← Commit list

ddaa85893d

Daniel Stenberg

2021-11-15

SUCCESS Duration: 117s

Subject

curl.1: require "see also" for every documented option

Binary

Download Binary (725 KB)

Architecture & Compiler Flags

Architecture: x86_64-linux-gnu Compiler: gcc (Ubuntu 11.4.0-1ubuntu1~22.04.3) 11.4.0

—

Build Log

$ git checkout -f ddaa85893d8ca62b96454de3a98ebb4e750fdc36
Previous HEAD position was 2511a41bf9 docs/cmdline-opts: do not say "protocols: all"
HEAD is now at ddaa85893d curl.1: require "see also" for every documented option

$ git clean -fdx
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing curl-config
Removing depcomp
Removing docs/Makefile
Removing docs/Makefile.in
Removing docs/cmdline-opts/Makefile
Removing docs/cmdline-opts/Makefile.in
Removing docs/curl.1
Removing docs/examples/.deps/
Removing docs/examples/Makefile
Removing docs/examples/Makefile.in
Removing docs/libcurl/Makefile
Removing docs/libcurl/Makefile.in
Removing docs/libcurl/opts/Makefile
Removing docs/libcurl/opts/Makefile.in
Removing include/Makefile
Removing include/Makefile.in
Removing include/curl/Makefile
Removing include/curl/Makefile.in
Removing install-sh
Removing lib/.deps/
Removing lib/.dirstamp
Removing lib/.libs/
Removing lib/Makefile
Removing lib/Makefile.in
Removing lib/curl_config.h
Removing lib/curl_config.h.in
Removing lib/curl_ctype.o
Removing lib/curl_multibyte.o
Removing lib/dynbuf.o
Removing lib/libcurl.la
Removing lib/libcurl.vers
Removing lib/libcurl_la-altsvc.lo
Removing lib/libcurl_la-altsvc.o
Removing lib/libcurl_la-amigaos.lo
Removing lib/libcurl_la-amigaos.o
Removing lib/libcurl_la-asyn-ares.lo
Removing lib/libcurl_la-asyn-ares.o
Removing lib/libcurl_la-asyn-thread.lo
Removing lib/libcurl_la-asyn-thread.o
Removing lib/libcurl_la-base64.lo
Removing lib/libcurl_la-base64.o
Removing lib/libcurl_la-bufref.lo
Removing lib/libcurl_la-bufref.o
Removing lib/libcurl_la-c-hyper.lo
Removing lib/libcurl_la-c-hyper.o
Removing lib/libcurl_la-conncache.lo
Removing lib/libcurl_la-conncache.o
Removing lib/libcurl_la-connect.lo
Removing lib/libcurl_la-connect.o
Removing lib/libcurl_la-content_encoding.lo
Removing lib/libcurl_la-content_encoding.o
Removing lib/libcurl_la-cookie.lo
Removing lib/libcurl_la-cookie.o
Removing lib/libcurl_la-curl_addrinfo.lo
Removing lib/libcurl_la-curl_addrinfo.o
Removing lib/libcurl_la-curl_ctype.lo
Removing lib/libcurl_la-curl_ctype.o
Removing lib/libcurl_la-curl_des.lo
Removing lib/libcurl_la-curl_des.o
Removing lib/libcurl_la-curl_endian.lo
Removing lib/libcurl_la-curl_endian.o
Removing lib/libcurl_la-curl_fnmatch.lo
Removing lib/libcurl_la-curl_fnmatch.o
Removing lib/libcurl_la-curl_get_line.lo
Removing lib/libcurl_la-curl_get_line.o
Removing lib/libcurl_la-curl_gethostname.lo
Removing lib/libcurl_la-curl_gethostname.o
Removing lib/libcurl_la-curl_gssapi.lo
Removing lib/libcurl_la-curl_gssapi.o
Removing lib/libcurl_la-curl_memrchr.lo
Removing lib/libcurl_la-curl_memrchr.o
Removing lib/libcurl_la-curl_multibyte.lo
Removing lib/libcurl_la-curl_multibyte.o
Removing lib/libcurl_la-curl_ntlm_core.lo
Removing lib/libcurl_la-curl_ntlm_core.o
Removing lib/libcurl_la-curl_ntlm_wb.lo
Removing lib/libcurl_la-curl_ntlm_wb.o
Removing lib/libcurl_la-curl_path.lo
Removing lib/libcurl_la-curl_path.o
Removing lib/libcurl_la-curl_range.lo
Removing lib/libcurl_la-curl_range.o
Removing lib/libcurl_la-curl_rtmp.lo
Removing lib/libcurl_la-curl_rtmp.o
Removing lib/libcurl_la-curl_sasl.lo
Removing lib/libcurl_la-curl_sasl.o
Removing lib/libcurl_la-curl_sspi.lo
Removing lib/libcurl_la-curl_sspi.o
Removing lib/libcurl_la-curl_threads.lo
Removing lib/libcurl_la-curl_threads.o
Removing lib/libcurl_la-dict.lo
Removing lib/libcurl_la-dict.o
Removing lib/libcurl_la-doh.lo
Removing lib/libcurl_la-doh.o
Removing lib/libcurl_la-dotdot.lo
Removing lib/libcurl_la-dotdot.o
Removing lib/libcurl_la-dynbuf.lo
Removing lib/libcurl_la-dynbuf.o
Removing lib/libcurl_la-easy.lo
Removing lib/libcurl_la-easy.o
Removing lib/libcurl_la-easygetopt.lo
Removing lib/libcurl_la-easygetopt.o
Removing lib/libcurl_la-easyoptions.lo
Removing lib/libcurl_la-easyoptions.o
Removing lib/libcurl_la-escape.lo
Removing lib/libcurl_la-escape.o
Removing lib/libcurl_la-file.lo
Removing lib/libcurl_la-file.o
Removing lib/libcurl_la-fileinfo.lo
Removing lib/libcurl_la-fileinfo.o
Removing lib/libcurl_la-formdata.lo
Removing lib/libcurl_la-formdata.o
Removing lib/libcurl_la-ftp.lo
Removing lib/libcurl_la-ftp.o
Removing lib/libcurl_la-ftplistparser.lo
Removing lib/libcurl_la-ftplistparser.o
Removing lib/libcurl_la-getenv.lo
Removing lib/libcurl_la-getenv.o
Removing lib/libcurl_la-getinfo.lo
Removing lib/libcurl_la-getinfo.o
Removing lib/libcurl_la-gopher.lo
Removing lib/libcurl_la-gopher.o
Removing lib/libcurl_la-hash.lo
Removing lib/libcurl_la-hash.o
Removing lib/libcurl_la-hmac.lo
Removing lib/libcurl_la-hmac.o
Removing lib/libcurl_la-hostasyn.lo
Removing lib/libcurl_la-hostasyn.o
Removing lib/libcurl_la-hostcheck.lo
Removing lib/libcurl_la-hostcheck.o
Removing lib/libcurl_la-hostip.lo
Removing lib/libcurl_la-hostip.o
Removing lib/libcurl_la-hostip4.lo
Removing lib/libcurl_la-hostip4.o
Removing lib/libcurl_la-hostip6.lo
Removing lib/libcurl_la-hostip6.o
Removing lib/libcurl_la-hostsyn.lo
Removing lib/libcurl_la-hostsyn.o
Removing lib/libcurl_la-hsts.lo
Removing lib/libcurl_la-hsts.o
Removing lib/libcurl_la-http.lo
Removing lib/libcurl_la-http.o
Removing lib/libcurl_la-http2.lo
Removing lib/libcurl_la-http2.o
Removing lib/libcurl_la-http_aws_sigv4.lo
Removing lib/libcurl_la-http_aws_sigv4.o
Removing lib/libcurl_la-http_chunks.lo
Removing lib/libcurl_la-http_chunks.o
Removing lib/libcurl_la-http_digest.lo
Removing lib/libcurl_la-http_digest.o
Removing lib/libcurl_la-http_negotiate.lo
Removing lib/libcurl_la-http_negotiate.o
Removing lib/libcurl_la-http_ntlm.lo
Removing lib/libcurl_la-http_ntlm.o
Removing lib/libcurl_la-http_proxy.lo
Removing lib/libcurl_la-http_proxy.o
Removing lib/libcurl_la-idn_win32.lo
Removing lib/libcurl_la-idn_win32.o
Removing lib/libcurl_la-if2ip.lo
Removing lib/libcurl_la-if2ip.o
Removing lib/libcurl_la-imap.lo
Removing lib/libcurl_la-imap.o
Removing lib/libcurl_la-inet_ntop.lo
Removing lib/libcurl_la-inet_ntop.o
Removing lib/libcurl_la-inet_pton.lo
Removing lib/libcurl_la-inet_pton.o
Removing lib/libcurl_la-krb5.lo
Removing lib/libcurl_la-krb5.o
Removing lib/libcurl_la-ldap.lo
Removing lib/libcurl_la-ldap.o
Removing lib/libcurl_la-llist.lo
Removing lib/libcurl_la-llist.o
Removing lib/libcurl_la-md4.lo
Removing lib/libcurl_la-md4.o
Removing lib/libcurl_la-md5.lo
Removing lib/libcurl_la-md5.o
Removing lib/libcurl_la-memdebug.lo
Removing lib/libcurl_la-memdebug.o
Removing lib/libcurl_la-mime.lo
Removing lib/libcurl_la-mime.o
Removing lib/libcurl_la-mprintf.lo
Removing lib/libcurl_la-mprintf.o
Removing lib/libcurl_la-mqtt.lo
Removing lib/libcurl_la-mqtt.o
Removing lib/libcurl_la-multi.lo
Removing lib/libcurl_la-multi.o
Removing lib/libcurl_la-netrc.lo
Removing lib/libcurl_la-netrc.o
Removing lib/libcurl_la-non-ascii.lo
Removing lib/libcurl_la-non-ascii.o
Removing lib/libcurl_la-nonblock.lo
Removing lib/libcurl_la-nonblock.o
Removing lib/libcurl_la-openldap.lo
Removing lib/libcurl_la-openldap.o
Removing lib/libcurl_la-parsedate.lo
Removing lib/libcurl_la-parsedate.o
Removing lib/libcurl_la-pingpong.lo
Removing lib/libcurl_la-pingpong.o
Removing lib/libcurl_la-pop3.lo
Removing lib/libcurl_la-pop3.o
Removing lib/libcurl_la-progress.lo
Removing lib/libcurl_la-progress.o
Removing lib/libcurl_la-psl.lo
Removing lib/libcurl_la-psl.o
Removing lib/libcurl_la-rand.lo
Removing lib/libcurl_la-rand.o
Removing lib/libcurl_la-rename.lo
Removing lib/libcurl_la-rename.o
Removing lib/libcurl_la-rtsp.lo
Removing lib/libcurl_la-rtsp.o
Removing lib/libcurl_la-select.lo
Removing lib/libcurl_la-select.o
Removing lib/libcurl_la-sendf.lo
Removing lib/libcurl_la-sendf.o
Removing lib/libcurl_la-setopt.lo
Removing lib/libcurl_la-setopt.o
Removing lib/libcurl_la-sha256.lo
Removing lib/libcurl_la-sha256.o
Removing lib/libcurl_la-share.lo
Removing lib/libcurl_la-share.o
Removing lib/libcurl_la-slist.lo
Removing lib/libcurl_la-slist.o
Removing lib/libcurl_la-smb.lo
Removing lib/libcurl_la-smb.o
Removing lib/libcurl_la-smtp.lo
Removing lib/libcurl_la-smtp.o
Removing lib/libcurl_la-socketpair.lo
Removing lib/libcurl_la-socketpair.o
Removing lib/libcurl_la-socks.lo
Removing lib/libcurl_la-socks.o
Removing lib/libcurl_la-socks_gssapi.lo
Removing lib/libcurl_la-socks_gssapi.o
Removing lib/libcurl_la-socks_sspi.lo
Removing lib/libcurl_la-socks_sspi.o
Removing lib/libcurl_la-speedcheck.lo
Removing lib/libcurl_la-speedcheck.o
Removing lib/libcurl_la-splay.lo
Removing lib/libcurl_la-splay.o
Removing lib/libcurl_la-strcase.lo
Removing lib/libcurl_la-strcase.o
Removing lib/libcurl_la-strdup.lo
Removing lib/libcurl_la-strdup.o
Removing lib/libcurl_la-strerror.lo
Removing lib/libcurl_la-strerror.o
Removing lib/libcurl_la-strtok.lo
Removing lib/libcurl_la-strtok.o
Removing lib/libcurl_la-strtoofft.lo
Removing lib/libcurl_la-strtoofft.o
Removing lib/libcurl_la-system_win32.lo
Removing lib/libcurl_la-system_win32.o
Removing lib/libcurl_la-telnet.lo
Removing lib/libcurl_la-telnet.o
Removing lib/libcurl_la-tftp.lo
Removing lib/libcurl_la-tftp.o
Removing lib/libcurl_la-timeval.lo
Removing lib/libcurl_la-timeval.o
Removing lib/libcurl_la-transfer.lo
Removing lib/libcurl_la-transfer.o
Removing lib/libcurl_la-url.lo
Removing lib/libcurl_la-url.o
Removing lib/libcurl_la-urlapi.lo
Removing lib/libcurl_la-urlapi.o
Removing lib/libcurl_la-version.lo
Removing lib/libcurl_la-version.o
Removing lib/libcurl_la-version_win32.lo
Removing lib/libcurl_la-version_win32.o
Removing lib/libcurl_la-warnless.lo
Removing lib/libcurl_la-warnless.o
Removing lib/libcurl_la-wildcard.lo
Removing lib/libcurl_la-wildcard.o
Removing lib/libcurl_la-x509asn1.lo
Removing lib/libcurl_la-x509asn1.o
Removing lib/nonblock.o
Removing lib/stamp-h1
Removing lib/strtoofft.o
Removing lib/vauth/.deps/
Removing lib/vauth/.dirstamp
Removing lib/vauth/libcurl_la-cleartext.lo
Removing lib/vauth/libcurl_la-cleartext.o
Removing lib/vauth/libcurl_la-cram.lo
Removing lib/vauth/libcurl_la-cram.o
Removing lib/vauth/libcurl_la-digest.lo
Removing lib/vauth/libcurl_la-digest.o
Removing lib/vauth/libcurl_la-digest_sspi.lo
Removing lib/vauth/libcurl_la-digest_sspi.o
Removing lib/vauth/libcurl_la-gsasl.lo
Removing lib/vauth/libcurl_la-gsasl.o
Removing lib/vauth/libcurl_la-krb5_gssapi.lo
Removing lib/vauth/libcurl_la-krb5_gssapi.o
Removing lib/vauth/libcurl_la-krb5_sspi.lo
Removing lib/vauth/libcurl_la-krb5_sspi.o
Removing lib/vauth/libcurl_la-ntlm.lo
Removing lib/vauth/libcurl_la-ntlm.o
Removing lib/vauth/libcurl_la-ntlm_sspi.lo
Removing lib/vauth/libcurl_la-ntlm_sspi.o
Removing lib/vauth/libcurl_la-oauth2.lo
Removing lib/vauth/libcurl_la-oauth2.o
Removing lib/vauth/libcurl_la-spnego_gssapi.lo
Removing lib/vauth/libcurl_la-spnego_gssapi.o
Removing lib/vauth/libcurl_la-spnego_sspi.lo
Removing lib/vauth/libcurl_la-spnego_sspi.o
Removing lib/vauth/libcurl_la-vauth.lo
Removing lib/vauth/libcurl_la-vauth.o
Removing lib/version_win32.o
Removing lib/vquic/.deps/
Removing lib/vquic/.dirstamp
Removing lib/vquic/libcurl_la-ngtcp2.lo
Removing lib/vquic/libcurl_la-ngtcp2.o
Removing lib/vquic/libcurl_la-quiche.lo
Removing lib/vquic/libcurl_la-quiche.o
Removing lib/vquic/libcurl_la-vquic.lo
Removing lib/vquic/libcurl_la-vquic.o
Removing lib/vssh/.deps/
Removing lib/vssh/.dirstamp
Removing lib/vssh/libcurl_la-libssh.lo
Removing lib/vssh/libcurl_la-libssh.o
Removing lib/vssh/libcurl_la-libssh2.lo
Removing lib/vssh/libcurl_la-libssh2.o
Removing lib/vssh/libcurl_la-wolfssh.lo
Removing lib/vssh/libcurl_la-wolfssh.o
Removing lib/vtls/.deps/
Removing lib/vtls/.dirstamp
Removing lib/vtls/libcurl_la-bearssl.lo
Removing lib/vtls/libcurl_la-bearssl.o
Removing lib/vtls/libcurl_la-gskit.lo
Removing lib/vtls/libcurl_la-gskit.o
Removing lib/vtls/libcurl_la-gtls.lo
Removing lib/vtls/libcurl_la-gtls.o
Removing lib/vtls/libcurl_la-keylog.lo
Removing lib/vtls/libcurl_la-keylog.o
Removing lib/vtls/libcurl_la-mbedtls.lo
Removing lib/vtls/libcurl_la-mbedtls.o
Removing lib/vtls/libcurl_la-mbedtls_threadlock.lo
Removing lib/vtls/libcurl_la-mbedtls_threadlock.o
Removing lib/vtls/libcurl_la-mesalink.lo
Removing lib/vtls/libcurl_la-mesalink.o
Removing lib/vtls/libcurl_la-nss.lo
Removing lib/vtls/libcurl_la-nss.o
Removing lib/vtls/libcurl_la-openssl.lo
Removing lib/vtls/libcurl_la-openssl.o
Removing lib/vtls/libcurl_la-rustls.lo
Removing lib/vtls/libcurl_la-rustls.o
Removing lib/vtls/libcurl_la-schannel.lo
Removing lib/vtls/libcurl_la-schannel.o
Removing lib/vtls/libcurl_la-schannel_verify.lo
Removing lib/vtls/libcurl_la-schannel_verify.o
Removing lib/vtls/libcurl_la-sectransp.lo
Removing lib/vtls/libcurl_la-sectransp.o
Removing lib/vtls/libcurl_la-vtls.lo
Removing lib/vtls/libcurl_la-vtls.o
Removing lib/vtls/libcurl_la-wolfssl.lo
Removing lib/vtls/libcurl_la-wolfssl.o
Removing lib/warnless.o
Removing libcurl.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing packages/Makefile
Removing packages/Makefile.in
Removing packages/vms/Makefile
Removing packages/vms/Makefile.in
Removing scripts/Makefile
Removing scripts/Makefile.in
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/curl
Removing src/slist_wc.o
Removing src/tool_binmode.o
Removing src/tool_bname.o
Removing src/tool_cb_dbg.o
Removing src/tool_cb_hdr.o
Removing src/tool_cb_prg.o
Removing src/tool_cb_rea.o
Removing src/tool_cb_see.o
Removing src/tool_cb_wrt.o
Removing src/tool_cfgable.o
Removing src/tool_convert.o
Removing src/tool_dirhie.o
Removing src/tool_doswin.o
Removing src/tool_easysrc.o
Removing src/tool_filetime.o
Removing src/tool_formparse.o
Removing src/tool_getparam.o
Removing src/tool_getpass.o
Removing src/tool_help.o
Removing src/tool_helpers.o
Removing src/tool_homedir.o
Removing src/tool_hugehelp.c
Removing src/tool_hugehelp.o
Removing src/tool_libinfo.o
Removing src/tool_listhelp.o
Removing src/tool_main.o
Removing src/tool_msgs.o
Removing src/tool_operate.o
Removing src/tool_operhlp.o
Removing src/tool_panykey.o
Removing src/tool_paramhlp.o
Removing src/tool_parsecfg.o
Removing src/tool_progress.o
Removing src/tool_setopt.o
Removing src/tool_sleep.o
Removing src/tool_strdup.o
Removing src/tool_urlglob.o
Removing src/tool_util.o
Removing src/tool_vms.o
Removing src/tool_writeout.o
Removing src/tool_writeout_json.o
Removing src/tool_xattr.o
Removing test-driver
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/certs/Makefile
Removing tests/certs/Makefile.in
Removing tests/certs/scripts/Makefile
Removing tests/certs/scripts/Makefile.in
Removing tests/configurehelp.pm
Removing tests/data/Makefile
Removing tests/data/Makefile.in
Removing tests/libtest/.deps/
Removing tests/libtest/Makefile
Removing tests/libtest/Makefile.in
Removing tests/server/.deps/
Removing tests/server/Makefile
Removing tests/server/Makefile.in
Removing tests/unit/.deps/
Removing tests/unit/Makefile
Removing tests/unit/Makefile.in

$ autoreconf -fi
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Remember to add 'LT_INIT' to configure.ac.
configure.ac:120: installing './compile'
configure.ac:311: installing './config.guess'
configure.ac:311: installing './config.sub'
configure.ac:120: installing './install-sh'
configure.ac:125: installing './missing'
docs/examples/Makefile.am: installing './depcomp'
parallel-tests: installing './test-driver'

$ bash -c find . -name config.guess -exec cp /usr/share/misc/config.guess {} \;

$ bash -c find . -name config.sub -exec cp /usr/share/misc/config.sub {} \;

$ chmod +x configure

$ ./configure --disable-shared --without-ssl --disable-docs
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable ECH support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... ccache gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether ccache gcc accepts -g... yes
checking for ccache gcc option to enable C11 features... none needed
checking whether ccache gcc understands -c and -o together... yes
checking how to run the C preprocessor... ccache gcc -E
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of ccache gcc... gcc3
checking curl version... 7.81.0-DEV
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defined... no
checking if _THREAD_SAFE is actually needed... no
checking if _THREAD_SAFE is onwards defined... no
checking if _REENTRANT is already defined... no
checking if _REENTRANT is actually needed... no
checking if _REENTRANT is onwards defined... no
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking how to print strings... printf
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for fgrep... /usr/bin/grep -F
checking for ld used by ccache gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from ccache gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if ccache gcc supports -fno-rtti -fno-exceptions... no
checking for ccache gcc option to produce PIC... -fPIC -DPIC
checking if ccache gcc PIC flag -fPIC -DPIC works... yes
checking if ccache gcc static flag -static works... yes
checking if ccache gcc supports -c -o file.o... yes
checking if ccache gcc supports -c -o file.o... (cached) yes
checking whether the ccache gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether to build shared libraries with -version-info... yes
checking whether to build shared libraries with -no-undefined... no
checking whether to build shared libraries with -mimpure-text... no
checking whether to build shared libraries with PIC... yes
checking whether to build static libraries with PIC... yes
checking whether to build shared libraries only... no
checking whether to build static libraries only... yes
checking for inline... inline
checking if cpp -P is needed... yes
checking if cpp -P works... yes
checking if compiler is DEC/Compaq/HP C... no
checking if compiler is HP-UX C... no
checking if compiler is IBM C... no
checking if compiler is Intel C... no
checking if compiler is clang... no
checking if compiler is GNU C... yes
checking if compiler is LCC... no
checking if compiler is SGI MIPSpro C... no
checking if compiler is SGI MIPS C... no
checking if compiler is SunPro C... no
checking if compiler is Tiny C... no
checking if compiler is Watcom C... no
checking if compiler accepts some basic options... yes
configure: compiler options added: -Werror-implicit-function-declaration
checking if compiler optimizer assumed setting might be used... yes
checking if compiler accepts optimizer enabling options... yes
configure: compiler options added: -O2
checking if compiler accepts strict warning options... yes
configure: compiler options added: -Wno-system-headers -Wenum-conversion
checking if compiler halts on compilation errors... yes
checking if compiler halts on negative sized arrays... yes
checking if compiler halts on function prototype mismatch... yes
checking if compiler supports hiding library internal symbols... yes
checking for windows.h... no
checking whether build target is a native Windows one... no
checking whether build target supports WIN32 file API... no
checking whether build target supports WIN32 crypto API... no
checking for good-to-use Darwin CFLAGS... no
checking whether to link macOS CoreFoundation and SystemConfiguration framework... no
checking to see if the compiler supports __builtin_available()... no
checking whether to support http... yes
checking whether to support ftp... yes
checking whether to support file... yes
checking whether to support ldap... yes
checking whether to support ldaps... yes
checking whether to support rtsp... yes
checking whether to support proxies... yes
checking whether to support dict... yes
checking whether to support telnet... yes
checking whether to support tftp... yes
checking whether to support pop3... yes
checking whether to support imap... yes
checking whether to support smb... yes
checking whether to support smtp... yes
checking whether to support gopher... yes
checking whether to support mqtt... no
checking whether to provide built-in manual... yes
checking whether to enable generation of C code... yes
checking whether to use libgcc... no
checking if X/Open network library is required... no
checking for gethostbyname... yes
checking for windows.h... (cached) no
checking for winsock2.h... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for pkg-config... /usr/bin/pkg-config
checking for zlib options with pkg-config... found
checking for zlib.h... yes
configure: found both libz and libz.h header
checking for BrotliDecoderDecompress in -lbrotlidec... no
checking for brotli/decode.h... no
checking for ZSTD_createDStream in -lzstd... no
checking for zstd.h... no
checking for lber.h... no
checking for ldap.h... no
checking for ldapssl.h... no
checking for ldap_ssl.h... no
checking for LDAP libraries... cannot find LDAP libraries
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... yes
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Secure Transport... no
checking whether to enable Amiga native SSL/TLS (AmiSSL)... no
checking for library containing psl_builtin... -lpsl
checking for library containing gsasl_init... no
checking for RTMP_Init in -lrtmp... no
checking whether versioned symbols are wanted... no
checking whether to enable Windows native IDN (Windows native builds only)... no
checking whether to build with libidn2... (assumed) yes
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libidn2 options with pkg-config... no
configure: IDN_LIBS: "-lidn2"
configure: IDN_LDFLAGS: ""
configure: IDN_CPPFLAGS: ""
configure: IDN_DIR: ""
checking if idn2_lookup_ul can be linked... no
checking for idn2.h... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libnghttp2 options with pkg-config... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libngtcp2 options with pkg-config... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for fish options with pkg-config... no
checking for malloc.h... yes
checking for memory.h... no
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for sys/select.h... yes
checking for sys/socket.h... yes
checking for sys/ioctl.h... yes
checking for sys/uio.h... yes
checking for assert.h... yes
checking for unistd.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for arpa/inet.h... yes
checking for net/if.h... yes
checking for netinet/in.h... yes
checking for netinet/in6.h... no
checking for sys/un.h... yes
checking for linux/tcp.h... yes
checking for netinet/tcp.h... yes
checking for netdb.h... yes
checking for sys/sockio.h... no
checking for sys/stat.h... (cached) yes
checking for sys/param.h... yes
checking for termios.h... yes
checking for termio.h... yes
checking for fcntl.h... yes
checking for alloca.h... yes
checking for io.h... no
checking for pwd.h... yes
checking for utime.h... yes
checking for sys/utime.h... no
checking for sys/poll.h... yes
checking for poll.h... yes
checking for socket.h... no
checking for sys/resource.h... yes
checking for libgen.h... yes
checking for locale.h... yes
checking for errno.h... yes
checking for stdbool.h... yes
checking for arpa/tftp.h... yes
checking for sys/filio.h... no
checking for sys/wait.h... yes
checking for setjmp.h... yes
checking for an ANSI C-conforming const... yes
checking for compiler support of C99 variadic macro style... yes
checking for compiler support of old gcc variadic macro style... yes
checking for size_t... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for struct timeval... yes
checking run-time libs availability... fine
checking size of size_t... 8
checking size of long... 8
checking size of int... 4
checking size of short... 2
checking size of time_t... 8
checking size of off_t... 8
checking size of curl_off_t... 8
checking for long long... yes
checking if numberLL works... yes
checking for ssize_t... yes
checking for bool... yes
checking for sa_family_t... yes
checking for suseconds_t... yes
checking if time_t is unsigned... no
checking for sys/types.h... (cached) yes
checking for poll.h... (cached) yes
checking for sys/poll.h... (cached) yes
checking for in_addr_t... yes
checking for struct sockaddr_storage... yes
checking for sys/select.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for select... yes
checking types of args and return type for select... int,fd_set *,struct timeval *,int
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for recv... yes
checking types of args and return type for recv... int,void *,size_t,int,ssize_t
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for send... yes
checking types of args and return type for send... int,const void *,size_t,int,ssize_t
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for MSG_NOSIGNAL... yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking if alarm can be linked... yes
checking if alarm is prototyped... yes
checking if alarm is compilable... yes
checking if alarm usage allowed... yes
checking if alarm might be used... yes
checking for sys/types.h... (cached) yes
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
checking for sys/types.h... (cached) yes
checking for libgen.h... (cached) yes
checking if basename can be linked... yes
checking if basename is prototyped... yes
checking if basename is compilable... yes
checking if basename usage allowed... yes
checking if basename might be used... yes
checking for sys/types.h... (cached) yes
checking for socket.h... (cached) no
checking if closesocket can be linked... no
checking if closesocket might be used... no
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking if CloseSocket can be linked... no
checking if CloseSocket might be used... no
checking if connect can be linked... yes
checking if connect is prototyped... yes
checking if connect is compilable... yes
checking if connect usage allowed... yes
checking if connect might be used... yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking for fcntl.h... (cached) yes
checking if fcntl can be linked... yes
checking if fcntl is prototyped... yes
checking if fcntl is compilable... yes
checking if fcntl usage allowed... yes
checking if fcntl might be used... yes
checking if fcntl O_NONBLOCK is compilable... yes
checking if fcntl O_NONBLOCK usage allowed... yes
checking if fcntl O_NONBLOCK might be used... yes
checking for windows.h... (cached) no
checking for winsock2.h... (cached) no
checking for ws2tcpip.h... (cached) no
checking for sys/types.h... (cached) yes
checking for netdb.h... (cached) yes
checking if freeaddrinfo can be linked... yes
checking if freeaddrinfo is prototyped... yes
checking if freeaddrinfo is compilable... yes
checking if freeaddrinfo usage allowed... yes
checking if freeaddrinfo might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/xattr.h... yes
checking if fsetxattr can be linked... yes
checking if fsetxattr is prototyped... yes
checking if fsetxattr takes 5 args.... yes
checking if fsetxattr is compilable... yes
checking if fsetxattr usage allowed... yes
checking if fsetxattr might be used... yes
checking if ftruncate can be linked... yes
checking if ftruncate is prototyped... yes
checking if ftruncate is compilable... yes
checking if ftruncate usage allowed... yes
checking if ftruncate might be used... yes
checking for sys/types.h... (cached) yes
checking for stdlib.h... (cached) yes
checking if getaddrinfo can be linked... yes
checking if getaddrinfo is prototyped... yes
checking if getaddrinfo is compilable... yes
checking if getaddrinfo seems to work... yes
checking if getaddrinfo usage allowed... yes
checking if getaddrinfo might be used... yes
checking if getaddrinfo is threadsafe... yes
checking if gethostbyname can be linked... yes
checking if gethostbyname is prototyped... yes
checking if gethostbyname is compilable... yes
checking if gethostbyname usage allowed... yes
checking if gethostbyname might be used... yes
checking if gethostbyname_r can be linked... yes
checking if gethostbyname_r is prototyped... yes
checking if gethostbyname_r takes 3 args.... no
checking if gethostbyname_r takes 5 args.... no
checking if gethostbyname_r takes 6 args.... yes
checking if gethostbyname_r is compilable... yes
checking if gethostbyname_r usage allowed... yes
checking if gethostbyname_r might be used... yes
checking if gethostname can be linked... yes
checking if gethostname is prototyped... yes
checking if gethostname is compilable... yes
checking for gethostname arg 2 data type... size_t
checking if gethostname usage allowed... yes
checking if gethostname might be used... yes
checking if getpeername can be linked... yes
checking if getpeername is prototyped... yes
checking if getpeername is compilable... yes
checking if getpeername usage allowed... yes
checking if getpeername might be used... yes
checking if getsockname can be linked... yes
checking if getsockname is prototyped... yes
checking if getsockname is compilable... yes
checking if getsockname usage allowed... yes
checking if getsockname might be used... yes
checking for net/if.h... (cached) yes
checking if if_nametoindex can be linked... yes
checking if if_nametoindex is prototyped... yes
checking if if_nametoindex is compilable... yes
checking if if_nametoindex usage allowed... yes
checking if if_nametoindex might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for netinet/in.h... (cached) yes
checking for ifaddrs.h... yes
checking if getifaddrs can be linked... yes
checking if getifaddrs is prototyped... yes
checking if getifaddrs is compilable... yes
checking if getifaddrs seems to work... yes
checking if getifaddrs usage allowed... yes
checking if getifaddrs might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking if gmtime_r can be linked... yes
checking if gmtime_r is prototyped... yes
checking if gmtime_r is compilable... yes
checking if gmtime_r seems to work... yes
checking if gmtime_r usage allowed... yes
checking if gmtime_r might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for netinet/in.h... (cached) yes
checking for arpa/inet.h... (cached) yes
checking if inet_ntop can be linked... yes
checking if inet_ntop is prototyped... yes
checking if inet_ntop is compilable... yes
checking if inet_ntop seems to work... yes
checking if inet_ntop usage allowed... yes
checking if inet_ntop might be used... yes
checking if inet_pton can be linked... yes
checking if inet_pton is prototyped... yes
checking if inet_pton is compilable... yes
checking if inet_pton seems to work... yes
checking if inet_pton usage allowed... yes
checking if inet_pton might be used... yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for sys/ioctl.h... (cached) yes
checking for stropts.h... no
checking if ioctl can be linked... yes
checking if ioctl is prototyped... yes
checking if ioctl is compilable... yes
checking if ioctl usage allowed... yes
checking if ioctl might be used... yes
checking if ioctl FIONBIO is compilable... yes
checking if ioctl FIONBIO usage allowed... yes
checking if ioctl FIONBIO might be used... yes
checking if ioctl SIOCGIFADDR is compilable... yes
checking if ioctl SIOCGIFADDR usage allowed... yes
checking if ioctl SIOCGIFADDR might be used... yes
checking if ioctlsocket can be linked... no
checking if ioctlsocket might be used... no
checking if IoctlSocket can be linked... no
checking if IoctlSocket might be used... no
checking if localtime_r can be linked... yes
checking if localtime_r is prototyped... yes
checking if localtime_r is compilable... yes
checking if localtime_r seems to work... yes
checking if localtime_r usage allowed... yes
checking if localtime_r might be used... yes
checking if memrchr can be linked... yes
checking if memrchr is prototyped... no
checking if memrchr might be used... no
checking if poll can be linked... yes
checking if poll is prototyped... yes
checking if poll is compilable... yes
checking if poll seems to work... yes
checking if poll usage allowed... yes
checking if poll might be used... yes
checking if setsockopt can be linked... yes
checking if setsockopt is prototyped... yes
checking if setsockopt is compilable... yes
checking if setsockopt usage allowed... yes
checking if setsockopt might be used... yes
checking if setsockopt SO_NONBLOCK is compilable... no
checking if setsockopt SO_NONBLOCK might be used... no
checking for sys/types.h... (cached) yes
checking for signal.h... yes
checking if sigaction can be linked... yes
checking if sigaction is prototyped... yes
checking if sigaction is compilable... yes
checking if sigaction usage allowed... yes
checking if sigaction might be used... yes
checking if siginterrupt can be linked... yes
checking if siginterrupt is prototyped... yes
checking if siginterrupt is compilable... yes
checking if siginterrupt usage allowed... yes
checking if siginterrupt might be used... yes
checking if signal can be linked... yes
checking if signal is prototyped... yes
checking if signal is compilable... yes
checking if signal usage allowed... yes
checking if signal might be used... yes
checking for sys/types.h... (cached) yes
checking for setjmp.h... (cached) yes
checking if sigsetjmp can be linked... no
checking if sigsetjmp seems a macro... yes
checking if sigsetjmp is compilable... yes
checking if sigsetjmp usage allowed... yes
checking if sigsetjmp might be used... yes
checking if socket can be linked... yes
checking if socket is prototyped... yes
checking if socket is compilable... yes
checking if socket usage allowed... yes
checking if socket might be used... yes
checking if socketpair can be linked... yes
checking if socketpair is prototyped... yes
checking if socketpair is compilable... yes
checking if socketpair usage allowed... yes
checking if socketpair might be used... yes
checking if strcasecmp can be linked... yes
checking if strcasecmp is prototyped... yes
checking if strcasecmp is compilable... yes
checking if strcasecmp usage allowed... yes
checking if strcasecmp might be used... yes
checking if strcmpi can be linked... no
checking if strcmpi might be used... no
checking if strdup can be linked... yes
checking if strdup is prototyped... yes
checking if strdup is compilable... yes
checking if strdup usage allowed... yes
checking if strdup might be used... yes
checking if strerror_r can be linked... yes
checking if strerror_r is prototyped... yes
checking if strerror_r is compilable... yes
checking if strerror_r is glibc like... no
checking if strerror_r is POSIX like... yes
checking if strerror_r seems to work... yes
checking if strerror_r usage allowed... yes
checking if strerror_r might be used... yes
checking if stricmp can be linked... no
checking if stricmp might be used... no
checking if strncmpi can be linked... no
checking if strncmpi might be used... no
checking if strnicmp can be linked... no
checking if strnicmp might be used... no
checking if strstr can be linked... yes
checking if strstr is prototyped... yes
checking if strstr is compilable... yes
checking if strstr usage allowed... yes
checking if strstr might be used... yes
checking if strtok_r can be linked... yes
checking if strtok_r is prototyped... yes
checking if strtok_r is compilable... yes
checking if strtok_r usage allowed... yes
checking if strtok_r might be used... yes
checking if strtoll can be linked... yes
checking if strtoll is prototyped... yes
checking if strtoll is compilable... yes
checking if strtoll usage allowed... yes
checking if strtoll might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/uio.h... (cached) yes
checking if writev can be linked... yes
checking if writev is prototyped... yes
checking if writev is compilable... yes
checking if writev usage allowed... yes
checking if writev might be used... yes
checking for ccache gcc options needed to detect all undeclared functions... none needed
checking whether getpwuid_r is declared... yes
checking for fnmatch... yes
checking for geteuid... yes
checking for getpass_r... no
checking deeper for getpass_r... but still no
checking for getppid... yes
checking for getpwuid... yes
checking for getpwuid_r... yes
checking for getrlimit... yes
checking for gettimeofday... yes
checking for if_nametoindex... yes
checking for mach_absolute_time... no
checking deeper for mach_absolute_time... but still no
checking for pipe... yes
checking for setlocale... yes
checking for setmode... no
checking deeper for setmode... but still no
checking for setrlimit... yes
checking for usleep... yes
checking for utime... yes
checking for utimes... yes
checking how to set a socket into non-blocking mode... fcntl O_NONBLOCK
checking for perl... /usr/bin/perl
checking for gnroff... no
checking for nroff... /usr/bin/nroff
checking how to use *nroff to get plain text from man pages... -man
checking whether to enable the threaded resolver... yes
checking whether to use POSIX threads for threaded resolver... auto
checking for pthread.h... yes
checking for pthread_create... yes
checking convert -I options to -isystem... yes
checking whether to enable verbose strings... yes
checking whether to enable SSPI support (Windows native builds only)... no
checking whether to enable cryptographic authentication methods... yes
checking whether to support NTLM... yes
checking whether to enable NTLM delegation to winbind's helper... no
checking whether to enable TLS-SRP authentication... yes
checking whether to enable Unix domain sockets... auto
checking for struct sockaddr_un.sun_path... yes
checking whether to support cookies... yes
checking whether to support socketpair... yes
checking whether to support HTTP authentication... yes
checking whether to support DoH... yes
checking whether to support the MIME API... yes
checking whether to support date parsing... yes
checking whether to support netrc parsing... yes
checking whether to support progress-meter... yes
checking whether to support DNS shuffling... yes
checking whether to support curl_easy_option*... yes
checking whether to support alt-svc... no
configure: disables HSTS due to lack of SSL
checking whether hiding of library internal symbols will actually happen... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating docs/Makefile
config.status: creating docs/examples/Makefile
config.status: creating docs/libcurl/Makefile
config.status: creating docs/libcurl/opts/Makefile
config.status: creating docs/cmdline-opts/Makefile
config.status: creating include/Makefile
config.status: creating include/curl/Makefile
config.status: creating src/Makefile
config.status: creating lib/Makefile
config.status: creating scripts/Makefile
config.status: creating lib/libcurl.vers
config.status: creating tests/Makefile
config.status: creating tests/certs/Makefile
config.status: creating tests/certs/scripts/Makefile
config.status: creating tests/data/Makefile
config.status: creating tests/server/Makefile
config.status: creating tests/libtest/Makefile
config.status: creating tests/unit/Makefile
config.status: creating packages/Makefile
config.status: creating packages/vms/Makefile
config.status: creating curl-config
config.status: creating libcurl.pc
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: amending lib/Makefile
configure: amending src/Makefile
configure: amending tests/unit/Makefile
configure: amending tests/server/Makefile
configure: amending tests/libtest/Makefile
configure: amending docs/examples/Makefile
configure: Configured to build curl/libcurl:

Host setup: x86_64-pc-linux-gnu
Install prefix: /usr/local
Compiler: ccache gcc
CFLAGS: -Werror-implicit-function-declaration -O2 -Wno-system-headers -Wenum-conversion
CPPFLAGS:
LDFLAGS:
LIBS: -lpsl -lz

curl version: 7.81.0-DEV
SSL: no (--with-{openssl,gnutls,nss,mbedtls,wolfssl,schannel,secure-transport,mesalink,amissl,bearssl,rustls} )
SSH: no (--with-{libssh,libssh2})
zlib: enabled
brotli: no (--with-brotli)
zstd: no (--with-zstd)
GSS-API: no (--with-gssapi)
GSASL: no (libgsasl not found)
TLS-SRP: no (--enable-tls-srp)
resolver: POSIX threaded
IPv6: enabled
Unix sockets: enabled
IDN: no (--with-{libidn2,winidn})
Build libcurl: Shared=no, Static=yes
Built-in manual: enabled
--libcurl option: enabled (--disable-libcurl-option)
Verbose errors: enabled (--disable-verbose)
Code coverage: disabled
SSPI: no (--enable-sspi)
ca cert bundle: no
ca cert path:
ca fallback:
LDAP: no (--enable-ldap / --with-ldap-lib / --with-lber-lib)
LDAPS: no (--enable-ldaps)
RTSP: enabled
RTMP: no (--with-librtmp)
PSL: enabled
Alt-svc: enabled (--disable-alt-svc)
HSTS: no (--enable-hsts)
HTTP1: enabled (internal)
HTTP2: no (--with-nghttp2, --with-hyper)
HTTP3: no (--with-ngtcp2, --with-quiche)
ECH: no (--enable-ech)
Protocols: DICT FILE FTP GOPHER HTTP IMAP MQTT POP3 RTSP SMTP TELNET TFTP
Features: AsynchDNS IPv6 Largefile PSL UnixSockets alt-svc libz

configure: WARNING: Cannot find libraries for LDAP support: LDAP disabled
configure: WARNING: SSL disabled, you will not be able to use HTTPS, FTPS, NTLM and more.
configure: WARNING: Use --with-openssl, --with-gnutls, --with-wolfssl, --with-mbedtls, --with-nss, --with-schannel, --with-secure-transport, --with-mesalink, --with-amissl, --with-bearssl or --with-rustls to address this.
configure: WARNING: libgsasl was not found
configure: WARNING: Cannot find libraries for IDN support: IDN disabled

$ make -j3
Making all in lib
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
make all-am
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
CC libcurl_la-altsvc.lo
CC libcurl_la-amigaos.lo
CC libcurl_la-asyn-ares.lo
CC libcurl_la-asyn-thread.lo
CC libcurl_la-base64.lo
CC libcurl_la-bufref.lo
CC libcurl_la-c-hyper.lo
CC libcurl_la-conncache.lo
CC libcurl_la-connect.lo
CC libcurl_la-cookie.lo
CC libcurl_la-content_encoding.lo
CC libcurl_la-curl_addrinfo.lo
CC libcurl_la-curl_ctype.lo
CC libcurl_la-curl_des.lo
CC libcurl_la-curl_endian.lo
CC libcurl_la-curl_get_line.lo
CC libcurl_la-curl_fnmatch.lo
CC libcurl_la-curl_gethostname.lo
CC libcurl_la-curl_gssapi.lo
CC libcurl_la-curl_memrchr.lo
CC libcurl_la-curl_multibyte.lo
CC libcurl_la-curl_ntlm_core.lo
CC libcurl_la-curl_ntlm_wb.lo
CC libcurl_la-curl_path.lo
CC libcurl_la-curl_range.lo
CC libcurl_la-curl_rtmp.lo
CC libcurl_la-curl_sasl.lo
CC libcurl_la-curl_sspi.lo
CC libcurl_la-curl_threads.lo
CC libcurl_la-dict.lo
CC libcurl_la-doh.lo
CC libcurl_la-dotdot.lo
CC libcurl_la-dynbuf.lo
CC libcurl_la-easy.lo
CC libcurl_la-easygetopt.lo
CC libcurl_la-easyoptions.lo
CC libcurl_la-escape.lo
CC libcurl_la-file.lo
CC libcurl_la-fileinfo.lo
CC libcurl_la-formdata.lo
CC libcurl_la-ftplistparser.lo
CC libcurl_la-ftp.lo
CC libcurl_la-getenv.lo
CC libcurl_la-getinfo.lo
CC libcurl_la-gopher.lo
CC libcurl_la-hash.lo
CC libcurl_la-hmac.lo
CC libcurl_la-hostasyn.lo
CC libcurl_la-hostcheck.lo
CC libcurl_la-hostip.lo
CC libcurl_la-hostip4.lo
CC libcurl_la-hostsyn.lo
CC libcurl_la-hostip6.lo
CC libcurl_la-hsts.lo
CC libcurl_la-http.lo
CC libcurl_la-http2.lo
CC libcurl_la-http_chunks.lo
CC libcurl_la-http_digest.lo
CC libcurl_la-http_negotiate.lo
CC libcurl_la-http_ntlm.lo
CC libcurl_la-http_proxy.lo
CC libcurl_la-http_aws_sigv4.lo
CC libcurl_la-idn_win32.lo
CC libcurl_la-if2ip.lo
CC libcurl_la-imap.lo
CC libcurl_la-inet_ntop.lo
CC libcurl_la-inet_pton.lo
CC libcurl_la-krb5.lo
CC libcurl_la-ldap.lo
CC libcurl_la-llist.lo
CC libcurl_la-md4.lo
CC libcurl_la-md5.lo
CC libcurl_la-memdebug.lo
CC libcurl_la-mime.lo
CC libcurl_la-mprintf.lo
CC libcurl_la-mqtt.lo
CC libcurl_la-multi.lo
CC libcurl_la-netrc.lo
CC libcurl_la-non-ascii.lo
CC libcurl_la-nonblock.lo
CC libcurl_la-openldap.lo
CC libcurl_la-parsedate.lo
CC libcurl_la-pingpong.lo
CC libcurl_la-pop3.lo
CC libcurl_la-progress.lo
CC libcurl_la-psl.lo
CC libcurl_la-rand.lo
CC libcurl_la-rename.lo
CC libcurl_la-rtsp.lo
CC libcurl_la-select.lo
CC libcurl_la-sendf.lo
CC libcurl_la-setopt.lo
CC libcurl_la-sha256.lo
CC libcurl_la-share.lo
CC libcurl_la-slist.lo
CC libcurl_la-smb.lo
CC libcurl_la-smtp.lo
CC libcurl_la-socketpair.lo
CC libcurl_la-socks.lo
CC libcurl_la-socks_gssapi.lo
CC libcurl_la-socks_sspi.lo
CC libcurl_la-speedcheck.lo
CC libcurl_la-splay.lo
CC libcurl_la-strcase.lo
CC libcurl_la-strdup.lo
CC libcurl_la-strerror.lo
CC libcurl_la-strtok.lo
CC libcurl_la-strtoofft.lo
CC libcurl_la-system_win32.lo
CC libcurl_la-telnet.lo
CC libcurl_la-tftp.lo
CC libcurl_la-timeval.lo
CC libcurl_la-transfer.lo
CC libcurl_la-url.lo
CC libcurl_la-urlapi.lo
CC libcurl_la-version.lo
CC libcurl_la-version_win32.lo
CC libcurl_la-warnless.lo
CC libcurl_la-wildcard.lo
CC libcurl_la-x509asn1.lo
CC vauth/libcurl_la-cleartext.lo
CC vauth/libcurl_la-cram.lo
CC vauth/libcurl_la-digest.lo
CC vauth/libcurl_la-digest_sspi.lo
CC vauth/libcurl_la-gsasl.lo
CC vauth/libcurl_la-krb5_gssapi.lo
CC vauth/libcurl_la-krb5_sspi.lo
CC vauth/libcurl_la-ntlm.lo
CC vauth/libcurl_la-ntlm_sspi.lo
CC vauth/libcurl_la-oauth2.lo
CC vauth/libcurl_la-spnego_gssapi.lo
CC vauth/libcurl_la-spnego_sspi.lo
CC vauth/libcurl_la-vauth.lo
CC vtls/libcurl_la-bearssl.lo
CC vtls/libcurl_la-gskit.lo
CC vtls/libcurl_la-gtls.lo
CC vtls/libcurl_la-keylog.lo
CC vtls/libcurl_la-mbedtls.lo
CC vtls/libcurl_la-mbedtls_threadlock.lo
CC vtls/libcurl_la-mesalink.lo
CC vtls/libcurl_la-nss.lo
CC vtls/libcurl_la-openssl.lo
CC vtls/libcurl_la-rustls.lo
CC vtls/libcurl_la-schannel.lo
CC vtls/libcurl_la-schannel_verify.lo
CC vtls/libcurl_la-sectransp.lo
CC vtls/libcurl_la-vtls.lo
CC vtls/libcurl_la-wolfssl.lo
CC vquic/libcurl_la-ngtcp2.lo
CC vquic/libcurl_la-quiche.lo
CC vquic/libcurl_la-vquic.lo
CC vssh/libcurl_la-libssh.lo
CC vssh/libcurl_la-libssh2.lo
CC vssh/libcurl_la-wolfssh.lo
CCLD libcurl.la
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
Making all in src
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/src'
Making all in ../docs
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
Making all in .
make[3]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
if test "..x" != "..x" -a -e "./curl.1"; then \
/usr/bin/install -c -m 644 "./curl.1" /root/asi_db/builds/curl/_worktrees/w0/docs/curl.1; fi
cd cmdline-opts && make
make[4]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
generate ../../docs/curl.1
make[4]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
make[3]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
Making all in cmdline-opts
make[3]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/src'
CC slist_wc.o
CC tool_binmode.o
CC tool_bname.o
CC tool_cb_dbg.o
CC tool_cb_hdr.o
CC tool_cb_prg.o
CC tool_cb_see.o
CC tool_cb_rea.o
CC tool_cb_wrt.o
CC tool_cfgable.o
CC tool_convert.o
CC tool_dirhie.o
CC tool_easysrc.o
CC tool_doswin.o
CC tool_filetime.o
CC tool_formparse.o
CC tool_getparam.o
CC tool_getpass.o
CC tool_help.o
CC tool_helpers.o
CC tool_homedir.o
CC tool_libinfo.o
HUGE tool_hugehelp.c
CC tool_listhelp.o
CC tool_main.o
CC tool_msgs.o
CC tool_operate.o
CC tool_operhlp.o
CC tool_panykey.o
CC tool_paramhlp.o
CC tool_parsecfg.o
CC tool_progress.o
CC tool_strdup.o
CC tool_setopt.o
CC tool_sleep.o
CC tool_urlglob.o
CC tool_util.o
CC tool_vms.o
CC tool_writeout.o
CC tool_writeout_json.o
CC tool_xattr.o
CC ../lib/nonblock.o
CC ../lib/strtoofft.o
CC ../lib/warnless.o
CC ../lib/curl_ctype.o
CC ../lib/version_win32.o
CC ../lib/curl_multibyte.o
CC ../lib/dynbuf.o
CC tool_hugehelp.o
CCLD curl
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/src'
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/src'
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0'

Commit Diff GitHub →

docs/cmdline-opts/abstract-unix-socket.d+1 -0

@@ -4,6 +4,7 @@ Help: Connect via abstract Unix domain socket
	Added: 7.53.0
	Protocols: HTTP
	Category: connection
+	See-also: unix-socket
	Example: --abstract-unix-socket socketpath $URL
	---
	Connect through an abstract Unix domain socket, instead of using the network.

docs/cmdline-opts/alt-svc.d+1 -0

@@ -4,6 +4,7 @@ Protocols: HTTPS
	Help: Enable alt-svc with this cache file
	Added: 7.64.1
	Category: http
+	See-also: resolve connect-to
	Example: --alt-svc svc.txt $URL
	---
	This option enables the alt-svc parser in curl. If the file name points to an

docs/cmdline-opts/append.d+1 -0

@@ -3,6 +3,7 @@ Long: append
	Help: Append to target file when uploading
	Protocols: FTP SFTP
	Category: ftp sftp
+	See-also: range continue-at
	Example: --upload-file local --append ftp://example.com/
	Added: 4.8
	---

docs/cmdline-opts/aws-sigv4.d+1 -0

@@ -3,6 +3,7 @@ Arg: <provider1[:provider2[:region[:service]]]>
	Help: Use AWS V4 signature authentication
	Category: auth http
	Added: 7.75.0
+	See-also: basic user
	Example: --aws-sigv4 "aws:amz:east-2:es" --user "key:secret" $URL
	---
	Use AWS V4 signature authentication in the transfer.

docs/cmdline-opts/cacert.d+1 -0

@@ -3,6 +3,7 @@ Arg: <file>
	Help: CA certificate to verify peer against
	Protocols: TLS
	Category: tls
+	See-also: capath insecure
	Example: --cacert CA-file.txt $URL
	Added: 7.5
	---

docs/cmdline-opts/capath.d+1 -0

@@ -3,6 +3,7 @@ Arg: <dir>
	Help: CA directory to verify peer against
	Protocols: TLS
	Category: tls
+	See-also: cacert insecure
	Example: --capath /local/directory $URL
	Added: 7.9.8
	---

docs/cmdline-opts/cert-status.d+1 -0

@@ -3,6 +3,7 @@ Protocols: TLS
	Added: 7.41.0
	Help: Verify the status of the server cert via OCSP-staple
	Category: tls
+	See-also: pinnedpubkey
	Example: --cert-status $URL
	---
	Tells curl to verify the status of the server certificate by using the

docs/cmdline-opts/ciphers.d+1 -0

@@ -3,6 +3,7 @@ Arg: <list of ciphers>
	Help: SSL ciphers to use
	Protocols: TLS
	Category: tls
+	See-also: tlsv1.3
	Example: --ciphers ECDHE-ECDSA-AES256-CCM8 $URL
	Added: 7.9
	---

docs/cmdline-opts/compressed-ssh.d+1 -0

@@ -3,6 +3,7 @@ Help: Enable SSH compression
	Protocols: SCP SFTP
	Added: 7.56.0
	Category: scp ssh
+	See-also: compressed
	Example: --compressed-ssh sftp://example.com/
	---
	Enables built-in SSH compression.

docs/cmdline-opts/compressed.d+1 -0

@@ -3,6 +3,7 @@ Help: Request compressed response
	Protocols: HTTP
	Category: http
	Example: --compressed $URL
+	See-also: compressed-ssh
	Added: 7.10
	---
	Request a compressed response using one of the algorithms curl supports, and

docs/cmdline-opts/config.d+1 -0

@@ -5,6 +5,7 @@ Short: K
	Category: curl
	Example: --config file.txt $URL
	Added: 4.10
+	See-also: disable
	---
	Specify a text file to read curl arguments from. The command line arguments
	found in the text file will be used as if they were provided on the command

docs/cmdline-opts/cookie-jar.d+1 -0

@@ -7,6 +7,7 @@ Category: http
	Example: -c store-here.txt $URL
	Example: -c store-here.txt -b read-these $URL
	Added: 7.9
+	See-also: cookie
	---
	Specify to which file you want curl to write all cookies after a completed
	operation. Curl writes all cookies from its in-memory cookie storage to the

docs/cmdline-opts/cookie.d+1 -0

@@ -6,6 +6,7 @@ Help: Send cookies from string/file
	Category: http
	Example: -b cookiefile $URL
	Example: -b cookiefile -c cookiefile $URL
+	See-also: cookie-jar junk-session-cookies
	Added: 4.9
	---
	Pass the data to the HTTP server in the Cookie header. It is supposedly

docs/cmdline-opts/create-dirs.d+1 -0

@@ -3,6 +3,7 @@ Help: Create necessary local directory hierarchy
	Category: curl
	Example: --create-dirs --output local/dir/file $URL
	Added: 7.10.3
+	See-also: ftp-create-dirs output-dir
	---
	When used in conjunction with the --output option, curl will create the
	necessary local directory hierarchy as needed. This option creates the

docs/cmdline-opts/crlf.d+1 -0

@@ -4,6 +4,7 @@ Protocols: FTP SMTP
	Category: ftp smtp
	Example: --crlf -T file ftp://example.com/
	Added: 5.7
+	See-also: use-ascii
	---
	Convert LF to CRLF in upload. Useful for MVS (OS/390).

docs/cmdline-opts/crlfile.d+1 -0

@@ -5,6 +5,7 @@ Help: Use this CRL list
	Added: 7.19.7
	Category: tls
	Example: --crlfile rejects.txt $URL
+	See-also: cacert capath
	---
	Provide a file using PEM format with a Certificate Revocation List that may
	specify peer certificates that are to be considered revoked.

docs/cmdline-opts/curves.d+1 -0

@@ -5,6 +5,7 @@ Protocols: TLS
	Added: 7.73.0
	Category: tls
	Example: --curves X25519 $URL
+	See-also: ciphers
	---
	Tells curl to request specific curves to use during SSL session establishment
	according to RFC 8422, 5.1. Multiple algorithms can be provided by separating

docs/cmdline-opts/data-ascii.d+1 -0

@@ -5,5 +5,6 @@ Protocols: HTTP
	Category: http post upload
	Example: --data-ascii @file $URL
	Added: 7.2
+	See-also: data-binary data-raw data-urlencode
	---
	This is just an alias for --data.

docs/cmdline-opts/data-binary.d+1 -0

@@ -5,6 +5,7 @@ Protocols: HTTP
	Category: http post upload
	Example: --data-binary @filename $URL
	Added: 7.2
+	See-also: data-ascii
	---
	This posts data exactly as specified with no extra processing whatsoever.

docs/cmdline-opts/delegation.d+1 -0

@@ -5,6 +5,7 @@ Protocols: GSS/kerberos
	Category: auth
	Example: --delegation "none" $URL
	Added: 7.22.0
+	See-also: insecure ssl
	---
	Set LEVEL to tell the server what it is allowed to delegate when it
	comes to user credentials.

docs/cmdline-opts/disable-eprt.d+1 -0

@@ -4,6 +4,7 @@ Protocols: FTP
	Category: ftp
	Example: --disable-eprt ftp://example.com/
	Added: 7.10.5
+	See-also: disable-epsv ftp-port
	---
	Tell curl to disable the use of the EPRT and LPRT commands when doing active
	FTP transfers. Curl will normally always first attempt to use EPRT, then LPRT

docs/cmdline-opts/disable-epsv.d+1 -0

@@ -4,6 +4,7 @@ Protocols: FTP
	Category: ftp
	Example: --disable-epsv ftp://example.com/
	Added: 7.9.2
+	See-also: disable-eprt ftp-port
	---
	Tell curl to disable the use of the EPSV command when doing passive FTP
	transfers. Curl will normally always first attempt to use EPSV before

docs/cmdline-opts/disable.d+1 -0

@@ -4,6 +4,7 @@ Help: Disable .curlrc
	Category: curl
	Example: -q $URL
	Added: 5.0
+	See-also: config
	---
	If used as the first parameter on the command line, the curlrc config
	file will not be read and used. See the --config for details on the default

docs/cmdline-opts/dns-servers.d+1 -0

@@ -5,6 +5,7 @@ Requires: c-ares
	Added: 7.33.0
	Category: dns
	Example: --dns-servers 192.168.0.1,192.168.0.2 $URL
+	See-also: dns-interface dns-ipv4-addr
	---
	Set the list of DNS servers to be used instead of the system default.
	The list of IP addresses should be separated with commas. Port numbers

docs/cmdline-opts/doh-cert-status.d+1 -0

@@ -4,5 +4,6 @@ Protocols: all
	Added: 7.76.0
	Category: dns tls
	Example: --doh-cert-status --doh-url https://doh.example $URL
+	See-also: doh-insecure
	---
	Same as --cert-status but used for DoH (DNS-over-HTTPS).

docs/cmdline-opts/doh-insecure.d+1 -0

@@ -4,5 +4,6 @@ Protocols: all
	Added: 7.76.0
	Category: dns tls
	Example: --doh-insecure --doh-url https://doh.example $URL
+	See-also: doh-url
	---
	Same as --insecure but used for DoH (DNS-over-HTTPS).

docs/cmdline-opts/doh-url.d+1 -0

@@ -5,6 +5,7 @@ Protocols: all
	Added: 7.62.0
	Category: dns
	Example: --doh-url https://doh.example $URL
+	See-also: doh-insecure
	---
	Specifies which DNS-over-HTTPS (DoH) server to use to resolve hostnames,
	instead of using the default name resolver mechanism. The URL must be HTTPS.

docs/cmdline-opts/engine.d+1 -0

@@ -5,6 +5,7 @@ Protocols: TLS
	Category: tls
	Example: --engine flavor $URL
	Added: 7.9.3
+	See-also: ciphers curves
	---
	Select the OpenSSL crypto engine to use for cipher operations. Use --engine
	list to print a list of build-time supported engines. Note that not all (and

docs/cmdline-opts/etag-compare.d+1 -0

@@ -5,6 +5,7 @@ Protocols: HTTP
	Added: 7.68.0
	Category: http
	Example: --etag-compare etag.txt $URL
+	See-also: etag-save time-cond
	---
	This option makes a conditional HTTP request for the specific ETag read
	from the given file by sending a custom If-None-Match header using the

docs/cmdline-opts/etag-save.d+1 -0

@@ -5,6 +5,7 @@ Protocols: HTTP
	Added: 7.68.0
	Category: http
	Example: --etag-save storetag.txt $URL
+	See-also: etag-compare
	---
	This option saves an HTTP ETag to the specified file. An ETag is a
	caching related header, usually returned in a response.

docs/cmdline-opts/fail-early.d+1 -0

@@ -3,6 +3,7 @@ Help: Fail on first transfer error, do not continue
	Added: 7.52.0
	Category: curl
	Example: --fail-early $URL https://two.example
+	See-also: fail fail-with-body
	---
	Fail and exit on the first detected transfer error.

docs/cmdline-opts/false-start.d+1 -0

@@ -4,6 +4,7 @@ Protocols: TLS
	Added: 7.42.0
	Category: tls
	Example: --false-start $URL
+	See-also: tcp-fastopen
	---
	Tells curl to use false start during the TLS handshake. False start is a mode
	where a TLS client will start sending application data before verifying the

docs/cmdline-opts/form.d+1 -0

@@ -7,6 +7,7 @@ Mutexed: data head upload-file
	Category: http upload
	Example: --form "name=curl" --form "file=@loadthis" $URL
	Added: 5.0
+	See-also: data form-string form-escape
	---
	For HTTP protocol family, this lets curl emulate a filled-in form in which a
	user has pressed the submit button. This causes curl to POST data using the

docs/cmdline-opts/ftp-account.d+1 -0

@@ -5,6 +5,7 @@ Protocols: FTP
	Added: 7.13.0
	Category: ftp auth
	Example: --ftp-account "mr.robot" ftp://example.com/
+	See-also: user
	---
	When an FTP server asks for "account data" after user name and password has
	been provided, this data is sent off using the ACCT command.

docs/cmdline-opts/ftp-alternative-to-user.d+1 -0

@@ -5,6 +5,7 @@ Protocols: FTP
	Added: 7.15.5
	Category: ftp
	Example: --ftp-alternative-to-user "U53r" ftp://example.com
+	See-also: ftp-account user
	---
	If authenticating with the USER and PASS commands fails, send this command.
	When connecting to Tumbleweed's Secure Transport server over FTPS using a

docs/cmdline-opts/ftp-method.d+1 -0

@@ -7,6 +7,7 @@ Category: ftp
	Example: --ftp-method multicwd ftp://example.com/dir1/dir2/file
	Example: --ftp-method nocwd ftp://example.com/dir1/dir2/file
	Example: --ftp-method singlecwd ftp://example.com/dir1/dir2/file
+	See-also: list-only
	---
	Control what method curl should use to reach a file on an FTP(S)
	server. The method argument should be one of the following alternatives:

docs/cmdline-opts/ftp-pret.d+1 -0

@@ -4,6 +4,7 @@ Protocols: FTP
	Added: 7.20.0
	Category: ftp
	Example: --ftp-pret ftp://example.com/
+	See-also: ftp-port ftp-pasv
	---
	Tell curl to send a PRET command before PASV (and EPSV). Certain FTP servers,
	mainly drftpd, require this non-standard command for directory listings as

docs/cmdline-opts/ftp-ssl-control.d+1 -0

@@ -4,6 +4,7 @@ Protocols: FTP
	Added: 7.16.0
	Category: ftp tls
	Example: --ftp-ssl-control ftp://example.com
+	See-also: ssl
	---
	Require SSL/TLS for the FTP login, clear for transfer. Allows secure
	authentication, but non-encrypted data transfers for efficiency. Fails the

docs/cmdline-opts/gen.pl+12 -8

@@ -239,19 +239,23 @@ sub single {
	elsif(/^---/) {
	if(!$long) {
	print STDERR "ERROR: no 'Long:' in $f\n";
-	exit 1;
+	return 1;
	}
	if(!$category) {
	print STDERR "ERROR: no 'Category:' in $f\n";
-	exit 2;
+	return 2;
	}
	if(!$examples[0]) {
	print STDERR "$f:$line:1:ERROR: no 'Example:' present\n";
-	exit 2;
+	return 2;
	}
	if(!$added) {
	print STDERR "$f:$line:1:ERROR: no 'Added:' version present\n";
-	exit 2;
+	return 2;
+	}
+	if(!$seealso) {
+	print STDERR "$f:$line:1:ERROR: no 'See-also:' field present\n";
+	return 2;
	}
	last;
	}
@@ -315,7 +319,7 @@ sub single {
	my $i = 0;
	for my $k (@m) {
	if(!$helplong{$k}) {
-	print STDERR "WARN: $f see-alsos a non-existing option: $k\n";
+	print STDERR "$f:$line:1:WARN: see-also a non-existing option: $k\n";
	}
	my $l = manpageify($k);
	my $sep = " and";
@@ -533,17 +537,17 @@ sub listcats {

	sub mainpage {
	my (@files) = @_;
+	my $ret;
	# show the page header
	header("page-header");

	# output docs for all options
	foreach my $f (sort @files) {
-	if(single($f, 0)) {
-	print STDERR "Can't read $f?\n";
-	}
+	$ret += single($f, 0);
	}

	header("page-footer");
+	exit $ret if($ret);
	}

	sub showonly {

docs/cmdline-opts/get.d+1 -0

@@ -6,6 +6,7 @@ Example: --get $URL
	Example: --get -d "tool=curl" -d "age=old" $URL
	Example: --get -I -d "tool=curl" $URL
	Added: 7.8.1
+	See-also: data request
	---
	When used, this option will make all data specified with --data, --data-binary
	or --data-urlencode to be used in an HTTP GET request instead of the POST

docs/cmdline-opts/globoff.d+1 -0

@@ -4,6 +4,7 @@ Help: Disable URL sequences and ranges using {} and []
	Category: curl
	Example: -g "https://example.com/{[]}}}}"
	Added: 7.6
+	See-also: config disable
	---
	This option switches off the "URL globbing parser". When you set this option,
	you can specify URLs that contain the letters {}[] without having curl itself

docs/cmdline-opts/happy-eyeballs-timeout-ms.d+1 -0

@@ -4,6 +4,7 @@ Help: Time for IPv6 before trying IPv4
	Added: 7.59.0
	Category: connection
	Example: --happy-eyeballs-timeout-ms 500 $URL
+	See-also: max-time connect-timeout
	---
	Happy Eyeballs is an algorithm that attempts to connect to both IPv4 and IPv6
	addresses for dual-stack hosts, giving IPv6 a head-start of the specified

docs/cmdline-opts/haproxy-protocol.d+1 -0

@@ -4,6 +4,7 @@ Protocols: HTTP
	Added: 7.60.0
	Category: http proxy
	Example: --haproxy-protocol $URL
+	See-also: proxy
	---
	Send a HAProxy PROXY protocol v1 header at the beginning of the
	connection. This is used by some load balancers and reverse proxies to

docs/cmdline-opts/head.d+1 -0

@@ -5,6 +5,7 @@ Protocols: HTTP FTP FILE
	Category: http ftp file
	Example: -I $URL
	Added: 4.0
+	See-also: get verbose trace-ascii
	---
	Fetch the headers only! HTTP-servers feature the command HEAD which this uses
	to get nothing but the header of a document. When used on an FTP or FILE file,

docs/cmdline-opts/help.d+1 -0

@@ -5,6 +5,7 @@ Help: Get help for commands
	Category: important curl
	Example: --help all
	Added: 4.0
+	See-also: verbose
	---
	Usage help. This lists all commands of the <category>.
	If no arg was provided, curl will display the most important

docs/cmdline-opts/hostpubmd5.d+1 -0

@@ -5,6 +5,7 @@ Protocols: SFTP SCP
	Added: 7.17.1
	Category: sftp scp
	Example: --hostpubmd5 e5c1c49020640a5ab0f2034854c321a8 sftp://example.com/
+	See-also: hostpubsha256
	---
	Pass a string containing 32 hexadecimal digits. The string should
	be the 128 bit MD5 checksum of the remote host's public key, curl will refuse

docs/cmdline-opts/hostpubsha256.d+1 -0

@@ -5,6 +5,7 @@ Protocols: SFTP SCP
	Added: 7.80.0
	Category: sftp scp
	Example: --hostpubsha256 NDVkMTQxMGQ1ODdmMjQ3MjczYjAyOTY5MmRkMjVmNDQ= sftp://example.com/
+	See-also: hostpubmd5
	---
	Pass a string containing a Base64-encoded SHA256 hash of the remote
	host's public key. Curl will refuse the connection with the host

docs/cmdline-opts/hsts.d+1 -0

@@ -5,6 +5,7 @@ Help: Enable HSTS with this cache file
	Added: 7.74.0
	Category: http
	Example: --hsts cache.txt $URL
+	See-also: proto
	---
	This option enables HSTS for the transfer. If the file name points to an
	existing HSTS cache file, that will be used. After a completed transfer, the

docs/cmdline-opts/http0.9.d+1 -0

@@ -5,6 +5,7 @@ Help: Allow HTTP 0.9 responses
	Category: http
	Example: --http0.9 $URL
	Added: 7.64.0
+	See-also: http1.1 http2 http3
	---
	Tells curl to be fine with HTTP version 0.9 response.

docs/cmdline-opts/http1.0.d+1 -0

@@ -7,6 +7,7 @@ Mutexed: http1.1 http2
	Help: Use HTTP 1.0
	Category: http
	Example: --http1.0 $URL
+	See-also: http0.9 http1.1
	---
	Tells curl to use HTTP version 1.0 instead of using its internally preferred
	HTTP version.

docs/cmdline-opts/http1.1.d+1 -0

@@ -6,5 +6,6 @@ Mutexed: http1.0 http2
	Help: Use HTTP 1.1
	Category: http
	Example: --http1.1 $URL
+	See-also: http1.1 http0.9
	---
	Tells curl to use HTTP version 1.1.

docs/cmdline-opts/http2-prior-knowledge.d+1 -0

@@ -7,6 +7,7 @@ Requires: HTTP/2
	Help: Use HTTP 2 without HTTP/1.1 Upgrade
	Category: http
	Example: --http2-prior-knowledge $URL
+	See-also: http2 http3
	---
	Tells curl to issue its non-TLS HTTP requests using HTTP/2 without HTTP/1.1
	Upgrade. It requires prior knowledge that the server supports HTTP/2 straight

docs/cmdline-opts/ignore-content-length.d+1 -0

@@ -4,6 +4,7 @@ Protocols: FTP HTTP
	Category: http ftp
	Example: --ignore-content-length $URL
	Added: 7.14.1
+	See-also: ftp-skip-pasv-ip
	---
	For HTTP, Ignore the Content-Length header. This is particularly useful for
	servers running Apache 1.x, which will report incorrect Content-Length for

docs/cmdline-opts/keepalive-time.d+1 -0

@@ -4,6 +4,7 @@ Help: Interval time for keepalive probes
	Added: 7.18.0
	Category: connection
	Example: --keepalive-time 20 $URL
+	See-also: no-keepalive max-time
	---
	This option sets the time a connection needs to remain idle before sending
	keepalive probes and the time between individual keepalive probes. It is

docs/cmdline-opts/key-type.d+1 -0

@@ -5,6 +5,7 @@ Protocols: TLS
	Category: tls
	Example: --key-type DER --key here $URL
	Added: 7.9.3
+	See-also: key
	---
	Private key file type. Specify which type your --key provided private key
	is. DER, PEM, and ENG are supported. If not specified, PEM is assumed.

docs/cmdline-opts/key.d+1 -0

@@ -5,6 +5,7 @@ Help: Private key file name
	Category: tls ssh
	Example: --cert certificate --key here $URL
	Added: 7.9.3
+	See-also: key-type cert
	---
	Private key file name. Allows you to provide your private key in this separate
	file. For SSH, if not specified, curl tries the following candidates in order:

docs/cmdline-opts/krb.d+1 -0

@@ -6,6 +6,7 @@ Requires: Kerberos
	Category: ftp
	Example: --krb clear ftp://example.com/
	Added: 7.3
+	See-also: delegation ssl
	---
	Enable Kerberos authentication and use. The level must be entered and should
	be one of 'clear', 'safe', 'confidential', or 'private'. Should you use a

docs/cmdline-opts/libcurl.d+1 -0

@@ -4,6 +4,7 @@ Help: Dump libcurl equivalent code of this command line
	Added: 7.16.1
	Category: curl
	Example: --libcurl client.c $URL
+	See-also: verbose
	---
	Append this option to any ordinary curl command line, and you will get
	libcurl-using C source code written to the file that does the equivalent

docs/cmdline-opts/limit-rate.d+1 -0

@@ -6,6 +6,7 @@ Example: --limit-rate 100K $URL
	Example: --limit-rate 1000 $URL
	Example: --limit-rate 10M $URL
	Added: 7.10
+	See-also: speed-limit speed-time
	---
	Specify the maximum transfer rate you want curl to use - for both downloads
	and uploads. This feature is useful if you have a limited pipe and you would like

docs/cmdline-opts/list-only.d+1 -0

@@ -5,6 +5,7 @@ Help: List only mode
	Added: 4.0
	Category: ftp pop3
	Example: --list-only ftp://example.com/dir/
+	See-also: quote request
	---
	(FTP)
	When listing an FTP directory, this switch forces a name-only view. This is

docs/cmdline-opts/local-port.d+1 -0

@@ -4,6 +4,7 @@ Help: Force use of RANGE for local port numbers
	Added: 7.15.2
	Category: connection
	Example: --local-port 1000-3000 $URL
+	See-also: globoff
	---
	Set a preferred single number or range (FROM-TO) of local port numbers to use
	for the connection(s). Note that port numbers by nature are a scarce resource

docs/cmdline-opts/location.d+1 -0

@@ -5,6 +5,7 @@ Protocols: HTTP
	Category: http
	Example: -L $URL
	Added: 4.9
+	See-also: resolve alt-svc
	---
	If the server reports that the requested page has moved to a different
	location (indicated with a Location: header and a 3XX response code), this

docs/cmdline-opts/login-options.d+1 -0

@@ -5,6 +5,7 @@ Help: Server login options
	Added: 7.34.0
	Category: imap pop3 smtp auth
	Example: --login-options 'AUTH=*' imap://example.com
+	See-also: user
	---
	Specify the login options to use during server authentication.

docs/cmdline-opts/mail-rcpt-allowfails.d+1 -0

@@ -4,6 +4,7 @@ Protocols: SMTP
	Added: 7.69.0
	Category: smtp
	Example: --mail-rcpt-allowfails --mail-rcpt [email protected] smtp://example.com
+	See-also: mail-rcpt
	---
	When sending data to multiple recipients, by default curl will abort SMTP
	conversation if at least one of the recipients causes RCPT TO command to

docs/cmdline-opts/mail-rcpt.d+1 -0

@@ -5,6 +5,7 @@ Protocols: SMTP
	Added: 7.20.0
	Category: smtp
	Example: --mail-rcpt [email protected] smtp://example.com
+	See-also: mail-rcpt-allowfails
	---
	Specify a single e-mail address, user name or mailing list name. Repeat this
	option several times to send to multiple recipients.

docs/cmdline-opts/manual.d+1 -0

@@ -4,5 +4,6 @@ Help: Display the full manual
	Category: curl
	Example: --manual
	Added: 5.2
+	See-also: verbose libcurl trace
	---
	Manual. Display the huge help text.

docs/cmdline-opts/max-redirs.d+1 -0

@@ -5,6 +5,7 @@ Protocols: HTTP
	Category: http
	Example: --max-redirs 3 --location $URL
	Added: 7.5
+	See-also: location
	---
	Set maximum number of redirections to follow. When --location is used, to
	prevent curl from following too many redirects, by default, the limit is

docs/cmdline-opts/metalink.d+1 -0

@@ -3,6 +3,7 @@ Help: Process given URLs as metalink XML file
	Added: 7.27.0
	Category: misc
	Example: --metalink file $URL
+	See-also: parallel
	---
	This option was previously used to specify a metalink resource. Metalink
	support has been disabled in curl since 7.78.0 for security reasons.

docs/cmdline-opts/netrc-file.d+1 -0

@@ -5,6 +5,7 @@ Added: 7.21.5
	Mutexed: netrc
	Category: curl
	Example: --netrc-file netrc $URL
+	See-also: netrc user config
	---
	This option is similar to --netrc, except that you provide the path (absolute
	or relative) to the netrc file that curl should use. You can only specify one

docs/cmdline-opts/netrc.d+1 -0

@@ -4,6 +4,7 @@ Help: Must read .netrc for user name and password
	Category: curl
	Example: --netrc $URL
	Added: 4.6
+	See-also: netrc-file config user
	---
	Makes curl scan the .netrc (_netrc on Windows) file in the user's home
	directory for login name and password. This is typically used for FTP on

docs/cmdline-opts/next.d+1 -0

@@ -8,6 +8,7 @@ Help: Make next URL use its separate set of options
	Category: curl
	Example: $URL --next -d postthis www2.example.com
	Example: -I $URL --next https://example.net/
+	See-also: parallel config
	---
	Tells curl to use a separate operation for the following URL and associated
	options. This allows you to send several URL requests, each with their own

docs/cmdline-opts/no-buffer.d+1 -0

@@ -4,6 +4,7 @@ Help: Disable buffering of the output stream
	Category: curl
	Example: --no-buffer $URL
	Added: 6.5
+	See-also: progress-bar
	---
	Disables the buffering of the output stream. In normal work situations, curl
	will use a standard buffered output stream that will have the effect that it

docs/cmdline-opts/no-keepalive.d+1 -0

@@ -3,6 +3,7 @@ Help: Disable TCP keepalive on the connection
	Category: connection
	Example: --no-keepalive $URL
	Added: 7.18.0
+	See-also: keepalive-time
	---
	Disables the use of keepalive messages on the TCP connection. curl otherwise
	enables them by default.

docs/cmdline-opts/no-sessionid.d+1 -0

@@ -4,6 +4,7 @@ Protocols: TLS
	Added: 7.16.0
	Category: tls
	Example: --no-sessionid $URL
+	See-also: insecure
	---
	Disable curl's use of SSL session-ID caching. By default all transfers are
	done using the cache. Note that while nothing should ever get hurt by

docs/cmdline-opts/noproxy.d+1 -0

@@ -4,6 +4,7 @@ Help: List of hosts which do not use proxy
	Added: 7.19.4
	Category: proxy
	Example: --noproxy "www.example" $URL
+	See-also: proxy
	---
	Comma-separated list of hosts for which not to use a proxy, if one is
	specified. The only wildcard is a single * character, which matches all hosts,

docs/cmdline-opts/oauth2-bearer.d+1 -0

@@ -5,6 +5,7 @@ Protocols: IMAP POP3 SMTP HTTP
	Category: auth
	Example: --oauth2-bearer "mF_9.B5f-4.1JqM" $URL
	Added: 7.33.0
+	See-also: basic ntlm digest
	---
	Specify the Bearer Token for OAUTH 2.0 server authentication. The Bearer Token
	is used in conjunction with the user name which can be specified as part of

docs/cmdline-opts/parallel.d+1 -0

@@ -4,6 +4,7 @@ Help: Perform transfers in parallel
	Added: 7.66.0
	Category: connection curl
	Example: --parallel $URL -o file1 $URL -o file2
+	See-also: next verbose
	---
	Makes curl perform its transfers in parallel as compared to the regular serial
	manner.

docs/cmdline-opts/pass.d+1 -0

@@ -5,6 +5,7 @@ Protocols: SSH TLS
	Category: ssh tls auth
	Example: --pass secret --key file $URL
	Added: 7.9.3
+	See-also: key user
	---
	Passphrase for the private key.

docs/cmdline-opts/path-as-is.d+1 -0

@@ -3,6 +3,7 @@ Help: Do not squash .. sequences in URL path
	Added: 7.42.0
	Category: curl
	Example: --path-as-is https://example.com/../../etc/passwd
+	See-also: request-target
	---
	Tell curl to not handle sequences of /../ or /./ in the given URL
	path. Normally curl will squash or merge them according to standards but with

docs/cmdline-opts/pinnedpubkey.d+1 -0

@@ -6,6 +6,7 @@ Category: tls
	Example: --pinnedpubkey keyfile $URL
	Example: --pinnedpubkey 'sha256//ce118b51897f4452dc' $URL
	Added: 7.39.0
+	See-also: hostpubsha256
	---
	Tells curl to use the specified public key file (or hashes) to verify the
	peer. This can be a path to a file which contains a single public key in PEM

docs/cmdline-opts/preproxy.d+1 -0

@@ -4,6 +4,7 @@ Help: Use this proxy first
	Added: 7.52.0
	Category: proxy
	Example: --preproxy socks5://proxy.example -x http://http.example $URL
+	See-also: proxy socks5
	---
	Use the specified SOCKS proxy before connecting to an HTTP or HTTPS --proxy. In
	such a case curl first connects to the SOCKS proxy and then connects (through

docs/cmdline-opts/progress-bar.d+1 -0

@@ -4,6 +4,7 @@ Help: Display transfer progress as a bar
	Category: verbose
	Example: -# -O $URL
	Added: 5.10
+	See-also: styled-output
	---
	Make curl display transfer progress as a simple progress bar instead of the
	standard, more informational, meter.

docs/cmdline-opts/proto-default.d+1 -0

@@ -4,6 +4,7 @@ Arg: <protocol>
	Added: 7.45.0
	Category: connection curl
	Example: --proto-default https ftp.example.com
+	See-also: proto proto-redir
	---
	Tells curl to use protocol for any URL missing a scheme name.

docs/cmdline-opts/proto-redir.d+1 -0

@@ -4,6 +4,7 @@ Help: Enable/disable PROTOCOLS on redirect
	Added: 7.20.2
	Category: connection curl
	Example: --proto-redir =http,https $URL
+	See-also: proto
	---
	Tells curl to limit what protocols it may use on redirect. Protocols denied by
	--proto are not overridden by this option. See --proto for how protocols are

docs/cmdline-opts/proxy-cert-type.d+1 -0

@@ -4,5 +4,6 @@ Added: 7.52.0
	Help: Client certificate type for HTTPS proxy
	Category: proxy tls
	Example: --proxy-cert-type PEM --proxy-cert file -x https://proxy $URL
+	See-also: proxy-cert
	---
	Same as --cert-type but used in HTTPS proxy context.

docs/cmdline-opts/proxy-cert.d+1 -0

@@ -4,5 +4,6 @@ Help: Set client certificate for proxy
	Added: 7.52.0
	Category: proxy tls
	Example: --proxy-cert file -x https://proxy $URL
+	See-also: proxy-cert-type
	---
	Same as --cert but used in HTTPS proxy context.

docs/cmdline-opts/proxy-ciphers.d+1 -0

@@ -4,5 +4,6 @@ Help: SSL ciphers to use for proxy
	Added: 7.52.0
	Category: proxy tls
	Example: --proxy-ciphers ECDHE-ECDSA-AES256-CCM8 -x https://proxy $URL
+	See-also: ciphers curves proxy
	---
	Same as --ciphers but used in HTTPS proxy context.

docs/cmdline-opts/proxy-crlfile.d+1 -0

@@ -4,5 +4,6 @@ Help: Set a CRL list for proxy
	Added: 7.52.0
	Category: proxy tls
	Example: --proxy-crlfile rejects.txt -x https://proxy $URL
+	See-also: crlfile proxy
	---
	Same as --crlfile but used in HTTPS proxy context.

docs/cmdline-opts/proxy-header.d+1 -0

@@ -7,6 +7,7 @@ Category: proxy
	Example: --proxy-header "X-First-Name: Joe" -x http://proxy $URL
	Example: --proxy-header "User-Agent: surprise" -x http://proxy $URL
	Example: --proxy-header "Host:" -x http://proxy $URL
+	See-also: proxy
	---
	Extra header to include in the request when sending HTTP to a proxy. You may
	specify any number of extra headers. This is the equivalent option to --header

docs/cmdline-opts/proxy-insecure.d+1 -0

@@ -3,5 +3,6 @@ Help: Do HTTPS proxy connections without verifying the proxy
	Added: 7.52.0
	Category: proxy tls
	Example: --proxy-insecure -x https://proxy $URL
+	See-also: proxy insecure
	---
	Same as --insecure but used in HTTPS proxy context.

docs/cmdline-opts/proxy-key-type.d+1 -0

@@ -4,5 +4,6 @@ Help: Private key file type for proxy
	Added: 7.52.0
	Category: proxy tls
	Example: --proxy-key-type DER --proxy-key here -x https://proxy $URL
+	See-also: proxy-key proxy
	---
	Same as --key-type but used in HTTPS proxy context.

docs/cmdline-opts/proxy-key.d+1 -0

@@ -4,5 +4,6 @@ Arg: <key>
	Category: proxy tls
	Example: --proxy-key here -x https://proxy $URL
	Added: 7.52.0
+	See-also: proxy-key-type proxy
	---
	Same as --key but used in HTTPS proxy context.

docs/cmdline-opts/proxy-pass.d+1 -0

@@ -4,5 +4,6 @@ Help: Pass phrase for the private key for HTTPS proxy
	Added: 7.52.0
	Category: proxy tls auth
	Example: --proxy-pass secret --proxy-key here -x https://proxy $URL
+	See-also: proxy proxy-key
	---
	Same as --pass but used in HTTPS proxy context.

docs/cmdline-opts/proxy-pinnedpubkey.d+1 -0

@@ -6,6 +6,7 @@ Category: proxy tls
	Example: --proxy-pinnedpubkey keyfile $URL
	Example: --proxy-pinnedpubkey 'sha256//ce118b51897f4452dc' $URL
	Added: 7.59.0
+	See-also: pinnedpubkey proxy
	---
	Tells curl to use the specified public key file (or hashes) to verify the
	proxy. This can be a path to a file which contains a single public key in PEM

docs/cmdline-opts/proxy-service-name.d+1 -0

@@ -4,5 +4,6 @@ Help: SPNEGO proxy service name
	Added: 7.43.0
	Category: proxy tls
	Example: --proxy-service-name "shrubbery" -x proxy $URL
+	See-also: service-name proxy
	---
	This option allows you to change the service name for proxy negotiation.

docs/cmdline-opts/proxy-ssl-allow-beast.d+1 -0

@@ -3,5 +3,6 @@ Help: Allow security flaw for interop for HTTPS proxy
	Added: 7.52.0
	Category: proxy tls
	Example: --proxy-ssl-allow-beast -x https://proxy $URL
+	See-also: ssl-allow-beast proxy
	---
	Same as --ssl-allow-beast but used in HTTPS proxy context.

docs/cmdline-opts/proxy-ssl-auto-client-cert.d+1 -0

@@ -3,5 +3,6 @@ Help: Use auto client certificate for proxy (Schannel)
	Added: 7.77.0
	Category: proxy tls
	Example: --proxy-ssl-auto-client-cert -x https://proxy $URL
+	See-also: ssl-auto-client-cert proxy
	---
	Same as --ssl-auto-client-cert but used in HTTPS proxy context.

docs/cmdline-opts/proxy-tls13-ciphers.d+1 -0

@@ -5,6 +5,7 @@ Protocols: TLS
	Category: proxy tls
	Example: --proxy-tls13-ciphers TLS_AES_128_GCM_SHA256 -x proxy $URL
	Added: 7.61.0
+	See-also: tls13-ciphers curves
	---
	Specifies which cipher suites to use in the connection to your HTTPS proxy
	when it negotiates TLS 1.3. The list of ciphers suites must specify valid

docs/cmdline-opts/proxy-tlsauthtype.d+1 -0

@@ -4,5 +4,6 @@ Help: TLS authentication type for HTTPS proxy
	Added: 7.52.0
	Category: proxy tls auth
	Example: --proxy-tlsauthtype SRP -x https://proxy $URL
+	See-also: proxy proxy-tlsuser
	---
	Same as --tlsauthtype but used in HTTPS proxy context.

docs/cmdline-opts/proxy-tlspassword.d+1 -0

@@ -4,5 +4,6 @@ Help: TLS password for HTTPS proxy
	Added: 7.52.0
	Category: proxy tls auth
	Example: --proxy-tlspassword passwd -x https://proxy $URL
+	See-also: proxy proxy-tlsuser
	---
	Same as --tlspassword but used in HTTPS proxy context.

docs/cmdline-opts/proxy-tlsuser.d+1 -0

@@ -4,5 +4,6 @@ Help: TLS username for HTTPS proxy
	Added: 7.52.0
	Category: proxy tls auth
	Example: --proxy-tlsuser smith -x https://proxy $URL
+	See-also: proxy proxy-tlspassword
	---
	Same as --tlsuser but used in HTTPS proxy context.

docs/cmdline-opts/proxy-tlsv1.d+1 -0

@@ -3,5 +3,6 @@ Help: Use TLSv1 for HTTPS proxy
	Added: 7.52.0
	Category: proxy tls auth
	Example: --proxy-tlsv1 -x https://proxy $URL
+	See-also: proxy
	---
	Same as --tlsv1 but used in HTTPS proxy context.

docs/cmdline-opts/proxy-user.d+1 -0

@@ -5,6 +5,7 @@ Help: Proxy user and password
	Category: proxy auth
	Example: --proxy-user name:pwd -x proxy $URL
	Added: 4.0
+	See-also: proxy-pass
	---
	Specify the user name and password to use for proxy authentication.

docs/cmdline-opts/proxy.d+1 -0

@@ -5,6 +5,7 @@ Help: Use this proxy
	Category: proxy
	Example: --proxy http://proxy.example $URL
	Added: 4.0
+	See-also: socks5 proxy-basic
	---
	Use the specified proxy.

docs/cmdline-opts/proxy1.0.d+1 -0

@@ -4,6 +4,7 @@ Help: Use HTTP/1.0 proxy on given port
	Category: proxy
	Example: --proxy1.0 -x http://proxy $URL
	Added: 7.19.4
+	See-also: proxy socks5 preproxy
	---
	Use the specified HTTP 1.0 proxy. If the port number is not specified, it is
	assumed at port 1080.

docs/cmdline-opts/pubkey.d+1 -0

@@ -5,6 +5,7 @@ Help: SSH Public key file name
	Category: sftp scp auth
	Example: --pubkey file.pub sftp://example.com/
	Added: 7.16.2
+	See-also: pass
	---
	Public key file name. Allows you to provide your public key in this separate
	file.

docs/cmdline-opts/quote.d+1 -0

@@ -6,6 +6,7 @@ Protocols: FTP SFTP
	Category: ftp sftp
	Example: --quote "DELE file" ftp://example.com/foo
	Added: 5.3
+	See-also: request
	---
	Send an arbitrary command to the remote FTP or SFTP server. Quote commands are
	sent BEFORE the transfer takes place (just after the initial PWD command in an

docs/cmdline-opts/random-file.d+1 -0

@@ -4,6 +4,7 @@ Help: File for reading random data from
	Category: misc
	Example: --random-file rubbish $URL
	Added: 7.7
+	See-also: egd-file
	---
	Specify the path name to file containing what will be considered as random
	data. The data may be used to seed the random engine for SSL connections. See

docs/cmdline-opts/range.d+1 -0

@@ -6,6 +6,7 @@ Protocols: HTTP FTP SFTP FILE
	Category: http ftp sftp file
	Example: --range 22-44 $URL
	Added: 4.0
+	See-also: continue-at append
	---
	Retrieve a byte range (i.e. a partial document) from an HTTP/1.1, FTP or SFTP
	server or a local FILE. Ranges can be specified in a number of ways.

docs/cmdline-opts/raw.d+1 -0

@@ -4,6 +4,7 @@ Added: 7.16.2
	Protocols: HTTP
	Category: http
	Example: --raw $URL
+	See-also: tr-encoding
	---
	When used, it disables all internal HTTP decoding of content or transfer
	encodings and instead makes them passed on unaltered, raw.

docs/cmdline-opts/remote-header-name.d+1 -0

@@ -5,6 +5,7 @@ Help: Use the header-provided filename
	Category: output
	Example: -OJ https://example.com/file
	Added: 7.20.0
+	See-also: remote-name
	---
	This option tells the --remote-name option to use the server-specified
	Content-Disposition filename instead of extracting a filename from the URL.

docs/cmdline-opts/remote-name-all.d+1 -0

@@ -3,6 +3,7 @@ Help: Use the remote file name for all URLs
	Added: 7.19.0
	Category: output
	Example: --remote-name-all ftp://example.com/file1 ftp://example.com/file2
+	See-also: remote-name
	---
	This option changes the default action for all given URLs to be dealt with as
	if --remote-name were used for each one. So if you want to disable that for a

docs/cmdline-opts/remote-name.d+1 -0

@@ -4,6 +4,7 @@ Help: Write output to a file named as the remote file
	Category: important output
	Example: -O https://example.com/filename
	Added: 4.0
+	See-also: remote-name-all
	---
	Write output to a local file named like the remote file we get. (Only the file
	part of the remote file is used, the path is cut off.)

docs/cmdline-opts/remote-time.d+1 -0

@@ -4,6 +4,7 @@ Help: Set the remote file's time on the local output
	Category: output
	Example: --remote-time -o foo $URL
	Added: 7.9
+	See-also: remote-name time-cond
	---
	When used, this will make curl attempt to figure out the timestamp of the
	remote file, and if that is available make the local file get that same

docs/cmdline-opts/request-target.d+1 -0

@@ -5,6 +5,7 @@ Protocols: HTTP
	Added: 7.55.0
	Category: http
	Example: --request-target "*" -X OPTIONS $URL
+	See-also: request
	---
	Tells curl to use an alternative "target" (path) instead of using the path as
	provided in the URL. Particularly useful when wanting to issue HTTP requests

docs/cmdline-opts/request.d+1 -0

@@ -6,6 +6,7 @@ Category: connection
	Example: -X "DELETE" $URL
	Example: -X NLST ftp://example.com/
	Added: 6.0
+	See-also: request-target
	---
	(HTTP) Specifies a custom request method to use when communicating with the
	HTTP server. The specified request method will be used instead of the method

docs/cmdline-opts/resolve.d+1 -0

@@ -4,6 +4,7 @@ Help: Resolve the host+port to this address
	Added: 7.21.3
	Category: connection
	Example: --resolve example.com:443:127.0.0.1 $URL
+	See-also: connect-to alt-svc
	---
	Provide a custom address for a specific host and port pair. Using this, you
	can make the curl requests(s) use a specified address and prevent the

docs/cmdline-opts/retry-all-errors.d+1 -0

@@ -3,6 +3,7 @@ Help: Retry all errors (use with --retry)
	Added: 7.71.0
	Category: curl
	Example: --retry-all-errors $URL
+	See-also: retry
	---
	Retry on any error. This option is used together with --retry.

docs/cmdline-opts/retry-connrefused.d+1 -0

@@ -3,6 +3,7 @@ Help: Retry on connection refused (use with --retry)
	Added: 7.52.0
	Category: curl
	Example: --retry-connrefused --retry $URL
+	See-also: retry retry-all-errors
	---
	In addition to the other conditions, consider ECONNREFUSED as a transient
	error too for --retry. This option is used together with --retry.

docs/cmdline-opts/retry-delay.d+1 -0

@@ -4,6 +4,7 @@ Help: Wait time between retries
	Added: 7.12.3
	Category: curl
	Example: --retry-delay 5 --retry $URL
+	See-also: retry
	---
	Make curl sleep this amount of time before each retry when a transfer has
	failed with a transient error (it changes the default backoff time algorithm

docs/cmdline-opts/retry-max-time.d+1 -0

@@ -4,6 +4,7 @@ Help: Retry only within this period
	Added: 7.12.3
	Category: curl
	Example: --retry-max-time 30 --retry 10 $URL
+	See-also: retry
	---
	The retry timer is reset before the first transfer attempt. Retries will be
	done as usual (see --retry) as long as the timer has not reached this given

docs/cmdline-opts/retry.d+1 -0

@@ -4,6 +4,7 @@ Added: 7.12.3
	Help: Retry request if transient problems occur
	Category: curl
	Example: --retry 7 $URL
+	See-also: retry-max-time
	---
	If a transient error is returned when curl tries to perform a transfer, it
	will retry this number of times before giving up. Setting the number to 0

docs/cmdline-opts/sasl-authzid.d+1 -0

@@ -4,6 +4,7 @@ Help: Identity for SASL PLAIN authentication
	Added: 7.66.0
	Category: auth
	Example: --sasl-authzid zid imap://example.com/
+	See-also: login-options
	---
	Use this authorisation identity (authzid), during SASL PLAIN authentication,
	in addition to the authentication identity (authcid) as specified by --user.

docs/cmdline-opts/sasl-ir.d+1 -0

@@ -3,5 +3,6 @@ Help: Enable initial response in SASL authentication
	Added: 7.31.0
	Category: auth
	Example: --sasl-ir imap://example.com/
+	See-also: sasl-authzid
	---
	Enable initial response in SASL authentication.

docs/cmdline-opts/service-name.d+1 -0

@@ -4,6 +4,7 @@ Arg: <name>
	Added: 7.43.0
	Category: misc
	Example: --service-name sockd/server $URL
+	See-also: negotiate proxy-service-name
	---
	This option allows you to change the service name for SPNEGO.

docs/cmdline-opts/socks4.d+1 -0

@@ -4,6 +4,7 @@ Help: SOCKS4 proxy on given host + port
	Added: 7.15.2
	Category: proxy
	Example: --socks4 hostname:4096 $URL
+	See-also: socks4a socks5 socks5-hostname
	---
	Use the specified SOCKS4 proxy. If the port number is not specified, it is
	assumed at port 1080. Using this socket type make curl resolve the host name

docs/cmdline-opts/socks4a.d+1 -0

@@ -4,6 +4,7 @@ Help: SOCKS4a proxy on given host + port
	Added: 7.18.0
	Category: proxy
	Example: --socks4a hostname:4096 $URL
+	See-also: socks4 socks5 socks5-hostname
	---
	Use the specified SOCKS4a proxy. If the port number is not specified, it is
	assumed at port 1080. This asks the proxy to resolve the host name.

docs/cmdline-opts/socks5-basic.d+1 -0

@@ -3,6 +3,7 @@ Help: Enable username/password auth for SOCKS5 proxies
	Added: 7.55.0
	Category: proxy auth
	Example: --socks5-basic --socks5 hostname:4096 $URL
+	See-also: socks5
	---
	Tells curl to use username/password authentication when connecting to a SOCKS5
	proxy. The username/password authentication is enabled by default. Use

docs/cmdline-opts/socks5-gssapi-nec.d+1 -0

@@ -3,6 +3,7 @@ Help: Compatibility with NEC SOCKS5 server
	Added: 7.19.4
	Category: proxy auth
	Example: --socks5-gssapi-nec --socks5 hostname:4096 $URL
+	See-also: socks5
	---
	As part of the GSS-API negotiation a protection mode is negotiated. RFC 1961
	says in section 4.3/4.4 it should be protected, but the NEC reference

docs/cmdline-opts/socks5-gssapi-service.d+1 -0

@@ -4,6 +4,7 @@ Help: SOCKS5 proxy service name for GSS-API
	Added: 7.19.4
	Category: proxy auth
	Example: --socks5-gssapi-service sockd --socks5 hostname:4096 $URL
+	See-also: socks5
	---
	The default service name for a socks server is rcmd/server-fqdn. This option
	allows you to change it.

docs/cmdline-opts/socks5-gssapi.d+1 -0

@@ -3,6 +3,7 @@ Help: Enable GSS-API auth for SOCKS5 proxies
	Added: 7.55.0
	Category: proxy auth
	Example: --socks5-gssapi --socks5 hostname:4096 $URL
+	See-also: socks5
	---
	Tells curl to use GSS-API authentication when connecting to a SOCKS5 proxy.
	The GSS-API authentication is enabled by default (if curl is compiled with

docs/cmdline-opts/socks5-hostname.d+1 -0

@@ -4,6 +4,7 @@ Help: SOCKS5 proxy, pass host name to proxy
	Added: 7.18.0
	Category: proxy
	Example: --socks5-hostname proxy.example:7000 $URL
+	See-also: socks5 socks4a
	---
	Use the specified SOCKS5 proxy (and let the proxy resolve the host name). If
	the port number is not specified, it is assumed at port 1080.

docs/cmdline-opts/socks5.d+1 -0

@@ -4,6 +4,7 @@ Help: SOCKS5 proxy on given host + port
	Added: 7.18.0
	Category: proxy
	Example: --socks5 proxy.example:7000 $URL
+	See-also: socks5-hostname socks4a
	---
	Use the specified SOCKS5 proxy - but resolve the host name locally. If the
	port number is not specified, it is assumed at port 1080.

docs/cmdline-opts/speed-limit.d+1 -0

@@ -5,6 +5,7 @@ Help: Stop transfers slower than this
	Category: connection
	Example: --speed-limit 300 --speed-time 10 $URL
	Added: 4.7
+	See-also: speed-time limit-rate max-time
	---
	If a download is slower than this given speed (in bytes per second) for
	speed-time seconds it gets aborted. speed-time is set with --speed-time and is

docs/cmdline-opts/speed-time.d+1 -0

@@ -5,6 +5,7 @@ Help: Trigger 'speed-limit' abort after this time
	Category: connection
	Example: --speed-limit 300 --speed-time 10 $URL
	Added: 4.7
+	See-also: speed-limit limit-rate
	---
	If a download is slower than speed-limit bytes per second during a speed-time
	period, the download gets aborted. If speed-time is used, the default

docs/cmdline-opts/ssl-allow-beast.d+1 -0

@@ -3,6 +3,7 @@ Help: Allow security flaw to improve interop
	Added: 7.25.0
	Category: tls
	Example: --ssl-allow-beast $URL
+	See-also: proxy-ssl-allow-beast insecure
	---
	This option tells curl to not work around a security flaw in the SSL3 and
	TLS1.0 protocols known as BEAST. If this option is not used, the SSL layer

docs/cmdline-opts/ssl-no-revoke.d+1 -0

@@ -3,6 +3,7 @@ Help: Disable cert revocation checks (Schannel)
	Added: 7.44.0
	Category: tls
	Example: --ssl-no-revoke $URL
+	See-also: crlfile
	---
	(Schannel) This option tells curl to disable certificate revocation checks.
	WARNING: this option loosens the SSL security, and by using this flag you ask

docs/cmdline-opts/ssl-reqd.d+1 -0

@@ -4,6 +4,7 @@ Protocols: FTP IMAP POP3 SMTP
	Added: 7.20.0
	Category: tls
	Example: --ssl-reqd ftp://example.com
+	See-also: ssl insecure
	---
	Require SSL/TLS for the connection. Terminates the connection if the server
	does not support SSL/TLS.

docs/cmdline-opts/ssl-revoke-best-effort.d+1 -0

@@ -3,6 +3,7 @@ Help: Ignore missing/offline cert CRL dist points
	Added: 7.70.0
	Category: tls
	Example: --ssl-revoke-best-effort $URL
+	See-also: crlfile insecure
	---
	(Schannel) This option tells curl to ignore certificate revocation checks when
	they failed due to missing/offline distribution points for the revocation check

docs/cmdline-opts/ssl.d+1 -0

@@ -4,6 +4,7 @@ Protocols: FTP IMAP POP3 SMTP
	Added: 7.20.0
	Category: tls
	Example: --ssl pop3://example.com/
+	See-also: insecure ciphers
	---
	Try to use SSL/TLS for the connection. Reverts to a non-secure connection if
	the server does not support SSL/TLS. See also --ftp-ssl-control and --ssl-reqd

docs/cmdline-opts/styled-output.d+1 -0

@@ -3,6 +3,7 @@ Help: Enable styled output for HTTP headers
	Added: 7.61.0
	Category: verbose
	Example: --styled-output -I $URL
+	See-also: head verbose
	---
	Enables the automatic use of bold font styles when writing HTTP headers to the
	terminal. Use --no-styled-output to switch them off.

docs/cmdline-opts/tcp-fastopen.d+1 -0

@@ -3,5 +3,6 @@ Added: 7.49.0
	Help: Use TCP Fast Open
	Category: connection
	Example: --tcp-fastopen $URL
+	See-also: false-start
	---
	Enable use of TCP Fast Open (RFC7413).

docs/cmdline-opts/tcp-nodelay.d+1 -0

@@ -3,6 +3,7 @@ Help: Use the TCP_NODELAY option
	Added: 7.11.2
	Category: connection
	Example: --tcp-nodelay $URL
+	See-also: no-buffer
	---
	Turn on the TCP_NODELAY option. See the curl_easy_setopt(3) man page for
	details about this option.

docs/cmdline-opts/telnet-option.d+1 -0

@@ -5,6 +5,7 @@ Help: Set telnet option
	Category: telnet
	Example: -t TTYPE=vt100 telnet://example.com/
	Added: 7.7
+	See-also: config
	---
	Pass options to the telnet protocol. Supported options are:

docs/cmdline-opts/tftp-blksize.d+1 -0

@@ -5,6 +5,7 @@ Protocols: TFTP
	Added: 7.20.0
	Category: tftp
	Example: --tftp-blksize 1024 tftp://example.com/file
+	See-also: tftp-no-options
	---
	Set TFTP BLKSIZE option (must be >512). This is the block size that curl will
	try to use when transferring data to or from a TFTP server. By default 512

docs/cmdline-opts/tftp-no-options.d+1 -0

@@ -4,6 +4,7 @@ Protocols: TFTP
	Added: 7.48.0
	Category: tftp
	Example: --tftp-no-options tftp://192.168.0.1/
+	See-also: tftp-blksize
	---
	Tells curl not to send TFTP options requests.

docs/cmdline-opts/time-cond.d+1 -0

@@ -8,6 +8,7 @@ Example: -z "Wed 01 Sep 2021 12:18:00" $URL
	Example: -z "-Wed 01 Sep 2021 12:18:00" $URL
	Example: -z file $URL
	Added: 5.8
+	See-also: etag-compare remote-time
	---
	Request a file that has been modified later than the given time and date, or
	one that has been modified before that time. The <date expression> can be all

docs/cmdline-opts/tls13-ciphers.d+1 -0

@@ -5,6 +5,7 @@ Protocols: TLS
	Category: tls
	Example: --tls13-ciphers TLS_AES_128_GCM_SHA256 $URL
	Added: 7.61.0
+	See-also: ciphers curves
	---
	Specifies which cipher suites to use in the connection if it negotiates TLS
	1.3. The list of ciphers suites must specify valid ciphers. Read up on TLS 1.3

docs/cmdline-opts/tlsauthtype.d+1 -0

@@ -4,6 +4,7 @@ Help: TLS authentication type
	Added: 7.21.4
	Category: tls auth
	Example: --tlsauthtype SRP $URL
+	See-also: tlsuser
	---
	Set TLS authentication type. Currently, the only supported option is "SRP",
	for TLS-SRP (RFC 5054). If --tlsuser and --tlspassword are specified but

docs/cmdline-opts/tlspassword.d+1 -0

@@ -4,6 +4,7 @@ Help: TLS password
	Added: 7.21.4
	Category: tls auth
	Example: --tlspassword pwd --tlsuser user $URL
+	See-also: tlsuser
	---
	Set password for use with the TLS authentication method specified with
	--tlsauthtype. Requires that --tlsuser also be set.

docs/cmdline-opts/tlsuser.d+1 -0

@@ -4,6 +4,7 @@ Help: TLS user name
	Added: 7.21.4
	Category: tls auth
	Example: --tlspassword pwd --tlsuser user $URL
+	See-also: tlspassword
	---
	Set username for use with the TLS authentication method specified with
	--tlsauthtype. Requires that --tlspassword also is set.

docs/cmdline-opts/tlsv1.0.d+1 -0

@@ -4,6 +4,7 @@ Protocols: TLS
	Added: 7.34.0
	Category: tls
	Example: --tlsv1.0 $URL
+	See-also: tlsv1.3
	---
	Forces curl to use TLS version 1.0 or later when connecting to a remote TLS server.

docs/cmdline-opts/tlsv1.1.d+1 -0

@@ -4,6 +4,7 @@ Protocols: TLS
	Added: 7.34.0
	Category: tls
	Example: --tlsv1.1 $URL
+	See-also: tlsv1.3
	---
	Forces curl to use TLS version 1.1 or later when connecting to a remote TLS server.

docs/cmdline-opts/tlsv1.2.d+1 -0

@@ -4,6 +4,7 @@ Protocols: TLS
	Added: 7.34.0
	Category: tls
	Example: --tlsv1.2 $URL
+	See-also: tlsv1.3
	---
	Forces curl to use TLS version 1.2 or later when connecting to a remote TLS server.

docs/cmdline-opts/tlsv1.3.d+1 -0

@@ -4,6 +4,7 @@ Protocols: TLS
	Added: 7.52.0
	Category: tls
	Example: --tlsv1.3 $URL
+	See-also: tlsv1.2
	---
	Forces curl to use TLS version 1.3 or later when connecting to a remote TLS
	server.

docs/cmdline-opts/tr-encoding.d+1 -0

@@ -4,6 +4,7 @@ Help: Request compressed transfer encoding
	Protocols: HTTP
	Category: http
	Example: --tr-encoding $URL
+	See-also: compressed
	---
	Request a compressed Transfer-Encoding response using one of the algorithms
	curl supports, and uncompress the data while receiving it.

docs/cmdline-opts/trace-ascii.d+1 -0

@@ -5,6 +5,7 @@ Mutexed: trace verbose
	Category: verbose
	Example: --trace-ascii log.txt $URL
	Added: 7.9.7
+	See-also: verbose trace
	---
	Enables a full trace dump of all incoming and outgoing data, including
	descriptive information, to the given output file. Use "-" as filename to have

docs/cmdline-opts/trace-time.d+1 -0

@@ -3,6 +3,7 @@ Help: Add time stamps to trace/verbose output
	Added: 7.14.0
	Category: verbose
	Example: --trace-time --trace-ascii output $URL
+	See-also: trace verbose
	---
	Prepends a time stamp to each trace or verbose line that curl displays.

docs/cmdline-opts/trace.d+1 -0

@@ -5,6 +5,7 @@ Mutexed: verbose trace-ascii
	Category: verbose
	Example: --trace log.txt $URL
	Added: 7.9.7
+	See-also: trace-ascii trace-time
	---
	Enables a full trace dump of all incoming and outgoing data, including
	descriptive information, to the given output file. Use "-" as filename to have

docs/cmdline-opts/unix-socket.d+1 -0

@@ -4,6 +4,7 @@ Help: Connect through this Unix domain socket
	Added: 7.40.0
	Protocols: HTTP
	Category: connection
+	See-also: abstract-unix-socket
	Example: --unix-socket socket-path $URL
	---
	Connect through this Unix domain socket, instead of using the network.

docs/cmdline-opts/upload-file.d+1 -0

@@ -7,6 +7,7 @@ Example: -T file $URL
	Example: -T "img[1-1000].png" ftp://ftp.example.com/
	Example: --upload-file "{file1,file2}" $URL
	Added: 4.0
+	See-also: get head
	---
	This transfers the specified local file to the remote URL. If there is no file
	part in the specified URL, curl will append the local file name. NOTE that you

docs/cmdline-opts/url.d+1 -0

@@ -4,6 +4,7 @@ Help: URL to work with
	Category: curl
	Example: --url $URL
	Added: 7.5
+	See-also: next config
	---
	Specify a URL to fetch. This option is mostly handy when you want to specify
	URL(s) in a config file.

docs/cmdline-opts/use-ascii.d+1 -0

@@ -5,6 +5,7 @@ Protocols: FTP LDAP
	Category: misc
	Example: -B ftp://example.com/README
	Added: 5.0
+	See-also: crlf data-ascii
	---
	Enable ASCII transfer. For FTP, this can also be enforced by using a URL that
	ends with ";type=A". This option causes data sent to stdout to be in text mode

docs/cmdline-opts/user-agent.d+1 -0

@@ -6,6 +6,7 @@ Protocols: HTTP
	Category: important http
	Example: -A "Agent 007" $URL
	Added: 4.5.1
+	See-also: header proxy-header
	---
	Specify the User-Agent string to send to the HTTP server. To encode blanks in
	the string, surround the string with single quote marks. This header can also

docs/cmdline-opts/user.d+1 -0

@@ -5,6 +5,7 @@ Help: Server user and password
	Category: important auth
	Example: -u user:secret $URL
	Added: 4.0
+	See-also: netrc config
	---
	Specify the user name and password to use for server authentication. Overrides
	--netrc and --netrc-optional.

docs/cmdline-opts/version.d+1 -0

@@ -4,6 +4,7 @@ Help: Show version number and quit
	Category: important curl
	Example: --version
	Added: 4.0
+	See-also: help manual
	---
	Displays information about curl and the libcurl version it uses.

docs/cmdline-opts/write-out.d+1 -0

@@ -5,6 +5,7 @@ Help: Use output FORMAT after completion
	Category: verbose
	Example: -w '%{http_code}\\n' $URL
	Added: 6.5
+	See-also: verbose head
	---
	Make curl display information on stdout after a completed transfer. The format
	is a string that may contain plain text mixed with any number of

docs/cmdline-opts/xattr.d+1 -0

@@ -3,6 +3,7 @@ Help: Store metadata in extended file attributes
	Category: misc
	Example: --xattr -o storage $URL
	Added: 7.21.3
+	See-also: remote-time write-out verbose
	---
	When saving output to a file, this option tells curl to store certain file
	metadata in extended file attributes. Currently, the URL is stored in the