tests/FILEFORMAT: converted to markdown and extended
—
$ git checkout -f 7e53974603079a9522acdb10f3b4de499ffa6e4d
Previous HEAD position was d7471c1369 mime: properly check Content-Type even if it has parameters
HEAD is now at 7e53974603 tests/FILEFORMAT: converted to markdown and extended
$ git clean -fdx
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing curl-config
Removing depcomp
Removing docs/Makefile
Removing docs/Makefile.in
Removing docs/cmdline-opts/Makefile
Removing docs/cmdline-opts/Makefile.in
Removing docs/curl.1
Removing docs/examples/.deps/
Removing docs/examples/Makefile
Removing docs/examples/Makefile.in
Removing docs/libcurl/Makefile
Removing docs/libcurl/Makefile.in
Removing docs/libcurl/opts/Makefile
Removing docs/libcurl/opts/Makefile.in
Removing include/Makefile
Removing include/Makefile.in
Removing include/curl/Makefile
Removing include/curl/Makefile.in
Removing install-sh
Removing lib/.deps/
Removing lib/.dirstamp
Removing lib/.libs/
Removing lib/Makefile
Removing lib/Makefile.in
Removing lib/curl-curl_ctype.o
Removing lib/curl-nonblock.o
Removing lib/curl-strtoofft.o
Removing lib/curl-warnless.o
Removing lib/curl_config.h
Removing lib/curl_config.h.in
Removing lib/libcurl.la
Removing lib/libcurl.vers
Removing lib/libcurl_la-altsvc.lo
Removing lib/libcurl_la-altsvc.o
Removing lib/libcurl_la-amigaos.lo
Removing lib/libcurl_la-amigaos.o
Removing lib/libcurl_la-asyn-ares.lo
Removing lib/libcurl_la-asyn-ares.o
Removing lib/libcurl_la-asyn-thread.lo
Removing lib/libcurl_la-asyn-thread.o
Removing lib/libcurl_la-base64.lo
Removing lib/libcurl_la-base64.o
Removing lib/libcurl_la-conncache.lo
Removing lib/libcurl_la-conncache.o
Removing lib/libcurl_la-connect.lo
Removing lib/libcurl_la-connect.o
Removing lib/libcurl_la-content_encoding.lo
Removing lib/libcurl_la-content_encoding.o
Removing lib/libcurl_la-cookie.lo
Removing lib/libcurl_la-cookie.o
Removing lib/libcurl_la-curl_addrinfo.lo
Removing lib/libcurl_la-curl_addrinfo.o
Removing lib/libcurl_la-curl_ctype.lo
Removing lib/libcurl_la-curl_ctype.o
Removing lib/libcurl_la-curl_des.lo
Removing lib/libcurl_la-curl_des.o
Removing lib/libcurl_la-curl_endian.lo
Removing lib/libcurl_la-curl_endian.o
Removing lib/libcurl_la-curl_fnmatch.lo
Removing lib/libcurl_la-curl_fnmatch.o
Removing lib/libcurl_la-curl_get_line.lo
Removing lib/libcurl_la-curl_get_line.o
Removing lib/libcurl_la-curl_gethostname.lo
Removing lib/libcurl_la-curl_gethostname.o
Removing lib/libcurl_la-curl_gssapi.lo
Removing lib/libcurl_la-curl_gssapi.o
Removing lib/libcurl_la-curl_memrchr.lo
Removing lib/libcurl_la-curl_memrchr.o
Removing lib/libcurl_la-curl_multibyte.lo
Removing lib/libcurl_la-curl_multibyte.o
Removing lib/libcurl_la-curl_ntlm_core.lo
Removing lib/libcurl_la-curl_ntlm_core.o
Removing lib/libcurl_la-curl_ntlm_wb.lo
Removing lib/libcurl_la-curl_ntlm_wb.o
Removing lib/libcurl_la-curl_path.lo
Removing lib/libcurl_la-curl_path.o
Removing lib/libcurl_la-curl_range.lo
Removing lib/libcurl_la-curl_range.o
Removing lib/libcurl_la-curl_rtmp.lo
Removing lib/libcurl_la-curl_rtmp.o
Removing lib/libcurl_la-curl_sasl.lo
Removing lib/libcurl_la-curl_sasl.o
Removing lib/libcurl_la-curl_sspi.lo
Removing lib/libcurl_la-curl_sspi.o
Removing lib/libcurl_la-curl_threads.lo
Removing lib/libcurl_la-curl_threads.o
Removing lib/libcurl_la-dict.lo
Removing lib/libcurl_la-dict.o
Removing lib/libcurl_la-doh.lo
Removing lib/libcurl_la-doh.o
Removing lib/libcurl_la-dotdot.lo
Removing lib/libcurl_la-dotdot.o
Removing lib/libcurl_la-easy.lo
Removing lib/libcurl_la-easy.o
Removing lib/libcurl_la-escape.lo
Removing lib/libcurl_la-escape.o
Removing lib/libcurl_la-file.lo
Removing lib/libcurl_la-file.o
Removing lib/libcurl_la-fileinfo.lo
Removing lib/libcurl_la-fileinfo.o
Removing lib/libcurl_la-formdata.lo
Removing lib/libcurl_la-formdata.o
Removing lib/libcurl_la-ftp.lo
Removing lib/libcurl_la-ftp.o
Removing lib/libcurl_la-ftplistparser.lo
Removing lib/libcurl_la-ftplistparser.o
Removing lib/libcurl_la-getenv.lo
Removing lib/libcurl_la-getenv.o
Removing lib/libcurl_la-getinfo.lo
Removing lib/libcurl_la-getinfo.o
Removing lib/libcurl_la-gopher.lo
Removing lib/libcurl_la-gopher.o
Removing lib/libcurl_la-hash.lo
Removing lib/libcurl_la-hash.o
Removing lib/libcurl_la-hmac.lo
Removing lib/libcurl_la-hmac.o
Removing lib/libcurl_la-hostasyn.lo
Removing lib/libcurl_la-hostasyn.o
Removing lib/libcurl_la-hostcheck.lo
Removing lib/libcurl_la-hostcheck.o
Removing lib/libcurl_la-hostip.lo
Removing lib/libcurl_la-hostip.o
Removing lib/libcurl_la-hostip4.lo
Removing lib/libcurl_la-hostip4.o
Removing lib/libcurl_la-hostip6.lo
Removing lib/libcurl_la-hostip6.o
Removing lib/libcurl_la-hostsyn.lo
Removing lib/libcurl_la-hostsyn.o
Removing lib/libcurl_la-http.lo
Removing lib/libcurl_la-http.o
Removing lib/libcurl_la-http2.lo
Removing lib/libcurl_la-http2.o
Removing lib/libcurl_la-http_chunks.lo
Removing lib/libcurl_la-http_chunks.o
Removing lib/libcurl_la-http_digest.lo
Removing lib/libcurl_la-http_digest.o
Removing lib/libcurl_la-http_negotiate.lo
Removing lib/libcurl_la-http_negotiate.o
Removing lib/libcurl_la-http_ntlm.lo
Removing lib/libcurl_la-http_ntlm.o
Removing lib/libcurl_la-http_proxy.lo
Removing lib/libcurl_la-http_proxy.o
Removing lib/libcurl_la-idn_win32.lo
Removing lib/libcurl_la-idn_win32.o
Removing lib/libcurl_la-if2ip.lo
Removing lib/libcurl_la-if2ip.o
Removing lib/libcurl_la-imap.lo
Removing lib/libcurl_la-imap.o
Removing lib/libcurl_la-inet_ntop.lo
Removing lib/libcurl_la-inet_ntop.o
Removing lib/libcurl_la-inet_pton.lo
Removing lib/libcurl_la-inet_pton.o
Removing lib/libcurl_la-krb5.lo
Removing lib/libcurl_la-krb5.o
Removing lib/libcurl_la-ldap.lo
Removing lib/libcurl_la-ldap.o
Removing lib/libcurl_la-llist.lo
Removing lib/libcurl_la-llist.o
Removing lib/libcurl_la-md4.lo
Removing lib/libcurl_la-md4.o
Removing lib/libcurl_la-md5.lo
Removing lib/libcurl_la-md5.o
Removing lib/libcurl_la-memdebug.lo
Removing lib/libcurl_la-memdebug.o
Removing lib/libcurl_la-mime.lo
Removing lib/libcurl_la-mime.o
Removing lib/libcurl_la-mprintf.lo
Removing lib/libcurl_la-mprintf.o
Removing lib/libcurl_la-mqtt.lo
Removing lib/libcurl_la-mqtt.o
Removing lib/libcurl_la-multi.lo
Removing lib/libcurl_la-multi.o
Removing lib/libcurl_la-netrc.lo
Removing lib/libcurl_la-netrc.o
Removing lib/libcurl_la-non-ascii.lo
Removing lib/libcurl_la-non-ascii.o
Removing lib/libcurl_la-nonblock.lo
Removing lib/libcurl_la-nonblock.o
Removing lib/libcurl_la-openldap.lo
Removing lib/libcurl_la-openldap.o
Removing lib/libcurl_la-parsedate.lo
Removing lib/libcurl_la-parsedate.o
Removing lib/libcurl_la-pingpong.lo
Removing lib/libcurl_la-pingpong.o
Removing lib/libcurl_la-pop3.lo
Removing lib/libcurl_la-pop3.o
Removing lib/libcurl_la-progress.lo
Removing lib/libcurl_la-progress.o
Removing lib/libcurl_la-psl.lo
Removing lib/libcurl_la-psl.o
Removing lib/libcurl_la-rand.lo
Removing lib/libcurl_la-rand.o
Removing lib/libcurl_la-rename.lo
Removing lib/libcurl_la-rename.o
Removing lib/libcurl_la-rtsp.lo
Removing lib/libcurl_la-rtsp.o
Removing lib/libcurl_la-security.lo
Removing lib/libcurl_la-security.o
Removing lib/libcurl_la-select.lo
Removing lib/libcurl_la-select.o
Removing lib/libcurl_la-sendf.lo
Removing lib/libcurl_la-sendf.o
Removing lib/libcurl_la-setopt.lo
Removing lib/libcurl_la-setopt.o
Removing lib/libcurl_la-sha256.lo
Removing lib/libcurl_la-sha256.o
Removing lib/libcurl_la-share.lo
Removing lib/libcurl_la-share.o
Removing lib/libcurl_la-slist.lo
Removing lib/libcurl_la-slist.o
Removing lib/libcurl_la-smb.lo
Removing lib/libcurl_la-smb.o
Removing lib/libcurl_la-smtp.lo
Removing lib/libcurl_la-smtp.o
Removing lib/libcurl_la-socketpair.lo
Removing lib/libcurl_la-socketpair.o
Removing lib/libcurl_la-socks.lo
Removing lib/libcurl_la-socks.o
Removing lib/libcurl_la-socks_gssapi.lo
Removing lib/libcurl_la-socks_gssapi.o
Removing lib/libcurl_la-socks_sspi.lo
Removing lib/libcurl_la-socks_sspi.o
Removing lib/libcurl_la-speedcheck.lo
Removing lib/libcurl_la-speedcheck.o
Removing lib/libcurl_la-splay.lo
Removing lib/libcurl_la-splay.o
Removing lib/libcurl_la-strcase.lo
Removing lib/libcurl_la-strcase.o
Removing lib/libcurl_la-strdup.lo
Removing lib/libcurl_la-strdup.o
Removing lib/libcurl_la-strerror.lo
Removing lib/libcurl_la-strerror.o
Removing lib/libcurl_la-strtok.lo
Removing lib/libcurl_la-strtok.o
Removing lib/libcurl_la-strtoofft.lo
Removing lib/libcurl_la-strtoofft.o
Removing lib/libcurl_la-system_win32.lo
Removing lib/libcurl_la-system_win32.o
Removing lib/libcurl_la-telnet.lo
Removing lib/libcurl_la-telnet.o
Removing lib/libcurl_la-tftp.lo
Removing lib/libcurl_la-tftp.o
Removing lib/libcurl_la-timeval.lo
Removing lib/libcurl_la-timeval.o
Removing lib/libcurl_la-transfer.lo
Removing lib/libcurl_la-transfer.o
Removing lib/libcurl_la-url.lo
Removing lib/libcurl_la-url.o
Removing lib/libcurl_la-urlapi.lo
Removing lib/libcurl_la-urlapi.o
Removing lib/libcurl_la-version.lo
Removing lib/libcurl_la-version.o
Removing lib/libcurl_la-warnless.lo
Removing lib/libcurl_la-warnless.o
Removing lib/libcurl_la-wildcard.lo
Removing lib/libcurl_la-wildcard.o
Removing lib/libcurl_la-x509asn1.lo
Removing lib/libcurl_la-x509asn1.o
Removing lib/stamp-h1
Removing lib/vauth/.deps/
Removing lib/vauth/.dirstamp
Removing lib/vauth/libcurl_la-cleartext.lo
Removing lib/vauth/libcurl_la-cleartext.o
Removing lib/vauth/libcurl_la-cram.lo
Removing lib/vauth/libcurl_la-cram.o
Removing lib/vauth/libcurl_la-digest.lo
Removing lib/vauth/libcurl_la-digest.o
Removing lib/vauth/libcurl_la-digest_sspi.lo
Removing lib/vauth/libcurl_la-digest_sspi.o
Removing lib/vauth/libcurl_la-krb5_gssapi.lo
Removing lib/vauth/libcurl_la-krb5_gssapi.o
Removing lib/vauth/libcurl_la-krb5_sspi.lo
Removing lib/vauth/libcurl_la-krb5_sspi.o
Removing lib/vauth/libcurl_la-ntlm.lo
Removing lib/vauth/libcurl_la-ntlm.o
Removing lib/vauth/libcurl_la-ntlm_sspi.lo
Removing lib/vauth/libcurl_la-ntlm_sspi.o
Removing lib/vauth/libcurl_la-oauth2.lo
Removing lib/vauth/libcurl_la-oauth2.o
Removing lib/vauth/libcurl_la-spnego_gssapi.lo
Removing lib/vauth/libcurl_la-spnego_gssapi.o
Removing lib/vauth/libcurl_la-spnego_sspi.lo
Removing lib/vauth/libcurl_la-spnego_sspi.o
Removing lib/vauth/libcurl_la-vauth.lo
Removing lib/vauth/libcurl_la-vauth.o
Removing lib/vquic/.deps/
Removing lib/vquic/.dirstamp
Removing lib/vquic/libcurl_la-ngtcp2.lo
Removing lib/vquic/libcurl_la-ngtcp2.o
Removing lib/vquic/libcurl_la-quiche.lo
Removing lib/vquic/libcurl_la-quiche.o
Removing lib/vssh/.deps/
Removing lib/vssh/.dirstamp
Removing lib/vssh/libcurl_la-libssh.lo
Removing lib/vssh/libcurl_la-libssh.o
Removing lib/vssh/libcurl_la-libssh2.lo
Removing lib/vssh/libcurl_la-libssh2.o
Removing lib/vssh/libcurl_la-wolfssh.lo
Removing lib/vssh/libcurl_la-wolfssh.o
Removing lib/vtls/.deps/
Removing lib/vtls/.dirstamp
Removing lib/vtls/libcurl_la-bearssl.lo
Removing lib/vtls/libcurl_la-bearssl.o
Removing lib/vtls/libcurl_la-gskit.lo
Removing lib/vtls/libcurl_la-gskit.o
Removing lib/vtls/libcurl_la-gtls.lo
Removing lib/vtls/libcurl_la-gtls.o
Removing lib/vtls/libcurl_la-mbedtls.lo
Removing lib/vtls/libcurl_la-mbedtls.o
Removing lib/vtls/libcurl_la-mbedtls_threadlock.lo
Removing lib/vtls/libcurl_la-mbedtls_threadlock.o
Removing lib/vtls/libcurl_la-mesalink.lo
Removing lib/vtls/libcurl_la-mesalink.o
Removing lib/vtls/libcurl_la-nss.lo
Removing lib/vtls/libcurl_la-nss.o
Removing lib/vtls/libcurl_la-openssl.lo
Removing lib/vtls/libcurl_la-openssl.o
Removing lib/vtls/libcurl_la-schannel.lo
Removing lib/vtls/libcurl_la-schannel.o
Removing lib/vtls/libcurl_la-schannel_verify.lo
Removing lib/vtls/libcurl_la-schannel_verify.o
Removing lib/vtls/libcurl_la-sectransp.lo
Removing lib/vtls/libcurl_la-sectransp.o
Removing lib/vtls/libcurl_la-vtls.lo
Removing lib/vtls/libcurl_la-vtls.o
Removing lib/vtls/libcurl_la-wolfssl.lo
Removing lib/vtls/libcurl_la-wolfssl.o
Removing libcurl.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing packages/Makefile
Removing packages/Makefile.in
Removing packages/vms/Makefile
Removing packages/vms/Makefile.in
Removing scripts/Makefile
Removing scripts/Makefile.in
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/curl
Removing src/curl-slist_wc.o
Removing src/curl-tool_binmode.o
Removing src/curl-tool_bname.o
Removing src/curl-tool_cb_dbg.o
Removing src/curl-tool_cb_hdr.o
Removing src/curl-tool_cb_prg.o
Removing src/curl-tool_cb_rea.o
Removing src/curl-tool_cb_see.o
Removing src/curl-tool_cb_wrt.o
Removing src/curl-tool_cfgable.o
Removing src/curl-tool_convert.o
Removing src/curl-tool_dirhie.o
Removing src/curl-tool_doswin.o
Removing src/curl-tool_easysrc.o
Removing src/curl-tool_filetime.o
Removing src/curl-tool_formparse.o
Removing src/curl-tool_getparam.o
Removing src/curl-tool_getpass.o
Removing src/curl-tool_help.o
Removing src/curl-tool_helpers.o
Removing src/curl-tool_homedir.o
Removing src/curl-tool_hugehelp.o
Removing src/curl-tool_libinfo.o
Removing src/curl-tool_main.o
Removing src/curl-tool_metalink.o
Removing src/curl-tool_msgs.o
Removing src/curl-tool_operate.o
Removing src/curl-tool_operhlp.o
Removing src/curl-tool_panykey.o
Removing src/curl-tool_paramhlp.o
Removing src/curl-tool_parsecfg.o
Removing src/curl-tool_progress.o
Removing src/curl-tool_setopt.o
Removing src/curl-tool_sleep.o
Removing src/curl-tool_strdup.o
Removing src/curl-tool_urlglob.o
Removing src/curl-tool_util.o
Removing src/curl-tool_vms.o
Removing src/curl-tool_writeout.o
Removing src/curl-tool_writeout_json.o
Removing src/curl-tool_xattr.o
Removing src/tool_hugehelp.c
Removing test-driver
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/certs/Makefile
Removing tests/certs/Makefile.in
Removing tests/certs/scripts/Makefile
Removing tests/certs/scripts/Makefile.in
Removing tests/configurehelp.pm
Removing tests/data/Makefile
Removing tests/data/Makefile.in
Removing tests/libtest/.deps/
Removing tests/libtest/Makefile
Removing tests/libtest/Makefile.in
Removing tests/server/.deps/
Removing tests/server/Makefile
Removing tests/server/Makefile.in
Removing tests/unit/.deps/
Removing tests/unit/Makefile
Removing tests/unit/Makefile.in
$ autoreconf -fi
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Remember to add 'LT_INIT' to configure.ac.
configure.ac:44: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:44: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
m4/curl-confopts.m4:147: CURL_CHECK_OPTION_DEBUG is expanded from...
configure.ac:44: the top level
configure.ac:45: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:45: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
m4/curl-confopts.m4:181: CURL_CHECK_OPTION_OPTIMIZE is expanded from...
configure.ac:45: the top level
configure.ac:46: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:46: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
m4/curl-confopts.m4:360: CURL_CHECK_OPTION_WARNINGS is expanded from...
configure.ac:46: the top level
configure.ac:47: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:47: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
m4/curl-confopts.m4:394: CURL_CHECK_OPTION_WERROR is expanded from...
configure.ac:47: the top level
configure.ac:48: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:48: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
m4/curl-confopts.m4:94: CURL_CHECK_OPTION_CURLDEBUG is expanded from...
configure.ac:48: the top level
configure.ac:49: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:49: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
m4/curl-confopts.m4:237: CURL_CHECK_OPTION_SYMBOL_HIDING is expanded from...
configure.ac:49: the top level
configure.ac:50: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:50: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
m4/curl-confopts.m4:58: CURL_CHECK_OPTION_ARES is expanded from...
configure.ac:50: the top level
configure.ac:51: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:51: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
m4/curl-confopts.m4:328: CURL_CHECK_OPTION_RT is expanded from...
configure.ac:51: the top level
configure.ac:52: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:52: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
m4/curl-confopts.m4:658: CURL_CHECK_OPTION_ESNI is expanded from...
configure.ac:52: the top level
configure.ac:123: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:123: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
m4/curl-functions.m4:7304: CURL_COVERAGE is expanded from...
configure.ac:123: the top level
configure.ac:375: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:375: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:375: the top level
configure.ac:376: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:376: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:376: the top level
configure.ac:394: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:394: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:394: the top level
configure.ac:395: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:395: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:395: the top level
configure.ac:409: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:409: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:409: the top level
configure.ac:410: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:410: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:410: the top level
configure.ac:424: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:424: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:424: the top level
configure.ac:425: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:425: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:425: the top level
configure.ac:440: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:440: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:440: the top level
configure.ac:441: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:441: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:441: the top level
configure.ac:472: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:472: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:472: the top level
configure.ac:473: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:473: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:473: the top level
configure.ac:498: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:498: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:498: the top level
configure.ac:499: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:499: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:499: the top level
configure.ac:514: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:514: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:514: the top level
configure.ac:515: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:515: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:515: the top level
configure.ac:529: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:529: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:529: the top level
configure.ac:530: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:530: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:530: the top level
configure.ac:544: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:544: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:544: the top level
configure.ac:545: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:545: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:545: the top level
configure.ac:560: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:560: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:560: the top level
configure.ac:561: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:561: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:561: the top level
configure.ac:577: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:577: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:577: the top level
configure.ac:578: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:578: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:578: the top level
configure.ac:594: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:594: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:594: the top level
configure.ac:595: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:595: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:595: the top level
configure.ac:610: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:610: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:610: the top level
configure.ac:611: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:611: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:611: the top level
configure.ac:626: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:626: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:626: the top level
configure.ac:627: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:627: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:627: the top level
configure.ac:642: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:642: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:642: the top level
configure.ac:643: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:643: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:643: the top level
configure.ac:663: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:663: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:663: the top level
configure.ac:664: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:664: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:664: the top level
configure.ac:684: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:684: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:684: the top level
configure.ac:685: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:685: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:685: the top level
configure.ac:704: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:704: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:704: the top level
configure.ac:911: warning: The macro `AC_HEADER_TIME' is obsolete.
configure.ac:911: You should run autoupdate.
./lib/autoconf/headers.m4:743: AC_HEADER_TIME is expanded from...
acinclude.m4:1575: CURL_CHECK_FUNC_CLOCK_GETTIME_MONOTONIC is expanded from...
acinclude.m4:1618: CURL_CHECK_LIBS_CLOCK_GETTIME_MONOTONIC is expanded from...
configure.ac:911: the top level
configure.ac:932: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:932: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:932: the top level
configure.ac:933: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:933: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:933: the top level
configure.ac:1039: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1039: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1039: the top level
configure.ac:1040: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1040: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1040: the top level
configure.ac:1124: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1124: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1124: the top level
configure.ac:1129: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1129: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1129: the top level
configure.ac:1210: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1210: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1210: the top level
configure.ac:1211: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1211: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1211: the top level
configure.ac:1222: warning: The macro `AC_TRY_RUN' is obsolete.
configure.ac:1222: You should run autoupdate.
./lib/autoconf/general.m4:2997: AC_TRY_RUN is expanded from...
configure.ac:1222: the top level
configure.ac:1260: warning: The macro `AC_TRY_COMPILE' is obsolete.
configure.ac:1260: You should run autoupdate.
./lib/autoconf/general.m4:2847: AC_TRY_COMPILE is expanded from...
configure.ac:1260: the top level
configure.ac:1319: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1319: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1319: the top level
configure.ac:1326: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1326: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1326: the top level
configure.ac:1333: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1333: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1333: the top level
configure.ac:1499: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1499: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1499: the top level
configure.ac:1500: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1500: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1500: the top level
configure.ac:1526: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1526: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1526: the top level
configure.ac:1527: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1527: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1527: the top level
configure.ac:1531: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1531: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1531: the top level
configure.ac:1532: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1532: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1532: the top level
configure.ac:1561: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1561: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1561: the top level
configure.ac:1562: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1562: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1562: the top level
configure.ac:1566: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1566: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1566: the top level
configure.ac:1567: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1567: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1567: the top level
configure.ac:1591: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1591: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1591: the top level
configure.ac:1592: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1592: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1592: the top level
configure.ac:1627: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1627: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1627: the top level
configure.ac:1628: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1628: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1628: the top level
configure.ac:1646: warning: The macro `AC_TRY_LINK' is obsolete.
configure.ac:1646: You should run autoupdate.
./lib/autoconf/general.m4:2920: AC_TRY_LINK is expanded from...
configure.ac:1646: the top level
configure.ac:1738: warning: The macro `AC_TRY_LINK' is obsolete.
configure.ac:1738: You should run autoupdate.
./lib/autoconf/general.m4:2920: AC_TRY_LINK is expanded from...
lib/m4sugar/m4sh.m4:692: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:699: AS_IF is expanded from...
./lib/autoconf/libs.m4:100: AC_CHECK_LIB is expanded from...
lib/m4sugar/m4sh.m4:692: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:699: AS_IF is expanded from...
./lib/autoconf/libs.m4:100: AC_CHECK_LIB is expanded from...
configure.ac:1738: the top level
configure.ac:1738: warning: The macro `AC_TRY_LINK' is obsolete.
configure.ac:1738: You should run autoupdate.
./lib/autoconf/general.m4:2920: AC_TRY_LINK is expanded from...
lib/m4sugar/m4sh.m4:692: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:699: AS_IF is expanded from...
./lib/autoconf/general.m4:2894: _AC_LINK_IFELSE is expanded from...
./lib/autoconf/general.m4:2911: AC_LINK_IFELSE is expanded from...
./lib/autoconf/general.m4:2920: AC_TRY_LINK is expanded from...
lib/m4sugar/m4sh.m4:692: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:699: AS_IF is expanded from...
./lib/autoconf/libs.m4:100: AC_CHECK_LIB is expanded from...
lib/m4sugar/m4sh.m4:692: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:699: AS_IF is expanded from...
./lib/autoconf/libs.m4:100: AC_CHECK_LIB is expanded from...
configure.ac:1738: the top level
configure.ac:1951: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1951: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1951: the top level
configure.ac:1962: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1962: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1962: the top level
configure.ac:1997: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1997: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1997: the top level
configure.ac:1998: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:1998: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:1998: the top level
configure.ac:2014: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:2014: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:2014: the top level
configure.ac:2015: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:2015: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:2015: the top level
configure.ac:2175: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:2175: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:2175: the top level
configure.ac:2176: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:2176: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:2176: the top level
configure.ac:2269: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:2269: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:2269: the top level
configure.ac:2270: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:2270: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:2270: the top level
configure.ac:2372: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:2372: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:2372: the top level
configure.ac:2373: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:2373: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:2373: the top level
configure.ac:2463: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:2463: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:2463: the top level
configure.ac:2464: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:2464: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:2464: the top level
configure.ac:2554: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:2554: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:2554: the top level
configure.ac:2555: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:2555: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:2555: the top level
configure.ac:2720: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:2720: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
acinclude.m4:2163: CURL_CHECK_CA_BUNDLE is expanded from...
configure.ac:2720: the top level
configure.ac:2751: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:2751: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:2751: the top level
configure.ac:2752: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:2752: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:2752: the top level
configure.ac:2845: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:2845: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:2845: the top level
configure.ac:2846: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:2846: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:2846: the top level
configure.ac:2852: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:2852: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:2852: the top level
configure.ac:2853: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:2853: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:2853: the top level
configure.ac:2858: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:2858: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:2858: the top level
configure.ac:2859: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:2859: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:2859: the top level
configure.ac:3039: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:3039: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:3039: the top level
configure.ac:3040: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:3040: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:3040: the top level
configure.ac:3118: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:3118: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:3118: the top level
configure.ac:3119: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:3119: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:3119: the top level
configure.ac:3170: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:3170: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:3170: the top level
configure.ac:3171: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:3171: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:3171: the top level
configure.ac:3248: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:3248: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:3248: the top level
configure.ac:3249: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:3249: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:3249: the top level
configure.ac:3383: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:3383: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:3383: the top level
configure.ac:3384: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:3384: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:3384: the top level
configure.ac:3470: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:3470: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:3470: the top level
configure.ac:3471: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:3471: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:3471: the top level
configure.ac:3669: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:3669: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:3669: the top level
configure.ac:3670: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:3670: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:3670: the top level
configure.ac:3760: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:3760: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:3760: the top level
configure.ac:3761: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:3761: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:3761: the top level
configure.ac:3843: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:3843: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:3843: the top level
configure.ac:3844: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:3844: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:3844: the top level
configure.ac:3868: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:3868: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:3868: the top level
configure.ac:3869: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:3869: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:3869: the top level
configure.ac:3897: warning: The macro `AC_HEADER_STDC' is obsolete.
configure.ac:3897: You should run autoupdate.
./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from...
configure.ac:3897: the top level
configure.ac:3984: warning: The macro `AC_HEADER_TIME' is obsolete.
configure.ac:3984: You should run autoupdate.
./lib/autoconf/headers.m4:743: AC_HEADER_TIME is expanded from...
configure.ac:3984: the top level
configure.ac:4086: warning: The macro `AC_TYPE_SIGNAL' is obsolete.
configure.ac:4086: You should run autoupdate.
./lib/autoconf/types.m4:776: AC_TYPE_SIGNAL is expanded from...
configure.ac:4086: the top level
configure.ac:4266: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4266: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
m4/curl-confopts.m4:32: CURL_CHECK_OPTION_THREADED_RESOLVER is expanded from...
configure.ac:4266: the top level
configure.ac:4274: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4274: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4274: the top level
configure.ac:4276: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4276: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4276: the top level
configure.ac:4367: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4367: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4367: the top level
configure.ac:4368: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4368: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4368: the top level
configure.ac:4386: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4386: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4386: the top level
configure.ac:4387: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4387: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4387: the top level
configure.ac:4422: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4422: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4422: the top level
configure.ac:4423: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4423: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4423: the top level
configure.ac:4436: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4436: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
m4/curl-confopts.m4:599: CURL_CHECK_OPTION_NTLM_WB is expanded from...
configure.ac:4436: the top level
configure.ac:4445: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4445: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4445: the top level
configure.ac:4446: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4446: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4446: the top level
configure.ac:4471: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4471: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4471: the top level
configure.ac:4472: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4472: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4472: the top level
configure.ac:4504: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4504: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4504: the top level
configure.ac:4505: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4505: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4505: the top level
configure.ac:4522: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4522: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4522: the top level
configure.ac:4523: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4523: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4523: the top level
configure.ac:4540: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4540: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4540: the top level
configure.ac:4541: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4541: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4541: the top level
configure.ac:4558: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4558: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4558: the top level
configure.ac:4559: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4559: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4559: the top level
configure.ac:4576: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4576: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4576: the top level
configure.ac:4577: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4577: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4577: the top level
configure.ac:4594: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4594: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4594: the top level
configure.ac:4595: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4595: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4595: the top level
configure.ac:4612: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4612: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4612: the top level
configure.ac:4613: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4613: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4613: the top level
configure.ac:4630: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4630: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4630: the top level
configure.ac:4631: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4631: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4631: the top level
configure.ac:4649: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4649: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4649: the top level
configure.ac:4650: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:4650: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:4650: the top level
configure.ac:120: installing './compile'
configure.ac:179: installing './config.guess'
configure.ac:179: installing './config.sub'
configure.ac:120: installing './install-sh'
configure.ac:125: installing './missing'
docs/examples/Makefile.am: installing './depcomp'
parallel-tests: installing './test-driver'
$ bash -c find . -name config.guess -exec cp /usr/share/misc/config.guess {} \;
$ bash -c find . -name config.sub -exec cp /usr/share/misc/config.sub {} \;
$ chmod +x configure
$ ./configure --disable-shared --without-ssl --disable-docs
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable ESNI support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... ccache gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether ccache gcc accepts -g... yes
checking for ccache gcc option to enable C11 features... none needed
checking whether ccache gcc understands -c and -o together... yes
checking how to run the C preprocessor... ccache gcc -E
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of ccache gcc... gcc3
checking curl version... 7.70.0-DEV
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defined... no
checking if _THREAD_SAFE is actually needed... no
checking if _THREAD_SAFE is onwards defined... no
checking if _REENTRANT is already defined... no
checking if _REENTRANT is actually needed... no
checking if _REENTRANT is onwards defined... no
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking how to print strings... printf
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for fgrep... /usr/bin/grep -F
checking for ld used by ccache gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from ccache gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for sys/time.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if ccache gcc supports -fno-rtti -fno-exceptions... no
checking for ccache gcc option to produce PIC... -fPIC -DPIC
checking if ccache gcc PIC flag -fPIC -DPIC works... yes
checking if ccache gcc static flag -static works... yes
checking if ccache gcc supports -c -o file.o... yes
checking if ccache gcc supports -c -o file.o... (cached) yes
checking whether the ccache gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether to build shared libraries with -version-info... yes
checking whether to build shared libraries with -no-undefined... no
checking whether to build shared libraries with -mimpure-text... no
checking whether to build shared libraries with PIC... yes
checking whether to build static libraries with PIC... yes
checking whether to build shared libraries only... no
checking whether to build static libraries only... yes
checking for inline... inline
checking if cpp -P is needed... yes
checking if cpp -P works... yes
checking if compiler is DEC/Compaq/HP C... no
checking if compiler is HP-UX C... no
checking if compiler is IBM C... no
checking if compiler is Intel C... no
checking if compiler is clang... no
checking if compiler is GNU C... yes
checking if compiler is LCC... no
checking if compiler is SGI MIPSpro C... no
checking if compiler is SGI MIPS C... no
checking if compiler is SunPro C... no
checking if compiler is Tiny C... no
checking if compiler is Watcom C... no
checking if compiler accepts some basic options... yes
configure: compiler options added: -Werror-implicit-function-declaration
checking if compiler accepts debug disabling options... yes
configure: compiler options added:
checking if compiler optimizer assumed setting might be used... yes
checking if compiler accepts optimizer enabling options... yes
configure: compiler options added: -O2
checking if compiler accepts strict warning options... yes
configure: compiler options added: -Wno-system-headers
checking if compiler halts on compilation errors... yes
checking if compiler halts on negative sized arrays... yes
checking if compiler halts on function prototype mismatch... yes
checking if compiler supports hiding library internal symbols... yes
checking for windows.h... no
checking whether build target is a native Windows one... no
checking whether build target supports WIN32 file API... no
checking for good-to-use Mac CFLAGS... no
checking to see if the compiler supports __builtin_available()... no
checking whether to support http... yes
checking whether to support ftp... yes
checking whether to support file... yes
checking whether to support ldap... yes
checking whether to support ldaps... yes
checking whether to support rtsp... yes
checking whether to support proxies... yes
checking whether to support dict... yes
checking whether to support telnet... yes
checking whether to support tftp... yes
checking whether to support pop3... yes
checking whether to support imap... yes
checking whether to support smb... yes
checking whether to support smtp... yes
checking whether to support gopher... yes
checking whether to support mqtt... no
checking whether to provide built-in manual... yes
checking whether to enable generation of C code... yes
checking whether to use libgcc... no
checking if X/Open network library is required... no
checking for gethostbyname... yes
checking for windows.h... (cached) no
checking for winsock.h... (cached) no
checking for winsock2.h... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for time.h... yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for pkg-config... /usr/bin/pkg-config
checking for zlib options with pkg-config... found
checking for zlib.h... yes
configure: found both libz and libz.h header
checking for BrotliDecoderDecompress in -lbrotlidec... no
checking for brotli/decode.h... no
checking for lber.h... no
checking for ldap.h... no
checking for ldapssl.h... no
checking for ldap_ssl.h... no
checking for LDAP libraries... cannot find LDAP libraries
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... no
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS (Windows native builds only)... no
checking whether to enable Secure Transport... no
checking whether to enable Amiga native SSL/TLS (AmiSSL)... no
checking for library containing psl_builtin... -lpsl
checking for RTMP_Init in -lrtmp... no
checking whether versioned symbols are wanted... no
checking whether to enable Windows native IDN (Windows native builds only)... no
checking whether to build with libidn2... (assumed) yes
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libidn2 options with pkg-config... no
configure: IDN_LIBS: "-lidn2"
configure: IDN_LDFLAGS: ""
configure: IDN_CPPFLAGS: ""
configure: IDN_DIR: ""
checking if idn2_lookup_ul can be linked... no
checking for idn2.h... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libnghttp2 options with pkg-config... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libngtcp2 options with pkg-config... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for quiche options with pkg-config... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for fish options with pkg-config... no
checking for egrep... (cached) /usr/bin/grep -E
checking for malloc.h... yes
checking for memory.h... no
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for sys/select.h... yes
checking for sys/socket.h... yes
checking for sys/ioctl.h... yes
checking for sys/uio.h... yes
checking for assert.h... yes
checking for unistd.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for arpa/inet.h... yes
checking for net/if.h... yes
checking for netinet/in.h... yes
checking for netinet/in6.h... no
checking for sys/un.h... yes
checking for linux/tcp.h... yes
checking for netinet/tcp.h... yes
checking for netdb.h... yes
checking for sys/sockio.h... no
checking for sys/stat.h... (cached) yes
checking for sys/param.h... yes
checking for termios.h... yes
checking for termio.h... yes
checking for sgtty.h... yes
checking for fcntl.h... yes
checking for alloca.h... yes
checking for time.h... (cached) yes
checking for io.h... no
checking for pwd.h... yes
checking for utime.h... yes
checking for sys/utime.h... no
checking for sys/poll.h... yes
checking for poll.h... yes
checking for socket.h... no
checking for sys/resource.h... yes
checking for libgen.h... yes
checking for locale.h... yes
checking for errno.h... yes
checking for stdbool.h... yes
checking for arpa/tftp.h... yes
checking for sys/filio.h... no
checking for sys/wait.h... yes
checking for setjmp.h... yes
checking for an ANSI C-conforming const... yes
checking for compiler support of C99 variadic macro style... yes
checking for compiler support of old gcc variadic macro style... yes
checking for size_t... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for time.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for struct timeval... yes
checking run-time libs availability... fine
checking size of size_t... 8
checking size of long... 8
checking size of int... 4
checking size of short... 2
checking size of time_t... 8
checking size of off_t... 8
checking size of curl_off_t... 8
checking for long long... yes
checking if numberLL works... yes
checking for ssize_t... yes
checking for bool... yes
checking for sa_family_t... yes
checking if time_t is unsigned... no
checking for sys/types.h... (cached) yes
checking for poll.h... (cached) yes
checking for sys/poll.h... (cached) yes
checking for in_addr_t... yes
checking for struct sockaddr_storage... yes
checking for signal.h... yes
checking for sig_atomic_t... yes
checking if sig_atomic_t is already defined as volatile... no
checking return type of signal handlers... void
checking for sys/select.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for select... yes
checking types of args and return type for select... int,fd_set *,struct timeval *,int
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for recv... yes
checking types of args and return type for recv... int,void *,size_t,int,ssize_t
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for send... yes
checking types of args and return type for send... int,const void *,size_t,int,ssize_t
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for MSG_NOSIGNAL... yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking if alarm can be linked... yes
checking if alarm is prototyped... yes
checking if alarm is compilable... yes
checking if alarm usage allowed... yes
checking if alarm might be used... yes
checking for sys/types.h... (cached) yes
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
checking for sys/types.h... (cached) yes
checking for libgen.h... (cached) yes
checking if basename can be linked... yes
checking if basename is prototyped... yes
checking if basename is compilable... yes
checking if basename usage allowed... yes
checking if basename might be used... yes
checking for sys/types.h... (cached) yes
checking for socket.h... (cached) no
checking if closesocket can be linked... no
checking if closesocket might be used... no
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking if CloseSocket can be linked... no
checking if CloseSocket might be used... no
checking if connect can be linked... yes
checking if connect is prototyped... yes
checking if connect is compilable... yes
checking if connect usage allowed... yes
checking if connect might be used... yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking for fcntl.h... (cached) yes
checking if fcntl can be linked... yes
checking if fcntl is prototyped... yes
checking if fcntl is compilable... yes
checking if fcntl usage allowed... yes
checking if fcntl might be used... yes
checking if fcntl O_NONBLOCK is compilable... yes
checking if fcntl O_NONBLOCK usage allowed... yes
checking if fcntl O_NONBLOCK might be used... yes
checking for windows.h... (cached) no
checking for winsock2.h... (cached) no
checking for ws2tcpip.h... (cached) no
checking for sys/types.h... (cached) yes
checking for netdb.h... (cached) yes
checking if freeaddrinfo can be linked... yes
checking if freeaddrinfo is prototyped... yes
checking if freeaddrinfo is compilable... yes
checking if freeaddrinfo usage allowed... yes
checking if freeaddrinfo might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for netinet/in.h... (cached) yes
checking for ifaddrs.h... yes
checking if freeifaddrs can be linked... yes
checking if freeifaddrs is prototyped... yes
checking if freeifaddrs is compilable... yes
checking if freeifaddrs usage allowed... yes
checking if freeifaddrs might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/xattr.h... yes
checking if fsetxattr can be linked... yes
checking if fsetxattr is prototyped... yes
checking if fsetxattr takes 5 args.... yes
checking if fsetxattr is compilable... yes
checking if fsetxattr usage allowed... yes
checking if fsetxattr might be used... yes
checking if ftruncate can be linked... yes
checking if ftruncate is prototyped... yes
checking if ftruncate is compilable... yes
checking if ftruncate usage allowed... yes
checking if ftruncate might be used... yes
checking for sys/types.h... (cached) yes
checking for stdlib.h... (cached) yes
checking if getaddrinfo can be linked... yes
checking if getaddrinfo is prototyped... yes
checking if getaddrinfo is compilable... yes
checking if getaddrinfo seems to work... yes
checking if getaddrinfo usage allowed... yes
checking if getaddrinfo might be used... yes
checking if getaddrinfo is threadsafe... yes
checking if gai_strerror can be linked... yes
checking if gai_strerror is prototyped... yes
checking if gai_strerror is compilable... yes
checking if gai_strerror usage allowed... yes
checking if gai_strerror might be used... yes
checking if gethostbyaddr can be linked... yes
checking if gethostbyaddr is prototyped... yes
checking if gethostbyaddr is compilable... yes
checking if gethostbyaddr usage allowed... yes
checking if gethostbyaddr might be used... yes
checking if gethostbyaddr_r can be linked... yes
checking if gethostbyaddr_r is prototyped... yes
checking if gethostbyaddr_r takes 5 args.... no
checking if gethostbyaddr_r takes 7 args.... no
checking if gethostbyaddr_r takes 8 args.... yes
checking if gethostbyaddr_r is compilable... yes
checking if gethostbyaddr_r usage allowed... yes
checking if gethostbyaddr_r might be used... yes
checking if gethostbyname can be linked... yes
checking if gethostbyname is prototyped... yes
checking if gethostbyname is compilable... yes
checking if gethostbyname usage allowed... yes
checking if gethostbyname might be used... yes
checking if gethostbyname_r can be linked... yes
checking if gethostbyname_r is prototyped... yes
checking if gethostbyname_r takes 3 args.... no
checking if gethostbyname_r takes 5 args.... no
checking if gethostbyname_r takes 6 args.... yes
checking if gethostbyname_r is compilable... yes
checking if gethostbyname_r usage allowed... yes
checking if gethostbyname_r might be used... yes
checking if gethostname can be linked... yes
checking if gethostname is prototyped... yes
checking if gethostname is compilable... yes
checking for gethostname arg 2 data type... size_t
checking if gethostname usage allowed... yes
checking if gethostname might be used... yes
checking if getpeername can be linked... yes
checking if getpeername is prototyped... yes
checking if getpeername is compilable... yes
checking if getpeername usage allowed... yes
checking if getpeername might be used... yes
checking if getsockname can be linked... yes
checking if getsockname is prototyped... yes
checking if getsockname is compilable... yes
checking if getsockname usage allowed... yes
checking if getsockname might be used... yes
checking for net/if.h... (cached) yes
checking if if_nametoindex can be linked... yes
checking if if_nametoindex is prototyped... yes
checking if if_nametoindex is compilable... yes
checking if if_nametoindex usage allowed... yes
checking if if_nametoindex might be used... yes
checking if getifaddrs can be linked... yes
checking if getifaddrs is prototyped... yes
checking if getifaddrs is compilable... yes
checking if getifaddrs seems to work... yes
checking if getifaddrs usage allowed... yes
checking if getifaddrs might be used... yes
checking if getservbyport_r can be linked... yes
checking if getservbyport_r is prototyped... yes
checking if getservbyport_r takes 4 args.... no
checking if getservbyport_r takes 5 args.... no
checking if getservbyport_r takes 6 args.... yes
checking if getservbyport_r is compilable... yes
checking if getservbyport_r usage allowed... yes
checking if getservbyport_r might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for time.h... (cached) yes
checking if gmtime_r can be linked... yes
checking if gmtime_r is prototyped... yes
checking if gmtime_r is compilable... yes
checking if gmtime_r seems to work... yes
checking if gmtime_r usage allowed... yes
checking if gmtime_r might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for netinet/in.h... (cached) yes
checking for arpa/inet.h... (cached) yes
checking if inet_ntoa_r can be linked... no
checking if inet_ntoa_r might be used... no
checking if inet_ntop can be linked... yes
checking if inet_ntop is prototyped... yes
checking if inet_ntop is compilable... yes
checking if inet_ntop seems to work... yes
checking if inet_ntop usage allowed... yes
checking if inet_ntop might be used... yes
checking if inet_pton can be linked... yes
checking if inet_pton is prototyped... yes
checking if inet_pton is compilable... yes
checking if inet_pton seems to work... yes
checking if inet_pton usage allowed... yes
checking if inet_pton might be used... yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for sys/ioctl.h... (cached) yes
checking for stropts.h... no
checking if ioctl can be linked... yes
checking if ioctl is prototyped... yes
checking if ioctl is compilable... yes
checking if ioctl usage allowed... yes
checking if ioctl might be used... yes
checking if ioctl FIONBIO is compilable... yes
checking if ioctl FIONBIO usage allowed... yes
checking if ioctl FIONBIO might be used... yes
checking if ioctl SIOCGIFADDR is compilable... yes
checking if ioctl SIOCGIFADDR usage allowed... yes
checking if ioctl SIOCGIFADDR might be used... yes
checking if ioctlsocket can be linked... no
checking if ioctlsocket might be used... no
checking if IoctlSocket can be linked... no
checking if IoctlSocket might be used... no
checking if localtime_r can be linked... yes
checking if localtime_r is prototyped... yes
checking if localtime_r is compilable... yes
checking if localtime_r seems to work... yes
checking if localtime_r usage allowed... yes
checking if localtime_r might be used... yes
checking if memrchr can be linked... yes
checking if memrchr is prototyped... no
checking if memrchr might be used... no
checking if poll can be linked... yes
checking if poll is prototyped... yes
checking if poll is compilable... yes
checking if poll seems to work... yes
checking if poll usage allowed... yes
checking if poll might be used... yes
checking if setsockopt can be linked... yes
checking if setsockopt is prototyped... yes
checking if setsockopt is compilable... yes
checking if setsockopt usage allowed... yes
checking if setsockopt might be used... yes
checking if setsockopt SO_NONBLOCK is compilable... no
checking if setsockopt SO_NONBLOCK might be used... no
checking for sys/types.h... (cached) yes
checking for signal.h... (cached) yes
checking if sigaction can be linked... yes
checking if sigaction is prototyped... yes
checking if sigaction is compilable... yes
checking if sigaction usage allowed... yes
checking if sigaction might be used... yes
checking if siginterrupt can be linked... yes
checking if siginterrupt is prototyped... yes
checking if siginterrupt is compilable... yes
checking if siginterrupt usage allowed... yes
checking if siginterrupt might be used... yes
checking if signal can be linked... yes
checking if signal is prototyped... yes
checking if signal is compilable... yes
checking if signal usage allowed... yes
checking if signal might be used... yes
checking for sys/types.h... (cached) yes
checking for setjmp.h... (cached) yes
checking if sigsetjmp can be linked... no
checking if sigsetjmp seems a macro... yes
checking if sigsetjmp is compilable... yes
checking if sigsetjmp usage allowed... yes
checking if sigsetjmp might be used... yes
checking if socket can be linked... yes
checking if socket is prototyped... yes
checking if socket is compilable... yes
checking if socket usage allowed... yes
checking if socket might be used... yes
checking if socketpair can be linked... yes
checking if socketpair is prototyped... yes
checking if socketpair is compilable... yes
checking if socketpair usage allowed... yes
checking if socketpair might be used... yes
checking if strcasecmp can be linked... yes
checking if strcasecmp is prototyped... yes
checking if strcasecmp is compilable... yes
checking if strcasecmp usage allowed... yes
checking if strcasecmp might be used... yes
checking if strcmpi can be linked... no
checking if strcmpi might be used... no
checking if strdup can be linked... yes
checking if strdup is prototyped... yes
checking if strdup is compilable... yes
checking if strdup usage allowed... yes
checking if strdup might be used... yes
checking if strerror_r can be linked... yes
checking if strerror_r is prototyped... yes
checking if strerror_r is compilable... yes
checking if strerror_r is glibc like... no
checking if strerror_r is POSIX like... yes
checking if strerror_r seems to work... yes
checking if strerror_r usage allowed... yes
checking if strerror_r might be used... yes
checking if stricmp can be linked... no
checking if stricmp might be used... no
checking if strncasecmp can be linked... yes
checking if strncasecmp is prototyped... yes
checking if strncasecmp is compilable... yes
checking if strncasecmp usage allowed... yes
checking if strncasecmp might be used... yes
checking if strncmpi can be linked... no
checking if strncmpi might be used... no
checking if strnicmp can be linked... no
checking if strnicmp might be used... no
checking if strstr can be linked... yes
checking if strstr is prototyped... yes
checking if strstr is compilable... yes
checking if strstr usage allowed... yes
checking if strstr might be used... yes
checking if strtok_r can be linked... yes
checking if strtok_r is prototyped... yes
checking if strtok_r is compilable... yes
checking if strtok_r usage allowed... yes
checking if strtok_r might be used... yes
checking if strtoll can be linked... yes
checking if strtoll is prototyped... yes
checking if strtoll is compilable... yes
checking if strtoll usage allowed... yes
checking if strtoll might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/uio.h... (cached) yes
checking if writev can be linked... yes
checking if writev is prototyped... yes
checking if writev is compilable... yes
checking if writev usage allowed... yes
checking if writev might be used... yes
checking for ccache gcc options needed to detect all undeclared functions... none needed
checking whether getpwuid_r is declared... yes
checking for fnmatch... yes
checking for geteuid... yes
checking for getpass_r... no
checking deeper for getpass_r... but still no
checking for getppid... yes
checking for getpwuid... yes
checking for getpwuid_r... yes
checking for getrlimit... yes
checking for gettimeofday... yes
checking for if_nametoindex... yes
checking for mach_absolute_time... no
checking deeper for mach_absolute_time... but still no
checking for pipe... yes
checking for setlocale... yes
checking for setmode... no
checking deeper for setmode... but still no
checking for setrlimit... yes
checking for usleep... yes
checking for utime... yes
checking for utimes... yes
checking how to set a socket into non-blocking mode... fcntl O_NONBLOCK
checking for perl... /usr/bin/perl
checking for gnroff... no
checking for nroff... /usr/bin/nroff
checking how to use *nroff to get plain text from man pages... -man
checking whether to enable the threaded resolver... yes
checking whether to use POSIX threads for threaded resolver... auto
checking for pthread.h... yes
checking for pthread_create... yes
checking convert -I options to -isystem... yes
checking whether to enable verbose strings... yes
checking whether to enable SSPI support (Windows native builds only)... no
checking whether to enable cryptographic authentication methods... yes
checking whether to enable NTLM delegation to winbind's helper... no
checking whether to enable TLS-SRP authentication... yes
checking whether to enable Unix domain sockets... auto
checking for struct sockaddr_un.sun_path... yes
checking whether to support cookies... yes
checking whether to support HTTP authentication... yes
checking whether to support DoH... yes
checking whether to support the MIME API... yes
checking whether to support date parsing... yes
checking whether to support netrc parsing... yes
checking whether to support progress-meter... yes
checking whether to support DNS shuffling... yes
checking whether to support alt-svc... no
checking whether hiding of library internal symbols will actually happen... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating docs/Makefile
config.status: creating docs/examples/Makefile
config.status: creating docs/libcurl/Makefile
config.status: creating docs/libcurl/opts/Makefile
config.status: creating docs/cmdline-opts/Makefile
config.status: creating include/Makefile
config.status: creating include/curl/Makefile
config.status: creating src/Makefile
config.status: creating lib/Makefile
config.status: creating scripts/Makefile
config.status: creating lib/libcurl.vers
config.status: creating tests/Makefile
config.status: creating tests/certs/Makefile
config.status: creating tests/certs/scripts/Makefile
config.status: creating tests/data/Makefile
config.status: creating tests/server/Makefile
config.status: creating tests/libtest/Makefile
config.status: creating tests/unit/Makefile
config.status: creating packages/Makefile
config.status: creating packages/vms/Makefile
config.status: creating curl-config
config.status: creating libcurl.pc
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: amending lib/Makefile
configure: amending src/Makefile
configure: amending tests/unit/Makefile
configure: amending tests/server/Makefile
configure: amending tests/libtest/Makefile
configure: amending docs/examples/Makefile
configure: Configured to build curl/libcurl:
Host setup: x86_64-pc-linux-gnu
Install prefix: /usr/local
Compiler: ccache gcc
CFLAGS: -Werror-implicit-function-declaration -O2 -Wno-system-headers
CPPFLAGS:
LDFLAGS:
LIBS: -lpsl -lz
curl version: 7.70.0-DEV
SSL: no (--with-{ssl,gnutls,nss,mbedtls,wolfssl,schannel,secure-transport,mesalink,amissl,bearssl} )
SSH: no (--with-{libssh,libssh2})
zlib: enabled
brotli: no (--with-brotli)
GSS-API: no (--with-gssapi)
TLS-SRP: no (--enable-tls-srp)
resolver: POSIX threaded
IPv6: enabled
Unix sockets: enabled
IDN: no (--with-{libidn2,winidn})
Build libcurl: Shared=no, Static=yes
Built-in manual: enabled
--libcurl option: enabled (--disable-libcurl-option)
Verbose errors: enabled (--disable-verbose)
Code coverage: disabled
SSPI: no (--enable-sspi)
ca cert bundle: no
ca cert path:
ca fallback:
LDAP: no (--enable-ldap / --with-ldap-lib / --with-lber-lib)
LDAPS: no (--enable-ldaps)
RTSP: enabled
RTMP: no (--with-librtmp)
Metalink: no (--with-libmetalink)
PSL: enabled
Alt-svc: no (--enable-alt-svc)
HTTP2: disabled (--with-nghttp2)
HTTP3: disabled (--with-ngtcp2, --with-quiche)
ESNI: no (--enable-esni)
Protocols: DICT FILE FTP GOPHER HTTP IMAP POP3 RTSP SMTP TELNET TFTP
Features: IPv6 UnixSockets libz AsynchDNS PSL
configure: WARNING: Cannot find libraries for LDAP support: LDAP disabled
configure: WARNING: SSL disabled, you will not be able to use HTTPS, FTPS, NTLM and more.
configure: WARNING: Use --with-ssl, --with-gnutls, --with-wolfssl, --with-mbedtls, --with-nss, --with-schannel, --with-secure-transport, --with-mesalink, --with-amissl or --with-bearssl to address this.
configure: WARNING: Cannot find libraries for IDN support: IDN disabled
$ make -j3
Making all in lib
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
make all-am
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
CC libcurl_la-altsvc.lo
CC libcurl_la-asyn-ares.lo
CC libcurl_la-amigaos.lo
CC libcurl_la-asyn-thread.lo
CC libcurl_la-base64.lo
CC libcurl_la-conncache.lo
CC libcurl_la-connect.lo
CC libcurl_la-content_encoding.lo
CC libcurl_la-cookie.lo
CC libcurl_la-curl_addrinfo.lo
CC libcurl_la-curl_ctype.lo
CC libcurl_la-curl_des.lo
CC libcurl_la-curl_endian.lo
CC libcurl_la-curl_fnmatch.lo
CC libcurl_la-curl_get_line.lo
CC libcurl_la-curl_gethostname.lo
CC libcurl_la-curl_gssapi.lo
CC libcurl_la-curl_multibyte.lo
CC libcurl_la-curl_memrchr.lo
CC libcurl_la-curl_ntlm_core.lo
CC libcurl_la-curl_ntlm_wb.lo
CC libcurl_la-curl_path.lo
CC libcurl_la-curl_range.lo
CC libcurl_la-curl_rtmp.lo
CC libcurl_la-curl_sasl.lo
CC libcurl_la-curl_sspi.lo
CC libcurl_la-curl_threads.lo
CC libcurl_la-dict.lo
CC libcurl_la-dotdot.lo
CC libcurl_la-easy.lo
CC libcurl_la-escape.lo
CC libcurl_la-file.lo
CC libcurl_la-fileinfo.lo
CC libcurl_la-formdata.lo
CC libcurl_la-ftp.lo
CC libcurl_la-url.lo
CC libcurl_la-ftplistparser.lo
CC libcurl_la-getinfo.lo
CC libcurl_la-getenv.lo
CC libcurl_la-gopher.lo
CC libcurl_la-hash.lo
CC libcurl_la-hmac.lo
CC libcurl_la-hostasyn.lo
CC libcurl_la-hostcheck.lo
CC libcurl_la-hostip.lo
CC libcurl_la-hostip4.lo
CC libcurl_la-hostip6.lo
CC libcurl_la-hostsyn.lo
CC libcurl_la-http.lo
CC libcurl_la-http2.lo
CC libcurl_la-http_chunks.lo
CC libcurl_la-http_digest.lo
CC libcurl_la-http_negotiate.lo
CC libcurl_la-http_ntlm.lo
CC libcurl_la-http_proxy.lo
CC libcurl_la-idn_win32.lo
CC libcurl_la-if2ip.lo
CC libcurl_la-imap.lo
CC libcurl_la-inet_ntop.lo
CC libcurl_la-inet_pton.lo
CC libcurl_la-krb5.lo
CC libcurl_la-ldap.lo
CC libcurl_la-llist.lo
CC libcurl_la-md4.lo
CC libcurl_la-md5.lo
CC libcurl_la-memdebug.lo
CC libcurl_la-mime.lo
CC libcurl_la-mprintf.lo
CC libcurl_la-mqtt.lo
CC libcurl_la-multi.lo
CC libcurl_la-netrc.lo
CC libcurl_la-non-ascii.lo
CC libcurl_la-nonblock.lo
CC libcurl_la-openldap.lo
CC libcurl_la-parsedate.lo
CC libcurl_la-pingpong.lo
CC libcurl_la-pop3.lo
CC libcurl_la-progress.lo
CC libcurl_la-psl.lo
CC libcurl_la-doh.lo
CC libcurl_la-rand.lo
CC libcurl_la-rename.lo
CC libcurl_la-rtsp.lo
CC libcurl_la-security.lo
CC libcurl_la-select.lo
CC libcurl_la-sendf.lo
CC libcurl_la-setopt.lo
CC libcurl_la-sha256.lo
CC libcurl_la-share.lo
CC libcurl_la-slist.lo
CC libcurl_la-smb.lo
CC libcurl_la-smtp.lo
CC libcurl_la-socketpair.lo
CC libcurl_la-socks.lo
CC libcurl_la-socks_gssapi.lo
CC libcurl_la-socks_sspi.lo
CC libcurl_la-speedcheck.lo
CC libcurl_la-splay.lo
CC libcurl_la-strcase.lo
CC libcurl_la-strdup.lo
CC libcurl_la-strerror.lo
CC libcurl_la-strtok.lo
CC libcurl_la-strtoofft.lo
CC libcurl_la-system_win32.lo
CC libcurl_la-telnet.lo
CC libcurl_la-tftp.lo
CC libcurl_la-timeval.lo
CC libcurl_la-transfer.lo
CC libcurl_la-urlapi.lo
CC libcurl_la-version.lo
CC libcurl_la-warnless.lo
CC libcurl_la-wildcard.lo
CC libcurl_la-x509asn1.lo
CC vauth/libcurl_la-cleartext.lo
CC vauth/libcurl_la-cram.lo
CC vauth/libcurl_la-digest.lo
CC vauth/libcurl_la-digest_sspi.lo
CC vauth/libcurl_la-krb5_gssapi.lo
CC vauth/libcurl_la-krb5_sspi.lo
CC vauth/libcurl_la-ntlm.lo
CC vauth/libcurl_la-ntlm_sspi.lo
CC vauth/libcurl_la-oauth2.lo
CC vauth/libcurl_la-spnego_gssapi.lo
CC vauth/libcurl_la-spnego_sspi.lo
CC vauth/libcurl_la-vauth.lo
CC vtls/libcurl_la-bearssl.lo
CC vtls/libcurl_la-gskit.lo
CC vtls/libcurl_la-gtls.lo
CC vtls/libcurl_la-mbedtls.lo
CC vtls/libcurl_la-mbedtls_threadlock.lo
CC vtls/libcurl_la-mesalink.lo
CC vtls/libcurl_la-nss.lo
CC vtls/libcurl_la-openssl.lo
CC vtls/libcurl_la-schannel.lo
CC vtls/libcurl_la-schannel_verify.lo
CC vtls/libcurl_la-sectransp.lo
CC vtls/libcurl_la-vtls.lo
CC vtls/libcurl_la-wolfssl.lo
CC vquic/libcurl_la-ngtcp2.lo
CC vquic/libcurl_la-quiche.lo
CC vssh/libcurl_la-libssh.lo
CC vssh/libcurl_la-libssh2.lo
CC vssh/libcurl_la-wolfssh.lo
CCLD libcurl.la
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
Making all in src
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/src'
Making all in ../docs
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
Making all in .
make[3]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
if test "..x" != "..x" -a -e "./curl.1"; then \
/usr/bin/install -c -m 644 "./curl.1" /root/asi_db/builds/curl/_worktrees/w0/docs/curl.1; fi
cd cmdline-opts && make
make[4]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
generate ../../docs/curl.1
make[4]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
make[3]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
Making all in cmdline-opts
make[3]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/src'
CC curl-tool_bname.o
CC curl-slist_wc.o
CC curl-tool_binmode.o
CC curl-tool_cb_dbg.o
CC curl-tool_cb_prg.o
CC curl-tool_cb_hdr.o
CC curl-tool_cb_rea.o
CC curl-tool_cb_wrt.o
CC curl-tool_cb_see.o
CC curl-tool_cfgable.o
CC curl-tool_convert.o
CC curl-tool_dirhie.o
CC curl-tool_doswin.o
CC curl-tool_easysrc.o
CC curl-tool_filetime.o
CC curl-tool_formparse.o
CC curl-tool_getparam.o
CC curl-tool_getpass.o
CC curl-tool_helpers.o
CC curl-tool_help.o
CC curl-tool_homedir.o
HUGE tool_hugehelp.c
CC curl-tool_libinfo.o
CC curl-tool_main.o
CC curl-tool_metalink.o
CC curl-tool_msgs.o
CC curl-tool_operate.o
CC curl-tool_operhlp.o
CC curl-tool_panykey.o
CC curl-tool_paramhlp.o
CC curl-tool_parsecfg.o
CC curl-tool_progress.o
CC curl-tool_strdup.o
CC curl-tool_setopt.o
CC curl-tool_sleep.o
CC curl-tool_urlglob.o
CC curl-tool_util.o
CC curl-tool_vms.o
CC curl-tool_writeout.o
CC curl-tool_writeout_json.o
CC curl-tool_xattr.o
CC ../lib/curl-nonblock.o
CC ../lib/curl-strtoofft.o
CC ../lib/curl-warnless.o
CC ../lib/curl-curl_ctype.o
CC curl-tool_hugehelp.o
CCLD curl
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/src'
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/src'
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0'
| @@ -1,485 +0,0 @@ | |
| - | The test suite's file format is very simple and extensible, closely |
| - | resembling XML. All data for a single test case resides in a single |
| - | ASCII file. Labels mark the beginning and the end of all sections, and each |
| - | label must be written in its own line. Comments are either XML-style |
| - | (enclosed with <!-- and -->) or C-style (beginning with #) and must appear |
| - | on their own lines and not alongside actual test data. Most test data files |
| - | are syntactically valid XML, although a few files are not (lack of |
| - | support for character entities and the preservation of CR/LF characters at |
| - | the end of lines are the biggest differences). |
| - | |
| - | The file begins with a 'testcase' tag, which encompasses the remainder of |
| - | the file. |
| - | |
| - | <testcase> |
| - | |
| - | Each file is split up in three main sections: reply, client and verify. The |
| - | reply section is used for the server to know what to send as a reply for the |
| - | requests curl sends, the client section defines how the client should behave |
| - | while the verify section defines how to verify that the data stored after a |
| - | command has been run ended up correctly. |
| - | |
| - | Each main section has a number of available subsections that can be |
| - | specified, that will be checked/used if specified. This document includes all |
| - | the subsections currently supported. |
| - | |
| - | Main sections are 'info', 'reply', 'client' and 'verify'. |
| - | |
| - | <info> |
| - | <keywords> |
| - | A newline-separated list of keywords describing what this test case uses and |
| - | tests. Try to use an already used keyword. These keywords will be used for |
| - | statistical/informational purposes and for choosing or skipping classes |
| - | of tests. "Keywords" must begin with an alphabetic character, "-", "[" |
| - | or "{" and may actually consist of multiple words separated by spaces |
| - | which are treated together as a single identifier. |
| - | </keywords> |
| - | </info> |
| - | |
| - | <reply> |
| - | <data [nocheck="yes"] [sendzero="yes"] [base64="yes"] [hex="yes"]> |
| - | data to be sent to the client on its request and later verified that it arrived |
| - | safely. Set nocheck="yes" to prevent the test script from verifying the arrival |
| - | of this data. |
| - | |
| - | If the data contains 'swsclose' anywhere within the start and end tag, and |
| - | this is a HTTP test, then the connection will be closed by the server after |
| - | this response is sent. If not, the connection will be kept persistent. |
| - | |
| - | If the data contains 'swsbounce' anywhere within the start and end tag, the |
| - | HTTP server will detect if this is a second request using the same test and |
| - | part number and will then increase the part number with one. This is useful |
| - | for auth tests and similar. |
| - | |
| - | 'sendzero' set to yes means that the (FTP) server will "send" the data even if |
| - | the size is zero bytes. Used to verify curl's behaviour on zero bytes |
| - | transfers. |
| - | |
| - | 'base64' set to yes means that the data provided in the test-file is a chunk |
| - | of data encoded with base64. It is the only way a test case can contain binary |
| - | data. (This attribute can in fact be used on any section, but it doesn't make |
| - | much sense for other sections than "data"). |
| - | |
| - | 'hex' set to yes means that the data is a sequence of hex pairs. It will get |
| - | decoded and used as "raw" data. |
| - | |
| - | For FTP file listings, the <data> section will be used *only* if you make sure |
| - | that there has been a CWD done first to a directory named 'test-[num]' where |
| - | [num] is the test case number. Otherwise the ftp server can't know from which |
| - | test file to load the list content. |
| - | |
| - | </data> |
| - | <dataNUM> |
| - | Send back this contents instead of the <data> one. The num is set by: |
| - | A) The test number in the request line is >10000 and this is the remainder |
| - | of [test case number]%10000. |
| - | B) The request was HTTP and included digest details, which adds 1000 to NUM |
| - | C) If a HTTP request is NTLM type-1, it adds 1001 to num |
| - | D) If a HTTP request is NTLM type-3, it adds 1002 to num |
| - | E) If a HTTP request is Basic and num is already >=1000, it adds 1 to num |
| - | F) If a HTTP request is Negotiate, num gets incremented by one for each |
| - | request with Negotiate authorization header on the same test case. |
| - | |
| - | Dynamically changing num in this way allows the test harness to be used to |
| - | test authentication negotiation where several different requests must be sent |
| - | to complete a transfer. The response to each request is found in its own data |
| - | section. Validating the entire negotiation sequence can be done by |
| - | specifying a datacheck section. |
| - | </dataNUM> |
| - | <connect> |
| - | The connect section is used instead of the 'data' for all CONNECT |
| - | requests. The remainder of the rules for the data section then apply but with |
| - | a connect prefix. |
| - | </connect> |
| - | <datacheck [mode="text"] [nonewline="yes"]> |
| - | if the data is sent but this is what should be checked afterwards. If |
| - | 'nonewline' is set, we will cut off the trailing newline of this given data |
| - | before comparing with the one actually received by the client. |
| - | |
| - | Use the mode="text" attribute if the output is in text mode on platforms that |
| - | have a text/binary difference. |
| - | </datacheck> |
| - | <datacheckNUM [nonewline="yes"] [mode="text"]> |
| - | The contents of numbered datacheck sections are appended to the non-numbered |
| - | one. |
| - | </datacheckNUM> |
| - | <size> |
| - | number to return on a ftp SIZE command (set to -1 to make this command fail) |
| - | </size> |
| - | <mdtm> |
| - | what to send back if the client sends a (FTP) MDTM command, set to -1 to |
| - | have it return that the file doesn't exist |
| - | </mdtm> |
| - | <postcmd> |
| - | special purpose server-command to control its behavior *after* the |
| - | reply is sent |
| - | For HTTP/HTTPS, these are supported: |
| - | |
| - | wait [secs] |
| - | - Pause for the given time |
| - | </postcmd> |
| - | <servercmd> |
| - | Special-commands for the server. |
| - | For FTP/SMTP/POP/IMAP, these are supported: |
| - | |
| - | REPLY [command] [return value] [response string] |
| - | - Changes how the server responds to the [command]. [response string] is |
| - | evaluated as a perl string, so it can contain embedded \r\n, for example. |
| - | There's a special [command] named "welcome" (without quotes) which is the |
| - | string sent immediately on connect as a welcome. |
| - | REPLYLF (like above but sends the response terminated with LF-only and not |
| - | CRLF) |
| - | COUNT [command] [num] |
| - | - Do the REPLY change for [command] only [num] times and then go back to the |
| - | built-in approach |
| - | DELAY [command] [secs] |
| - | - Delay responding to this command for the given time |
| - | RETRWEIRDO |
| - | - Enable the "weirdo" RETR case when multiple response lines appear at once |
| - | when a file is transferred |
| - | RETRNOSIZE |
| - | - Make sure the RETR response doesn't contain the size of the file |
| - | NOSAVE |
| - | - Don't actually save what is received |
| - | SLOWDOWN |
| - | - Send FTP responses with 0.01 sec delay between each byte |
| - | PASVBADIP |
| - | - makes PASV send back an illegal IP in its 227 response |
| - | CAPA [capabilities] |
| - | - Enables support for and specifies a list of space separated capabilities to |
| - | return to the client for the IMAP CAPABILITY, POP3 CAPA and SMTP EHLO |
| - | commands |
| - | AUTH [mechanisms] |
| - | - Enables support for SASL authentication and specifies a list of space |
| - | separated mechanisms for IMAP, POP3 and SMTP |
| - | |
| - | For HTTP/HTTPS: |
| - | auth_required if this is set and a POST/PUT is made without auth, the |
| - | server will NOT wait for the full request body to get sent |
| - | idle do nothing after receiving the request, just "sit idle" |
| - | stream continuously send data to the client, never-ending |
| - | writedelay: [secs] delay this amount between reply packets |
| - | skip: [num] instructs the server to ignore reading this many bytes from a |
| - | PUT or POST request |
| - | rtp: part [num] channel [num] size [num] |
| - | stream a fake RTP packet for the given part on a chosen channel |
| - | with the given payload size |
| - | connection-monitor When used, this will log [DISCONNECT] to the server.input |
| - | log when the connection is disconnected. |
| - | upgrade when an HTTP upgrade header is found, the server will upgrade |
| - | to http2 |
| - | swsclose instruct server to close connection after response |
| - | no-expect don't read the request body if Expect: is present |
| - | |
| - | For TFTP: |
| - | writedelay: [secs] delay this amount between reply packets (each packet being |
| - | 512 bytes payload) |
| - | </servercmd> |
| - | </reply> |
| - | |
| - | <client> |
| - | |
| - | <server> |
| - | What server(s) this test case requires/uses: |
| - | |
| - | file |
| - | ftp |
| - | ftp-ipv6 |
| - | ftps |
| - | http |
| - | http-ipv6 |
| - | http-proxy |
| - | http-unix |
| - | https |
| - | httptls+srp |
| - | httptls+srp-ipv6 |
| - | http/2 |
| - | imap |
| - | none |
| - | pop3 |
| - | rtsp |
| - | rtsp-ipv6 |
| - | scp |
| - | sftp |
| - | smtp |
| - | socks4 |
| - | socks5 |
| - | |
| - | Give only one per line. This subsection is mandatory. |
| - | </server> |
| - | |
| - | <features> |
| - | A list of features that MUST be present in the client/library for this test to |
| - | be able to run. If a required feature is not present then the test will be |
| - | SKIPPED. |
| - | |
| - | Alternatively a feature can be prefixed with an exclamation mark to indicate a |
| - | feature is NOT required. If the feature is present then the test will be |
| - | SKIPPED. |
| - | |
| - | Features testable here are: |
| - | |
| - | alt-svc |
| - | crypto |
| - | debug |
| - | getrlimit |
| - | GnuTLS |
| - | GSS-API |
| - | http/2 |
| - | idn |
| - | ipv6 |
| - | Kerberos |
| - | large_file |
| - | ld_preload |
| - | libz |
| - | manual |
| - | Metalink |
| - | NSS |
| - | NTLM |
| - | OpenSSL |
| - | PSL |
| - | socks |
| - | SPNEGO |
| - | SSL |
| - | SSLpinning |
| - | SSPI |
| - | threaded-resolver |
| - | TLS-SRP |
| - | TrackMemory |
| - | unittest |
| - | unix-sockets |
| - | win32 |
| - | WinSSL |
| - | |
| - | as well as each protocol that curl supports. A protocol only needs to be |
| - | specified if it is different from the server (useful when the server |
| - | is 'none'). |
| - | </features> |
| - | |
| - | <killserver> |
| - | Using the same syntax as in <server> but when mentioned here these servers |
| - | are explicitly KILLED when this test case is completed. Only use this if there |
| - | is no other alternatives. Using this of course requires subsequent tests to |
| - | restart servers. |
| - | </killserver> |
| - | |
| - | <precheck> |
| - | A command line that if set gets run by the test script before the test. If an |
| - | output is displayed by the command or if the return code is non-zero, the test |
| - | will be skipped and the (single-line) output will be displayed as reason for |
| - | not running the test. Variables are substituted as in the <command> section. |
| - | </precheck> |
| - | |
| - | <postcheck> |
| - | A command line that if set gets run by the test script after the test. If |
| - | the command exists with a non-zero status code, the test will be considered |
| - | to have failed. Variables are substituted as in the <command> section. |
| - | </postcheck> |
| - | |
| - | <tool> |
| - | Name of tool to use instead of "curl". This tool must be built and exist |
| - | either in the libtest/ directory (if the tool starts with 'lib') or in the |
| - | unit/ directory (if the tool starts with 'unit'). |
| - | </tool> |
| - | |
| - | <name> |
| - | test case description |
| - | </name> |
| - | |
| - | <setenv> |
| - | variable1=contents1 |
| - | variable2=contents2 |
| - | |
| - | Set the given environment variables to the specified value before the actual |
| - | command is run. They are cleared again after the command has been run. |
| - | Variables are first substituted as in the <command> section. |
| - | </setenv> |
| - | |
| - | <command [option="no-output/no-include/force-output/binary-trace"] |
| - | [timeout="secs"][delay="secs"][type="perl"]> |
| - | command line to run, there's a bunch of %variables that get replaced |
| - | accordingly. |
| - | |
| - | Note that the URL that gets passed to the server actually controls what data |
| - | that is returned. The last slash in the URL must be followed by a number. That |
| - | number (N) will be used by the test-server to load test case N and return the |
| - | data that is defined within the <reply><data></data></reply> section. |
| - | |
| - | If there's no test number found above, the HTTP test server will use the |
| - | number following the last dot in the given hostname (made so that a CONNECT |
| - | can still pass on test number) so that "foo.bar.123" gets treated as test case |
| - | 123. Alternatively, if an IPv6 address is provided to CONNECT, the last |
| - | hexadecimal group in the address will be used as the test number! For example |
| - | the address "[1234::ff]" would be treated as test case 255. |
| - | |
| - | Set type="perl" to write the test case as a perl script. It implies that |
| - | there's no memory debugging and valgrind gets shut off for this test. |
| - | |
| - | Set option="no-output" to prevent the test script to slap on the --output |
| - | argument that directs the output to a file. The --output is also not added if |
| - | the verify/stdout section is used. |
| - | |
| - | Set option="force-output" to make use of --output even when the test is |
| - | otherwise written to verify stdout. |
| - | |
| - | Set option="no-include" to prevent the test script to slap on the --include |
| - | argument. |
| - | |
| - | Set option="binary-trace" to use --trace instead of --trace-ascii for tracing. |
| - | Suitable for binary-oriented protocols such as MQTT. |
| - | |
| - | Set timeout="secs" to override default server logs advisor read lock timeout. |
| - | This timeout is used by the test harness, once that the command has completed |
| - | execution, to wait for the test server to write out server side log files and |
| - | remove the lock that advised not to read them. The "secs" parameter is the not |
| - | negative integer number of seconds for the timeout. This 'timeout' attribute |
| - | is documented for completeness sake, but is deep test harness stuff and only |
| - | needed for very singular and specific test cases. Avoid using it. |
| - | |
| - | Set delay="secs" to introduce a time delay once that the command has completed |
| - | execution and before the <postcheck> section runs. The "secs" parameter is the |
| - | not negative integer number of seconds for the delay. This 'delay' attribute |
| - | is intended for very specific test cases, and normally not needed. |
| - | |
| - | Available substitute variables include: |
| - | %CLIENT6IP - IPv6 address of the client running curl |
| - | %CLIENTIP - IPv4 address of the client running curl |
| - | %CURL - Path to the curl executable |
| - | %FTP2PORT - Port number of the FTP server 2 |
| - | %FTP6PORT - IPv6 port number of the FTP server |
| - | %FTPPORT - Port number of the FTP server |
| - | %FTPSPORT - Port number of the FTPS server |
| - | %FTPTIME2 - Timeout in seconds that should be just sufficient to receive |
| - | a response from the test FTP server |
| - | %FTPTIME3 - Even longer than %FTPTIME2 |
| - | %GOPHER6PORT - IPv6 port number of the Gopher server |
| - | %GOPHERPORT - Port number of the Gopher server |
| - | %HOST6IP - IPv6 address of the host running this test |
| - | %HOSTIP - IPv4 address of the host running this test |
| - | %HTTP6PORT - IPv6 port number of the HTTP server |
| - | %HTTPUNIXPATH - Path to the Unix socket of the HTTP server |
| - | %HTTPPORT - Port number of the HTTP server |
| - | %HTTPSPORT - Port number of the HTTPS server |
| - | %HTTPTLS6PORT - IPv6 port number of the HTTP TLS server |
| - | %HTTPTLSPORT - Port number of the HTTP TLS server |
| - | %IMAP6PORT - IPv6 port number of the IMAP server |
| - | %IMAPPORT - Port number of the IMAP server |
| - | %POP36PORT - IPv6 port number of the POP3 server |
| - | %POP3PORT - Port number of the POP3 server |
| - | %PROXYPORT - Port number of the HTTP proxy |
| - | %PWD - Current directory |
| - | %POSIX_PWD - Current directory somewhat mingw friendly |
| - | %FILE_PWD - Current directory, on windows prefixed with a slash |
| - | %RTSP6PORT - IPv6 port number of the RTSP server |
| - | %RTSPPORT - Port number of the RTSP server |
| - | %SSHSRVMD5 - MD5 of SSH server's public key |
| - | %SMTP6PORT - IPv6 port number of the SMTP server |
| - | %SMTPPORT - Port number of the SMTP server |
| - | %SOCKSPORT - Port number of the SOCKS4/5 server |
| - | %SRCDIR - Full path to the source dir |
| - | %SSHPORT - Port number of the SCP/SFTP server |
| - | %TFTP6PORT - IPv6 port number of the TFTP server |
| - | %TFTPPORT - Port number of the TFTP server |
| - | %USER - Login ID of the user running the test |
| - | </command> |
| - | |
| - | <file name="log/filename"> |
| - | This creates the named file with this content before the test case is run, |
| - | which is useful if the test case needs a file to act on. |
| - | Variables are substituted on the contents of the file as in the <command> |
| - | section. |
| - | </file> |
| - | |
| - | <stdin [nonewline="yes"]> |
| - | Pass this given data on stdin to the tool. |
| - | |
| - | If 'nonewline' is set, we will cut off the trailing newline of this given data |
| - | before comparing with the one actually received by the client |
| - | </stdin> |
| - | |
| - | </client> |
| - | |
| - | <verify> |
| - | <errorcode> |
| - | numerical error code curl is supposed to return. Specify a list of accepted |
| - | error codes by separating multiple numbers with comma. See test 237 for an |
| - | example. |
| - | </errorcode> |
| - | <strip> |
| - | One regex per line that is removed from the protocol dumps before the |
| - | comparison is made. This is very useful to remove dependencies on dynamically |
| - | changing protocol data such as port numbers or user-agent strings. |
| - | </strip> |
| - | <strippart> |
| - | One perl op per line that operates on the protocol dump. This is pretty |
| - | advanced. Example: "s/^EPRT .*/EPRT stripped/" |
| - | </strippart> |
| - | |
| - | <protocol [nonewline="yes"]> |
| - | |
| - | the protocol dump curl should transmit, if 'nonewline' is set, we will cut off |
| - | the trailing newline of this given data before comparing with the one actually |
| - | sent by the client Variables are substituted as in the <command> section. The |
| - | <strip> and <strippart> rules are applied before comparisons are made. |
| - | |
| - | </protocol> |
| - | |
| - | <proxy [nonewline="yes"]> |
| - | |
| - | The protocol dump curl should transmit to a HTTP proxy (when the http-proxy |
| - | server is used), if 'nonewline' is set, we will cut off the trailing newline |
| - | of this given data before comparing with the one actually sent by the client |
| - | Variables are substituted as in the <command> section. The <strip> and |
| - | <strippart> rules are applied before comparisons are made. |
| - | |
| - | </proxy> |
| - | |
| - | <stdout [mode="text"] [nonewline="yes"]> |
| - | This verifies that this data was passed to stdout. Variables are |
| - | substituted as in the <command> section. |
| - | |
| - | Use the mode="text" attribute if the output is in text mode on platforms that |
| - | have a text/binary difference. |
| - | |
| - | If 'nonewline' is set, we will cut off the trailing newline of this given data |
| - | before comparing with the one actually received by the client |
| - | </stdout> |
| - | <file name="log/filename" [mode="text"]> |
| - | The file's contents must be identical to this after the test is complete. |
| - | Use the mode="text" attribute if the output is in text mode on platforms that |
| - | have a text/binary difference. |
| - | Variables are substituted as in the <command> section. |
| - | </file> |
| - | <file1> |
| - | 1 to 4 can be appended to 'file' to compare more files. |
| - | </file1> |
| - | <file2> |
| - | </file2> |
| - | <file3> |
| - | </file3> |
| - | <file4> |
| - | </file4> |
| - | <stripfile> |
| - | One perl op per line that operates on the output file or stdout before being |
| - | compared with what is stored in the test file. This is pretty |
| - | advanced. Example: "s/^EPRT .*/EPRT stripped/" |
| - | </stripfile> |
| - | <stripfile1> |
| - | 1 to 4 can be appended to 'stripfile' to strip the corresponding <fileN> |
| - | content |
| - | </stripfile1> |
| - | <stripfile2> |
| - | </stripfile2> |
| - | <stripfile3> |
| - | </stripfile3> |
| - | <stripfile4> |
| - | </stripfile4> |
| - | <upload> |
| - | the contents of the upload data curl should have sent |
| - | </upload> |
| - | <valgrind> |
| - | disable - disables the valgrind log check for this test |
| - | </valgrind> |
| - | </verify> |
| - | |
| - | </testcase> |
| @@ -0,0 +1,468 @@ | |
| + | # curl test suite file format |
| + | |
| + | The curl test suite's file format is very simple and extensible, closely |
| + | resembling XML. All data for a single test case resides in a single ASCII |
| + | file. Labels mark the beginning and the end of all sections, and each label |
| + | must be written in its own line. Comments are either XML-style (enclosed with |
| + | `<!--` and `-->`) or shell script style (beginning with `#`) and must appear |
| + | on their own lines and not alongside actual test data. Most test data files |
| + | are syntactically valid XML, although a few files are not (lack of support for |
| + | character entities and the preservation of CR/LF characters at the end of |
| + | lines are the biggest differences). |
| + | |
| + | Each test case exists as a file matching the format `tests/data/testNUM`, |
| + | where NUM is considered the unique test number. |
| + | |
| + | The file begins with a 'testcase' tag, which encompasses the remainder of the |
| + | file. |
| + | |
| + | # `<testcase>` |
| + | |
| + | Each test is always within the testcase tag. Each test case is split up in |
| + | four main sections: `info`, `reply`, `client` and `verify`. |
| + | |
| + | - **info** provides information about the test case |
| + | |
| + | - **reply** is used for the server to know what to send as a reply for the |
| + | requests curl sends |
| + | |
| + | - **client** defines how the client should behave |
| + | |
| + | - **verify** defines how to verify that the data stored after a command has |
| + | been run ended up correctly |
| + | |
| + | Each main section has a number of available subsections that can be specified, |
| + | that will be checked/used if specified. |
| + | |
| + | ## `<info>` |
| + | |
| + | ### `<keywords>` |
| + | A newline-separated list of keywords describing what this test case uses and |
| + | tests. Try to use an already used keyword. These keywords will be used for |
| + | statistical/informational purposes and for choosing or skipping classes |
| + | of tests. "Keywords" must begin with an alphabetic character, "-", "[" |
| + | or "{" and may actually consist of multiple words separated by spaces |
| + | which are treated together as a single identifier. |
| + | |
| + | ## `<reply>` |
| + | |
| + | ### `<data [nocheck="yes"] [sendzero="yes"] [base64="yes"] [hex="yes"]>` |
| + | |
| + | data to be sent to the client on its request and later verified that it |
| + | arrived safely. Set `nocheck="yes"` to prevent the test script from verifying |
| + | the arrival of this data. |
| + | |
| + | If the data contains `swsclose` anywhere within the start and end tag, and |
| + | this is a HTTP test, then the connection will be closed by the server after |
| + | this response is sent. If not, the connection will be kept persistent. |
| + | |
| + | If the data contains `swsbounce` anywhere within the start and end tag, the |
| + | HTTP server will detect if this is a second request using the same test and |
| + | part number and will then increase the part number with one. This is useful |
| + | for auth tests and similar. |
| + | |
| + | `sendzero=yes` means that the (FTP) server will "send" the data even if the |
| + | size is zero bytes. Used to verify curl's behaviour on zero bytes transfers. |
| + | |
| + | `base64=yes` means that the data provided in the test-file is a chunk of data |
| + | encoded with base64. It is the only way a test case can contain binary |
| + | data. (This attribute can in fact be used on any section, but it doesn't make |
| + | much sense for other sections than "data"). |
| + | |
| + | `hex=yes` means that the data is a sequence of hex pairs. It will get decoded |
| + | and used as "raw" data. |
| + | |
| + | For FTP file listings, the `<data>` section will be used *only* if you make |
| + | sure that there has been a CWD done first to a directory named `test-[num]` |
| + | where [num] is the test case number. Otherwise the ftp server can't know from |
| + | which test file to load the list content. |
| + | |
| + | ### `<dataNUM>` |
| + | |
| + | Send back this contents instead of the <data> one. The num is set by: |
| + | |
| + | - The test number in the request line is >10000 and this is the remainder |
| + | of [test case number]%10000. |
| + | - The request was HTTP and included digest details, which adds 1000 to NUM |
| + | - If a HTTP request is NTLM type-1, it adds 1001 to num |
| + | - If a HTTP request is NTLM type-3, it adds 1002 to num |
| + | - If a HTTP request is Basic and num is already >=1000, it adds 1 to num |
| + | - If a HTTP request is Negotiate, num gets incremented by one for each |
| + | request with Negotiate authorization header on the same test case. |
| + | |
| + | Dynamically changing num in this way allows the test harness to be used to |
| + | test authentication negotiation where several different requests must be sent |
| + | to complete a transfer. The response to each request is found in its own data |
| + | section. Validating the entire negotiation sequence can be done by specifying |
| + | a datacheck section. |
| + | |
| + | ### `<connect>` |
| + | The connect section is used instead of the 'data' for all CONNECT |
| + | requests. The remainder of the rules for the data section then apply but with |
| + | a connect prefix. |
| + | |
| + | ### `<datacheck [mode="text"] [nonewline="yes"]>` |
| + | if the data is sent but this is what should be checked afterwards. If |
| + | `nonewline=yes` is set, runtests will cut off the trailing newline from the |
| + | data before comparing with the one actually received by the client. |
| + | |
| + | Use the `mode="text"` attribute if the output is in text mode on platforms |
| + | that have a text/binary difference. |
| + | |
| + | ### `<datacheckNUM [nonewline="yes"] [mode="text"]>` |
| + | The contents of numbered datacheck sections are appended to the non-numbered |
| + | one. |
| + | |
| + | ### `<size>` |
| + | number to return on a ftp SIZE command (set to -1 to make this command fail) |
| + | |
| + | ### `<mdtm>` |
| + | what to send back if the client sends a (FTP) MDTM command, set to -1 to |
| + | have it return that the file doesn't exist |
| + | |
| + | ### `<postcmd>` |
| + | special purpose server-command to control its behavior *after* the |
| + | reply is sent |
| + | For HTTP/HTTPS, these are supported: |
| + | |
| + | `wait [secs]` - Pause for the given time |
| + | |
| + | ### `<servercmd>` |
| + | Special-commands for the server. |
| + | |
| + | #### For FTP/SMTP/POP/IMAP |
| + | |
| + | - `REPLY [command] [return value] [response string]` - Changes how the server |
| + | responds to the [command]. [response string] is evaluated as a perl string, |
| + | so it can contain embedded \r\n, for example. There's a special [command] |
| + | named "welcome" (without quotes) which is the string sent immediately on |
| + | connect as a welcome. |
| + | - `REPLYLF` (like above but sends the response terminated with LF-only and not |
| + | CRLF) |
| + | - `COUNT [command] [num]` - Do the `REPLY` change for `[command]` only `[num]` |
| + | times and then go back to the built-in approach |
| + | - `DELAY [command] [secs]` - Delay responding to this command for the given |
| + | time |
| + | - `RETRWEIRDO` - Enable the "weirdo" RETR case when multiple response lines |
| + | appear at once when a file is transferred |
| + | - `RETRNOSIZE` - Make sure the RETR response doesn't contain the size of the |
| + | file |
| + | - `NOSAVE` - Don't actually save what is received |
| + | - `SLOWDOWN` - Send FTP responses with 0.01 sec delay between each byte |
| + | - `PASVBADIP` - makes PASV send back an illegal IP in its 227 response |
| + | - `CAPA [capabilities]` - Enables support for and specifies a list of space |
| + | separated capabilities to return to the client for the IMAP `CAPABILITY`, |
| + | POP3 `CAPA` and SMTP `EHLO` commands |
| + | - `AUTH [mechanisms]` - Enables support for SASL authentication and specifies |
| + | a list of space separated mechanisms for IMAP, POP3 and SMTP |
| + | |
| + | #### For HTTP/HTTPS |
| + | |
| + | - `auth_required` if this is set and a POST/PUT is made without auth, the |
| + | server will NOT wait for the full request body to get sent |
| + | - `idle` - do nothing after receiving the request, just "sit idle" |
| + | - `stream` - continuously send data to the client, never-ending |
| + | - `writedelay: [secs]` delay this amount between reply packets |
| + | - `skip: [num]` - instructs the server to ignore reading this many bytes from |
| + | a PUT or POST request |
| + | - `rtp: part [num] channel [num] size [num]` - stream a fake RTP packet for |
| + | the given part on a chosen channel with the given payload size |
| + | - `connection-monitor` - When used, this will log `[DISCONNECT]` to the |
| + | `server.input` log when the connection is disconnected. |
| + | - `upgrade` - when an HTTP upgrade header is found, the server will upgrade to |
| + | http2 |
| + | - `swsclose` - instruct server to close connection after response |
| + | - `no-expect` - don't read the request body if Expect: is present |
| + | |
| + | #### For TFTP |
| + | `writedelay: [secs]` delay this amount between reply packets (each packet |
| + | being 512 bytes payload) |
| + | |
| + | ## `<client>` |
| + | |
| + | ### `<server>` |
| + | What server(s) this test case requires/uses. Available servers: |
| + | |
| + | - `file` |
| + | - `ftp-ipv6` |
| + | - `ftp` |
| + | - `ftps` |
| + | - `http-ipv6` |
| + | - `http-proxy` |
| + | - `http-unix` |
| + | - `http/2` |
| + | - `http` |
| + | - `https` |
| + | - `httptls+srp-ipv6` |
| + | - `httptls+srp` |
| + | - `imap` |
| + | - `mqtt` |
| + | - `none` |
| + | - `pop3` |
| + | - `rtsp-ipv6` |
| + | - `rtsp` |
| + | - `scp` |
| + | - `sftp` |
| + | - `smtp` |
| + | - `socks4` |
| + | - `socks5` |
| + | |
| + | Give only one per line. This subsection is mandatory. |
| + | |
| + | ### `<features>` |
| + | A list of features that MUST be present in the client/library for this test to |
| + | be able to run. If a required feature is not present then the test will be |
| + | SKIPPED. |
| + | |
| + | Alternatively a feature can be prefixed with an exclamation mark to indicate a |
| + | feature is NOT required. If the feature is present then the test will be |
| + | SKIPPED. |
| + | |
| + | Features testable here are: |
| + | |
| + | - `alt-svc` |
| + | - `crypto` |
| + | - `debug` |
| + | - `getrlimit` |
| + | - `GnuTLS` |
| + | - `GSS-API` |
| + | - `http/2` |
| + | - `idn` |
| + | - `ipv6` |
| + | - `Kerberos` |
| + | - `large_file` |
| + | - `ld_preload` |
| + | - `libz` |
| + | - `manual` |
| + | - `Metalink` |
| + | - `NSS` |
| + | - `NTLM` |
| + | - `OpenSSL` |
| + | - `PSL` |
| + | - `socks` |
| + | - `SPNEGO` |
| + | - `SSL` |
| + | - `SSLpinning` |
| + | - `SSPI` |
| + | - `threaded-resolver` |
| + | - `TLS-SRP` |
| + | - `TrackMemory` |
| + | - `unittest` |
| + | - `unix-sockets` |
| + | - `win32` |
| + | - `WinSSL` |
| + | |
| + | as well as each protocol that curl supports. A protocol only needs to be |
| + | specified if it is different from the server (useful when the server |
| + | is `none`). |
| + | |
| + | ### `<killserver>` |
| + | Using the same syntax as in `<server>` but when mentioned here these servers |
| + | are explicitly KILLED when this test case is completed. Only use this if there |
| + | is no other alternatives. Using this of course requires subsequent tests to |
| + | restart servers. |
| + | |
| + | ### `<precheck>` |
| + | A command line that if set gets run by the test script before the test. If an |
| + | output is displayed by the command or if the return code is non-zero, the test |
| + | will be skipped and the (single-line) output will be displayed as reason for |
| + | not running the test. Variables are substituted as in the `<command>` |
| + | section. |
| + | |
| + | ### `<postcheck>` |
| + | A command line that if set gets run by the test script after the test. If |
| + | the command exists with a non-zero status code, the test will be considered |
| + | to have failed. Variables are substituted as in the `<command>` section. |
| + | |
| + | ### `<tool>` |
| + | Name of tool to invoke instead of "curl". This tool must be built and exist |
| + | either in the libtest/ directory (if the tool name starts with 'lib') or in |
| + | the unit/ directory (if the tool name starts with 'unit'). |
| + | |
| + | ### `<name>` |
| + | Brief test case description, shown when the test runs. |
| + | |
| + | ### `<setenv>` |
| + | variable1=contents1 |
| + | variable2=contents2 |
| + | |
| + | Set the given environment variables to the specified value before the actual |
| + | command is run. They are cleared again after the command has been run. |
| + | Variables are first substituted as in the `<command>` section. |
| + | ### `<command [option="no-output/no-include/force-output/binary-trace"] [timeout="secs"][delay="secs"][type="perl"]>` |
| + | Command line to run. There's a bunch of %variables that get replaced |
| + | accordingly. |
| + | |
| + | Note that the URL that gets passed to the server actually controls what data |
| + | that is returned. The last slash in the URL must be followed by a number. That |
| + | number (N) will be used by the test-server to load test case N and return the |
| + | data that is defined within the `<reply><data></data></reply>` section. |
| + | |
| + | If there's no test number found above, the HTTP test server will use the |
| + | number following the last dot in the given hostname (made so that a CONNECT |
| + | can still pass on test number) so that "foo.bar.123" gets treated as test case |
| + | 123. Alternatively, if an IPv6 address is provided to CONNECT, the last |
| + | hexadecimal group in the address will be used as the test number! For example |
| + | the address "[1234::ff]" would be treated as test case 255. |
| + | |
| + | Set `type="perl"` to write the test case as a perl script. It implies that |
| + | there's no memory debugging and valgrind gets shut off for this test. |
| + | |
| + | Set `option="no-output"` to prevent the test script to slap on the `--output` |
| + | argument that directs the output to a file. The `--output` is also not added |
| + | if the verify/stdout section is used. |
| + | |
| + | Set `option="force-output"` to make use of `--output` even when the test is |
| + | otherwise written to verify stdout. |
| + | |
| + | Set `option="no-include"` to prevent the test script to slap on the |
| + | `--include` argument. |
| + | |
| + | Set `option="binary-trace"` to use `--trace` instead of `--trace-ascii` for |
| + | tracing. Suitable for binary-oriented protocols such as MQTT. |
| + | |
| + | Set `timeout="secs"` to override default server logs advisor read lock |
| + | timeout. This timeout is used by the test harness, once that the command has |
| + | completed execution, to wait for the test server to write out server side log |
| + | files and remove the lock that advised not to read them. The "secs" parameter |
| + | is the not negative integer number of seconds for the timeout. This `timeout` |
| + | attribute is documented for completeness sake, but is deep test harness stuff |
| + | and only needed for very singular and specific test cases. Avoid using it. |
| + | |
| + | Set `delay="secs"` to introduce a time delay once that the command has |
| + | completed execution and before the `<postcheck>` section runs. The "secs" |
| + | parameter is the not negative integer number of seconds for the delay. This |
| + | 'delay' attribute is intended for very specific test cases, and normally not |
| + | needed. |
| + | |
| + | Available substitute variables include: |
| + | |
| + | - `%CLIENT6IP` - IPv6 address of the client running curl |
| + | - `%CLIENTIP` - IPv4 address of the client running curl |
| + | - `%CURL` - Path to the curl executable |
| + | - `%FILE_PWD` - Current directory, on windows prefixed with a slash |
| + | - `%FTP2PORT` - Port number of the FTP server 2 |
| + | - `%FTP6PORT` - IPv6 port number of the FTP server |
| + | - `%FTPPORT` - Port number of the FTP server |
| + | - `%FTPSPORT` - Port number of the FTPS server |
| + | - `%FTPTIME2` - Timeout in seconds that should be just sufficient to receive a response from the test FTP server |
| + | - `%FTPTIME3` - Even longer than %FTPTIME2 |
| + | - `%GOPHER6PORT` - IPv6 port number of the Gopher server |
| + | - `%GOPHERPORT` - Port number of the Gopher server |
| + | - `%HOST6IP` - IPv6 address of the host running this test |
| + | - `%HOSTIP` - IPv4 address of the host running this test |
| + | - `%HTTP6PORT` - IPv6 port number of the HTTP server |
| + | - `%HTTPPORT` - Port number of the HTTP server |
| + | - `%HTTPSPORT` - Port number of the HTTPS server |
| + | - `%HTTPTLS6PORT` - IPv6 port number of the HTTP TLS server |
| + | - `%HTTPTLSPORT` - Port number of the HTTP TLS server |
| + | - `%HTTPUNIXPATH` - Path to the Unix socket of the HTTP server |
| + | - `%IMAP6PORT` - IPv6 port number of the IMAP server |
| + | - `%IMAPPORT` - Port number of the IMAP server |
| + | - `%MQTTPORT` - Port number of the MQTT server |
| + | - `%NEGTELNETPORT` - Port number of the telnet server |
| + | - `%POP36PORT` - IPv6 port number of the POP3 server |
| + | - `%POP3PORT` - Port number of the POP3 server |
| + | - `%POSIX_PWD` - Current directory somewhat mingw friendly |
| + | - `%PROXYPORT` - Port number of the HTTP proxy |
| + | - `%PWD` - Current directory |
| + | - `%RTSP6PORT` - IPv6 port number of the RTSP server |
| + | - `%RTSPPORT` - Port number of the RTSP server |
| + | - `%SMBPORT` - Port number of the SMB server |
| + | - `%SMBSPORT` - Port number of the SMBS server |
| + | - `%SMTP6PORT` - IPv6 port number of the SMTP server |
| + | - `%SMTPPORT` - Port number of the SMTP server |
| + | - `%SOCKSPORT` - Port number of the SOCKS4/5 server |
| + | - `%SRCDIR` - Full path to the source dir |
| + | - `%SSHPORT` - Port number of the SCP/SFTP server |
| + | - `%SSHSRVMD5` - MD5 of SSH server's public key |
| + | - `%TFTP6PORT` - IPv6 port number of the TFTP server |
| + | - `%TFTPPORT` - Port number of the TFTP server |
| + | - `%USER` - Login ID of the user running the test |
| + | |
| + | ### `<file name="log/filename">` |
| + | This creates the named file with this content before the test case is run, |
| + | which is useful if the test case needs a file to act on. Variables are |
| + | substituted on the contents of the file as in the `<command>` section. |
| + | |
| + | ### `<stdin [nonewline="yes"]>` |
| + | Pass this given data on stdin to the tool. |
| + | |
| + | If 'nonewline' is set, we will cut off the trailing newline of this given data |
| + | before comparing with the one actually received by the client |
| + | |
| + | ## `<verify>` |
| + | ### `<errorcode>` |
| + | numerical error code curl is supposed to return. Specify a list of accepted |
| + | error codes by separating multiple numbers with comma. See test 237 for an |
| + | example. |
| + | |
| + | ### `<strip>` |
| + | One regex per line that is removed from the protocol dumps before the |
| + | comparison is made. This is very useful to remove dependencies on dynamically |
| + | changing protocol data such as port numbers or user-agent strings. |
| + | |
| + | ### `<strippart>` |
| + | One perl op per line that operates on the protocol dump. This is pretty |
| + | advanced. Example: `s/^EPRT .*/EPRT stripped/`. |
| + | |
| + | ### `<protocol [nonewline="yes"]>` |
| + | |
| + | the protocol dump curl should transmit, if 'nonewline' is set, we will cut off |
| + | the trailing newline of this given data before comparing with the one actually |
| + | sent by the client Variables are substituted as in the `<command>` section. |
| + | The `<strip>` and `<strippart>` rules are applied before comparisons are made. |
| + | |
| + | ### `<proxy [nonewline="yes"]>` |
| + | |
| + | The protocol dump curl should transmit to a HTTP proxy (when the http-proxy |
| + | server is used), if 'nonewline' is set, we will cut off the trailing newline |
| + | of this given data before comparing with the one actually sent by the client |
| + | Variables are substituted as in the `<command>` section. The `<strip>` and |
| + | `<strippart>` rules are applied before comparisons are made. |
| + | |
| + | ### `<stdout [mode="text"] [nonewline="yes"]>` |
| + | This verifies that this data was passed to stdout. Variables are |
| + | substituted as in the `<command>` section. |
| + | |
| + | Use the mode="text" attribute if the output is in text mode on platforms that |
| + | have a text/binary difference. |
| + | |
| + | If 'nonewline' is set, we will cut off the trailing newline of this given data |
| + | before comparing with the one actually received by the client |
| + | |
| + | ### `<file name="log/filename" [mode="text"]>` |
| + | The file's contents must be identical to this after the test is complete. Use |
| + | the mode="text" attribute if the output is in text mode on platforms that have |
| + | a text/binary difference. Variables are substituted as in the `<command>` |
| + | section. |
| + | |
| + | ### `<file1>` |
| + | 1 to 4 can be appended to 'file' to compare more files. |
| + | |
| + | ### `<file2>` |
| + | |
| + | ### `<file3>` |
| + | |
| + | ### `<file4>` |
| + | |
| + | ### `<stripfile>` |
| + | One perl op per line that operates on the output file or stdout before being |
| + | compared with what is stored in the test file. This is pretty |
| + | advanced. Example: "s/^EPRT .*/EPRT stripped/" |
| + | |
| + | ### `<stripfile1>` |
| + | 1 to 4 can be appended to 'stripfile' to strip the corresponding <fileN> |
| + | content |
| + | |
| + | ### `<stripfile2>` |
| + | |
| + | ### `<stripfile3>` |
| + | |
| + | ### `<stripfile4>` |
| + | |
| + | ### `<upload>` |
| + | the contents of the upload data curl should have sent |
| + | |
| + | ### `<valgrind>` |
| + | disable - disables the valgrind log check for this test |
| @@ -25,7 +25,7 @@ PDFPAGES = testcurl.pdf runtests.pdf | |
| MANDISTPAGES = runtests.1.dist testcurl.1.dist | |
| EXTRA_DIST = ftpserver.pl httpserver.pl secureserver.pl runtests.pl \ | |
| - | getpart.pm FILEFORMAT README stunnel.pem memanalyze.pl testcurl.pl \ |
| + | getpart.pm FILEFORMAT.md README stunnel.pem memanalyze.pl testcurl.pl \ |
| valgrind.pm ftp.pm sshserver.pl sshhelp.pm pathhelp.pm testcurl.1 runtests.1 \ | |
| serverhelp.pm tftpserver.pl rtspserver.pl directories.pm symbol-scan.pl \ | |
| CMakeLists.txt mem-include-scan.pl valgrind.supp extern-scan.pl \ | |
| @@ -72,35 +72,15 @@ The curl Test Suite | |
| 1.2 Port numbers used by test servers | |
| - | - TCP/8990 for HTTP |
| - | - TCP/8991 for HTTPS |
| - | - TCP/8992 for FTP |
| - | - TCP/8993 for FTPS |
| - | - TCP/8994 for HTTP IPv6 |
| - | - TCP/8995 for FTP (2) |
| - | - TCP/8996 for FTP IPv6 |
| - | - UDP/8997 for TFTP |
| - | - UDP/8998 for TFTP IPv6 |
| - | - TCP/8999 for SCP/SFTP |
| - | - TCP/9000 for SOCKS |
| - | - TCP/9001 for POP3 |
| - | - TCP/9002 for POP3 IPv6 |
| - | - TCP/9003 for IMAP |
| - | - TCP/9004 for IMAP IPv6 |
| - | - TCP/9005 for SMTP |
| - | - TCP/9006 for SMTP IPv6 |
| - | - TCP/9007 for RTSP |
| - | - TCP/9008 for RTSP IPv6 |
| - | - TCP/9009 for GOPHER |
| - | - TCP/9010 for GOPHER IPv6 |
| - | - TCP/9011 for HTTPS server with TLS-SRP support |
| - | - TCP/9012 for HTTPS IPv6 server with TLS-SRP support |
| - | - TCP/9013 for HTTP proxy server for CONNECT |
| - | - TCP/9014 for HTTP/2 server |
| - | - TCP/9015 for DICT server |
| - | - TCP/9016 for SMB server |
| - | - TCP/9017 for SMBS server (reserved) |
| - | - TCP/9018 for TELNET server with negotiation support |
| + | Tests are written to use as few fixed fixed port numbers as possible and all |
| + | tests should be written to use suitable variables instead of port numbers so |
| + | that test cases continue to work independent on what port numbers the test |
| + | servers actually use. |
| + | |
| + | The remaining fixed-port test servers that are still used, use the port |
| + | range 8890 - 8904 by default, but can be moved with runtests' -b option. |
| + | |
| + | See the FILEFORMAT for a listing of existing port number variables. |
| 1.3 Test servers | |