← Commit list

bda2129114

Viktor Szakats

2023-12-06

SUCCESS Duration: 92s

Subject

tidy-up: fix yamllint whitespace issues

Binary

Download Binary (850 KB)

Architecture & Compiler Flags

Architecture: x86_64-linux-gnu Compiler: gcc (Ubuntu 11.4.0-1ubuntu1~22.04.3) 11.4.0

—

Build Log

$ git checkout -f bda212911457c6fadfbba50be61afc4ca513fa56
Previous HEAD position was 8b76591b6b tidy-up: fix yamllint whitespace issues in labeler.yml
HEAD is now at bda2129114 tidy-up: fix yamllint whitespace issues

$ git clean -fdx
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing curl-config
Removing depcomp
Removing docs/Makefile
Removing docs/Makefile.in
Removing docs/cmdline-opts/Makefile
Removing docs/cmdline-opts/Makefile.in
Removing docs/curl.1
Removing docs/examples/.deps/
Removing docs/examples/Makefile
Removing docs/examples/Makefile.in
Removing docs/libcurl/Makefile
Removing docs/libcurl/Makefile.in
Removing docs/libcurl/opts/Makefile
Removing docs/libcurl/opts/Makefile.in
Removing include/Makefile
Removing include/Makefile.in
Removing include/curl/Makefile
Removing include/curl/Makefile.in
Removing install-sh
Removing lib/.deps/
Removing lib/.dirstamp
Removing lib/.libs/
Removing lib/Makefile
Removing lib/Makefile.in
Removing lib/base64.o
Removing lib/curl_config.h
Removing lib/curl_config.h.in
Removing lib/curl_multibyte.o
Removing lib/dynbuf.o
Removing lib/libcurl.la
Removing lib/libcurl.plist
Removing lib/libcurl.vers
Removing lib/libcurl_la-altsvc.lo
Removing lib/libcurl_la-altsvc.o
Removing lib/libcurl_la-amigaos.lo
Removing lib/libcurl_la-amigaos.o
Removing lib/libcurl_la-asyn-ares.lo
Removing lib/libcurl_la-asyn-ares.o
Removing lib/libcurl_la-asyn-thread.lo
Removing lib/libcurl_la-asyn-thread.o
Removing lib/libcurl_la-base64.lo
Removing lib/libcurl_la-base64.o
Removing lib/libcurl_la-bufq.lo
Removing lib/libcurl_la-bufq.o
Removing lib/libcurl_la-bufref.lo
Removing lib/libcurl_la-bufref.o
Removing lib/libcurl_la-c-hyper.lo
Removing lib/libcurl_la-c-hyper.o
Removing lib/libcurl_la-cf-h1-proxy.lo
Removing lib/libcurl_la-cf-h1-proxy.o
Removing lib/libcurl_la-cf-h2-proxy.lo
Removing lib/libcurl_la-cf-h2-proxy.o
Removing lib/libcurl_la-cf-haproxy.lo
Removing lib/libcurl_la-cf-haproxy.o
Removing lib/libcurl_la-cf-https-connect.lo
Removing lib/libcurl_la-cf-https-connect.o
Removing lib/libcurl_la-cf-socket.lo
Removing lib/libcurl_la-cf-socket.o
Removing lib/libcurl_la-cfilters.lo
Removing lib/libcurl_la-cfilters.o
Removing lib/libcurl_la-conncache.lo
Removing lib/libcurl_la-conncache.o
Removing lib/libcurl_la-connect.lo
Removing lib/libcurl_la-connect.o
Removing lib/libcurl_la-content_encoding.lo
Removing lib/libcurl_la-content_encoding.o
Removing lib/libcurl_la-cookie.lo
Removing lib/libcurl_la-cookie.o
Removing lib/libcurl_la-curl_addrinfo.lo
Removing lib/libcurl_la-curl_addrinfo.o
Removing lib/libcurl_la-curl_des.lo
Removing lib/libcurl_la-curl_des.o
Removing lib/libcurl_la-curl_endian.lo
Removing lib/libcurl_la-curl_endian.o
Removing lib/libcurl_la-curl_fnmatch.lo
Removing lib/libcurl_la-curl_fnmatch.o
Removing lib/libcurl_la-curl_get_line.lo
Removing lib/libcurl_la-curl_get_line.o
Removing lib/libcurl_la-curl_gethostname.lo
Removing lib/libcurl_la-curl_gethostname.o
Removing lib/libcurl_la-curl_gssapi.lo
Removing lib/libcurl_la-curl_gssapi.o
Removing lib/libcurl_la-curl_memrchr.lo
Removing lib/libcurl_la-curl_memrchr.o
Removing lib/libcurl_la-curl_multibyte.lo
Removing lib/libcurl_la-curl_multibyte.o
Removing lib/libcurl_la-curl_ntlm_core.lo
Removing lib/libcurl_la-curl_ntlm_core.o
Removing lib/libcurl_la-curl_ntlm_wb.lo
Removing lib/libcurl_la-curl_ntlm_wb.o
Removing lib/libcurl_la-curl_path.lo
Removing lib/libcurl_la-curl_path.o
Removing lib/libcurl_la-curl_range.lo
Removing lib/libcurl_la-curl_range.o
Removing lib/libcurl_la-curl_rtmp.lo
Removing lib/libcurl_la-curl_rtmp.o
Removing lib/libcurl_la-curl_sasl.lo
Removing lib/libcurl_la-curl_sasl.o
Removing lib/libcurl_la-curl_sspi.lo
Removing lib/libcurl_la-curl_sspi.o
Removing lib/libcurl_la-curl_threads.lo
Removing lib/libcurl_la-curl_threads.o
Removing lib/libcurl_la-curl_trc.lo
Removing lib/libcurl_la-curl_trc.o
Removing lib/libcurl_la-dict.lo
Removing lib/libcurl_la-dict.o
Removing lib/libcurl_la-doh.lo
Removing lib/libcurl_la-doh.o
Removing lib/libcurl_la-dynbuf.lo
Removing lib/libcurl_la-dynbuf.o
Removing lib/libcurl_la-dynhds.lo
Removing lib/libcurl_la-dynhds.o
Removing lib/libcurl_la-easy.lo
Removing lib/libcurl_la-easy.o
Removing lib/libcurl_la-easygetopt.lo
Removing lib/libcurl_la-easygetopt.o
Removing lib/libcurl_la-easyoptions.lo
Removing lib/libcurl_la-easyoptions.o
Removing lib/libcurl_la-escape.lo
Removing lib/libcurl_la-escape.o
Removing lib/libcurl_la-file.lo
Removing lib/libcurl_la-file.o
Removing lib/libcurl_la-fileinfo.lo
Removing lib/libcurl_la-fileinfo.o
Removing lib/libcurl_la-fopen.lo
Removing lib/libcurl_la-fopen.o
Removing lib/libcurl_la-formdata.lo
Removing lib/libcurl_la-formdata.o
Removing lib/libcurl_la-ftp.lo
Removing lib/libcurl_la-ftp.o
Removing lib/libcurl_la-ftplistparser.lo
Removing lib/libcurl_la-ftplistparser.o
Removing lib/libcurl_la-getenv.lo
Removing lib/libcurl_la-getenv.o
Removing lib/libcurl_la-getinfo.lo
Removing lib/libcurl_la-getinfo.o
Removing lib/libcurl_la-gopher.lo
Removing lib/libcurl_la-gopher.o
Removing lib/libcurl_la-hash.lo
Removing lib/libcurl_la-hash.o
Removing lib/libcurl_la-headers.lo
Removing lib/libcurl_la-headers.o
Removing lib/libcurl_la-hmac.lo
Removing lib/libcurl_la-hmac.o
Removing lib/libcurl_la-hostasyn.lo
Removing lib/libcurl_la-hostasyn.o
Removing lib/libcurl_la-hostip.lo
Removing lib/libcurl_la-hostip.o
Removing lib/libcurl_la-hostip4.lo
Removing lib/libcurl_la-hostip4.o
Removing lib/libcurl_la-hostip6.lo
Removing lib/libcurl_la-hostip6.o
Removing lib/libcurl_la-hostsyn.lo
Removing lib/libcurl_la-hostsyn.o
Removing lib/libcurl_la-hsts.lo
Removing lib/libcurl_la-hsts.o
Removing lib/libcurl_la-http.lo
Removing lib/libcurl_la-http.o
Removing lib/libcurl_la-http1.lo
Removing lib/libcurl_la-http1.o
Removing lib/libcurl_la-http2.lo
Removing lib/libcurl_la-http2.o
Removing lib/libcurl_la-http_aws_sigv4.lo
Removing lib/libcurl_la-http_aws_sigv4.o
Removing lib/libcurl_la-http_chunks.lo
Removing lib/libcurl_la-http_chunks.o
Removing lib/libcurl_la-http_digest.lo
Removing lib/libcurl_la-http_digest.o
Removing lib/libcurl_la-http_negotiate.lo
Removing lib/libcurl_la-http_negotiate.o
Removing lib/libcurl_la-http_ntlm.lo
Removing lib/libcurl_la-http_ntlm.o
Removing lib/libcurl_la-http_proxy.lo
Removing lib/libcurl_la-http_proxy.o
Removing lib/libcurl_la-idn.lo
Removing lib/libcurl_la-idn.o
Removing lib/libcurl_la-if2ip.lo
Removing lib/libcurl_la-if2ip.o
Removing lib/libcurl_la-imap.lo
Removing lib/libcurl_la-imap.o
Removing lib/libcurl_la-inet_ntop.lo
Removing lib/libcurl_la-inet_ntop.o
Removing lib/libcurl_la-inet_pton.lo
Removing lib/libcurl_la-inet_pton.o
Removing lib/libcurl_la-krb5.lo
Removing lib/libcurl_la-krb5.o
Removing lib/libcurl_la-ldap.lo
Removing lib/libcurl_la-ldap.o
Removing lib/libcurl_la-llist.lo
Removing lib/libcurl_la-llist.o
Removing lib/libcurl_la-macos.lo
Removing lib/libcurl_la-macos.o
Removing lib/libcurl_la-md4.lo
Removing lib/libcurl_la-md4.o
Removing lib/libcurl_la-md5.lo
Removing lib/libcurl_la-md5.o
Removing lib/libcurl_la-memdebug.lo
Removing lib/libcurl_la-memdebug.o
Removing lib/libcurl_la-mime.lo
Removing lib/libcurl_la-mime.o
Removing lib/libcurl_la-mprintf.lo
Removing lib/libcurl_la-mprintf.o
Removing lib/libcurl_la-mqtt.lo
Removing lib/libcurl_la-mqtt.o
Removing lib/libcurl_la-multi.lo
Removing lib/libcurl_la-multi.o
Removing lib/libcurl_la-netrc.lo
Removing lib/libcurl_la-netrc.o
Removing lib/libcurl_la-nonblock.lo
Removing lib/libcurl_la-nonblock.o
Removing lib/libcurl_la-noproxy.lo
Removing lib/libcurl_la-noproxy.o
Removing lib/libcurl_la-openldap.lo
Removing lib/libcurl_la-openldap.o
Removing lib/libcurl_la-parsedate.lo
Removing lib/libcurl_la-parsedate.o
Removing lib/libcurl_la-pingpong.lo
Removing lib/libcurl_la-pingpong.o
Removing lib/libcurl_la-pop3.lo
Removing lib/libcurl_la-pop3.o
Removing lib/libcurl_la-progress.lo
Removing lib/libcurl_la-progress.o
Removing lib/libcurl_la-psl.lo
Removing lib/libcurl_la-psl.o
Removing lib/libcurl_la-rand.lo
Removing lib/libcurl_la-rand.o
Removing lib/libcurl_la-rename.lo
Removing lib/libcurl_la-rename.o
Removing lib/libcurl_la-rtsp.lo
Removing lib/libcurl_la-rtsp.o
Removing lib/libcurl_la-select.lo
Removing lib/libcurl_la-select.o
Removing lib/libcurl_la-sendf.lo
Removing lib/libcurl_la-sendf.o
Removing lib/libcurl_la-setopt.lo
Removing lib/libcurl_la-setopt.o
Removing lib/libcurl_la-sha256.lo
Removing lib/libcurl_la-sha256.o
Removing lib/libcurl_la-share.lo
Removing lib/libcurl_la-share.o
Removing lib/libcurl_la-slist.lo
Removing lib/libcurl_la-slist.o
Removing lib/libcurl_la-smb.lo
Removing lib/libcurl_la-smb.o
Removing lib/libcurl_la-smtp.lo
Removing lib/libcurl_la-smtp.o
Removing lib/libcurl_la-socketpair.lo
Removing lib/libcurl_la-socketpair.o
Removing lib/libcurl_la-socks.lo
Removing lib/libcurl_la-socks.o
Removing lib/libcurl_la-socks_gssapi.lo
Removing lib/libcurl_la-socks_gssapi.o
Removing lib/libcurl_la-socks_sspi.lo
Removing lib/libcurl_la-socks_sspi.o
Removing lib/libcurl_la-speedcheck.lo
Removing lib/libcurl_la-speedcheck.o
Removing lib/libcurl_la-splay.lo
Removing lib/libcurl_la-splay.o
Removing lib/libcurl_la-strcase.lo
Removing lib/libcurl_la-strcase.o
Removing lib/libcurl_la-strdup.lo
Removing lib/libcurl_la-strdup.o
Removing lib/libcurl_la-strerror.lo
Removing lib/libcurl_la-strerror.o
Removing lib/libcurl_la-strtok.lo
Removing lib/libcurl_la-strtok.o
Removing lib/libcurl_la-strtoofft.lo
Removing lib/libcurl_la-strtoofft.o
Removing lib/libcurl_la-system_win32.lo
Removing lib/libcurl_la-system_win32.o
Removing lib/libcurl_la-telnet.lo
Removing lib/libcurl_la-telnet.o
Removing lib/libcurl_la-tftp.lo
Removing lib/libcurl_la-tftp.o
Removing lib/libcurl_la-timediff.lo
Removing lib/libcurl_la-timediff.o
Removing lib/libcurl_la-timeval.lo
Removing lib/libcurl_la-timeval.o
Removing lib/libcurl_la-transfer.lo
Removing lib/libcurl_la-transfer.o
Removing lib/libcurl_la-url.lo
Removing lib/libcurl_la-url.o
Removing lib/libcurl_la-urlapi.lo
Removing lib/libcurl_la-urlapi.o
Removing lib/libcurl_la-version.lo
Removing lib/libcurl_la-version.o
Removing lib/libcurl_la-version_win32.lo
Removing lib/libcurl_la-version_win32.o
Removing lib/libcurl_la-warnless.lo
Removing lib/libcurl_la-warnless.o
Removing lib/libcurl_la-ws.lo
Removing lib/libcurl_la-ws.o
Removing lib/nonblock.o
Removing lib/stamp-h1
Removing lib/strtoofft.o
Removing lib/timediff.o
Removing lib/vauth/.deps/
Removing lib/vauth/.dirstamp
Removing lib/vauth/libcurl_la-cleartext.lo
Removing lib/vauth/libcurl_la-cleartext.o
Removing lib/vauth/libcurl_la-cram.lo
Removing lib/vauth/libcurl_la-cram.o
Removing lib/vauth/libcurl_la-digest.lo
Removing lib/vauth/libcurl_la-digest.o
Removing lib/vauth/libcurl_la-digest_sspi.lo
Removing lib/vauth/libcurl_la-digest_sspi.o
Removing lib/vauth/libcurl_la-gsasl.lo
Removing lib/vauth/libcurl_la-gsasl.o
Removing lib/vauth/libcurl_la-krb5_gssapi.lo
Removing lib/vauth/libcurl_la-krb5_gssapi.o
Removing lib/vauth/libcurl_la-krb5_sspi.lo
Removing lib/vauth/libcurl_la-krb5_sspi.o
Removing lib/vauth/libcurl_la-ntlm.lo
Removing lib/vauth/libcurl_la-ntlm.o
Removing lib/vauth/libcurl_la-ntlm_sspi.lo
Removing lib/vauth/libcurl_la-ntlm_sspi.o
Removing lib/vauth/libcurl_la-oauth2.lo
Removing lib/vauth/libcurl_la-oauth2.o
Removing lib/vauth/libcurl_la-spnego_gssapi.lo
Removing lib/vauth/libcurl_la-spnego_gssapi.o
Removing lib/vauth/libcurl_la-spnego_sspi.lo
Removing lib/vauth/libcurl_la-spnego_sspi.o
Removing lib/vauth/libcurl_la-vauth.lo
Removing lib/vauth/libcurl_la-vauth.o
Removing lib/version_win32.o
Removing lib/vquic/.deps/
Removing lib/vquic/.dirstamp
Removing lib/vquic/libcurl_la-curl_msh3.lo
Removing lib/vquic/libcurl_la-curl_msh3.o
Removing lib/vquic/libcurl_la-curl_ngtcp2.lo
Removing lib/vquic/libcurl_la-curl_ngtcp2.o
Removing lib/vquic/libcurl_la-curl_quiche.lo
Removing lib/vquic/libcurl_la-curl_quiche.o
Removing lib/vquic/libcurl_la-vquic.lo
Removing lib/vquic/libcurl_la-vquic.o
Removing lib/vssh/.deps/
Removing lib/vssh/.dirstamp
Removing lib/vssh/libcurl_la-libssh.lo
Removing lib/vssh/libcurl_la-libssh.o
Removing lib/vssh/libcurl_la-libssh2.lo
Removing lib/vssh/libcurl_la-libssh2.o
Removing lib/vssh/libcurl_la-wolfssh.lo
Removing lib/vssh/libcurl_la-wolfssh.o
Removing lib/vtls/.deps/
Removing lib/vtls/.dirstamp
Removing lib/vtls/libcurl_la-bearssl.lo
Removing lib/vtls/libcurl_la-bearssl.o
Removing lib/vtls/libcurl_la-gtls.lo
Removing lib/vtls/libcurl_la-gtls.o
Removing lib/vtls/libcurl_la-hostcheck.lo
Removing lib/vtls/libcurl_la-hostcheck.o
Removing lib/vtls/libcurl_la-keylog.lo
Removing lib/vtls/libcurl_la-keylog.o
Removing lib/vtls/libcurl_la-mbedtls.lo
Removing lib/vtls/libcurl_la-mbedtls.o
Removing lib/vtls/libcurl_la-mbedtls_threadlock.lo
Removing lib/vtls/libcurl_la-mbedtls_threadlock.o
Removing lib/vtls/libcurl_la-openssl.lo
Removing lib/vtls/libcurl_la-openssl.o
Removing lib/vtls/libcurl_la-rustls.lo
Removing lib/vtls/libcurl_la-rustls.o
Removing lib/vtls/libcurl_la-schannel.lo
Removing lib/vtls/libcurl_la-schannel.o
Removing lib/vtls/libcurl_la-schannel_verify.lo
Removing lib/vtls/libcurl_la-schannel_verify.o
Removing lib/vtls/libcurl_la-sectransp.lo
Removing lib/vtls/libcurl_la-sectransp.o
Removing lib/vtls/libcurl_la-vtls.lo
Removing lib/vtls/libcurl_la-vtls.o
Removing lib/vtls/libcurl_la-wolfssl.lo
Removing lib/vtls/libcurl_la-wolfssl.o
Removing lib/vtls/libcurl_la-x509asn1.lo
Removing lib/vtls/libcurl_la-x509asn1.o
Removing lib/warnless.o
Removing libcurl.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing packages/Makefile
Removing packages/Makefile.in
Removing packages/vms/Makefile
Removing packages/vms/Makefile.in
Removing scripts/Makefile
Removing scripts/Makefile.in
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/curl
Removing src/slist_wc.o
Removing src/tool_binmode.o
Removing src/tool_bname.o
Removing src/tool_cb_dbg.o
Removing src/tool_cb_hdr.o
Removing src/tool_cb_prg.o
Removing src/tool_cb_rea.o
Removing src/tool_cb_see.o
Removing src/tool_cb_wrt.o
Removing src/tool_cfgable.o
Removing src/tool_dirhie.o
Removing src/tool_doswin.o
Removing src/tool_easysrc.o
Removing src/tool_filetime.o
Removing src/tool_findfile.o
Removing src/tool_formparse.o
Removing src/tool_getparam.o
Removing src/tool_getpass.o
Removing src/tool_help.o
Removing src/tool_helpers.o
Removing src/tool_hugehelp.c
Removing src/tool_hugehelp.o
Removing src/tool_ipfs.o
Removing src/tool_libinfo.o
Removing src/tool_listhelp.o
Removing src/tool_main.o
Removing src/tool_msgs.o
Removing src/tool_operate.o
Removing src/tool_operhlp.o
Removing src/tool_paramhlp.o
Removing src/tool_parsecfg.o
Removing src/tool_progress.o
Removing src/tool_setopt.o
Removing src/tool_sleep.o
Removing src/tool_stderr.o
Removing src/tool_strdup.o
Removing src/tool_urlglob.o
Removing src/tool_util.o
Removing src/tool_vms.o
Removing src/tool_writeout.o
Removing src/tool_writeout_json.o
Removing src/tool_xattr.o
Removing src/var.o
Removing test-driver
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/certs/Makefile
Removing tests/certs/Makefile.in
Removing tests/certs/scripts/Makefile
Removing tests/certs/scripts/Makefile.in
Removing tests/config
Removing tests/configurehelp.pm
Removing tests/data/Makefile
Removing tests/data/Makefile.in
Removing tests/http/Makefile
Removing tests/http/Makefile.in
Removing tests/http/clients/.deps/
Removing tests/http/clients/Makefile
Removing tests/http/clients/Makefile.in
Removing tests/http/config.ini
Removing tests/libtest/.deps/
Removing tests/libtest/Makefile
Removing tests/libtest/Makefile.in
Removing tests/server/.deps/
Removing tests/server/Makefile
Removing tests/server/Makefile.in
Removing tests/unit/.deps/
Removing tests/unit/Makefile
Removing tests/unit/Makefile.in

$ autoreconf -fi
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Remember to add 'LT_INIT' to configure.ac.
configure.ac:123: installing './compile'
configure.ac:424: installing './config.guess'
configure.ac:424: installing './config.sub'
configure.ac:123: installing './install-sh'
configure.ac:129: installing './missing'
docs/examples/Makefile.am: installing './depcomp'
parallel-tests: installing './test-driver'

$ bash -c find . -name config.guess -exec cp /usr/share/misc/config.guess {} \;

$ bash -c find . -name config.sub -exec cp /usr/share/misc/config.sub {} \;

$ chmod +x configure

$ ./configure --disable-shared --without-ssl --disable-docs
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable ECH support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... ccache gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether ccache gcc accepts -g... yes
checking for ccache gcc option to enable C11 features... none needed
checking whether ccache gcc understands -c and -o together... yes
checking how to run the C preprocessor... ccache gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of ccache gcc... gcc3
checking curl version... 8.5.0-DEV
checking for httpd... no
checking for apache2... no
checking for apachectl... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defined... no
checking if _THREAD_SAFE is actually needed... no
checking if _THREAD_SAFE is onwards defined... no
checking if _REENTRANT is already defined... no
checking if _REENTRANT is actually needed... no
checking if _REENTRANT is onwards defined... no
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking how to print strings... printf
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for fgrep... /usr/bin/grep -F
checking for ld used by ccache gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from ccache gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking for dlfcn.h... yes
checking for objdir... .libs
checking if ccache gcc supports -fno-rtti -fno-exceptions... no
checking for ccache gcc option to produce PIC... -fPIC -DPIC
checking if ccache gcc PIC flag -fPIC -DPIC works... yes
checking if ccache gcc static flag -static works... yes
checking if ccache gcc supports -c -o file.o... yes
checking if ccache gcc supports -c -o file.o... (cached) yes
checking whether the ccache gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether to build shared libraries with -version-info... yes
checking whether to build shared libraries with -no-undefined... no
checking whether to build shared libraries with -mimpure-text... no
checking whether to build shared libraries with PIC... yes
checking whether to build static libraries with PIC... yes
checking whether to build shared libraries only... no
checking whether to build static libraries only... yes
checking for windres... no
checking for inline... inline
checking if cpp -P is needed... yes
checking if cpp -P works... yes
checking if compiler is DEC/Compaq/HP C... no
checking if compiler is HP-UX C... no
checking if compiler is IBM C... no
checking if compiler is Intel C... no
checking if compiler is clang... no
checking if compiler is GNU C... yes
checking compiler version... gcc '1100' (raw: '11')
checking if compiler is SGI MIPSpro C... no
checking if compiler is SGI MIPS C... no
checking if compiler is SunPro C... no
checking if compiler is Tiny C... no
checking if compiler accepts some basic options... yes
configure: compiler options added: -Werror-implicit-function-declaration
checking if compiler optimizer assumed setting might be used... yes
checking if compiler accepts optimizer enabling options... yes
configure: compiler options added: -O2
checking if compiler accepts strict warning options... yes
configure: compiler options added: -Wno-system-headers
checking if compiler halts on compilation errors... yes
checking if compiler halts on negative sized arrays... yes
checking if compiler halts on function prototype mismatch... yes
checking if compiler supports hiding library internal symbols... yes
checking for windows.h... no
checking whether build target is a native Windows one... no
checking whether build target supports WIN32 file API... no
checking whether build target supports WIN32 crypto API... no
checking for good-to-use Darwin CFLAGS... no
checking whether to link macOS CoreFoundation, CoreServices, and SystemConfiguration frameworks... no
checking to see if the compiler supports __builtin_available()... no
checking whether to support http... yes
checking whether to support ftp... yes
checking whether to support file... yes
checking whether to support ldap... yes
checking whether to support ldaps... yes
checking whether to support rtsp... yes
checking whether to support proxies... yes
checking whether to support dict... yes
checking whether to support telnet... yes
checking whether to support tftp... yes
checking whether to support pop3... yes
checking whether to support imap... yes
checking whether to support smb... yes
checking whether to support smtp... yes
checking whether to support gopher... yes
checking whether to support mqtt... no
checking whether to provide built-in manual... yes
checking whether to enable generation of C code... yes
checking whether to use libgcc... no
checking if X/Open network library is required... no
checking for gethostbyname... yes
checking for windows.h... (cached) no
checking for winsock2.h... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for raw monotonic clock_gettime... yes
checking for pkg-config... /usr/bin/pkg-config
checking for zlib options with pkg-config... found
checking for zlib.h... yes
configure: found both libz and libz.h header
checking for BrotliDecoderDecompress in -lbrotlidec... no
checking for brotli/decode.h... no
checking for ZSTD_createDStream in -lzstd... no
checking for zstd.h... no
checking for lber.h... no
checking for ldap.h... no
checking for ldap_ssl.h... no
checking for LDAP libraries... cannot find LDAP libraries
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... yes
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Secure Transport... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for library containing psl_builtin... -lpsl
checking for library containing gsasl_init... no
checking for RTMP_Init in -lrtmp... no
checking whether versioned symbols are wanted... no
checking whether to enable Windows native IDN (Windows native builds only)... no
checking whether to build with libidn2... (assumed) yes
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libidn2 options with pkg-config... no
configure: IDN_LIBS: "-lidn2"
configure: IDN_LDFLAGS: ""
configure: IDN_CPPFLAGS: ""
configure: IDN_DIR: ""
checking if idn2_lookup_ul can be linked... no
checking for idn2.h... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libnghttp2 options with pkg-config... no
checking for nghttp2_session_get_stream_local_window_size in -lnghttp2... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for fish options with pkg-config... no
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for sys/select.h... yes
checking for sys/socket.h... yes
checking for sys/ioctl.h... yes
checking for unistd.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for arpa/inet.h... yes
checking for net/if.h... yes
checking for netinet/in.h... yes
checking for netinet/in6.h... no
checking for sys/un.h... yes
checking for linux/tcp.h... yes
checking for netinet/tcp.h... yes
checking for netinet/udp.h... yes
checking for netdb.h... yes
checking for sys/sockio.h... no
checking for sys/stat.h... (cached) yes
checking for sys/param.h... yes
checking for termios.h... yes
checking for termio.h... yes
checking for fcntl.h... yes
checking for io.h... no
checking for pwd.h... yes
checking for utime.h... yes
checking for sys/utime.h... no
checking for sys/poll.h... yes
checking for poll.h... yes
checking for socket.h... no
checking for sys/resource.h... yes
checking for libgen.h... yes
checking for locale.h... yes
checking for stdbool.h... yes
checking for sys/filio.h... no
checking for sys/wait.h... yes
checking for setjmp.h... yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for struct timeval... yes
checking run-time libs availability... fine
checking size of size_t... 8
checking size of long... 8
checking size of int... 4
checking size of time_t... 8
checking size of off_t... 8
checking size of curl_off_t... 8
checking size of curl_socket_t... 4
checking for long long... yes
checking for ssize_t... yes
checking for bool... yes
checking for sa_family_t... yes
checking for suseconds_t... yes
checking if time_t is unsigned... no
checking for sys/types.h... (cached) yes
checking for poll.h... (cached) yes
checking for sys/poll.h... (cached) yes
checking for in_addr_t... yes
checking for struct sockaddr_storage... yes
checking for sys/select.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for select... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for recv... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for send... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for MSG_NOSIGNAL... yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking if alarm can be linked... yes
checking if alarm is prototyped... yes
checking if alarm is compilable... yes
checking if alarm usage allowed... yes
checking if alarm might be used... yes
checking for sys/types.h... (cached) yes
checking for strings.h... (cached) yes
checking for sys/types.h... (cached) yes
checking for libgen.h... (cached) yes
checking if basename can be linked... yes
checking if basename is prototyped... yes
checking if basename is compilable... yes
checking if basename usage allowed... yes
checking if basename might be used... yes
checking for sys/types.h... (cached) yes
checking for socket.h... (cached) no
checking if closesocket can be linked... no
checking if closesocket might be used... no
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking if CloseSocket can be linked... no
checking if CloseSocket might be used... no
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking for fcntl.h... (cached) yes
checking if fcntl can be linked... yes
checking if fcntl is prototyped... yes
checking if fcntl is compilable... yes
checking if fcntl usage allowed... yes
checking if fcntl might be used... yes
checking if fcntl O_NONBLOCK is compilable... yes
checking if fcntl O_NONBLOCK usage allowed... yes
checking if fcntl O_NONBLOCK might be used... yes
checking for windows.h... (cached) no
checking for winsock2.h... (cached) no
checking for ws2tcpip.h... (cached) no
checking for sys/types.h... (cached) yes
checking for netdb.h... (cached) yes
checking if freeaddrinfo can be linked... yes
checking if freeaddrinfo is prototyped... yes
checking if freeaddrinfo is compilable... yes
checking if freeaddrinfo usage allowed... yes
checking if freeaddrinfo might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/xattr.h... yes
checking if fsetxattr can be linked... yes
checking if fsetxattr is prototyped... yes
checking if fsetxattr takes 5 args.... yes
checking if fsetxattr is compilable... yes
checking if fsetxattr usage allowed... yes
checking if fsetxattr might be used... yes
checking if ftruncate can be linked... yes
checking if ftruncate is prototyped... yes
checking if ftruncate is compilable... yes
checking if ftruncate usage allowed... yes
checking if ftruncate might be used... yes
checking for sys/types.h... (cached) yes
checking if getaddrinfo can be linked... yes
checking if getaddrinfo is prototyped... yes
checking if getaddrinfo is compilable... yes
checking if getaddrinfo seems to work... yes
checking if getaddrinfo usage allowed... yes
checking if getaddrinfo might be used... yes
checking if getaddrinfo is threadsafe... yes
checking if gethostbyname can be linked... yes
checking if gethostbyname is prototyped... yes
checking if gethostbyname is compilable... yes
checking if gethostbyname usage allowed... yes
checking if gethostbyname might be used... yes
checking if gethostbyname_r can be linked... yes
checking if gethostbyname_r is prototyped... yes
checking if gethostbyname_r takes 3 args.... no
checking if gethostbyname_r takes 5 args.... no
checking if gethostbyname_r takes 6 args.... yes
checking if gethostbyname_r is compilable... yes
checking if gethostbyname_r usage allowed... yes
checking if gethostbyname_r might be used... yes
checking if gethostname can be linked... yes
checking if gethostname is prototyped... yes
checking if gethostname is compilable... yes
checking for gethostname arg 2 data type... size_t
checking if gethostname usage allowed... yes
checking if gethostname might be used... yes
checking if getpeername can be linked... yes
checking if getpeername is prototyped... yes
checking if getpeername is compilable... yes
checking if getpeername usage allowed... yes
checking if getpeername might be used... yes
checking if getsockname can be linked... yes
checking if getsockname is prototyped... yes
checking if getsockname is compilable... yes
checking if getsockname usage allowed... yes
checking if getsockname might be used... yes
checking for net/if.h... (cached) yes
checking if if_nametoindex can be linked... yes
checking if if_nametoindex is prototyped... yes
checking if if_nametoindex is compilable... yes
checking if if_nametoindex usage allowed... yes
checking if if_nametoindex might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for netinet/in.h... (cached) yes
checking for ifaddrs.h... yes
checking if getifaddrs can be linked... yes
checking if getifaddrs is prototyped... yes
checking if getifaddrs is compilable... yes
checking if getifaddrs seems to work... yes
checking if getifaddrs usage allowed... yes
checking if getifaddrs might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking if gmtime_r can be linked... yes
checking if gmtime_r is prototyped... yes
checking if gmtime_r is compilable... yes
checking if gmtime_r seems to work... yes
checking if gmtime_r usage allowed... yes
checking if gmtime_r might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for netinet/in.h... (cached) yes
checking for arpa/inet.h... (cached) yes
checking if inet_ntop can be linked... yes
checking if inet_ntop is prototyped... yes
checking if inet_ntop is compilable... yes
checking if inet_ntop seems to work... yes
checking if inet_ntop usage allowed... yes
checking if inet_ntop might be used... yes
checking if inet_pton can be linked... yes
checking if inet_pton is prototyped... yes
checking if inet_pton is compilable... yes
checking if inet_pton seems to work... yes
checking if inet_pton usage allowed... yes
checking if inet_pton might be used... yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for sys/ioctl.h... (cached) yes
checking for stropts.h... no
checking if ioctl can be linked... yes
checking if ioctl is prototyped... yes
checking if ioctl is compilable... yes
checking if ioctl usage allowed... yes
checking if ioctl might be used... yes
checking if ioctl FIONBIO is compilable... yes
checking if ioctl FIONBIO usage allowed... yes
checking if ioctl FIONBIO might be used... yes
checking if ioctl SIOCGIFADDR is compilable... yes
checking if ioctl SIOCGIFADDR usage allowed... yes
checking if ioctl SIOCGIFADDR might be used... yes
checking if ioctlsocket can be linked... no
checking if ioctlsocket might be used... no
checking if IoctlSocket can be linked... no
checking if IoctlSocket might be used... no
checking if memrchr can be linked... yes
checking if memrchr is prototyped... no
checking if memrchr might be used... no
checking if poll can be linked... yes
checking if poll is prototyped... yes
checking if poll is compilable... yes
checking if poll seems to work... yes
checking if poll usage allowed... yes
checking if poll might be used... yes
checking for sys/types.h... (cached) yes
checking if sigaction can be linked... yes
checking if sigaction is prototyped... yes
checking if sigaction is compilable... yes
checking if sigaction usage allowed... yes
checking if sigaction might be used... yes
checking if siginterrupt can be linked... yes
checking if siginterrupt is prototyped... yes
checking if siginterrupt is compilable... yes
checking if siginterrupt usage allowed... yes
checking if siginterrupt might be used... yes
checking if signal can be linked... yes
checking if signal is prototyped... yes
checking if signal is compilable... yes
checking if signal usage allowed... yes
checking if signal might be used... yes
checking for sys/types.h... (cached) yes
checking if sigsetjmp can be linked... no
checking if sigsetjmp seems a macro... yes
checking if sigsetjmp is compilable... yes
checking if sigsetjmp usage allowed... yes
checking if sigsetjmp might be used... yes
checking if socket can be linked... yes
checking if socket is prototyped... yes
checking if socket is compilable... yes
checking if socket usage allowed... yes
checking if socket might be used... yes
checking if socketpair can be linked... yes
checking if socketpair is prototyped... yes
checking if socketpair is compilable... yes
checking if socketpair usage allowed... yes
checking if socketpair might be used... yes
checking if strcasecmp can be linked... yes
checking if strcasecmp is prototyped... yes
checking if strcasecmp is compilable... yes
checking if strcasecmp usage allowed... yes
checking if strcasecmp might be used... yes
checking if strcmpi can be linked... no
checking if strcmpi might be used... no
checking if strdup can be linked... yes
checking if strdup is prototyped... yes
checking if strdup is compilable... yes
checking if strdup usage allowed... yes
checking if strdup might be used... yes
checking if strerror_r can be linked... yes
checking if strerror_r is prototyped... yes
checking if strerror_r is compilable... yes
checking if strerror_r is glibc like... no
checking if strerror_r is POSIX like... yes
checking if strerror_r seems to work... yes
checking if strerror_r usage allowed... yes
checking if strerror_r might be used... yes
checking if stricmp can be linked... no
checking if stricmp might be used... no
checking if strtok_r can be linked... yes
checking if strtok_r is prototyped... yes
checking if strtok_r is compilable... yes
checking if strtok_r usage allowed... yes
checking if strtok_r might be used... yes
checking if strtoll can be linked... yes
checking if strtoll is prototyped... yes
checking if strtoll is compilable... yes
checking if strtoll usage allowed... yes
checking if strtoll might be used... yes
checking for ccache gcc options needed to detect all undeclared functions... none needed
checking whether getpwuid_r is declared... yes
checking for _fseeki64... no
checking deeper for _fseeki64... but still no
checking for arc4random... no
checking deeper for arc4random... but still no
checking for fnmatch... yes
checking for fseeko... yes
checking for geteuid... yes
checking for getpass_r... no
checking deeper for getpass_r... but still no
checking for getppid... yes
checking for getpwuid... yes
checking for getpwuid_r... yes
checking for getrlimit... yes
checking for gettimeofday... yes
checking for if_nametoindex... yes
checking for mach_absolute_time... no
checking deeper for mach_absolute_time... but still no
checking for pipe... yes
checking for sched_yield... yes
checking for sendmsg... yes
checking for setlocale... yes
checking for setmode... no
checking deeper for setmode... but still no
checking for setrlimit... yes
checking for snprintf... yes
checking for utime... yes
checking for utimes... yes
checking whether fseeko is declared... yes
checking how to set a socket into non-blocking mode... fcntl O_NONBLOCK
checking for perl... /usr/bin/perl
checking for gnroff... no
checking for nroff... /usr/bin/nroff
checking how to use *nroff to get plain text from man pages... -man
checking whether to enable the threaded resolver... yes
checking whether to use POSIX threads for threaded resolver... auto
checking for pthread.h... yes
checking for pthread_create... yes
checking convert -I options to -isystem... yes
checking whether to enable verbose strings... yes
checking whether to enable SSPI support (Windows native builds only)... no
checking whether to enable basic authentication method... yes
checking whether to enable bearer authentication method... yes
checking whether to enable digest authentication method... yes
checking whether to enable kerberos authentication method... yes
checking whether to enable negotiate authentication method... yes
checking whether to enable aws sig methods... yes
checking whether to support NTLM... yes
checking whether to enable NTLM delegation to winbind's helper... no
checking whether to enable TLS-SRP authentication... yes
checking whether to enable Unix domain sockets... auto
checking for struct sockaddr_un.sun_path... yes
checking whether to support cookies... yes
checking whether to support socketpair... yes
checking whether to support HTTP authentication... yes
checking whether to support DoH... yes
checking whether to support the MIME API... yes
checking whether to support binding connections locally... yes
checking whether to support the form API... yes
checking whether to support date parsing... yes
checking whether to support netrc parsing... yes
checking whether to support progress-meter... yes
checking whether to support DNS shuffling... yes
checking whether to support curl_easy_option*... yes
checking whether to support alt-svc... yes
checking whether to support headers-api... yes
configure: disables HSTS due to lack of SSL
checking whether to support WebSockets... no
checking whether hiding of library internal symbols will actually happen... yes
checking if this build supports HTTPS-proxy... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating docs/Makefile
config.status: creating docs/examples/Makefile
config.status: creating docs/libcurl/Makefile
config.status: creating docs/libcurl/opts/Makefile
config.status: creating docs/cmdline-opts/Makefile
config.status: creating include/Makefile
config.status: creating include/curl/Makefile
config.status: creating src/Makefile
config.status: creating lib/Makefile
config.status: creating scripts/Makefile
config.status: creating lib/libcurl.vers
config.status: creating lib/libcurl.plist
config.status: creating tests/Makefile
config.status: creating tests/config
config.status: creating tests/certs/Makefile
config.status: creating tests/certs/scripts/Makefile
config.status: creating tests/data/Makefile
config.status: creating tests/server/Makefile
config.status: creating tests/libtest/Makefile
config.status: creating tests/unit/Makefile
config.status: creating tests/http/config.ini
config.status: creating tests/http/Makefile
config.status: creating tests/http/clients/Makefile
config.status: creating packages/Makefile
config.status: creating packages/vms/Makefile
config.status: creating curl-config
config.status: creating libcurl.pc
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:

Host setup: x86_64-pc-linux-gnu
Install prefix: /usr/local
Compiler: ccache gcc
CFLAGS: -Werror-implicit-function-declaration -O2 -Wno-system-headers
CPPFLAGS:
LDFLAGS:
LIBS: -lpsl -lz

curl version: 8.5.0-DEV
SSL: no (--with-{openssl,gnutls,mbedtls,wolfssl,schannel,secure-transport,amissl,bearssl,rustls} )
SSH: no (--with-{libssh,libssh2})
zlib: enabled
brotli: no (--with-brotli)
zstd: no (--with-zstd)
GSS-API: no (--with-gssapi)
GSASL: no (libgsasl not found)
TLS-SRP: no (--enable-tls-srp)
resolver: POSIX threaded
IPv6: enabled
Unix sockets: enabled
IDN: no (--with-{libidn2,winidn})
Build libcurl: Shared=no, Static=yes
Built-in manual: enabled
--libcurl option: enabled (--disable-libcurl-option)
Verbose errors: enabled (--disable-verbose)
Code coverage: disabled
SSPI: no (--enable-sspi)
ca cert bundle: no
ca cert path:
ca fallback:
LDAP: no (--enable-ldap / --with-ldap-lib / --with-lber-lib)
LDAPS: no (--enable-ldaps)
RTSP: enabled
RTMP: no (--with-librtmp)
PSL: enabled
Alt-svc: enabled (--disable-alt-svc)
Headers API: enabled (--disable-headers-api)
HSTS: no (--enable-hsts)
HTTP1: enabled (internal)
HTTP2: no (--with-nghttp2)
HTTP3: no (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-msh3)
ECH: no (--enable-ech)
WebSockets: no (--enable-websockets)
Protocols: DICT FILE FTP GOPHER HTTP IMAP MQTT POP3 RTSP SMTP TELNET TFTP
Features: AsynchDNS IPv6 Largefile PSL UnixSockets alt-svc libz threadsafe

configure: WARNING: unrecognized options: --disable-docs
configure: WARNING: Cannot find libraries for LDAP support: LDAP disabled
configure: WARNING: libgsasl was not found
configure: WARNING: Cannot find libraries for IDN support: IDN disabled
configure: WARNING: unrecognized options: --disable-docs

$ make -j3
Making all in lib
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
make all-am
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
CC libcurl_la-altsvc.lo
CC libcurl_la-amigaos.lo
CC libcurl_la-asyn-ares.lo
CC libcurl_la-asyn-thread.lo
CC libcurl_la-base64.lo
CC libcurl_la-bufq.lo
CC libcurl_la-bufref.lo
CC libcurl_la-c-hyper.lo
CC libcurl_la-cf-h1-proxy.lo
CC libcurl_la-cf-h2-proxy.lo
CC libcurl_la-cf-haproxy.lo
CC libcurl_la-cf-https-connect.lo
CC libcurl_la-cf-socket.lo
CC libcurl_la-cfilters.lo
CC libcurl_la-conncache.lo
CC libcurl_la-connect.lo
CC libcurl_la-content_encoding.lo
CC libcurl_la-cookie.lo
CC libcurl_la-curl_addrinfo.lo
CC libcurl_la-curl_des.lo
CC libcurl_la-curl_endian.lo
CC libcurl_la-curl_fnmatch.lo
CC libcurl_la-curl_get_line.lo
CC libcurl_la-curl_gethostname.lo
CC libcurl_la-curl_gssapi.lo
CC libcurl_la-curl_memrchr.lo
CC libcurl_la-curl_multibyte.lo
CC libcurl_la-curl_ntlm_core.lo
CC libcurl_la-curl_ntlm_wb.lo
CC libcurl_la-curl_path.lo
CC libcurl_la-curl_range.lo
CC libcurl_la-curl_rtmp.lo
CC libcurl_la-curl_sasl.lo
CC libcurl_la-curl_sspi.lo
CC libcurl_la-curl_threads.lo
CC libcurl_la-curl_trc.lo
CC libcurl_la-dict.lo
CC libcurl_la-doh.lo
CC libcurl_la-dynbuf.lo
CC libcurl_la-dynhds.lo
CC libcurl_la-easy.lo
CC libcurl_la-easygetopt.lo
CC libcurl_la-easyoptions.lo
CC libcurl_la-escape.lo
CC libcurl_la-file.lo
CC libcurl_la-fileinfo.lo
CC libcurl_la-fopen.lo
CC libcurl_la-formdata.lo
CC libcurl_la-ftp.lo
CC libcurl_la-ftplistparser.lo
CC libcurl_la-getinfo.lo
CC libcurl_la-getenv.lo
CC libcurl_la-gopher.lo
CC libcurl_la-hash.lo
CC libcurl_la-headers.lo
CC libcurl_la-hmac.lo
CC libcurl_la-hostasyn.lo
CC libcurl_la-hostip.lo
CC libcurl_la-hostip4.lo
CC libcurl_la-hostip6.lo
CC libcurl_la-hostsyn.lo
CC libcurl_la-hsts.lo
CC libcurl_la-http.lo
CC libcurl_la-http1.lo
CC libcurl_la-http2.lo
CC libcurl_la-http_aws_sigv4.lo
CC libcurl_la-http_chunks.lo
CC libcurl_la-http_digest.lo
CC libcurl_la-http_negotiate.lo
CC libcurl_la-http_ntlm.lo
CC libcurl_la-http_proxy.lo
CC libcurl_la-idn.lo
CC libcurl_la-if2ip.lo
CC libcurl_la-imap.lo
CC libcurl_la-inet_ntop.lo
CC libcurl_la-inet_pton.lo
CC libcurl_la-krb5.lo
CC libcurl_la-ldap.lo
CC libcurl_la-llist.lo
CC libcurl_la-macos.lo
CC libcurl_la-md4.lo
CC libcurl_la-md5.lo
CC libcurl_la-memdebug.lo
CC libcurl_la-mime.lo
CC libcurl_la-mprintf.lo
CC libcurl_la-mqtt.lo
CC libcurl_la-multi.lo
CC libcurl_la-netrc.lo
CC libcurl_la-nonblock.lo
CC libcurl_la-noproxy.lo
CC libcurl_la-openldap.lo
CC libcurl_la-parsedate.lo
CC libcurl_la-pingpong.lo
CC libcurl_la-pop3.lo
CC libcurl_la-progress.lo
CC libcurl_la-psl.lo
CC libcurl_la-rand.lo
CC libcurl_la-rename.lo
CC libcurl_la-rtsp.lo
CC libcurl_la-select.lo
CC libcurl_la-sendf.lo
CC libcurl_la-setopt.lo
CC libcurl_la-sha256.lo
CC libcurl_la-share.lo
CC libcurl_la-slist.lo
CC libcurl_la-smb.lo
CC libcurl_la-smtp.lo
CC libcurl_la-socketpair.lo
CC libcurl_la-socks.lo
CC libcurl_la-socks_gssapi.lo
CC libcurl_la-socks_sspi.lo
CC libcurl_la-speedcheck.lo
CC libcurl_la-splay.lo
CC libcurl_la-strcase.lo
CC libcurl_la-strdup.lo
CC libcurl_la-strerror.lo
CC libcurl_la-strtok.lo
CC libcurl_la-strtoofft.lo
CC libcurl_la-system_win32.lo
CC libcurl_la-telnet.lo
CC libcurl_la-tftp.lo
CC libcurl_la-timediff.lo
CC libcurl_la-timeval.lo
CC libcurl_la-transfer.lo
CC libcurl_la-url.lo
CC libcurl_la-urlapi.lo
CC libcurl_la-version.lo
CC libcurl_la-version_win32.lo
CC libcurl_la-warnless.lo
CC libcurl_la-ws.lo
CC vauth/libcurl_la-cleartext.lo
CC vauth/libcurl_la-cram.lo
CC vauth/libcurl_la-digest.lo
CC vauth/libcurl_la-digest_sspi.lo
CC vauth/libcurl_la-gsasl.lo
CC vauth/libcurl_la-krb5_gssapi.lo
CC vauth/libcurl_la-krb5_sspi.lo
CC vauth/libcurl_la-ntlm.lo
CC vauth/libcurl_la-ntlm_sspi.lo
CC vauth/libcurl_la-oauth2.lo
CC vauth/libcurl_la-spnego_gssapi.lo
CC vauth/libcurl_la-spnego_sspi.lo
CC vauth/libcurl_la-vauth.lo
CC vtls/libcurl_la-bearssl.lo
CC vtls/libcurl_la-gtls.lo
CC vtls/libcurl_la-hostcheck.lo
CC vtls/libcurl_la-keylog.lo
CC vtls/libcurl_la-mbedtls.lo
CC vtls/libcurl_la-mbedtls_threadlock.lo
CC vtls/libcurl_la-openssl.lo
CC vtls/libcurl_la-rustls.lo
CC vtls/libcurl_la-schannel.lo
CC vtls/libcurl_la-schannel_verify.lo
CC vtls/libcurl_la-sectransp.lo
CC vtls/libcurl_la-vtls.lo
CC vtls/libcurl_la-wolfssl.lo
CC vtls/libcurl_la-x509asn1.lo
CC vquic/libcurl_la-curl_msh3.lo
CC vquic/libcurl_la-curl_ngtcp2.lo
CC vquic/libcurl_la-curl_quiche.lo
CC vquic/libcurl_la-vquic.lo
CC vssh/libcurl_la-libssh.lo
CC vssh/libcurl_la-libssh2.lo
CC vssh/libcurl_la-wolfssh.lo
CCLD libcurl.la
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
Making all in src
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/src'
Making all in ../docs
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
Making all in .
make[3]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
if test "..x" != "..x" -a -e "./curl.1"; then \
/usr/bin/install -c -m 644 "./curl.1" /root/asi_db/builds/curl/_worktrees/w0/docs/curl.1 \
&& touch -r "./curl.1" /root/asi_db/builds/curl/_worktrees/w0/docs/curl.1; fi
cd cmdline-opts && make
make[4]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
GENERATE ../../docs/curl.1
make[4]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
make[3]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
Making all in cmdline-opts
make[3]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/src'
CC slist_wc.o
CC tool_bname.o
CC tool_binmode.o
CC tool_cb_dbg.o
CC tool_cb_hdr.o
CC tool_cb_prg.o
CC tool_cb_rea.o
CC tool_cb_wrt.o
CC tool_cb_see.o
CC tool_cfgable.o
CC tool_dirhie.o
CC tool_doswin.o
CC tool_easysrc.o
CC tool_filetime.o
CC tool_findfile.o
CC tool_formparse.o
CC tool_getparam.o
CC tool_getpass.o
CC tool_help.o
CC tool_helpers.o
HUGE tool_hugehelp.c
CC tool_ipfs.o
CC tool_libinfo.o
CC tool_listhelp.o
CC tool_main.o
CC tool_msgs.o
CC tool_operate.o
CC tool_operhlp.o
CC tool_paramhlp.o
CC tool_parsecfg.o
CC tool_progress.o
CC tool_setopt.o
CC tool_sleep.o
CC tool_stderr.o
CC tool_strdup.o
CC tool_urlglob.o
CC tool_util.o
CC tool_vms.o
CC tool_writeout.o
CC tool_writeout_json.o
CC tool_xattr.o
CC var.o
CC ../lib/base64.o
CC ../lib/curl_multibyte.o
CC ../lib/dynbuf.o
CC ../lib/nonblock.o
CC ../lib/strtoofft.o
CC ../lib/timediff.o
CC ../lib/version_win32.o
CC ../lib/warnless.o
CC tool_hugehelp.o
CCLD curl
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/src'
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/src'
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0'

Commit Diff GitHub →

.azure-pipelines.yml +203 -203 .circleci/config.yml +3 -3 .cirrus.yml +7 -7 .github/scripts/spellcheck.yaml +26 -26 .github/workflows/awslc.yml +113 -113 .github/workflows/codeql-analysis.yml +47 -47 .github/workflows/codespell.yml +9 -9 .github/workflows/configure-vs-cmake.yml +22 -22 .github/workflows/distcheck.yml +83 -83 .github/workflows/fuzz.yml +27 -27 .github/workflows/hacktoberfest-accepted.yml +1 -1 .github/workflows/label.yml +3 -3 .github/workflows/linkcheck.yml +11 -11 .github/workflows/linux.yml +391 -391 .github/workflows/linux32.yml +51 -51 .github/workflows/macos.yml +188 -187 .github/workflows/man-examples.yml +7 -7 .github/workflows/ngtcp2-linux.yml +228 -228 .github/workflows/proselint.yml +37 -37 .github/workflows/quiche-linux.yml +169 -169 .github/workflows/reuse.yml +6 -6 .github/workflows/spellcheck.yml +39 -39 .github/workflows/synopsis.yml +5 -5 .github/workflows/torture.yml +51 -51 .github/workflows/wolfssl.yml +62 -62

.azure-pipelines.yml+203 -203

@@ -29,221 +29,221 @@
	trigger:
	branches:
	include:
-	- 'master'
-	- '*/ci'
+	- 'master'
+	- '*/ci'
	paths:
	exclude:
-	- '.circleci/*'
-	- '.cirrus.yml'
-	- '.github/*'
-	- '.github/workflows/*'
-	- 'appveyor.yml'
-	- 'packages/*'
-	- 'plan9/*'
+	- '.circleci/*'
+	- '.cirrus.yml'
+	- '.github/*'
+	- '.github/workflows/*'
+	- 'appveyor.yml'
+	- 'packages/*'
+	- 'plan9/*'

	pr:
	branches:
	include:
-	- 'master'
+	- 'master'
	paths:
	exclude:
-	- '.circleci/*'
-	- '.cirrus.yml'
-	- '.github/*'
-	- '.github/workflows/*'
-	- 'appveyor.yml'
-	- 'packages/*'
-	- 'plan9/*'
+	- '.circleci/*'
+	- '.cirrus.yml'
+	- '.github/*'
+	- '.github/workflows/*'
+	- 'appveyor.yml'
+	- 'packages/*'
+	- 'plan9/*'

	variables:
	MAKEFLAGS: '-j 2'

	stages:

-	##########################################
-	### Linux jobs first
-	##########################################
-
-	- stage: linux
-	dependsOn: []
-	jobs:
-	- job: ubuntu
-	# define defaults to make sure variables are always expanded/replaced
-	variables:
-	install: ''
-	configure: ''
-	tests: '!433'
-	timeoutInMinutes: 60
-	pool:
-	vmImage: 'ubuntu-latest'
-	strategy:
-	matrix:
-	default:
-	name: default
-	install:
-	configure: --enable-debug --with-openssl
-	disable_ipv6:
-	name: w/o IPv6
-	configure: --disable-ipv6 --with-openssl
-	disable_http_smtp_imap:
-	name: w/o HTTP/SMTP/IMAP
-	configure: --disable-http --disable-smtp --disable-imap --without-ssl
-	disable_thredres:
-	name: sync resolver
-	configure: --disable-threaded-resolver --with-openssl
-	https_only:
-	name: HTTPS only
-	configure: --disable-dict --disable-file --disable-ftp --disable-gopher --disable-imap --disable-ldap --disable-pop3 --disable-rtmp --disable-rtsp --disable-scp --disable-sftp --disable-smb --disable-smtp --disable-telnet --disable-tftp --with-openssl
-	torture:
-	name: torture
-	install: libnghttp2-dev
-	configure: --enable-debug --disable-shared --disable-threaded-resolver --with-openssl
-	tests: -n -t --shallow=25 !FTP
-	steps:
-	- script: sudo apt-get update && sudo apt-get install -y stunnel4 python3-impacket libzstd-dev libbrotli-dev $(install)
-	displayName: 'apt install'
-	retryCountOnTaskFailure: 3
-
-	- script: autoreconf -fi && ./configure --enable-warnings --enable-werror $(configure)
-	displayName: 'configure $(name)'
-
-	- script: make V=1 && make V=1 examples && cd tests && make V=1
-	displayName: 'compile'
-
-	- script: make V=1 test-ci
-	displayName: 'test'
-	env:
-	AZURE_ACCESS_TOKEN: "$(System.AccessToken)"
-	TFLAGS: "-ac /usr/bin/curl -r $(tests)"
-
-	- stage: scanbuild
-	dependsOn: []
-	jobs:
-	- job: ubuntu
-	timeoutInMinutes: 30
-	pool:
-	vmImage: 'ubuntu-latest'
-	steps:
-	- script: sudo apt-get update && sudo apt-get install -y clang-tools clang libssl-dev libssh2-1-dev libpsl-dev libbrotli-dev libzstd-dev
-	displayName: 'apt install'
-	retryCountOnTaskFailure: 3
-
-	- script: autoreconf -fi
-	displayName: 'autoreconf'
-
-	- script: scan-build ./configure --enable-debug --enable-werror --with-openssl --with-libssh2
-	displayName: 'configure'
-	env:
-	CC: "clang"
-	CCX: "clang++"
-
-	- script: scan-build --status-bugs make
-	displayName: 'make'
-
-	- script: scan-build --status-bugs make examples
-	displayName: 'make examples'
-
-	##########################################
-	### Windows jobs below
-	##########################################
-
-	- stage: windows
-	dependsOn: []
-	variables:
-	agent.preferPowerShellOnContainers: true
-	jobs:
-	- job: msys2
-	# define defaults to make sure variables are always expanded/replaced
+	##########################################
+	### Linux jobs first
+	##########################################
+
+	- stage: linux
+	dependsOn: []
+	jobs:
+	- job: ubuntu
+	# define defaults to make sure variables are always expanded/replaced
+	variables:
+	install: ''
+	configure: ''
+	tests: '!433'
+	timeoutInMinutes: 60
+	pool:
+	vmImage: 'ubuntu-latest'
+	strategy:
+	matrix:
+	default:
+	name: default
+	install:
+	configure: --enable-debug --with-openssl
+	disable_ipv6:
+	name: w/o IPv6
+	configure: --disable-ipv6 --with-openssl
+	disable_http_smtp_imap:
+	name: w/o HTTP/SMTP/IMAP
+	configure: --disable-http --disable-smtp --disable-imap --without-ssl
+	disable_thredres:
+	name: sync resolver
+	configure: --disable-threaded-resolver --with-openssl
+	https_only:
+	name: HTTPS only
+	configure: --disable-dict --disable-file --disable-ftp --disable-gopher --disable-imap --disable-ldap --disable-pop3 --disable-rtmp --disable-rtsp --disable-scp --disable-sftp --disable-smb --disable-smtp --disable-telnet --disable-tftp --with-openssl
+	torture:
+	name: torture
+	install: libnghttp2-dev
+	configure: --enable-debug --disable-shared --disable-threaded-resolver --with-openssl
+	tests: -n -t --shallow=25 !FTP
+	steps:
+	- script: sudo apt-get update && sudo apt-get install -y stunnel4 python3-impacket libzstd-dev libbrotli-dev $(install)
+	displayName: 'apt install'
+	retryCountOnTaskFailure: 3
+
+	- script: autoreconf -fi && ./configure --enable-warnings --enable-werror $(configure)
+	displayName: 'configure $(name)'
+
+	- script: make V=1 && make V=1 examples && cd tests && make V=1
+	displayName: 'compile'
+
+	- script: make V=1 test-ci
+	displayName: 'test'
+	env:
+	AZURE_ACCESS_TOKEN: "$(System.AccessToken)"
+	TFLAGS: "-ac /usr/bin/curl -r $(tests)"
+
+	- stage: scanbuild
+	dependsOn: []
+	jobs:
+	- job: ubuntu
+	timeoutInMinutes: 30
+	pool:
+	vmImage: 'ubuntu-latest'
+	steps:
+	- script: sudo apt-get update && sudo apt-get install -y clang-tools clang libssl-dev libssh2-1-dev libpsl-dev libbrotli-dev libzstd-dev
+	displayName: 'apt install'
+	retryCountOnTaskFailure: 3
+
+	- script: autoreconf -fi
+	displayName: 'autoreconf'
+
+	- script: scan-build ./configure --enable-debug --enable-werror --with-openssl --with-libssh2
+	displayName: 'configure'
+	env:
+	CC: "clang"
+	CCX: "clang++"
+
+	- script: scan-build --status-bugs make
+	displayName: 'make'
+
+	- script: scan-build --status-bugs make examples
+	displayName: 'make examples'
+
+	##########################################
+	### Windows jobs below
+	##########################################
+
+	- stage: windows
+	dependsOn: []
	variables:
-	container_img: ''
-	container_cmd: ''
-	configure: ''
-	tests: ''
-	timeoutInMinutes: 120
-	pool:
-	vmImage: 'windows-2019'
-	strategy:
-	matrix:
-	mingw32_openssl:
-	name: 32-bit OpenSSL/libssh2
-	container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw32:ltsc2019
-	container_cmd: C:\msys64\usr\bin\sh
-	prepare: pacman -S --needed --noconfirm --noprogressbar libssh2-devel mingw-w64-i686-libssh2
-	configure: --host=i686-w64-mingw32 --build=i686-w64-mingw32 --prefix=/mingw32 --enable-debug --enable-werror --with-libssh2 --with-openssl
-	tests: "~571"
-	mingw64_openssl:
-	name: 64-bit OpenSSL/libssh2
-	container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw64:ltsc2019
-	container_cmd: C:\msys64\usr\bin\sh
-	prepare: pacman -S --needed --noconfirm --noprogressbar libssh2-devel mingw-w64-x86_64-libssh2
-	configure: --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32 --prefix=/mingw64 --enable-debug --enable-werror --with-libssh2 --with-openssl
-	tests: "~571"
-	mingw64_libssh:
-	name: 64-bit OpenSSL/libssh
-	container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw64:ltsc2019
-	container_cmd: C:\msys64\usr\bin\sh
-	prepare: pacman -S --needed --noconfirm --noprogressbar libssh-devel mingw-w64-x86_64-libssh
-	configure: --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32 --prefix=/mingw64 --enable-debug --enable-werror --with-libssh --with-openssl
-	tests: "~571 ~614"
-	mingw32:
-	name: 32-bit w/o zlib
-	container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw32:ltsc2019
-	container_cmd: C:\msys64\usr\bin\sh
-	configure: --host=i686-w64-mingw32 --build=i686-w64-mingw32 --prefix=/mingw32 --enable-debug --enable-werror --without-zlib --without-ssl
-	tests: "!203 !1143"
-	mingw64:
-	name: 64-bit w/o zlib
-	container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw64:ltsc2019
-	container_cmd: C:\msys64\usr\bin\sh
-	configure: --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32 --prefix=/mingw64 --enable-debug --enable-werror --without-zlib --without-ssl
-	tests: "!203 !1143"
-	mingw32_schannel:
-	name: 32-bit Schannel/SSPI/WinIDN/libssh2
-	container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw32:ltsc2019
-	container_cmd: C:\msys64\usr\bin\sh
-	prepare: pacman -S --needed --noconfirm --noprogressbar libssh2-devel mingw-w64-i686-libssh2
-	configure: --host=i686-w64-mingw32 --build=i686-w64-mingw32 --prefix=/mingw32 --enable-debug --enable-werror --enable-sspi --with-schannel --with-winidn --with-libssh2
-	tests: "~571"
-	mingw64_schannel:
-	name: 64-bit Schannel/SSPI/WinIDN/libssh2
-	container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw64:ltsc2019
-	container_cmd: C:\msys64\usr\bin\sh
-	prepare: pacman -S --needed --noconfirm --noprogressbar libssh2-devel mingw-w64-x86_64-libssh2
-	configure: --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32 --prefix=/mingw64 --enable-debug --enable-werror --enable-sspi --with-schannel --with-winidn --with-libssh2
-	tests: "~571"
-	mingw32_schannel_nozlib:
-	name: 32-bit Schannel/SSPI/WinIDN w/o zlib
-	container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw32:ltsc2019
-	container_cmd: C:\msys64\usr\bin\sh
-	configure: --host=i686-w64-mingw32 --build=i686-w64-mingw32 --prefix=/mingw32 --enable-debug --enable-werror --enable-sspi --with-schannel --with-winidn --without-zlib
-	tests: "!203 !1143"
-	mingw64_schannel_nozlib:
-	name: 64-bit Schannel/SSPI/WinIDN w/o zlib
-	container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw64:ltsc2019
-	container_cmd: C:\msys64\usr\bin\sh
-	configure: --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32 --prefix=/mingw64 --enable-debug --enable-werror --enable-sspi --with-schannel --with-winidn --without-zlib
-	tests: "!203 !1143"
-	container:
-	image: $(container_img)
-	env:
-	MSYS2_PATH_TYPE: inherit
-	steps:
-	- script: $(container_cmd) -l -c "cd $(echo '%cd%') && $(prepare)"
-	displayName: 'prepare'
-	condition: variables.prepare
-	retryCountOnTaskFailure: 3
-
-	- script: $(container_cmd) -l -c "cd $(echo '%cd%') && autoreconf -fi && ./configure $(configure)"
-	displayName: 'configure $(name)'
-
-	- script: $(container_cmd) -l -c "cd $(echo '%cd%') && make V=1 && make V=1 examples && cd tests && make V=1"
-	displayName: 'compile'
-
-	- script: $(container_cmd) -l -c "cd $(echo '%cd%') && make V=1 install && PATH=/usr/bin:/bin find . -type f -path '/.libs/.exe' -print -execdir mv -t .. {} \;"
-	displayName: 'install'
-
-	- script: $(container_cmd) -l -c "cd $(echo '%cd%') && make V=1 test-ci"
-	displayName: 'test'
-	env:
-	AZURE_ACCESS_TOKEN: "$(System.AccessToken)"
-	TFLAGS: "-ac /usr/bin/curl.exe !IDN !SCP ~612 $(tests)"
+	agent.preferPowerShellOnContainers: true
+	jobs:
+	- job: msys2
+	# define defaults to make sure variables are always expanded/replaced
+	variables:
+	container_img: ''
+	container_cmd: ''
+	configure: ''
+	tests: ''
+	timeoutInMinutes: 120
+	pool:
+	vmImage: 'windows-2019'
+	strategy:
+	matrix:
+	mingw32_openssl:
+	name: 32-bit OpenSSL/libssh2
+	container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw32:ltsc2019
+	container_cmd: C:\msys64\usr\bin\sh
+	prepare: pacman -S --needed --noconfirm --noprogressbar libssh2-devel mingw-w64-i686-libssh2
+	configure: --host=i686-w64-mingw32 --build=i686-w64-mingw32 --prefix=/mingw32 --enable-debug --enable-werror --with-libssh2 --with-openssl
+	tests: "~571"
+	mingw64_openssl:
+	name: 64-bit OpenSSL/libssh2
+	container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw64:ltsc2019
+	container_cmd: C:\msys64\usr\bin\sh
+	prepare: pacman -S --needed --noconfirm --noprogressbar libssh2-devel mingw-w64-x86_64-libssh2
+	configure: --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32 --prefix=/mingw64 --enable-debug --enable-werror --with-libssh2 --with-openssl
+	tests: "~571"
+	mingw64_libssh:
+	name: 64-bit OpenSSL/libssh
+	container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw64:ltsc2019
+	container_cmd: C:\msys64\usr\bin\sh
+	prepare: pacman -S --needed --noconfirm --noprogressbar libssh-devel mingw-w64-x86_64-libssh
+	configure: --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32 --prefix=/mingw64 --enable-debug --enable-werror --with-libssh --with-openssl
+	tests: "~571 ~614"
+	mingw32:
+	name: 32-bit w/o zlib
+	container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw32:ltsc2019
+	container_cmd: C:\msys64\usr\bin\sh
+	configure: --host=i686-w64-mingw32 --build=i686-w64-mingw32 --prefix=/mingw32 --enable-debug --enable-werror --without-zlib --without-ssl
+	tests: "!203 !1143"
+	mingw64:
+	name: 64-bit w/o zlib
+	container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw64:ltsc2019
+	container_cmd: C:\msys64\usr\bin\sh
+	configure: --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32 --prefix=/mingw64 --enable-debug --enable-werror --without-zlib --without-ssl
+	tests: "!203 !1143"
+	mingw32_schannel:
+	name: 32-bit Schannel/SSPI/WinIDN/libssh2
+	container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw32:ltsc2019
+	container_cmd: C:\msys64\usr\bin\sh
+	prepare: pacman -S --needed --noconfirm --noprogressbar libssh2-devel mingw-w64-i686-libssh2
+	configure: --host=i686-w64-mingw32 --build=i686-w64-mingw32 --prefix=/mingw32 --enable-debug --enable-werror --enable-sspi --with-schannel --with-winidn --with-libssh2
+	tests: "~571"
+	mingw64_schannel:
+	name: 64-bit Schannel/SSPI/WinIDN/libssh2
+	container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw64:ltsc2019
+	container_cmd: C:\msys64\usr\bin\sh
+	prepare: pacman -S --needed --noconfirm --noprogressbar libssh2-devel mingw-w64-x86_64-libssh2
+	configure: --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32 --prefix=/mingw64 --enable-debug --enable-werror --enable-sspi --with-schannel --with-winidn --with-libssh2
+	tests: "~571"
+	mingw32_schannel_nozlib:
+	name: 32-bit Schannel/SSPI/WinIDN w/o zlib
+	container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw32:ltsc2019
+	container_cmd: C:\msys64\usr\bin\sh
+	configure: --host=i686-w64-mingw32 --build=i686-w64-mingw32 --prefix=/mingw32 --enable-debug --enable-werror --enable-sspi --with-schannel --with-winidn --without-zlib
+	tests: "!203 !1143"
+	mingw64_schannel_nozlib:
+	name: 64-bit Schannel/SSPI/WinIDN w/o zlib
+	container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw64:ltsc2019
+	container_cmd: C:\msys64\usr\bin\sh
+	configure: --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32 --prefix=/mingw64 --enable-debug --enable-werror --enable-sspi --with-schannel --with-winidn --without-zlib
+	tests: "!203 !1143"
+	container:
+	image: $(container_img)
+	env:
+	MSYS2_PATH_TYPE: inherit
+	steps:
+	- script: $(container_cmd) -l -c "cd $(echo '%cd%') && $(prepare)"
+	displayName: 'prepare'
+	condition: variables.prepare
+	retryCountOnTaskFailure: 3
+
+	- script: $(container_cmd) -l -c "cd $(echo '%cd%') && autoreconf -fi && ./configure $(configure)"
+	displayName: 'configure $(name)'
+
+	- script: $(container_cmd) -l -c "cd $(echo '%cd%') && make V=1 && make V=1 examples && cd tests && make V=1"
+	displayName: 'compile'
+
+	- script: $(container_cmd) -l -c "cd $(echo '%cd%') && make V=1 install && PATH=/usr/bin:/bin find . -type f -path '/.libs/.exe' -print -execdir mv -t .. {} \;"
+	displayName: 'install'
+
+	- script: $(container_cmd) -l -c "cd $(echo '%cd%') && make V=1 test-ci"
+	displayName: 'test'
+	env:
+	AZURE_ACCESS_TOKEN: "$(System.AccessToken)"
+	TFLAGS: "-ac /usr/bin/curl.exe !IDN !SCP ~612 $(tests)"

.circleci/config.yml+3 -3

@@ -527,9 +527,9 @@ workflows:

	# There are problem linking with LibreSSL on the CI boxes that prevent this
	# from working.
-	#macos-x86-http-libressl-http2:
-	# jobs:
-	# - macos-x86-http-libressl-http2
+	# macos-x86-http-libressl-http2:
+	# jobs:
+	# - macos-x86-http-libressl-http2

	macos-x86-http-torture:
	jobs:

.cirrus.yml+7 -7

@@ -59,13 +59,13 @@ freebsd_task:
	configure_script:
	- autoreconf -fi
	# Building with the address sanitizer is causing unexplainable test issues due to timeouts
-	#- case `uname -r` in
-	# 12.2*)
-	# export CC=clang;
-	# export CFLAGS="-fsanitize=address,undefined,signed-integer-overflow -fno-sanitize-recover=undefined,integer -Wformat -Werror=format-security -Werror=array-bounds -g";
-	# export CXXFLAGS="-fsanitize=address,undefined -fno-sanitize-recover=undefined,integer -Wformat -Werror=format-security -Werror=array-bounds -g";
-	# export LDFLAGS="-fsanitize=address,undefined -fno-sanitize-recover=undefined,integer" ;;
-	# esac
+	# - case `uname -r` in
+	# 12.2*)
+	# export CC=clang;
+	# export CFLAGS="-fsanitize=address,undefined,signed-integer-overflow -fno-sanitize-recover=undefined,integer -Wformat -Werror=format-security -Werror=array-bounds -g";
+	# export CXXFLAGS="-fsanitize=address,undefined -fno-sanitize-recover=undefined,integer -Wformat -Werror=format-security -Werror=array-bounds -g";
+	# export LDFLAGS="-fsanitize=address,undefined -fno-sanitize-recover=undefined,integer" ;;
+	# esac
	- ./configure --prefix="${HOME}"/install --enable-debug --with-openssl --with-libssh2 --with-brotli --with-gssapi --with-libidn2 --enable-manual --enable-ldap --enable-ldaps --with-librtmp --with-libpsl --with-nghttp2 \|\| { tail -300 config.log; false; }
	compile_script:
	- make V=1 && make V=1 examples && cd tests && make V=1

.github/scripts/spellcheck.yaml+26 -26

@@ -4,29 +4,29 @@
	#
	# Docs: https://github.com/UnicornGlobal/spellcheck-github-actions
	matrix:
-	- name: Markdown
-	expect_match: false
-	apsell:
-	mode: en
-	dictionary:
-	wordlists:
-	- wordlist.txt
-	output: wordlist.dic
-	encoding: utf-8
-	pipeline:
-	- pyspelling.filters.markdown:
-	markdown_extensions:
-	- markdown.extensions.extra:
-	- pyspelling.filters.html:
-	comments: true
-	attributes:
-	- title
-	- alt
-	ignores:
-	- ':matches(code, pre)'
-	- 'code'
-	- 'pre'
-	- 'strong'
-	- 'em'
-	sources:
-	- '*/.md\|!docs/BINDINGS.md'
+	- name: Markdown
+	expect_match: false
+	apsell:
+	mode: en
+	dictionary:
+	wordlists:
+	- wordlist.txt
+	output: wordlist.dic
+	encoding: utf-8
+	pipeline:
+	- pyspelling.filters.markdown:
+	markdown_extensions:
+	- markdown.extensions.extra:
+	- pyspelling.filters.html:
+	comments: true
+	attributes:
+	- title
+	- alt
+	ignores:
+	- ':matches(code, pre)'
+	- 'code'
+	- 'pre'
+	- 'strong'
+	- 'em'
+	sources:
+	- '*/.md\|!docs/BINDINGS.md'

.github/workflows/awslc.yml+113 -113

@@ -7,31 +7,31 @@ name: Linux AWS-LC
	on:
	push:
	branches:
-	- master
-	- '*/ci'
+	- master
+	- '*/ci'
	paths-ignore:
-	- '*/.md'
-	- '.azure-pipelines.yml'
-	- '.circleci/**'
-	- '.cirrus.yml'
-	- 'appveyor.yml'
-	- 'packages/**'
-	- 'plan9/**'
-	- 'projects/**'
-	- 'winbuild/**'
+	- '*/.md'
+	- '.azure-pipelines.yml'
+	- '.circleci/**'
+	- '.cirrus.yml'
+	- 'appveyor.yml'
+	- 'packages/**'
+	- 'plan9/**'
+	- 'projects/**'
+	- 'winbuild/**'
	pull_request:
	branches:
-	- master
+	- master
	paths-ignore:
-	- '*/.md'
-	- '.azure-pipelines.yml'
-	- '.circleci/**'
-	- '.cirrus.yml'
-	- 'appveyor.yml'
-	- 'packages/**'
-	- 'plan9/**'
-	- 'projects/**'
-	- 'winbuild/**'
+	- '*/.md'
+	- '.azure-pipelines.yml'
+	- '.circleci/**'
+	- '.cirrus.yml'
+	- 'appveyor.yml'
+	- 'packages/**'
+	- 'plan9/**'
+	- 'projects/**'
+	- 'winbuild/**'

	concurrency:
	# Hardcoded workflow filename as workflow name above is just Linux again
@@ -51,58 +51,58 @@ jobs:
	timeout-minutes: 30

	steps:
-	- run: \|
-	sudo apt-get update --yes
-	sudo apt-get install --yes libtool autoconf automake pkg-config stunnel4
-	# ensure we don't pick up openssl in this build
-	sudo apt remove --yes libssl-dev
-	sudo python3 -m pip install impacket
-	name: 'install prereqs and impacket'
-
-	- name: cache awslc
-	uses: actions/cache@v3
-	id: cache-awslc
-	env:
-	cache-name: cache-awslc
-	with:
-	path: /home/runner/awslc
-	key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ env.awslc-version }}
-
-	- name: build awslc
-	if: steps.cache-awslc.outputs.cache-hit != 'true'
-	run: \|
-	curl -LOsSf --retry 6 --retry-connrefused --max-time 999 \
-	https://github.com/awslabs/aws-lc/archive/refs/tags/v${{ env.awslc-version }}.tar.gz
-	tar xzf v${{ env.awslc-version }}.tar.gz
-	mkdir aws-lc-${{ env.awslc-version }}-build
-	cd aws-lc-${{ env.awslc-version }}-build
-	cmake -DCMAKE_INSTALL_PREFIX=$HOME/awslc ../aws-lc-${{ env.awslc-version }}
-	cmake --build . --parallel
-	cmake --install .
-
-	- uses: actions/checkout@v4
-
-	- run: autoreconf -fi
-	name: 'autoreconf'
-
-	- run: \|
-	mkdir build
-	cd build
-	../configure --enable-warnings --enable-werror --with-openssl=$HOME/awslc
-	cd ..
-	name: 'configure out-of-tree'
-
-	- run: make -C build V=1
-	name: 'make'
-
-	- run: make -C build V=1 examples
-	name: 'make examples'
-
-	- run: make -C build V=1 -C tests
-	name: 'make tests'
-
-	- run: make -C build V=1 test-ci
-	name: 'run tests'
+	- run: \|
+	sudo apt-get update --yes
+	sudo apt-get install --yes libtool autoconf automake pkg-config stunnel4
+	# ensure we don't pick up openssl in this build
+	sudo apt remove --yes libssl-dev
+	sudo python3 -m pip install impacket
+	name: 'install prereqs and impacket'
+
+	- name: cache awslc
+	uses: actions/cache@v3
+	id: cache-awslc
+	env:
+	cache-name: cache-awslc
+	with:
+	path: /home/runner/awslc
+	key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ env.awslc-version }}
+
+	- name: build awslc
+	if: steps.cache-awslc.outputs.cache-hit != 'true'
+	run: \|
+	curl -LOsSf --retry 6 --retry-connrefused --max-time 999 \
+	https://github.com/awslabs/aws-lc/archive/refs/tags/v${{ env.awslc-version }}.tar.gz
+	tar xzf v${{ env.awslc-version }}.tar.gz
+	mkdir aws-lc-${{ env.awslc-version }}-build
+	cd aws-lc-${{ env.awslc-version }}-build
+	cmake -DCMAKE_INSTALL_PREFIX=$HOME/awslc ../aws-lc-${{ env.awslc-version }}
+	cmake --build . --parallel
+	cmake --install .
+
+	- uses: actions/checkout@v4
+
+	- run: autoreconf -fi
+	name: 'autoreconf'
+
+	- run: \|
+	mkdir build
+	cd build
+	../configure --enable-warnings --enable-werror --with-openssl=$HOME/awslc
+	cd ..
+	name: 'configure out-of-tree'
+
+	- run: make -C build V=1
+	name: 'make'
+
+	- run: make -C build V=1 examples
+	name: 'make examples'
+
+	- run: make -C build V=1 -C tests
+	name: 'make tests'
+
+	- run: make -C build V=1 test-ci
+	name: 'run tests'

	cmake:
	name: awslc (cmake)
@@ -110,43 +110,43 @@ jobs:
	timeout-minutes: 15

	steps:
-	- run: \|
-	sudo apt-get update
-	sudo apt-get install cmake stunnel4
-	# ensure we don't pick up openssl in this build
-	sudo apt remove --yes libssl-dev
-	sudo python3 -m pip install impacket
-	name: 'install prereqs and impacket'
-
-	- name: cache awslc
-	uses: actions/cache@v3
-	id: cache-awslc
-	env:
-	cache-name: cache-awslc
-	with:
-	path: /home/runner/awslc
-	key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ env.awslc-version }}
-
-	- name: build awslc
-	if: steps.cache-awslc.outputs.cache-hit != 'true'
-	run: \|
-	curl -LOsSf --retry 6 --retry-connrefused --max-time 999 \
-	https://github.com/awslabs/aws-lc/archive/refs/tags/v${{ env.awslc-version }}.tar.gz
-	tar xzf v${{ env.awslc-version }}.tar.gz
-	mkdir aws-lc-${{ env.awslc-version }}-build
-	cd aws-lc-${{ env.awslc-version }}-build
-	cmake -DCMAKE_INSTALL_PREFIX=$HOME/awslc ../aws-lc-${{ env.awslc-version }}
-	cmake --build . --parallel
-	cmake --install .
-
-	- uses: actions/checkout@v4
-
-	# CMAKE_COMPILE_WARNING_AS_ERROR is available in cmake 3.24 or later
-	- run: cmake -Bbuild -DOPENSSL_ROOT_DIR=$HOME/awslc -DBUILD_SHARED_LIBS=ON -DCMAKE_COMPILE_WARNING_AS_ERROR=ON .
-	name: 'cmake generate out-of-tree'
-
-	- run: cmake --build build --parallel
-	name: 'cmake build'
-
-	- run: cmake --install build --prefix $HOME/curl --strip
-	name: 'cmake install'
+	- run: \|
+	sudo apt-get update
+	sudo apt-get install cmake stunnel4
+	# ensure we don't pick up openssl in this build
+	sudo apt remove --yes libssl-dev
+	sudo python3 -m pip install impacket
+	name: 'install prereqs and impacket'
+
+	- name: cache awslc
+	uses: actions/cache@v3
+	id: cache-awslc
+	env:
+	cache-name: cache-awslc
+	with:
+	path: /home/runner/awslc
+	key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ env.awslc-version }}
+
+	- name: build awslc
+	if: steps.cache-awslc.outputs.cache-hit != 'true'
+	run: \|
+	curl -LOsSf --retry 6 --retry-connrefused --max-time 999 \
+	https://github.com/awslabs/aws-lc/archive/refs/tags/v${{ env.awslc-version }}.tar.gz
+	tar xzf v${{ env.awslc-version }}.tar.gz
+	mkdir aws-lc-${{ env.awslc-version }}-build
+	cd aws-lc-${{ env.awslc-version }}-build
+	cmake -DCMAKE_INSTALL_PREFIX=$HOME/awslc ../aws-lc-${{ env.awslc-version }}
+	cmake --build . --parallel
+	cmake --install .
+
+	- uses: actions/checkout@v4
+
+	# CMAKE_COMPILE_WARNING_AS_ERROR is available in cmake 3.24 or later
+	- run: cmake -Bbuild -DOPENSSL_ROOT_DIR=$HOME/awslc -DBUILD_SHARED_LIBS=ON -DCMAKE_COMPILE_WARNING_AS_ERROR=ON .
+	name: 'cmake generate out-of-tree'
+
+	- run: cmake --build build --parallel
+	name: 'cmake build'
+
+	- run: cmake --install build --prefix $HOME/curl --strip
+	name: 'cmake install'

.github/workflows/codeql-analysis.yml+47 -47

@@ -7,35 +7,35 @@ name: CodeQL
	on:
	push:
	branches:
-	- master
-	- '*/ci'
+	- master
+	- '*/ci'
	paths-ignore:
-	- '*/.md'
-	- '.azure-pipelines.yml'
-	- '.circleci/**'
-	- '.cirrus.yml'
-	- 'appveyor.yml'
-	- 'docs/**'
-	- 'packages/**'
-	- 'plan9/**'
-	- 'projects/**'
-	- 'tests/data/**'
-	- 'winbuild/**'
+	- '*/.md'
+	- '.azure-pipelines.yml'
+	- '.circleci/**'
+	- '.cirrus.yml'
+	- 'appveyor.yml'
+	- 'docs/**'
+	- 'packages/**'
+	- 'plan9/**'
+	- 'projects/**'
+	- 'tests/data/**'
+	- 'winbuild/**'
	pull_request:
	branches:
-	- master
+	- master
	paths-ignore:
-	- '*/.md'
-	- '.azure-pipelines.yml'
-	- '.circleci/**'
-	- '.cirrus.yml'
-	- 'appveyor.yml'
-	- 'docs/**'
-	- 'packages/**'
-	- 'plan9/**'
-	- 'projects/**'
-	- 'tests/data/**'
-	- 'winbuild/**'
+	- '*/.md'
+	- '.azure-pipelines.yml'
+	- '.circleci/**'
+	- '.cirrus.yml'
+	- 'appveyor.yml'
+	- 'docs/**'
+	- 'packages/**'
+	- 'plan9/**'
+	- 'projects/**'
+	- 'tests/data/**'
+	- 'winbuild/**'
	schedule:
	- cron: '0 0 * * 4'

@@ -50,31 +50,31 @@ jobs:
	permissions:
	security-events: write
	steps:
-	- name: Checkout repository
-	uses: actions/checkout@v4
+	- name: Checkout repository
+	uses: actions/checkout@v4

-	# Initializes the CodeQL tools for scanning.
-	- name: Initialize CodeQL
-	uses: github/codeql-action/init@v2
-	with:
-	languages: cpp
-	queries: security-extended
+	# Initializes the CodeQL tools for scanning.
+	- name: Initialize CodeQL
+	uses: github/codeql-action/init@v2
+	with:
+	languages: cpp
+	queries: security-extended

-	# Autobuild attempts to build any compiled languages (C/C++, C#, or Java).
-	# If this step fails, then you should remove it and run the build manually (see below)
-	- name: Autobuild
-	uses: github/codeql-action/autobuild@v2
+	# Autobuild attempts to build any compiled languages (C/C++, C#, or Java).
+	# If this step fails, then you should remove it and run the build manually (see below)
+	- name: Autobuild
+	uses: github/codeql-action/autobuild@v2

-	# ℹ️ Command-line programs to run using the OS shell.
-	# 📚 https://git.io/JvXDl
+	# ℹ️ Command-line programs to run using the OS shell.
+	# 📚 https://git.io/JvXDl

-	# ✏️ If the Autobuild fails above, remove it and uncomment the following three lines
-	# and modify them (or add more) to build your code if your project
-	# uses a compiled language
+	# ✏️ If the Autobuild fails above, remove it and uncomment the following three lines
+	# and modify them (or add more) to build your code if your project
+	# uses a compiled language

-	#- run: \|
-	# make bootstrap
-	# make release
+	# - run: \|
+	# make bootstrap
+	# make release

-	- name: Perform CodeQL Analysis
-	uses: github/codeql-action/analyze@v2
+	- name: Perform CodeQL Analysis
+	uses: github/codeql-action/analyze@v2

.github/workflows/codespell.yml+9 -9

@@ -7,18 +7,18 @@ name: Codespell
	on:
	push:
	branches:
-	- master
-	- '*/ci'
+	- master
+	- '*/ci'
	paths:
-	- 'lib/**'
-	- 'src/**'
-	- 'include/**'
+	- 'lib/**'
+	- 'src/**'
+	- 'include/**'
	pull_request:
	branches:
-	- master
-	- 'lib/**'
-	- 'src/**'
-	- 'include/**'
+	- master
+	- 'lib/**'
+	- 'src/**'
+	- 'include/**'

	jobs:
	codespell:

.github/workflows/configure-vs-cmake.yml+22 -22

@@ -6,23 +6,23 @@ name: configure-vs-cmake
	on:
	push:
	branches:
-	- master
+	- master
	paths:
-	- '*.ac'
-	- '*/.m4'
-	- '**/CMakeLists.txt'
-	- 'lib/curl_config.h.cmake'
-	- 'scripts/cmp-config.pl'
+	- '*.ac'
+	- '*/.m4'
+	- '**/CMakeLists.txt'
+	- 'lib/curl_config.h.cmake'
+	- 'scripts/cmp-config.pl'

	pull_request:
	branches:
-	- master
+	- master
	paths:
-	- '*.ac'
-	- '*/.m4'
-	- '**/CMakeLists.txt'
-	- 'lib/curl_config.h.cmake'
-	- 'scripts/cmp-config.pl'
+	- '*.ac'
+	- '*/.m4'
+	- '**/CMakeLists.txt'
+	- 'lib/curl_config.h.cmake'
+	- 'scripts/cmp-config.pl'

	permissions: {}

@@ -30,16 +30,16 @@ jobs:
	check:
	runs-on: ubuntu-latest
	steps:
-	- uses: actions/checkout@v4
+	- uses: actions/checkout@v4

-	- name: run configure --with-openssl
-	run: \|
-	autoreconf -fi
-	./configure --with-openssl
+	- name: run configure --with-openssl
+	run: \|
+	autoreconf -fi
+	./configure --with-openssl

-	- name: run cmake
-	run: \|
-	mkdir build && cd build && cmake ..
+	- name: run cmake
+	run: \|
+	mkdir build && cd build && cmake ..

-	- name: compare generated curl_config.h files
-	run: ./scripts/cmp-config.pl lib/curl_config.h build/lib/curl_config.h
+	- name: compare generated curl_config.h files
+	run: ./scripts/cmp-config.pl lib/curl_config.h build/lib/curl_config.h

.github/workflows/distcheck.yml+83 -83

@@ -7,11 +7,11 @@ name: dist
	on:
	push:
	branches:
-	- master
-	- '*/ci'
+	- master
+	- '*/ci'
	pull_request:
	branches:
-	- master
+	- master

	concurrency:
	group: ${{ github.workflow }}-${{ github.event.pull_request.number \|\| github.sha }}
@@ -22,101 +22,101 @@ jobs:
	runs-on: ubuntu-latest
	timeout-minutes: 30
	steps:
-	- uses: actions/checkout@v4
-
-	- run: sudo apt-get purge -y curl libcurl4 libcurl4-doc
-	name: 'remove preinstalled curl libcurl4{-doc}'
-
-	- run: autoreconf -fi
-	name: 'autoreconf'
-
-	- run: ./configure --without-ssl
-	name: 'configure'
-
-	- run: make V=1 && make V=1 clean
-	name: 'make and clean'
-
-	- run: ./maketgz 99.98.97
-	name: 'maketgz'
-
-	- uses: actions/upload-artifact@v3
-	with:
-	name: 'release-tgz'
-	path: 'curl-99.98.97.tar.gz'
-
-	- run: \|
-	echo "::stop-commands::$(uuidgen)"
-	tar xvf curl-99.98.97.tar.gz
-	pushd curl-99.98.97
-	./configure --prefix=$HOME/temp --without-ssl
-	make
-	make TFLAGS=1 test
-	make install
-	popd
-	# basic check of the installed files
-	bash scripts/installcheck.sh $HOME/temp
-	rm -rf curl-99.98.97
-	name: 'verify in-tree configure build including install'
+	- uses: actions/checkout@v4
+
+	- run: sudo apt-get purge -y curl libcurl4 libcurl4-doc
+	name: 'remove preinstalled curl libcurl4{-doc}'
+
+	- run: autoreconf -fi
+	name: 'autoreconf'
+
+	- run: ./configure --without-ssl
+	name: 'configure'
+
+	- run: make V=1 && make V=1 clean
+	name: 'make and clean'
+
+	- run: ./maketgz 99.98.97
+	name: 'maketgz'
+
+	- uses: actions/upload-artifact@v3
+	with:
+	name: 'release-tgz'
+	path: 'curl-99.98.97.tar.gz'
+
+	- run: \|
+	echo "::stop-commands::$(uuidgen)"
+	tar xvf curl-99.98.97.tar.gz
+	pushd curl-99.98.97
+	./configure --prefix=$HOME/temp --without-ssl
+	make
+	make TFLAGS=1 test
+	make install
+	popd
+	# basic check of the installed files
+	bash scripts/installcheck.sh $HOME/temp
+	rm -rf curl-99.98.97
+	name: 'verify in-tree configure build including install'

	verify-out-of-tree-docs:
	runs-on: ubuntu-latest
	timeout-minutes: 30
	needs: maketgz-and-verify-in-tree
	steps:
-	- uses: actions/download-artifact@v3
-	with:
-	name: 'release-tgz'
-
-	- run: \|
-	echo "::stop-commands::$(uuidgen)"
-	tar xvf curl-99.98.97.tar.gz
-	touch curl-99.98.97/docs/{cmdline-opts,libcurl}/Makefile.inc
-	mkdir build
-	pushd build
-	../curl-99.98.97/configure --without-ssl
-	make
-	make TFLAGS='-p 1 1139' test
-	popd
-	rm -rf build
-	rm -rf curl-99.98.97
-	name: 'verify out-of-tree configure build including docs'
+	- uses: actions/download-artifact@v3
+	with:
+	name: 'release-tgz'
+
+	- run: \|
+	echo "::stop-commands::$(uuidgen)"
+	tar xvf curl-99.98.97.tar.gz
+	touch curl-99.98.97/docs/{cmdline-opts,libcurl}/Makefile.inc
+	mkdir build
+	pushd build
+	../curl-99.98.97/configure --without-ssl
+	make
+	make TFLAGS='-p 1 1139' test
+	popd
+	rm -rf build
+	rm -rf curl-99.98.97
+	name: 'verify out-of-tree configure build including docs'

	verify-out-of-tree-autotools-debug:
	runs-on: ubuntu-latest
	timeout-minutes: 30
	needs: maketgz-and-verify-in-tree
	steps:
-	- uses: actions/download-artifact@v3
-	with:
-	name: 'release-tgz'
-
-	- run: \|
-	echo "::stop-commands::$(uuidgen)"
-	tar xvf curl-99.98.97.tar.gz
-	pushd curl-99.98.97
-	mkdir build
-	pushd build
-	../configure --without-ssl --enable-debug "--prefix=${PWD}/pkg"
-	make -j3
-	make -j3 TFLAGS=1279 test
-	make -j3 install
-	name: 'verify out-of-tree autotools debug build'
+	- uses: actions/download-artifact@v3
+	with:
+	name: 'release-tgz'
+
+	- run: \|
+	echo "::stop-commands::$(uuidgen)"
+	tar xvf curl-99.98.97.tar.gz
+	pushd curl-99.98.97
+	mkdir build
+	pushd build
+	../configure --without-ssl --enable-debug "--prefix=${PWD}/pkg"
+	make -j3
+	make -j3 TFLAGS=1279 test
+	make -j3 install
+	name: 'verify out-of-tree autotools debug build'

	verify-out-of-tree-cmake:
	runs-on: ubuntu-latest
	timeout-minutes: 30
	needs: maketgz-and-verify-in-tree
	steps:
-	- uses: actions/download-artifact@v3
-	with:
-	name: 'release-tgz'
-
-	- run: \|
-	echo "::stop-commands::$(uuidgen)"
-	tar xvf curl-99.98.97.tar.gz
-	pushd curl-99.98.97
-	mkdir build
-	pushd build
-	cmake ..
-	make
-	name: 'verify out-of-tree cmake build'
+	- uses: actions/download-artifact@v3
+	with:
+	name: 'release-tgz'
+
+	- run: \|
+	echo "::stop-commands::$(uuidgen)"
+	tar xvf curl-99.98.97.tar.gz
+	pushd curl-99.98.97
+	mkdir build
+	pushd build
+	cmake ..
+	make
+	name: 'verify out-of-tree cmake build'

.github/workflows/fuzz.yml+27 -27

@@ -7,37 +7,37 @@ name: Fuzzer
	on:
	push:
	branches:
-	- master
-	- '*/ci'
+	- master
+	- '*/ci'
	paths-ignore:
-	- '*/.md'
-	- '**/CMakeLists.txt'
-	- '.azure-pipelines.yml'
-	- '.circleci/**'
-	- '.cirrus.yml'
-	- 'appveyor.yml'
-	- 'CMake/**'
-	- 'packages/**'
-	- 'plan9/**'
-	- 'projects/**'
-	- 'tests/data/**'
-	- 'winbuild/**'
+	- '*/.md'
+	- '**/CMakeLists.txt'
+	- '.azure-pipelines.yml'
+	- '.circleci/**'
+	- '.cirrus.yml'
+	- 'appveyor.yml'
+	- 'CMake/**'
+	- 'packages/**'
+	- 'plan9/**'
+	- 'projects/**'
+	- 'tests/data/**'
+	- 'winbuild/**'
	pull_request:
	branches:
-	- master
+	- master
	paths-ignore:
-	- '*/.md'
-	- '**/CMakeLists.txt'
-	- '.azure-pipelines.yml'
-	- '.circleci/**'
-	- '.cirrus.yml'
-	- 'appveyor.yml'
-	- 'CMake/**'
-	- 'packages/**'
-	- 'plan9/**'
-	- 'projects/**'
-	- 'tests/data/**'
-	- 'winbuild/**'
+	- '*/.md'
+	- '**/CMakeLists.txt'
+	- '.azure-pipelines.yml'
+	- '.circleci/**'
+	- '.cirrus.yml'
+	- 'appveyor.yml'
+	- 'CMake/**'
+	- 'packages/**'
+	- 'plan9/**'
+	- 'projects/**'
+	- 'tests/data/**'
+	- 'winbuild/**'

	concurrency:
	group: ${{ github.workflow }}-${{ github.event.pull_request.number \|\| github.sha }}

.github/workflows/hacktoberfest-accepted.yml+1 -1

@@ -8,7 +8,7 @@ on:
	# this must not ever run on any other branch than master
	push:
	branches:
-	- master
+	- master

	concurrency:
	# this should not run in parallel, so just run one at a time

.github/workflows/label.yml+3 -3

@@ -21,6 +21,6 @@ jobs:
	pull-requests: write

	steps:
-	- uses: actions/labeler@v5
-	with:
-	repo-token: "${{ secrets.GITHUB_TOKEN }}"
+	- uses: actions/labeler@v5
+	with:
+	repo-token: "${{ secrets.GITHUB_TOKEN }}"

.github/workflows/linkcheck.yml+11 -11

@@ -7,17 +7,17 @@ name: Markdown links
	on:
	push:
	branches:
-	- master
-	- '*/ci'
+	- master
+	- '*/ci'
	paths:
-	- '.github/workflows/linkcheck.yml'
-	- '**.md'
+	- '.github/workflows/linkcheck.yml'
+	- '**.md'
	pull_request:
	branches:
-	- master
+	- master
	paths:
-	- '.github/workflows/linkcheck.yml'
-	- '**.md'
+	- '.github/workflows/linkcheck.yml'
+	- '**.md'

	concurrency:
	group: ${{ github.workflow }}-${{ github.event.pull_request.number \|\| github.sha }}
@@ -30,7 +30,7 @@ jobs:
	check:
	runs-on: ubuntu-latest
	steps:
-	- uses: actions/checkout@v4
-	- uses: gaurav-nelson/github-action-markdown-link-check@v1
-	with:
-	use-quiet-mode: 'yes'
+	- uses: actions/checkout@v4
+	- uses: gaurav-nelson/github-action-markdown-link-check@v1
+	with:
+	use-quiet-mode: 'yes'

.github/workflows/linux.yml+391 -391

@@ -7,31 +7,31 @@ name: Linux
	on:
	push:
	branches:
-	- master
-	- '*/ci'
+	- master
+	- '*/ci'
	paths-ignore:
-	- '*/.md'
-	- '.azure-pipelines.yml'
-	- '.circleci/**'
-	- '.cirrus.yml'
-	- 'appveyor.yml'
-	- 'packages/**'
-	- 'plan9/**'
-	- 'projects/**'
-	- 'winbuild/**'
+	- '*/.md'
+	- '.azure-pipelines.yml'
+	- '.circleci/**'
+	- '.cirrus.yml'
+	- 'appveyor.yml'
+	- 'packages/**'
+	- 'plan9/**'
+	- 'projects/**'
+	- 'winbuild/**'
	pull_request:
	branches:
-	- master
+	- master
	paths-ignore:
-	- '*/.md'
-	- '.azure-pipelines.yml'
-	- '.circleci/**'
-	- '.cirrus.yml'
-	- 'appveyor.yml'
-	- 'packages/**'
-	- 'plan9/**'
-	- 'projects/**'
-	- 'winbuild/**'
+	- '*/.md'
+	- '.azure-pipelines.yml'
+	- '.circleci/**'
+	- '.cirrus.yml'
+	- 'appveyor.yml'
+	- 'packages/**'
+	- 'plan9/**'
+	- 'projects/**'
+	- 'winbuild/**'

	concurrency:
	group: ${{ github.workflow }}-${{ github.event.pull_request.number \|\| github.sha }}
@@ -60,375 +60,375 @@ jobs:
	fail-fast: false
	matrix:
	build:
-	- name: bearssl
-	install_packages: zlib1g-dev valgrind
-	install_steps: bearssl pytest
-	configure: LDFLAGS="-Wl,-rpath,$HOME/bearssl/lib" --with-bearssl=$HOME/bearssl --enable-debug
-	singleuse: --unit
-
-	- name: bearssl-clang
-	install_packages: zlib1g-dev clang
-	install_steps: bearssl
-	configure: CC=clang LDFLAGS="-Wl,-rpath,$HOME/bearssl/lib" --with-bearssl=$HOME/bearssl --enable-debug
-	singleuse: --unit
-
-	- name: libressl
-	install_packages: zlib1g-dev valgrind
-	install_steps: libressl pytest
-	configure: LDFLAGS="-Wl,-rpath,$HOME/libressl/lib" --with-openssl=$HOME/libressl --enable-debug
-	singleuse: --unit
-
-	- name: libressl-clang
-	install_packages: zlib1g-dev clang
-	install_steps: libressl
-	configure: CC=clang LDFLAGS="-Wl,-rpath,$HOME/libressl/lib" --with-openssl=$HOME/libressl --enable-debug
-	singleuse: --unit
-
-	- name: mbedtls
-	install_packages: libnghttp2-dev valgrind
-	install_steps: mbedtls pytest
-	configure: LDFLAGS="-Wl,-rpath,$HOME/mbedtls/lib" --with-mbedtls=$HOME/mbedtls --enable-debug
-	singleuse: --unit
-
-	- name: mbedtls-clang
-	install_packages: libnghttp2-dev clang
-	install_steps: mbedtls
-	configure: CC=clang LDFLAGS="-Wl,-rpath,$HOME/mbedtls/lib" --with-mbedtls=$HOME/mbedtls --enable-debug
-	singleuse: --unit
-
-	- name: msh3
-	install_packages: zlib1g-dev valgrind
-	install_steps: quictls msh3
-	configure: LDFLAGS="-Wl,-rpath,$HOME/msh3/lib -Wl,-rpath,$HOME/quictls/lib" --with-msh3=$HOME/msh3 --with-openssl=$HOME/quictls --enable-debug
-	singleuse: --unit
-
-	- name: openssl3
-	install_packages: zlib1g-dev valgrind
-	install_steps: gcc-11 openssl3 pytest
-	configure: CFLAGS=-std=gnu89 LDFLAGS="-Wl,-rpath,$HOME/openssl3/lib64" --with-openssl=$HOME/openssl3 --enable-debug --enable-websockets
-	singleuse: --unit
-
-	- name: openssl3-O3
-	install_packages: zlib1g-dev valgrind
-	install_steps: gcc-11 openssl3
-	configure: CFLAGS=-O3 LDFLAGS="-Wl,-rpath,$HOME/openssl3/lib64" --with-openssl=$HOME/openssl3 --enable-debug --enable-websockets
-	singleuse: --unit
-
-	- name: openssl3-clang
-	install_packages: zlib1g-dev clang
-	install_steps: openssl3
-	configure: CC=clang LDFLAGS="-Wl,-rpath,$HOME/openssl3/lib64" --with-openssl=$HOME/openssl3 --enable-debug --enable-websockets
-	singleuse: --unit
-
-	- name: address-sanitizer
-	install_packages: zlib1g-dev libssh2-1-dev clang libssl-dev libubsan1 libasan8 libtsan2
-	install_steps: pytest
-	configure: >
-	CC=clang
-	CFLAGS="-fsanitize=address,undefined,signed-integer-overflow -fno-sanitize-recover=undefined,integer -Wformat -Werror=format-security -Werror=array-bounds -g"
-	LDFLAGS="-fsanitize=address,undefined -fno-sanitize-recover=undefined,integer"
-	LIBS="-ldl -lubsan"
-	--with-openssl --enable-debug --enable-websockets
-	singleuse: --unit
-
-	- name: memory-sanitizer
-	install_packages: clang
-	install_steps:
-	configure: >
-	CC=clang
-	CFLAGS="-fsanitize=memory -Wformat -Werror=format-security -Werror=array-bounds -g"
-	LDFLAGS="-fsanitize=memory"
-	LIBS="-ldl"
-	--without-ssl --without-zlib --without-brotli --without-zstd --without-libpsl --without-nghttp2 --enable-debug --enable-websocketsx
-	singleuse: --unit
-
-	- name: event-based
-	install_packages: libssh-dev valgrind
-	configure: --enable-debug --disable-shared --disable-threaded-resolver --with-libssh --with-openssl
-	tflags: -n -e '!TLS-SRP'
-	singleuse: --unit
-
-	- name: hyper
-	install_steps: rust hyper valgrind
-	configure: LDFLAGS="-Wl,-rpath,$HOME/hyper/target/debug" --with-openssl --with-hyper=$HOME/hyper --enable-debug --enable-websockets
-	singleuse: --unit
-
-	- name: rustls
-	install_steps: rust rustls pytest valgrind
-	configure: --with-rustls=$HOME/rustls --enable-debug
-	singleuse: --unit
-
-	- name: Intel compiler - without SSL
-	install_packages: zlib1g-dev valgrind
-	install_steps: intel
-	configure: CC=icc --enable-debug --without-ssl
-	singleuse: --unit
-
-	- name: Intel compiler - OpenSSL
-	install_packages: zlib1g-dev libssl-dev valgrind
-	install_steps: intel
-	configure: CC=icc --enable-debug --with-openssl
-	singleuse: --unit
-
-	- name: Slackware-openssl-with-gssapi-gcc
-	# These are essentially the same flags used to build the curl Slackware package
-	# https://ftpmirror.infania.net/slackware/slackware64-current/source/n/curl/curl.SlackBuild
-	configure: --with-openssl --with-libssh2 --with-gssapi --enable-ares --enable-static=no --without-ca-bundle --with-ca-path=/etc/ssl/certs
-	# Docker Hub image that `container-job` executes in
-	container: 'andy5995/slackware-build-essential:15.0'
-
-	- name: Alpine MUSL
-	configure: --enable-debug --enable-websockets --with-ssl --with-libssh2 --with-libidn2 --with-gssapi --enable-ldap --with-libpsl
-	container: 'alpine:3.18'
-	singleuse: --unit
+	- name: bearssl
+	install_packages: zlib1g-dev valgrind
+	install_steps: bearssl pytest
+	configure: LDFLAGS="-Wl,-rpath,$HOME/bearssl/lib" --with-bearssl=$HOME/bearssl --enable-debug
+	singleuse: --unit
+
+	- name: bearssl-clang
+	install_packages: zlib1g-dev clang
+	install_steps: bearssl
+	configure: CC=clang LDFLAGS="-Wl,-rpath,$HOME/bearssl/lib" --with-bearssl=$HOME/bearssl --enable-debug
+	singleuse: --unit
+
+	- name: libressl
+	install_packages: zlib1g-dev valgrind
+	install_steps: libressl pytest
+	configure: LDFLAGS="-Wl,-rpath,$HOME/libressl/lib" --with-openssl=$HOME/libressl --enable-debug
+	singleuse: --unit
+
+	- name: libressl-clang
+	install_packages: zlib1g-dev clang
+	install_steps: libressl
+	configure: CC=clang LDFLAGS="-Wl,-rpath,$HOME/libressl/lib" --with-openssl=$HOME/libressl --enable-debug
+	singleuse: --unit
+
+	- name: mbedtls
+	install_packages: libnghttp2-dev valgrind
+	install_steps: mbedtls pytest
+	configure: LDFLAGS="-Wl,-rpath,$HOME/mbedtls/lib" --with-mbedtls=$HOME/mbedtls --enable-debug
+	singleuse: --unit
+
+	- name: mbedtls-clang
+	install_packages: libnghttp2-dev clang
+	install_steps: mbedtls
+	configure: CC=clang LDFLAGS="-Wl,-rpath,$HOME/mbedtls/lib" --with-mbedtls=$HOME/mbedtls --enable-debug
+	singleuse: --unit
+
+	- name: msh3
+	install_packages: zlib1g-dev valgrind
+	install_steps: quictls msh3
+	configure: LDFLAGS="-Wl,-rpath,$HOME/msh3/lib -Wl,-rpath,$HOME/quictls/lib" --with-msh3=$HOME/msh3 --with-openssl=$HOME/quictls --enable-debug
+	singleuse: --unit
+
+	- name: openssl3
+	install_packages: zlib1g-dev valgrind
+	install_steps: gcc-11 openssl3 pytest
+	configure: CFLAGS=-std=gnu89 LDFLAGS="-Wl,-rpath,$HOME/openssl3/lib64" --with-openssl=$HOME/openssl3 --enable-debug --enable-websockets
+	singleuse: --unit
+
+	- name: openssl3-O3
+	install_packages: zlib1g-dev valgrind
+	install_steps: gcc-11 openssl3
+	configure: CFLAGS=-O3 LDFLAGS="-Wl,-rpath,$HOME/openssl3/lib64" --with-openssl=$HOME/openssl3 --enable-debug --enable-websockets
+	singleuse: --unit
+
+	- name: openssl3-clang
+	install_packages: zlib1g-dev clang
+	install_steps: openssl3
+	configure: CC=clang LDFLAGS="-Wl,-rpath,$HOME/openssl3/lib64" --with-openssl=$HOME/openssl3 --enable-debug --enable-websockets
+	singleuse: --unit
+
+	- name: address-sanitizer
+	install_packages: zlib1g-dev libssh2-1-dev clang libssl-dev libubsan1 libasan8 libtsan2
+	install_steps: pytest
+	configure: >
+	CC=clang
+	CFLAGS="-fsanitize=address,undefined,signed-integer-overflow -fno-sanitize-recover=undefined,integer -Wformat -Werror=format-security -Werror=array-bounds -g"
+	LDFLAGS="-fsanitize=address,undefined -fno-sanitize-recover=undefined,integer"
+	LIBS="-ldl -lubsan"
+	--with-openssl --enable-debug --enable-websockets
+	singleuse: --unit
+
+	- name: memory-sanitizer
+	install_packages: clang
+	install_steps:
+	configure: >
+	CC=clang
+	CFLAGS="-fsanitize=memory -Wformat -Werror=format-security -Werror=array-bounds -g"
+	LDFLAGS="-fsanitize=memory"
+	LIBS="-ldl"
+	--without-ssl --without-zlib --without-brotli --without-zstd --without-libpsl --without-nghttp2 --enable-debug --enable-websocketsx
+	singleuse: --unit
+
+	- name: event-based
+	install_packages: libssh-dev valgrind
+	configure: --enable-debug --disable-shared --disable-threaded-resolver --with-libssh --with-openssl
+	tflags: -n -e '!TLS-SRP'
+	singleuse: --unit
+
+	- name: hyper
+	install_steps: rust hyper valgrind
+	configure: LDFLAGS="-Wl,-rpath,$HOME/hyper/target/debug" --with-openssl --with-hyper=$HOME/hyper --enable-debug --enable-websockets
+	singleuse: --unit
+
+	- name: rustls
+	install_steps: rust rustls pytest valgrind
+	configure: --with-rustls=$HOME/rustls --enable-debug
+	singleuse: --unit
+
+	- name: Intel compiler - without SSL
+	install_packages: zlib1g-dev valgrind
+	install_steps: intel
+	configure: CC=icc --enable-debug --without-ssl
+	singleuse: --unit
+
+	- name: Intel compiler - OpenSSL
+	install_packages: zlib1g-dev libssl-dev valgrind
+	install_steps: intel
+	configure: CC=icc --enable-debug --with-openssl
+	singleuse: --unit
+
+	- name: Slackware-openssl-with-gssapi-gcc
+	# These are essentially the same flags used to build the curl Slackware package
+	# https://ftpmirror.infania.net/slackware/slackware64-current/source/n/curl/curl.SlackBuild
+	configure: --with-openssl --with-libssh2 --with-gssapi --enable-ares --enable-static=no --without-ca-bundle --with-ca-path=/etc/ssl/certs
+	# Docker Hub image that `container-job` executes in
+	container: 'andy5995/slackware-build-essential:15.0'
+
+	- name: Alpine MUSL
+	configure: --enable-debug --enable-websockets --with-ssl --with-libssh2 --with-libidn2 --with-gssapi --enable-ldap --with-libpsl
+	container: 'alpine:3.18'
+	singleuse: --unit

	steps:
-	- if: matrix.build.container == null
-	run: \|
-	sudo apt-get update
-	sudo apt-get install libtool autoconf automake pkg-config stunnel4 libpsl-dev libbrotli-dev libzstd-dev ${{ matrix.build.install_packages }}
-	sudo python3 -m pip install impacket
-	name: 'install prereqs and impacket'
-
-	- if: startsWith(matrix.build.container, 'alpine')
-	run: \|
-	apk add --no-cache build-base autoconf automake libtool perl openssl-dev libssh2-dev zlib-dev brotli-dev zstd-dev libidn2-dev openldap-dev heimdal-dev libpsl-dev py3-impacket py3-asn1 py3-six py3-pycryptodomex perl-time-hires openssh stunnel sudo git
-	name: 'install dependencies'
-
-	- uses: actions/checkout@v4
-
-	- if: contains(matrix.build.install_steps, 'gcc-11')
-	run: \|
-	sudo add-apt-repository ppa:ubuntu-toolchain-r/ppa
-	sudo apt-get update
-	sudo apt-get install gcc-11
-	sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-11 100
-	sudo update-alternatives --set gcc /usr/bin/gcc-11
-	gcc --version
-	name: 'install gcc-11'
-
-	- name: cache bearssl
-	if: contains(matrix.build.install_steps, 'bearssl')
-	uses: actions/cache@v3
-	id: cache-bearssl
-	env:
-	cache-name: cache-bearssl
-	with:
-	path: /home/runner/bearssl
-	key: ${{ runner.os }}-build-${{ env.cache-name }}-bearssl-${{ env.bearssl-version }}
-
-	- name: 'build bearssl'
-	if: contains(matrix.build.install_steps, 'bearssl') && steps.cache-bearssl.outputs.cache-hit != 'true'
-	run: \|
-	curl -LOsSf --retry 6 --retry-connrefused --max-time 999 https://bearssl.org/bearssl-${{ env.bearssl-version }}.tar.gz
-	tar -xzf bearssl-${{ env.bearssl-version }}.tar.gz
-	cd bearssl-${{ env.bearssl-version }}
-	make
-	mkdir -p $HOME/bearssl/lib $HOME/bearssl/include
-	cp inc/*.h $HOME/bearssl/include
-	cp build/libbearssl.* $HOME/bearssl/lib
-
-	- name: cache libressl
-	if: contains(matrix.build.install_steps, 'libressl')
-	uses: actions/cache@v3
-	id: cache-libressl
-	env:
-	cache-name: cache-libressl
-	with:
-	path: /home/runner/libressl
-	key: ${{ runner.os }}-build-${{ env.cache-name }}-libressl-${{ env.libressl-version }}
-
-	- name: 'build libressl'
-	if: contains(matrix.build.install_steps, 'libressl') && steps.cache-libressl.outputs.cache-hit != 'true'
-	run: \|
-	git clone --quiet --depth=1 -b ${{ env.libressl-version }} https://github.com/libressl-portable/portable.git libressl-git
-	cd libressl-git
-	./autogen.sh
-	./configure --prefix=$HOME/libressl
-	make install
-
-	- name: cache mbedtls
-	if: contains(matrix.build.install_steps, 'mbedtls')
-	uses: actions/cache@v3
-	id: cache-mbedtls
-	env:
-	cache-name: cache-mbedtls
-	with:
-	path: /home/runner/mbedtls
-	key: ${{ runner.os }}-build-${{ env.cache-name }}-mbedtls-${{ env.mbedtls-version }}
-
-	- name: 'build mbedtls'
-	if: contains(matrix.build.install_steps, 'mbedtls') && steps.cache-mbedtls.outputs.cache-hit != 'true'
-	run: \|
-	git clone --quiet --depth=1 -b ${{ env.mbedtls-version }} https://github.com/ARMmbed/mbedtls
-	cd mbedtls
-	make DESTDIR=$HOME/mbedtls install
-
-	- name: cache openssl3
-	if: contains(matrix.build.install_steps, 'openssl3')
-	uses: actions/cache@v3
-	id: cache-openssl3
-	env:
-	cache-name: cache-openssl3
-	with:
-	path: /home/runner/openssl3
-	key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ env.openssl3-version }}
-
-	- name: 'install openssl3'
-	if: contains(matrix.build.install_steps, 'openssl3') && steps.cache-openssl3.outputs.cache-hit != 'true'
-	run: \|
-	git clone --quiet --depth=1 -b ${{ env.openssl3-version }} https://github.com/openssl/openssl
-	cd openssl
-	./config enable-tls1_3 --prefix=$HOME/openssl3
-	make -j1 install_sw
-
-	- name: cache quictls
-	if: contains(matrix.build.install_steps, 'quictls')
-	uses: actions/cache@v3
-	id: cache-quictls
-	env:
-	cache-name: cache-quictls
-	with:
-	path: /home/runner/quictls
-	key: ${{ runner.os }}-build-${{ env.cache-name }}-quictls-${{ env.quictls-version }}
-
-	- name: 'build quictls'
-	if: contains(matrix.build.install_steps, 'quictls') && steps.cache-quictls.outputs.cache-hit != 'true'
-	run: \|
-	git clone --quiet --depth=1 -b openssl-${{ env.quictls-version }} https://github.com/quictls/openssl
-	cd openssl
-	./config enable-tls1_3 --prefix=$HOME/quictls --libdir=$HOME/quictls/lib
-	make -j1 install_sw
-
-	- name: cache msh3
-	if: contains(matrix.build.install_steps, 'msh3')
-	uses: actions/cache@v3
-	id: cache-msh3
-	env:
-	cache-name: cache-msh3
-	with:
-	path: /home/runner/msh3
-	key: ${{ runner.os }}-build-${{ env.cache-name }}-msh3-${{ env.msh3-version }}
-
-	- name: 'build msh3'
-	if: contains(matrix.build.install_steps, 'msh3') && steps.cache-msh3.outputs.cache-hit != 'true'
-	run: \|
-	git clone --quiet -b ${{ env.msh3-version }} --depth=1 --recursive https://github.com/nibanks/msh3
-	cd msh3 && mkdir build && cd build
-	cmake -G 'Unix Makefiles' -DCMAKE_BUILD_TYPE=RelWithDebInfo -DCMAKE_INSTALL_PREFIX=$HOME/msh3 ..
-	cmake --build .
-	cmake --install .
-
-	- if: contains(matrix.build.install_steps, 'rust')
-	run: \|
-	cd $HOME
-	curl -sSf --compressed https://sh.rustup.rs/ \| sh -s -- -y
-	source $HOME/.cargo/env
-	rustup toolchain install nightly
-	name: 'install rust'
-
-	- name: cache rustls
-	if: contains(matrix.build.install_steps, 'rustls')
-	uses: actions/cache@v3
-	id: cache-rustls
-	env:
-	cache-name: cache-rustls
-	with:
-	path: /home/runner/rustls
-	key: ${{ runner.os }}-build-${{ env.cache-name }}-rustls-${{ env.rustls-version }}
-
-	- name: 'build rustls'
-	if: contains(matrix.build.install_steps, 'rustls') && steps.cache-rustls.outputs.cache-hit != 'true'
-	run: \|
-	git clone --quiet --depth=1 -b ${{ env.rustls-version }} --recursive https://github.com/rustls/rustls-ffi.git
-	cd rustls-ffi
-	make DESTDIR=$HOME/rustls install
-
-	- if: contains(matrix.build.install_steps, 'hyper')
-	run: \|
-	cd $HOME
-	git clone --quiet --depth=1 https://github.com/hyperium/hyper.git
-	cd $HOME/hyper
-	RUSTFLAGS="--cfg hyper_unstable_ffi" cargo +nightly rustc --features client,http1,http2,ffi -Z unstable-options --crate-type cdylib
-	echo "LD_LIBRARY_PATH=$HOME/hyper/target/debug:/usr/local/lib" >> $GITHUB_ENV
-	name: 'install hyper'
-
-	- if: contains(matrix.build.install_steps, 'intel')
-	run: \|
-	cd /tmp
-	curl -sSf --compressed https://apt.repos.intel.com/intel-gpg-keys/GPG-PUB-KEY-INTEL-SW-PRODUCTS.PUB \| sudo apt-key add -
-	sudo add-apt-repository "deb https://apt.repos.intel.com/oneapi all main"
-	sudo apt install --no-install-recommends intel-oneapi-compiler-dpcpp-cpp-and-cpp-classic
-	source /opt/intel/oneapi/setvars.sh
-	printenv >> $GITHUB_ENV
-	name: 'install Intel compilers'
-
-	- if: contains(matrix.build.install_steps, 'pytest')
-	run: \|
-	sudo apt-get install apache2 apache2-dev libnghttp2-dev
-	sudo python3 -m pip install -r tests/http/requirements.txt
-	name: 'install pytest and apach2-dev'
-
-	- name: cache mod_h2
-	if: contains(matrix.build.install_steps, 'pytest')
-	uses: actions/cache@v3
-	id: cache-mod_h2
-	env:
-	cache-name: cache-mod_h2
-	with:
-	path: /home/runner/mod_h2
-	key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ env.mod_h2-version }}
-
-	- name: 'build mod_h2'
-	if: contains(matrix.build.install_steps, 'pytest') && steps.cache-mod_h2.outputs.cache-hit != 'true'
-	run: \|
-	cd $HOME
-	git clone --quiet --depth=1 -b ${{ env.mod_h2-version }} https://github.com/icing/mod_h2
-	cd mod_h2
-	autoreconf -fi
-	./configure
-	make
-
-	- name: 'install mod_h2'
-	if: contains(matrix.build.install_steps, 'pytest')
-	run: \|
-	cd $HOME/mod_h2
-	sudo make install
-
-	- run: autoreconf -fi
-	name: 'autoreconf'
-
-	- run: ./configure --enable-warnings --enable-werror ${{ matrix.build.configure }}
-	name: 'configure'
-
-	- run: make V=1
-	name: 'make'
-
-	- run: \|
-	git config --global --add safe.directory "*"
-	./scripts/singleuse.pl ${{ matrix.build.singleuse }} lib/.libs/libcurl.a
-	name: single-use function check
-
-	- run: ./src/curl -V
-	name: 'check curl -V output'
-
-	- run: make V=1 examples
-	name: 'make examples'
-
-	- run: make V=1 -C tests
-	name: 'make tests'
-
-	- run: make V=1 test-ci
-	name: 'run tests'
-	env:
-	TFLAGS: "${{ matrix.build.tflags }}"
-
-	- if: contains(matrix.build.install_steps, 'pytest')
-	# run for `tests` directory, so pytest does not pick up any other
-	# packages we might have built here
-	run:
-	pytest -v tests
-	name: 'run pytest'
-	env:
-	TFLAGS: "${{ matrix.build.tflags }}"
-	CURL_CI: github
+	- if: matrix.build.container == null
+	run: \|
+	sudo apt-get update
+	sudo apt-get install libtool autoconf automake pkg-config stunnel4 libpsl-dev libbrotli-dev libzstd-dev ${{ matrix.build.install_packages }}
+	sudo python3 -m pip install impacket
+	name: 'install prereqs and impacket'
+
+	- if: startsWith(matrix.build.container, 'alpine')
+	run: \|
+	apk add --no-cache build-base autoconf automake libtool perl openssl-dev libssh2-dev zlib-dev brotli-dev zstd-dev libidn2-dev openldap-dev heimdal-dev libpsl-dev py3-impacket py3-asn1 py3-six py3-pycryptodomex perl-time-hires openssh stunnel sudo git
+	name: 'install dependencies'
+
+	- uses: actions/checkout@v4
+
+	- if: contains(matrix.build.install_steps, 'gcc-11')
+	run: \|
+	sudo add-apt-repository ppa:ubuntu-toolchain-r/ppa
+	sudo apt-get update
+	sudo apt-get install gcc-11
+	sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-11 100
+	sudo update-alternatives --set gcc /usr/bin/gcc-11
+	gcc --version
+	name: 'install gcc-11'
+
+	- name: cache bearssl
+	if: contains(matrix.build.install_steps, 'bearssl')
+	uses: actions/cache@v3
+	id: cache-bearssl
+	env:
+	cache-name: cache-bearssl
+	with:
+	path: /home/runner/bearssl
+	key: ${{ runner.os }}-build-${{ env.cache-name }}-bearssl-${{ env.bearssl-version }}
+
+	- name: 'build bearssl'
+	if: contains(matrix.build.install_steps, 'bearssl') && steps.cache-bearssl.outputs.cache-hit != 'true'
+	run: \|
+	curl -LOsSf --retry 6 --retry-connrefused --max-time 999 https://bearssl.org/bearssl-${{ env.bearssl-version }}.tar.gz
+	tar -xzf bearssl-${{ env.bearssl-version }}.tar.gz
+	cd bearssl-${{ env.bearssl-version }}
+	make
+	mkdir -p $HOME/bearssl/lib $HOME/bearssl/include
+	cp inc/*.h $HOME/bearssl/include
+	cp build/libbearssl.* $HOME/bearssl/lib
+
+	- name: cache libressl
+	if: contains(matrix.build.install_steps, 'libressl')
+	uses: actions/cache@v3
+	id: cache-libressl
+	env:
+	cache-name: cache-libressl
+	with:
+	path: /home/runner/libressl
+	key: ${{ runner.os }}-build-${{ env.cache-name }}-libressl-${{ env.libressl-version }}
+
+	- name: 'build libressl'
+	if: contains(matrix.build.install_steps, 'libressl') && steps.cache-libressl.outputs.cache-hit != 'true'
+	run: \|
+	git clone --quiet --depth=1 -b ${{ env.libressl-version }} https://github.com/libressl-portable/portable.git libressl-git
+	cd libressl-git
+	./autogen.sh
+	./configure --prefix=$HOME/libressl
+	make install
+
+	- name: cache mbedtls
+	if: contains(matrix.build.install_steps, 'mbedtls')
+	uses: actions/cache@v3
+	id: cache-mbedtls
+	env:
+	cache-name: cache-mbedtls
+	with:
+	path: /home/runner/mbedtls
+	key: ${{ runner.os }}-build-${{ env.cache-name }}-mbedtls-${{ env.mbedtls-version }}
+
+	- name: 'build mbedtls'
+	if: contains(matrix.build.install_steps, 'mbedtls') && steps.cache-mbedtls.outputs.cache-hit != 'true'
+	run: \|
+	git clone --quiet --depth=1 -b ${{ env.mbedtls-version }} https://github.com/ARMmbed/mbedtls
+	cd mbedtls
+	make DESTDIR=$HOME/mbedtls install
+
+	- name: cache openssl3
+	if: contains(matrix.build.install_steps, 'openssl3')
+	uses: actions/cache@v3
+	id: cache-openssl3
+	env:
+	cache-name: cache-openssl3
+	with:
+	path: /home/runner/openssl3
+	key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ env.openssl3-version }}
+
+	- name: 'install openssl3'
+	if: contains(matrix.build.install_steps, 'openssl3') && steps.cache-openssl3.outputs.cache-hit != 'true'
+	run: \|
+	git clone --quiet --depth=1 -b ${{ env.openssl3-version }} https://github.com/openssl/openssl
+	cd openssl
+	./config enable-tls1_3 --prefix=$HOME/openssl3
+	make -j1 install_sw
+
+	- name: cache quictls
+	if: contains(matrix.build.install_steps, 'quictls')
+	uses: actions/cache@v3
+	id: cache-quictls
+	env:
+	cache-name: cache-quictls
+	with:
+	path: /home/runner/quictls
+	key: ${{ runner.os }}-build-${{ env.cache-name }}-quictls-${{ env.quictls-version }}
+
+	- name: 'build quictls'
+	if: contains(matrix.build.install_steps, 'quictls') && steps.cache-quictls.outputs.cache-hit != 'true'
+	run: \|
+	git clone --quiet --depth=1 -b openssl-${{ env.quictls-version }} https://github.com/quictls/openssl
+	cd openssl
+	./config enable-tls1_3 --prefix=$HOME/quictls --libdir=$HOME/quictls/lib
+	make -j1 install_sw
+
+	- name: cache msh3
+	if: contains(matrix.build.install_steps, 'msh3')
+	uses: actions/cache@v3
+	id: cache-msh3
+	env:
+	cache-name: cache-msh3
+	with:
+	path: /home/runner/msh3
+	key: ${{ runner.os }}-build-${{ env.cache-name }}-msh3-${{ env.msh3-version }}
+
+	- name: 'build msh3'
+	if: contains(matrix.build.install_steps, 'msh3') && steps.cache-msh3.outputs.cache-hit != 'true'
+	run: \|
+	git clone --quiet -b ${{ env.msh3-version }} --depth=1 --recursive https://github.com/nibanks/msh3
+	cd msh3 && mkdir build && cd build
+	cmake -G 'Unix Makefiles' -DCMAKE_BUILD_TYPE=RelWithDebInfo -DCMAKE_INSTALL_PREFIX=$HOME/msh3 ..
+	cmake --build .
+	cmake --install .
+
+	- if: contains(matrix.build.install_steps, 'rust')
+	run: \|
+	cd $HOME
+	curl -sSf --compressed https://sh.rustup.rs/ \| sh -s -- -y
+	source $HOME/.cargo/env
+	rustup toolchain install nightly
+	name: 'install rust'
+
+	- name: cache rustls
+	if: contains(matrix.build.install_steps, 'rustls')
+	uses: actions/cache@v3
+	id: cache-rustls
+	env:
+	cache-name: cache-rustls
+	with:
+	path: /home/runner/rustls
+	key: ${{ runner.os }}-build-${{ env.cache-name }}-rustls-${{ env.rustls-version }}
+
+	- name: 'build rustls'
+	if: contains(matrix.build.install_steps, 'rustls') && steps.cache-rustls.outputs.cache-hit != 'true'
+	run: \|
+	git clone --quiet --depth=1 -b ${{ env.rustls-version }} --recursive https://github.com/rustls/rustls-ffi.git
+	cd rustls-ffi
+	make DESTDIR=$HOME/rustls install
+
+	- if: contains(matrix.build.install_steps, 'hyper')
+	run: \|
+	cd $HOME
+	git clone --quiet --depth=1 https://github.com/hyperium/hyper.git
+	cd $HOME/hyper
+	RUSTFLAGS="--cfg hyper_unstable_ffi" cargo +nightly rustc --features client,http1,http2,ffi -Z unstable-options --crate-type cdylib
+	echo "LD_LIBRARY_PATH=$HOME/hyper/target/debug:/usr/local/lib" >> $GITHUB_ENV
+	name: 'install hyper'
+
+	- if: contains(matrix.build.install_steps, 'intel')
+	run: \|
+	cd /tmp
+	curl -sSf --compressed https://apt.repos.intel.com/intel-gpg-keys/GPG-PUB-KEY-INTEL-SW-PRODUCTS.PUB \| sudo apt-key add -
+	sudo add-apt-repository "deb https://apt.repos.intel.com/oneapi all main"
+	sudo apt install --no-install-recommends intel-oneapi-compiler-dpcpp-cpp-and-cpp-classic
+	source /opt/intel/oneapi/setvars.sh
+	printenv >> $GITHUB_ENV
+	name: 'install Intel compilers'
+
+	- if: contains(matrix.build.install_steps, 'pytest')
+	run: \|
+	sudo apt-get install apache2 apache2-dev libnghttp2-dev
+	sudo python3 -m pip install -r tests/http/requirements.txt
+	name: 'install pytest and apach2-dev'
+
+	- name: cache mod_h2
+	if: contains(matrix.build.install_steps, 'pytest')
+	uses: actions/cache@v3
+	id: cache-mod_h2
+	env:
+	cache-name: cache-mod_h2
+	with:
+	path: /home/runner/mod_h2
+	key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ env.mod_h2-version }}
+
+	- name: 'build mod_h2'
+	if: contains(matrix.build.install_steps, 'pytest') && steps.cache-mod_h2.outputs.cache-hit != 'true'
+	run: \|
+	cd $HOME
+	git clone --quiet --depth=1 -b ${{ env.mod_h2-version }} https://github.com/icing/mod_h2
+	cd mod_h2
+	autoreconf -fi
+	./configure
+	make
+
+	- name: 'install mod_h2'
+	if: contains(matrix.build.install_steps, 'pytest')
+	run: \|
+	cd $HOME/mod_h2
+	sudo make install
+
+	- run: autoreconf -fi
+	name: 'autoreconf'
+
+	- run: ./configure --enable-warnings --enable-werror ${{ matrix.build.configure }}
+	name: 'configure'
+
+	- run: make V=1
+	name: 'make'
+
+	- run: \|
+	git config --global --add safe.directory "*"
+	./scripts/singleuse.pl ${{ matrix.build.singleuse }} lib/.libs/libcurl.a
+	name: single-use function check
+
+	- run: ./src/curl -V
+	name: 'check curl -V output'
+
+	- run: make V=1 examples
+	name: 'make examples'
+
+	- run: make V=1 -C tests
+	name: 'make tests'
+
+	- run: make V=1 test-ci
+	name: 'run tests'
+	env:
+	TFLAGS: "${{ matrix.build.tflags }}"
+
+	- if: contains(matrix.build.install_steps, 'pytest')
+	# run for `tests` directory, so pytest does not pick up any other
+	# packages we might have built here
+	run:
+	pytest -v tests
+	name: 'run pytest'
+	env:
+	TFLAGS: "${{ matrix.build.tflags }}"
+	CURL_CI: github

.github/workflows/linux32.yml+51 -51

@@ -7,35 +7,35 @@ name: Linux 32-bit
	on:
	push:
	branches:
-	- master
-	- '*/ci'
+	- master
+	- '*/ci'
	paths-ignore:
-	- '*/.md'
-	- '**/CMakeLists.txt'
-	- '.azure-pipelines.yml'
-	- '.circleci/**'
-	- '.cirrus.yml'
-	- 'appveyor.yml'
-	- 'CMake/**'
-	- 'packages/**'
-	- 'plan9/**'
-	- 'projects/**'
-	- 'winbuild/**'
+	- '*/.md'
+	- '**/CMakeLists.txt'
+	- '.azure-pipelines.yml'
+	- '.circleci/**'
+	- '.cirrus.yml'
+	- 'appveyor.yml'
+	- 'CMake/**'
+	- 'packages/**'
+	- 'plan9/**'
+	- 'projects/**'
+	- 'winbuild/**'
	pull_request:
	branches:
-	- master
+	- master
	paths-ignore:
-	- '*/.md'
-	- '**/CMakeLists.txt'
-	- '.azure-pipelines.yml'
-	- '.circleci/**'
-	- '.cirrus.yml'
-	- 'appveyor.yml'
-	- 'CMake/**'
-	- 'packages/**'
-	- 'plan9/**'
-	- 'projects/**'
-	- 'winbuild/**'
+	- '*/.md'
+	- '**/CMakeLists.txt'
+	- '.azure-pipelines.yml'
+	- '.circleci/**'
+	- '.cirrus.yml'
+	- 'appveyor.yml'
+	- 'CMake/**'
+	- 'packages/**'
+	- 'plan9/**'
+	- 'projects/**'
+	- 'winbuild/**'

	concurrency:
	group: ${{ github.workflow }}-${{ github.event.pull_request.number \|\| github.sha }}
@@ -55,39 +55,39 @@ jobs:
	fail-fast: false
	matrix:
	build:
-	- name: Linux i686
-	install_packages: gcc-11-i686-linux-gnu libssl-dev:i386 zlib1g-dev:i386 libpsl-dev:i386 libbrotli-dev:i386 libzstd-dev:i386
-	configure: --enable-debug --enable-websockets --with-openssl --host=i686-linux-gnu CC=i686-linux-gnu-gcc-11 PKG_CONFIG_PATH=/usr/lib/i386-linux-gnu/pkgconfig CPPFLAGS=-I/usr/include/i386-linux-gnu LDFLAGS=-L/usr/lib/i386-linux-gnu
+	- name: Linux i686
+	install_packages: gcc-11-i686-linux-gnu libssl-dev:i386 zlib1g-dev:i386 libpsl-dev:i386 libbrotli-dev:i386 libzstd-dev:i386
+	configure: --enable-debug --enable-websockets --with-openssl --host=i686-linux-gnu CC=i686-linux-gnu-gcc-11 PKG_CONFIG_PATH=/usr/lib/i386-linux-gnu/pkgconfig CPPFLAGS=-I/usr/include/i386-linux-gnu LDFLAGS=-L/usr/lib/i386-linux-gnu

	steps:
-	- run: \|
-	sudo dpkg --add-architecture i386
-	sudo apt-get update -y
-	sudo apt-get install -y --no-install-suggests --no-install-recommends libtool autoconf automake pkg-config stunnel4 ${{ matrix.build.install_packages }}
-	sudo python3 -m pip install impacket
-	name: 'install prereqs'
+	- run: \|
+	sudo dpkg --add-architecture i386
+	sudo apt-get update -y
+	sudo apt-get install -y --no-install-suggests --no-install-recommends libtool autoconf automake pkg-config stunnel4 ${{ matrix.build.install_packages }}
+	sudo python3 -m pip install impacket
+	name: 'install prereqs'

-	- uses: actions/checkout@v4
+	- uses: actions/checkout@v4

-	- run: autoreconf -fi
-	name: 'autoreconf'
+	- run: autoreconf -fi
+	name: 'autoreconf'

-	- run: ./configure --enable-warnings --enable-werror ${{ matrix.build.configure }}
-	name: 'configure'
+	- run: ./configure --enable-warnings --enable-werror ${{ matrix.build.configure }}
+	name: 'configure'

-	- run: make V=1
-	name: 'make'
+	- run: make V=1
+	name: 'make'

-	- run: ./src/curl -V
-	name: 'check curl -V output'
+	- run: ./src/curl -V
+	name: 'check curl -V output'

-	- run: make V=1 examples
-	name: 'make examples'
+	- run: make V=1 examples
+	name: 'make examples'

-	- run: make V=1 -C tests
-	name: 'make tests'
+	- run: make V=1 -C tests
+	name: 'make tests'

-	- run: make V=1 test-ci
-	name: 'run tests'
-	env:
-	TFLAGS: "${{ matrix.build.tflags }}"
+	- run: make V=1 test-ci
+	name: 'run tests'
+	env:
+	TFLAGS: "${{ matrix.build.tflags }}"

.github/workflows/macos.yml+188 -187

@@ -7,31 +7,31 @@ name: macOS
	on:
	push:
	branches:
-	- master
-	- '*/ci'
+	- master
+	- '*/ci'
	paths-ignore:
-	- '*/.md'
-	- '.azure-pipelines.yml'
-	- '.circleci/**'
-	- '.cirrus.yml'
-	- 'appveyor.yml'
-	- 'packages/**'
-	- 'plan9/**'
-	- 'projects/**'
-	- 'winbuild/**'
+	- '*/.md'
+	- '.azure-pipelines.yml'
+	- '.circleci/**'
+	- '.cirrus.yml'
+	- 'appveyor.yml'
+	- 'packages/**'
+	- 'plan9/**'
+	- 'projects/**'
+	- 'winbuild/**'
	pull_request:
	branches:
-	- master
+	- master
	paths-ignore:
-	- '*/.md'
-	- '.azure-pipelines.yml'
-	- '.circleci/**'
-	- '.cirrus.yml'
-	- 'appveyor.yml'
-	- 'packages/**'
-	- 'plan9/**'
-	- 'projects/**'
-	- 'winbuild/**'
+	- '*/.md'
+	- '.azure-pipelines.yml'
+	- '.circleci/**'
+	- '.cirrus.yml'
+	- 'appveyor.yml'
+	- 'packages/**'
+	- 'plan9/**'
+	- 'projects/**'
+	- 'winbuild/**'

	concurrency:
	group: ${{ github.workflow }}-${{ github.event.pull_request.number \|\| github.sha }}
@@ -52,141 +52,142 @@ jobs:
	fail-fast: false
	matrix:
	build:
-	- name: normal
-	install: nghttp2
-	configure: --without-ssl --enable-websockets
-	macosx-version-min: 10.9
-	- name: debug
-	install: nghttp2
-	configure: --enable-debug --without-ssl --enable-websockets
-	macosx-version-min: 10.9
-	- name: libssh2
-	install: nghttp2 libssh2
-	configure: --enable-debug --with-libssh2 --without-ssl --enable-websockets
-	macosx-version-min: 10.9
-	- name: libssh-c-ares
-	install: openssl nghttp2 libssh
-	configure: --enable-debug --with-libssh --with-openssl=/usr/local/opt/openssl --enable-ares --enable-websockets
-	macosx-version-min: 10.9
-	- name: libssh
-	install: openssl nghttp2 libssh
-	configure: --enable-debug --with-libssh --with-openssl=/usr/local/opt/openssl --enable-websockets
-	macosx-version-min: 10.9
-	- name: c-ares
-	install: nghttp2
-	configure: --enable-debug --enable-ares --without-ssl --enable-websockets
-	macosx-version-min: 10.9
-	- name: HTTP only
-	install: nghttp2
-	configure: \|
-	--enable-debug \
-	--enable-maintainer-mode \
-	--disable-alt-svc \
-	--disable-dict \
-	--disable-file \
-	--disable-ftp \
-	--disable-gopher \
-	--disable-imap \
-	--disable-ldap \
-	--disable-pop3 \
-	--disable-rtmp \
-	--disable-rtsp \
-	--disable-scp \
-	--disable-sftp \
-	--disable-shared \
-	--disable-smb \
-	--disable-smtp \
-	--disable-telnet \
-	--disable-tftp \
-	--disable-unix-sockets \
-	--without-brotli \
-	--without-gssapi \
-	--without-libidn2 \
-	--without-libpsl \
-	--without-librtmp \
-	--without-libssh2 \
-	--without-nghttp2 \
-	--without-ntlm-auth \
-	--without-ssl \
-	--without-zlib \
-	--without-zstd
-	macosx-version-min: 10.15
-	- name: SecureTransport http2
-	install: nghttp2
-	configure: --enable-debug --with-secure-transport --enable-websockets
-	macosx-version-min: 10.8
-	- name: gcc SecureTransport
-	configure: CC=gcc-12 --enable-debug --with-secure-transport --enable-websockets
-	macosx-version-min: 10.8
-	- name: OpenSSL http2
-	install: nghttp2 openssl
-	configure: --enable-debug --with-openssl=/usr/local/opt/openssl --enable-websockets
-	macosx-version-min: 10.9
-	- name: LibreSSL http2
-	install: nghttp2 libressl
-	configure: --enable-debug --with-openssl=/usr/local/opt/libressl --enable-websockets
-	macosx-version-min: 10.9
-	- name: torture
-	install: nghttp2 openssl
-	configure: --enable-debug --disable-shared --disable-threaded-resolver --with-openssl=/usr/local/opt/openssl --enable-websockets
-	tflags: -n -t --shallow=25 !FTP
-	macosx-version-min: 10.9
-	- name: torture-ftp
-	install: nghttp2 openssl
-	configure: --enable-debug --disable-shared --disable-threaded-resolver --with-openssl=/usr/local/opt/openssl --enable-websockets
-	tflags: -n -t --shallow=20 FTP
-	macosx-version-min: 10.9
-	- name: macOS 10.15
-	install: nghttp2 libssh2 openssl
-	configure: --enable-debug --disable-ldap --with-openssl=/usr/local/opt/openssl --enable-websockets
-	macosx-version-min: 10.15
+	- name: normal
+	install: nghttp2
+	configure: --without-ssl --enable-websockets
+	macosx-version-min: 10.9
+	- name: debug
+	install: nghttp2
+	configure: --enable-debug --without-ssl --enable-websockets
+	macosx-version-min: 10.9
+	- name: libssh2
+	install: nghttp2 libssh2
+	configure: --enable-debug --with-libssh2 --without-ssl --enable-websockets
+	macosx-version-min: 10.9
+	- name: libssh-c-ares
+	install: openssl nghttp2 libssh
+	configure: --enable-debug --with-libssh --with-openssl=/usr/local/opt/openssl --enable-ares --enable-websockets
+	macosx-version-min: 10.9
+	- name: libssh
+	install: openssl nghttp2 libssh
+	configure: --enable-debug --with-libssh --with-openssl=/usr/local/opt/openssl --enable-websockets
+	macosx-version-min: 10.9
+	- name: c-ares
+	install: nghttp2
+	configure: --enable-debug --enable-ares --without-ssl --enable-websockets
+	macosx-version-min: 10.9
+	- name: HTTP only
+	install: nghttp2
+	configure: \|
+	--enable-debug \
+	--enable-maintainer-mode \
+	--disable-alt-svc \
+	--disable-dict \
+	--disable-file \
+	--disable-ftp \
+	--disable-gopher \
+	--disable-imap \
+	--disable-ldap \
+	--disable-pop3 \
+	--disable-rtmp \
+	--disable-rtsp \
+	--disable-scp \
+	--disable-sftp \
+	--disable-shared \
+	--disable-smb \
+	--disable-smtp \
+	--disable-telnet \
+	--disable-tftp \
+	--disable-unix-sockets \
+	--without-brotli \
+	--without-gssapi \
+	--without-libidn2 \
+	--without-libpsl \
+	--without-librtmp \
+	--without-libssh2 \
+	--without-nghttp2 \
+	--without-ntlm-auth \
+	--without-ssl \
+	--without-zlib \
+	--without-zstd
+
+	macosx-version-min: 10.15
+	- name: SecureTransport http2
+	install: nghttp2
+	configure: --enable-debug --with-secure-transport --enable-websockets
+	macosx-version-min: 10.8
+	- name: gcc SecureTransport
+	configure: CC=gcc-12 --enable-debug --with-secure-transport --enable-websockets
+	macosx-version-min: 10.8
+	- name: OpenSSL http2
+	install: nghttp2 openssl
+	configure: --enable-debug --with-openssl=/usr/local/opt/openssl --enable-websockets
+	macosx-version-min: 10.9
+	- name: LibreSSL http2
+	install: nghttp2 libressl
+	configure: --enable-debug --with-openssl=/usr/local/opt/libressl --enable-websockets
+	macosx-version-min: 10.9
+	- name: torture
+	install: nghttp2 openssl
+	configure: --enable-debug --disable-shared --disable-threaded-resolver --with-openssl=/usr/local/opt/openssl --enable-websockets
+	tflags: -n -t --shallow=25 !FTP
+	macosx-version-min: 10.9
+	- name: torture-ftp
+	install: nghttp2 openssl
+	configure: --enable-debug --disable-shared --disable-threaded-resolver --with-openssl=/usr/local/opt/openssl --enable-websockets
+	tflags: -n -t --shallow=20 FTP
+	macosx-version-min: 10.9
+	- name: macOS 10.15
+	install: nghttp2 libssh2 openssl
+	configure: --enable-debug --disable-ldap --with-openssl=/usr/local/opt/openssl --enable-websockets
+	macosx-version-min: 10.15
	steps:
-	- run: echo libtool autoconf automake pkg-config ${{ matrix.build.install }} \| xargs -Ix -n1 echo brew '"x"' > /tmp/Brewfile
-	name: 'brew bundle'
+	- run: echo libtool autoconf automake pkg-config ${{ matrix.build.install }} \| xargs -Ix -n1 echo brew '"x"' > /tmp/Brewfile
+	name: 'brew bundle'

-	# Run this command with retries because of spurious failures seen
-	# while running the tests, for example
-	# https://github.com/curl/curl/runs/4095721123?check_suite_focus=true
-	- run: "while [[ $? == 0 ]]; do for i in 1 2 3; do brew update && brew bundle install --no-lock --file /tmp/Brewfile && break 2 \|\| { echo Error: wait to try again; sleep 10; } done; false Too many retries; done"
-	name: 'brew install'
+	# Run this command with retries because of spurious failures seen
+	# while running the tests, for example
+	# https://github.com/curl/curl/runs/4095721123?check_suite_focus=true
+	- run: "while [[ $? == 0 ]]; do for i in 1 2 3; do brew update && brew bundle install --no-lock --file /tmp/Brewfile && break 2 \|\| { echo Error: wait to try again; sleep 10; } done; false Too many retries; done"
+	name: 'brew install'

-	- run: \|
-	case "${{ matrix.build.install }}" in
-	openssl)
-	;;
-	*)
-	if test -d /usr/local/include/openssl; then
-	brew unlink openssl
-	fi;;
-	esac
-	name: 'brew unlink openssl'
+	- run: \|
+	case "${{ matrix.build.install }}" in
+	openssl)
+	;;
+	*)
+	if test -d /usr/local/include/openssl; then
+	brew unlink openssl
+	fi;;
+	esac
+	name: 'brew unlink openssl'

-	- run: python3 -m pip install impacket
-	name: 'pip3 install'
+	- run: python3 -m pip install impacket
+	name: 'pip3 install'

-	- uses: actions/checkout@v4
+	- uses: actions/checkout@v4

-	- run: autoreconf -fi
-	name: 'autoreconf'
+	- run: autoreconf -fi
+	name: 'autoreconf'

-	- run: ./configure --enable-warnings --enable-werror ${{ matrix.build.configure }}
-	name: 'configure'
-	env:
-	CFLAGS: "-mmacosx-version-min=${{ matrix.build.macosx-version-min }}"
+	- run: ./configure --enable-warnings --enable-werror ${{ matrix.build.configure }}
+	name: 'configure'
+	env:
+	CFLAGS: "-mmacosx-version-min=${{ matrix.build.macosx-version-min }}"

-	- run: make V=1
-	name: 'make'
+	- run: make V=1
+	name: 'make'

-	- run: make V=1 examples
-	name: 'make examples'
+	- run: make V=1 examples
+	name: 'make examples'

-	- run: make V=1 -C tests
-	name: 'make tests'
+	- run: make V=1 -C tests
+	name: 'make tests'

-	- run: make V=1 test-ci
-	name: 'run tests'
-	env:
-	TFLAGS: "${{ matrix.build.tflags }} ~1452"
+	- run: make V=1 test-ci
+	name: 'run tests'
+	env:
+	TFLAGS: "${{ matrix.build.tflags }} ~1452"

	cmake:
	name: cmake ${{ matrix.compiler.CC }} ${{ matrix.build.name }}
@@ -196,47 +197,47 @@ jobs:
	fail-fast: false
	matrix:
	compiler:
-	- CC: clang
-	CXX: clang++
-	CFLAGS: "-mmacosx-version-min=10.15 -Wno-deprecated-declarations"
-	- CC: gcc-12
-	CXX: g++-12
-	CFLAGS: "-mmacosx-version-min=10.15 -Wno-error=undef -Wno-error=conversion"
+	- CC: clang
+	CXX: clang++
+	CFLAGS: "-mmacosx-version-min=10.15 -Wno-deprecated-declarations"
+	- CC: gcc-12
+	CXX: g++-12
+	CFLAGS: "-mmacosx-version-min=10.15 -Wno-error=undef -Wno-error=conversion"
	build:
-	- name: OpenSSL
-	install: nghttp2 openssl
-	generate: -DOPENSSL_ROOT_DIR=/usr/local/opt/openssl -DCMAKE_OSX_DEPLOYMENT_TARGET=10.9
-	- name: LibreSSL
-	install: nghttp2 libressl
-	generate: -DOPENSSL_ROOT_DIR=/usr/local/opt/libressl -DCURL_DISABLE_LDAP=ON -DCURL_DISABLE_LDAPS=ON -DCMAKE_UNITY_BUILD=ON
-	- name: libssh2
-	install: nghttp2 openssl libssh2
-	generate: -DOPENSSL_ROOT_DIR=/usr/local/opt/openssl -DCURL_USE_LIBSSH2=ON -DBUILD_SHARED_LIBS=ON -DBUILD_STATIC_LIBS=ON
-	- name: GnuTLS
-	install: gnutls
-	generate: -DCURL_USE_GNUTLS=ON -DCURL_USE_OPENSSL=OFF -DCURL_DISABLE_LDAP=ON -DCURL_DISABLE_LDAPS=ON -DCMAKE_SHARED_LINKER_FLAGS=-L/usr/local/lib -DCMAKE_EXE_LINKER_FLAGS=-L/usr/local/lib
+	- name: OpenSSL
+	install: nghttp2 openssl
+	generate: -DOPENSSL_ROOT_DIR=/usr/local/opt/openssl -DCMAKE_OSX_DEPLOYMENT_TARGET=10.9
+	- name: LibreSSL
+	install: nghttp2 libressl
+	generate: -DOPENSSL_ROOT_DIR=/usr/local/opt/libressl -DCURL_DISABLE_LDAP=ON -DCURL_DISABLE_LDAPS=ON -DCMAKE_UNITY_BUILD=ON
+	- name: libssh2
+	install: nghttp2 openssl libssh2
+	generate: -DOPENSSL_ROOT_DIR=/usr/local/opt/openssl -DCURL_USE_LIBSSH2=ON -DBUILD_SHARED_LIBS=ON -DBUILD_STATIC_LIBS=ON
+	- name: GnuTLS
+	install: gnutls
+	generate: -DCURL_USE_GNUTLS=ON -DCURL_USE_OPENSSL=OFF -DCURL_DISABLE_LDAP=ON -DCURL_DISABLE_LDAPS=ON -DCMAKE_SHARED_LINKER_FLAGS=-L/usr/local/lib -DCMAKE_EXE_LINKER_FLAGS=-L/usr/local/lib
	steps:
-	- run: echo libtool autoconf automake pkg-config ${{ matrix.build.install }} \| xargs -Ix -n1 echo brew '"x"' > /tmp/Brewfile
-	name: 'brew bundle'
-
-	- run: "while [[ $? == 0 ]]; do for i in 1 2 3; do brew update && brew bundle install --no-lock --file /tmp/Brewfile && break 2 \|\| { echo Error: wait to try again; sleep 10; } done; false Too many retries; done"
-	name: 'brew install'
-
-	- run: \|
-	case "${{ matrix.build.install }}" in
-	openssl)
-	;;
-	*)
-	if test -d /usr/local/include/openssl; then
-	brew unlink openssl
-	fi;;
-	esac
-	name: 'brew unlink openssl'
-
-	- uses: actions/checkout@v4
-
-	- run: cmake -S. -Bbuild -DCURL_WERROR=ON -DPICKY_COMPILER=ON ${{ matrix.build.generate }}
-	name: 'cmake generate'
-
-	- run: cmake --build build
-	name: 'cmake build'
+	- run: echo libtool autoconf automake pkg-config ${{ matrix.build.install }} \| xargs -Ix -n1 echo brew '"x"' > /tmp/Brewfile
+	name: 'brew bundle'
+
+	- run: "while [[ $? == 0 ]]; do for i in 1 2 3; do brew update && brew bundle install --no-lock --file /tmp/Brewfile && break 2 \|\| { echo Error: wait to try again; sleep 10; } done; false Too many retries; done"
+	name: 'brew install'
+
+	- run: \|
+	case "${{ matrix.build.install }}" in
+	openssl)
+	;;
+	*)
+	if test -d /usr/local/include/openssl; then
+	brew unlink openssl
+	fi;;
+	esac
+	name: 'brew unlink openssl'
+
+	- uses: actions/checkout@v4
+
+	- run: cmake -S. -Bbuild -DCURL_WERROR=ON -DPICKY_COMPILER=ON ${{ matrix.build.generate }}
+	name: 'cmake generate'
+
+	- run: cmake --build build
+	name: 'cmake build'

.github/workflows/man-examples.yml+7 -7

@@ -7,17 +7,17 @@ name: manpage examples
	on:
	push:
	branches:
-	- master
-	- '*/ci'
+	- master
+	- '*/ci'
	paths:
-	- 'docs/libcurl/curl_*.3'
-	- 'docs/libcurl/opts/*.3'
+	- 'docs/libcurl/curl_*.3'
+	- 'docs/libcurl/opts/*.3'
	pull_request:
	branches:
-	- master
+	- master
	paths:
-	- 'docs/libcurl/curl_*.3'
-	- 'docs/libcurl/opts/*.3'
+	- 'docs/libcurl/curl_*.3'
+	- 'docs/libcurl/opts/*.3'

	jobs:
	verify:

.github/workflows/ngtcp2-linux.yml+228 -228

@@ -7,35 +7,35 @@ name: ngtcp2-linux
	on:
	push:
	branches:
-	- master
-	- '*/ci'
+	- master
+	- '*/ci'
	paths-ignore:
-	- '*/.md'
-	- '**/CMakeLists.txt'
-	- '.azure-pipelines.yml'
-	- '.circleci/**'
-	- '.cirrus.yml'
-	- 'appveyor.yml'
-	- 'CMake/**'
-	- 'packages/**'
-	- 'plan9/**'
-	- 'projects/**'
-	- 'winbuild/**'
+	- '*/.md'
+	- '**/CMakeLists.txt'
+	- '.azure-pipelines.yml'
+	- '.circleci/**'
+	- '.cirrus.yml'
+	- 'appveyor.yml'
+	- 'CMake/**'
+	- 'packages/**'
+	- 'plan9/**'
+	- 'projects/**'
+	- 'winbuild/**'
	pull_request:
	branches:
-	- master
+	- master
	paths-ignore:
-	- '*/.md'
-	- '**/CMakeLists.txt'
-	- '.azure-pipelines.yml'
-	- '.circleci/**'
-	- '.cirrus.yml'
-	- 'appveyor.yml'
-	- 'CMake/**'
-	- 'packages/**'
-	- 'plan9/**'
-	- 'projects/**'
-	- 'winbuild/**'
+	- '*/.md'
+	- '**/CMakeLists.txt'
+	- '.azure-pipelines.yml'
+	- '.circleci/**'
+	- '.cirrus.yml'
+	- 'appveyor.yml'
+	- 'CMake/**'
+	- 'packages/**'
+	- 'plan9/**'
+	- 'projects/**'
+	- 'winbuild/**'

	concurrency:
	# Hardcoded workflow filename as workflow name above is just Linux again
@@ -63,208 +63,208 @@ jobs:
	fail-fast: false
	matrix:
	build:
-	- name: quictls
-	configure: >-
-	PKG_CONFIG_PATH="$HOME/nghttpx/lib/pkgconfig" LDFLAGS="-Wl,-rpath,$HOME/nghttpx/lib"
-	--with-ngtcp2=$HOME/nghttpx --enable-warnings --enable-werror --enable-debug --disable-ntlm
-	--with-test-nghttpx="$HOME/nghttpx/bin/nghttpx"
-	--with-openssl=$HOME/nghttpx
-	- name: gnutls
-	configure: >-
-	PKG_CONFIG_PATH="$HOME/nghttpx/lib/pkgconfig" LDFLAGS="-Wl,-rpath,$HOME/nghttpx/lib"
-	--with-ngtcp2=$HOME/nghttpx --enable-warnings --enable-werror --enable-debug
-	--with-test-nghttpx="$HOME/nghttpx/bin/nghttpx"
-	--with-gnutls=$HOME/nghttpx
-	- name: wolfssl
-	configure: >-
-	PKG_CONFIG_PATH="$HOME/nghttpx/lib/pkgconfig" LDFLAGS="-Wl,-rpath,$HOME/nghttpx/lib"
-	--with-ngtcp2=$HOME/nghttpx --enable-warnings --enable-werror --enable-debug
-	--with-test-nghttpx="$HOME/nghttpx/bin/nghttpx"
-	--with-wolfssl=$HOME/nghttpx
+	- name: quictls
+	configure: >-
+	PKG_CONFIG_PATH="$HOME/nghttpx/lib/pkgconfig" LDFLAGS="-Wl,-rpath,$HOME/nghttpx/lib"
+	--with-ngtcp2=$HOME/nghttpx --enable-warnings --enable-werror --enable-debug --disable-ntlm
+	--with-test-nghttpx="$HOME/nghttpx/bin/nghttpx"
+	--with-openssl=$HOME/nghttpx
+	- name: gnutls
+	configure: >-
+	PKG_CONFIG_PATH="$HOME/nghttpx/lib/pkgconfig" LDFLAGS="-Wl,-rpath,$HOME/nghttpx/lib"
+	--with-ngtcp2=$HOME/nghttpx --enable-warnings --enable-werror --enable-debug
+	--with-test-nghttpx="$HOME/nghttpx/bin/nghttpx"
+	--with-gnutls=$HOME/nghttpx
+	- name: wolfssl
+	configure: >-
+	PKG_CONFIG_PATH="$HOME/nghttpx/lib/pkgconfig" LDFLAGS="-Wl,-rpath,$HOME/nghttpx/lib"
+	--with-ngtcp2=$HOME/nghttpx --enable-warnings --enable-werror --enable-debug
+	--with-test-nghttpx="$HOME/nghttpx/bin/nghttpx"
+	--with-wolfssl=$HOME/nghttpx

	steps:
-	- run: \|
-	sudo apt-get update
-	sudo apt-get install libtool autoconf automake pkg-config stunnel4 \
-	libpsl-dev libbrotli-dev libzstd-dev zlib1g-dev libev-dev libc-ares-dev \
-	nettle-dev libp11-kit-dev libtspi-dev libunistring-dev guile-2.2-dev libtasn1-bin \
-	libtasn1-6-dev libidn2-0-dev gawk gperf libtss2-dev dns-root-data bison gtk-doc-tools \
-	texinfo texlive texlive-extra-utils autopoint libev-dev \
-	apache2 apache2-dev libnghttp2-dev
-	name: 'install prereqs and impacket, pytest, crypto, apache2'
-
-	- name: cache quictls
-	uses: actions/cache@v3
-	id: cache-quictls-no-deprecated
-	env:
-	cache-name: cache-quictls-no-deprecated
-	with:
-	path: /home/runner/quictls
-	key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ env.quictls-version }}
-
-	- if: steps.cache-quictls-no-deprecated.outputs.cache-hit != 'true'
-	run: \|
-	cd $HOME
-	git clone --quiet --depth=1 -b openssl-${{ env.quictls-version }} https://github.com/quictls/openssl quictls
-	cd quictls
-	./config no-deprecated --prefix=$HOME/nghttpx --libdir=$HOME/nghttpx/lib
-	make
-	name: 'build quictls'
-
-	- run: \|
-	cd $HOME/quictls
-	make -j1 install_sw
-	name: 'install quictls'
-
-
-	- name: cache gnutls
-	uses: actions/cache@v3
-	id: cache-gnutls
-	env:
-	cache-name: cache-gnutls
-	with:
-	path: /home/runner/gnutls
-	key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ env.gnutls-version }}
-
-	- if: steps.cache-gnutls.outputs.cache-hit != 'true'
-	run: \|
-	cd $HOME
-	git clone --quiet --depth=1 -b ${{ env.gnutls-version }} https://github.com/gnutls/gnutls.git
-	cd gnutls
-	./bootstrap
-	./configure --prefix=$HOME/nghttpx \
-	PKG_CONFIG_PATH="$HOME/nghttpx/lib/pkgconfig" LDFLAGS="-Wl,-rpath,$HOME/nghttpx/lib -L$HOME/nghttpx/lib" \
-	--with-included-libtasn1 --with-included-unistring \
-	--disable-guile --disable-doc --disable-tests --disable-tools
-	make
-	name: 'build gnutls'
-
-	- run: \|
-	cd $HOME/gnutls
-	make install
-	name: 'install gnutls'
-
-
-	- name: cache wolfssl
-	uses: actions/cache@v3
-	id: cache-wolfssl
-	env:
-	cache-name: cache-wolfssl
-	with:
-	path: /home/runner/wolfssl
-	key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ env.wolfssl-version }}
-
-	- if: steps.cache-wolfssl.outputs.cache-hit != 'true' \|\| ${{ env.wolfssl-version }} == 'master'
-	run: \|
-	cd $HOME
-	rm -rf wolfssl
-	git clone --quiet --depth=1 -b ${{ env.wolfssl-version }} https://github.com/wolfSSL/wolfssl.git
-	cd wolfssl
-	./autogen.sh
-	./configure --enable-all --enable-quic --prefix=$HOME/nghttpx
-	make
-	name: 'build wolfssl'
-
-	- run: \|
-	cd $HOME/wolfssl
-	make install
-	name: 'install wolfssl'
-
-
-	- name: cache nghttp3
-	uses: actions/cache@v3
-	id: cache-nghttp3
-	env:
-	cache-name: cache-nghttp3
-	with:
-	path: /home/runner/nghttp3
-	key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ env.nghttp3-version }}
-
-	- if: steps.cache-nghttp3.outputs.cache-hit != 'true'
-	run: \|
-	cd $HOME
-	git clone --quiet --depth=1 -b ${{ env.nghttp3-version }} https://github.com/ngtcp2/nghttp3
-	cd nghttp3
-	autoreconf -fi
-	./configure --prefix=$HOME/nghttpx PKG_CONFIG_PATH="$HOME/nghttpx/lib/pkgconfig" --enable-lib-only
-	make
-	name: 'build nghttp3'
-
-	- run: \|
-	cd $HOME/nghttp3
-	make install
-	name: 'install nghttp3'
-
-	# depends on all other cached libs built so far
-	- run: \|
-	git clone --quiet --depth=1 -b ${{ env.ngtcp2-version }} https://github.com/ngtcp2/ngtcp2
-	cd ngtcp2
-	autoreconf -fi
-	./configure --prefix=$HOME/nghttpx PKG_CONFIG_PATH="$HOME/nghttpx/lib/pkgconfig" --enable-lib-only --with-openssl --with-gnutls --with-wolfssl
-	make install
-	name: 'install ngtcp2'
-
-	# depends on all other cached libs built so far
-	- run: \|
-	git clone --quiet --depth=1 -b ${{ env.nghttp2-version }} https://github.com/nghttp2/nghttp2
-	cd nghttp2
-	autoreconf -fi
-	./configure --prefix=$HOME/nghttpx PKG_CONFIG_PATH="$HOME/nghttpx/lib/pkgconfig" --enable-http3
-	make install
-	name: 'install nghttp2'
-
-	- name: cache mod_h2
-	uses: actions/cache@v3
-	id: cache-mod_h2
-	env:
-	cache-name: cache-mod_h2
-	with:
-	path: /home/runner/mod_h2
-	key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ env.mod_h2-version }}
-
-	- if: steps.cache-mod_h2.outputs.cache-hit != 'true'
-	run: \|
-	cd $HOME
-	git clone --quiet --depth=1 -b ${{ env.mod_h2-version }} https://github.com/icing/mod_h2
-	cd mod_h2
-	autoreconf -fi
-	./configure
-	make
-	name: 'build mod_h2'
-
-	- run: \|
-	cd $HOME/mod_h2
-	sudo make install
-	name: 'install mod_h2'
-
-	- uses: actions/checkout@v4
-
-	- run: \|
-	sudo python3 -m pip install -r tests/requirements.txt -r tests/http/requirements.txt
-	name: 'install python test prereqs'
-
-	- run: autoreconf -fi
-	name: 'autoreconf'
-
-	- run: ./configure ${{ matrix.build.configure }}
-	name: 'configure'
-
-	- run: make V=1
-	name: 'make'
-
-	- run: make V=1 examples
-	name: 'make examples'
-
-	- run: make V=1 -C tests
-	name: 'make tests'
-
-	- run: make V=1 test-ci
-	name: 'run tests'
-	env:
-	TFLAGS: "${{ matrix.build.tflags }}"
-
-	- run: pytest -v tests
-	name: 'run pytest'
-	env:
-	TFLAGS: "${{ matrix.build.tflags }}"
-	CURL_CI: github
+	- run: \|
+	sudo apt-get update
+	sudo apt-get install libtool autoconf automake pkg-config stunnel4 \
+	libpsl-dev libbrotli-dev libzstd-dev zlib1g-dev libev-dev libc-ares-dev \
+	nettle-dev libp11-kit-dev libtspi-dev libunistring-dev guile-2.2-dev libtasn1-bin \
+	libtasn1-6-dev libidn2-0-dev gawk gperf libtss2-dev dns-root-data bison gtk-doc-tools \
+	texinfo texlive texlive-extra-utils autopoint libev-dev \
+	apache2 apache2-dev libnghttp2-dev
+	name: 'install prereqs and impacket, pytest, crypto, apache2'
+
+	- name: cache quictls
+	uses: actions/cache@v3
+	id: cache-quictls-no-deprecated
+	env:
+	cache-name: cache-quictls-no-deprecated
+	with:
+	path: /home/runner/quictls
+	key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ env.quictls-version }}
+
+	- if: steps.cache-quictls-no-deprecated.outputs.cache-hit != 'true'
+	run: \|
+	cd $HOME
+	git clone --quiet --depth=1 -b openssl-${{ env.quictls-version }} https://github.com/quictls/openssl quictls
+	cd quictls
+	./config no-deprecated --prefix=$HOME/nghttpx --libdir=$HOME/nghttpx/lib
+	make
+	name: 'build quictls'
+
+	- run: \|
+	cd $HOME/quictls
+	make -j1 install_sw
+	name: 'install quictls'
+
+
+	- name: cache gnutls
+	uses: actions/cache@v3
+	id: cache-gnutls
+	env:
+	cache-name: cache-gnutls
+	with:
+	path: /home/runner/gnutls
+	key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ env.gnutls-version }}
+
+	- if: steps.cache-gnutls.outputs.cache-hit != 'true'
+	run: \|
+	cd $HOME
+	git clone --quiet --depth=1 -b ${{ env.gnutls-version }} https://github.com/gnutls/gnutls.git
+	cd gnutls
+	./bootstrap
+	./configure --prefix=$HOME/nghttpx \
+	PKG_CONFIG_PATH="$HOME/nghttpx/lib/pkgconfig" LDFLAGS="-Wl,-rpath,$HOME/nghttpx/lib -L$HOME/nghttpx/lib" \
+	--with-included-libtasn1 --with-included-unistring \
+	--disable-guile --disable-doc --disable-tests --disable-tools
+	make
+	name: 'build gnutls'
+
+	- run: \|
+	cd $HOME/gnutls
+	make install
+	name: 'install gnutls'
+
+
+	- name: cache wolfssl
+	uses: actions/cache@v3
+	id: cache-wolfssl
+	env:
+	cache-name: cache-wolfssl
+	with:
+	path: /home/runner/wolfssl
+	key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ env.wolfssl-version }}
+
+	- if: steps.cache-wolfssl.outputs.cache-hit != 'true' \|\| ${{ env.wolfssl-version }} == 'master'
+	run: \|
+	cd $HOME
+	rm -rf wolfssl
+	git clone --quiet --depth=1 -b ${{ env.wolfssl-version }} https://github.com/wolfSSL/wolfssl.git
+	cd wolfssl
+	./autogen.sh
+	./configure --enable-all --enable-quic --prefix=$HOME/nghttpx
+	make
+	name: 'build wolfssl'
+
+	- run: \|
+	cd $HOME/wolfssl
+	make install
+	name: 'install wolfssl'
+
+
+	- name: cache nghttp3
+	uses: actions/cache@v3
+	id: cache-nghttp3
+	env:
+	cache-name: cache-nghttp3
+	with:
+	path: /home/runner/nghttp3
+	key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ env.nghttp3-version }}
+
+	- if: steps.cache-nghttp3.outputs.cache-hit != 'true'
+	run: \|
+	cd $HOME
+	git clone --quiet --depth=1 -b ${{ env.nghttp3-version }} https://github.com/ngtcp2/nghttp3
+	cd nghttp3
+	autoreconf -fi
+	./configure --prefix=$HOME/nghttpx PKG_CONFIG_PATH="$HOME/nghttpx/lib/pkgconfig" --enable-lib-only
+	make
+	name: 'build nghttp3'
+
+	- run: \|
+	cd $HOME/nghttp3
+	make install
+	name: 'install nghttp3'
+
+	# depends on all other cached libs built so far
+	- run: \|
+	git clone --quiet --depth=1 -b ${{ env.ngtcp2-version }} https://github.com/ngtcp2/ngtcp2
+	cd ngtcp2
+	autoreconf -fi
+	./configure --prefix=$HOME/nghttpx PKG_CONFIG_PATH="$HOME/nghttpx/lib/pkgconfig" --enable-lib-only --with-openssl --with-gnutls --with-wolfssl
+	make install
+	name: 'install ngtcp2'
+
+	# depends on all other cached libs built so far
+	- run: \|
+	git clone --quiet --depth=1 -b ${{ env.nghttp2-version }} https://github.com/nghttp2/nghttp2
+	cd nghttp2
+	autoreconf -fi
+	./configure --prefix=$HOME/nghttpx PKG_CONFIG_PATH="$HOME/nghttpx/lib/pkgconfig" --enable-http3
+	make install
+	name: 'install nghttp2'
+
+	- name: cache mod_h2
+	uses: actions/cache@v3
+	id: cache-mod_h2
+	env:
+	cache-name: cache-mod_h2
+	with:
+	path: /home/runner/mod_h2
+	key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ env.mod_h2-version }}
+
+	- if: steps.cache-mod_h2.outputs.cache-hit != 'true'
+	run: \|
+	cd $HOME
+	git clone --quiet --depth=1 -b ${{ env.mod_h2-version }} https://github.com/icing/mod_h2
+	cd mod_h2
+	autoreconf -fi
+	./configure
+	make
+	name: 'build mod_h2'
+
+	- run: \|
+	cd $HOME/mod_h2
+	sudo make install
+	name: 'install mod_h2'
+
+	- uses: actions/checkout@v4
+
+	- run: \|
+	sudo python3 -m pip install -r tests/requirements.txt -r tests/http/requirements.txt
+	name: 'install python test prereqs'
+
+	- run: autoreconf -fi
+	name: 'autoreconf'
+
+	- run: ./configure ${{ matrix.build.configure }}
+	name: 'configure'
+
+	- run: make V=1
+	name: 'make'
+
+	- run: make V=1 examples
+	name: 'make examples'
+
+	- run: make V=1 -C tests
+	name: 'make tests'
+
+	- run: make V=1 test-ci
+	name: 'run tests'
+	env:
+	TFLAGS: "${{ matrix.build.tflags }}"
+
+	- run: pytest -v tests
+	name: 'run pytest'
+	env:
+	TFLAGS: "${{ matrix.build.tflags }}"
+	CURL_CI: github

.github/workflows/proselint.yml+37 -37

@@ -7,17 +7,17 @@ name: proselint
	on:
	push:
	branches:
-	- master
-	- '*/ci'
+	- master
+	- '*/ci'
	paths:
-	- '.github/workflows/proselint.yml'
-	- '**.md'
+	- '.github/workflows/proselint.yml'
+	- '**.md'
	pull_request:
	branches:
-	- master
+	- master
	paths:
-	- '.github/workflows/proselint.yml'
-	- '**.md'
+	- '.github/workflows/proselint.yml'
+	- '**.md'

	concurrency:
	group: ${{ github.workflow }}-${{ github.event.pull_request.number \|\| github.sha }}
@@ -29,40 +29,40 @@ jobs:
	check:
	runs-on: ubuntu-latest
	steps:
-	- uses: actions/checkout@v4
+	- uses: actions/checkout@v4

-	- name: install prereqs
-	run: sudo apt-get install python3-proselint
+	- name: install prereqs
+	run: sudo apt-get install python3-proselint

-	# config file help: https://github.com/amperser/proselint/
-	- name: create proselint config
-	run: \|
-	cat <<JSON > $HOME/.proselintrc
-	{
-	"checks": {
-	"typography.diacritical_marks": false,
-	"typography.symbols": false,
-	"annotations.misc": false
+	# config file help: https://github.com/amperser/proselint/
+	- name: create proselint config
+	run: \|
+	cat <<JSON > $HOME/.proselintrc
+	{
+	"checks": {
+	"typography.diacritical_marks": false,
+	"typography.symbols": false,
+	"annotations.misc": false
+	}
	}
-	}
-	JSON
+	JSON

-	- name: check prose
-	run: a=`git ls-files '*.md' \| grep -v docs/CHECKSRC.md` && proselint $a README
+	- name: check prose
+	run: a=`git ls-files '*.md' \| grep -v docs/CHECKSRC.md` && proselint $a README

-	# This is for CHECKSRC and files with aggressive exclamation mark needs
-	- name: create second proselint config
-	run: \|
-	cat <<JSON > $HOME/.proselintrc
-	{
-	"checks": {
-	"typography.diacritical_marks": false,
-	"typography.symbols": false,
-	"typography.exclamation": false,
-	"annotations.misc": false
+	# This is for CHECKSRC and files with aggressive exclamation mark needs
+	- name: create second proselint config
+	run: \|
+	cat <<JSON > $HOME/.proselintrc
+	{
+	"checks": {
+	"typography.diacritical_marks": false,
+	"typography.symbols": false,
+	"typography.exclamation": false,
+	"annotations.misc": false
+	}
	}
-	}
-	JSON
+	JSON

-	- name: check special prose
-	run: a=docs/CHECKSRC.md && proselint $a
+	- name: check special prose
+	run: a=docs/CHECKSRC.md && proselint $a

.github/workflows/quiche-linux.yml+169 -169

@@ -7,35 +7,35 @@ name: quiche
	on:
	push:
	branches:
-	- master
-	- '*/ci'
+	- master
+	- '*/ci'
	paths-ignore:
-	- '*/.md'
-	- '**/CMakeLists.txt'
-	- '.azure-pipelines.yml'
-	- '.circleci/**'
-	- '.cirrus.yml'
-	- 'appveyor.yml'
-	- 'CMake/**'
-	- 'packages/**'
-	- 'plan9/**'
-	- 'projects/**'
-	- 'winbuild/**'
+	- '*/.md'
+	- '**/CMakeLists.txt'
+	- '.azure-pipelines.yml'
+	- '.circleci/**'
+	- '.cirrus.yml'
+	- 'appveyor.yml'
+	- 'CMake/**'
+	- 'packages/**'
+	- 'plan9/**'
+	- 'projects/**'
+	- 'winbuild/**'
	pull_request:
	branches:
-	- master
+	- master
	paths-ignore:
-	- '*/.md'
-	- '**/CMakeLists.txt'
-	- '.azure-pipelines.yml'
-	- '.circleci/**'
-	- '.cirrus.yml'
-	- 'appveyor.yml'
-	- 'CMake/**'
-	- 'packages/**'
-	- 'plan9/**'
-	- 'projects/**'
-	- 'winbuild/**'
+	- '*/.md'
+	- '**/CMakeLists.txt'
+	- '.azure-pipelines.yml'
+	- '.circleci/**'
+	- '.cirrus.yml'
+	- 'appveyor.yml'
+	- 'CMake/**'
+	- 'packages/**'
+	- 'plan9/**'
+	- 'projects/**'
+	- 'winbuild/**'

	concurrency:
	# Hardcoded workflow filename as workflow name above is just Linux again
@@ -62,149 +62,149 @@ jobs:
	fail-fast: false
	matrix:
	build:
-	- name: quiche
-	install: >-
-	libpsl-dev libbrotli-dev libzstd-dev zlib1g-dev libev-dev libc-ares-dev
-	install_steps: pytest
-	configure: >-
-	LDFLAGS="-Wl,-rpath,/home/runner/quiche/target/release"
-	--with-openssl=/home/runner/quiche/quiche/deps/boringssl/src
-	--enable-debug
-	--with-quiche=/home/runner/quiche/target/release
-	--with-test-nghttpx="$HOME/nghttpx/bin/nghttpx"
-	--with-ca-fallback
+	- name: quiche
+	install: >-
+	libpsl-dev libbrotli-dev libzstd-dev zlib1g-dev libev-dev libc-ares-dev
+	install_steps: pytest
+	configure: >-
+	LDFLAGS="-Wl,-rpath,/home/runner/quiche/target/release"
+	--with-openssl=/home/runner/quiche/quiche/deps/boringssl/src
+	--enable-debug
+	--with-quiche=/home/runner/quiche/target/release
+	--with-test-nghttpx="$HOME/nghttpx/bin/nghttpx"
+	--with-ca-fallback

	steps:
-	- run: \|
-	sudo apt-get update
-	sudo apt-get install libtool autoconf automake pkg-config stunnel4 ${{ matrix.build.install }}
-	sudo apt-get install apache2 apache2-dev libnghttp2-dev
-	name: 'install prereqs and impacket, pytest, crypto'
-
-	- name: cache nghttpx
-	uses: actions/cache@v3
-	id: cache-nghttpx
-	env:
-	cache-name: cache-nghttpx
-	with:
-	path: /home/runner/nghttpx
-	key: ${{ runner.os }}-build-${{ env.cache-name }}-openssl-${{ env.openssl-version }}-nghttp3-${{ env.nghttp3-version }}-ngtcp2-${{ env.ngtcp2-version }}-nghttp2-${{ env.nghttp2-version }}
-
-	- if: steps.cache-nghttpx.outputs.cache-hit != 'true'
-	run: \|
-	git clone --quiet --depth=1 -b openssl-${{ env.openssl-version }} https://github.com/quictls/openssl
-	cd openssl
-	./config --prefix=$HOME/nghttpx --libdir=$HOME/nghttpx/lib
-	make -j1 install_sw
-	name: 'install quictls'
-
-	- if: steps.cache-nghttpx.outputs.cache-hit != 'true'
-	run: \|
-	git clone --quiet --depth=1 -b ${{ env.nghttp3-version }} https://github.com/ngtcp2/nghttp3
-	cd nghttp3
-	autoreconf -fi
-	./configure --prefix=$HOME/nghttpx PKG_CONFIG_PATH="$HOME/nghttpx/lib/pkgconfig" --enable-lib-only
-	make install
-	name: 'install nghttp3'
-
-	- if: steps.cache-nghttpx.outputs.cache-hit != 'true'
-	run: \|
-	git clone --quiet --depth=1 -b ${{ env.ngtcp2-version }} https://github.com/ngtcp2/ngtcp2
-	cd ngtcp2
-	autoreconf -fi
-	./configure --prefix=$HOME/nghttpx PKG_CONFIG_PATH="$HOME/nghttpx/lib/pkgconfig" --enable-lib-only --with-openssl
-	make install
-	name: 'install ngtcp2'
-
-	- if: steps.cache-nghttpx.outputs.cache-hit != 'true'
-	run: \|
-	git clone --quiet --depth=1 -b ${{ env.nghttp2-version }} https://github.com/nghttp2/nghttp2
-	cd nghttp2
-	autoreconf -fi
-	./configure --prefix=$HOME/nghttpx PKG_CONFIG_PATH="$HOME/nghttpx/lib/pkgconfig" --enable-http3
-	make install
-	name: 'install nghttp2'
-
-	- name: cache quiche
-	uses: actions/cache@v3
-	id: cache-quiche
-	env:
-	cache-name: cache-quiche
-	with:
-	path: /home/runner/quiche
-	key: ${{ runner.os }}-build-${{ env.cache-name }}-quiche-${{ env.quiche-version }}
-
-	- if: steps.cache-quiche.outputs.cache-hit != 'true'
-	run: \|
-	cd $HOME
-	git clone --quiet --depth=1 -b ${{ env.quiche-version }} --recursive https://github.com/cloudflare/quiche.git
-	cd quiche
-	#### Work-around https://github.com/curl/curl/issues/7927 #######
-	#### See https://github.com/alexcrichton/cmake-rs/issues/131 ####
-	sed -i -e 's/cmake = "0.1"/cmake = "=0.1.45"/' quiche/Cargo.toml
-
-	cargo build -v --package quiche --release --features ffi,pkg-config-meta,qlog --verbose
-	mkdir -v quiche/deps/boringssl/src/lib
-	ln -vnf $(find target/release -name libcrypto.a -o -name libssl.a) quiche/deps/boringssl/src/lib/
-
-	# include dir
-	# /home/runner/quiche/quiche/deps/boringssl/src/include
-	# lib dir
-	# /home/runner/quiche/quiche/deps/boringssl/src/lib
-	name: 'build quiche and boringssl'
-
-	- name: cache mod_h2
-	uses: actions/cache@v3
-	id: cache-mod_h2
-	env:
-	cache-name: cache-mod_h2
-	with:
-	path: /home/runner/mod_h2
-	key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ env.mod_h2-version }}
-
-	- if: steps.cache-mod_h2.outputs.cache-hit != 'true'
-	run: \|
-	cd $HOME
-	git clone --quiet --depth=1 -b ${{ env.mod_h2-version }} https://github.com/icing/mod_h2
-	cd mod_h2
-	autoreconf -fi
-	./configure
-	make
-	name: 'build mod_h2'
-
-	- run: \|
-	cd $HOME/mod_h2
-	sudo make install
-	name: 'install mod_h2'
-
-	- uses: actions/checkout@v4
-
-	- run: \|
-	sudo python3 -m pip install -r tests/requirements.txt -r tests/http/requirements.txt
-	name: 'install python test prereqs'
-
-	- run: autoreconf -fi
-	name: 'autoreconf'
-
-	- run: ./configure ${{ matrix.build.configure }}
-	name: 'configure'
-
-	- run: make V=1
-	name: 'make'
-
-	- run: make V=1 examples
-	name: 'make examples'
-
-	- run: make V=1 -C tests
-	name: 'make tests'
-
-	- run: make V=1 test-ci
-	name: 'run tests'
-	env:
-	TFLAGS: "${{ matrix.build.tflags }}"
-
-	- run: pytest -v tests
-	name: 'run pytest'
-	env:
-	TFLAGS: "${{ matrix.build.tflags }}"
-	CURL_CI: github
+	- run: \|
+	sudo apt-get update
+	sudo apt-get install libtool autoconf automake pkg-config stunnel4 ${{ matrix.build.install }}
+	sudo apt-get install apache2 apache2-dev libnghttp2-dev
+	name: 'install prereqs and impacket, pytest, crypto'
+
+	- name: cache nghttpx
+	uses: actions/cache@v3
+	id: cache-nghttpx
+	env:
+	cache-name: cache-nghttpx
+	with:
+	path: /home/runner/nghttpx
+	key: ${{ runner.os }}-build-${{ env.cache-name }}-openssl-${{ env.openssl-version }}-nghttp3-${{ env.nghttp3-version }}-ngtcp2-${{ env.ngtcp2-version }}-nghttp2-${{ env.nghttp2-version }}
+
+	- if: steps.cache-nghttpx.outputs.cache-hit != 'true'
+	run: \|
+	git clone --quiet --depth=1 -b openssl-${{ env.openssl-version }} https://github.com/quictls/openssl
+	cd openssl
+	./config --prefix=$HOME/nghttpx --libdir=$HOME/nghttpx/lib
+	make -j1 install_sw
+	name: 'install quictls'
+
+	- if: steps.cache-nghttpx.outputs.cache-hit != 'true'
+	run: \|
+	git clone --quiet --depth=1 -b ${{ env.nghttp3-version }} https://github.com/ngtcp2/nghttp3
+	cd nghttp3
+	autoreconf -fi
+	./configure --prefix=$HOME/nghttpx PKG_CONFIG_PATH="$HOME/nghttpx/lib/pkgconfig" --enable-lib-only
+	make install
+	name: 'install nghttp3'
+
+	- if: steps.cache-nghttpx.outputs.cache-hit != 'true'
+	run: \|
+	git clone --quiet --depth=1 -b ${{ env.ngtcp2-version }} https://github.com/ngtcp2/ngtcp2
+	cd ngtcp2
+	autoreconf -fi
+	./configure --prefix=$HOME/nghttpx PKG_CONFIG_PATH="$HOME/nghttpx/lib/pkgconfig" --enable-lib-only --with-openssl
+	make install
+	name: 'install ngtcp2'
+
+	- if: steps.cache-nghttpx.outputs.cache-hit != 'true'
+	run: \|
+	git clone --quiet --depth=1 -b ${{ env.nghttp2-version }} https://github.com/nghttp2/nghttp2
+	cd nghttp2
+	autoreconf -fi
+	./configure --prefix=$HOME/nghttpx PKG_CONFIG_PATH="$HOME/nghttpx/lib/pkgconfig" --enable-http3
+	make install
+	name: 'install nghttp2'
+
+	- name: cache quiche
+	uses: actions/cache@v3
+	id: cache-quiche
+	env:
+	cache-name: cache-quiche
+	with:
+	path: /home/runner/quiche
+	key: ${{ runner.os }}-build-${{ env.cache-name }}-quiche-${{ env.quiche-version }}
+
+	- if: steps.cache-quiche.outputs.cache-hit != 'true'
+	run: \|
+	cd $HOME
+	git clone --quiet --depth=1 -b ${{ env.quiche-version }} --recursive https://github.com/cloudflare/quiche.git
+	cd quiche
+	#### Work-around https://github.com/curl/curl/issues/7927 #######
+	#### See https://github.com/alexcrichton/cmake-rs/issues/131 ####
+	sed -i -e 's/cmake = "0.1"/cmake = "=0.1.45"/' quiche/Cargo.toml
+
+	cargo build -v --package quiche --release --features ffi,pkg-config-meta,qlog --verbose
+	mkdir -v quiche/deps/boringssl/src/lib
+	ln -vnf $(find target/release -name libcrypto.a -o -name libssl.a) quiche/deps/boringssl/src/lib/
+
+	# include dir
+	# /home/runner/quiche/quiche/deps/boringssl/src/include
+	# lib dir
+	# /home/runner/quiche/quiche/deps/boringssl/src/lib
+	name: 'build quiche and boringssl'
+
+	- name: cache mod_h2
+	uses: actions/cache@v3
+	id: cache-mod_h2
+	env:
+	cache-name: cache-mod_h2
+	with:
+	path: /home/runner/mod_h2
+	key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ env.mod_h2-version }}
+
+	- if: steps.cache-mod_h2.outputs.cache-hit != 'true'
+	run: \|
+	cd $HOME
+	git clone --quiet --depth=1 -b ${{ env.mod_h2-version }} https://github.com/icing/mod_h2
+	cd mod_h2
+	autoreconf -fi
+	./configure
+	make
+	name: 'build mod_h2'
+
+	- run: \|
+	cd $HOME/mod_h2
+	sudo make install
+	name: 'install mod_h2'
+
+	- uses: actions/checkout@v4
+
+	- run: \|
+	sudo python3 -m pip install -r tests/requirements.txt -r tests/http/requirements.txt
+	name: 'install python test prereqs'
+
+	- run: autoreconf -fi
+	name: 'autoreconf'
+
+	- run: ./configure ${{ matrix.build.configure }}
+	name: 'configure'
+
+	- run: make V=1
+	name: 'make'
+
+	- run: make V=1 examples
+	name: 'make examples'
+
+	- run: make V=1 -C tests
+	name: 'make tests'
+
+	- run: make V=1 test-ci
+	name: 'run tests'
+	env:
+	TFLAGS: "${{ matrix.build.tflags }}"
+
+	- run: pytest -v tests
+	name: 'run pytest'
+	env:
+	TFLAGS: "${{ matrix.build.tflags }}"
+	CURL_CI: github

.github/workflows/reuse.yml+6 -6

@@ -8,11 +8,11 @@ name: REUSE compliance
	on:
	push:
	branches:
-	- master
-	- '*/ci'
+	- master
+	- '*/ci'
	pull_request:
	branches:
-	- master
+	- master

	concurrency:
	group: ${{ github.workflow }}-${{ github.event.pull_request.number \|\| github.sha }}
@@ -24,6 +24,6 @@ jobs:
	check:
	runs-on: ubuntu-latest
	steps:
-	- uses: actions/checkout@v4
-	- name: REUSE Compliance Check
-	uses: fsfe/reuse-action@v2
+	- uses: actions/checkout@v4
+	- name: REUSE Compliance Check
+	uses: fsfe/reuse-action@v2

.github/workflows/spellcheck.yml+39 -39

@@ -6,24 +6,24 @@ name: spell
	on:
	push:
	branches:
-	- master
+	- master
	paths:
-	- '**.md'
-	- '**.3'
-	- '**.1'
-	- '**/spellcheck.yml'
-	- '**/spellcheck.yaml'
-	- '**/wordlist.txt'
+	- '**.md'
+	- '**.3'
+	- '**.1'
+	- '**/spellcheck.yml'
+	- '**/spellcheck.yaml'
+	- '**/wordlist.txt'
	pull_request:
	branches:
-	- master
+	- master
	paths:
-	- '**.md'
-	- '**.3'
-	- '**.1'
-	- '**/spellcheck.yml'
-	- '**/spellcheck.yaml'
-	- '**/wordlist.txt'
+	- '**.md'
+	- '**.3'
+	- '**.1'
+	- '**/spellcheck.yml'
+	- '**/spellcheck.yaml'
+	- '**/wordlist.txt'

	permissions: {}

@@ -31,36 +31,36 @@ jobs:
	check:
	runs-on: ubuntu-latest
	steps:
-	- uses: actions/checkout@v4
+	- uses: actions/checkout@v4

-	- name: install pandoc
-	run: sudo apt-get install pandoc
+	- name: install pandoc
+	run: sudo apt-get install pandoc

-	- name: build curl.1
-	run: \|
-	autoreconf -fi
-	./configure --without-ssl
-	make -C docs
+	- name: build curl.1
+	run: \|
+	autoreconf -fi
+	./configure --without-ssl
+	make -C docs

-	- name: strip "uncheckable" sections from .3 pages
-	run: find docs -name "*.3" -size +40c \| sed 's/\.3//' \| xargs -t -n1 -I OO ./.github/scripts/cleanspell.pl OO.3 OO.33
+	- name: strip "uncheckable" sections from .3 pages
+	run: find docs -name "*.3" -size +40c \| sed 's/\.3//' \| xargs -t -n1 -I OO ./.github/scripts/cleanspell.pl OO.3 OO.33

-	- name: convert .3 man pages to markdown
-	run: find docs -name "*.33" -size +40c \| sed 's/\.33//' \| xargs -t -n1 -I OO pandoc -f man -t markdown OO.33 -o OO.md
+	- name: convert .3 man pages to markdown
+	run: find docs -name "*.33" -size +40c \| sed 's/\.33//' \| xargs -t -n1 -I OO pandoc -f man -t markdown OO.33 -o OO.md

-	- name: convert .1 man pages to markdown
-	run: find docs -name "*.1" -size +40c \| sed 's/\.1//' \| xargs -t -n1 -I OO pandoc OO.1 -o OO.md
+	- name: convert .1 man pages to markdown
+	run: find docs -name "*.1" -size +40c \| sed 's/\.1//' \| xargs -t -n1 -I OO pandoc OO.1 -o OO.md

-	- name: trim the curl.1 markdown file
-	run: \|
-	perl -pi -e 's/^ .*//' docs/curl.md
-	perl -pi -e 's/\-\-[\a-z0-9-]*//ig' docs/curl.md
-	perl -pi -e 's!https://[a-z0-9%/.-]*!!ig' docs/curl.md
+	- name: trim the curl.1 markdown file
+	run: \|
+	perl -pi -e 's/^ .*//' docs/curl.md
+	perl -pi -e 's/\-\-[\a-z0-9-]*//ig' docs/curl.md
+	perl -pi -e 's!https://[a-z0-9%/.-]*!!ig' docs/curl.md

-	- name: setup the custom wordlist
-	run: grep -v '^#' .github/scripts/spellcheck.words > wordlist.txt
+	- name: setup the custom wordlist
+	run: grep -v '^#' .github/scripts/spellcheck.words > wordlist.txt

-	- name: Check Spelling
-	uses: rojopolis/spellcheck-github-actions@v0
-	with:
-	config_path: .github/scripts/spellcheck.yaml
+	- name: Check Spelling
+	uses: rojopolis/spellcheck-github-actions@v0
+	with:
+	config_path: .github/scripts/spellcheck.yaml

.github/workflows/synopsis.yml+5 -5

@@ -7,15 +7,15 @@ name: SYNOPSIS
	on:
	push:
	branches:
-	- master
-	- '*/ci'
+	- master
+	- '*/ci'
	paths:
-	- 'docs/libcurl/curl_*.3'
+	- 'docs/libcurl/curl_*.3'
	pull_request:
	branches:
-	- master
+	- master
	paths:
-	- 'docs/libcurl/curl_*.3'
+	- 'docs/libcurl/curl_*.3'

	jobs:
	verify:

.github/workflows/torture.yml+51 -51

@@ -7,35 +7,35 @@ name: Linux torture
	on:
	push:
	branches:
-	- master
-	- '*/ci'
+	- master
+	- '*/ci'
	paths-ignore:
-	- '*/.md'
-	- '**/CMakeLists.txt'
-	- '.azure-pipelines.yml'
-	- '.circleci/**'
-	- '.cirrus.yml'
-	- 'appveyor.yml'
-	- 'CMake/**'
-	- 'packages/**'
-	- 'plan9/**'
-	- 'projects/**'
-	- 'winbuild/**'
+	- '*/.md'
+	- '**/CMakeLists.txt'
+	- '.azure-pipelines.yml'
+	- '.circleci/**'
+	- '.cirrus.yml'
+	- 'appveyor.yml'
+	- 'CMake/**'
+	- 'packages/**'
+	- 'plan9/**'
+	- 'projects/**'
+	- 'winbuild/**'
	pull_request:
	branches:
-	- master
+	- master
	paths-ignore:
-	- '*/.md'
-	- '**/CMakeLists.txt'
-	- '.azure-pipelines.yml'
-	- '.circleci/**'
-	- '.cirrus.yml'
-	- 'appveyor.yml'
-	- 'CMake/**'
-	- 'packages/**'
-	- 'plan9/**'
-	- 'projects/**'
-	- 'winbuild/**'
+	- '*/.md'
+	- '**/CMakeLists.txt'
+	- '.azure-pipelines.yml'
+	- '.circleci/**'
+	- '.cirrus.yml'
+	- 'appveyor.yml'
+	- 'CMake/**'
+	- 'packages/**'
+	- 'plan9/**'
+	- 'projects/**'
+	- 'winbuild/**'

	concurrency:
	# Hardcoded workflow filename as workflow name above is just Linux again
@@ -56,37 +56,37 @@ jobs:
	fail-fast: false
	matrix:
	build:
-	- name: torture
-	install: libpsl-dev libbrotli-dev libzstd-dev zlib1g-dev libnghttp2-dev libssh2-1-dev libc-ares-dev
-	configure: --with-openssl --enable-debug --enable-ares --enable-websockets
-	tflags: -n -t --shallow=25 !FTP
-	- name: torture-ftp
-	install: libpsl-dev libbrotli-dev libzstd-dev zlib1g-dev libnghttp2-dev libssh2-1-dev libc-ares-dev
-	configure: --with-openssl --enable-debug --enable-ares
-	tflags: -n -t --shallow=20 FTP
+	- name: torture
+	install: libpsl-dev libbrotli-dev libzstd-dev zlib1g-dev libnghttp2-dev libssh2-1-dev libc-ares-dev
+	configure: --with-openssl --enable-debug --enable-ares --enable-websockets
+	tflags: -n -t --shallow=25 !FTP
+	- name: torture-ftp
+	install: libpsl-dev libbrotli-dev libzstd-dev zlib1g-dev libnghttp2-dev libssh2-1-dev libc-ares-dev
+	configure: --with-openssl --enable-debug --enable-ares
+	tflags: -n -t --shallow=20 FTP

	steps:
-	- run: \|
-	sudo apt-get update
-	sudo apt-get install libtool autoconf automake pkg-config stunnel4 ${{ matrix.build.install }}
-	sudo python3 -m pip install impacket
-	name: 'install prereqs and impacket'
+	- run: \|
+	sudo apt-get update
+	sudo apt-get install libtool autoconf automake pkg-config stunnel4 ${{ matrix.build.install }}
+	sudo python3 -m pip install impacket
+	name: 'install prereqs and impacket'

-	- uses: actions/checkout@v4
+	- uses: actions/checkout@v4

-	- run: autoreconf -fi
-	name: 'autoreconf'
+	- run: autoreconf -fi
+	name: 'autoreconf'

-	- run: ./configure --enable-warnings --enable-werror ${{ matrix.build.configure }}
-	name: 'configure'
+	- run: ./configure --enable-warnings --enable-werror ${{ matrix.build.configure }}
+	name: 'configure'

-	- run: make V=1
-	name: 'make'
+	- run: make V=1
+	name: 'make'

-	- run: make V=1 -C tests
-	name: 'make tests'
+	- run: make V=1 -C tests
+	name: 'make tests'

-	- run: make V=1 test-torture
-	name: 'run tests'
-	env:
-	TFLAGS: "${{ matrix.build.tflags }}"
+	- run: make V=1 test-torture
+	name: 'run tests'
+	env:
+	TFLAGS: "${{ matrix.build.tflags }}"

.github/workflows/wolfssl.yml+62 -62

@@ -7,35 +7,35 @@ name: Linux wolfSSL
	on:
	push:
	branches:
-	- master
-	- '*/ci'
+	- master
+	- '*/ci'
	paths-ignore:
-	- '*/.md'
-	- '**/CMakeLists.txt'
-	- '.azure-pipelines.yml'
-	- '.circleci/**'
-	- '.cirrus.yml'
-	- 'appveyor.yml'
-	- 'CMake/**'
-	- 'packages/**'
-	- 'plan9/**'
-	- 'projects/**'
-	- 'winbuild/**'
+	- '*/.md'
+	- '**/CMakeLists.txt'
+	- '.azure-pipelines.yml'
+	- '.circleci/**'
+	- '.cirrus.yml'
+	- 'appveyor.yml'
+	- 'CMake/**'
+	- 'packages/**'
+	- 'plan9/**'
+	- 'projects/**'
+	- 'winbuild/**'
	pull_request:
	branches:
-	- master
+	- master
	paths-ignore:
-	- '*/.md'
-	- '**/CMakeLists.txt'
-	- '.azure-pipelines.yml'
-	- '.circleci/**'
-	- '.cirrus.yml'
-	- 'appveyor.yml'
-	- 'CMake/**'
-	- 'packages/**'
-	- 'plan9/**'
-	- 'projects/**'
-	- 'winbuild/**'
+	- '*/.md'
+	- '**/CMakeLists.txt'
+	- '.azure-pipelines.yml'
+	- '.circleci/**'
+	- '.cirrus.yml'
+	- 'appveyor.yml'
+	- 'CMake/**'
+	- 'packages/**'
+	- 'plan9/**'
+	- 'projects/**'
+	- 'winbuild/**'

	concurrency:
	# Hardcoded workflow filename as workflow name above is just Linux again
@@ -56,50 +56,50 @@ jobs:
	fail-fast: false
	matrix:
	build:
-	- name: wolfssl (configured with --enable-all)
-	install:
-	configure: LDFLAGS="-Wl,-rpath,$HOME/wssl/lib" --with-wolfssl=$HOME/wssl --enable-debug
-	wolfssl-configure: --enable-all
-	- name: wolfssl (configured with --enable-opensslextra)
-	install:
-	configure: LDFLAGS="-Wl,-rpath,$HOME/wssl/lib" --with-wolfssl=$HOME/wssl --enable-debug
-	wolfssl-configure: --enable-opensslextra
+	- name: wolfssl (configured with --enable-all)
+	install:
+	configure: LDFLAGS="-Wl,-rpath,$HOME/wssl/lib" --with-wolfssl=$HOME/wssl --enable-debug
+	wolfssl-configure: --enable-all
+	- name: wolfssl (configured with --enable-opensslextra)
+	install:
+	configure: LDFLAGS="-Wl,-rpath,$HOME/wssl/lib" --with-wolfssl=$HOME/wssl --enable-debug
+	wolfssl-configure: --enable-opensslextra

	steps:
-	- run: \|
-	sudo apt-get update
-	sudo apt-get install libtool autoconf automake pkg-config stunnel4 ${{ matrix.build.install }}
-	sudo python3 -m pip install impacket
-	name: 'install prereqs and impacket'
+	- run: \|
+	sudo apt-get update
+	sudo apt-get install libtool autoconf automake pkg-config stunnel4 ${{ matrix.build.install }}
+	sudo python3 -m pip install impacket
+	name: 'install prereqs and impacket'

-	- run: \|
-	WOLFSSL_VER=5.6.3
-	curl -LOsSf --retry 6 --retry-connrefused --max-time 999 https://github.com/wolfSSL/wolfssl/archive/v$WOLFSSL_VER-stable.tar.gz
-	tar -xzf v$WOLFSSL_VER-stable.tar.gz
-	cd wolfssl-$WOLFSSL_VER-stable
-	./autogen.sh
-	./configure --enable-tls13 ${{ matrix.build.wolfssl-configure }} --enable-harden --prefix=$HOME/wssl
-	make install
-	name: 'install wolfssl'
+	- run: \|
+	WOLFSSL_VER=5.6.3
+	curl -LOsSf --retry 6 --retry-connrefused --max-time 999 https://github.com/wolfSSL/wolfssl/archive/v$WOLFSSL_VER-stable.tar.gz
+	tar -xzf v$WOLFSSL_VER-stable.tar.gz
+	cd wolfssl-$WOLFSSL_VER-stable
+	./autogen.sh
+	./configure --enable-tls13 ${{ matrix.build.wolfssl-configure }} --enable-harden --prefix=$HOME/wssl
+	make install
+	name: 'install wolfssl'

-	- uses: actions/checkout@v4
+	- uses: actions/checkout@v4

-	- run: autoreconf -fi
-	name: 'autoreconf'
+	- run: autoreconf -fi
+	name: 'autoreconf'

-	- run: ./configure --enable-warnings --enable-werror ${{ matrix.build.configure }}
-	name: 'configure'
+	- run: ./configure --enable-warnings --enable-werror ${{ matrix.build.configure }}
+	name: 'configure'

-	- run: make V=1
-	name: 'make'
+	- run: make V=1
+	name: 'make'

-	- run: make V=1 examples
-	name: 'make examples'
+	- run: make V=1 examples
+	name: 'make examples'

-	- run: make V=1 -C tests
-	name: 'make tests'
+	- run: make V=1 -C tests
+	name: 'make tests'

-	- run: make V=1 test-ci
-	name: 'run tests'
-	env:
-	TFLAGS: "${{ matrix.build.tflags }}"
+	- run: make V=1 test-ci
+	name: 'run tests'
+	env:
+	TFLAGS: "${{ matrix.build.tflags }}"