docs: grammar proofread, typo fixes
—
$ git checkout -f b341b7675b8f5f2ee8a1eaa149bc1f33b6cf8dd3
Previous HEAD position was 40a63419eb RELEASE-NOTES: synced
HEAD is now at b341b7675b docs: grammar proofread, typo fixes
$ git clean -fdx
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing curl-config
Removing depcomp
Removing docs/Makefile
Removing docs/Makefile.in
Removing docs/cmdline-opts/Makefile
Removing docs/cmdline-opts/Makefile.in
Removing docs/curl.1
Removing docs/examples/.deps/
Removing docs/examples/Makefile
Removing docs/examples/Makefile.in
Removing docs/libcurl/Makefile
Removing docs/libcurl/Makefile.in
Removing docs/libcurl/opts/Makefile
Removing docs/libcurl/opts/Makefile.in
Removing include/Makefile
Removing include/Makefile.in
Removing include/curl/Makefile
Removing include/curl/Makefile.in
Removing install-sh
Removing lib/.deps/
Removing lib/.dirstamp
Removing lib/.libs/
Removing lib/Makefile
Removing lib/Makefile.in
Removing lib/curl_config.h
Removing lib/curl_config.h.in
Removing lib/curl_ctype.o
Removing lib/curl_multibyte.o
Removing lib/dynbuf.o
Removing lib/libcurl.la
Removing lib/libcurl.vers
Removing lib/libcurl_la-altsvc.lo
Removing lib/libcurl_la-altsvc.o
Removing lib/libcurl_la-amigaos.lo
Removing lib/libcurl_la-amigaos.o
Removing lib/libcurl_la-asyn-ares.lo
Removing lib/libcurl_la-asyn-ares.o
Removing lib/libcurl_la-asyn-thread.lo
Removing lib/libcurl_la-asyn-thread.o
Removing lib/libcurl_la-base64.lo
Removing lib/libcurl_la-base64.o
Removing lib/libcurl_la-bufref.lo
Removing lib/libcurl_la-bufref.o
Removing lib/libcurl_la-c-hyper.lo
Removing lib/libcurl_la-c-hyper.o
Removing lib/libcurl_la-conncache.lo
Removing lib/libcurl_la-conncache.o
Removing lib/libcurl_la-connect.lo
Removing lib/libcurl_la-connect.o
Removing lib/libcurl_la-content_encoding.lo
Removing lib/libcurl_la-content_encoding.o
Removing lib/libcurl_la-cookie.lo
Removing lib/libcurl_la-cookie.o
Removing lib/libcurl_la-curl_addrinfo.lo
Removing lib/libcurl_la-curl_addrinfo.o
Removing lib/libcurl_la-curl_ctype.lo
Removing lib/libcurl_la-curl_ctype.o
Removing lib/libcurl_la-curl_des.lo
Removing lib/libcurl_la-curl_des.o
Removing lib/libcurl_la-curl_endian.lo
Removing lib/libcurl_la-curl_endian.o
Removing lib/libcurl_la-curl_fnmatch.lo
Removing lib/libcurl_la-curl_fnmatch.o
Removing lib/libcurl_la-curl_get_line.lo
Removing lib/libcurl_la-curl_get_line.o
Removing lib/libcurl_la-curl_gethostname.lo
Removing lib/libcurl_la-curl_gethostname.o
Removing lib/libcurl_la-curl_gssapi.lo
Removing lib/libcurl_la-curl_gssapi.o
Removing lib/libcurl_la-curl_memrchr.lo
Removing lib/libcurl_la-curl_memrchr.o
Removing lib/libcurl_la-curl_multibyte.lo
Removing lib/libcurl_la-curl_multibyte.o
Removing lib/libcurl_la-curl_ntlm_core.lo
Removing lib/libcurl_la-curl_ntlm_core.o
Removing lib/libcurl_la-curl_ntlm_wb.lo
Removing lib/libcurl_la-curl_ntlm_wb.o
Removing lib/libcurl_la-curl_path.lo
Removing lib/libcurl_la-curl_path.o
Removing lib/libcurl_la-curl_range.lo
Removing lib/libcurl_la-curl_range.o
Removing lib/libcurl_la-curl_rtmp.lo
Removing lib/libcurl_la-curl_rtmp.o
Removing lib/libcurl_la-curl_sasl.lo
Removing lib/libcurl_la-curl_sasl.o
Removing lib/libcurl_la-curl_sspi.lo
Removing lib/libcurl_la-curl_sspi.o
Removing lib/libcurl_la-curl_threads.lo
Removing lib/libcurl_la-curl_threads.o
Removing lib/libcurl_la-dict.lo
Removing lib/libcurl_la-dict.o
Removing lib/libcurl_la-doh.lo
Removing lib/libcurl_la-doh.o
Removing lib/libcurl_la-dotdot.lo
Removing lib/libcurl_la-dotdot.o
Removing lib/libcurl_la-dynbuf.lo
Removing lib/libcurl_la-dynbuf.o
Removing lib/libcurl_la-easy.lo
Removing lib/libcurl_la-easy.o
Removing lib/libcurl_la-easygetopt.lo
Removing lib/libcurl_la-easygetopt.o
Removing lib/libcurl_la-easyoptions.lo
Removing lib/libcurl_la-easyoptions.o
Removing lib/libcurl_la-escape.lo
Removing lib/libcurl_la-escape.o
Removing lib/libcurl_la-file.lo
Removing lib/libcurl_la-file.o
Removing lib/libcurl_la-fileinfo.lo
Removing lib/libcurl_la-fileinfo.o
Removing lib/libcurl_la-formdata.lo
Removing lib/libcurl_la-formdata.o
Removing lib/libcurl_la-ftp.lo
Removing lib/libcurl_la-ftp.o
Removing lib/libcurl_la-ftplistparser.lo
Removing lib/libcurl_la-ftplistparser.o
Removing lib/libcurl_la-getenv.lo
Removing lib/libcurl_la-getenv.o
Removing lib/libcurl_la-getinfo.lo
Removing lib/libcurl_la-getinfo.o
Removing lib/libcurl_la-gopher.lo
Removing lib/libcurl_la-gopher.o
Removing lib/libcurl_la-hash.lo
Removing lib/libcurl_la-hash.o
Removing lib/libcurl_la-hmac.lo
Removing lib/libcurl_la-hmac.o
Removing lib/libcurl_la-hostasyn.lo
Removing lib/libcurl_la-hostasyn.o
Removing lib/libcurl_la-hostcheck.lo
Removing lib/libcurl_la-hostcheck.o
Removing lib/libcurl_la-hostip.lo
Removing lib/libcurl_la-hostip.o
Removing lib/libcurl_la-hostip4.lo
Removing lib/libcurl_la-hostip4.o
Removing lib/libcurl_la-hostip6.lo
Removing lib/libcurl_la-hostip6.o
Removing lib/libcurl_la-hostsyn.lo
Removing lib/libcurl_la-hostsyn.o
Removing lib/libcurl_la-hsts.lo
Removing lib/libcurl_la-hsts.o
Removing lib/libcurl_la-http.lo
Removing lib/libcurl_la-http.o
Removing lib/libcurl_la-http2.lo
Removing lib/libcurl_la-http2.o
Removing lib/libcurl_la-http_aws_sigv4.lo
Removing lib/libcurl_la-http_aws_sigv4.o
Removing lib/libcurl_la-http_chunks.lo
Removing lib/libcurl_la-http_chunks.o
Removing lib/libcurl_la-http_digest.lo
Removing lib/libcurl_la-http_digest.o
Removing lib/libcurl_la-http_negotiate.lo
Removing lib/libcurl_la-http_negotiate.o
Removing lib/libcurl_la-http_ntlm.lo
Removing lib/libcurl_la-http_ntlm.o
Removing lib/libcurl_la-http_proxy.lo
Removing lib/libcurl_la-http_proxy.o
Removing lib/libcurl_la-idn_win32.lo
Removing lib/libcurl_la-idn_win32.o
Removing lib/libcurl_la-if2ip.lo
Removing lib/libcurl_la-if2ip.o
Removing lib/libcurl_la-imap.lo
Removing lib/libcurl_la-imap.o
Removing lib/libcurl_la-inet_ntop.lo
Removing lib/libcurl_la-inet_ntop.o
Removing lib/libcurl_la-inet_pton.lo
Removing lib/libcurl_la-inet_pton.o
Removing lib/libcurl_la-krb5.lo
Removing lib/libcurl_la-krb5.o
Removing lib/libcurl_la-ldap.lo
Removing lib/libcurl_la-ldap.o
Removing lib/libcurl_la-llist.lo
Removing lib/libcurl_la-llist.o
Removing lib/libcurl_la-md4.lo
Removing lib/libcurl_la-md4.o
Removing lib/libcurl_la-md5.lo
Removing lib/libcurl_la-md5.o
Removing lib/libcurl_la-memdebug.lo
Removing lib/libcurl_la-memdebug.o
Removing lib/libcurl_la-mime.lo
Removing lib/libcurl_la-mime.o
Removing lib/libcurl_la-mprintf.lo
Removing lib/libcurl_la-mprintf.o
Removing lib/libcurl_la-mqtt.lo
Removing lib/libcurl_la-mqtt.o
Removing lib/libcurl_la-multi.lo
Removing lib/libcurl_la-multi.o
Removing lib/libcurl_la-netrc.lo
Removing lib/libcurl_la-netrc.o
Removing lib/libcurl_la-non-ascii.lo
Removing lib/libcurl_la-non-ascii.o
Removing lib/libcurl_la-nonblock.lo
Removing lib/libcurl_la-nonblock.o
Removing lib/libcurl_la-openldap.lo
Removing lib/libcurl_la-openldap.o
Removing lib/libcurl_la-parsedate.lo
Removing lib/libcurl_la-parsedate.o
Removing lib/libcurl_la-pingpong.lo
Removing lib/libcurl_la-pingpong.o
Removing lib/libcurl_la-pop3.lo
Removing lib/libcurl_la-pop3.o
Removing lib/libcurl_la-progress.lo
Removing lib/libcurl_la-progress.o
Removing lib/libcurl_la-psl.lo
Removing lib/libcurl_la-psl.o
Removing lib/libcurl_la-rand.lo
Removing lib/libcurl_la-rand.o
Removing lib/libcurl_la-rename.lo
Removing lib/libcurl_la-rename.o
Removing lib/libcurl_la-rtsp.lo
Removing lib/libcurl_la-rtsp.o
Removing lib/libcurl_la-select.lo
Removing lib/libcurl_la-select.o
Removing lib/libcurl_la-sendf.lo
Removing lib/libcurl_la-sendf.o
Removing lib/libcurl_la-setopt.lo
Removing lib/libcurl_la-setopt.o
Removing lib/libcurl_la-sha256.lo
Removing lib/libcurl_la-sha256.o
Removing lib/libcurl_la-share.lo
Removing lib/libcurl_la-share.o
Removing lib/libcurl_la-slist.lo
Removing lib/libcurl_la-slist.o
Removing lib/libcurl_la-smb.lo
Removing lib/libcurl_la-smb.o
Removing lib/libcurl_la-smtp.lo
Removing lib/libcurl_la-smtp.o
Removing lib/libcurl_la-socketpair.lo
Removing lib/libcurl_la-socketpair.o
Removing lib/libcurl_la-socks.lo
Removing lib/libcurl_la-socks.o
Removing lib/libcurl_la-socks_gssapi.lo
Removing lib/libcurl_la-socks_gssapi.o
Removing lib/libcurl_la-socks_sspi.lo
Removing lib/libcurl_la-socks_sspi.o
Removing lib/libcurl_la-speedcheck.lo
Removing lib/libcurl_la-speedcheck.o
Removing lib/libcurl_la-splay.lo
Removing lib/libcurl_la-splay.o
Removing lib/libcurl_la-strcase.lo
Removing lib/libcurl_la-strcase.o
Removing lib/libcurl_la-strdup.lo
Removing lib/libcurl_la-strdup.o
Removing lib/libcurl_la-strerror.lo
Removing lib/libcurl_la-strerror.o
Removing lib/libcurl_la-strtok.lo
Removing lib/libcurl_la-strtok.o
Removing lib/libcurl_la-strtoofft.lo
Removing lib/libcurl_la-strtoofft.o
Removing lib/libcurl_la-system_win32.lo
Removing lib/libcurl_la-system_win32.o
Removing lib/libcurl_la-telnet.lo
Removing lib/libcurl_la-telnet.o
Removing lib/libcurl_la-tftp.lo
Removing lib/libcurl_la-tftp.o
Removing lib/libcurl_la-timeval.lo
Removing lib/libcurl_la-timeval.o
Removing lib/libcurl_la-transfer.lo
Removing lib/libcurl_la-transfer.o
Removing lib/libcurl_la-url.lo
Removing lib/libcurl_la-url.o
Removing lib/libcurl_la-urlapi.lo
Removing lib/libcurl_la-urlapi.o
Removing lib/libcurl_la-version.lo
Removing lib/libcurl_la-version.o
Removing lib/libcurl_la-version_win32.lo
Removing lib/libcurl_la-version_win32.o
Removing lib/libcurl_la-warnless.lo
Removing lib/libcurl_la-warnless.o
Removing lib/libcurl_la-wildcard.lo
Removing lib/libcurl_la-wildcard.o
Removing lib/libcurl_la-x509asn1.lo
Removing lib/libcurl_la-x509asn1.o
Removing lib/nonblock.o
Removing lib/stamp-h1
Removing lib/strtoofft.o
Removing lib/vauth/.deps/
Removing lib/vauth/.dirstamp
Removing lib/vauth/libcurl_la-cleartext.lo
Removing lib/vauth/libcurl_la-cleartext.o
Removing lib/vauth/libcurl_la-cram.lo
Removing lib/vauth/libcurl_la-cram.o
Removing lib/vauth/libcurl_la-digest.lo
Removing lib/vauth/libcurl_la-digest.o
Removing lib/vauth/libcurl_la-digest_sspi.lo
Removing lib/vauth/libcurl_la-digest_sspi.o
Removing lib/vauth/libcurl_la-gsasl.lo
Removing lib/vauth/libcurl_la-gsasl.o
Removing lib/vauth/libcurl_la-krb5_gssapi.lo
Removing lib/vauth/libcurl_la-krb5_gssapi.o
Removing lib/vauth/libcurl_la-krb5_sspi.lo
Removing lib/vauth/libcurl_la-krb5_sspi.o
Removing lib/vauth/libcurl_la-ntlm.lo
Removing lib/vauth/libcurl_la-ntlm.o
Removing lib/vauth/libcurl_la-ntlm_sspi.lo
Removing lib/vauth/libcurl_la-ntlm_sspi.o
Removing lib/vauth/libcurl_la-oauth2.lo
Removing lib/vauth/libcurl_la-oauth2.o
Removing lib/vauth/libcurl_la-spnego_gssapi.lo
Removing lib/vauth/libcurl_la-spnego_gssapi.o
Removing lib/vauth/libcurl_la-spnego_sspi.lo
Removing lib/vauth/libcurl_la-spnego_sspi.o
Removing lib/vauth/libcurl_la-vauth.lo
Removing lib/vauth/libcurl_la-vauth.o
Removing lib/version_win32.o
Removing lib/vquic/.deps/
Removing lib/vquic/.dirstamp
Removing lib/vquic/libcurl_la-ngtcp2.lo
Removing lib/vquic/libcurl_la-ngtcp2.o
Removing lib/vquic/libcurl_la-quiche.lo
Removing lib/vquic/libcurl_la-quiche.o
Removing lib/vquic/libcurl_la-vquic.lo
Removing lib/vquic/libcurl_la-vquic.o
Removing lib/vssh/.deps/
Removing lib/vssh/.dirstamp
Removing lib/vssh/libcurl_la-libssh.lo
Removing lib/vssh/libcurl_la-libssh.o
Removing lib/vssh/libcurl_la-libssh2.lo
Removing lib/vssh/libcurl_la-libssh2.o
Removing lib/vssh/libcurl_la-wolfssh.lo
Removing lib/vssh/libcurl_la-wolfssh.o
Removing lib/vtls/.deps/
Removing lib/vtls/.dirstamp
Removing lib/vtls/libcurl_la-bearssl.lo
Removing lib/vtls/libcurl_la-bearssl.o
Removing lib/vtls/libcurl_la-gskit.lo
Removing lib/vtls/libcurl_la-gskit.o
Removing lib/vtls/libcurl_la-gtls.lo
Removing lib/vtls/libcurl_la-gtls.o
Removing lib/vtls/libcurl_la-keylog.lo
Removing lib/vtls/libcurl_la-keylog.o
Removing lib/vtls/libcurl_la-mbedtls.lo
Removing lib/vtls/libcurl_la-mbedtls.o
Removing lib/vtls/libcurl_la-mbedtls_threadlock.lo
Removing lib/vtls/libcurl_la-mbedtls_threadlock.o
Removing lib/vtls/libcurl_la-nss.lo
Removing lib/vtls/libcurl_la-nss.o
Removing lib/vtls/libcurl_la-openssl.lo
Removing lib/vtls/libcurl_la-openssl.o
Removing lib/vtls/libcurl_la-rustls.lo
Removing lib/vtls/libcurl_la-rustls.o
Removing lib/vtls/libcurl_la-schannel.lo
Removing lib/vtls/libcurl_la-schannel.o
Removing lib/vtls/libcurl_la-schannel_verify.lo
Removing lib/vtls/libcurl_la-schannel_verify.o
Removing lib/vtls/libcurl_la-sectransp.lo
Removing lib/vtls/libcurl_la-sectransp.o
Removing lib/vtls/libcurl_la-vtls.lo
Removing lib/vtls/libcurl_la-vtls.o
Removing lib/vtls/libcurl_la-wolfssl.lo
Removing lib/vtls/libcurl_la-wolfssl.o
Removing lib/warnless.o
Removing libcurl.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing packages/Makefile
Removing packages/Makefile.in
Removing packages/vms/Makefile
Removing packages/vms/Makefile.in
Removing scripts/Makefile
Removing scripts/Makefile.in
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/curl
Removing src/slist_wc.o
Removing src/tool_binmode.o
Removing src/tool_bname.o
Removing src/tool_cb_dbg.o
Removing src/tool_cb_hdr.o
Removing src/tool_cb_prg.o
Removing src/tool_cb_rea.o
Removing src/tool_cb_see.o
Removing src/tool_cb_wrt.o
Removing src/tool_cfgable.o
Removing src/tool_convert.o
Removing src/tool_dirhie.o
Removing src/tool_doswin.o
Removing src/tool_easysrc.o
Removing src/tool_filetime.o
Removing src/tool_findfile.o
Removing src/tool_formparse.o
Removing src/tool_getparam.o
Removing src/tool_getpass.o
Removing src/tool_help.o
Removing src/tool_helpers.o
Removing src/tool_hugehelp.c
Removing src/tool_hugehelp.o
Removing src/tool_libinfo.o
Removing src/tool_listhelp.o
Removing src/tool_main.o
Removing src/tool_msgs.o
Removing src/tool_operate.o
Removing src/tool_operhlp.o
Removing src/tool_panykey.o
Removing src/tool_paramhlp.o
Removing src/tool_parsecfg.o
Removing src/tool_progress.o
Removing src/tool_setopt.o
Removing src/tool_sleep.o
Removing src/tool_strdup.o
Removing src/tool_urlglob.o
Removing src/tool_util.o
Removing src/tool_vms.o
Removing src/tool_writeout.o
Removing src/tool_writeout_json.o
Removing src/tool_xattr.o
Removing test-driver
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/certs/Makefile
Removing tests/certs/Makefile.in
Removing tests/certs/scripts/Makefile
Removing tests/certs/scripts/Makefile.in
Removing tests/configurehelp.pm
Removing tests/data/Makefile
Removing tests/data/Makefile.in
Removing tests/libtest/.deps/
Removing tests/libtest/Makefile
Removing tests/libtest/Makefile.in
Removing tests/server/.deps/
Removing tests/server/Makefile
Removing tests/server/Makefile.in
Removing tests/unit/.deps/
Removing tests/unit/Makefile
Removing tests/unit/Makefile.in
$ autoreconf -fi
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Remember to add 'LT_INIT' to configure.ac.
configure.ac:120: installing './compile'
configure.ac:302: installing './config.guess'
configure.ac:302: installing './config.sub'
configure.ac:120: installing './install-sh'
configure.ac:125: installing './missing'
docs/examples/Makefile.am: installing './depcomp'
parallel-tests: installing './test-driver'
$ bash -c find . -name config.guess -exec cp /usr/share/misc/config.guess {} \;
$ bash -c find . -name config.sub -exec cp /usr/share/misc/config.sub {} \;
$ chmod +x configure
$ ./configure --disable-shared --without-ssl --disable-docs
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable ECH support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... ccache gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether ccache gcc accepts -g... yes
checking for ccache gcc option to enable C11 features... none needed
checking whether ccache gcc understands -c and -o together... yes
checking how to run the C preprocessor... ccache gcc -E
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of ccache gcc... gcc3
checking curl version... 7.82.0-DEV
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defined... no
checking if _THREAD_SAFE is actually needed... no
checking if _THREAD_SAFE is onwards defined... no
checking if _REENTRANT is already defined... no
checking if _REENTRANT is actually needed... no
checking if _REENTRANT is onwards defined... no
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking how to print strings... printf
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for fgrep... /usr/bin/grep -F
checking for ld used by ccache gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from ccache gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if ccache gcc supports -fno-rtti -fno-exceptions... no
checking for ccache gcc option to produce PIC... -fPIC -DPIC
checking if ccache gcc PIC flag -fPIC -DPIC works... yes
checking if ccache gcc static flag -static works... yes
checking if ccache gcc supports -c -o file.o... yes
checking if ccache gcc supports -c -o file.o... (cached) yes
checking whether the ccache gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether to build shared libraries with -version-info... yes
checking whether to build shared libraries with -no-undefined... no
checking whether to build shared libraries with -mimpure-text... no
checking whether to build shared libraries with PIC... yes
checking whether to build static libraries with PIC... yes
checking whether to build shared libraries only... no
checking whether to build static libraries only... yes
checking for inline... inline
checking if cpp -P is needed... yes
checking if cpp -P works... yes
checking if compiler is DEC/Compaq/HP C... no
checking if compiler is HP-UX C... no
checking if compiler is IBM C... no
checking if compiler is Intel C... no
checking if compiler is clang... no
checking if compiler is GNU C... yes
checking if compiler is LCC... no
checking if compiler is SGI MIPSpro C... no
checking if compiler is SGI MIPS C... no
checking if compiler is SunPro C... no
checking if compiler is Tiny C... no
checking if compiler accepts some basic options... yes
configure: compiler options added: -Werror-implicit-function-declaration
checking if compiler optimizer assumed setting might be used... yes
checking if compiler accepts optimizer enabling options... yes
configure: compiler options added: -O2
checking if compiler accepts strict warning options... yes
configure: compiler options added: -Wno-system-headers
checking if compiler halts on compilation errors... yes
checking if compiler halts on negative sized arrays... yes
checking if compiler halts on function prototype mismatch... yes
checking if compiler supports hiding library internal symbols... yes
checking for windows.h... no
checking whether build target is a native Windows one... no
checking whether build target supports WIN32 file API... no
checking whether build target supports WIN32 crypto API... no
checking for good-to-use Darwin CFLAGS... no
checking whether to link macOS CoreFoundation and SystemConfiguration framework... no
checking to see if the compiler supports __builtin_available()... no
checking whether to support http... yes
checking whether to support ftp... yes
checking whether to support file... yes
checking whether to support ldap... yes
checking whether to support ldaps... yes
checking whether to support rtsp... yes
checking whether to support proxies... yes
checking whether to support dict... yes
checking whether to support telnet... yes
checking whether to support tftp... yes
checking whether to support pop3... yes
checking whether to support imap... yes
checking whether to support smb... yes
checking whether to support smtp... yes
checking whether to support gopher... yes
checking whether to support mqtt... no
checking whether to provide built-in manual... yes
checking whether to enable generation of C code... yes
checking whether to use libgcc... no
checking if X/Open network library is required... no
checking for gethostbyname... yes
checking for windows.h... (cached) no
checking for winsock2.h... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for pkg-config... /usr/bin/pkg-config
checking for zlib options with pkg-config... found
checking for zlib.h... yes
configure: found both libz and libz.h header
checking for BrotliDecoderDecompress in -lbrotlidec... no
checking for brotli/decode.h... no
checking for ZSTD_createDStream in -lzstd... no
checking for zstd.h... no
checking for lber.h... no
checking for ldap.h... no
checking for ldapssl.h... no
checking for ldap_ssl.h... no
checking for LDAP libraries... cannot find LDAP libraries
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... yes
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Secure Transport... no
checking whether to enable Amiga native SSL/TLS (AmiSSL)... no
checking for library containing psl_builtin... -lpsl
checking for library containing gsasl_init... no
checking for RTMP_Init in -lrtmp... no
checking whether versioned symbols are wanted... no
checking whether to enable Windows native IDN (Windows native builds only)... no
checking whether to build with libidn2... (assumed) yes
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libidn2 options with pkg-config... no
configure: IDN_LIBS: "-lidn2"
configure: IDN_LDFLAGS: ""
configure: IDN_CPPFLAGS: ""
configure: IDN_DIR: ""
checking if idn2_lookup_ul can be linked... no
checking for idn2.h... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libnghttp2 options with pkg-config... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libngtcp2 options with pkg-config... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for fish options with pkg-config... no
checking for malloc.h... yes
checking for memory.h... no
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for sys/select.h... yes
checking for sys/socket.h... yes
checking for sys/ioctl.h... yes
checking for sys/uio.h... yes
checking for assert.h... yes
checking for unistd.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for arpa/inet.h... yes
checking for net/if.h... yes
checking for netinet/in.h... yes
checking for netinet/in6.h... no
checking for sys/un.h... yes
checking for linux/tcp.h... yes
checking for netinet/tcp.h... yes
checking for netdb.h... yes
checking for sys/sockio.h... no
checking for sys/stat.h... (cached) yes
checking for sys/param.h... yes
checking for termios.h... yes
checking for termio.h... yes
checking for fcntl.h... yes
checking for alloca.h... yes
checking for io.h... no
checking for pwd.h... yes
checking for utime.h... yes
checking for sys/utime.h... no
checking for sys/poll.h... yes
checking for poll.h... yes
checking for socket.h... no
checking for sys/resource.h... yes
checking for libgen.h... yes
checking for locale.h... yes
checking for errno.h... yes
checking for stdbool.h... yes
checking for arpa/tftp.h... yes
checking for sys/filio.h... no
checking for sys/wait.h... yes
checking for setjmp.h... yes
checking for an ANSI C-conforming const... yes
checking for compiler support of C99 variadic macro style... yes
checking for compiler support of old gcc variadic macro style... yes
checking for size_t... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for struct timeval... yes
checking run-time libs availability... fine
checking size of size_t... 8
checking size of long... 8
checking size of int... 4
checking size of short... 2
checking size of time_t... 8
checking size of off_t... 8
checking size of curl_off_t... 8
checking for long long... yes
checking if numberLL works... yes
checking for ssize_t... yes
checking for bool... yes
checking for sa_family_t... yes
checking for suseconds_t... yes
checking if time_t is unsigned... no
checking for sys/types.h... (cached) yes
checking for poll.h... (cached) yes
checking for sys/poll.h... (cached) yes
checking for in_addr_t... yes
checking for struct sockaddr_storage... yes
checking for sys/select.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for select... yes
checking types of args and return type for select... int,fd_set *,struct timeval *,int
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for recv... yes
checking types of args and return type for recv... int,void *,size_t,int,ssize_t
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for send... yes
checking types of args and return type for send... int,const void *,size_t,int,ssize_t
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for MSG_NOSIGNAL... yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking if alarm can be linked... yes
checking if alarm is prototyped... yes
checking if alarm is compilable... yes
checking if alarm usage allowed... yes
checking if alarm might be used... yes
checking for sys/types.h... (cached) yes
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
checking for sys/types.h... (cached) yes
checking for libgen.h... (cached) yes
checking if basename can be linked... yes
checking if basename is prototyped... yes
checking if basename is compilable... yes
checking if basename usage allowed... yes
checking if basename might be used... yes
checking for sys/types.h... (cached) yes
checking for socket.h... (cached) no
checking if closesocket can be linked... no
checking if closesocket might be used... no
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking if CloseSocket can be linked... no
checking if CloseSocket might be used... no
checking if connect can be linked... yes
checking if connect is prototyped... yes
checking if connect is compilable... yes
checking if connect usage allowed... yes
checking if connect might be used... yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking for fcntl.h... (cached) yes
checking if fcntl can be linked... yes
checking if fcntl is prototyped... yes
checking if fcntl is compilable... yes
checking if fcntl usage allowed... yes
checking if fcntl might be used... yes
checking if fcntl O_NONBLOCK is compilable... yes
checking if fcntl O_NONBLOCK usage allowed... yes
checking if fcntl O_NONBLOCK might be used... yes
checking for windows.h... (cached) no
checking for winsock2.h... (cached) no
checking for ws2tcpip.h... (cached) no
checking for sys/types.h... (cached) yes
checking for netdb.h... (cached) yes
checking if freeaddrinfo can be linked... yes
checking if freeaddrinfo is prototyped... yes
checking if freeaddrinfo is compilable... yes
checking if freeaddrinfo usage allowed... yes
checking if freeaddrinfo might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/xattr.h... yes
checking if fsetxattr can be linked... yes
checking if fsetxattr is prototyped... yes
checking if fsetxattr takes 5 args.... yes
checking if fsetxattr is compilable... yes
checking if fsetxattr usage allowed... yes
checking if fsetxattr might be used... yes
checking if ftruncate can be linked... yes
checking if ftruncate is prototyped... yes
checking if ftruncate is compilable... yes
checking if ftruncate usage allowed... yes
checking if ftruncate might be used... yes
checking for sys/types.h... (cached) yes
checking for stdlib.h... (cached) yes
checking if getaddrinfo can be linked... yes
checking if getaddrinfo is prototyped... yes
checking if getaddrinfo is compilable... yes
checking if getaddrinfo seems to work... yes
checking if getaddrinfo usage allowed... yes
checking if getaddrinfo might be used... yes
checking if getaddrinfo is threadsafe... yes
checking if gethostbyname can be linked... yes
checking if gethostbyname is prototyped... yes
checking if gethostbyname is compilable... yes
checking if gethostbyname usage allowed... yes
checking if gethostbyname might be used... yes
checking if gethostbyname_r can be linked... yes
checking if gethostbyname_r is prototyped... yes
checking if gethostbyname_r takes 3 args.... no
checking if gethostbyname_r takes 5 args.... no
checking if gethostbyname_r takes 6 args.... yes
checking if gethostbyname_r is compilable... yes
checking if gethostbyname_r usage allowed... yes
checking if gethostbyname_r might be used... yes
checking if gethostname can be linked... yes
checking if gethostname is prototyped... yes
checking if gethostname is compilable... yes
checking for gethostname arg 2 data type... size_t
checking if gethostname usage allowed... yes
checking if gethostname might be used... yes
checking if getpeername can be linked... yes
checking if getpeername is prototyped... yes
checking if getpeername is compilable... yes
checking if getpeername usage allowed... yes
checking if getpeername might be used... yes
checking if getsockname can be linked... yes
checking if getsockname is prototyped... yes
checking if getsockname is compilable... yes
checking if getsockname usage allowed... yes
checking if getsockname might be used... yes
checking for net/if.h... (cached) yes
checking if if_nametoindex can be linked... yes
checking if if_nametoindex is prototyped... yes
checking if if_nametoindex is compilable... yes
checking if if_nametoindex usage allowed... yes
checking if if_nametoindex might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for netinet/in.h... (cached) yes
checking for ifaddrs.h... yes
checking if getifaddrs can be linked... yes
checking if getifaddrs is prototyped... yes
checking if getifaddrs is compilable... yes
checking if getifaddrs seems to work... yes
checking if getifaddrs usage allowed... yes
checking if getifaddrs might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking if gmtime_r can be linked... yes
checking if gmtime_r is prototyped... yes
checking if gmtime_r is compilable... yes
checking if gmtime_r seems to work... yes
checking if gmtime_r usage allowed... yes
checking if gmtime_r might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for netinet/in.h... (cached) yes
checking for arpa/inet.h... (cached) yes
checking if inet_ntop can be linked... yes
checking if inet_ntop is prototyped... yes
checking if inet_ntop is compilable... yes
checking if inet_ntop seems to work... yes
checking if inet_ntop usage allowed... yes
checking if inet_ntop might be used... yes
checking if inet_pton can be linked... yes
checking if inet_pton is prototyped... yes
checking if inet_pton is compilable... yes
checking if inet_pton seems to work... yes
checking if inet_pton usage allowed... yes
checking if inet_pton might be used... yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for sys/ioctl.h... (cached) yes
checking for stropts.h... no
checking if ioctl can be linked... yes
checking if ioctl is prototyped... yes
checking if ioctl is compilable... yes
checking if ioctl usage allowed... yes
checking if ioctl might be used... yes
checking if ioctl FIONBIO is compilable... yes
checking if ioctl FIONBIO usage allowed... yes
checking if ioctl FIONBIO might be used... yes
checking if ioctl SIOCGIFADDR is compilable... yes
checking if ioctl SIOCGIFADDR usage allowed... yes
checking if ioctl SIOCGIFADDR might be used... yes
checking if ioctlsocket can be linked... no
checking if ioctlsocket might be used... no
checking if IoctlSocket can be linked... no
checking if IoctlSocket might be used... no
checking if localtime_r can be linked... yes
checking if localtime_r is prototyped... yes
checking if localtime_r is compilable... yes
checking if localtime_r seems to work... yes
checking if localtime_r usage allowed... yes
checking if localtime_r might be used... yes
checking if memrchr can be linked... yes
checking if memrchr is prototyped... no
checking if memrchr might be used... no
checking if poll can be linked... yes
checking if poll is prototyped... yes
checking if poll is compilable... yes
checking if poll seems to work... yes
checking if poll usage allowed... yes
checking if poll might be used... yes
checking if setsockopt can be linked... yes
checking if setsockopt is prototyped... yes
checking if setsockopt is compilable... yes
checking if setsockopt usage allowed... yes
checking if setsockopt might be used... yes
checking if setsockopt SO_NONBLOCK is compilable... no
checking if setsockopt SO_NONBLOCK might be used... no
checking for sys/types.h... (cached) yes
checking for signal.h... yes
checking if sigaction can be linked... yes
checking if sigaction is prototyped... yes
checking if sigaction is compilable... yes
checking if sigaction usage allowed... yes
checking if sigaction might be used... yes
checking if siginterrupt can be linked... yes
checking if siginterrupt is prototyped... yes
checking if siginterrupt is compilable... yes
checking if siginterrupt usage allowed... yes
checking if siginterrupt might be used... yes
checking if signal can be linked... yes
checking if signal is prototyped... yes
checking if signal is compilable... yes
checking if signal usage allowed... yes
checking if signal might be used... yes
checking for sys/types.h... (cached) yes
checking for setjmp.h... (cached) yes
checking if sigsetjmp can be linked... no
checking if sigsetjmp seems a macro... yes
checking if sigsetjmp is compilable... yes
checking if sigsetjmp usage allowed... yes
checking if sigsetjmp might be used... yes
checking if socket can be linked... yes
checking if socket is prototyped... yes
checking if socket is compilable... yes
checking if socket usage allowed... yes
checking if socket might be used... yes
checking if socketpair can be linked... yes
checking if socketpair is prototyped... yes
checking if socketpair is compilable... yes
checking if socketpair usage allowed... yes
checking if socketpair might be used... yes
checking if strcasecmp can be linked... yes
checking if strcasecmp is prototyped... yes
checking if strcasecmp is compilable... yes
checking if strcasecmp usage allowed... yes
checking if strcasecmp might be used... yes
checking if strcmpi can be linked... no
checking if strcmpi might be used... no
checking if strdup can be linked... yes
checking if strdup is prototyped... yes
checking if strdup is compilable... yes
checking if strdup usage allowed... yes
checking if strdup might be used... yes
checking if strerror_r can be linked... yes
checking if strerror_r is prototyped... yes
checking if strerror_r is compilable... yes
checking if strerror_r is glibc like... no
checking if strerror_r is POSIX like... yes
checking if strerror_r seems to work... yes
checking if strerror_r usage allowed... yes
checking if strerror_r might be used... yes
checking if stricmp can be linked... no
checking if stricmp might be used... no
checking if strncmpi can be linked... no
checking if strncmpi might be used... no
checking if strnicmp can be linked... no
checking if strnicmp might be used... no
checking if strstr can be linked... yes
checking if strstr is prototyped... yes
checking if strstr is compilable... yes
checking if strstr usage allowed... yes
checking if strstr might be used... yes
checking if strtok_r can be linked... yes
checking if strtok_r is prototyped... yes
checking if strtok_r is compilable... yes
checking if strtok_r usage allowed... yes
checking if strtok_r might be used... yes
checking if strtoll can be linked... yes
checking if strtoll is prototyped... yes
checking if strtoll is compilable... yes
checking if strtoll usage allowed... yes
checking if strtoll might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/uio.h... (cached) yes
checking if writev can be linked... yes
checking if writev is prototyped... yes
checking if writev is compilable... yes
checking if writev usage allowed... yes
checking if writev might be used... yes
checking for ccache gcc options needed to detect all undeclared functions... none needed
checking whether getpwuid_r is declared... yes
checking for fnmatch... yes
checking for geteuid... yes
checking for getpass_r... no
checking deeper for getpass_r... but still no
checking for getppid... yes
checking for getpwuid... yes
checking for getpwuid_r... yes
checking for getrlimit... yes
checking for gettimeofday... yes
checking for if_nametoindex... yes
checking for mach_absolute_time... no
checking deeper for mach_absolute_time... but still no
checking for pipe... yes
checking for setlocale... yes
checking for setmode... no
checking deeper for setmode... but still no
checking for setrlimit... yes
checking for usleep... yes
checking for utime... yes
checking for utimes... yes
checking how to set a socket into non-blocking mode... fcntl O_NONBLOCK
checking for perl... /usr/bin/perl
checking for gnroff... no
checking for nroff... /usr/bin/nroff
checking how to use *nroff to get plain text from man pages... -man
checking whether to enable the threaded resolver... yes
checking whether to use POSIX threads for threaded resolver... auto
checking for pthread.h... yes
checking for pthread_create... yes
checking convert -I options to -isystem... yes
checking whether to enable verbose strings... yes
checking whether to enable SSPI support (Windows native builds only)... no
checking whether to enable cryptographic authentication methods... yes
checking whether to support NTLM... yes
checking whether to enable NTLM delegation to winbind's helper... no
checking whether to enable TLS-SRP authentication... yes
checking whether to enable Unix domain sockets... auto
checking for struct sockaddr_un.sun_path... yes
checking whether to support cookies... yes
checking whether to support socketpair... yes
checking whether to support HTTP authentication... yes
checking whether to support DoH... yes
checking whether to support the MIME API... yes
checking whether to support date parsing... yes
checking whether to support netrc parsing... yes
checking whether to support progress-meter... yes
checking whether to support DNS shuffling... yes
checking whether to support curl_easy_option*... yes
checking whether to support alt-svc... no
configure: disables HSTS due to lack of SSL
checking whether hiding of library internal symbols will actually happen... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating docs/Makefile
config.status: creating docs/examples/Makefile
config.status: creating docs/libcurl/Makefile
config.status: creating docs/libcurl/opts/Makefile
config.status: creating docs/cmdline-opts/Makefile
config.status: creating include/Makefile
config.status: creating include/curl/Makefile
config.status: creating src/Makefile
config.status: creating lib/Makefile
config.status: creating scripts/Makefile
config.status: creating lib/libcurl.vers
config.status: creating tests/Makefile
config.status: creating tests/certs/Makefile
config.status: creating tests/certs/scripts/Makefile
config.status: creating tests/data/Makefile
config.status: creating tests/server/Makefile
config.status: creating tests/libtest/Makefile
config.status: creating tests/unit/Makefile
config.status: creating packages/Makefile
config.status: creating packages/vms/Makefile
config.status: creating curl-config
config.status: creating libcurl.pc
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: amending lib/Makefile
configure: amending src/Makefile
configure: amending tests/unit/Makefile
configure: amending tests/server/Makefile
configure: amending tests/libtest/Makefile
configure: amending docs/examples/Makefile
configure: Configured to build curl/libcurl:
Host setup: x86_64-pc-linux-gnu
Install prefix: /usr/local
Compiler: ccache gcc
CFLAGS: -Werror-implicit-function-declaration -O2 -Wno-system-headers
CPPFLAGS:
LDFLAGS:
LIBS: -lpsl -lz
curl version: 7.82.0-DEV
SSL: no (--with-{openssl,gnutls,nss,mbedtls,wolfssl,schannel,secure-transport,amissl,bearssl,rustls} )
SSH: no (--with-{libssh,libssh2})
zlib: enabled
brotli: no (--with-brotli)
zstd: no (--with-zstd)
GSS-API: no (--with-gssapi)
GSASL: no (libgsasl not found)
TLS-SRP: no (--enable-tls-srp)
resolver: POSIX threaded
IPv6: enabled
Unix sockets: enabled
IDN: no (--with-{libidn2,winidn})
Build libcurl: Shared=no, Static=yes
Built-in manual: enabled
--libcurl option: enabled (--disable-libcurl-option)
Verbose errors: enabled (--disable-verbose)
Code coverage: disabled
SSPI: no (--enable-sspi)
ca cert bundle: no
ca cert path:
ca fallback:
LDAP: no (--enable-ldap / --with-ldap-lib / --with-lber-lib)
LDAPS: no (--enable-ldaps)
RTSP: enabled
RTMP: no (--with-librtmp)
PSL: enabled
Alt-svc: enabled (--disable-alt-svc)
HSTS: no (--enable-hsts)
HTTP1: enabled (internal)
HTTP2: no (--with-nghttp2, --with-hyper)
HTTP3: no (--with-ngtcp2, --with-quiche)
ECH: no (--enable-ech)
Protocols: DICT FILE FTP GOPHER HTTP IMAP MQTT POP3 RTSP SMTP TELNET TFTP
Features: AsynchDNS IPv6 Largefile PSL UnixSockets alt-svc libz
configure: WARNING: Cannot find libraries for LDAP support: LDAP disabled
configure: WARNING: SSL disabled, you will not be able to use HTTPS, FTPS, NTLM and more.
configure: WARNING: Use --with-openssl, --with-gnutls, --with-wolfssl, --with-mbedtls, --with-nss, --with-schannel, --with-secure-transport, --with-amissl, --with-bearssl or --with-rustls to address this.
configure: WARNING: libgsasl was not found
configure: WARNING: Cannot find libraries for IDN support: IDN disabled
$ make -j3
Making all in lib
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
make all-am
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
CC libcurl_la-altsvc.lo
CC libcurl_la-amigaos.lo
CC libcurl_la-asyn-ares.lo
CC libcurl_la-asyn-thread.lo
CC libcurl_la-base64.lo
CC libcurl_la-bufref.lo
CC libcurl_la-c-hyper.lo
CC libcurl_la-conncache.lo
CC libcurl_la-connect.lo
CC libcurl_la-content_encoding.lo
CC libcurl_la-cookie.lo
CC libcurl_la-curl_addrinfo.lo
CC libcurl_la-curl_ctype.lo
CC libcurl_la-curl_des.lo
CC libcurl_la-curl_endian.lo
CC libcurl_la-curl_fnmatch.lo
CC libcurl_la-curl_get_line.lo
CC libcurl_la-curl_gethostname.lo
CC libcurl_la-curl_gssapi.lo
CC libcurl_la-curl_memrchr.lo
CC libcurl_la-curl_multibyte.lo
CC libcurl_la-curl_ntlm_core.lo
CC libcurl_la-curl_ntlm_wb.lo
CC libcurl_la-curl_path.lo
CC libcurl_la-curl_range.lo
CC libcurl_la-curl_rtmp.lo
CC libcurl_la-curl_sasl.lo
CC libcurl_la-curl_sspi.lo
CC libcurl_la-curl_threads.lo
CC libcurl_la-dict.lo
CC libcurl_la-doh.lo
CC libcurl_la-dotdot.lo
CC libcurl_la-dynbuf.lo
CC libcurl_la-easy.lo
CC libcurl_la-easygetopt.lo
CC libcurl_la-easyoptions.lo
CC libcurl_la-escape.lo
CC libcurl_la-file.lo
CC libcurl_la-fileinfo.lo
CC libcurl_la-formdata.lo
CC libcurl_la-ftp.lo
CC libcurl_la-ftplistparser.lo
CC libcurl_la-getenv.lo
CC libcurl_la-getinfo.lo
CC libcurl_la-gopher.lo
CC libcurl_la-hash.lo
CC libcurl_la-hmac.lo
CC libcurl_la-hostasyn.lo
CC libcurl_la-hostcheck.lo
CC libcurl_la-hostip.lo
CC libcurl_la-hostip4.lo
CC libcurl_la-hostip6.lo
CC libcurl_la-hostsyn.lo
CC libcurl_la-hsts.lo
CC libcurl_la-http.lo
CC libcurl_la-http2.lo
CC libcurl_la-http_chunks.lo
CC libcurl_la-http_digest.lo
CC libcurl_la-http_negotiate.lo
CC libcurl_la-http_ntlm.lo
CC libcurl_la-http_proxy.lo
CC libcurl_la-http_aws_sigv4.lo
CC libcurl_la-idn_win32.lo
CC libcurl_la-if2ip.lo
CC libcurl_la-imap.lo
CC libcurl_la-inet_ntop.lo
CC libcurl_la-krb5.lo
CC libcurl_la-inet_pton.lo
CC libcurl_la-ldap.lo
CC libcurl_la-llist.lo
CC libcurl_la-md4.lo
CC libcurl_la-md5.lo
CC libcurl_la-memdebug.lo
CC libcurl_la-mime.lo
CC libcurl_la-mprintf.lo
CC libcurl_la-mqtt.lo
CC libcurl_la-multi.lo
CC libcurl_la-netrc.lo
CC libcurl_la-non-ascii.lo
CC libcurl_la-nonblock.lo
CC libcurl_la-openldap.lo
CC libcurl_la-parsedate.lo
CC libcurl_la-pingpong.lo
CC libcurl_la-pop3.lo
CC libcurl_la-progress.lo
CC libcurl_la-psl.lo
CC libcurl_la-rand.lo
CC libcurl_la-rename.lo
CC libcurl_la-rtsp.lo
CC libcurl_la-select.lo
CC libcurl_la-sendf.lo
CC libcurl_la-setopt.lo
CC libcurl_la-sha256.lo
CC libcurl_la-share.lo
CC libcurl_la-slist.lo
CC libcurl_la-smb.lo
CC libcurl_la-smtp.lo
CC libcurl_la-socketpair.lo
CC libcurl_la-socks.lo
CC libcurl_la-socks_gssapi.lo
CC libcurl_la-socks_sspi.lo
CC libcurl_la-speedcheck.lo
CC libcurl_la-splay.lo
CC libcurl_la-strcase.lo
CC libcurl_la-strdup.lo
CC libcurl_la-strerror.lo
CC libcurl_la-strtok.lo
CC libcurl_la-strtoofft.lo
CC libcurl_la-system_win32.lo
CC libcurl_la-telnet.lo
CC libcurl_la-tftp.lo
CC libcurl_la-timeval.lo
CC libcurl_la-transfer.lo
CC libcurl_la-url.lo
CC libcurl_la-urlapi.lo
CC libcurl_la-version_win32.lo
CC libcurl_la-version.lo
CC libcurl_la-warnless.lo
CC libcurl_la-wildcard.lo
CC libcurl_la-x509asn1.lo
CC vauth/libcurl_la-cleartext.lo
CC vauth/libcurl_la-cram.lo
CC vauth/libcurl_la-digest.lo
CC vauth/libcurl_la-digest_sspi.lo
CC vauth/libcurl_la-gsasl.lo
CC vauth/libcurl_la-krb5_gssapi.lo
CC vauth/libcurl_la-krb5_sspi.lo
CC vauth/libcurl_la-ntlm.lo
CC vauth/libcurl_la-ntlm_sspi.lo
CC vauth/libcurl_la-oauth2.lo
CC vauth/libcurl_la-spnego_gssapi.lo
CC vauth/libcurl_la-spnego_sspi.lo
CC vauth/libcurl_la-vauth.lo
CC vtls/libcurl_la-bearssl.lo
CC vtls/libcurl_la-gskit.lo
CC vtls/libcurl_la-gtls.lo
CC vtls/libcurl_la-keylog.lo
CC vtls/libcurl_la-mbedtls.lo
CC vtls/libcurl_la-mbedtls_threadlock.lo
CC vtls/libcurl_la-nss.lo
CC vtls/libcurl_la-openssl.lo
CC vtls/libcurl_la-rustls.lo
CC vtls/libcurl_la-schannel.lo
CC vtls/libcurl_la-schannel_verify.lo
CC vtls/libcurl_la-sectransp.lo
CC vtls/libcurl_la-vtls.lo
CC vtls/libcurl_la-wolfssl.lo
CC vquic/libcurl_la-ngtcp2.lo
CC vquic/libcurl_la-quiche.lo
CC vquic/libcurl_la-vquic.lo
CC vssh/libcurl_la-libssh.lo
CC vssh/libcurl_la-libssh2.lo
CC vssh/libcurl_la-wolfssh.lo
CCLD libcurl.la
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
Making all in src
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/src'
Making all in ../docs
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
Making all in .
make[3]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
if test "..x" != "..x" -a -e "./curl.1"; then \
/usr/bin/install -c -m 644 "./curl.1" /root/asi_db/builds/curl/_worktrees/w0/docs/curl.1; fi
cd cmdline-opts && make
make[4]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
generate ../../docs/curl.1
make[4]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
make[3]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
Making all in cmdline-opts
make[3]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/src'
CC tool_binmode.o
CC slist_wc.o
CC tool_bname.o
CC tool_cb_dbg.o
CC tool_cb_hdr.o
CC tool_cb_prg.o
CC tool_cb_rea.o
CC tool_cb_see.o
CC tool_cb_wrt.o
CC tool_cfgable.o
CC tool_dirhie.o
CC tool_convert.o
CC tool_doswin.o
CC tool_easysrc.o
CC tool_filetime.o
CC tool_findfile.o
CC tool_formparse.o
CC tool_getparam.o
CC tool_getpass.o
CC tool_help.o
CC tool_helpers.o
HUGE tool_hugehelp.c
CC tool_libinfo.o
CC tool_listhelp.o
CC tool_main.o
CC tool_msgs.o
CC tool_operate.o
CC tool_operhlp.o
CC tool_panykey.o
CC tool_paramhlp.o
CC tool_parsecfg.o
CC tool_progress.o
CC tool_strdup.o
CC tool_setopt.o
CC tool_sleep.o
CC tool_urlglob.o
CC tool_util.o
CC tool_vms.o
CC tool_writeout.o
CC tool_writeout_json.o
CC tool_xattr.o
CC ../lib/strtoofft.o
CC ../lib/nonblock.o
CC ../lib/warnless.o
CC ../lib/curl_ctype.o
CC ../lib/curl_multibyte.o
CC ../lib/version_win32.o
CC ../lib/dynbuf.o
CC tool_hugehelp.o
CCLD curl
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/src'
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/src'
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0'
| @@ -6,7 +6,7 @@ when the reference is invalidated. Once referenced, a buffer cannot be | |
| reallocated. | |
| A data length is stored within the reference for binary data handling | |
| - | purpose; it is not used by the bufref API. |
| + | purposes; it is not used by the bufref API. |
| The `struct bufref` is used to hold data referencing a buffer. The members of | |
| that structure **MUST NOT** be accessed or modified without using the dedicated | |
| @@ -43,7 +43,7 @@ void Curl_bufref_set(struct bufref *br, const void *buffer, size_t length, | |
| ``` | |
| Releases the previously referenced buffer, then assigns the new `buffer` to | |
| - | the structure, associated with its `destructor` function. The later can be |
| + | the structure, associated with its `destructor` function. The latter can be |
| specified as `NULL`: this will be the case when the referenced buffer is | |
| static. | |
| @@ -16,7 +16,7 @@ this program. | |
| See all details at [https://hackerone.com/curl](https://hackerone.com/curl) | |
| This bounty is relying on funds from sponsors. If you use curl professionally, | |
| - | consider help funding this! See |
| + | consider helping fund this! See |
| [https://opencollective.com/curl](https://opencollective.com/curl) for | |
| details. | |
| @@ -71,7 +71,7 @@ can raise the amounts depending on the particular issue. | |
| # What happens if the bounty fund is drained? | |
| The bounty fund depends on sponsors. If we pay out more bounties than we add, | |
| - | the fund will eventually drain. If that end up happening, we will simply not |
| + | the fund will eventually drain. If that ends up happening, we will simply not |
| be able to pay out as high bounties as we would like and hope that we can | |
| convince new sponsors to help us top up the fund again. | |
| @@ -177,7 +177,7 @@ | |
| ## What happens on first filing | |
| When a new issue is posted in the issue tracker or on the mailing list, the | |
| - | team of developers first need to see the report. Maybe they took the day off, |
| + | team of developers first needs to see the report. Maybe they took the day off, |
| maybe they are off in the woods hunting. Have patience. Allow at least a few | |
| days before expecting someone to have responded. | |
| @@ -257,7 +257,7 @@ | |
| ## Closing off stalled bugs | |
| The [issue and pull request trackers](https://github.com/curl/curl) only | |
| - | holds "active" entries open (using a non-precise definition of what active |
| + | hold "active" entries open (using a non-precise definition of what active |
| actually is, but they are at least not completely dead). Those that are | |
| abandoned or in other ways dormant will be closed and sometimes added to | |
| `TODO` and `KNOWN_BUGS` instead. | |
| @@ -9,7 +9,7 @@ check that it adheres to our [Source Code Style guide](CODE_STYLE.md). | |
| ## Command line options | |
| - | `-W[file]` skip that file and excludes it from being checked. Helpful |
| + | `-W[file]` skip that file and exclude it from being checked. Helpful |
| when, for example, one of the files is generated. | |
| `-D[dir]` directory name to prepend to file names when accessing them. | |
| @@ -518,5 +518,5 @@ and the request will fail. | |
| As of curl 7.77.0, you can also pass `SCH_USE_STRONG_CRYPTO` as a cipher name | |
| to [constrain the set of available ciphers as specified in the schannel | |
| documentation](https://docs.microsoft.com/en-us/windows/win32/secauthn/tls-cipher-suites-in-windows-server-2022). | |
| - | Note that the supported ciphers in this case follows the OS version, so if you |
| + | Note that the supported ciphers in this case follow the OS version, so if you |
| are running an outdated OS you might still be supporting weak ciphers. | |
| @@ -14,11 +14,11 @@ FAQ | |
| 1.5 Who makes curl? | |
| 1.6 What do you get for making curl? | |
| 1.7 What about CURL from curl.com? | |
| - | 1.8 I have a problem who do I mail? |
| + | 1.8 I have a problem, who do I mail? |
| 1.9 Where do I buy commercial support for curl? | |
| 1.10 How many are using curl? | |
| 1.11 Why do you not update ca-bundle.crt | |
| - | 1.12 I have a problem who can I chat with? |
| + | 1.12 I have a problem, who can I chat with? |
| 1.13 curl's ECCN number? | |
| 1.14 How do I submit my patch? | |
| 1.15 How do I port libcurl to my OS? | |
| @@ -275,7 +275,7 @@ FAQ | |
| We recognize that we will be living in parallel with curl.com and wish them | |
| every success. | |
| - | 1.8 I have a problem whom do I mail? |
| + | 1.8 I have a problem, who do I mail? |
| Please do not mail any single individual unless you really need to. Keep | |
| curl-related questions on a suitable mailing list. All available mailing | |
| @@ -294,7 +294,7 @@ FAQ | |
| issue private while we investigate, confirm it, work and validate a fix and | |
| agree on a time schedule for publication etc. That way we produce a fix in a | |
| timely manner before the flaw is announced to the world, reducing the impact | |
| - | the problem risk having on existing users. |
| + | the problem risks having on existing users. |
| Security issues can also be taking to the curl security team by emailing | |
| security at curl.se (closed list of receivers, mails are not disclosed). | |
| @@ -339,7 +339,7 @@ FAQ | |
| Firefox (by running 'make ca-bundle), or by using our online service setup | |
| for this purpose: https://curl.se/docs/caextract.html | |
| - | 1.12 I have a problem who can I chat with? |
| + | 1.12 I have a problem who, can I chat with? |
| There's a bunch of friendly people hanging out in the #curl channel on the | |
| IRC network libera.chat. If you are polite and nice, chances are good that | |
| @@ -829,7 +829,7 @@ FAQ | |
| 4.5.4 "404 Not Found" | |
| The server has not found anything matching the Request-URI. No indication | |
| - | is given of whether the condition is temporary or permanent. |
| + | is given as to whether the condition is temporary or permanent. |
| 4.5.5 "405 Method Not Allowed" | |
| @@ -925,7 +925,7 @@ FAQ | |
| To completely disable the certificate verification, use -k. This does | |
| however enable man-in-the-middle attacks and makes the transfer INSECURE. | |
| - | We strongly advice against doing this for more than experiments. |
| + | We strongly advise against doing this for more than experiments. |
| If you get this failure with a CA cert bundle installed and used, the | |
| server's certificate might not be signed by one of the CA's in your CA | |
| @@ -1196,7 +1196,7 @@ FAQ | |
| dynamic import symbols. If you are using Visual Studio, you need to instead | |
| add CURL_STATICLIB in the "Preprocessor Definitions" section. | |
| - | If you get linker error like "unknown symbol __imp__curl_easy_init ..." you |
| + | If you get a linker error like "unknown symbol __imp__curl_easy_init ..." you |
| have linked against the wrong (static) library. If you want to use the | |
| libcurl.dll and import lib, you do not need any extra CFLAGS, but use one of | |
| the import libraries below. These are the libraries produced by the various | |
| @@ -8,7 +8,7 @@ This project was started by and has to some extent been pushed forward over | |
| the years with Daniel Stenberg as the driving force. It matches a standard | |
| BDFL (Benevolent Dictator For Life) style project. | |
| - | This setup has been used due to convenience and the fact that is has worked |
| + | This setup has been used due to convenience and the fact that it has worked |
| fine this far. It is not because someone thinks of it as a superior project | |
| leadership model. It will also only continue working as long as Daniel manages | |
| to listen in to what the project and the general user population wants and | |
| @@ -45,7 +45,7 @@ non-profit organization that holds on to funds for us. This fund is then used | |
| for paying the curl security bug bounties, to reimburse project related | |
| expenses etc. | |
| - | Donations to the project can also come in form of server hosting, providing |
| + | Donations to the project can also come in the form of server hosting, providing |
| services and paying for people to work on curl related code etc. Usually, such | |
| donations are services paid for directly by the sponsors. | |
| @@ -84,4 +84,4 @@ the specific implementation. Either way is fine. | |
| We offer [guidelines](https://curl.se/dev/contribute.html) that are | |
| suitable to be familiar with before you decide to contribute to curl. If | |
| you are used to open source development, you will probably not find many | |
| - | surprises in there. |
| + | surprises there. |
| @@ -145,7 +145,7 @@ June: the curl website gets 13000 visits weekly. curl and libcurl is | |
| 35000 lines of code. Reported successful compiles on more than 40 combinations | |
| of CPUs and operating systems. | |
| - | To estimate number of users of the curl tool or libcurl library is next to |
| + | To estimate the number of users of the curl tool or libcurl library is next to |
| impossible. Around 5000 downloaded packages each week from the main site gives | |
| a hint, but the packages are mirrored extensively, bundled with numerous OS | |
| distributions and otherwise retrieved as part of other software. | |
| @@ -25,7 +25,7 @@ HTTP/3 and QUIC support in curl is considered **EXPERIMENTAL** until further | |
| notice. It needs to be enabled at build-time. | |
| Further development and tweaking of the HTTP/3 support in curl will happen in | |
| - | in the master branch using pull-requests, just like ordinary changes. |
| + | the master branch using pull-requests, just like ordinary changes. |
| # ngtcp2 version | |
| @@ -157,7 +157,7 @@ Check out the [list of known HTTP3 bugs](https://curl.se/docs/knownbugs.html#HTT | |
| This is not advice on how to run anything in production. This is for | |
| development and experimenting. | |
| - | ## Preqreqs |
| + | ## Prereqs |
| An existing local HTTP/1.1 server that hosts files. Preferably also a few huge | |
| ones. You can easily create huge local files like `truncate -s=8G 8GB` - they | |
| @@ -111,7 +111,7 @@ want to alter it, you can select how to deal with each individual library. | |
| ## Select TLS backend | |
| - | These options are provided to select TLS backend to use. |
| + | These options are provided to select the TLS backend to use. |
| - AmiSSL: `--with-amissl` | |
| - BearSSL: `--with-bearssl` | |
| @@ -224,9 +224,9 @@ versions. | |
| ## Using BSD-style lwIP instead of Winsock TCP/IP stack in Win32 builds | |
| In order to compile libcurl and curl using BSD-style lwIP TCP/IP stack it is | |
| - | necessary to make definition of preprocessor symbol `USE_LWIPSOCK` visible to |
| - | libcurl and curl compilation processes. To set this definition you have the |
| - | following alternatives: |
| + | necessary to make the definition of the preprocessor symbol `USE_LWIPSOCK` |
| + | visible to libcurl and curl compilation processes. To set this definition you |
| + | have the following alternatives: |
| - Modify `lib/config-win32.h` and `src/config-win32.h` | |
| - Modify `winbuild/Makefile.vc` | |
| @@ -323,7 +323,8 @@ make -j8 | |
| make install | |
| ``` | |
| - | In all above, the built libraries and executables can be found in `artifacts` folder. |
| + | In all above, the built libraries and executables can be found in the |
| + | `artifacts` folder. |
| # Android | |
| @@ -163,9 +163,9 @@ Windows vs Unix | |
| Inside the source code, We make an effort to avoid `#ifdef [Your OS]`. All | |
| conditionals that deal with features *should* instead be in the format | |
| `#ifdef HAVE_THAT_WEIRD_FUNCTION`. Since Windows cannot run configure scripts, | |
| - | we maintain a `curl_config-win32.h` file in lib directory that is supposed to |
| - | look exactly like a `curl_config.h` file would have looked like on a Windows |
| - | machine. |
| + | we maintain a `curl_config-win32.h` file in the lib directory that is supposed |
| + | to look exactly like a `curl_config.h` file would have looked like on a |
| + | Windows machine. |
| Generally speaking: always remember that this will be compiled on dozens of | |
| operating systems. Do not walk on the edge. | |
| @@ -239,7 +239,7 @@ multi_do() | |
| The protocol-specific functions of course deal with protocol-specific | |
| negotiations and setup. When they are ready to start the actual file | |
| transfer they call the `Curl_setup_transfer()` function (in | |
| - | `lib/transfer.c`) to setup the transfer and returns. |
| + | `lib/transfer.c`) to setup the transfer and return. |
| If this DO function fails and the connection is being re-used, libcurl will | |
| then close this connection, setup a new connection and re-issue the DO | |
| @@ -525,7 +525,7 @@ Memory Debugging | |
| allocated but never freed and other kinds of errors related to resource | |
| management. | |
| - | Internally, definition of preprocessor symbol `DEBUGBUILD` restricts code |
| + | Internally, definition of the preprocessor symbol `DEBUGBUILD` restricts code |
| which is only compiled for debug enabled builds. And symbol `CURLDEBUG` is | |
| used to differentiate code which is _only_ used for memory | |
| tracking/debugging. | |
| @@ -620,8 +620,9 @@ curlx | |
| A macro that converts a string containing a number to a `curl_off_t` number. | |
| This might use the `curlx_strtoll()` function which is provided as source | |
| code in strtoofft.c. Note that the function is only provided if no | |
| - | `strtoll()` (or equivalent) function exist on your platform. If `curl_off_t` |
| - | is only a 32-bit number on your platform, this macro uses `strtol()`. |
| + | `strtoll()` (or equivalent) function exists on your platform. If |
| + | `curl_off_t` is only a 32-bit number on your platform, this macro uses |
| + | `strtol()`. |
| Future | |
| ------ | |
| @@ -778,7 +779,7 @@ Track Down Memory Leaks | |
| curl_dbg_memdebug("dump"); | |
| ``` | |
| - | This will make the malloc debug system output a full trace of all resource |
| + | This will make the malloc debug system output a full trace of all resources |
| using functions to the given file name. Make sure you rebuild your program | |
| and that you link with the same libcurl you built for this purpose as | |
| described above. | |
| @@ -895,8 +896,8 @@ for older and later versions as things do not change drastically that often. | |
| A general idea in libcurl is to keep connections around in a connection | |
| "cache" after they have been used in case they will be used again and then | |
| - | re-use an existing one instead of creating a new as it creates a significant |
| - | performance boost. |
| + | re-use an existing one instead of creating a new one as it creates a |
| + | significant performance boost. |
| Each `connectdata` identifies a single physical connection to a server. If | |
| the connection cannot be kept alive, the connection will be closed after use | |
| @@ -922,7 +923,7 @@ for older and later versions as things do not change drastically that often. | |
| this single struct and thus can be considered a single connection for most | |
| internal concerns. | |
| - | The libcurl source code generally use the name `conn` for the variable that |
| + | The libcurl source code generally uses the name `conn` for the variable that |
| points to the connectdata. | |
| <a name="Curl_multi"></a> | |
| @@ -943,7 +944,7 @@ for older and later versions as things do not change drastically that often. | |
| list when an individual `Curl_easy`'s transfer has completed. | |
| `->hostcache` points to the name cache. It is a hash table for looking up | |
| - | name to IP. The nodes have a limited life time in there and this cache is |
| + | name to IP. The nodes have a limited lifetime in there and this cache is |
| meant to reduce the time for when the same name is wanted within a short | |
| period of time. | |
| @@ -960,7 +961,7 @@ for older and later versions as things do not change drastically that often. | |
| `->closure_handle` is described in the `connectdata` section. | |
| - | The libcurl source code generally use the name `multi` for the variable that |
| + | The libcurl source code generally uses the name `multi` for the variable that |
| points to the `Curl_multi` struct. | |
| <a name="Curl_handler"></a> | |
| @@ -1001,8 +1002,8 @@ for older and later versions as things do not change drastically that often. | |
| the DO action internally. If the DO is not enough and things need to be kept | |
| getting done for the entire DO sequence to complete, `->doing` is then | |
| usually also provided. Each protocol that needs to do multiple commands or | |
| - | similar for do/doing need to implement their own state machines (see SCP, |
| - | SFTP, FTP). Some protocols (only FTP and only due to historical reasons) has |
| + | similar for do/doing needs to implement their own state machines (see SCP, |
| + | SFTP, FTP). Some protocols (only FTP and only due to historical reasons) have |
| a separate piece of the DO state called `DO_MORE`. | |
| `->doing` keeps getting called while issuing the transfer request command(s) | |
| @@ -1048,7 +1049,8 @@ for older and later versions as things do not change drastically that often. | |
| limit which "direction" of socket actions that the main engine will | |
| concern itself with. | |
| - | - `PROTOPT_NONETWORK` - a protocol that does not use network (read `file:`) |
| + | - `PROTOPT_NONETWORK` - a protocol that does not use the network (read |
| + | `file:`) |
| - `PROTOPT_NEEDSPWD` - this protocol needs a password and will use a default | |
| one unless one is provided | |
| @@ -786,7 +786,7 @@ problems may have been fixed or changed somewhat since this was written. | |
| 9.3 Remote recursive folder creation with SFTP | |
| On this servers, the curl fails to create directories on the remote server | |
| - | even when CURLOPT_FTP_CREATE_MISSING_DIRS option is set. |
| + | even when the CURLOPT_FTP_CREATE_MISSING_DIRS option is set. |
| See https://github.com/curl/curl/issues/5204 | |
| @@ -940,7 +940,7 @@ problems may have been fixed or changed somewhat since this was written. | |
| When libcurl creates sockets with socketpair(), those are not "exposed" in | |
| CURLOPT_OPENSOCKETFUNCTION and therefore might surprise and be unknown to | |
| - | applications that expects and wants all sockets known beforehand. One way to |
| + | applications that expect and want all sockets known beforehand. One way to |
| address this issue is to introduce a CURLOPT_OPENSOCKETPAIRFUNCTION callback. | |
| https://github.com/curl/curl/issues/5747 | |
| @@ -195,7 +195,7 @@ MAIL ETIQUETTE | |
| Many mail programs and web archivers use information within mails to keep | |
| them together as "threads", as collections of posts that discuss a certain | |
| subject. If you do not intend to reply on the same or similar subject, do not | |
| - | just hit reply on an existing mail and change subject, create a new mail. |
| + | just hit reply on an existing mail and change the subject, create a new mail. |
| 2.2 Reply to the List | |
| @@ -282,4 +282,4 @@ MAIL ETIQUETTE | |
| Getting the solution posted also helps other users that experience the same | |
| problem(s). They get to see (possibly in the web archives) that the | |
| - | suggested fixes actually has helped at least one person. |
| + | suggested fixes actually have helped at least one person. |
| @@ -603,7 +603,7 @@ header from being used: | |
| ## FTP and Path Names | |
| Do note that when getting files with a `ftp://` URL, the given path is | |
| - | relative the directory you enter. To get the file `README` from your home |
| + | relative to the directory you enter. To get the file `README` from your home |
| directory at your ftp site, do: | |
| curl ftp://user:[email protected]/README | |
| @@ -770,8 +770,8 @@ If you have installed the OpenLDAP library, curl can take advantage of it and | |
| offer `ldap://` support. On Windows, curl will use WinLDAP from Platform SDK | |
| by default. | |
| - | Default protocol version used by curl is LDAPv3. LDAPv2 will be used as |
| - | fallback mechanism in case if LDAPv3 will fail to connect. |
| + | Default protocol version used by curl is LDAPv3. LDAPv2 will be used as a |
| + | fallback mechanism in case LDAPv3 fails to connect. |
| LDAP is a complex thing and writing an LDAP query is not an easy task. I do | |
| advise you to dig up the syntax description for that elsewhere. One such place | |
| @@ -791,7 +791,7 @@ You also can use authentication when accessing LDAP catalog: | |
| curl -u user:passwd "ldap://ldap.frontec.se/o=frontec??sub?mail=*" | |
| curl "ldap://user:[email protected]/o=frontec??sub?mail=*" | |
| - | By default, if user and password provided, OpenLDAP/WinLDAP will use basic |
| + | By default, if user and password are provided, OpenLDAP/WinLDAP will use basic |
| authentication. On Windows you can control this behavior by providing one of | |
| `--basic`, `--ntlm` or `--digest` option in curl command line | |
| @@ -5,7 +5,7 @@ another protocol to curl. After all, curl already supports 25 something | |
| protocols and it is the Internet transfer machine for the world. | |
| In the curl project we love protocols and we love supporting many protocols | |
| - | and do it well. |
| + | and doing it well. |
| So how do you proceed to add a new protocol and what are the requirements? | |
| @@ -19,7 +19,7 @@ Vulnerability Handling | |
| The typical process for handling a new security vulnerability is as follows. | |
| No information should be made public about a vulnerability until it is | |
| - | formally announced at the end of this process. That means, for example that a |
| + | formally announced at the end of this process. That means, for example, that a |
| bug tracker entry must NOT be created to track the issue since that will make | |
| the issue public and it should not be discussed on any of the project's public | |
| mailing lists. Also messages associated with any commits should not make any | |
| @@ -68,7 +68,7 @@ announcement. | |
| should ideally contain the CVE number. | |
| - The security team also decides on and delivers a monetary reward to the | |
| - | reporter as per the bug-bounty polices. |
| + | reporter as per the bug-bounty policies. |
| - No more than 10 days before release, inform | |
| [distros@openwall](https://oss-security.openwall.org/wiki/mailing-lists/distros) | |
| @@ -103,7 +103,7 @@ might ask you to join the list or you can ask to join it. It really is not a | |
| formal process. We basically only require that you have a long-term presence | |
| in the curl project and you have shown an understanding for the project and | |
| its way of working. You must have been around for a good while and you should | |
| - | have no plans in vanishing in the near future. |
| + | have no plans of vanishing in the near future. |
| We do not make the list of participants public mostly because it tends to vary | |
| somewhat over time and a list somewhere will only risk getting outdated. | |
| @@ -11,7 +11,7 @@ | |
| ago. | |
| There are several known reasons why a connection that involves SSL might | |
| - | fail. This is a document that attempts to details the most common ones and |
| + | fail. This is a document that attempts to detail the most common ones and |
| how to mitigate them. | |
| ## CA certs | |
| @@ -29,7 +29,7 @@ Which CAs do you trust? You can decide to trust the same set of companies your | |
| operating system trusts, or the set one of the known browsers trust. That is | |
| basically trust via someone else you trust. You should just be aware that | |
| modern operating systems and browsers are setup to trust *hundreds* of | |
| - | companies and recent years several such CAs have been found untrustworthy. |
| + | companies and in recent years several such CAs have been found untrustworthy. |
| Certificate Verification | |
| ------------------------ | |
| @@ -63,8 +63,8 @@ server, do one of the following: | |
| store. The default CA certificate store can be changed at compile time with | |
| the following configure options: | |
| - | --with-ca-bundle=FILE: use the specified file as CA certificate store. CA |
| - | certificates need to be concatenated in PEM format into this file. |
| + | --with-ca-bundle=FILE: use the specified file as the CA certificate store. |
| + | CA certificates need to be concatenated in PEM format into this file. |
| --with-ca-path=PATH: use the specified path as CA certificate store. CA | |
| certificates need to be stored as individual PEM files in this directory. | |
| @@ -336,9 +336,9 @@ | |
| ## Figure Out What A POST Looks Like | |
| - | When you are about fill in a form and send to a server by using curl instead |
| - | of a browser, you are of course interested in sending a POST exactly the way |
| - | your browser does. |
| + | When you are about to fill in a form and send it to a server by using curl |
| + | instead of a browser, you are of course interested in sending a POST exactly |
| + | the way your browser does. |
| An easy way to get to see this, is to save the HTML page with the form on | |
| your local disk, modify the 'method' to a GET, and press the submit button | |
| @@ -476,7 +476,7 @@ | |
| ## Other redirects | |
| - | Browser typically support at least two other ways of redirects that curl |
| + | Browsers typically support at least two other ways of redirects that curl |
| does not: first the html may contain a meta refresh tag that asks the browser | |
| to load a specific URL after a set number of seconds, or it may use | |
| javascript to do it. | |
| @@ -153,7 +153,7 @@ since it often means passing around the password in plain text and is thus a | |
| security risk. | |
| URLs for IMAP, POP3 and SMTP also support *login options* as part of the | |
| - | userinfo field. they are provided as a semicolon after the password and then |
| + | userinfo field. They are provided as a semicolon after the password and then |
| the options. | |
| ## Hostname | |
| @@ -220,7 +220,7 @@ directory listing for the root / home directory will be returned. | |
| FTP servers typically put the user in its "home directory" after login, which | |
| then differs between users. To explicitly specify the root directory of an FTP | |
| - | server start the path with double slash `//` or `/%2f` (2F is the hexadecimal |
| + | server, start the path with double slash `//` or `/%2f` (2F is the hexadecimal |
| value of the ascii code for the slash). | |
| ## FILE | |