tests: provide docs a as curldown, not nroff
—
$ git checkout -f 8f89218b19338febcf979eb13cc26d03aaf9d671
Previous HEAD position was 58946eed20 dist: add missing `FindNettle.cmake`
HEAD is now at 8f89218b19 tests: provide docs a as curldown, not nroff
$ git clean -fdx
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing curl-config
Removing depcomp
Removing docs/Makefile
Removing docs/Makefile.in
Removing docs/cmdline-opts/Makefile
Removing docs/cmdline-opts/Makefile.in
Removing docs/examples/.deps/
Removing docs/examples/Makefile
Removing docs/examples/Makefile.in
Removing docs/libcurl/Makefile
Removing docs/libcurl/Makefile.in
Removing docs/libcurl/opts/Makefile
Removing docs/libcurl/opts/Makefile.in
Removing include/Makefile
Removing include/Makefile.in
Removing include/curl/Makefile
Removing include/curl/Makefile.in
Removing install-sh
Removing lib/.deps/
Removing lib/.dirstamp
Removing lib/.libs/
Removing lib/Makefile
Removing lib/Makefile.in
Removing lib/base64.o
Removing lib/curl_config.h
Removing lib/curl_config.h.in
Removing lib/curl_multibyte.o
Removing lib/dynbuf.o
Removing lib/libcurl.la
Removing lib/libcurl.vers
Removing lib/libcurl_la-altsvc.lo
Removing lib/libcurl_la-altsvc.o
Removing lib/libcurl_la-amigaos.lo
Removing lib/libcurl_la-amigaos.o
Removing lib/libcurl_la-asyn-ares.lo
Removing lib/libcurl_la-asyn-ares.o
Removing lib/libcurl_la-asyn-thread.lo
Removing lib/libcurl_la-asyn-thread.o
Removing lib/libcurl_la-base64.lo
Removing lib/libcurl_la-base64.o
Removing lib/libcurl_la-bufq.lo
Removing lib/libcurl_la-bufq.o
Removing lib/libcurl_la-bufref.lo
Removing lib/libcurl_la-bufref.o
Removing lib/libcurl_la-c-hyper.lo
Removing lib/libcurl_la-c-hyper.o
Removing lib/libcurl_la-cf-h1-proxy.lo
Removing lib/libcurl_la-cf-h1-proxy.o
Removing lib/libcurl_la-cf-h2-proxy.lo
Removing lib/libcurl_la-cf-h2-proxy.o
Removing lib/libcurl_la-cf-haproxy.lo
Removing lib/libcurl_la-cf-haproxy.o
Removing lib/libcurl_la-cf-https-connect.lo
Removing lib/libcurl_la-cf-https-connect.o
Removing lib/libcurl_la-cf-socket.lo
Removing lib/libcurl_la-cf-socket.o
Removing lib/libcurl_la-cfilters.lo
Removing lib/libcurl_la-cfilters.o
Removing lib/libcurl_la-conncache.lo
Removing lib/libcurl_la-conncache.o
Removing lib/libcurl_la-connect.lo
Removing lib/libcurl_la-connect.o
Removing lib/libcurl_la-content_encoding.lo
Removing lib/libcurl_la-content_encoding.o
Removing lib/libcurl_la-cookie.lo
Removing lib/libcurl_la-cookie.o
Removing lib/libcurl_la-curl_addrinfo.lo
Removing lib/libcurl_la-curl_addrinfo.o
Removing lib/libcurl_la-curl_des.lo
Removing lib/libcurl_la-curl_des.o
Removing lib/libcurl_la-curl_endian.lo
Removing lib/libcurl_la-curl_endian.o
Removing lib/libcurl_la-curl_fnmatch.lo
Removing lib/libcurl_la-curl_fnmatch.o
Removing lib/libcurl_la-curl_get_line.lo
Removing lib/libcurl_la-curl_get_line.o
Removing lib/libcurl_la-curl_gethostname.lo
Removing lib/libcurl_la-curl_gethostname.o
Removing lib/libcurl_la-curl_gssapi.lo
Removing lib/libcurl_la-curl_gssapi.o
Removing lib/libcurl_la-curl_memrchr.lo
Removing lib/libcurl_la-curl_memrchr.o
Removing lib/libcurl_la-curl_multibyte.lo
Removing lib/libcurl_la-curl_multibyte.o
Removing lib/libcurl_la-curl_ntlm_core.lo
Removing lib/libcurl_la-curl_ntlm_core.o
Removing lib/libcurl_la-curl_path.lo
Removing lib/libcurl_la-curl_path.o
Removing lib/libcurl_la-curl_range.lo
Removing lib/libcurl_la-curl_range.o
Removing lib/libcurl_la-curl_rtmp.lo
Removing lib/libcurl_la-curl_rtmp.o
Removing lib/libcurl_la-curl_sasl.lo
Removing lib/libcurl_la-curl_sasl.o
Removing lib/libcurl_la-curl_sha512_256.lo
Removing lib/libcurl_la-curl_sha512_256.o
Removing lib/libcurl_la-curl_sspi.lo
Removing lib/libcurl_la-curl_sspi.o
Removing lib/libcurl_la-curl_threads.lo
Removing lib/libcurl_la-curl_threads.o
Removing lib/libcurl_la-curl_trc.lo
Removing lib/libcurl_la-curl_trc.o
Removing lib/libcurl_la-cw-out.lo
Removing lib/libcurl_la-cw-out.o
Removing lib/libcurl_la-dict.lo
Removing lib/libcurl_la-dict.o
Removing lib/libcurl_la-dllmain.lo
Removing lib/libcurl_la-dllmain.o
Removing lib/libcurl_la-doh.lo
Removing lib/libcurl_la-doh.o
Removing lib/libcurl_la-dynbuf.lo
Removing lib/libcurl_la-dynbuf.o
Removing lib/libcurl_la-dynhds.lo
Removing lib/libcurl_la-dynhds.o
Removing lib/libcurl_la-easy.lo
Removing lib/libcurl_la-easy.o
Removing lib/libcurl_la-easygetopt.lo
Removing lib/libcurl_la-easygetopt.o
Removing lib/libcurl_la-easyoptions.lo
Removing lib/libcurl_la-easyoptions.o
Removing lib/libcurl_la-escape.lo
Removing lib/libcurl_la-escape.o
Removing lib/libcurl_la-file.lo
Removing lib/libcurl_la-file.o
Removing lib/libcurl_la-fileinfo.lo
Removing lib/libcurl_la-fileinfo.o
Removing lib/libcurl_la-fopen.lo
Removing lib/libcurl_la-fopen.o
Removing lib/libcurl_la-formdata.lo
Removing lib/libcurl_la-formdata.o
Removing lib/libcurl_la-ftp.lo
Removing lib/libcurl_la-ftp.o
Removing lib/libcurl_la-ftplistparser.lo
Removing lib/libcurl_la-ftplistparser.o
Removing lib/libcurl_la-getenv.lo
Removing lib/libcurl_la-getenv.o
Removing lib/libcurl_la-getinfo.lo
Removing lib/libcurl_la-getinfo.o
Removing lib/libcurl_la-gopher.lo
Removing lib/libcurl_la-gopher.o
Removing lib/libcurl_la-hash.lo
Removing lib/libcurl_la-hash.o
Removing lib/libcurl_la-headers.lo
Removing lib/libcurl_la-headers.o
Removing lib/libcurl_la-hmac.lo
Removing lib/libcurl_la-hmac.o
Removing lib/libcurl_la-hostasyn.lo
Removing lib/libcurl_la-hostasyn.o
Removing lib/libcurl_la-hostip.lo
Removing lib/libcurl_la-hostip.o
Removing lib/libcurl_la-hostip4.lo
Removing lib/libcurl_la-hostip4.o
Removing lib/libcurl_la-hostip6.lo
Removing lib/libcurl_la-hostip6.o
Removing lib/libcurl_la-hostsyn.lo
Removing lib/libcurl_la-hostsyn.o
Removing lib/libcurl_la-hsts.lo
Removing lib/libcurl_la-hsts.o
Removing lib/libcurl_la-http.lo
Removing lib/libcurl_la-http.o
Removing lib/libcurl_la-http1.lo
Removing lib/libcurl_la-http1.o
Removing lib/libcurl_la-http2.lo
Removing lib/libcurl_la-http2.o
Removing lib/libcurl_la-http_aws_sigv4.lo
Removing lib/libcurl_la-http_aws_sigv4.o
Removing lib/libcurl_la-http_chunks.lo
Removing lib/libcurl_la-http_chunks.o
Removing lib/libcurl_la-http_digest.lo
Removing lib/libcurl_la-http_digest.o
Removing lib/libcurl_la-http_negotiate.lo
Removing lib/libcurl_la-http_negotiate.o
Removing lib/libcurl_la-http_ntlm.lo
Removing lib/libcurl_la-http_ntlm.o
Removing lib/libcurl_la-http_proxy.lo
Removing lib/libcurl_la-http_proxy.o
Removing lib/libcurl_la-idn.lo
Removing lib/libcurl_la-idn.o
Removing lib/libcurl_la-if2ip.lo
Removing lib/libcurl_la-if2ip.o
Removing lib/libcurl_la-imap.lo
Removing lib/libcurl_la-imap.o
Removing lib/libcurl_la-inet_ntop.lo
Removing lib/libcurl_la-inet_ntop.o
Removing lib/libcurl_la-inet_pton.lo
Removing lib/libcurl_la-inet_pton.o
Removing lib/libcurl_la-krb5.lo
Removing lib/libcurl_la-krb5.o
Removing lib/libcurl_la-ldap.lo
Removing lib/libcurl_la-ldap.o
Removing lib/libcurl_la-llist.lo
Removing lib/libcurl_la-llist.o
Removing lib/libcurl_la-macos.lo
Removing lib/libcurl_la-macos.o
Removing lib/libcurl_la-md4.lo
Removing lib/libcurl_la-md4.o
Removing lib/libcurl_la-md5.lo
Removing lib/libcurl_la-md5.o
Removing lib/libcurl_la-memdebug.lo
Removing lib/libcurl_la-memdebug.o
Removing lib/libcurl_la-mime.lo
Removing lib/libcurl_la-mime.o
Removing lib/libcurl_la-mprintf.lo
Removing lib/libcurl_la-mprintf.o
Removing lib/libcurl_la-mqtt.lo
Removing lib/libcurl_la-mqtt.o
Removing lib/libcurl_la-multi.lo
Removing lib/libcurl_la-multi.o
Removing lib/libcurl_la-netrc.lo
Removing lib/libcurl_la-netrc.o
Removing lib/libcurl_la-nonblock.lo
Removing lib/libcurl_la-nonblock.o
Removing lib/libcurl_la-noproxy.lo
Removing lib/libcurl_la-noproxy.o
Removing lib/libcurl_la-openldap.lo
Removing lib/libcurl_la-openldap.o
Removing lib/libcurl_la-parsedate.lo
Removing lib/libcurl_la-parsedate.o
Removing lib/libcurl_la-pingpong.lo
Removing lib/libcurl_la-pingpong.o
Removing lib/libcurl_la-pop3.lo
Removing lib/libcurl_la-pop3.o
Removing lib/libcurl_la-progress.lo
Removing lib/libcurl_la-progress.o
Removing lib/libcurl_la-psl.lo
Removing lib/libcurl_la-psl.o
Removing lib/libcurl_la-rand.lo
Removing lib/libcurl_la-rand.o
Removing lib/libcurl_la-rename.lo
Removing lib/libcurl_la-rename.o
Removing lib/libcurl_la-request.lo
Removing lib/libcurl_la-request.o
Removing lib/libcurl_la-rtsp.lo
Removing lib/libcurl_la-rtsp.o
Removing lib/libcurl_la-select.lo
Removing lib/libcurl_la-select.o
Removing lib/libcurl_la-sendf.lo
Removing lib/libcurl_la-sendf.o
Removing lib/libcurl_la-setopt.lo
Removing lib/libcurl_la-setopt.o
Removing lib/libcurl_la-sha256.lo
Removing lib/libcurl_la-sha256.o
Removing lib/libcurl_la-share.lo
Removing lib/libcurl_la-share.o
Removing lib/libcurl_la-slist.lo
Removing lib/libcurl_la-slist.o
Removing lib/libcurl_la-smb.lo
Removing lib/libcurl_la-smb.o
Removing lib/libcurl_la-smtp.lo
Removing lib/libcurl_la-smtp.o
Removing lib/libcurl_la-socketpair.lo
Removing lib/libcurl_la-socketpair.o
Removing lib/libcurl_la-socks.lo
Removing lib/libcurl_la-socks.o
Removing lib/libcurl_la-socks_gssapi.lo
Removing lib/libcurl_la-socks_gssapi.o
Removing lib/libcurl_la-socks_sspi.lo
Removing lib/libcurl_la-socks_sspi.o
Removing lib/libcurl_la-speedcheck.lo
Removing lib/libcurl_la-speedcheck.o
Removing lib/libcurl_la-splay.lo
Removing lib/libcurl_la-splay.o
Removing lib/libcurl_la-strcase.lo
Removing lib/libcurl_la-strcase.o
Removing lib/libcurl_la-strdup.lo
Removing lib/libcurl_la-strdup.o
Removing lib/libcurl_la-strerror.lo
Removing lib/libcurl_la-strerror.o
Removing lib/libcurl_la-strtok.lo
Removing lib/libcurl_la-strtok.o
Removing lib/libcurl_la-strtoofft.lo
Removing lib/libcurl_la-strtoofft.o
Removing lib/libcurl_la-system_win32.lo
Removing lib/libcurl_la-system_win32.o
Removing lib/libcurl_la-telnet.lo
Removing lib/libcurl_la-telnet.o
Removing lib/libcurl_la-tftp.lo
Removing lib/libcurl_la-tftp.o
Removing lib/libcurl_la-timediff.lo
Removing lib/libcurl_la-timediff.o
Removing lib/libcurl_la-timeval.lo
Removing lib/libcurl_la-timeval.o
Removing lib/libcurl_la-transfer.lo
Removing lib/libcurl_la-transfer.o
Removing lib/libcurl_la-url.lo
Removing lib/libcurl_la-url.o
Removing lib/libcurl_la-urlapi.lo
Removing lib/libcurl_la-urlapi.o
Removing lib/libcurl_la-version.lo
Removing lib/libcurl_la-version.o
Removing lib/libcurl_la-version_win32.lo
Removing lib/libcurl_la-version_win32.o
Removing lib/libcurl_la-warnless.lo
Removing lib/libcurl_la-warnless.o
Removing lib/libcurl_la-ws.lo
Removing lib/libcurl_la-ws.o
Removing lib/nonblock.o
Removing lib/stamp-h1
Removing lib/strtoofft.o
Removing lib/timediff.o
Removing lib/vauth/.deps/
Removing lib/vauth/.dirstamp
Removing lib/vauth/libcurl_la-cleartext.lo
Removing lib/vauth/libcurl_la-cleartext.o
Removing lib/vauth/libcurl_la-cram.lo
Removing lib/vauth/libcurl_la-cram.o
Removing lib/vauth/libcurl_la-digest.lo
Removing lib/vauth/libcurl_la-digest.o
Removing lib/vauth/libcurl_la-digest_sspi.lo
Removing lib/vauth/libcurl_la-digest_sspi.o
Removing lib/vauth/libcurl_la-gsasl.lo
Removing lib/vauth/libcurl_la-gsasl.o
Removing lib/vauth/libcurl_la-krb5_gssapi.lo
Removing lib/vauth/libcurl_la-krb5_gssapi.o
Removing lib/vauth/libcurl_la-krb5_sspi.lo
Removing lib/vauth/libcurl_la-krb5_sspi.o
Removing lib/vauth/libcurl_la-ntlm.lo
Removing lib/vauth/libcurl_la-ntlm.o
Removing lib/vauth/libcurl_la-ntlm_sspi.lo
Removing lib/vauth/libcurl_la-ntlm_sspi.o
Removing lib/vauth/libcurl_la-oauth2.lo
Removing lib/vauth/libcurl_la-oauth2.o
Removing lib/vauth/libcurl_la-spnego_gssapi.lo
Removing lib/vauth/libcurl_la-spnego_gssapi.o
Removing lib/vauth/libcurl_la-spnego_sspi.lo
Removing lib/vauth/libcurl_la-spnego_sspi.o
Removing lib/vauth/libcurl_la-vauth.lo
Removing lib/vauth/libcurl_la-vauth.o
Removing lib/version_win32.o
Removing lib/vquic/.deps/
Removing lib/vquic/.dirstamp
Removing lib/vquic/libcurl_la-curl_msh3.lo
Removing lib/vquic/libcurl_la-curl_msh3.o
Removing lib/vquic/libcurl_la-curl_ngtcp2.lo
Removing lib/vquic/libcurl_la-curl_ngtcp2.o
Removing lib/vquic/libcurl_la-curl_osslq.lo
Removing lib/vquic/libcurl_la-curl_osslq.o
Removing lib/vquic/libcurl_la-curl_quiche.lo
Removing lib/vquic/libcurl_la-curl_quiche.o
Removing lib/vquic/libcurl_la-vquic-tls.lo
Removing lib/vquic/libcurl_la-vquic-tls.o
Removing lib/vquic/libcurl_la-vquic.lo
Removing lib/vquic/libcurl_la-vquic.o
Removing lib/vssh/.deps/
Removing lib/vssh/.dirstamp
Removing lib/vssh/libcurl_la-libssh.lo
Removing lib/vssh/libcurl_la-libssh.o
Removing lib/vssh/libcurl_la-libssh2.lo
Removing lib/vssh/libcurl_la-libssh2.o
Removing lib/vssh/libcurl_la-wolfssh.lo
Removing lib/vssh/libcurl_la-wolfssh.o
Removing lib/vtls/.deps/
Removing lib/vtls/.dirstamp
Removing lib/vtls/libcurl_la-bearssl.lo
Removing lib/vtls/libcurl_la-bearssl.o
Removing lib/vtls/libcurl_la-cipher_suite.lo
Removing lib/vtls/libcurl_la-cipher_suite.o
Removing lib/vtls/libcurl_la-gtls.lo
Removing lib/vtls/libcurl_la-gtls.o
Removing lib/vtls/libcurl_la-hostcheck.lo
Removing lib/vtls/libcurl_la-hostcheck.o
Removing lib/vtls/libcurl_la-keylog.lo
Removing lib/vtls/libcurl_la-keylog.o
Removing lib/vtls/libcurl_la-mbedtls.lo
Removing lib/vtls/libcurl_la-mbedtls.o
Removing lib/vtls/libcurl_la-mbedtls_threadlock.lo
Removing lib/vtls/libcurl_la-mbedtls_threadlock.o
Removing lib/vtls/libcurl_la-openssl.lo
Removing lib/vtls/libcurl_la-openssl.o
Removing lib/vtls/libcurl_la-rustls.lo
Removing lib/vtls/libcurl_la-rustls.o
Removing lib/vtls/libcurl_la-schannel.lo
Removing lib/vtls/libcurl_la-schannel.o
Removing lib/vtls/libcurl_la-schannel_verify.lo
Removing lib/vtls/libcurl_la-schannel_verify.o
Removing lib/vtls/libcurl_la-sectransp.lo
Removing lib/vtls/libcurl_la-sectransp.o
Removing lib/vtls/libcurl_la-vtls.lo
Removing lib/vtls/libcurl_la-vtls.o
Removing lib/vtls/libcurl_la-wolfssl.lo
Removing lib/vtls/libcurl_la-wolfssl.o
Removing lib/vtls/libcurl_la-x509asn1.lo
Removing lib/vtls/libcurl_la-x509asn1.o
Removing lib/warnless.o
Removing libcurl.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing packages/Makefile
Removing packages/Makefile.in
Removing packages/vms/Makefile
Removing packages/vms/Makefile.in
Removing scripts/Makefile
Removing scripts/Makefile.in
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/curl
Removing src/slist_wc.o
Removing src/terminal.o
Removing src/tool_binmode.o
Removing src/tool_bname.o
Removing src/tool_cb_dbg.o
Removing src/tool_cb_hdr.o
Removing src/tool_cb_prg.o
Removing src/tool_cb_rea.o
Removing src/tool_cb_see.o
Removing src/tool_cb_soc.o
Removing src/tool_cb_wrt.o
Removing src/tool_cfgable.o
Removing src/tool_dirhie.o
Removing src/tool_doswin.o
Removing src/tool_easysrc.o
Removing src/tool_filetime.o
Removing src/tool_findfile.o
Removing src/tool_formparse.o
Removing src/tool_getparam.o
Removing src/tool_getpass.o
Removing src/tool_help.o
Removing src/tool_helpers.o
Removing src/tool_hugehelp.c
Removing src/tool_hugehelp.o
Removing src/tool_ipfs.o
Removing src/tool_libinfo.o
Removing src/tool_listhelp.o
Removing src/tool_main.o
Removing src/tool_msgs.o
Removing src/tool_operate.o
Removing src/tool_operhlp.o
Removing src/tool_paramhlp.o
Removing src/tool_parsecfg.o
Removing src/tool_progress.o
Removing src/tool_setopt.o
Removing src/tool_sleep.o
Removing src/tool_stderr.o
Removing src/tool_strdup.o
Removing src/tool_urlglob.o
Removing src/tool_util.o
Removing src/tool_vms.o
Removing src/tool_writeout.o
Removing src/tool_writeout_json.o
Removing src/tool_xattr.o
Removing src/var.o
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/certs/Makefile
Removing tests/certs/Makefile.in
Removing tests/certs/scripts/Makefile
Removing tests/certs/scripts/Makefile.in
Removing tests/config
Removing tests/configurehelp.pm
Removing tests/data/Makefile
Removing tests/data/Makefile.in
Removing tests/http/Makefile
Removing tests/http/Makefile.in
Removing tests/http/clients/.deps/
Removing tests/http/clients/Makefile
Removing tests/http/clients/Makefile.in
Removing tests/http/config.ini
Removing tests/libtest/.deps/
Removing tests/libtest/Makefile
Removing tests/libtest/Makefile.in
Removing tests/server/.deps/
Removing tests/server/Makefile
Removing tests/server/Makefile.in
Removing tests/unit/.deps/
Removing tests/unit/Makefile
Removing tests/unit/Makefile.in
$ autoreconf -fi
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Remember to add 'LT_INIT' to configure.ac.
configure.ac:125: installing './compile'
configure.ac:437: installing './config.guess'
configure.ac:437: installing './config.sub'
configure.ac:125: installing './install-sh'
configure.ac:131: installing './missing'
docs/examples/Makefile.am: installing './depcomp'
$ bash -c find . -name config.guess -exec cp /usr/share/misc/config.guess {} \;
$ bash -c find . -name config.sub -exec cp /usr/share/misc/config.sub {} \;
$ chmod +x configure
$ ./configure --disable-shared --without-ssl --disable-docs
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... ccache gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether ccache gcc accepts -g... yes
checking for ccache gcc option to enable C11 features... none needed
checking whether ccache gcc understands -c and -o together... yes
checking how to run the C preprocessor... ccache gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of ccache gcc... gcc3
checking curl version... 8.10.0-DEV
checking for httpd... no
checking for apache2... no
checking for apachectl... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for nghttpx... no
checking for caddy... /usr/bin/caddy
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defined... no
checking if _THREAD_SAFE is actually needed... no
checking if _THREAD_SAFE is onwards defined... no
checking if _REENTRANT is already defined... no
checking if _REENTRANT is actually needed... no
checking if _REENTRANT is onwards defined... no
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking how to print strings... printf
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for fgrep... /usr/bin/grep -F
checking for ld used by ccache gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from ccache gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking for dlfcn.h... yes
checking for objdir... .libs
checking if ccache gcc supports -fno-rtti -fno-exceptions... no
checking for ccache gcc option to produce PIC... -fPIC -DPIC
checking if ccache gcc PIC flag -fPIC -DPIC works... yes
checking if ccache gcc static flag -static works... yes
checking if ccache gcc supports -c -o file.o... yes
checking if ccache gcc supports -c -o file.o... (cached) yes
checking whether the ccache gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether to build shared libraries with -version-info... yes
checking whether to build shared libraries with -no-undefined... no
checking whether to build shared libraries with -mimpure-text... no
checking whether to build shared libraries with PIC... yes
checking whether to build static libraries with PIC... yes
checking whether to build shared libraries only... no
checking whether to build static libraries only... yes
checking for windres... no
checking if cpp -P is needed... yes
checking if cpp -P works... yes
checking if compiler is DEC/Compaq/HP C... no
checking if compiler is HP-UX C... no
checking if compiler is IBM C... no
checking if compiler is Intel C... no
checking if compiler is clang... no
checking if compiler is GNU C... yes
checking compiler version... gcc '1100' (raw: '11')
checking if compiler is SunPro C... no
checking if compiler is Tiny C... no
checking whether build target is a native Windows one... no
checking if compiler accepts some basic options... yes
configure: compiler options added: -Werror-implicit-function-declaration
checking if compiler optimizer assumed setting might be used... yes
checking if compiler accepts optimizer enabling options... yes
configure: compiler options added: -O2
checking if compiler accepts strict warning options... yes
configure: compiler options added: -Wno-system-headers
checking if compiler halts on compilation errors... yes
checking if compiler halts on negative sized arrays... yes
checking if compiler halts on function prototype mismatch... yes
checking if compiler supports hiding library internal symbols... yes
checking whether build target supports WIN32 file API... no
checking whether build target supports WIN32 crypto API... no
checking for good-to-use Darwin CFLAGS... no
checking whether to support http... yes
checking whether to support ftp... yes
checking whether to support file... yes
checking whether to support ldap... yes
checking whether to support ldaps... yes
checking whether to support rtsp... yes
checking whether to support proxies... yes
checking whether to support dict... yes
checking whether to support telnet... yes
checking whether to support tftp... yes
checking whether to support pop3... yes
checking whether to support imap... yes
checking whether to support smb... yes
checking whether to support smtp... yes
checking whether to support gopher... yes
checking whether to support mqtt... no
checking whether to provide built-in manual... yes
checking whether to build documentation... no
checking whether to enable generation of C code... yes
checking whether to use libgcc... no
checking if X/Open network library is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for raw monotonic clock_gettime... yes
checking for pkg-config... /usr/bin/pkg-config
checking for zlib options with pkg-config... found
checking for zlib.h... yes
configure: found both libz and libz.h header
checking for BrotliDecoderDecompress in -lbrotlidec... no
checking for brotli/decode.h... no
checking for ZSTD_createDStream in -lzstd... no
checking for zstd.h... no
checking for lber.h... no
checking for ldap.h... no
checking for ldap_ssl.h... no
checking for LDAP libraries... cannot find LDAP libraries
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... yes
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Secure Transport... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for psl_builtin in -lpsl... yes
checking for libpsl.h... yes
checking for library containing gsasl_init... no
checking for RTMP_Init in -lrtmp... no
checking whether versioned symbols are wanted... no
checking whether to enable Windows native IDN (Windows native builds only)... no
checking whether to build with libidn2... (assumed) yes
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libidn2 options with pkg-config... no
configure: IDN_LIBS: "-lidn2"
configure: IDN_LDFLAGS: ""
configure: IDN_CPPFLAGS: ""
configure: IDN_DIR: ""
checking if idn2_lookup_ul can be linked... no
checking for idn2.h... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libnghttp2 options with pkg-config... no
checking for nghttp2_session_get_stream_local_window_size in -lnghttp2... no
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for sys/select.h... yes
checking for sys/socket.h... yes
checking for sys/ioctl.h... yes
checking for unistd.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for arpa/inet.h... yes
checking for net/if.h... yes
checking for netinet/in.h... yes
checking for netinet/in6.h... no
checking for sys/un.h... yes
checking for linux/tcp.h... yes
checking for netinet/tcp.h... yes
checking for netinet/udp.h... yes
checking for netdb.h... yes
checking for sys/sockio.h... no
checking for sys/stat.h... (cached) yes
checking for sys/param.h... yes
checking for termios.h... yes
checking for termio.h... yes
checking for fcntl.h... yes
checking for io.h... no
checking for pwd.h... yes
checking for utime.h... yes
checking for sys/utime.h... no
checking for sys/poll.h... yes
checking for poll.h... yes
checking for socket.h... no
checking for sys/resource.h... yes
checking for libgen.h... yes
checking for locale.h... yes
checking for stdbool.h... yes
checking for sys/filio.h... no
checking for sys/wait.h... yes
checking for sys/eventfd.h... yes
checking for setjmp.h... yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for struct timeval... yes
checking run-time libs availability... fine
checking size of size_t... 8
checking size of long... 8
checking size of int... 4
checking size of time_t... 8
checking size of off_t... 8
checking size of curl_off_t... 8
checking size of curl_socket_t... 4
checking for long long... yes
checking for ssize_t... yes
checking for bool... yes
checking for sa_family_t... yes
checking for suseconds_t... yes
checking if time_t is unsigned... no
checking for in_addr_t... yes
checking for struct sockaddr_storage... yes
checking for sys/select.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for select... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for recv... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for send... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for MSG_NOSIGNAL... yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking if alarm can be linked... yes
checking if alarm is prototyped... yes
checking if alarm is compilable... yes
checking if alarm usage allowed... yes
checking if alarm might be used... yes
checking for sys/types.h... (cached) yes
checking for strings.h... (cached) yes
checking for sys/types.h... (cached) yes
checking for libgen.h... (cached) yes
checking if basename can be linked... yes
checking if basename is prototyped... yes
checking if basename is compilable... yes
checking if basename usage allowed... yes
checking if basename might be used... yes
checking for sys/types.h... (cached) yes
checking for socket.h... (cached) no
checking if closesocket can be linked... no
checking if closesocket might be used... no
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking if CloseSocket can be linked... no
checking if CloseSocket might be used... no
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking for fcntl.h... (cached) yes
checking if fcntl can be linked... yes
checking if fcntl is prototyped... yes
checking if fcntl is compilable... yes
checking if fcntl usage allowed... yes
checking if fcntl might be used... yes
checking if fcntl O_NONBLOCK is compilable... yes
checking if fcntl O_NONBLOCK usage allowed... yes
checking if fcntl O_NONBLOCK might be used... yes
checking whether build target is a native Windows one... (cached) no
checking for sys/types.h... (cached) yes
checking for netdb.h... (cached) yes
checking if freeaddrinfo can be linked... yes
checking if freeaddrinfo is prototyped... yes
checking if freeaddrinfo is compilable... yes
checking if freeaddrinfo usage allowed... yes
checking if freeaddrinfo might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/xattr.h... yes
checking if fsetxattr can be linked... yes
checking if fsetxattr is prototyped... yes
checking if fsetxattr takes 5 args.... yes
checking if fsetxattr is compilable... yes
checking if fsetxattr usage allowed... yes
checking if fsetxattr might be used... yes
checking if ftruncate can be linked... yes
checking if ftruncate is prototyped... yes
checking if ftruncate is compilable... yes
checking if ftruncate usage allowed... yes
checking if ftruncate might be used... yes
checking for sys/types.h... (cached) yes
checking if getaddrinfo can be linked... yes
checking if getaddrinfo is prototyped... yes
checking if getaddrinfo is compilable... yes
checking if getaddrinfo seems to work... yes
checking if getaddrinfo usage allowed... yes
checking if getaddrinfo might be used... yes
checking if getaddrinfo is threadsafe... yes
checking if gethostbyname can be linked... yes
checking if gethostbyname is prototyped... yes
checking if gethostbyname is compilable... yes
checking if gethostbyname usage allowed... yes
checking if gethostbyname might be used... yes
checking if gethostbyname_r can be linked... yes
checking if gethostbyname_r is prototyped... yes
checking if gethostbyname_r takes 3 args.... no
checking if gethostbyname_r takes 5 args.... no
checking if gethostbyname_r takes 6 args.... yes
checking if gethostbyname_r is compilable... yes
checking if gethostbyname_r usage allowed... yes
checking if gethostbyname_r might be used... yes
checking if gethostname can be linked... yes
checking if gethostname is prototyped... yes
checking if gethostname is compilable... yes
checking for gethostname arg 2 data type... size_t
checking if gethostname usage allowed... yes
checking if gethostname might be used... yes
checking if getpeername can be linked... yes
checking if getpeername is prototyped... yes
checking if getpeername is compilable... yes
checking if getpeername usage allowed... yes
checking if getpeername might be used... yes
checking if getsockname can be linked... yes
checking if getsockname is prototyped... yes
checking if getsockname is compilable... yes
checking if getsockname usage allowed... yes
checking if getsockname might be used... yes
checking for net/if.h... (cached) yes
checking if if_nametoindex can be linked... yes
checking if if_nametoindex is prototyped... yes
checking if if_nametoindex is compilable... yes
checking if if_nametoindex usage allowed... yes
checking if if_nametoindex might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for netinet/in.h... (cached) yes
checking for ifaddrs.h... yes
checking if getifaddrs can be linked... yes
checking if getifaddrs is prototyped... yes
checking if getifaddrs is compilable... yes
checking if getifaddrs seems to work... yes
checking if getifaddrs usage allowed... yes
checking if getifaddrs might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking if gmtime_r can be linked... yes
checking if gmtime_r is prototyped... yes
checking if gmtime_r is compilable... yes
checking if gmtime_r seems to work... yes
checking if gmtime_r usage allowed... yes
checking if gmtime_r might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for netinet/in.h... (cached) yes
checking for arpa/inet.h... (cached) yes
checking if inet_ntop can be linked... yes
checking if inet_ntop is prototyped... yes
checking if inet_ntop is compilable... yes
checking if inet_ntop seems to work... yes
checking if inet_ntop usage allowed... yes
checking if inet_ntop might be used... yes
checking if inet_pton can be linked... yes
checking if inet_pton is prototyped... yes
checking if inet_pton is compilable... yes
checking if inet_pton seems to work... yes
checking if inet_pton usage allowed... yes
checking if inet_pton might be used... yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for sys/ioctl.h... (cached) yes
checking for stropts.h... no
checking if ioctl can be linked... yes
checking if ioctl is prototyped... yes
checking if ioctl is compilable... yes
checking if ioctl usage allowed... yes
checking if ioctl might be used... yes
checking if ioctl FIONBIO is compilable... yes
checking if ioctl FIONBIO usage allowed... yes
checking if ioctl FIONBIO might be used... yes
checking if ioctl SIOCGIFADDR is compilable... yes
checking if ioctl SIOCGIFADDR usage allowed... yes
checking if ioctl SIOCGIFADDR might be used... yes
checking if ioctlsocket can be linked... no
checking if ioctlsocket might be used... no
checking if IoctlSocket can be linked... no
checking if IoctlSocket might be used... no
checking if memrchr can be linked... yes
checking if memrchr is prototyped... no
checking if memrchr might be used... no
checking for sys/types.h... (cached) yes
checking for poll.h... (cached) yes
checking for sys/poll.h... (cached) yes
checking if poll can be linked... yes
checking if poll is prototyped... yes
checking if poll is compilable... yes
checking if poll seems to work... yes
checking if poll usage allowed... yes
checking if poll might be used... yes
checking for sys/types.h... (cached) yes
checking if sigaction can be linked... yes
checking if sigaction is prototyped... yes
checking if sigaction is compilable... yes
checking if sigaction usage allowed... yes
checking if sigaction might be used... yes
checking if siginterrupt can be linked... yes
checking if siginterrupt is prototyped... yes
checking if siginterrupt is compilable... yes
checking if siginterrupt usage allowed... yes
checking if siginterrupt might be used... yes
checking if signal can be linked... yes
checking if signal is prototyped... yes
checking if signal is compilable... yes
checking if signal usage allowed... yes
checking if signal might be used... yes
checking for sys/types.h... (cached) yes
checking if sigsetjmp can be linked... no
checking if sigsetjmp seems a macro... yes
checking if sigsetjmp is compilable... yes
checking if sigsetjmp usage allowed... yes
checking if sigsetjmp might be used... yes
checking if socket can be linked... yes
checking if socket is prototyped... yes
checking if socket is compilable... yes
checking if socket usage allowed... yes
checking if socket might be used... yes
checking if socketpair can be linked... yes
checking if socketpair is prototyped... yes
checking if socketpair is compilable... yes
checking if socketpair usage allowed... yes
checking if socketpair might be used... yes
checking if strcasecmp can be linked... yes
checking if strcasecmp is prototyped... yes
checking if strcasecmp is compilable... yes
checking if strcasecmp usage allowed... yes
checking if strcasecmp might be used... yes
checking if strcmpi can be linked... no
checking if strcmpi might be used... no
checking if strdup can be linked... yes
checking if strdup is prototyped... yes
checking if strdup is compilable... yes
checking if strdup usage allowed... yes
checking if strdup might be used... yes
checking if strerror_r can be linked... yes
checking if strerror_r is prototyped... yes
checking if strerror_r is compilable... yes
checking if strerror_r is glibc like... no
checking if strerror_r is POSIX like... yes
checking if strerror_r seems to work... yes
checking if strerror_r usage allowed... yes
checking if strerror_r might be used... yes
checking if stricmp can be linked... no
checking if stricmp might be used... no
checking if strtok_r can be linked... yes
checking if strtok_r is prototyped... yes
checking if strtok_r is compilable... yes
checking if strtok_r usage allowed... yes
checking if strtok_r might be used... yes
checking if strtoll can be linked... yes
checking if strtoll is prototyped... yes
checking if strtoll is compilable... yes
checking if strtoll usage allowed... yes
checking if strtoll might be used... yes
checking for ccache gcc options needed to detect all undeclared functions... none needed
checking whether getpwuid_r is declared... yes
checking for _fseeki64... no
checking for arc4random... no
checking for eventfd... yes
checking for fnmatch... yes
checking for fseeko... yes
checking for geteuid... yes
checking for getpass_r... no
checking for getppid... yes
checking for getpwuid... yes
checking for getpwuid_r... yes
checking for getrlimit... yes
checking for gettimeofday... yes
checking for if_nametoindex... yes
checking for mach_absolute_time... no
checking for pipe... yes
checking for sched_yield... yes
checking for sendmsg... yes
checking for setlocale... yes
checking for setmode... no
checking for setrlimit... yes
checking for snprintf... yes
checking for utime... yes
checking for utimes... yes
checking whether fseeko is declared... yes
checking how to set a socket into non-blocking mode... fcntl O_NONBLOCK
checking whether to enable the threaded resolver... yes
checking whether to link macOS CoreFoundation, CoreServices, and SystemConfiguration frameworks... no
checking whether to use POSIX threads for threaded resolver... auto
checking for pthread.h... yes
checking for pthread_create... yes
checking for dirent.h... yes
checking for opendir... yes
checking convert -I options to -isystem... yes
checking whether to enable verbose strings... yes
checking whether to enable SSPI support (Windows native builds only)... no
checking whether to enable basic authentication method... yes
checking whether to enable bearer authentication method... yes
checking whether to enable digest authentication method... yes
checking whether to enable kerberos authentication method... yes
checking whether to enable negotiate authentication method... yes
checking whether to enable aws sig methods... yes
checking whether to support NTLM... yes
checking whether to enable TLS-SRP authentication... yes
checking whether to enable Unix domain sockets... auto
checking for struct sockaddr_un.sun_path... yes
checking whether to support cookies... yes
checking whether to support socketpair... yes
checking whether to support HTTP authentication... yes
checking whether to support DoH... yes
checking whether to support the MIME API... yes
checking whether to support binding connections locally... yes
checking whether to support the form API... yes
checking whether to support date parsing... yes
checking whether to support netrc parsing... yes
checking whether to support progress-meter... yes
checking whether to support DNS shuffling... yes
checking whether to support curl_easy_option*... yes
checking whether to support alt-svc... yes
checking whether to support headers-api... yes
configure: disables HSTS due to lack of SSL
checking whether to support WebSockets... no
checking whether hiding of library internal symbols will actually happen... yes
checking if this build supports HTTPS-proxy... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating docs/Makefile
config.status: creating docs/examples/Makefile
config.status: creating docs/libcurl/Makefile
config.status: creating docs/libcurl/opts/Makefile
config.status: creating docs/cmdline-opts/Makefile
config.status: creating include/Makefile
config.status: creating include/curl/Makefile
config.status: creating src/Makefile
config.status: creating lib/Makefile
config.status: creating scripts/Makefile
config.status: creating lib/libcurl.vers
config.status: creating tests/Makefile
config.status: creating tests/config
config.status: creating tests/certs/Makefile
config.status: creating tests/certs/scripts/Makefile
config.status: creating tests/data/Makefile
config.status: creating tests/server/Makefile
config.status: creating tests/libtest/Makefile
config.status: creating tests/unit/Makefile
config.status: creating tests/http/config.ini
config.status: creating tests/http/Makefile
config.status: creating tests/http/clients/Makefile
config.status: creating packages/Makefile
config.status: creating packages/vms/Makefile
config.status: creating curl-config
config.status: creating libcurl.pc
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:
Host setup: x86_64-pc-linux-gnu
Install prefix: /usr/local
Compiler: ccache gcc
CFLAGS: -Werror-implicit-function-declaration -O2 -Wno-system-headers
CFLAGS extras:
CPPFLAGS:
LDFLAGS:
LIBS: -lpsl -lz
curl version: 8.10.0-DEV
SSL: no (--with-{openssl,gnutls,mbedtls,wolfssl,schannel,secure-transport,amissl,bearssl,rustls} )
SSH: no (--with-{libssh,libssh2})
zlib: enabled
brotli: no (--with-brotli)
zstd: no (--with-zstd)
GSS-API: no (--with-gssapi)
GSASL: no (libgsasl not found)
TLS-SRP: no (--enable-tls-srp)
resolver: POSIX threaded
IPv6: enabled
Unix sockets: enabled
IDN: no (--with-{libidn2,winidn})
Build docs: no
Build libcurl: Shared=no, Static=yes
Built-in manual: no (--enable-manual)
--libcurl option: enabled (--disable-libcurl-option)
Verbose errors: enabled (--disable-verbose)
Code coverage: disabled
SSPI: no (--enable-sspi)
ca cert bundle: no
ca cert path:
ca fallback:
LDAP: no (--enable-ldap / --with-ldap-lib / --with-lber-lib)
LDAPS: no (--enable-ldaps)
RTSP: enabled
RTMP: no (--with-librtmp)
PSL: enabled
Alt-svc: enabled (--disable-alt-svc)
Headers API: enabled (--disable-headers-api)
HSTS: no (--enable-hsts)
HTTP1: enabled (internal)
HTTP2: no (--with-nghttp2)
HTTP3: no (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic, --with-msh3)
ECH: no (--enable-ech)
WebSockets: no (--enable-websockets)
Protocols: dict file ftp gopher http imap ipfs ipns mqtt pop3 rtsp smtp telnet tftp
Features: alt-svc AsynchDNS IPv6 Largefile libz PSL threadsafe UnixSockets
configure: WARNING: Cannot find libraries for LDAP support: LDAP disabled
configure: WARNING: libgsasl was not found
configure: WARNING: Cannot find libraries for IDN support: IDN disabled
$ make -j3
Making all in lib
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
make all-am
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
CC libcurl_la-altsvc.lo
CC libcurl_la-amigaos.lo
CC libcurl_la-asyn-ares.lo
CC libcurl_la-asyn-thread.lo
CC libcurl_la-base64.lo
CC libcurl_la-bufq.lo
CC libcurl_la-bufref.lo
CC libcurl_la-c-hyper.lo
CC libcurl_la-cf-h1-proxy.lo
CC libcurl_la-cf-h2-proxy.lo
CC libcurl_la-cf-haproxy.lo
CC libcurl_la-cf-https-connect.lo
CC libcurl_la-cf-socket.lo
CC libcurl_la-cfilters.lo
CC libcurl_la-conncache.lo
CC libcurl_la-connect.lo
CC libcurl_la-content_encoding.lo
CC libcurl_la-cookie.lo
CC libcurl_la-curl_addrinfo.lo
CC libcurl_la-curl_des.lo
CC libcurl_la-curl_endian.lo
CC libcurl_la-curl_fnmatch.lo
CC libcurl_la-curl_get_line.lo
CC libcurl_la-curl_gethostname.lo
CC libcurl_la-curl_gssapi.lo
CC libcurl_la-curl_memrchr.lo
CC libcurl_la-curl_multibyte.lo
CC libcurl_la-curl_ntlm_core.lo
CC libcurl_la-curl_path.lo
CC libcurl_la-curl_range.lo
CC libcurl_la-curl_rtmp.lo
CC libcurl_la-curl_sasl.lo
CC libcurl_la-curl_sha512_256.lo
CC libcurl_la-curl_sspi.lo
CC libcurl_la-curl_threads.lo
CC libcurl_la-curl_trc.lo
CC libcurl_la-cw-out.lo
CC libcurl_la-dict.lo
CC libcurl_la-dllmain.lo
CC libcurl_la-doh.lo
CC libcurl_la-dynbuf.lo
CC libcurl_la-dynhds.lo
CC libcurl_la-easy.lo
CC libcurl_la-easygetopt.lo
CC libcurl_la-easyoptions.lo
CC libcurl_la-escape.lo
CC libcurl_la-file.lo
CC libcurl_la-fileinfo.lo
CC libcurl_la-fopen.lo
CC libcurl_la-formdata.lo
CC libcurl_la-ftp.lo
CC libcurl_la-ftplistparser.lo
CC libcurl_la-getenv.lo
CC libcurl_la-getinfo.lo
CC libcurl_la-gopher.lo
CC libcurl_la-hash.lo
CC libcurl_la-headers.lo
CC libcurl_la-hmac.lo
CC libcurl_la-hostasyn.lo
CC libcurl_la-hostip.lo
CC libcurl_la-hostip4.lo
CC libcurl_la-hostip6.lo
CC libcurl_la-hostsyn.lo
CC libcurl_la-hsts.lo
CC libcurl_la-http.lo
CC libcurl_la-http1.lo
CC libcurl_la-http2.lo
CC libcurl_la-http_aws_sigv4.lo
CC libcurl_la-http_chunks.lo
CC libcurl_la-http_digest.lo
CC libcurl_la-http_negotiate.lo
CC libcurl_la-http_ntlm.lo
CC libcurl_la-http_proxy.lo
CC libcurl_la-idn.lo
CC libcurl_la-if2ip.lo
CC libcurl_la-imap.lo
CC libcurl_la-inet_ntop.lo
CC libcurl_la-inet_pton.lo
CC libcurl_la-krb5.lo
CC libcurl_la-ldap.lo
CC libcurl_la-llist.lo
CC libcurl_la-macos.lo
CC libcurl_la-md4.lo
CC libcurl_la-md5.lo
CC libcurl_la-memdebug.lo
CC libcurl_la-mime.lo
CC libcurl_la-mprintf.lo
CC libcurl_la-mqtt.lo
CC libcurl_la-multi.lo
CC libcurl_la-netrc.lo
CC libcurl_la-nonblock.lo
CC libcurl_la-noproxy.lo
CC libcurl_la-openldap.lo
CC libcurl_la-parsedate.lo
CC libcurl_la-pingpong.lo
CC libcurl_la-pop3.lo
CC libcurl_la-progress.lo
CC libcurl_la-psl.lo
CC libcurl_la-rand.lo
CC libcurl_la-rename.lo
CC libcurl_la-request.lo
CC libcurl_la-select.lo
CC libcurl_la-rtsp.lo
CC libcurl_la-sendf.lo
CC libcurl_la-setopt.lo
CC libcurl_la-sha256.lo
CC libcurl_la-share.lo
CC libcurl_la-slist.lo
CC libcurl_la-smb.lo
CC libcurl_la-smtp.lo
CC libcurl_la-socketpair.lo
CC libcurl_la-socks.lo
CC libcurl_la-socks_gssapi.lo
CC libcurl_la-socks_sspi.lo
CC libcurl_la-speedcheck.lo
CC libcurl_la-splay.lo
CC libcurl_la-strcase.lo
CC libcurl_la-strdup.lo
CC libcurl_la-strerror.lo
CC libcurl_la-strtok.lo
CC libcurl_la-strtoofft.lo
CC libcurl_la-system_win32.lo
CC libcurl_la-telnet.lo
CC libcurl_la-tftp.lo
CC libcurl_la-timediff.lo
CC libcurl_la-timeval.lo
CC libcurl_la-transfer.lo
CC libcurl_la-url.lo
CC libcurl_la-urlapi.lo
CC libcurl_la-version.lo
CC libcurl_la-version_win32.lo
CC libcurl_la-warnless.lo
CC libcurl_la-ws.lo
CC vauth/libcurl_la-cleartext.lo
CC vauth/libcurl_la-cram.lo
CC vauth/libcurl_la-digest.lo
CC vauth/libcurl_la-digest_sspi.lo
CC vauth/libcurl_la-gsasl.lo
CC vauth/libcurl_la-krb5_gssapi.lo
CC vauth/libcurl_la-krb5_sspi.lo
CC vauth/libcurl_la-ntlm.lo
CC vauth/libcurl_la-ntlm_sspi.lo
CC vauth/libcurl_la-oauth2.lo
CC vauth/libcurl_la-spnego_gssapi.lo
CC vauth/libcurl_la-spnego_sspi.lo
CC vauth/libcurl_la-vauth.lo
CC vtls/libcurl_la-bearssl.lo
CC vtls/libcurl_la-cipher_suite.lo
CC vtls/libcurl_la-gtls.lo
CC vtls/libcurl_la-hostcheck.lo
CC vtls/libcurl_la-keylog.lo
CC vtls/libcurl_la-mbedtls.lo
CC vtls/libcurl_la-mbedtls_threadlock.lo
CC vtls/libcurl_la-openssl.lo
CC vtls/libcurl_la-rustls.lo
CC vtls/libcurl_la-schannel.lo
CC vtls/libcurl_la-schannel_verify.lo
CC vtls/libcurl_la-sectransp.lo
CC vtls/libcurl_la-vtls.lo
CC vtls/libcurl_la-wolfssl.lo
CC vtls/libcurl_la-x509asn1.lo
CC vquic/libcurl_la-curl_msh3.lo
CC vquic/libcurl_la-curl_ngtcp2.lo
CC vquic/libcurl_la-curl_osslq.lo
CC vquic/libcurl_la-curl_quiche.lo
CC vquic/libcurl_la-vquic.lo
CC vquic/libcurl_la-vquic-tls.lo
CC vssh/libcurl_la-libssh.lo
CC vssh/libcurl_la-libssh2.lo
CC vssh/libcurl_la-wolfssh.lo
CCLD libcurl.la
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
Making all in docs
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
Making all in .
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
make[2]: Nothing to be done for 'all-am'.
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
Making all in cmdline-opts
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
Making all in libcurl
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs/libcurl'
Making all in opts
make[3]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs/libcurl/opts'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs/libcurl/opts'
make[3]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs/libcurl'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs/libcurl'
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs/libcurl'
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
Making all in src
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/src'
CC slist_wc.o
CC tool_binmode.o
CC terminal.o
CC tool_bname.o
CC tool_cb_dbg.o
CC tool_cb_hdr.o
CC tool_cb_prg.o
CC tool_cb_rea.o
CC tool_cb_see.o
CC tool_cb_soc.o
CC tool_cb_wrt.o
CC tool_cfgable.o
CC tool_doswin.o
CC tool_dirhie.o
CC tool_easysrc.o
CC tool_filetime.o
CC tool_findfile.o
CC tool_formparse.o
CC tool_getparam.o
CC tool_getpass.o
CC tool_help.o
CC tool_helpers.o
echo '#include "tool_hugehelp.h"' >> tool_hugehelp.c
CC tool_libinfo.o
CC tool_ipfs.o
CC tool_listhelp.o
CC tool_main.o
CC tool_msgs.o
CC tool_operate.o
CC tool_operhlp.o
CC tool_paramhlp.o
CC tool_parsecfg.o
CC tool_progress.o
CC tool_setopt.o
CC tool_sleep.o
CC tool_stderr.o
CC tool_strdup.o
CC tool_urlglob.o
CC tool_util.o
CC tool_vms.o
CC tool_writeout.o
CC tool_writeout_json.o
CC tool_xattr.o
CC var.o
CC ../lib/base64.o
CC tool_hugehelp.o
CC ../lib/curl_multibyte.o
CC ../lib/dynbuf.o
CC ../lib/nonblock.o
CC ../lib/strtoofft.o
CC ../lib/timediff.o
CC ../lib/version_win32.o
CC ../lib/warnless.o
CCLD curl
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/src'
Making all in scripts
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/scripts'
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0'
| @@ -967,3 +967,6 @@ zsh | |
| zstd | |
| Zuul | |
| zuul | |
| + | crontab |
| + | testcurl |
| + | lldb |
| @@ -22,7 +22,14 @@ | |
| # | |
| ########################################################################### | |
| - | MANDISTPAGES = runtests.1.dist testcurl.1.dist |
| + | if BUILD_DOCS |
| + | # if we disable man page building, ignore these |
| + | RUNTESTS_DOCS = runtests.1 |
| + | TESTCURL_DOCS = testcurl.1 |
| + | MANFILES = $(RUNTESTS_DOCS) $(TESTCURL_DOCS) |
| + | endif |
| + | |
| + | CURLPAGES = runtests.md testcurl.md |
| # scripts used in test cases | |
| TESTSCRIPTS = \ | |
| @@ -71,7 +78,6 @@ EXTRA_DIST = \ | |
| requirements.txt \ | |
| rtspserver.pl \ | |
| runner.pm \ | |
| - | runtests.1 \ |
| runtests.pl \ | |
| secureserver.pl \ | |
| serverhelp.pm \ | |
| @@ -80,14 +86,14 @@ EXTRA_DIST = \ | |
| sshhelp.pm \ | |
| sshserver.pl \ | |
| stunnel.pem \ | |
| - | testcurl.1 \ |
| testcurl.pl \ | |
| testutil.pm \ | |
| tftpserver.pl \ | |
| util.py \ | |
| valgrind.pm \ | |
| valgrind.supp \ | |
| - | $(TESTSCRIPTS) |
| + | $(TESTSCRIPTS) \ |
| + | $(CURLPAGES) |
| DISTCLEANFILES = configurehelp.pm | |
| @@ -130,6 +136,13 @@ TEST_NF = -a -p ~flaky ~timing-dependent | |
| TEST_CI = $(TEST_NF) -r -rm | |
| endif | |
| + | CD2NROFF = $(top_srcdir)/scripts/cd2nroff $< >$@ |
| + | |
| + | SUFFIXES = .1 .md |
| + | |
| + | .md.1: |
| + | $(CD2)$(CD2NROFF) |
| + | |
| # make sure that PERL is pointing to an executable | |
| perlcheck: | |
| @if ! test -x "$(PERL)"; then echo "No perl!"; exit 2; fi | |
| @@ -164,7 +177,7 @@ checksrc: | |
| (cd server && $(MAKE) checksrc) | |
| (cd http && $(MAKE) checksrc) | |
| - | if DEBUGBUILD |
| - | # for debug builds, we scan the sources on all regular make invokes |
| - | all-local: checksrc |
| - | endif |
| + | all-local: $(MANFILES) |
| + | |
| + | distclean: |
| + | rm -f $(MANFILES) |
| @@ -1,230 +0,0 @@ | |
| - | .\" ************************************************************************** |
| - | .\" * _ _ ____ _ |
| - | .\" * Project ___| | | | _ \| | |
| - | .\" * / __| | | | |_) | | |
| - | .\" * | (__| |_| | _ <| |___ |
| - | .\" * \___|\___/|_| \_\_____| |
| - | .\" * |
| - | .\" * Copyright (C) Daniel Stenberg, <[email protected]>, et al. |
| - | .\" * |
| - | .\" * This software is licensed as described in the file COPYING, which |
| - | .\" * you should have received as part of this distribution. The terms |
| - | .\" * are also available at https://curl.se/docs/copyright.html. |
| - | .\" * |
| - | .\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell |
| - | .\" * copies of the Software, and permit persons to whom the Software is |
| - | .\" * furnished to do so, under the terms of the COPYING file. |
| - | .\" * |
| - | .\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| - | .\" * KIND, either express or implied. |
| - | .\" * |
| - | .\" * SPDX-License-Identifier: curl |
| - | .\" * |
| - | .\" ************************************************************************** |
| - | .\" |
| - | .TH runtests.pl 1 "06 Jun 2023" runtests runtests |
| - | .SH NAME |
| - | runtests.pl \- run one or more test cases |
| - | .SH SYNOPSIS |
| - | .B runtests.pl [options] [tests] |
| - | .SH DESCRIPTION |
| - | \fIruntests.pl\fP runs one, several or all the existing test cases in curl's |
| - | test suite. It is often called from the root Makefile of the curl package with |
| - | \&'make test'. |
| - | .SH "TESTS" |
| - | Specify which test(s) to run by specifying test numbers or keywords. |
| - | |
| - | If no test number or keyword is given, all existing tests that the script can |
| - | find will be considered for running. You can specify single test cases to run |
| - | by specifying test numbers space-separated, like "1 3 5 7 11", and you can |
| - | specify a range of tests like "45 to 67". |
| - | |
| - | Specify tests to not run with a leading exclamation point, like "!66", which |
| - | runs all available tests except number 66. |
| - | |
| - | Prefix a test number with a tilde (~) to still run it, but ignore the results. |
| - | |
| - | It is also possible to specify tests based on a keyword describing the test(s) |
| - | to run, like "FTPS". The keywords are strings used in the individual tests. |
| - | |
| - | You can also specify keywords with a leading exclamation point and the keyword |
| - | or phrase, like "!HTTP NTLM auth" to run all tests \fBexcept\fP those using |
| - | this keyword. Remember that the exclamation marks and spaces will need to be |
| - | quoted somehow when entered at many command shells. |
| - | |
| - | Prefix a keyword with a tilde (~) to still run it, but ignore the results. |
| - | |
| - | .SH "OUTPUT" |
| - | |
| - | When running without -s (short output), for instance when running runtests.pl |
| - | directly rather than via make, each test will emits a pair of lines like this: |
| - | |
| - | Test 0045...[simple HTTP Location: without protocol in initial URL] |
| - | --pd---e-v- OK (45 out of 1427, remaining: 16:08, took 6.188s, duration: 00:31) |
| - | |
| - | the first line contains the test number and a description. On the second line, |
| - | the characters at the beginning are flags indicating which aspects of curl's |
| - | behavior were checked by the test: |
| - | |
| - | s stdout |
| - | r stderr |
| - | p protocol |
| - | d data |
| - | u upload |
| - | P proxy |
| - | o output |
| - | e exit code |
| - | m memory |
| - | v valgrind |
| - | E the test was run event-based |
| - | |
| - | The remainder of the second line contains the test result, current test sequence, |
| - | total number of tests to be run and an estimated amount of time to complete the |
| - | test run. |
| - | |
| - | .SH OPTIONS |
| - | .IP "-a" |
| - | Continue running the rest of the test cases even if one test fails. By |
| - | default, the test script stops as soon as an error is detected. |
| - | .IP "-ac <curl>" |
| - | Provide a path to a curl binary to talk to APIs (currently only CI test APIs). |
| - | .IP "-am" |
| - | Display test results in automake style output (PASS/FAIL: [number] [name]). |
| - | .IP "-c <curl>" |
| - | Provide a path to a custom curl binary to run the tests with. Default is the |
| - | curl executable in the build tree. |
| - | .IP "-d" |
| - | Enable protocol debug: have the servers display protocol output. If used in |
| - | conjunction with parallel testing, it will be difficult to associate the logs |
| - | with the test being run. |
| - | .IP "-E <exclude_file>" |
| - | Load the \fBexclude_file\fP with additional reasons why certain tests |
| - | should be skipped. Useful when testing with external HTTP proxies in |
| - | which case some of the tests aren't appropriate. |
| - | The file contains colon-delimited lines. The first field contains the |
| - | type of exclusion, the second field contains a pattern and the final |
| - | field contains the reason why matching tests should be skipped. |
| - | The exclusion types are \fkeyword\fP, \ftest\fP, and \ftool\fP. |
| - | .IP "-e" |
| - | Run the test event-based (if possible). This will make runtests invoke curl |
| - | with --test-event option. This option only works if both curl and libcurl were |
| - | built debug-enabled. |
| - | .IP "-f" |
| - | Force the test to run even if mentioned in DISABLED. |
| - | .IP "-g" |
| - | Run the given test(s) with gdb. This is best used on a single test case and |
| - | curl built --disable-shared. This then fires up gdb with command line set to |
| - | run the specified test case. Simply (set a break-point and) type 'run' to |
| - | start. |
| - | .IP "-gl" |
| - | Run the given test(s) with lldb. This is best used on a single test case and |
| - | curl built --disable-shared. This then fires up lldb with command line set to |
| - | run the specified test case. Simply (set a break-point and) type 'run' to |
| - | start. |
| - | .IP "-gw" |
| - | Run the given test(s) with gdb as a windowed application. |
| - | .IP "-h, --help" |
| - | Displays a help text about this program's command line options. |
| - | .IP "-j[num]" |
| - | Spawn num processes to run tests. This defaults to 0 to run tests serially |
| - | within a single process. Using a number greater than one allows multiple tests |
| - | to run in parallel, speeding up a test run. The optimum number is dependent on |
| - | the system and set of tests to run, but 7*number of CPU cores is a good figure |
| - | to start with, or 1.3*number of CPU cores if Valgrind is in use. Enabling |
| - | parallel tests is not recommended in conjunction with the \-g option. |
| - | .IP "-k" |
| - | Keep output and log files in log/ after a test run, even if no error was |
| - | detected. Useful for debugging. |
| - | .IP "-L <file>" |
| - | Load and execute the specified file which should contain perl code. |
| - | This option allows one to change \fIruntests.pl\fP behaviour by overwriting |
| - | functions and variables and is useful when testing external proxies |
| - | using curl's regression test suite. |
| - | .IP "-l" |
| - | Lists all test case names. |
| - | .IP "-n" |
| - | Disable the check for and use of valgrind. |
| - | .IP "--no-debuginfod" |
| - | Delete the DEBUGINFOD_URLS variable if that is defined. Makes valgrind, gdb |
| - | etc not able to use this functionality. |
| - | .IP "-o <variablename=value>" |
| - | Overwrite the specified internal \fBvariable\fP with \fBvalue\fP. |
| - | Useful to change variables that didn't get a dedicated flag to change them. |
| - | Check the source to see which variables are available. |
| - | .IP "-P <proxy>" |
| - | Use the specified HTTP proxy when executing tests, even if the tests |
| - | themselves don't specify a proxy. This option allows one to test external |
| - | proxies using curl's regression test suite. |
| - | .IP "-p" |
| - | Prints out all files in "log/" to stdout when a test case fails. Very |
| - | practical when used in the automated and distributed tests since then the |
| - | people checking the failures and the reasons for them might not have physical |
| - | access to the machine and logs. |
| - | .IP "-R" |
| - | Run the tests in a scrambled, or randomized, order instead of sequentially. |
| - | |
| - | The random seed initially set for this is fixed per month and can be set with |
| - | \fI--seed\fP. |
| - | .IP "-r" |
| - | Display run time statistics. (Requires Perl Time::HiRes module) |
| - | .IP "-rf" |
| - | Display full run time statistics. (Requires Perl Time::HiRes module) |
| - | .IP "-rm" |
| - | Force removal of files by killing locking processes. (Windows only, |
| - | requires Sysinternals handle[64].exe to be on PATH) |
| - | .IP "--repeat=[num]" |
| - | This will repeat the given set of test numbers this many times. If no test |
| - | numbers are given, it will repeat ALL tests this many times. It iteratively |
| - | adds the new sequence at the end of the initially given one. |
| - | |
| - | If \fB-R\fP is also used, the scrambling is done after the repeats have |
| - | extended the test sequence. |
| - | .IP "-s" |
| - | Shorter output. Speaks less than default. |
| - | .IP "--seed=[num]" |
| - | When using \fI--shallow\fP or \fI-R\fP that randomize certain aspects of the |
| - | behavior, this option can set the initial seed. If not set, the random seed |
| - | will be set based on the currently set local year and month and the first line |
| - | of the "curl -V" output. |
| - | .IP "--shallow=[num]" |
| - | Used together with \fB-t\fP. This limits the number of tests to fail in |
| - | torture mode to no more than 'num' per test case. If this reduces the amount, |
| - | the script will randomly discard entries to fail until the amount is 'num'. |
| - | |
| - | The random seed initially set for this is fixed per month and can be set with |
| - | \fI--seed\fP. |
| - | .IP "-t[num]" |
| - | Selects a \fBtorture\fP test for the given tests. This makes runtests.pl first |
| - | run the tests once and count the number of memory allocations made. It then |
| - | reruns the test that number of times, each time forcing one of the allocations |
| - | to fail until all allocs have been tested. By setting \fInum\fP you can force |
| - | the allocation with that number to be set to fail at once instead of looping |
| - | through everyone, which is very handy when debugging and then often in |
| - | combination with \fI-g\fP. |
| - | .IP "-u" |
| - | Error instead of warning on server unexpectedly alive. |
| - | .IP "-v" |
| - | Enable verbose output. Speaks more than by default. If used in conjunction with |
| - | parallel testing, it will be difficult to associate the logs with the test |
| - | being run. |
| - | .IP "-vc <curl>" |
| - | Provide a path to a custom curl binary to run when verifying that the servers |
| - | running are indeed our test servers. Default is the curl executable in the |
| - | build tree. |
| - | .SH "RUNNING TESTS" |
| - | Many tests have conditions that must be met before the test case can run |
| - | fine. They could depend on built-in features in libcurl or features present in |
| - | the operating system or even in third-party libraries that curl may or may not |
| - | use. |
| - | .P |
| - | The test script checks most of these by itself to determine when it is |
| - | safe to attempt to run each test. Those which cannot be run due to |
| - | failed requirements will simply be skipped and listed at the completion |
| - | of all test cases. In some unusual configurations, the test script |
| - | cannot make the correct determination for all tests. In these cases, |
| - | the problematic tests can be skipped using the "!keyword" skip feature |
| - | documented earlier. |
| - | .SH "WRITING TESTS" |
| - | The simplest way to write test cases is to start with a similar existing test, |
| - | save it with a new number and then adjust it to fit. There's an attempt to |
| - | document the test case file format in the tests/FILEFORMAT.md. |
| @@ -0,0 +1,295 @@ | |
| + | --- |
| + | c: Copyright (C) Daniel Stenberg, <daniel.se>, et al. |
| + | SPDX-License-Identifier: curl |
| + | Title: runtests.pl |
| + | Section: 1 |
| + | Source: runtests |
| + | See-also: |
| + | - runtests.pl |
| + | Added-in: 7.5 |
| + | --- |
| + | |
| + | # NAME |
| + | |
| + | runtests.pl - run one or more test cases |
| + | |
| + | # SYNOPSIS |
| + | |
| + | **runtests.pl [options] [tests]** |
| + | |
| + | # DESCRIPTION |
| + | |
| + | *runtests.pl* runs one, several or all the existing test cases in curl's |
| + | test suite. It is often called from the root Makefile of the curl package with |
| + | 'make test'. |
| + | |
| + | # TESTS |
| + | |
| + | Specify which test(s) to run by specifying test numbers or keywords. |
| + | |
| + | If no test number or keyword is given, all existing tests that the script can |
| + | find will be considered for running. You can specify single test cases to run |
| + | by specifying test numbers space-separated, like `1 3 5 7 11`, and you can |
| + | specify a range of tests like `45 to 67`. |
| + | |
| + | Specify tests to not run with a leading exclamation point, like `!66`, which |
| + | runs all available tests except number 66. |
| + | |
| + | Prefix a test number with a tilde (~) to still run it, but ignore the results. |
| + | |
| + | It is also possible to specify tests based on a keyword describing the test(s) |
| + | to run, like `FTPS`. The keywords are strings used in the individual tests. |
| + | |
| + | You can also specify keywords with a leading exclamation point and the keyword |
| + | or phrase, like "!HTTP NTLM auth" to run all tests **except** those using |
| + | this keyword. Remember that the exclamation marks and spaces will need to be |
| + | quoted somehow when entered at many command shells. |
| + | |
| + | Prefix a keyword with a tilde (~) to still run it, but ignore the results. |
| + | |
| + | # OUTPUT |
| + | |
| + | When running without `-s` (short output), for instance when running |
| + | runtests.pl directly rather than via make, each test will emits a pair of |
| + | lines like this: |
| + | |
| + | Test 0045...[simple HTTP Location: without protocol in initial URL] |
| + | --pd---e-v- OK (45 out of 1427, remaining: 16:08, took 6.188s, duration: 00:31) |
| + | |
| + | the first line contains the test number and a description. On the second line, |
| + | the characters at the beginning are flags indicating which aspects of curl's |
| + | behavior were checked by the test: |
| + | |
| + | s stdout |
| + | r stderr |
| + | p protocol |
| + | d data |
| + | u upload |
| + | P proxy |
| + | o output |
| + | e exit code |
| + | m memory |
| + | v valgrind |
| + | E the test was run event-based |
| + | |
| + | The remainder of the second line contains the test result, current test sequence, |
| + | total number of tests to be run and an estimated amount of time to complete the |
| + | test run. |
| + | |
| + | # OPTIONS |
| + | |
| + | ## `-a` |
| + | |
| + | Continue running the rest of the test cases even if one test fails. By |
| + | default, the test script stops as soon as an error is detected. |
| + | |
| + | ## `-ac \<curl\>` |
| + | |
| + | Provide a path to a curl binary to talk to APIs (currently only CI test APIs). |
| + | |
| + | ## `-am` |
| + | |
| + | Display test results in automake style output (`PASS/FAIL: [number] [name]`). |
| + | |
| + | ## `-c\<curl\>` |
| + | |
| + | Provide a path to a custom curl binary to run the tests with. Default is the |
| + | curl executable in the build tree. |
| + | |
| + | ## `-d` |
| + | |
| + | Enable protocol debug: have the servers display protocol output. If used in |
| + | conjunction with parallel testing, it will be difficult to associate the logs |
| + | with the test being run. |
| + | |
| + | ## `-E \<exclude_file\>` |
| + | |
| + | Load the **exclude_file** with additional reasons why certain tests should be |
| + | skipped. Useful when testing with external HTTP proxies in which case some of |
| + | the tests aren't appropriate. |
| + | |
| + | The file contains colon-delimited lines. The first field contains the type of |
| + | exclusion, the second field contains a pattern and the final field contains |
| + | the reason why matching tests should be skipped. The exclusion types are |
| + | *keyword*, *test*, and *tool*. |
| + | |
| + | ## `-e` |
| + | |
| + | Run the test event-based (if possible). This will make runtests invoke curl |
| + | with --test-event option. This option only works if both curl and libcurl were |
| + | built debug-enabled. |
| + | |
| + | ## `-f` |
| + | |
| + | Force the test to run even if mentioned in DISABLED. |
| + | |
| + | ## `-g` |
| + | |
| + | Run the given test(s) with gdb. This is best used on a single test case and |
| + | curl built --disable-shared. This then fires up gdb with command line set to |
| + | run the specified test case. Simply (set a break-point and) type 'run' to |
| + | start. |
| + | |
| + | ## `-gl` |
| + | |
| + | Run the given test(s) with lldb. This is best used on a single test case and |
| + | curl built --disable-shared. This then fires up lldb with command line set to |
| + | run the specified test case. Simply (set a break-point and) type 'run' to |
| + | start. |
| + | |
| + | ## `-gw` |
| + | |
| + | Run the given test(s) with gdb as a windowed application. |
| + | |
| + | ## `-h, --help` |
| + | |
| + | Displays a help text about this program's command line options. |
| + | |
| + | ## `-j[num]` |
| + | |
| + | Spawn the given number of processes to run tests in. This defaults to 0 to run |
| + | tests serially within a single process. Using a number greater than one allows |
| + | multiple tests to run in parallel, speeding up a test run. The optimum number |
| + | is dependent on the system and set of tests to run, but 7 times number of CPU |
| + | cores is a good figure to start with, or 1.3 times number of CPU cores if |
| + | Valgrind is in use. Enabling parallel tests is not recommended in conjunction |
| + | with the -g option. |
| + | |
| + | ## `-k` |
| + | |
| + | Keep output and log files in log/ after a test run, even if no error was |
| + | detected. Useful for debugging. |
| + | |
| + | ## `-L \<file\>` |
| + | |
| + | Load and execute the specified file which should contain perl code. This |
| + | option allows one to change *runtests.pl* behavior by overwriting functions |
| + | and variables and is useful when testing external proxies using curl's |
| + | regression test suite. |
| + | |
| + | ## `-l` |
| + | |
| + | Lists all test case names. |
| + | |
| + | ## `-n` |
| + | |
| + | Disable the check for and use of valgrind. |
| + | |
| + | ## `--no-debuginfod` |
| + | |
| + | Delete the `DEBUGINFOD_URLS` variable if that is defined. Makes valgrind, gdb |
| + | etc not able to use this functionality. |
| + | |
| + | ## `-o \<variablename=value\>` |
| + | |
| + | Overwrite the specified internal **variable** with **value**. Useful to change |
| + | variables that didn't get a dedicated flag to change them. Check the source to |
| + | see which variables are available. |
| + | |
| + | ## `-P \<proxy\>` |
| + | |
| + | Use the specified HTTP proxy when executing tests, even if the tests |
| + | themselves don't specify a proxy. This option allows one to test external |
| + | proxies using curl's regression test suite. |
| + | |
| + | ## `-p` |
| + | |
| + | Prints out all files in the log directory to stdout when a test case fails. |
| + | Practical when used in the automated and distributed tests since then the |
| + | people checking the failures and the reasons for them might not have physical |
| + | access to the machine and logs. |
| + | |
| + | ## `-R` |
| + | |
| + | Run the tests in a scrambled, or randomized, order instead of sequentially. |
| + | |
| + | The random seed initially set for this is fixed per month and can be set with |
| + | *--seed*. |
| + | |
| + | ## `-r` |
| + | |
| + | Display run time statistics. (Requires the `Perl Time::HiRes` module) |
| + | |
| + | ## `-rf` |
| + | |
| + | Display full run time statistics. (Requires the `Perl Time::HiRes` module) |
| + | |
| + | ## `-rm` |
| + | |
| + | Force removal of files by killing locking processes. (Windows only, requires |
| + | the **Sysinternals** `handle[64].exe` to be on PATH) |
| + | |
| + | ## `--repeat=[num]` |
| + | |
| + | This repeats the given set of test numbers this many times. If no test numbers |
| + | are given, it will repeat ALL tests this many times. It adds the new repeated |
| + | sequence at the end of the initially given one. |
| + | |
| + | If **-R** option is also used, the scrambling is done after the repeats have |
| + | extended the test sequence. |
| + | |
| + | ## `-s` |
| + | |
| + | Shorter output. Speaks less than default. |
| + | |
| + | ## `--seed=[num]` |
| + | |
| + | When using *--shallow* or *-R* that randomize certain aspects of the |
| + | behavior, this option can set the initial seed. If not set, the random seed |
| + | will be set based on the currently set local year and month and the first line |
| + | of the "curl -V" output. |
| + | |
| + | ## `--shallow=[num]` |
| + | |
| + | Used together with **-t**. This limits the number of tests to fail in torture |
| + | mode to no more than **num** per test case. If this reduces the amount, the |
| + | script will randomly discard entries to fail until the amount is **num**. |
| + | |
| + | The random seed initially set for this is fixed per month and can be set with |
| + | *--seed*. |
| + | |
| + | ## `-t[num]` |
| + | |
| + | Selects a **torture** test for the given tests. This makes runtests.pl first |
| + | run the tests once and count the number of memory allocations made. It then |
| + | reruns the test that number of times, each time forcing one of the allocations |
| + | to fail until all allocations have been tested. By setting *num* you can force |
| + | the allocation with that number to be set to fail at once instead of looping |
| + | through everyone, which is handy when debugging and then often in combination |
| + | with *-g*. |
| + | |
| + | ## `-u` |
| + | |
| + | Error instead of warning on server unexpectedly alive. |
| + | |
| + | ## `-v` |
| + | |
| + | Enable verbose output. Speaks more than by default. If used in conjunction with |
| + | parallel testing, it will be difficult to associate the logs with the test |
| + | being run. |
| + | |
| + | ## `-vc \<curl\>` |
| + | |
| + | Provide a path to a custom curl binary to run when verifying that the servers |
| + | running are indeed our test servers. Default is the curl executable in the |
| + | build tree. |
| + | |
| + | # RUNNING TESTS |
| + | |
| + | Many tests have conditions that must be met before the test case can run fine. |
| + | They could depend on built-in features in libcurl or features present in the |
| + | operating system or even in third-party libraries that curl may or may not |
| + | use. |
| + | |
| + | The test script checks most of these by itself to determine when it is safe to |
| + | attempt to run each test. Those which cannot be run due to failed requirements |
| + | will simply be skipped and listed at the completion of all test cases. In some |
| + | unusual configurations, the test script cannot make the correct determination |
| + | for all tests. In these cases, the problematic tests can be skipped using the |
| + | "!keyword" skip feature documented earlier. |
| + | |
| + | # WRITING TESTS |
| + | |
| + | The simplest way to write test cases is to start with a similar existing test, |
| + | save it with a new number and then adjust it to fit. There's an attempt to |
| + | document the test case file format in **tests/FILEFORMAT.md**. |
| @@ -1,126 +0,0 @@ | |
| - | .\" ************************************************************************** |
| - | .\" * _ _ ____ _ |
| - | .\" * Project ___| | | | _ \| | |
| - | .\" * / __| | | | |_) | | |
| - | .\" * | (__| |_| | _ <| |___ |
| - | .\" * \___|\___/|_| \_\_____| |
| - | .\" * |
| - | .\" * Copyright (C) Daniel Stenberg, <[email protected]>, et al. |
| - | .\" * |
| - | .\" * This software is licensed as described in the file COPYING, which |
| - | .\" * you should have received as part of this distribution. The terms |
| - | .\" * are also available at https://curl.se/docs/copyright.html. |
| - | .\" * |
| - | .\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell |
| - | .\" * copies of the Software, and permit persons to whom the Software is |
| - | .\" * furnished to do so, under the terms of the COPYING file. |
| - | .\" * |
| - | .\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| - | .\" * KIND, either express or implied. |
| - | .\" * |
| - | .\" * SPDX-License-Identifier: curl |
| - | .\" * |
| - | .\" ************************************************************************** |
| - | .\" |
| - | .TH testcurl.pl 1 "24 Mar 2010" testcurl testcurl |
| - | .SH NAME |
| - | testcurl.pl \- (automatically) test curl |
| - | .SH SYNOPSIS |
| - | .B testcurl.pl [options] [dir] > output |
| - | .SH DESCRIPTION |
| - | \fItestcurl.pl\fP is the master script to use for automatic testing of curl |
| - | off git or daily snapshots. It is written for the purpose of being run from a |
| - | crontab job or similar at a regular interval. The output is suitable to be |
| - | mailed to [email protected] to be dealt with automatically (make sure |
| - | the subject includes the word "autobuild" as the mail gets silently discarded |
| - | otherwise). The most current build status (with a reasonable backlog) will be |
| - | published on the curl site, at https://curl.se/dev/builds.html |
| - | |
| - | \fIoptions\fP may be omitted. See \fI--setup\fP for what happens then. |
| - | |
| - | \fIdir\fP is a curl source dir, possibly a daily snapshot one. Using this will |
| - | make testcurl.pl skip the 'buildconf' stage and thus it removes the dependency |
| - | on automake, autoconf, libtool, GNU m4 and possibly a few other things. |
| - | |
| - | testcurl.pl will run 'buildconf' (or similar), run configure, build curl and |
| - | libcurl in a separate build directory and then run 'make test' to test the |
| - | fresh build. |
| - | .SH OPTIONS |
| - | .IP "--configure=[options]" |
| - | Configure options passed to configure. |
| - | .IP "--crosscompile" |
| - | This is a cross-compile. Makes \fItestcurl.pl\fP skip a few things. |
| - | .IP "--desc=[desc]" |
| - | Description of your test system. Displayed on the build summary page on the |
| - | weba site. |
| - | .IP "--email=[email]" |
| - | Set email address to report as. Displayed in the build logs on the site. |
| - | .IP "--mktarball=[command]" |
| - | Generic command to run after completed test. |
| - | .IP "--name=[name]" |
| - | Set name to report as. Displayed in the build summary on the site. |
| - | .IP "--nobuildconf" |
| - | Don't run buildconf. Useful when many builds use the same source tree, as then |
| - | only one need to do this. Also, if multiple processes run tests simultaneously |
| - | on the same source tree (like several hosts on a NFS mounted dir), |
| - | simultaneous buildconf invokes may cause problems. (Added in 7.14.1) |
| - | .IP "--nogitpull" |
| - | Don't update from git even though it is a git tree. Useful to still be able to |
| - | test even though your network is down, or similar. |
| - | .IP "--runtestopts=[options]" |
| - | Options that is passed to the runtests.pl script. Useful for disabling valgrind |
| - | by force, and similar. |
| - | .IP "--setup=[file name]" |
| - | File name to read setup from (deprecated). The old style of providing info. |
| - | If info is missing when testcurl.pl is started, it will prompt you and then |
| - | store the info in a 'setup' file, which it will look for on each invoke. Use |
| - | \fI--name\fP, \fI--email\fP, \fI--configure\fP and \fI--desc\fP instead. |
| - | .IP "--target=[your os]" |
| - | Specify your target environment. Recognized strings include 'vc', 'mingw32', |
| - | and \&'borland'. |
| - | .SH "INITIAL SETUP" |
| - | First you make a checkout from git (or you write a script that downloads daily |
| - | snapshots automatically, find inspiration in |
| - | https://curl.se/dev/autocurl.txt ): |
| - | |
| - | .nf |
| - | $ mkdir daily-curl |
| - | $ cd daily-curl |
| - | $ git clone https://github.com/curl/curl.git |
| - | .fi |
| - | |
| - | With the curl sources checked out, or downloaded, you can start testing right |
| - | away. If you want to use \fItestcurl.pl\fP without command line arguments and |
| - | to have it store and remember the config in its 'setup' file, then start it |
| - | manually now and fill in the answers to the questions it prompts you for: |
| - | |
| - | .nf |
| - | $ ./curl/tests/testcurl.pl |
| - | .fi |
| - | |
| - | Now you are ready to go. If you let the script run, it will perform a full |
| - | cycle and spit out lots of output. Mail us that output as described above. |
| - | .SH "CRONTAB EXAMPLE" |
| - | The crontab could include something like this: |
| - | |
| - | .nf |
| - | \# autobuild curl: |
| - | 0 4 * * * cd daily-curl && ./testit.sh |
| - | .fi |
| - | |
| - | Where testit.sh is a shell script that could look similar to this: |
| - | |
| - | .nf |
| - | mail="mail -s autobuild [email protected]" |
| - | name="--name=whoami" |
| - | email="--email=iamme@nowhere" |
| - | desc='"--desc=supermachine Turbo 2000"' |
| - | testprog="perl ./curl/tests/testcurl.pl $name $email $desc" |
| - | opts1="--configure=--enable-debug" |
| - | opts2="--configure=--enable-ipv6" |
| - | |
| - | # run first test |
| - | $testprog $opts1 | $mail |
| - | |
| - | # run second test |
| - | $testprog $opts2 | $mail |
| @@ -0,0 +1,137 @@ | |
| + | --- |
| + | c: Copyright (C) Daniel Stenberg, <daniel.se>, et al. |
| + | SPDX-License-Identifier: curl |
| + | Title: testcurl.pl |
| + | Section: 1 |
| + | Source: testcurl |
| + | See-also: |
| + | - runtests.pl |
| + | Added-in: 7.11.2 |
| + | --- |
| + | |
| + | # NAME |
| + | |
| + | testcurl.pl - (automatically) test curl |
| + | |
| + | # SYNOPSIS |
| + | |
| + | **testcurl.pl [options] [dir] \> output** |
| + | |
| + | # DESCRIPTION |
| + | |
| + | *testcurl* is the master script to use for automatic distributed testing of |
| + | curl from git or daily snapshots. It is written for the purpose of being run |
| + | from a crontab job or similar at a regular interval. The output is suitable to |
| + | be mailed to **[email protected]** to be dealt with automatically (make |
| + | sure the subject includes the word "autobuild" as the mail gets silently |
| + | discarded otherwise). The most current build status (with a reasonable |
| + | backlog) will be published on the curl site, at |
| + | https://curl.se/dev/builds.html |
| + | |
| + | *options* may be omitted. See *--setup* for what happens then. |
| + | |
| + | *dir* is a curl source dir, possibly a daily snapshot one. Using this will |
| + | make *testcurl* skip the 'buildconf' stage and thus it removes the dependency |
| + | on automake, autoconf, libtool, GNU m4 and possibly a few other things. |
| + | |
| + | *testcurl* runs `buildconf` (or similar), configure, builds curl and libcurl |
| + | in a separate build directory and then runs `make test` to test the fresh |
| + | build. |
| + | |
| + | # OPTIONS |
| + | |
| + | ## `--configure=[options]` |
| + | |
| + | Configure options passed to configure. |
| + | |
| + | ## `--crosscompile` |
| + | `` |
| + | This is a cross-compile. Makes *testcurl* skip a few things. |
| + | |
| + | ## `--desc=[desc]` |
| + | |
| + | Description of your test system. Displayed on the build summary page on the |
| + | website. |
| + | |
| + | ## `--email=[email]` |
| + | |
| + | Set email address to report as. Displayed in the build logs on the site. |
| + | |
| + | ## `--mktarball=[command]` |
| + | |
| + | Generic command to run after completed test. |
| + | |
| + | ## `--name=[name]` |
| + | |
| + | Set name to report as. Displayed in the build summary on the site. |
| + | |
| + | ## `--nobuildconf` |
| + | |
| + | Don't run buildconf. Useful when many builds use the same source tree, as then |
| + | only one need to do this. Also, if multiple processes run tests simultaneously |
| + | on the same source tree (like several hosts on a NFS mounted dir), |
| + | simultaneous buildconf invokes may cause problems. (Added in 7.14.1) |
| + | |
| + | ## `--nogitpull` |
| + | |
| + | Don't update from git even though it is a git tree. Useful to still be able to |
| + | test even though your network is down, or similar. |
| + | |
| + | ## `--runtestopts=[options]` |
| + | |
| + | Options that is passed to the runtests script. Useful for disabling valgrind |
| + | by force, and similar. |
| + | |
| + | ## `--setup=[file name]` |
| + | |
| + | File name to read setup from (deprecated). The old style of providing info. |
| + | If info is missing when *testcurl* is started, it will prompt you and then |
| + | store the info in a 'setup' file, which it will look for on each invoke. Use |
| + | *--name*, *--email*, *--configure* and *--desc* instead. |
| + | |
| + | ## `--target=[your os]` |
| + | |
| + | Specify your target environment. Recognized strings include `vc`, `mingw32`, |
| + | and `borland`. |
| + | |
| + | # INITIAL SETUP |
| + | |
| + | First, make a checkout from git (or you write a script that downloads daily |
| + | snapshots automatically): |
| + | |
| + | $ mkdir curl-testing |
| + | $ cd curl-testing |
| + | $ git clone https://github.com/curl/curl.git |
| + | |
| + | With the curl sources checked out, or downloaded, you can start testing right |
| + | away. If you want to use *testcurl* without command line arguments and to have |
| + | it store and remember the config in its 'setup' file, then start it manually |
| + | now and fill in the answers to the questions it prompts you for: |
| + | |
| + | $ ./curl/tests/testcurl |
| + | |
| + | Now you are ready to go. If you let the script run, it will perform a full |
| + | cycle and spit out lots of output. Mail us that output as described above. |
| + | |
| + | # CRONTAB EXAMPLE |
| + | |
| + | The crontab could include something like this: |
| + | |
| + | # autobuild curl: |
| + | 0 4 * * * cd curl-testing && ./testit.sh |
| + | |
| + | Where `testit.sh` is a shell script that could look similar to this: |
| + | |
| + | mail="mail -s autobuild [email protected]" |
| + | name="--name=whoami" |
| + | email="--email=iamme@nowhere" |
| + | desc='"--desc=supermachine Turbo 2000"' |
| + | testprog="perl ./curl/tests/testcurl.pl $name $email $desc" |
| + | opts1="--configure=--enable-debug" |
| + | opts2="--configure=--enable-ipv6" |
| + | |
| + | # run first test |
| + | $testprog $opts1 | $mail |
| + | |
| + | # run second test |
| + | $testprog $opts2 | $mail |