL
bool "Symbols in load map"
default y
depends on FEATURE_INSMOD_LOAD_MAP && !MODPROBE_SMALL
+ select PLATFORM_LINUX
help
Without this option, -m will only output section
load map. With this option, -m will also output
@@ -193,6 +208,7 @@ config FEATURE_CHECK_TAINTED_MODULE
bool "Support tainted module checking with new kernels"
default y
depends on (LSMOD || FEATURE_2_4_MODULES) && !MODPROBE_SMALL
+ select PLATFORM_LINUX
help
Support checking for tainted modules. These are usually binary
only modules that will make the linux-kernel list ignore your
@@ -203,6 +219,7 @@ config FEATURE_MODUTILS_ALIAS
bool "Support for module.aliases file"
default y
depends on DEPMOD || MODPROBE
+ select PLATFORM_LINUX
help
Generate and parse modules.alias containing aliases for bus
identifiers:
@@ -219,6 +236,7 @@ config FEATURE_MODUTILS_SYMBOLS
bool "Support for module.symbols file"
default y
depends on DEPMOD || MODPROBE
+ select PLATFORM_LINUX
help
Generate and parse modules.symbols containing aliases for
symbol_request() kernel calls, such as:
networking/Config.src+19 -18
@@ -51,21 +51,21 @@ config VERBOSE_RESOLUTION_ERRORS
config ARP
bool "arp"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Manipulate the system ARP cache.
config ARPING
bool "arping"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Ping hosts by ARP packets.
config BRCTL
bool "brctl"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Manage ethernet bridges.
Supports addbr/delbr and addif/delif.
@@ -98,7 +98,7 @@ config DNSD
config ETHER_WAKE
bool "ether-wake"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Send a magic packet to wake up sleeping machines.
@@ -281,7 +281,7 @@ config FEATURE_HTTPD_GZIP
config IFCONFIG
bool "ifconfig"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Ifconfig is used to configure the kernel-resident network interfaces.
@@ -329,7 +329,7 @@ config FEATURE_IFCONFIG_BROADCAST_PLUS
config IFENSLAVE
bool "ifenslave"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Userspace application to bind several interfaces
to a logical interface (use with kernel bonding driver).
@@ -337,7 +337,7 @@ config IFENSLAVE
config IFPLUGD
bool "ifplugd"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Network interface plug detection daemon.
@@ -379,7 +379,8 @@ config FEATURE_IFUPDOWN_IP
config FEATURE_IFUPDOWN_IP_BUILTIN
bool "Use busybox ip applet"
default y
- depends on FEATURE_IFUPDOWN_IP && PLATFORM_LINUX
+ depends on FEATURE_IFUPDOWN_IP
+ select PLATFORM_LINUX
select IP
select FEATURE_IP_ADDRESS
select FEATURE_IP_LINK
@@ -498,7 +499,7 @@ config FEATURE_INETD_RPC
config IP
bool "ip"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
The "ip" applet is a TCP/IP interface configuration and routing
utility. You generally don't need "ip" to use busybox with
@@ -614,7 +615,7 @@ config FEATURE_IPCALC_LONG_OPTIONS
config NAMEIF
bool "nameif"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
select FEATURE_SYSLOG
help
nameif is used to rename network interface by its MAC address.
@@ -643,7 +644,7 @@ config FEATURE_NAMEIF_EXTENDED
config NETSTAT
bool "netstat"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
netstat prints information about the Linux networking subsystem.
@@ -672,7 +673,7 @@ config NSLOOKUP
config NTPD
bool "ntpd"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
The NTP client/server daemon.
@@ -693,14 +694,14 @@ config PSCAN
config ROUTE
bool "route"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Route displays or manipulates the kernel's IP routing tables.
config SLATTACH
bool "slattach"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
slattach is a small utility to attach network interfaces to serial
lines.
@@ -887,7 +888,7 @@ config TFTP_DEBUG
config TRACEROUTE
bool "traceroute"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Utility to trace the route of IP packets.
@@ -924,7 +925,7 @@ config FEATURE_TRACEROUTE_USE_ICMP
config TUNCTL
bool "tunctl"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
tunctl creates or deletes tun devices.
@@ -957,7 +958,7 @@ config UDPSVD
config VCONFIG
bool "vconfig"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Creates, removes, and configures VLAN interfaces
@@ -1004,7 +1005,7 @@ config FEATURE_WGET_TIMEOUT
config ZCIP
bool "zcip"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
select FEATURE_SYSLOG
help
ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
networking/ping.c+1 -1
@@ -32,7 +32,7 @@
//config:config PING
//config: bool "ping"
//config: default y
-//config: depends on PLATFORM_LINUX
+//config: select PLATFORM_LINUX
//config: help
//config: ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
//config: elicit an ICMP ECHO_RESPONSE from a host or gateway.
networking/udhcp/Config.src+2 -2
@@ -8,7 +8,7 @@ INSERT
config UDHCPD
bool "udhcp server (udhcpd)"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
udhcpd is a DHCP server geared primarily toward embedded systems,
while striving to be fully functional and RFC compliant.
@@ -66,7 +66,7 @@ config DHCPD_LEASES_FILE
config UDHCPC
bool "udhcp client (udhcpc)"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
udhcpc is a DHCP client geared primarily toward embedded systems,
while striving to be fully functional and RFC compliant.
procps/Config.src+4 -3
@@ -10,7 +10,7 @@ INSERT
config FREE
bool "free"
default y
- depends on PLATFORM_LINUX #sysinfo()
+ select PLATFORM_LINUX #sysinfo()
help
free displays the total amount of free and used physical and swap
memory in the system, as well as the buffers used by the kernel.
@@ -99,7 +99,8 @@ config FEATURE_PS_WIDE
config FEATURE_PS_TIME
bool "Enable time and elapsed time output"
default y
- depends on PS && DESKTOP && PLATFORM_LINUX #sysinfo()
+ depends on PS && DESKTOP
+ select PLATFORM_LINUX
help
Support -o time and -o etime output specifiers.
@@ -196,7 +197,7 @@ config FEATURE_SHOW_THREADS
config UPTIME
bool "uptime"
default y
- depends on PLATFORM_LINUX #sysinfo()
+ select PLATFORM_LINUX #sysinfo()
help
uptime gives a one line display of the current time, how long
the system has been running, how many users are currently logged
sysklogd/Config.src+2 -1
@@ -119,7 +119,8 @@ config KLOGD
config FEATURE_KLOGD_KLOGCTL
bool "Use the klogctl() interface"
default y
- depends on KLOGD && PLATFORM_LINUX
+ depends on KLOGD
+ select PLATFORM_LINUX
help
The klogd applet supports two interfaces for reading
kernel messages. Linux provides the klogctl() interface
util-linux/Config.src+27 -27
@@ -10,7 +10,7 @@ INSERT
config ACPID
bool "acpid"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
acpid listens to ACPI events coming either in textual form from
/proc/acpi/event (though it is marked deprecated it is still widely
@@ -33,7 +33,7 @@ config FEATURE_ACPID_COMPAT
config BLKID
bool "blkid"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
select VOLUMEID
help
Lists labels and UUIDs of all filesystems.
@@ -50,7 +50,7 @@ config FEATURE_BLKID_TYPE
config DMESG
bool "dmesg"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
dmesg is used to examine or control the kernel ring buffer. When the
Linux kernel prints messages to the system log, they are stored in
@@ -84,7 +84,7 @@ config FEATURE_DMESG_PRETTY
config FBSET
bool "fbset"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
fbset is used to show or change the settings of a Linux frame buffer
device. The frame buffer device provides a simple and unique
@@ -113,7 +113,7 @@ config FEATURE_FBSET_READMODE
config FDFLUSH
bool "fdflush"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
fdflush is only needed when changing media on slightly-broken
removable media drives. It is used to make Linux believe that a
@@ -126,14 +126,14 @@ config FDFLUSH
config FDFORMAT
bool "fdformat"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
fdformat is used to low-level format a floppy disk.
config FDISK
bool "fdisk"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
The fdisk utility is used to divide hard disks into one or more
logical disks, which are generally called partitions. This utility
@@ -209,7 +209,7 @@ config FEATURE_FDISK_ADVANCED
config FINDFS
bool "findfs"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
select VOLUMEID
help
Prints the name of a filesystem with given label or UUID.
@@ -225,7 +225,7 @@ config FLOCK
config FREERAMDISK
bool "freeramdisk"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Linux allows you to create ramdisks. This utility allows you to
delete them and completely free all memory that was used for the
@@ -248,14 +248,14 @@ config FSCK_MINIX
config MKFS_EXT2
bool "mkfs_ext2"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Utility to create EXT2 filesystems.
config MKFS_MINIX
bool "mkfs_minix"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
The minix filesystem is a nice, small, compact, read-write filesystem
with little overhead. If you wish to be able to create minix
@@ -273,7 +273,7 @@ config FEATURE_MINIX2
config MKFS_REISER
bool "mkfs_reiser"
default n
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Utility to create ReiserFS filesystems.
Note: this applet needs a lot of testing and polishing.
@@ -281,7 +281,7 @@ config MKFS_REISER
config MKFS_VFAT
bool "mkfs_vfat"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Utility to create FAT32 filesystems.
@@ -330,7 +330,7 @@ config HD
config HWCLOCK
bool "hwclock"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
The hwclock utility is used to read and set the hardware clock
on a system. This is primarily used to set the current time on
@@ -369,7 +369,7 @@ config IPCRM
config IPCS
bool "ipcs"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
The ipcs utility is used to provide information on the currently
allocated System V interprocess (IPC) objects in the system.
@@ -377,7 +377,7 @@ config IPCS
config LOSETUP
bool "losetup"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
losetup is used to associate or detach a loop device with a regular
file or block device, and to query the status of a loop device. This
@@ -386,7 +386,7 @@ config LOSETUP
config LSPCI
bool "lspci"
default y
- #depends on PLATFORM_LINUX
+ #select PLATFORM_LINUX
help
lspci is a utility for displaying information about PCI buses in the
system and devices connected to them.
@@ -396,7 +396,7 @@ config LSPCI
config LSUSB
bool "lsusb"
default y
- #depends on PLATFORM_LINUX
+ #select PLATFORM_LINUX
help
lsusb is a utility for displaying information about USB buses in the
system and devices connected to them.
@@ -406,7 +406,7 @@ config LSUSB
config MDEV
bool "mdev"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
mdev is a mini-udev implementation for dynamically creating device
nodes in the /dev directory.
@@ -494,7 +494,7 @@ config MORE
config MOUNT
bool "mount"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
All files and filesystems in Unix are arranged into one big directory
tree. The 'mount' utility is used to graft a filesystem onto a
@@ -577,7 +577,7 @@ config FEATURE_MOUNT_FSTAB
config PIVOT_ROOT
bool "pivot_root"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
The pivot_root utility swaps the mount points for the root filesystem
with some other mounted filesystem. This allows you to do all sorts
@@ -605,14 +605,14 @@ config RDEV
config READPROFILE
bool "readprofile"
default y
- #depends on PLATFORM_LINUX
+ #select PLATFORM_LINUX
help
This allows you to parse /proc/profile for basic profiling.
config RTCWAKE
bool "rtcwake"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
Enter a system sleep state until specified wakeup time.
@@ -632,7 +632,7 @@ config SCRIPTREPLAY
config SETARCH
bool "setarch"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
The linux32 utility is used to create a 32bit environment for the
specified program (usually a shell). It only makes sense to have
@@ -642,7 +642,7 @@ config SETARCH
config SWAPONOFF
bool "swaponoff"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
This option enables both the 'swapon' and the 'swapoff' utilities.
Once you have created some swap space using 'mkswap', you also need
@@ -661,7 +661,7 @@ config FEATURE_SWAPON_PRI
config SWITCH_ROOT
bool "switch_root"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
The switch_root utility is used from initramfs to select a new
root device. Under initramfs, you have to use this instead of
@@ -681,7 +681,7 @@ config SWITCH_ROOT
config UMOUNT
bool "umount"
default y
- depends on PLATFORM_LINUX
+ select PLATFORM_LINUX
help
When you want to remove a mounted filesystem from its current mount
point, for example when you are shutting down the system, the