← Commit list

d229055549

Viktor Szakats

2026-06-01

SUCCESS Duration: 284s

Subject

tidy-up: miscellaneous

Binary

No binary (build failed)

Architecture & Compiler Flags

Architecture: x86_64-linux-gnu Compiler: gcc (Ubuntu 11.4.0-1ubuntu1~22.04.3) 11.4.0

—

Build Log

(log yok)

Commit Diff GitHub →

.github/stale.yml+1 -1

@@ -15,7 +15,7 @@ staleLabel: stale
	# Comment to post when marking an issue as stale. Set to `false` to disable
	markComment: >
	This issue has been automatically marked as stale because it has not had
-	recent activity. It will be closed if no further activity occurs. Thank you
+	recent activity. It is closed if no further activity occurs. Thank you
	for your contributions.
	# Comment to post when closing a stale issue. Set to `false` to disable
	closeComment: false

.github/workflows/macos.yml+1 -1

@@ -658,7 +658,7 @@ jobs:
	# Reduce build combinations, by dropping less interesting ones
	- { image: macos-26, compiler: 'gcc-13' }
	- { compiler: 'gcc-14' , build: cmake }
-	# Reduce autotools to just one job that is also build with cmake
+	# Reduce autotools to only one job that is also build with cmake
	- { compiler: 'gcc-13' , build: autotools }
	- { compiler: 'gcc-14' , build: autotools }
	- { compiler: 'gcc-15' , build: autotools }

CMake/FindGSS.cmake+2 -2

@@ -121,7 +121,7 @@ if(NOT _gss_FOUND) # Not found by pkg-config. Let us take more traditional appr
	RESULT_VARIABLE _gss_configure_failed
	OUTPUT_STRIP_TRAILING_WHITESPACE)

-	# Older versions may not have the "--version" parameter. In this case we just do not care.
+	# Older versions may not have the "--version" parameter. In this case we do not care.
	if(_gss_configure_failed)
	set(_gss_version 0)
	else()
@@ -134,7 +134,7 @@ if(NOT _gss_FOUND) # Not found by pkg-config. Let us take more traditional appr
	RESULT_VARIABLE _gss_configure_failed
	OUTPUT_STRIP_TRAILING_WHITESPACE)

-	# Older versions may not have the "--vendor" parameter. In this case we just do not care.
+	# Older versions may not have the "--vendor" parameter. In this case we do not care.
	if(NOT _gss_configure_failed AND NOT _gss_vendor MATCHES "Heimdal\|heimdal")
	set(_gss_flavour "MIT") # assume a default, should not really matter
	endif()

CMake/PickyWarnings.cmake+2 -2

@@ -407,7 +407,7 @@ if(PICKY_COMPILER)
	list(APPEND _picky "-wd4746")
	list(APPEND _picky "-wd4820") # 'A': 'N' bytes padding added after data member 'B'
	if(MSVC_VERSION GREATER_EQUAL 1900)
-	list(APPEND _picky "-wd5045") # Compiler will insert Spectre mitigation for memory load if /Qspectre switch specified
+	list(APPEND _picky "-wd5045") # Compiler inserts Spectre mitigation for memory load if /Qspectre switch specified
	endif()
	endif()
	endif()
@@ -437,7 +437,7 @@ if(CMAKE_C_STANDARD STREQUAL 90)
	endif()
	if((CMAKE_C_COMPILER_ID STREQUAL "Clang" AND CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 3.9) OR
	(CMAKE_C_COMPILER_ID STREQUAL "AppleClang" AND CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 8.1))
-	list(APPEND _picky "-Wno-comma") # Just silly
+	list(APPEND _picky "-Wno-comma") # Silly
	endif()
	endif()

CMakeLists.txt+1 -1

@@ -2180,7 +2180,7 @@ if(NOT CURL_DISABLE_INSTALL)
	set(_explicit_libs "")
	get_target_property(_imported "${_lib}" IMPORTED)
	if(NOT _imported)
-	# Reading the LOCATION property on non-imported target does error out.
+	# Reading the LOCATION property on non-imported target errors out.
	# Assume the user does not need this information in the .pc file.
	continue()
	endif()

REUSE.toml+2 -2

@@ -2,8 +2,8 @@
	# SPDX-FileCopyrightText: Daniel Stenberg, <[email protected]>, et al.

	# This file describes the licensing and copyright situation for files that
-	# cannot be annotated directly, for example because of being
-	# uncommentable. Unless this is the case, a file should be annotated directly.
+	# cannot be annotated directly, for example because of being uncommentable.
+	# Unless this is the case, a file should be annotated directly.
	#
	# This follows the REUSE specification: https://reuse.software/spec-3.2/#reusetoml

acinclude.m4+1 -1

@@ -1040,7 +1040,7 @@ AC_DEFUN([CURL_VERIFY_RUNTIMELIBS], [
	dnl this test is of course not sensible if we are cross-compiling!
	if test "$cross_compiling" != "yes"; then

-	dnl just run a program to verify that the libs checked for previous to this
+	dnl run a program to verify that the libs checked for previous to this
	dnl point also is available runtime!
	AC_MSG_CHECKING([runtime libs availability])
	CURL_RUN_IFELSE([

configure.ac+6 -6

@@ -227,7 +227,7 @@ exec $CC "$@"
	EOF

	dnl **********************************************************************
-	dnl See which TLS backend(s) that are requested. Just do all the
+	dnl See which TLS backend(s) that are requested. Do all the
	dnl TLS AC_ARG_WITH() invokes here and do the checks later
	dnl **********************************************************************
	OPT_SCHANNEL=no
@@ -1610,7 +1610,7 @@ if test "x$OPT_BROTLI" != "xno"; then
	DIR_BROTLI=`echo $LD_BROTLI \| $SED -e 's/^-L//'`
	;;
	off)
-	dnl no --with-brotli option given, just check default places
+	dnl no --with-brotli option given, check default places
	;;
	*)
	dnl use the given --with-brotli spot
@@ -1700,7 +1700,7 @@ if test "x$OPT_ZSTD" != "xno"; then

	;;
	off)
-	dnl no --with-zstd option given, just check default places
+	dnl no --with-zstd option given, check default places
	;;
	*)
	dnl use the given --with-zstd spot
@@ -1846,7 +1846,7 @@ int main(int argc, char **argv)
	{
	#ifdef _WIN32
	/* on Windows, writing to the argv does not hide the argument in
-	process lists so it can just be skipped */
+	process lists so it can be skipped */
	(void)argc;
	(void)argv;
	return 1;
@@ -2437,7 +2437,7 @@ if test "x$OPT_LIBSSH2" != "xno"; then

	;;
	off)
-	dnl no --with-libssh2 option given, just check default places
+	dnl no --with-libssh2 option given, check default places
	;;
	*)
	dnl use the given --with-libssh2 spot
@@ -2514,7 +2514,7 @@ elif test "x$OPT_LIBSSH" != "xno"; then

	;;
	off)
-	dnl no --with-libssh option given, just check default places
+	dnl no --with-libssh option given, check default places
	;;
	*)
	dnl use the given --with-libssh spot

lib/cf-h3-proxy.c+1 -1

@@ -1404,7 +1404,7 @@ static void cb_ngtcp2_rand(uint8_t *dest, size_t destlen,
	result = Curl_rand(NULL, dest, destlen);
	if(result) {
	/* cb_rand is only used for non-cryptographic context. If Curl_rand
-	failed, just fill 0 and call it random. */
+	failed, fill 0 and call it random. */
	memset(dest, 0, destlen);
	}
	}

lib/config-os400.h+1 -1

@@ -238,7 +238,7 @@
	/* Size of time_t in number of bytes */
	#define SIZEOF_TIME_T 4

-	/* Define to 1 if all of the C89 standard headers exist (not just the ones
+	/* Define to 1 if all of the C89 standard headers exist (not only the ones
	required in a freestanding environment). This macro is provided for
	backward compatibility; new code need not use it. */
	#define STDC_HEADERS 1

lib/request.c+1 -1

@@ -392,7 +392,7 @@ CURLcode Curl_req_send(struct Curl_easy data, struct dynbuf req,
	blen = curlx_dyn_len(req);
	/* if the sendbuf is empty and the request without body and
	* the length to send fits info a sendbuf chunk, we send it directly.
-	* If `blen` is larger then `chunk_size`, we can not. Because we
+	* If `blen` is larger than `chunk_size`, we can not. Because we
	* might have to retry a blocked send later from sendbuf and that
	* would result in retry sends with a shrunken length. That is trouble. */
	if(Curl_bufq_is_empty(&data->req.sendbuf) &&

lib/sendf.h+1 -1

@@ -377,7 +377,7 @@ curl_off_t Curl_creader_client_length(struct Curl_easy *data);
	* values will be ignored.
	* @return CURLE_OK if offset could be set
	* CURLE_READ_ERROR if not supported by reader or seek/read failed
-	* of offset larger then total length
+	* of offset larger than total length
	* CURLE_PARTIAL_FILE if offset led to 0 total length
	*/
	CURLcode Curl_creader_resume_from(struct Curl_easy *data, curl_off_t offset);

lib/setopt.c+1 -1

@@ -2774,7 +2774,7 @@ static CURLcode setopt_offt(struct Curl_easy *data, CURLoption option,
	break;
	case CURLOPT_MAX_SEND_SPEED_LARGE:
	/*
-	* When transfer uploads are faster then CURLOPT_MAX_SEND_SPEED_LARGE
+	* When transfer uploads are faster than CURLOPT_MAX_SEND_SPEED_LARGE
	* bytes per second the transfer is throttled..
	*/
	if(offt < 0)

lib/url.c+1 -1

@@ -980,7 +980,7 @@ static bool url_match_destination(struct connectdata *conn,
	return FALSE;
	}
	}
-	/* Scheme mismatch is acceptable, just compare hostname/port */
+	/* Scheme mismatch is acceptable, compare hostname/port */
	return Curl_peer_same_destination(m->needle->origin, conn->origin);
	}

lib/urlapi.c+1 -1

@@ -480,7 +480,7 @@ static CURLUcode hostname_check(struct Curl_URL u, char hostname,
	/* more than one trailing dot is not allowed */
	return CURLUE_BAD_HOSTNAME;
	else if((hlen == 1) && (hostname[0] == '.'))
-	/* just a single dot is not allowed */
+	/* a single dot alone is not allowed */
	return CURLUE_BAD_HOSTNAME;
	}
	return CURLUE_OK;

lib/vquic/curl_ngtcp2.c+1 -1

@@ -1697,7 +1697,7 @@ static CURLcode h3_stream_open(struct Curl_cfilter *cf,
	stream->upload_left = -1; /* unknown */
	break;
	default:
-	/* there is not request body */
+	/* there is no request body */
	stream->upload_left = 0; /* no request body */
	break;
	}

m4/curl-compilers.m4+2 -2

@@ -174,7 +174,7 @@ dnl -------------------------------------------------
	dnl Verify if compiler being used is GNU C
	dnl
	dnl $compiler_num is set to MAJOR * 100 + MINOR for gcc less than version
-	dnl 7 and just $MAJOR * 100 for gcc version 7 and later.
+	dnl 7 and $MAJOR * 100 for gcc version 7 and later.
	dnl
	dnl Examples:
	dnl Version 1.2.3 => 102
@@ -966,7 +966,7 @@ AC_DEFUN([CURL_SET_COMPILER_WARNING_OPTS], [
	tmp_CFLAGS="$tmp_CFLAGS -Wno-c99-extensions" # Avoid: warning: '_Bool' is a C99 extension
	fi
	if test "$compiler_num" -ge "309"; then
-	tmp_CFLAGS="$tmp_CFLAGS -Wno-comma" # Just silly
+	tmp_CFLAGS="$tmp_CFLAGS -Wno-comma" # Silly
	fi
	;;
	esac

m4/curl-gnutls.m4+1 -1

@@ -72,7 +72,7 @@ if test "x$OPT_GNUTLS" != "xno"; then
	addlib=-lgnutls
	addld=-L$OPT_GNUTLS/lib$libsuff
	addcflags=-I$OPT_GNUTLS/include
-	dnl we just do not know
+	dnl we do not know
	version=""
	gtlslib=$OPT_GNUTLS/lib$libsuff
	fi

projects/OS400/.checksrc+1 -1

@@ -2,7 +2,7 @@
	#
	# SPDX-License-Identifier: curl

-	# Possibly not what we want, but cannot test, just silence the warnings
+	# Possibly not what we want, but cannot test, thus silence the warnings
	allowfunc calloc
	allowfunc free
	allowfunc malloc

projects/vms/build_gnv_curl_pcsi_desc.com+1 -1

@@ -425,7 +425,7 @@ $ destname = "[gnv.beta" + destname - "[gnv.usr"
	$ endif
	$ endif
	$!
-	$! It should be just a directory then.
+	$! It should be a directory then.
	$!-------------------------------------
	$ filedir = f$edit(f$parse(filename,,,"DIRECTORY"), "lowercase")
	$! If this is not a directory then start processing files.

projects/vms/build_vms.com+1 -1

@@ -723,7 +723,7 @@ $ endif
	$ 'vo_c' " SSLLIB = ''ssllib'"
	$!
	$! TODO: Why are we translating the logical name?
-	$! The logical aname used to find the shared image should just be used
+	$! The logical aname used to find the shared image should be used
	$! as translating it could result in the wrong location at run time.
	$ if (openssl .eq. 1)
	$ then

projects/vms/config_h.com+1 -1

@@ -10,7 +10,7 @@ $! The CONFIGURE shell script will be examined for hints and a few symbols
	$! but most of the tests will not produce valid results on OpenVMS. Some
	$! will produce false positives and some will produce false negatives.
	$!
-	$! It is easier to just read the config.h_in file and make up tests based
+	$! It is easier to read the config.h_in file and make up tests based
	$! on what is in it!
	$!
	$! This file will create an empty config_vms.h file if one does not exist.

projects/vms/curl_gnv_build_steps.txt+1 -1

@@ -268,7 +268,7 @@ branding the PCSI kit based on who is making the kit.
	This compares the VMS specific source with the backup
	staging directory for it and updates with any changes.

-	Leave off "UPDATE" to just check without doing any changes.
+	Leave off "UPDATE" to check without doing any changes.

	If you are not using NFS mounted disks and do not want to have a
	separate directory for staging the sources for backup make sure

projects/vms/curl_release_note_start.txt+1 -1

@@ -36,7 +36,7 @@ the GNV$LIBCURL shared image and create logical names GNV$LIBCURL to reference
	it. It will create the GNV$CURL_INCLUDE logical name for build procedures
	to access the header files.

-	Normally to use curl from DCL, just create a foreign command as:
+	Normally to use curl from DCL, create a foreign command as:
	curl :== $gnv$gnu:[usr.bin]gnv$curl.exe

	If you need to work around having the older HP SSL kit installed, then

projects/vms/make_gnv_curl_install.sh+1 -1

@@ -37,7 +37,7 @@ export GNV_CC_MAIN_POSIX_EXIT=1
	make
	cd ../..
	# adjust the libcurl.pc file, GNV currently ignores the Lib: line.
-	# but is noisy about it, so we just remove it.
+	# but is noisy about it, so we remove it.
	sed -e 's/^Libs:/#Libs:/g' libcurl.pc > libcurl.pc_new
	rm libcurl.pc
	mv libcurl.pc_new libcurl.pc

projects/vms/make_pcsi_curl_kit_name.com+1 -1

@@ -67,7 +67,7 @@ $ write sys$output "*****"
	$!
	$!
	$! Base is one of 'VMS', 'AXPVMS', 'I64VMS', 'VAXVMS' and indicates what
-	$! binaries are in the kit. A kit with just 'VMS' can be installed on all
+	$! binaries are in the kit. A kit with only 'VMS' can be installed on all
	$! architectures.
	$!
	$ base = "VMS"

projects/vms/stage_curl_install.com+1 -1

@@ -96,7 +96,7 @@ $ this_dir = f$element(i, ",", dest_dirs)
	$ i = i + 1
	$ if this_dir .eqs. "" then goto curl_dir_loop
	$ if this_dir .eqs. "," then goto curl_dir_loop_end
-	$! Just create the directories, do not delete them.
+	$! Create the directories, do not delete them.
	$! --------------------------------------------------
	$ if remove_files .eq. 0
	$ then

scripts/cd2nroff+1 -1

@@ -426,7 +426,7 @@ sub single {
	print STDERR "$f:$line:1:ERROR: un-escaped < or > used\n";
	$errors++;
	}
-	# convert backslash-'<' or '> to just the second character
+	# convert backslash-'<' or '> to the second character
	$d =~ s/\\([<>])/$1/g;

	# mentions of curl symbols with man pages use italics by default

scripts/checksrc.pl+1 -1

@@ -879,7 +879,7 @@ sub scanfile {
	}
	}

-	# check for "return" with parentheses around just a value/name
+	# check for "return" with parentheses around a value/name
	if($l =~ /^(.\W)return $\w$;/) {
	checkwarn("RETURNPAREN", $line, length($1)+7, $file, $l,
	"return with paren");

scripts/managen+2 -2

@@ -494,7 +494,7 @@ sub render {
	}
	}

-	# convert backslash-'<' or '> to just the second character
+	# convert backslash-'<' or '> to the second character
	$d =~ s/\\([><])/$1/g;
	# convert single backslash to double-backslash
	$d =~ s/\\/\\\\/g if($manpage);
@@ -916,7 +916,7 @@ sub single {
	push @ex, "[0q]Example$s:\n";
	#
	# long ASCII examples are wrapped. Preferably at the last space
-	# before the margin. Or at a colon. Otherwise it just cuts at the
+	# before the margin. Or at a colon. Otherwise it cuts at the
	# exact boundary.
	#
	foreach my $e (@examples) {

scripts/mdlinkcheck+1 -1

@@ -108,7 +108,7 @@ sub storelink {
	#print "-- whitelisted: $link\n";
	$whitelist{$link}++;
	}
-	# example.com is just example
+	# example.com is used as example
	elsif($link =~ /^https:\/\/(.*)example.(com\|org\|net)/) {
	#print "-- example: $link\n";
	}

scripts/mk-ca-bundle.pl+2 -2

@@ -421,7 +421,7 @@ print CRT <<EOT;
	## It contains the certificates in ${format}PEM format and therefore
	## can be directly used with curl / libcurl / php_curl, or with
	## an Apache+mod_ssl webserver for SSL client authentication.
-	## Just configure this file as the SSLCACertificateFile.
+	## Configure this file as the SSLCACertificateFile.
	##
	## Conversion done with mk-ca-bundle.pl version $version.
	## SHA256: $newhash
@@ -493,7 +493,7 @@ while(<TXT>) {
	#
	# The latter is for certificates that have already been removed and are not
	# included. Not all explicitly distrusted certificates are ignored at this
-	# point, just those without an actual certificate.
+	# point, only those without an actual certificate.
	elsif(!$main_block && !$trust_block) {
	next;
	}

scripts/nroff2cd+3 -3

@@ -30,7 +30,7 @@ This script converts an nroff file to curldown
	Example: cd2nroff [options] <file.md> > <file.3>

	Note: when converting .nf sections, this tool does not know if the
-	section is code or just regular quotes. It then assumes and uses ~~~c
+	section is code or regular quotes. It then assumes and uses ~~~c
	for code.

	=end comment
@@ -116,7 +116,7 @@ HEAD
	# if there are enclosing quotes, remove them first
	$word =~ s/[\"\'](.*)[\"\']\z/$1/;
	if($word eq "SEE ALSO") {
-	# we just slurp up this section
+	# we slurp up this section
	next;
	}
	push @desc, "\n# $word\n\n";
@@ -131,7 +131,7 @@ HEAD
	push @desc, "\n## $word\n\n";
	}
	elsif($d =~ /^\.IP/) {
-	# .IP with no text we just skip
+	# .IP with no text we skip
	}
	elsif($d =~ /^\.BR (.*)/) {
	# only used for SEE ALSO

scripts/wcurl+2 -2

@@ -67,7 +67,7 @@ Options:
	--no-decode-filename: Do not percent-decode the output filename, even if the percent-encoding in
	the URL was done by wcurl, e.g.: The URL contained whitespace.

-	--dry-run: Do not actually execute curl, just print what would be invoked.
+	--dry-run: Do not actually execute curl, only print what would be invoked.

	-V, --version: Print version information.

@@ -197,7 +197,7 @@ get_url_filename()
	# sed to also replace ':' with the percent_encoded %3A
	/) percent_decode "$(printf %s "${hostname_and_path}" \| sed -e 's,^.*/,,' -e 's,:,%3A,g')" ;;
	esac
-	# No slash means there was just a hostname and no path; return empty string.
+	# No slash means there was only a hostname and no path; return empty string.
	}

	# Execute curl with the list of URLs provided by the user.

src/tool_getparam.c+7 -7

@@ -539,11 +539,11 @@ struct sizeunit {
	static const struct sizeunit *getunit(char unit)
	{
	static const struct sizeunit list[] = {
-	{'p', (curl_off_t)1125899906842624, 16 }, /* Peta */
-	{'t', (curl_off_t)1099511627776, 13 }, /* Tera */
-	{'g', 1073741824, 10 }, /* Giga */
-	{'m', 1048576, 7 }, /* Mega */
-	{'k', 1024, 4 }, /* Kilo */
+	{ 'p', (curl_off_t)1125899906842624, 16 }, /* Peta */
+	{ 't', (curl_off_t)1099511627776, 13 }, /* Tera */
+	{ 'g', 1073741824, 10 }, /* Giga */
+	{ 'm', 1048576, 7 }, /* Mega */
+	{ 'k', 1024, 4 }, /* Kilo */
	};

	size_t i;
@@ -1627,12 +1627,12 @@ static ParameterError parse_time_cond(struct OperationConfig *config,
	config->timecond = CURL_TIMECOND_IFMODSINCE;
	break;
	case '-':
-	/* If-Unmodified-Since: (section 14.24 in RFC2068) */
+	/* If-Unmodified-Since: (section 14.24 in RFC2068) */
	config->timecond = CURL_TIMECOND_IFUNMODSINCE;
	nextarg++;
	break;
	case '=':
-	/* Last-Modified: (section 14.29 in RFC2068) */
+	/* Last-Modified: (section 14.29 in RFC2068) */
	config->timecond = CURL_TIMECOND_LASTMOD;
	nextarg++;
	break;

src/tool_operate.c+1 -0

@@ -722,6 +722,7 @@ static CURLcode post_close_output(struct per_transfer *per,
	}
	return result;
	}
+
	/*
	* Call this after a transfer has completed.
	*/

tests/certs/Makefile.am+1 -1

@@ -35,7 +35,7 @@ all-am: test-ca.cacert

	# Rebuild the certificates

-	# Generate all certs in a single shot, but declare just a single target file
+	# Generate all certs in a single shot, but declare only a single target file
	# to support GNU Make <4.3 without the "grouped explicit targets" feature.
	test-ca.cacert: $(CERTCONFIG_CA) $(CERTCONFIGS) genserv.pl
	@PERL@ $(srcdir)/genserv.pl test $(CERTCONFIGS)

tests/data/DISABLED+2 -2

@@ -23,7 +23,7 @@
	###########################################################################
	#
	# This file can be used to specify test cases that should not run when all
-	# test cases are run by runtests.pl. Just add the plain test case numbers, one
+	# test cases are run by runtests.pl. Add the plain test case numbers, one
	# per line.
	# Lines starting with '#' letters are treated as comments.
	#
@@ -43,7 +43,7 @@
	1184
	1209
	1211
-	# fnmatch differences are just too common to make testing them sensible
+	# fnmatch differences are too common to make testing them sensible
	1307
	1316
	1512

tests/data/test1075+1 -1

@@ -13,7 +13,7 @@ HTTP Basic auth
	<reply>
	# The test server provides no way to respond differently to a subsequent
	# Basic authenticated request (we really want to respond with 200 for
-	# the second), so just respond with 401 for both and let curl deal with it.
+	# the second), so respond with 401 for both and let curl deal with it.
	<data crlf="headers">
	HTTP/1.1 401 Authorization Required
	Server: testcurl

tests/data/test1144+1 -1

@@ -11,7 +11,7 @@ HTTP/0.9
	# Server-side
	<reply>
	<data>
-	No headers at all, just data swsclose
+	No headers at all, only data swsclose

	Let's get

tests/data/test1152+1 -1

@@ -9,7 +9,7 @@ FAILURE
	# Server-side
	<reply>
	<servercmd>
-	REPLY PWD 257 "just one
+	REPLY PWD 257 "Only one
	</servercmd>
	</reply>

tests/data/test1400+1 -1

@@ -51,7 +51,7 @@ Accept: /
	<stripfile>
	# CURLOPT_SSL_VERIFYPEER, SSH_KNOWNHOSTS and HTTP_VERSION vary with
	# CURLOPT_INTERLEAVEDATA requires RTSP protocol
-	# configurations - just ignore them
+	# configurations - ignore them
	$_ = '' if /CURLOPT_SSL_VERIFYPEER/
	$_ = '' if /CURLOPT_SSH_KNOWNHOSTS/
	$_ = '' if /CURLOPT_HTTP_VERSION/

tests/data/test1401+1 -1

@@ -62,7 +62,7 @@ X-Men: cyclops, iceman
	</protocol>
	<stripfile>
	# CURLOPT_SSL_VERIFYPEER, SSH_KNOWNHOSTS and HTTP_VERSION vary with
-	# configurations - just ignore them
+	# configurations - ignore them
	$_ = '' if /CURLOPT_SSL_VERIFYPEER/
	$_ = '' if /CURLOPT_SSH_KNOWNHOSTS/
	$_ = '' if /CURLOPT_HTTP_VERSION/

tests/data/test1402+1 -1

@@ -54,7 +54,7 @@ foo=bar%AMPbaz=quux
	</protocol>
	<stripfile>
	# CURLOPT_SSL_VERIFYPEER, SSH_KNOWNHOSTS and HTTP_VERSION vary with
-	# configurations - just ignore them
+	# configurations - ignore them
	$_ = '' if /CURLOPT_SSL_VERIFYPEER/
	$_ = '' if /CURLOPT_SSH_KNOWNHOSTS/
	$_ = '' if /CURLOPT_HTTP_VERSION/

tests/data/test1403+1 -1

@@ -51,7 +51,7 @@ Accept: /
	</protocol>
	<stripfile>
	# CURLOPT_SSL_VERIFYPEER, SSH_KNOWNHOSTS and HTTP_VERSION vary with
-	# configurations - just ignore them
+	# configurations - ignore them
	$_ = '' if /CURLOPT_SSL_VERIFYPEER/
	$_ = '' if /CURLOPT_SSH_KNOWNHOSTS/
	$_ = '' if /CURLOPT_HTTP_VERSION/

tests/data/test1404+1 -1

@@ -96,7 +96,7 @@ dummy data
	</protocol>
	<stripfile>
	# CURLOPT_SSL_VERIFYPEER, SSH_KNOWNHOSTS and HTTP_VERSION vary with
-	# configurations - just ignore them
+	# configurations - ignore them
	$_ = '' if /CURLOPT_SSL_VERIFYPEER/
	$_ = '' if /CURLOPT_SSH_KNOWNHOSTS/
	$_ = '' if /CURLOPT_HTTP_VERSION/

tests/data/test1405+2 -2

@@ -65,11 +65,11 @@ QUIT
	<stripfile>
	# CURLOPT_USERAGENT and CURLOPT_MAXREDIRS requires HTTP protocol
	# CURLOPT_INTERLEAVEDATA requires RTSP (HTTP) protocol
-	# support, IOW depends on configuration - just ignore these.
+	# support, IOW depends on configuration - ignore these.
	$_ = '' if /CURLOPT_USERAGENT/
	$_ = '' if /CURLOPT_MAXREDIRS/
	# CURLOPT_SSL_VERIFYPEER, SSH_KNOWNHOSTS and HTTP_VERSION vary with
-	# configurations - just ignore them
+	# configurations - ignore them
	$_ = '' if /CURLOPT_SSL_VERIFYPEER/
	$_ = '' if /CURLOPT_SSH_KNOWNHOSTS/
	$_ = '' if /CURLOPT_HTTP_VERSION/

tests/data/test1406+1 -1

@@ -61,7 +61,7 @@ body
	.
	</upload>
	<stripfile>
-	# These options vary with configurations - just ignore them
+	# These options vary with configurations - ignore them
	# CURLOPT_INTERLEAVEDATA requires RTSP (HTTP) protocol
	$_ = '' if /CURLOPT_MAXREDIRS/
	$_ = '' if /CURLOPT_SSL_VERIFYPEER/

tests/data/test1407+1 -1

@@ -48,7 +48,7 @@ LIST %TESTNUMBER
	QUIT
	</protocol>
	<stripfile>
-	# These options vary with configurations - just ignore them
+	# These options vary with configurations - ignore them
	# CURLOPT_USERAGENT and CURLOPT_MAXREDIRS requires HTTP protocol
	# CURLOPT_INTERLEAVEDATA requires RTSP (HTTP) protocol
	$_ = '' if /CURLOPT_USERAGENT/

tests/data/test1420+1 -1

@@ -54,7 +54,7 @@ A004 FETCH 1 BODY[]
	A005 LOGOUT
	</protocol>
	<stripfile>
-	# These options vary with configurations - just ignore them
+	# These options vary with configurations - ignore them
	# CURLOPT_INTERLEAVEDATA requires RTSP (HTTP) protocol
	$_ = '' if /CURLOPT_MAXREDIRS/
	$_ = '' if /CURLOPT_SSL_VERIFYPEER/

tests/data/test1465+1 -1

@@ -58,7 +58,7 @@ Content-Type: application/x-www-form-urlencoded
	</protocol>
	<stripfile>
	# CURLOPT_SSL_VERIFYPEER, SSH_KNOWNHOSTS and HTTP_VERSION vary with
-	# configurations - just ignore them
+	# configurations - ignore them
	$_ = '' if /CURLOPT_SSL_VERIFYPEER/
	$_ = '' if /CURLOPT_SSH_KNOWNHOSTS/
	$_ = '' if /CURLOPT_HTTP_VERSION/

tests/data/test1481+1 -1

@@ -54,7 +54,7 @@ Proxy-Connection: Keep-Alive
	<stripfile>
	# CURLOPT_SSL_VERIFYPEER, SSH_KNOWNHOSTS and HTTP_VERSION vary with
	# CURLOPT_INTERLEAVEDATA requires RTSP protocol
-	# configurations - just ignore them
+	# configurations - ignore them
	$_ = '' if /CURLOPT_SSL_VERIFYPEER/
	$_ = '' if /CURLOPT_SSH_KNOWNHOSTS/
	$_ = '' if /CURLOPT_HTTP_VERSION/

tests/data/test157+1 -1

@@ -16,7 +16,7 @@ Server: Apache/1.3.27 (Darwin) PHP/4.1.2
	Content-Type: text/html; charset=iso-8859-1
	Connection: close

-	GET received and served just fine. Thank you very much
+	GET received and served fine. Thank you very much
	</data>
	</reply>

tests/data/test2027+1 -1

@@ -16,7 +16,7 @@ Explanation for the duplicate 400 requests:

	libcurl does not detect that a given Digest password is wrong already on the
	first 401 response (as the data400 gives). libcurl will instead consider the
-	new response just as a duplicate and it sends another and detects the auth
+	new response as a duplicate and it sends another and detects the auth
	problem on the second 401 response!

	-->

tests/data/test2030+1 -1

@@ -21,7 +21,7 @@ Explanation for the duplicate 400 requests:

	libcurl does not detect that a given Digest password is wrong already on the
	first 401 response (as the data400 gives). libcurl will instead consider the
-	new response just as a duplicate and it sends another and detects the auth
+	new response as a duplicate and it sends another and detects the auth
	problem on the second 401 response!

	-->

tests/data/test218+2 -2

@@ -31,7 +31,7 @@ HTTP PUT from a file but enforce chunked transfer-encoding
	-T %LOGDIR/file%TESTNUMBER -H "Transfer-Encoding: chunked" http://%HOSTIP:%HTTPPORT/%TESTNUMBER
	</command>
	<file name="%LOGDIR/file%TESTNUMBER">
-	just some tiny teeny contents
+	some tiny teeny test contents
	</file>
	</client>

@@ -45,7 +45,7 @@ Accept: /%CR
	Transfer-Encoding: chunked%CR
	%CR
	1e%CR
-	just some tiny teeny contents
+	some tiny teeny test contents
	%CR
	0%CR
	%CR

tests/data/test2304+1 -1

@@ -62,7 +62,7 @@ Connection: Upgrade
	</protocol>

	# This test used to check that "connection closed" was output, but
-	# that is flaky since the outgoing PING just before might fail already
+	# that is flaky since the outgoing PING before might fail already
	# and then the test exists before the output gets to be written
	</verify>
	</testcase>

tests/data/test306+1 -1

@@ -10,7 +10,7 @@ HTTP GET
	# Server-side
	<reply>
	<data>
-	No headers at all, just data swsclose
+	No headers at all, data swsclose

	Let's get

tests/data/test341+1 -1

@@ -35,7 +35,7 @@ chunky-trailer: header data
	http
	</server>
	<name>
-	A non existing file with --etag-compare is just a blank
+	A non existing file with --etag-compare is a blank
	</name>
	<command>
	http://%HOSTIP:%HTTPPORT/%TESTNUMBER --etag-compare %LOGDIR/etag%TESTNUMBER

tests/data/test583+1 -1

@@ -25,7 +25,7 @@ lib%TESTNUMBER
	SFTP with multi interface, remove handle early
	</name>

-	# The command here uses 'localhost' just to make sure that curl_multi_perform
+	# The command here uses 'localhost' to make sure that curl_multi_perform
	# does not reach too far in the first invoke. When using c-ares at least, the
	# name resolve causes it to return rather quickly and thus we could trigger
	# the problem we are looking to verify.

tests/data/test750+1 -1

@@ -32,7 +32,7 @@ http
	proxy
	</features>
	<name>
-	HTTP CONNECT with proxy returning just HTML and closing
+	HTTP CONNECT with proxy returning HTML and closing
	</name>
	<command>
	http://test.example --proxy http://%HOSTIP:%HTTPPORT --proxytunnel -sS

tests/data/test950+1 -1

@@ -24,7 +24,7 @@ smtp
	SMTP VRFY with custom request
	</name>

-	# the custom request just does it lowercase to remain the same command
+	# the custom request does it lowercase to remain the same command
	<command>
	smtp://%HOSTIP:%SMTPPORT/%TESTNUMBER --mail-rcpt recipient --request "vrfy"
	</command>

tests/ech_tests.sh+2 -2

@@ -31,7 +31,7 @@
	# TODO: Translate this into something that approximates a valid curl test:-)
	# Should be useful though even before such translation and a pile less work
	# to do this than that. The pile of work required would include making an
-	# ECH-enabled server and a DoH server. For now, this is just run manually.
+	# ECH-enabled server and a DoH server. For now, this is run manually.
	#

	# set -x
@@ -1083,7 +1083,7 @@ else
	echo "NOT all good, log in $logfile"
	fi

-	# send a mail to root (will be forwarded) but just once every 24 hours
+	# send a mail to root (will be forwarded) but only once every 24 hours
	# 'cause we only really need "new" news
	itsnews="yes"
	age_of_news=0

tests/ftpserver.pl+4 -4

@@ -562,8 +562,8 @@ sub protocolsetup {
	'LIST' => '150 here comes a directory',
	'NLST' => '150 here comes a directory',
	'CWD' => '250 CWD command successful.',
-	'SYST' => '215 UNIX Type: L8', # just fake something
-	'QUIT' => '221 bye bye baby', # just reply something
+	'SYST' => '215 UNIX Type: L8', # fake something
+	'QUIT' => '221 bye bye baby', # reply something
	'MKD' => '257 Created your requested directory',
	'REST' => '350 Yeah yeah we set it there for you',
	'DELE' => '200 OK OK OK whatever you say',
@@ -1143,7 +1143,7 @@ my $cmdid;
	my $selected;

	# Any IMAP parameter can come in escaped and in double quotes.
-	# This function is dumb (so far) and just removes the quotes if present.
+	# This function is dumb (so far) and removes the quotes if present.
	sub fix_imap_params {
	foreach (@_) {
	$_ = $1 if /^"(.*)"$/;
@@ -3289,7 +3289,7 @@ while(1) {

	my $delay = $delayreply{$FTPCMD};
	if($delay) {
-	# just go sleep this many seconds!
+	# go sleep this many seconds!
	logmsg("Sleep for $delay seconds\n");
	my $twentieths = $delay * 20;
	while($twentieths--) {

tests/getpart.pm+1 -1

@@ -195,7 +195,7 @@ sub partexists {
	}

	# The code currently never calls this more than once per part per file, so
-	# caching a result that is never used again just slows things down.
+	# caching a result that is never used again only slows things down.
	# memoize('partexists', NORMALIZER => 'normalize_part'); # cache each result

	sub loadtest {

tests/globalconfig.pm+1 -1

@@ -124,7 +124,7 @@ our $CURLINFO=dirsepadd("../src/" . ($ENV{'CURL_DIRSUFFIX'} \|\| '')) .

	our $VCURL=$CURL; # what curl binary to use to verify the servers with
	# VCURL is handy to set to the system one when the one you
-	# just built hangs or crashes and thus prevent verification
+	# built hangs or crashes and thus prevent verification
	# the path to the script that analyzes the memory debug output file
	our $memanalyze="$perl " . shell_quote("$srcdir/memanalyze.pl");
	our $valgrind; # path to valgrind, or empty if disabled

tests/http-server.pl+1 -1

@@ -40,7 +40,7 @@ use serverhelp qw(
	);

	my $verbose = 0; # set to 1 for debugging
-	my $port = 8990; # just a default
+	my $port = 8990; # a default
	my $unix_socket; # location to place a listening Unix socket
	my $ipvnum = 4; # default IP version of http server
	my $idnum = 1; # default http server instance number

tests/http/test_02_download.py+2 -2

@@ -145,7 +145,7 @@ class TestDownload:
	])
	r.check_response(http_status=200, count=count)
	# should have used at most 2 connections only (test servers allow 100 req/conn)
-	# it may be just 1 on slow systems where request are answered faster than
+	# it may be 1 on slow systems where request are answered faster than
	# curl can exhaust the capacity or if curl runs with address-sanitizer speed
	assert r.total_connects <= 2, "h2 should use fewer connections here"

@@ -417,7 +417,7 @@ class TestDownload:
	assert r.exit_code == 0, f'{client.dump_logs()}'

	# Special client that tests TLS session reuse in parallel transfers
-	# TODO: just uses a single connection for h2/h3. Not sure how to prevent that
+	# TODO: uses a single connection for h2/h3. Not sure how to prevent that
	@pytest.mark.parametrize("proto", Env.http_protos())
	def test_02_26_session_shared_reuse(self, env: Env, proto, httpd, nghttpx):
	url = f'https://{env.authority_for(env.domain1, proto)}/data-100k'

tests/http/test_05_errors.py+1 -1

@@ -100,7 +100,7 @@ class TestErrors:
	assert r.stats[0]['http_version'] == '1.1', r.dump_logs()

	# On the URL used here, Apache is doing an "unclean" TLS shutdown,
-	# meaning it sends no shutdown notice and just closes TCP.
+	# meaning it sends no shutdown notice and closes TCP.
	# The HTTP response delivers a body without Content-Length. We expect:
	# - http/1.0 to fail since it relies on a clean connection close to
	# detect the end of the body

tests/http/test_14_auth.py+1 -1

@@ -95,7 +95,7 @@ class TestAuth:
	if proto == 'h3' and not env.curl_uses_lib('ngtcp2'):
	# See <https://github.com/cloudflare/quiche/issues/1573>
	pytest.skip("quiche has problems with large requests")
-	# just large enough that nghttp2 will submit
+	# large enough that nghttp2 will submit
	password = 'x' * (47 * 1024)
	fdata = os.path.join(env.gen_dir, 'data-10m')
	curl = CurlClient(env=env)

tests/http/test_30_vsftpd.py+2 -2

@@ -148,7 +148,7 @@ class TestVsFTPD:
	@pytest.mark.skipif(condition=not Env.tcpdump(), reason="tcpdump not available")
	@pytest.mark.skipif(condition=not Env.curl_is_debug(), reason="needs curl debug")
	@pytest.mark.skipif(condition=not Env.curl_is_verbose(), reason="needs curl verbose strings")
-	def test_30_06_shutdownh_download(self, env: Env, vsftpd: VsFTPD):
+	def test_30_06_shutdown_download(self, env: Env, vsftpd: VsFTPD):
	docname = 'data-1k'
	curl = CurlClient(env=env)
	count = 1
@@ -166,7 +166,7 @@ class TestVsFTPD:
	@pytest.mark.skipif(condition=not Env.tcpdump(), reason="tcpdump not available")
	@pytest.mark.skipif(condition=not Env.curl_is_debug(), reason="needs curl debug")
	@pytest.mark.skipif(condition=not Env.curl_is_verbose(), reason="needs curl verbose strings")
-	def test_30_07_shutdownh_upload(self, env: Env, vsftpd: VsFTPD):
+	def test_30_07_shutdown_upload(self, env: Env, vsftpd: VsFTPD):
	docname = 'upload-1k'
	curl = CurlClient(env=env)
	srcfile = os.path.join(env.gen_dir, docname)

tests/http/test_31_vsftpds.py+2 -2

@@ -153,7 +153,7 @@ class TestVsFTPD:
	@pytest.mark.skipif(condition=not Env.tcpdump(), reason="tcpdump not available")
	@pytest.mark.skipif(condition=not Env.curl_is_debug(), reason="needs curl debug")
	@pytest.mark.skipif(condition=not Env.curl_is_verbose(), reason="needs curl verbose strings")
-	def test_31_06_shutdownh_download(self, env: Env, vsftpds: VsFTPD):
+	def test_31_06_shutdown_download(self, env: Env, vsftpds: VsFTPD):
	docname = 'data-1k'
	curl = CurlClient(env=env)
	count = 1
@@ -170,7 +170,7 @@ class TestVsFTPD:
	@pytest.mark.skipif(condition=not Env.tcpdump(), reason="tcpdump not available")
	@pytest.mark.skipif(condition=not Env.curl_is_debug(), reason="needs curl debug")
	@pytest.mark.skipif(condition=not Env.curl_is_verbose(), reason="needs curl verbose strings")
-	def test_31_07_shutdownh_upload(self, env: Env, vsftpds: VsFTPD):
+	def test_31_07_shutdown_upload(self, env: Env, vsftpds: VsFTPD):
	docname = 'upload-1k'
	curl = CurlClient(env=env)
	srcfile = os.path.join(env.gen_dir, docname)

tests/http/test_32_ftps_vsftpd.py+2 -2

@@ -166,7 +166,7 @@ class TestFtpsVsFTPD:
	@pytest.mark.skipif(condition=not Env.tcpdump(), reason="tcpdump not available")
	@pytest.mark.skipif(condition=not Env.curl_is_debug(), reason="needs curl debug")
	@pytest.mark.skipif(condition=not Env.curl_is_verbose(), reason="needs curl verbose strings")
-	def test_32_06_shutdownh_download(self, env: Env, vsftpds: VsFTPD):
+	def test_32_06_shutdown_download(self, env: Env, vsftpds: VsFTPD):
	docname = 'data-1k'
	curl = CurlClient(env=env)
	count = 1
@@ -183,7 +183,7 @@ class TestFtpsVsFTPD:
	@pytest.mark.skipif(condition=not Env.tcpdump(), reason="tcpdump not available")
	@pytest.mark.skipif(condition=not Env.curl_is_debug(), reason="needs curl debug")
	@pytest.mark.skipif(condition=not Env.curl_is_verbose(), reason="needs curl verbose strings")
-	def test_32_07_shutdownh_upload(self, env: Env, vsftpds: VsFTPD):
+	def test_32_07_shutdown_upload(self, env: Env, vsftpds: VsFTPD):
	docname = 'upload-1k'
	curl = CurlClient(env=env)
	srcfile = os.path.join(env.gen_dir, docname)

tests/http/test_60_h3_proxy.py+1 -1

@@ -285,7 +285,7 @@ class TestH3Proxy:
	)

	# An HTTP/3 target auto-triggers CONNECT-UDP even without --proxytunnel,
-	# just as HTTPS targets auto-trigger CONNECT. nghttpx does not support
+	# as HTTPS targets auto-trigger CONNECT. nghttpx does not support
	# CONNECT-UDP so this fails, which confirms auto-CONNECT-UDP is active.
	assert r.exit_code != 0, (
	"expected failure: h3 target auto-triggers CONNECT-UDP "

tests/http/testenv/curl.py+1 -1

@@ -1239,7 +1239,7 @@ class CurlClient:

	def _perf_collapse(self, perf: PerfProfile, file_err):
	if not os.path.exists(perf.file):
-	raise Exception(f'dtrace output file does not exist: {perf.file}')
+	raise Exception(f'perf output file does not exist: {perf.file}')
	fg_collapse = os.path.join(self._fg_dir, 'stackcollapse-perf.pl')
	if not os.path.exists(fg_collapse):
	raise Exception(f'FlameGraph script not found: {fg_collapse}')

tests/http/testenv/mod_curltest/mod_curltest.c+4 -4

@@ -339,7 +339,7 @@ static int curltest_tweak_handler(request_rec *r)
	}
	}
	else if(!strcmp("id", arg)) {
-	/* just an id for repeated requests with curl's URL globbing */
+	/* an id for repeated requests with curl's URL globbing */
	request_id = val;
	continue;
	}
@@ -551,7 +551,7 @@ static int curltest_put_handler(request_rec *r)
	*s = '\0';
	val = s + 1;
	if(!strcmp("id", arg)) {
-	/* just an id for repeated requests with curl's URL globbing */
+	/* an id for repeated requests with curl's URL globbing */
	request_id = val;
	continue;
	}
@@ -748,7 +748,7 @@ static int curltest_sslinfo_handler(request_rec *r)
	*s = '\0';
	val = s + 1;
	if(!strcmp("id", arg)) {
-	/* just an id for repeated requests with curl's URL globbing */
+	/* an id for repeated requests with curl's URL globbing */
	request_id = val;
	continue;
	}
@@ -862,7 +862,7 @@ static int curltest_limit_handler(request_rec *r)
	*s = '\0';
	val = s + 1;
	if(!strcmp("id", arg)) {
-	/* just an id for repeated requests with curl's URL globbing */
+	/* an id for repeated requests with curl's URL globbing */
	request_id = val;
	continue;
	}

tests/libtest/first.c+1 -1

@@ -201,7 +201,7 @@ CURLcode ws_recv_pong(CURL curl, const char expected_payload)
	return CURLE_RECV_ERROR;
	}

-	/* just close the connection */
+	/* close the connection */
	void ws_close(CURL *curl)
	{
	size_t sent;

tests/libtest/first.h+2 -2

@@ -54,7 +54,7 @@ extern int unitfail; /* for unittests */
	#include "curlx/wait.h" /* for curlx_wait_ms() */

	#ifdef HAVE_SYS_SELECT_H
-	/* since so many tests use select(), we can just as well include it here */
+	/* since so many tests use select(), we can as well include it here */
	#include <sys/select.h>
	#endif

@@ -99,7 +99,7 @@ extern char hexdump(const unsigned char buf, size_t len);
	#ifndef CURL_DISABLE_WEBSOCKETS
	CURLcode ws_send_ping(CURL curl, const char send_payload);
	CURLcode ws_recv_pong(CURL curl, const char expected_payload);
-	void ws_close(CURL curl); / just close the connection */
+	void ws_close(CURL curl); / close the connection */
	#endif

	/*

tests/libtest/lib1518.c+1 -1

@@ -64,7 +64,7 @@ static CURLcode test_lib1518(const char *URL)
	}
	else {
	test_setopt(curl, CURLOPT_URL, URL);
-	/* just to make it explicit and visible in this test: */
+	/* to make it explicit and visible in this test: */
	test_setopt(curl, CURLOPT_FOLLOWLOCATION, 0L);
	}

tests/libtest/lib1537.c+1 -1

@@ -77,7 +77,7 @@ static CURLcode test_lib1537(const char *URL)
	curl_mprintf("escape -1 length: %s\n", ptr);

	/* weird input length */
-	outlen = 2017; /* just a value */
+	outlen = 2017; /* an arbitrary value */
	ptr = curl_easy_unescape(NULL, "moahahaha", -1, &outlen);
	curl_mprintf("unescape -1 length: %s %d\n", ptr, outlen);

tests/libtest/lib1592.c+3 -3

@@ -61,20 +61,20 @@ static CURLcode test_lib1592(const char *URL)
	/* Since we could set the DNS server, presume we are working with a
	resolver that can be cancelled (i.e. c-ares). Thus,
	curl_multi_remove_handle() should not block even when the resolver
-	request is outstanding. So, set a request timeout _longer_ than the
+	request is outstanding. Thus, set a request timeout _longer_ than the
	test hang timeout so we will fail if the handle removal call incorrectly
	blocks. */
	timeout = TEST_HANG_TIMEOUT * 2;
	else {
	/* If we cannot set the DNS server, presume that we are configured to use
	a resolver that cannot be cancelled (i.e. the threaded resolver or the
-	non-threaded blocking resolver). So, we just test that the
+	non-threaded blocking resolver). Thus, we test that the
	curl_multi_remove_handle() call does finish well within our test
	timeout.

	But, it is unlikely that the resolver request will take any time at
	all because we have not been able to configure the resolver to use an
-	non-responsive DNS server. At least we exercise the flow.
+	non-responsive DNS server. At least we exercise the flow.
	*/
	curl_mfprintf(stderr,
	"CURLOPT_DNS_SERVERS not supported; "

tests/libtest/lib1908.c+1 -1

@@ -52,7 +52,7 @@ static CURLcode test_lib1908(const char *URL)
	curl_easy_reset(curl);

	/* using the same filename for the alt-svc cache, this clobbers the
-	content just written from the 'curldupe' handle */
+	content written from the 'curldupe' handle */
	curl_easy_cleanup(curl);
	}
	curl_global_cleanup();

tests/libtest/lib1911.c+1 -1

@@ -43,7 +43,7 @@ static CURLcode test_lib1911(const char *URL)
	return TEST_ERR_EASY_INIT;
	}

-	/* make it a null-terminated C string with just As */
+	/* make it a null-terminated C string with only As */
	memset(testbuf, 'A', MAX_INPUT_LENGTH + 1);
	testbuf[MAX_INPUT_LENGTH + 1] = 0;

tests/libtest/lib1939.c+1 -1

@@ -51,7 +51,7 @@ static CURLcode test_lib1939(const char *URL)
	mresult = curl_multi_add_handle(multi, curl);

	if(!mresult)
-	/* Run the multi handle once, just enough to start establishing an
+	/* Run the multi handle once, enough to start establishing an
	HTTPS connection. */
	mresult = curl_multi_perform(multi, &running_handles);

tests/libtest/lib1977.c+1 -1

@@ -34,7 +34,7 @@ static CURLcode test_lib1977(const char *URL)
	global_init(CURL_GLOBAL_ALL);
	easy_init(curl);

-	/* first transfer: set just the URL in the first CURLU handle */
+	/* first transfer: set the URL in the first CURLU handle */
	curl_url_set(curlu, CURLUPART_URL, URL, CURLU_DEFAULT_SCHEME);
	easy_setopt(curl, CURLOPT_CURLU, curlu);

tests/libtest/lib3027.c+1 -1

@@ -41,7 +41,7 @@ static CURLcode test_lib3027(const char *URL)
	result = curl_easy_getinfo(curl, CURLINFO_FILETIME, &filetime);
	/* MTDM fails with 550, so filetime should be -1 */
	if((result == CURLE_OK) && (filetime != -1)) {
-	/* we just need to return something which is not CURLE_OK */
+	/* we need to return something which is not CURLE_OK */
	result = CURLE_UNSUPPORTED_PROTOCOL;
	}
	}

tests/libtest/lib501.c+1 -1

@@ -44,7 +44,7 @@ static CURLcode test_lib501(const char *URL)

	test_setopt(curl, CURLOPT_HEADER, 1L);

-	/* just verify that setting this to -1 is fine */
+	/* verify that setting this to -1 is fine */
	test_setopt(curl, CURLOPT_MAXREDIRS, -1L);

	result = curl_easy_perform(curl);

tests/libtest/lib505.c+1 -1

@@ -24,7 +24,7 @@
	#include "first.h"

	/*
-	* This example shows an FTP upload, with a rename of the file just after
+	* This example shows an FTP upload, with a rename of the file right after
	* a successful upload.
	*
	* Example based on source code provided by Erick Nuwendam. Thanks!

tests/libtest/lib518.c+2 -2

@@ -136,7 +136,7 @@ static int t518_test_rlimit(int keep_open)
	curl_mfprintf(stderr, "raising soft limit up to OPEN_MAX\n");
	rl.rlim_cur = OPEN_MAX;
	if(setrlimit(RLIMIT_NOFILE, &rl) != 0) {
-	/* on failure do not abort just issue a warning */
+	/* on failure do not abort, only issue a warning */
	t518_store_errmsg("setrlimit() failed", errno);
	curl_mfprintf(stderr, "%s\n", t518_msgbuff);
	t518_msgbuff[0] = '\0';
@@ -147,7 +147,7 @@ static int t518_test_rlimit(int keep_open)
	curl_mfprintf(stderr, "raising soft limit up to hard limit\n");
	rl.rlim_cur = rl.rlim_max;
	if(setrlimit(RLIMIT_NOFILE, &rl) != 0) {
-	/* on failure do not abort just issue a warning */
+	/* on failure do not abort, only issue a warning */
	t518_store_errmsg("setrlimit() failed", errno);
	curl_mfprintf(stderr, "%s\n", t518_msgbuff);
	t518_msgbuff[0] = '\0';

tests/libtest/lib537.c+2 -2

@@ -137,7 +137,7 @@ static int t537_test_rlimit(int keep_open)
	curl_mfprintf(stderr, "raising soft limit up to OPEN_MAX\n");
	rl.rlim_cur = OPEN_MAX;
	if(setrlimit(RLIMIT_NOFILE, &rl) != 0) {
-	/* on failure do not abort just issue a warning */
+	/* on failure do not abort, only issue a warning */
	t537_store_errmsg("setrlimit() failed", errno);
	curl_mfprintf(stderr, "%s\n", t537_msgbuff);
	t537_msgbuff[0] = '\0';
@@ -148,7 +148,7 @@ static int t537_test_rlimit(int keep_open)
	curl_mfprintf(stderr, "raising soft limit up to hard limit\n");
	rl.rlim_cur = rl.rlim_max;
	if(setrlimit(RLIMIT_NOFILE, &rl) != 0) {
-	/* on failure do not abort just issue a warning */
+	/* on failure do not abort, only issue a warning */
	t537_store_errmsg("setrlimit() failed", errno);
	curl_mfprintf(stderr, "%s\n", t537_msgbuff);
	t537_msgbuff[0] = '\0';

tests/libtest/test613.pl+1 -1

@@ -140,7 +140,7 @@ elsif($ARGV[0] eq "postprocess") {
	my $line = sprintf("%s%s???????%5d U U %15d %s %s\n", $1,$2,$5,$6,$7,$8);
	push @canondir, $line;
	} else {
-	# Unexpected format; just pass it through and let the test fail
+	# Unexpected format; pass it through and let the test fail
	push @canondir, $_;
	}
	}

tests/negtelnetserver.py+1 -1

@@ -167,7 +167,7 @@ class Negotiator:
	log.debug("Starting negotiation (IAC)")
	self.state = self.START_NEG
	else:
-	# Just append the incoming byte to the buffer
+	# Append the incoming byte to the buffer
	buffer.append(byte_int)

	def start_neg(self, byte_int):

tests/rtspserver.pl+1 -1

@@ -38,7 +38,7 @@ use serverhelp qw(
	);

	my $verbose = 0; # set to 1 for debugging
-	my $port = 8990; # just a default
+	my $port = 8990; # a default
	my $ipvnum = 4; # default IP version of rtsp server
	my $idnum = 1; # default rtsp server instance number
	my $proto = 'rtsp'; # protocol the rtsp server speaks

tests/runtests.pl+4 -5

@@ -1724,8 +1724,7 @@ sub singletest_check {
	my @sout = sort @out;

	if($hostname) {
-	# when a hostname is set, we filter out requests to just this
-	# pattern
+	# when a hostname is set, we filter out requests to this pattern
	@sout = grep {/$hostname/} @sout;
	}

@@ -2675,7 +2674,7 @@ if($valgrind) {
	# since valgrind 2.1.x, '--tool' option is mandatory
	# use it, if it is supported by the version installed on the system
	# (this happened in 2003, so we could probably do not need to care about
-	# that old version any longer and just delete this check)
+	# that old version any longer and delete this check)
	runclient("valgrind --help 2>&1 \| grep -- --tool >$dev_null 2>&1");
	if(($? >> 8)) {
	$valgrind_tool="";
@@ -2690,7 +2689,7 @@ if($valgrind) {

	# valgrind 3 renamed the --logfile option to --log-file!!!
	# (this happened in 2005, so we could probably do not need to care about
-	# that old version any longer and just delete this check)
+	# that old version any longer and delete this check)
	my $ver=join(' ', runclientoutput("valgrind --version"));
	# cut off all but digits and dots
	$ver =~ s/[^0-9.]//g;
@@ -3212,7 +3211,7 @@ while(1) {
	$endwaitcnt += $runnerwait;
	if($endwaitcnt >= 10) {
	# Once all tests have been scheduled on a runner at the end of a test
-	# run, we just wait for their results to come in. If we are still
+	# run, we wait for their results to come in. If we are still
	# waiting after a couple of minutes ($endwaitcnt multiplied by
	# $runnerwait, plus $jobs because that number will not time out), display
	# the same test runner status as we give with a SIGUSR1. This will

tests/secureserver.pl+3 -3

@@ -24,7 +24,7 @@
	#***************************************************************************

	# This is the HTTPS, FTPS, POP3S, IMAPS, SMTPS, server used for curl test
-	# harness. Actually just a layer that runs stunnel properly using the
+	# harness. Actually a layer that runs stunnel properly using the
	# non-secure test harness servers.

	use strict;
@@ -50,7 +50,7 @@ my $stunnel = "stunnel";

	my $verbose=0; # set to 1 for debugging

-	my $accept_port = 8991; # just our default, weird enough
+	my $accept_port = 8991; # our default, weird enough
	my $target_port = 8999; # default test http-server port

	my $stuncert;
@@ -370,7 +370,7 @@ if($tstunnel_windows) {
	# new process to the parent waiting perl.exe and sh.exe processes.

	# exec() should never return back here to this process. We protect
-	# ourselves by calling die() just in case something goes really bad.
+	# ourselves by calling die() in case something goes really bad.
	die "error: exec() has returned";
	}

tests/server/getpart.c+2 -2

@@ -202,7 +202,7 @@ static int decodedata(char *buf, / dest buffer */
	/*
	* currently there is no way to tell apart an OOM condition in
	* curlx_base64_decode() from zero length decoded data. For now,
-	* let's just assume it is an OOM condition, currently we have
+	* let's assume it is an OOM condition, currently we have
	* no input for this function that decodes to zero length data.
	*/
	free(buf64);
@@ -231,7 +231,7 @@ static int decodedata(char *buf, / dest buffer */
	* and the size of the data is stored at the addresses that caller specifies.
	*
	* If the returned data is a string the returned size will be the length of
-	* the string excluding null-termination. Otherwise it will just be the size
+	* the string excluding null-termination. Otherwise it will be the size
	* of the returned binary data.
	*
	* Calling function is responsible to free returned buffer.

tests/server/rtspd.c+2 -2

@@ -97,7 +97,7 @@ struct rtspd_httprequest {
	#define CMD_AUTH_REQUIRED "auth_required"

	/* 'idle' means that it will accept the request fine but never respond
-	any data. Just keep the connection alive. */
+	any data. Keep the connection alive. */
	#define CMD_IDLE "idle"

	/* 'stream' means to send a never-ending stream of data */
@@ -890,7 +890,7 @@ static int rtspd_send_doc(curl_socket_t sock, struct rtspd_httprequest *req)

	responsesize = count;
	do {
-	/* Ok, we send no more than 200 bytes at a time, just to make sure that
+	/* Ok, we send no more than 200 bytes at a time, to make sure that
	larger chunks are split up so that the client will need to do multiple
	recv() calls to get it and thus we exercise that code better */
	size_t num = count;

tests/server/sockfilt.c+8 -9

@@ -68,14 +68,13 @@
	* 'exit_signal_handler' for both signals.
	*
	* The 'exit_signal_handler' upon the first SIGINT or SIGTERM received signal
-	* will just set to one the global var 'got_exit_signal' storing in global var
+	* sets to one the global var 'got_exit_signal' storing in global var
	* 'exit_signal' the signal that triggered this change.
	*
	* Nothing fancy that could introduce problems is used, the program at certain
	* points in its normal flow checks if var 'got_exit_signal' is set and in
-	* case this is true it just makes its way out of loops and functions in
-	* structured and well behaved manner to achieve proper program cleanup and
-	* termination.
+	* case this is true it makes its way out of loops and functions in structured
+	* and well behaved manner to achieve proper program cleanup and termination.
	*
	* Even with the above mechanism implemented it is worthwhile to note that
	* other signals might still be received, or that there might be systems on
@@ -172,7 +171,7 @@ static ssize_t write_wincon(int fd, const void *buf, size_t count)
	#endif

	/* On Windows, we sometimes get this for a broken pipe, seemingly
-	* when the client just closed stdin? */
+	* when the client closed stdin? */
	#define CURL_WIN32_EPIPE 109

	/*
@@ -897,7 +896,7 @@ static bool disc_handshake(void)
	return FALSE;
	}
	else if(!memcmp("QUIT", buffer, 4)) {
-	/* just die */
+	/* die */
	logmsg("quits");
	return FALSE;
	}
@@ -945,7 +944,7 @@ static bool juggle(curl_socket_t *sockfdp,
	}

	#ifdef HAVE_GETPPID
-	/* As a last resort, quit if sockfilt process becomes orphan. Just in case
+	/* As a last resort, quit if sockfilt process becomes orphan. In case
	parent ftpserver process has died without killing its sockfilt children */
	if(getppid() <= 1) {
	logmsg("process becomes orphan, exiting");
@@ -1055,7 +1054,7 @@ static bool juggle(curl_socket_t *sockfdp,
	buffer[0], buffer[1], buffer[2], buffer[3]);

	if(!memcmp("PING", buffer, 4)) {
-	/* send reply on stdout, just proving we are alive */
+	/* send reply on stdout, proving we are alive */
	if(!write_stdout("PONG\n", 5))
	return FALSE;
	}
@@ -1073,7 +1072,7 @@ static bool juggle(curl_socket_t *sockfdp,
	return FALSE;
	}
	else if(!memcmp("QUIT", buffer, 4)) {
-	/* just die */
+	/* die */
	logmsg("quits");
	return FALSE;
	}

tests/server/sws.c+3 -3

@@ -113,7 +113,7 @@ static const char *cmdfile = "log/server.cmd";
	#define CMD_AUTH_REQUIRED "auth_required"

	/* 'idle' means that it will accept the request fine but never respond
-	any data. Just keep the connection alive. */
+	any data. Keep the connection alive. */
	#define CMD_IDLE "idle"

	/* 'stream' means to send a never-ending stream of data */
@@ -304,7 +304,7 @@ static int sws_parse_servercmd(struct sws_httprequest *req)
	else {
	logmsg("Unknown <servercmd> instruction found: %s", cmd);
	}
-	/* try to deal with CRLF or just LF */
+	/* try to deal with CRLF or LF */
	check = strchr(cmd, '\r');
	if(!check)
	check = strchr(cmd, '\n');
@@ -966,7 +966,7 @@ static int sws_send_doc(curl_socket_t sock, struct sws_httprequest *req)

	responsesize = count;
	do {
-	/* Ok, we send no more than N bytes at a time, just to make sure that
+	/* Ok, we send no more than N bytes at a time, to make sure that
	larger chunks are split up so that the client will need to do multiple
	recv() calls to get it and thus we exercise that code better */
	size_t num = count;

tests/server/tftpd.c+6 -6

@@ -413,7 +413,7 @@ static ssize_t write_behind(struct testcase *test, int convert)

	b = &bfs[nextone];
	if(b->counter < -1) /* anything to flush? */
-	return 0; /* just nop if nothing to do */
+	return 0; /* nop if nothing to do */

	if(!test->ofile) {
	char outfile[256];
@@ -453,11 +453,11 @@ static ssize_t write_behind(struct testcase *test, int convert)
	while(ct--) { /* loop over the buffer */
	c = (unsigned char)p++; / pick up a character */
	if(prevchar == '\r') { /* if prev char was cr */
-	if(c == '\n') /* if have cr,lf then just */
+	if(c == '\n') /* if have cr,lf then */
	curl_lseek(test->ofile, -1, SEEK_CUR); /* smash lf on top of the cr */
	else if(c == '\0') /* if have cr,nul then */
-	goto skipit; /* just skip over the putc */
-	/* else just fall through and allow it */
+	goto skipit; /* skip over the putc */
+	/* else fall through and allow it */
	}
	/* formerly
	putc(c, file); */
@@ -570,7 +570,7 @@ static int tftpd_parse_servercmd(struct testcase *req)
	else {
	logmsg("Unknown <servercmd> instruction found: %s", cmd);
	}
-	/* try to deal with CRLF or just LF */
+	/* try to deal with CRLF or LF */
	check = strchr(cmd, '\r');
	if(!check)
	check = strchr(cmd, '\n');
@@ -858,7 +858,7 @@ send_ack:
	rap->th_block = htons(recvblock);
	(void)swrite(peer, &ackbuf.storage[0], 4);
	#if defined(HAVE_ALARM) && defined(SIGALRM)
-	mysignal(SIGALRM, justtimeout); /* just abort read on timeout */
+	mysignal(SIGALRM, justtimeout); /* abort read on timeout */
	alarm(rexmtval);
	#endif
	/* normally times out and quits */

tests/serverhelp.pm+1 -1

@@ -67,7 +67,7 @@ use testutil qw(
	our $logfile; # server log filename, for logmsg

	#***************************************************************************
-	# Just for convenience, test harness uses 'https' and 'httptls' literals as
+	# For convenience, test harness uses 'https' and 'httptls' literals as
	# values for 'proto' variable in order to differentiate different servers.
	# 'https' literal is used for stunnel based https test servers, and 'httptls'
	# is used for non-stunnel https test servers.

tests/servers.pm+6 -6

@@ -265,7 +265,7 @@ sub init_serverpidfile_hash {
	}

	#######################################################################
-	# Check if a given child process has just died. Reaps it if so.
+	# Check if a given child process has died. Reaps it if so.
	#
	sub checkdied {
	my $pid = $_[0];
@@ -354,7 +354,7 @@ sub startnew {
	exec("exec $cmd") \|\| die "Cannot exec() $cmd: $!";

	# exec() should never return back here to this process. We protect
-	# ourselves by calling die() just in case something goes really bad.
+	# ourselves by calling die() in case something goes really bad.
	die "error: exec() has returned";
	}

@@ -382,17 +382,17 @@ sub startnew {
	$pid2 = pidfromfile($pidfile, 0);
	if(($pid2 > 0) && pidexists($pid2)) {
	# if $pid2 is valid, then make sure this pid is alive, as
-	# otherwise it is just likely to be the _previous_ pidfile or
+	# otherwise it is likely to be the _previous_ pidfile or
	# similar!
	last;
	}
	if(checkdied($child)) {
	logmsg "startnew: child process has died, server might start up\n"
	if($verbose);
-	# We cannot just abort waiting for the server with a
+	# We cannot abort waiting for the server with a
	# return (-1,-1);
	# because the server might have forked and could still start
-	# up normally. Instead, just reduce the amount of time we remain
+	# up normally. Instead, reduce the amount of time we remain
	# waiting.
	$count >>= 2;
	}
@@ -1012,7 +1012,7 @@ sub verifytelnet {
	# particular can take a long time to start if it needs to generate
	# keys on a slow or loaded host.
	#
-	# Just for convenience, test harness uses 'https' and 'httptls' literals
+	# For convenience, test harness uses 'https' and 'httptls' literals
	# as values for 'proto' variable in order to differentiate different
	# servers. 'https' literal is used for stunnel based https test servers,
	# and 'httptls' is used for non-stunnel https test servers.

tests/smbserver.py+1 -1

@@ -76,7 +76,7 @@ class ShutdownHandler(threading.Thread):
	signal.signal(signal.SIGTERM, self._sighandler)

	def __exit__(self, *_):
-	# Call for shutdown just in case it was not done already
+	# Call for shutdown in case it was not done already
	self.shutdown_event.set()
	# Wait for thread, and therefore also the server, to finish
	self.join()

tests/sshserver.pl+1 -1

@@ -1190,7 +1190,7 @@ if($sshdid =~ /OpenSSH-Windows/) {
	# new process to the parent waiting perl.exe and sh.exe processes.

	# exec() should never return back here to this process. We protect
-	# ourselves by calling die() just in case something goes really bad.
+	# ourselves by calling die() in case something goes really bad.
	die "error: exec() has returned";
	}

tests/test1119.pl+2 -2

@@ -165,7 +165,7 @@ close $s;

	my $ignored=0;
	for my $e (sort @syms) {
-	# OBSOLETE - names that are just placeholders for a position where we
+	# OBSOLETE - names that are placeholders for a position where we
	# previously had a name, that is now removed. The OBSOLETE names should
	# never be used for anything.
	#
@@ -176,7 +176,7 @@ for my $e (sort @syms) {
	#
	# CURL_TEMP_ - are defined and undefined again within the file
	#
-	# _LAST and _LASTENTRY are just suffix for the placeholders used for the
+	# _LAST and _LASTENTRY are suffix for the placeholders used for the
	# last entry in many enum series.
	#

tests/test1173.pl+1 -1

@@ -158,7 +158,7 @@ sub scanmanpage {
	while(<$m>) {
	chomp;
	if($_ =~ /^.so /) {
-	# this man page is just a referral
+	# this man page is a referral
	close($m);
	return;
	}

tests/tftpserver.pl+1 -1

@@ -38,7 +38,7 @@ use serverhelp qw(
	);

	my $verbose = 0; # set to 1 for debugging
-	my $port = 8997; # just a default
+	my $port = 8997; # a default
	my $ipvnum = 4; # default IP version of tftp server
	my $idnum = 1; # default tftp server instance number
	my $proto = 'tftp'; # protocol the tftp server speaks

tests/unit/unit1303.c+1 -1

@@ -44,7 +44,7 @@ static void t1303_stop(struct Curl_easy *easy)
	curl_global_cleanup();
	}

-	/* BASE is just a define to make us fool around with decently large number so
+	/* BASE is a define to make us fool around with decently large number so
	that we are not zero-based */
	#define BASE 1000000

tests/unit/unit1609.c+1 -1

@@ -46,7 +46,7 @@ static CURLcode t1609_setup(void)
	we set address using CURLOPT_RESOLVE,
	it usually marks as permanent (by setting timestamp to zero). However,
	if address already exists
-	in the cache, then it does not mark it, but just leaves it as it is.
+	in the cache, then it does not mark it, but leaves it as it is.
	So we fixing this by timestamp to zero if address already exists too.

	Test:

tests/unit/unit1615.c+1 -1

@@ -108,7 +108,7 @@ static CURLcode test_unit1615(const char *arg)
	};

	unsigned char output_buf[CURL_SHA512_256_DIGEST_LENGTH];
-	const unsigned char computed_hash; / Just to mute compiler warning */
+	const unsigned char computed_hash; / to mute compiler warning */

	/* Mute compiler warnings in 'verify_memory' macros below */
	computed_hash = output_buf;

tests/unit/unit1625.c+1 -1

@@ -52,7 +52,7 @@ static CURLcode test_unit1625(const char *arg)
	{ "Encoding: a, chunked, ninja", "Encoding:", "chunked", TRUE },
	/* empty incoming header */
	{ "Encoding:", "Encoding:", "chunked", FALSE },
-	/* just spaces in header */
+	/* spaces in header */
	{ "Encoding: ", "Encoding:", "chunked", FALSE },
	/* last among several with no spaces */
	{ "Encoding: ab,cd,ef,gh,ig,kl", "Encoding:", "kl", TRUE },

tests/unit/unit1652.c+3 -3

@@ -119,7 +119,7 @@ static CURLcode test_unit1652(const char *arg)
	* Any input that long or longer will truncated, ending in '...\n'.
	*/

-	/* A string just long enough to not be truncated */
+	/* A string long enough to not be truncated */
	memset(input, '\0', sizeof(input));
	memset(input, 'A', 2045);
	Curl_infof(easy, "%s", input);
@@ -130,7 +130,7 @@ static CURLcode test_unit1652(const char *arg)
	fail_unless(output[sizeof(output) - 1] == '\0',
	"No truncation of infof input");

-	/* Just over the limit without newline for truncation via '...' */
+	/* Over the limit without newline for truncation via '...' */
	memset(input + 2045, 'A', 4);
	Curl_infof(easy, "%s", input);
	curl_mfprintf(stderr, "output len %zu: %s", strlen(output), output);
@@ -138,7 +138,7 @@ static CURLcode test_unit1652(const char *arg)
	fail_unless(output[sizeof(output) - 1] == '\0',
	"Truncation of infof input 1");

-	/* Just over the limit with newline for truncation via '...' */
+	/* Over the limit with newline for truncation via '...' */
	memset(input + 2045, 'A', 4);
	memset(input + 2045 + 4, '\n', 1);
	Curl_infof(easy, "%s", input);

tests/unit/unit1655.c+1 -1

@@ -51,7 +51,7 @@ static CURLcode test_unit1655(const char *arg)
	static const char toolong[] =
	/* ..\|....1.........2.........3.........4.........5.........6... */
	/* 3456789012345678901234567890123456789012345678901234567890123 */
-	"here.is.a.hostname.which.is.just.barely.too.long." /* 49: 49 */
+	"here.is.a.hostname.which.is.only.barely.too.long." /* 49: 49 */
	"to.be.encoded.as.a.QNAME.of.the.maximum.allowed.length."
	/* 55: 104 */
	"which.is.256.including.a.final.zero-length.label." /* 49: 153 */

tests/unit/unit1660.c+1 -1

@@ -45,7 +45,7 @@ static CURLcode test_unit1660(const char *arg)
	struct testit {
	const char *host;
	const char chost; / if non-NULL, use to lookup with */
-	const char hdr; / if NULL, just do the lookup */
+	const char hdr; / if NULL, do the lookup */
	const CURLcode result; /* parse result */
	};

tests/unit/unit1666.c+1 -1

@@ -146,7 +146,7 @@ static CURLcode test_unit1666(const char *arg)
	"\x01\x01\x01\x01\x01\x01\x01\x01\x01\x01"
	"\x01\x01\x01\x01\x01\x01\x01\x01"),
	"", CURLE_TOO_LARGE },
-	/* one byte shorter than the previous is just below the limit: */
+	/* one byte shorter than the previous is below the limit: */
	{ OID("\x2b\x01\x01\x01\x01\x01\x01\x01\x01\x01\x01\x01\x01\x01\x01\x01"
	"\x01\x01\x01\x01\x01\x01\x01\x01\x01\x01\x01\x01\x01\x01\x01\x01"
	"\x01\x01\x01\x01\x01\x01\x01\x01\x01\x01"

tests/unit/unit2600.c+1 -1

@@ -160,7 +160,7 @@ static CURLcode cf_test_adjust_pollset(struct Curl_cfilter *cf,
	struct easy_pollset *ps)
	{
	struct cf_test_ctx *ctx = cf->ctx;
-	/* just for testing, give one socket with events back */
+	/* for testing, give one socket with events back */
	return Curl_pollset_set(data, ps, ctx->idx, TRUE, TRUE);
	}