pytest: remove 'repeat' parameter
—
$ git checkout -f ef3d7877d563bbc73e2cc0ccdbdea2b32960057b
Previous HEAD position was 25b445e479 TLS: check connection for SSL use, not handler
HEAD is now at ef3d7877d5 pytest: remove 'repeat' parameter
$ git clean -fdx
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing buildinfo.txt
Removing compile
Removing config.guess
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing curl-config
Removing depcomp
Removing docs/Makefile
Removing docs/Makefile.in
Removing docs/cmdline-opts/Makefile
Removing docs/cmdline-opts/Makefile.in
Removing docs/examples/.deps/
Removing docs/examples/Makefile
Removing docs/examples/Makefile.in
Removing docs/libcurl/Makefile
Removing docs/libcurl/Makefile.in
Removing docs/libcurl/opts/Makefile
Removing docs/libcurl/opts/Makefile.in
Removing include/Makefile
Removing include/Makefile.in
Removing include/curl/Makefile
Removing include/curl/Makefile.in
Removing install-sh
Removing lib/.deps/
Removing lib/.dirstamp
Removing lib/.libs/
Removing lib/Makefile
Removing lib/Makefile.in
Removing lib/base64.o
Removing lib/curl_config.h
Removing lib/curl_config.h.in
Removing lib/curl_get_line.o
Removing lib/curl_multibyte.o
Removing lib/dynbuf.o
Removing lib/libcurl.la
Removing lib/libcurl.vers
Removing lib/libcurl_la-altsvc.lo
Removing lib/libcurl_la-altsvc.o
Removing lib/libcurl_la-amigaos.lo
Removing lib/libcurl_la-amigaos.o
Removing lib/libcurl_la-asyn-ares.lo
Removing lib/libcurl_la-asyn-ares.o
Removing lib/libcurl_la-asyn-thread.lo
Removing lib/libcurl_la-asyn-thread.o
Removing lib/libcurl_la-base64.lo
Removing lib/libcurl_la-base64.o
Removing lib/libcurl_la-bufq.lo
Removing lib/libcurl_la-bufq.o
Removing lib/libcurl_la-bufref.lo
Removing lib/libcurl_la-bufref.o
Removing lib/libcurl_la-cf-h1-proxy.lo
Removing lib/libcurl_la-cf-h1-proxy.o
Removing lib/libcurl_la-cf-h2-proxy.lo
Removing lib/libcurl_la-cf-h2-proxy.o
Removing lib/libcurl_la-cf-haproxy.lo
Removing lib/libcurl_la-cf-haproxy.o
Removing lib/libcurl_la-cf-https-connect.lo
Removing lib/libcurl_la-cf-https-connect.o
Removing lib/libcurl_la-cf-socket.lo
Removing lib/libcurl_la-cf-socket.o
Removing lib/libcurl_la-cfilters.lo
Removing lib/libcurl_la-cfilters.o
Removing lib/libcurl_la-conncache.lo
Removing lib/libcurl_la-conncache.o
Removing lib/libcurl_la-connect.lo
Removing lib/libcurl_la-connect.o
Removing lib/libcurl_la-content_encoding.lo
Removing lib/libcurl_la-content_encoding.o
Removing lib/libcurl_la-cookie.lo
Removing lib/libcurl_la-cookie.o
Removing lib/libcurl_la-curl_addrinfo.lo
Removing lib/libcurl_la-curl_addrinfo.o
Removing lib/libcurl_la-curl_des.lo
Removing lib/libcurl_la-curl_des.o
Removing lib/libcurl_la-curl_endian.lo
Removing lib/libcurl_la-curl_endian.o
Removing lib/libcurl_la-curl_fnmatch.lo
Removing lib/libcurl_la-curl_fnmatch.o
Removing lib/libcurl_la-curl_get_line.lo
Removing lib/libcurl_la-curl_get_line.o
Removing lib/libcurl_la-curl_gethostname.lo
Removing lib/libcurl_la-curl_gethostname.o
Removing lib/libcurl_la-curl_gssapi.lo
Removing lib/libcurl_la-curl_gssapi.o
Removing lib/libcurl_la-curl_memrchr.lo
Removing lib/libcurl_la-curl_memrchr.o
Removing lib/libcurl_la-curl_multibyte.lo
Removing lib/libcurl_la-curl_multibyte.o
Removing lib/libcurl_la-curl_ntlm_core.lo
Removing lib/libcurl_la-curl_ntlm_core.o
Removing lib/libcurl_la-curl_range.lo
Removing lib/libcurl_la-curl_range.o
Removing lib/libcurl_la-curl_rtmp.lo
Removing lib/libcurl_la-curl_rtmp.o
Removing lib/libcurl_la-curl_sasl.lo
Removing lib/libcurl_la-curl_sasl.o
Removing lib/libcurl_la-curl_sha512_256.lo
Removing lib/libcurl_la-curl_sha512_256.o
Removing lib/libcurl_la-curl_sspi.lo
Removing lib/libcurl_la-curl_sspi.o
Removing lib/libcurl_la-curl_threads.lo
Removing lib/libcurl_la-curl_threads.o
Removing lib/libcurl_la-curl_trc.lo
Removing lib/libcurl_la-curl_trc.o
Removing lib/libcurl_la-cw-out.lo
Removing lib/libcurl_la-cw-out.o
Removing lib/libcurl_la-dict.lo
Removing lib/libcurl_la-dict.o
Removing lib/libcurl_la-dllmain.lo
Removing lib/libcurl_la-dllmain.o
Removing lib/libcurl_la-doh.lo
Removing lib/libcurl_la-doh.o
Removing lib/libcurl_la-dynbuf.lo
Removing lib/libcurl_la-dynbuf.o
Removing lib/libcurl_la-dynhds.lo
Removing lib/libcurl_la-dynhds.o
Removing lib/libcurl_la-easy.lo
Removing lib/libcurl_la-easy.o
Removing lib/libcurl_la-easygetopt.lo
Removing lib/libcurl_la-easygetopt.o
Removing lib/libcurl_la-easyoptions.lo
Removing lib/libcurl_la-easyoptions.o
Removing lib/libcurl_la-escape.lo
Removing lib/libcurl_la-escape.o
Removing lib/libcurl_la-file.lo
Removing lib/libcurl_la-file.o
Removing lib/libcurl_la-fileinfo.lo
Removing lib/libcurl_la-fileinfo.o
Removing lib/libcurl_la-fopen.lo
Removing lib/libcurl_la-fopen.o
Removing lib/libcurl_la-formdata.lo
Removing lib/libcurl_la-formdata.o
Removing lib/libcurl_la-ftp.lo
Removing lib/libcurl_la-ftp.o
Removing lib/libcurl_la-ftplistparser.lo
Removing lib/libcurl_la-ftplistparser.o
Removing lib/libcurl_la-getenv.lo
Removing lib/libcurl_la-getenv.o
Removing lib/libcurl_la-getinfo.lo
Removing lib/libcurl_la-getinfo.o
Removing lib/libcurl_la-gopher.lo
Removing lib/libcurl_la-gopher.o
Removing lib/libcurl_la-hash.lo
Removing lib/libcurl_la-hash.o
Removing lib/libcurl_la-headers.lo
Removing lib/libcurl_la-headers.o
Removing lib/libcurl_la-hmac.lo
Removing lib/libcurl_la-hmac.o
Removing lib/libcurl_la-hostasyn.lo
Removing lib/libcurl_la-hostasyn.o
Removing lib/libcurl_la-hostip.lo
Removing lib/libcurl_la-hostip.o
Removing lib/libcurl_la-hostip4.lo
Removing lib/libcurl_la-hostip4.o
Removing lib/libcurl_la-hostip6.lo
Removing lib/libcurl_la-hostip6.o
Removing lib/libcurl_la-hostsyn.lo
Removing lib/libcurl_la-hostsyn.o
Removing lib/libcurl_la-hsts.lo
Removing lib/libcurl_la-hsts.o
Removing lib/libcurl_la-http.lo
Removing lib/libcurl_la-http.o
Removing lib/libcurl_la-http1.lo
Removing lib/libcurl_la-http1.o
Removing lib/libcurl_la-http2.lo
Removing lib/libcurl_la-http2.o
Removing lib/libcurl_la-http_aws_sigv4.lo
Removing lib/libcurl_la-http_aws_sigv4.o
Removing lib/libcurl_la-http_chunks.lo
Removing lib/libcurl_la-http_chunks.o
Removing lib/libcurl_la-http_digest.lo
Removing lib/libcurl_la-http_digest.o
Removing lib/libcurl_la-http_negotiate.lo
Removing lib/libcurl_la-http_negotiate.o
Removing lib/libcurl_la-http_ntlm.lo
Removing lib/libcurl_la-http_ntlm.o
Removing lib/libcurl_la-http_proxy.lo
Removing lib/libcurl_la-http_proxy.o
Removing lib/libcurl_la-idn.lo
Removing lib/libcurl_la-idn.o
Removing lib/libcurl_la-if2ip.lo
Removing lib/libcurl_la-if2ip.o
Removing lib/libcurl_la-imap.lo
Removing lib/libcurl_la-imap.o
Removing lib/libcurl_la-inet_ntop.lo
Removing lib/libcurl_la-inet_ntop.o
Removing lib/libcurl_la-inet_pton.lo
Removing lib/libcurl_la-inet_pton.o
Removing lib/libcurl_la-krb5.lo
Removing lib/libcurl_la-krb5.o
Removing lib/libcurl_la-ldap.lo
Removing lib/libcurl_la-ldap.o
Removing lib/libcurl_la-llist.lo
Removing lib/libcurl_la-llist.o
Removing lib/libcurl_la-macos.lo
Removing lib/libcurl_la-macos.o
Removing lib/libcurl_la-md4.lo
Removing lib/libcurl_la-md4.o
Removing lib/libcurl_la-md5.lo
Removing lib/libcurl_la-md5.o
Removing lib/libcurl_la-memdebug.lo
Removing lib/libcurl_la-memdebug.o
Removing lib/libcurl_la-mime.lo
Removing lib/libcurl_la-mime.o
Removing lib/libcurl_la-mprintf.lo
Removing lib/libcurl_la-mprintf.o
Removing lib/libcurl_la-mqtt.lo
Removing lib/libcurl_la-mqtt.o
Removing lib/libcurl_la-multi.lo
Removing lib/libcurl_la-multi.o
Removing lib/libcurl_la-netrc.lo
Removing lib/libcurl_la-netrc.o
Removing lib/libcurl_la-nonblock.lo
Removing lib/libcurl_la-nonblock.o
Removing lib/libcurl_la-noproxy.lo
Removing lib/libcurl_la-noproxy.o
Removing lib/libcurl_la-openldap.lo
Removing lib/libcurl_la-openldap.o
Removing lib/libcurl_la-parsedate.lo
Removing lib/libcurl_la-parsedate.o
Removing lib/libcurl_la-pingpong.lo
Removing lib/libcurl_la-pingpong.o
Removing lib/libcurl_la-pop3.lo
Removing lib/libcurl_la-pop3.o
Removing lib/libcurl_la-progress.lo
Removing lib/libcurl_la-progress.o
Removing lib/libcurl_la-psl.lo
Removing lib/libcurl_la-psl.o
Removing lib/libcurl_la-rand.lo
Removing lib/libcurl_la-rand.o
Removing lib/libcurl_la-rename.lo
Removing lib/libcurl_la-rename.o
Removing lib/libcurl_la-request.lo
Removing lib/libcurl_la-request.o
Removing lib/libcurl_la-rtsp.lo
Removing lib/libcurl_la-rtsp.o
Removing lib/libcurl_la-select.lo
Removing lib/libcurl_la-select.o
Removing lib/libcurl_la-sendf.lo
Removing lib/libcurl_la-sendf.o
Removing lib/libcurl_la-setopt.lo
Removing lib/libcurl_la-setopt.o
Removing lib/libcurl_la-sha256.lo
Removing lib/libcurl_la-sha256.o
Removing lib/libcurl_la-share.lo
Removing lib/libcurl_la-share.o
Removing lib/libcurl_la-slist.lo
Removing lib/libcurl_la-slist.o
Removing lib/libcurl_la-smb.lo
Removing lib/libcurl_la-smb.o
Removing lib/libcurl_la-smtp.lo
Removing lib/libcurl_la-smtp.o
Removing lib/libcurl_la-socketpair.lo
Removing lib/libcurl_la-socketpair.o
Removing lib/libcurl_la-socks.lo
Removing lib/libcurl_la-socks.o
Removing lib/libcurl_la-socks_gssapi.lo
Removing lib/libcurl_la-socks_gssapi.o
Removing lib/libcurl_la-socks_sspi.lo
Removing lib/libcurl_la-socks_sspi.o
Removing lib/libcurl_la-speedcheck.lo
Removing lib/libcurl_la-speedcheck.o
Removing lib/libcurl_la-splay.lo
Removing lib/libcurl_la-splay.o
Removing lib/libcurl_la-strcase.lo
Removing lib/libcurl_la-strcase.o
Removing lib/libcurl_la-strdup.lo
Removing lib/libcurl_la-strdup.o
Removing lib/libcurl_la-strerror.lo
Removing lib/libcurl_la-strerror.o
Removing lib/libcurl_la-strparse.lo
Removing lib/libcurl_la-strparse.o
Removing lib/libcurl_la-strtok.lo
Removing lib/libcurl_la-strtok.o
Removing lib/libcurl_la-strtoofft.lo
Removing lib/libcurl_la-strtoofft.o
Removing lib/libcurl_la-system_win32.lo
Removing lib/libcurl_la-system_win32.o
Removing lib/libcurl_la-telnet.lo
Removing lib/libcurl_la-telnet.o
Removing lib/libcurl_la-tftp.lo
Removing lib/libcurl_la-tftp.o
Removing lib/libcurl_la-timediff.lo
Removing lib/libcurl_la-timediff.o
Removing lib/libcurl_la-timeval.lo
Removing lib/libcurl_la-timeval.o
Removing lib/libcurl_la-transfer.lo
Removing lib/libcurl_la-transfer.o
Removing lib/libcurl_la-url.lo
Removing lib/libcurl_la-url.o
Removing lib/libcurl_la-urlapi.lo
Removing lib/libcurl_la-urlapi.o
Removing lib/libcurl_la-version.lo
Removing lib/libcurl_la-version.o
Removing lib/libcurl_la-version_win32.lo
Removing lib/libcurl_la-version_win32.o
Removing lib/libcurl_la-warnless.lo
Removing lib/libcurl_la-warnless.o
Removing lib/libcurl_la-ws.lo
Removing lib/libcurl_la-ws.o
Removing lib/nonblock.o
Removing lib/stamp-h1
Removing lib/strtoofft.o
Removing lib/timediff.o
Removing lib/vauth/.deps/
Removing lib/vauth/.dirstamp
Removing lib/vauth/libcurl_la-cleartext.lo
Removing lib/vauth/libcurl_la-cleartext.o
Removing lib/vauth/libcurl_la-cram.lo
Removing lib/vauth/libcurl_la-cram.o
Removing lib/vauth/libcurl_la-digest.lo
Removing lib/vauth/libcurl_la-digest.o
Removing lib/vauth/libcurl_la-digest_sspi.lo
Removing lib/vauth/libcurl_la-digest_sspi.o
Removing lib/vauth/libcurl_la-gsasl.lo
Removing lib/vauth/libcurl_la-gsasl.o
Removing lib/vauth/libcurl_la-krb5_gssapi.lo
Removing lib/vauth/libcurl_la-krb5_gssapi.o
Removing lib/vauth/libcurl_la-krb5_sspi.lo
Removing lib/vauth/libcurl_la-krb5_sspi.o
Removing lib/vauth/libcurl_la-ntlm.lo
Removing lib/vauth/libcurl_la-ntlm.o
Removing lib/vauth/libcurl_la-ntlm_sspi.lo
Removing lib/vauth/libcurl_la-ntlm_sspi.o
Removing lib/vauth/libcurl_la-oauth2.lo
Removing lib/vauth/libcurl_la-oauth2.o
Removing lib/vauth/libcurl_la-spnego_gssapi.lo
Removing lib/vauth/libcurl_la-spnego_gssapi.o
Removing lib/vauth/libcurl_la-spnego_sspi.lo
Removing lib/vauth/libcurl_la-spnego_sspi.o
Removing lib/vauth/libcurl_la-vauth.lo
Removing lib/vauth/libcurl_la-vauth.o
Removing lib/version_win32.o
Removing lib/vquic/.deps/
Removing lib/vquic/.dirstamp
Removing lib/vquic/libcurl_la-curl_msh3.lo
Removing lib/vquic/libcurl_la-curl_msh3.o
Removing lib/vquic/libcurl_la-curl_ngtcp2.lo
Removing lib/vquic/libcurl_la-curl_ngtcp2.o
Removing lib/vquic/libcurl_la-curl_osslq.lo
Removing lib/vquic/libcurl_la-curl_osslq.o
Removing lib/vquic/libcurl_la-curl_quiche.lo
Removing lib/vquic/libcurl_la-curl_quiche.o
Removing lib/vquic/libcurl_la-vquic-tls.lo
Removing lib/vquic/libcurl_la-vquic-tls.o
Removing lib/vquic/libcurl_la-vquic.lo
Removing lib/vquic/libcurl_la-vquic.o
Removing lib/vssh/.deps/
Removing lib/vssh/.dirstamp
Removing lib/vssh/libcurl_la-curl_path.lo
Removing lib/vssh/libcurl_la-curl_path.o
Removing lib/vssh/libcurl_la-libssh.lo
Removing lib/vssh/libcurl_la-libssh.o
Removing lib/vssh/libcurl_la-libssh2.lo
Removing lib/vssh/libcurl_la-libssh2.o
Removing lib/vssh/libcurl_la-wolfssh.lo
Removing lib/vssh/libcurl_la-wolfssh.o
Removing lib/vtls/.deps/
Removing lib/vtls/.dirstamp
Removing lib/vtls/libcurl_la-bearssl.lo
Removing lib/vtls/libcurl_la-bearssl.o
Removing lib/vtls/libcurl_la-cipher_suite.lo
Removing lib/vtls/libcurl_la-cipher_suite.o
Removing lib/vtls/libcurl_la-gtls.lo
Removing lib/vtls/libcurl_la-gtls.o
Removing lib/vtls/libcurl_la-hostcheck.lo
Removing lib/vtls/libcurl_la-hostcheck.o
Removing lib/vtls/libcurl_la-keylog.lo
Removing lib/vtls/libcurl_la-keylog.o
Removing lib/vtls/libcurl_la-mbedtls.lo
Removing lib/vtls/libcurl_la-mbedtls.o
Removing lib/vtls/libcurl_la-mbedtls_threadlock.lo
Removing lib/vtls/libcurl_la-mbedtls_threadlock.o
Removing lib/vtls/libcurl_la-openssl.lo
Removing lib/vtls/libcurl_la-openssl.o
Removing lib/vtls/libcurl_la-rustls.lo
Removing lib/vtls/libcurl_la-rustls.o
Removing lib/vtls/libcurl_la-schannel.lo
Removing lib/vtls/libcurl_la-schannel.o
Removing lib/vtls/libcurl_la-schannel_verify.lo
Removing lib/vtls/libcurl_la-schannel_verify.o
Removing lib/vtls/libcurl_la-sectransp.lo
Removing lib/vtls/libcurl_la-sectransp.o
Removing lib/vtls/libcurl_la-vtls.lo
Removing lib/vtls/libcurl_la-vtls.o
Removing lib/vtls/libcurl_la-vtls_scache.lo
Removing lib/vtls/libcurl_la-vtls_scache.o
Removing lib/vtls/libcurl_la-vtls_spack.lo
Removing lib/vtls/libcurl_la-vtls_spack.o
Removing lib/vtls/libcurl_la-wolfssl.lo
Removing lib/vtls/libcurl_la-wolfssl.o
Removing lib/vtls/libcurl_la-x509asn1.lo
Removing lib/vtls/libcurl_la-x509asn1.o
Removing lib/warnless.o
Removing libcurl.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing packages/Makefile
Removing packages/Makefile.in
Removing packages/vms/Makefile
Removing packages/vms/Makefile.in
Removing scripts/Makefile
Removing scripts/Makefile.in
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/curl
Removing src/slist_wc.o
Removing src/terminal.o
Removing src/tool_bname.o
Removing src/tool_ca_embed.c
Removing src/tool_ca_embed.o
Removing src/tool_cb_dbg.o
Removing src/tool_cb_hdr.o
Removing src/tool_cb_prg.o
Removing src/tool_cb_rea.o
Removing src/tool_cb_see.o
Removing src/tool_cb_soc.o
Removing src/tool_cb_wrt.o
Removing src/tool_cfgable.o
Removing src/tool_dirhie.o
Removing src/tool_doswin.o
Removing src/tool_easysrc.o
Removing src/tool_filetime.o
Removing src/tool_findfile.o
Removing src/tool_formparse.o
Removing src/tool_getparam.o
Removing src/tool_getpass.o
Removing src/tool_help.o
Removing src/tool_helpers.o
Removing src/tool_hugehelp.c
Removing src/tool_hugehelp.o
Removing src/tool_ipfs.o
Removing src/tool_libinfo.o
Removing src/tool_listhelp.o
Removing src/tool_main.o
Removing src/tool_msgs.o
Removing src/tool_operate.o
Removing src/tool_operhlp.o
Removing src/tool_paramhlp.o
Removing src/tool_parsecfg.o
Removing src/tool_progress.o
Removing src/tool_setopt.o
Removing src/tool_sleep.o
Removing src/tool_ssls.o
Removing src/tool_stderr.o
Removing src/tool_strdup.o
Removing src/tool_urlglob.o
Removing src/tool_util.o
Removing src/tool_vms.o
Removing src/tool_writeout.o
Removing src/tool_writeout_json.o
Removing src/tool_xattr.o
Removing src/var.o
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/certs/Makefile
Removing tests/certs/Makefile.in
Removing tests/certs/scripts/Makefile
Removing tests/certs/scripts/Makefile.in
Removing tests/config
Removing tests/configurehelp.pm
Removing tests/data/Makefile
Removing tests/data/Makefile.in
Removing tests/http/Makefile
Removing tests/http/Makefile.in
Removing tests/http/clients/.deps/
Removing tests/http/clients/Makefile
Removing tests/http/clients/Makefile.in
Removing tests/http/config.ini
Removing tests/libtest/.deps/
Removing tests/libtest/Makefile
Removing tests/libtest/Makefile.in
Removing tests/server/.deps/
Removing tests/server/Makefile
Removing tests/server/Makefile.in
Removing tests/unit/.deps/
Removing tests/unit/Makefile
Removing tests/unit/Makefile.in
$ autoreconf -fi
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Remember to add 'LT_INIT' to configure.ac.
configure.ac:126: installing './compile'
configure.ac:422: installing './config.guess'
configure.ac:422: installing './config.sub'
configure.ac:126: installing './install-sh'
configure.ac:132: installing './missing'
docs/examples/Makefile.am: installing './depcomp'
$ bash -c find . -name config.guess -exec cp /usr/share/misc/config.guess {} \;
$ bash -c find . -name config.sub -exec cp /usr/share/misc/config.sub {} \;
$ chmod +x configure
$ ./configure --disable-shared --without-ssl --disable-docs
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable HTTPSRR support... no
checking whether to enable ECH support... no
checking whether to enable SSL session export support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... ccache gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether ccache gcc accepts -g... yes
checking for ccache gcc option to enable C11 features... none needed
checking whether ccache gcc understands -c and -o together... yes
checking how to run the C preprocessor... ccache gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of ccache gcc... gcc3
checking curl version... 8.12.0-DEV
checking for httpd... no
checking for apache2... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for nghttpx... no
checking for caddy... /usr/bin/caddy
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defined... no
checking if _THREAD_SAFE is actually needed... no
checking if _THREAD_SAFE is onwards defined... no
checking if _REENTRANT is already defined... no
checking if _REENTRANT is actually needed... no
checking if _REENTRANT is onwards defined... no
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking how to print strings... printf
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for fgrep... /usr/bin/grep -F
checking for ld used by ccache gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from ccache gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking for dlfcn.h... yes
checking for objdir... .libs
checking if ccache gcc supports -fno-rtti -fno-exceptions... no
checking for ccache gcc option to produce PIC... -fPIC -DPIC
checking if ccache gcc PIC flag -fPIC -DPIC works... yes
checking if ccache gcc static flag -static works... yes
checking if ccache gcc supports -c -o file.o... yes
checking if ccache gcc supports -c -o file.o... (cached) yes
checking whether the ccache gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether to build shared libraries with -version-info... yes
checking whether to build shared libraries with -no-undefined... no
checking whether to build shared libraries with -mimpure-text... no
checking whether to build shared libraries with PIC... yes
checking whether to build static libraries with PIC... yes
checking whether to build shared libraries only... no
checking whether to build static libraries only... yes
checking for windres... no
checking if cpp -P is needed... yes
checking if cpp -P works... yes
checking if compiler is DEC/Compaq/HP C... no
checking if compiler is HP-UX C... no
checking if compiler is IBM C... no
checking if compiler is Intel C... no
checking if compiler is clang... no
checking if compiler is GNU C... yes
checking compiler version... gcc '1100' (raw: '11')
checking if compiler is SunPro C... no
checking if compiler is Tiny C... no
checking whether build target is a native Windows one... no
checking if compiler accepts some basic options... yes
configure: compiler options added: -Werror-implicit-function-declaration
checking if compiler optimizer assumed setting might be used... yes
checking if compiler accepts optimizer enabling options... yes
configure: compiler options added: -O2
checking if compiler accepts strict warning options... yes
configure: compiler options added: -Wno-system-headers
checking if compiler halts on compilation errors... yes
checking if compiler halts on negative sized arrays... yes
checking if compiler halts on function prototype mismatch... yes
checking if compiler supports hiding library internal symbols... yes
checking whether build target supports Win32 crypto API... no
checking for good-to-use Darwin CFLAGS... no
checking whether to build libcurl and curl in "unity" mode... no
checking whether to build tests into single-binary bundles... no
checking whether to support http... yes
checking whether to support ftp... yes
checking whether to support file... yes
checking whether to support IPFS... yes
checking whether to support ldap... yes
checking whether to support ldaps... yes
checking whether to support rtsp... yes
checking whether to support proxies... yes
checking whether to support dict... yes
checking whether to support telnet... yes
checking whether to support tftp... yes
checking whether to support pop3... yes
checking whether to support imap... yes
checking whether to support smb... yes
checking whether to support smtp... yes
checking whether to support gopher... yes
checking whether to support mqtt... no
checking whether to provide built-in manual... yes
checking whether to build documentation... no
checking whether to enable generation of C code... yes
checking whether to use libgcc... no
checking if X/Open network library is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for raw monotonic clock_gettime... yes
checking for pkg-config... /usr/bin/pkg-config
checking for zlib options with pkg-config... found
checking for zlib.h... yes
configure: found both libz and libz.h header
checking for BrotliDecoderDecompress in -lbrotlidec... no
checking for brotli/decode.h... no
checking for ZSTD_createDStream in -lzstd... no
checking for zstd.h... no
checking for lber.h... no
checking for ldap.h... no
checking for ldap_ssl.h... no
checking for LDAP libraries... cannot find LDAP libraries
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... yes
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Secure Transport... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libpsl options with pkg-config... found
checking for psl_builtin in -lpsl... yes
checking for libpsl.h... yes
checking for library containing gsasl_init... no
checking for RTMP_Init in -lrtmp... no
checking whether versioned symbols are wanted... no
checking whether to build with libidn2... (assumed) yes
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libidn2 options with pkg-config... no
configure: IDN_LIBS: "-lidn2"
configure: IDN_LDFLAGS: ""
configure: IDN_CPPFLAGS: ""
configure: IDN_DIR: ""
checking if idn2_lookup_ul can be linked... no
checking for idn2.h... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libnghttp2 options with pkg-config... no
checking for nghttp2_session_get_stream_local_window_size in -lnghttp2... no
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for sys/select.h... yes
checking for sys/socket.h... yes
checking for sys/ioctl.h... yes
checking for unistd.h... (cached) yes
checking for arpa/inet.h... yes
checking for net/if.h... yes
checking for netinet/in.h... yes
checking for netinet/in6.h... no
checking for sys/un.h... yes
checking for linux/tcp.h... yes
checking for netinet/tcp.h... yes
checking for netinet/udp.h... yes
checking for netdb.h... yes
checking for sys/sockio.h... no
checking for sys/stat.h... (cached) yes
checking for sys/param.h... yes
checking for termios.h... yes
checking for termio.h... yes
checking for fcntl.h... yes
checking for io.h... no
checking for pwd.h... yes
checking for utime.h... yes
checking for sys/utime.h... no
checking for sys/poll.h... yes
checking for poll.h... yes
checking for sys/resource.h... yes
checking for libgen.h... yes
checking for locale.h... yes
checking for stdbool.h... yes
checking for sys/filio.h... no
checking for sys/eventfd.h... yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for struct timeval... yes
checking run-time libs availability... fine
checking size of size_t... 8
checking size of long... 8
checking size of int... 4
checking size of time_t... 8
checking size of off_t... 8
checking size of curl_off_t... 8
checking size of curl_socket_t... 4
checking for long long... yes
checking for ssize_t... yes
checking for bool... yes
checking for sa_family_t... yes
checking for suseconds_t... yes
checking if time_t is unsigned... no
checking for in_addr_t... yes
checking for struct sockaddr_storage... yes
checking for sys/select.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for select... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for recv... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for send... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for MSG_NOSIGNAL... yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking if alarm can be linked... yes
checking if alarm is prototyped... yes
checking if alarm is compilable... yes
checking if alarm usage allowed... yes
checking if alarm might be used... yes
checking for sys/types.h... (cached) yes
checking for strings.h... (cached) yes
checking for sys/types.h... (cached) yes
checking for libgen.h... (cached) yes
checking if basename can be linked... yes
checking if basename is prototyped... yes
checking if basename is compilable... yes
checking if basename usage allowed... yes
checking if basename might be used... yes
checking if closesocket can be linked... no
checking if closesocket might be used... no
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking if CloseSocket can be linked... no
checking if CloseSocket might be used... no
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking for fcntl.h... (cached) yes
checking if fcntl can be linked... yes
checking if fcntl is prototyped... yes
checking if fcntl is compilable... yes
checking if fcntl usage allowed... yes
checking if fcntl might be used... yes
checking if fcntl O_NONBLOCK is compilable... yes
checking if fcntl O_NONBLOCK usage allowed... yes
checking if fcntl O_NONBLOCK might be used... yes
checking whether build target is a native Windows one... (cached) no
checking for sys/types.h... (cached) yes
checking for netdb.h... (cached) yes
checking if freeaddrinfo can be linked... yes
checking if freeaddrinfo is prototyped... yes
checking if freeaddrinfo is compilable... yes
checking if freeaddrinfo usage allowed... yes
checking if freeaddrinfo might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/xattr.h... yes
checking if fsetxattr can be linked... yes
checking if fsetxattr is prototyped... yes
checking if fsetxattr takes 5 args.... yes
checking if fsetxattr is compilable... yes
checking if fsetxattr usage allowed... yes
checking if fsetxattr might be used... yes
checking if ftruncate can be linked... yes
checking if ftruncate is prototyped... yes
checking if ftruncate is compilable... yes
checking if ftruncate usage allowed... yes
checking if ftruncate might be used... yes
checking for sys/types.h... (cached) yes
checking if getaddrinfo can be linked... yes
checking if getaddrinfo is prototyped... yes
checking if getaddrinfo is compilable... yes
checking if getaddrinfo seems to work... yes
checking if getaddrinfo usage allowed... yes
checking if getaddrinfo might be used... yes
checking if getaddrinfo is threadsafe... yes
checking if gethostbyname_r can be linked... yes
checking if gethostbyname_r is prototyped... yes
checking if gethostbyname_r takes 3 args.... no
checking if gethostbyname_r takes 5 args.... no
checking if gethostbyname_r takes 6 args.... yes
checking if gethostbyname_r is compilable... yes
checking if gethostbyname_r usage allowed... yes
checking if gethostbyname_r might be used... yes
checking if gethostname can be linked... yes
checking if gethostname is prototyped... yes
checking if gethostname is compilable... yes
checking for gethostname arg 2 data type... size_t
checking if gethostname usage allowed... yes
checking if gethostname might be used... yes
checking if getpeername can be linked... yes
checking if getpeername is prototyped... yes
checking if getpeername is compilable... yes
checking if getpeername usage allowed... yes
checking if getpeername might be used... yes
checking if getsockname can be linked... yes
checking if getsockname is prototyped... yes
checking if getsockname is compilable... yes
checking if getsockname usage allowed... yes
checking if getsockname might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for netinet/in.h... (cached) yes
checking for ifaddrs.h... yes
checking if getifaddrs can be linked... yes
checking if getifaddrs is prototyped... yes
checking if getifaddrs is compilable... yes
checking if getifaddrs seems to work... yes
checking if getifaddrs usage allowed... yes
checking if getifaddrs might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking if gmtime_r can be linked... yes
checking if gmtime_r is prototyped... yes
checking if gmtime_r is compilable... yes
checking if gmtime_r seems to work... yes
checking if gmtime_r usage allowed... yes
checking if gmtime_r might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for netinet/in.h... (cached) yes
checking for arpa/inet.h... (cached) yes
checking if inet_ntop can be linked... yes
checking if inet_ntop is prototyped... yes
checking if inet_ntop is compilable... yes
checking if inet_ntop seems to work... yes
checking if inet_ntop usage allowed... yes
checking if inet_ntop might be used... yes
checking if inet_pton can be linked... yes
checking if inet_pton is prototyped... yes
checking if inet_pton is compilable... yes
checking if inet_pton seems to work... yes
checking if inet_pton usage allowed... yes
checking if inet_pton might be used... yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for sys/ioctl.h... (cached) yes
checking for stropts.h... no
checking if ioctl can be linked... yes
checking if ioctl is prototyped... yes
checking if ioctl is compilable... yes
checking if ioctl usage allowed... yes
checking if ioctl might be used... yes
checking if ioctl FIONBIO is compilable... yes
checking if ioctl FIONBIO usage allowed... yes
checking if ioctl FIONBIO might be used... yes
checking if ioctl SIOCGIFADDR is compilable... yes
checking if ioctl SIOCGIFADDR usage allowed... yes
checking if ioctl SIOCGIFADDR might be used... yes
checking if ioctlsocket can be linked... no
checking if ioctlsocket might be used... no
checking if IoctlSocket can be linked... no
checking if IoctlSocket might be used... no
checking if memrchr can be linked... yes
checking if memrchr is prototyped... yes
checking if memrchr is compilable... yes
checking if memrchr usage allowed... yes
checking if memrchr might be used... yes
checking for sys/types.h... (cached) yes
checking if sigaction can be linked... yes
checking if sigaction is prototyped... yes
checking if sigaction is compilable... yes
checking if sigaction usage allowed... yes
checking if sigaction might be used... yes
checking if siginterrupt can be linked... yes
checking if siginterrupt is prototyped... yes
checking if siginterrupt is compilable... yes
checking if siginterrupt usage allowed... yes
checking if siginterrupt might be used... yes
checking if signal can be linked... yes
checking if signal is prototyped... yes
checking if signal is compilable... yes
checking if signal usage allowed... yes
checking if signal might be used... yes
checking for sys/types.h... (cached) yes
checking if sigsetjmp can be linked... no
checking if sigsetjmp seems a macro... yes
checking if sigsetjmp is compilable... yes
checking if sigsetjmp usage allowed... yes
checking if sigsetjmp might be used... yes
checking if socket can be linked... yes
checking if socket is prototyped... yes
checking if socket is compilable... yes
checking if socket usage allowed... yes
checking if socket might be used... yes
checking if socketpair can be linked... yes
checking if socketpair is prototyped... yes
checking if socketpair is compilable... yes
checking if socketpair usage allowed... yes
checking if socketpair might be used... yes
checking if strdup can be linked... yes
checking if strdup is prototyped... yes
checking if strdup is compilable... yes
checking if strdup usage allowed... yes
checking if strdup might be used... yes
checking if strerror_r can be linked... yes
checking if strerror_r is prototyped... yes
checking if strerror_r is compilable... yes
checking if strerror_r is glibc like... yes
checking if strerror_r seems to work... yes
checking if strerror_r usage allowed... yes
checking if strerror_r might be used... yes
checking if strtok_r can be linked... yes
checking if strtok_r is prototyped... yes
checking if strtok_r is compilable... yes
checking if strtok_r usage allowed... yes
checking if strtok_r might be used... yes
checking if strtoll can be linked... yes
checking if strtoll is prototyped... yes
checking if strtoll is compilable... yes
checking if strtoll usage allowed... yes
checking if strtoll might be used... yes
checking for eventfd... yes
checking for fnmatch... yes
checking for geteuid... yes
checking for getpass_r... no
checking for getppid... yes
checking for getpwuid... yes
checking for getpwuid_r... yes
checking for getrlimit... yes
checking for gettimeofday... yes
checking for if_nametoindex... yes
checking for mach_absolute_time... no
checking for pipe... yes
checking for poll... yes
checking for sched_yield... yes
checking for sendmsg... yes
checking for sendmmsg... yes
checking for setlocale... yes
checking for setmode... no
checking for setrlimit... yes
checking for snprintf... yes
checking for utime... yes
checking for utimes... yes
checking if strcasecmp can be linked... yes
checking if strcasecmp is prototyped... yes
checking if strcasecmp is compilable... yes
checking if strcasecmp usage allowed... yes
checking if strcasecmp might be used... yes
checking if strcmpi can be linked... no
checking if strcmpi might be used... no
checking if stricmp can be linked... no
checking if stricmp might be used... no
checking for arc4random... no
checking for fseeko... yes
checking for ccache gcc options needed to detect all undeclared functions... none needed
checking whether fseeko is declared... yes
checking how to set a socket into non-blocking mode... fcntl O_NONBLOCK
checking for perl... /usr/bin/perl
checking whether to enable the threaded resolver... yes
checking whether to link macOS CoreFoundation, CoreServices, and SystemConfiguration frameworks... no
checking whether to use POSIX threads for threaded resolver... auto
checking for pthread.h... yes
checking for pthread_create... yes
checking for dirent.h... yes
checking for opendir... yes
checking convert -I options to -isystem... yes
checking whether to enable verbose strings... yes
checking whether to enable SSPI support (Windows native builds only)... no
checking whether to enable basic authentication method... yes
checking whether to enable bearer authentication method... yes
checking whether to enable digest authentication method... yes
checking whether to enable kerberos authentication method... yes
checking whether to enable negotiate authentication method... yes
checking whether to enable aws sig methods... yes
checking whether to support NTLM... yes
checking whether to enable TLS-SRP authentication... yes
checking whether to enable Unix domain sockets... auto
checking for struct sockaddr_un.sun_path... yes
checking whether to support cookies... yes
checking whether to support socketpair... yes
checking whether to support HTTP authentication... yes
checking whether to support DoH... yes
checking whether to support the MIME API... yes
checking whether to support binding connections locally... yes
checking whether to support the form API... yes
checking whether to support date parsing... yes
checking whether to support netrc parsing... yes
checking whether to support progress-meter... yes
checking whether to support the SHA-512/256 hash algorithm... yes
checking whether to support DNS shuffling... yes
checking whether to support curl_easy_option*... yes
checking whether to support alt-svc... yes
checking whether to support headers-api... yes
configure: disables HSTS due to lack of SSL
checking whether to support WebSockets... yes
checking whether hiding of library internal symbols will actually happen... yes
checking if this build supports HTTPS-proxy... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating docs/Makefile
config.status: creating docs/examples/Makefile
config.status: creating docs/libcurl/Makefile
config.status: creating docs/libcurl/opts/Makefile
config.status: creating docs/cmdline-opts/Makefile
config.status: creating include/Makefile
config.status: creating include/curl/Makefile
config.status: creating src/Makefile
config.status: creating lib/Makefile
config.status: creating scripts/Makefile
config.status: creating lib/libcurl.vers
config.status: creating tests/Makefile
config.status: creating tests/config
config.status: creating tests/configurehelp.pm
config.status: creating tests/certs/Makefile
config.status: creating tests/certs/scripts/Makefile
config.status: creating tests/data/Makefile
config.status: creating tests/server/Makefile
config.status: creating tests/libtest/Makefile
config.status: creating tests/unit/Makefile
config.status: creating tests/http/config.ini
config.status: creating tests/http/Makefile
config.status: creating tests/http/clients/Makefile
config.status: creating packages/Makefile
config.status: creating packages/vms/Makefile
config.status: creating curl-config
config.status: creating libcurl.pc
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:
Host setup: x86_64-pc-linux-gnu
Install prefix: /usr/local
Compiler: ccache gcc
CFLAGS: -Werror-implicit-function-declaration -O2 -Wno-system-headers
CFLAGS extras:
CPPFLAGS: -D_GNU_SOURCE
LDFLAGS:
curl-config:
LIBS: -lpsl -lz
curl version: 8.12.0-DEV
SSL: no (--with-{openssl,gnutls,mbedtls,wolfssl,schannel,secure-transport,amissl,bearssl,rustls} )
SSH: no (--with-{libssh,libssh2})
zlib: enabled
brotli: no (--with-brotli)
zstd: no (--with-zstd)
GSS-API: no (--with-gssapi)
GSASL: no (libgsasl not found)
TLS-SRP: no (--enable-tls-srp)
resolver: POSIX threaded
IPv6: enabled
Unix sockets: enabled
IDN: no (--with-{libidn2,winidn})
Build docs: no
Build libcurl: Shared=no, Static=yes
Built-in manual: no (--enable-manual)
--libcurl option: enabled (--disable-libcurl-option)
Verbose errors: enabled (--disable-verbose)
Code coverage: disabled
SSPI: no (--enable-sspi)
ca cert bundle: no
ca cert path:
ca cert embed: no
ca fallback:
LDAP: no (--enable-ldap / --with-ldap-lib / --with-lber-lib)
LDAPS: no (--enable-ldaps)
IPFS/IPNS: enabled
RTSP: enabled
RTMP: no (--with-librtmp)
PSL: enabled
Alt-svc: enabled (--disable-alt-svc)
Headers API: enabled (--disable-headers-api)
HSTS: no (--enable-hsts)
HTTP1: enabled (internal)
HTTP2: no (--with-nghttp2)
HTTP3: no (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic, --with-msh3)
ECH: no (--enable-ech)
SSLS-EXPORT: no (--enable-ssls-export)
Protocols: dict file ftp gopher http imap ipfs ipns mqtt pop3 rtsp smtp telnet tftp ws
Features: alt-svc AsynchDNS IPv6 Largefile libz PSL threadsafe UnixSockets
configure: WARNING: Cannot find libraries for LDAP support: LDAP disabled
configure: WARNING: libgsasl was not found
configure: WARNING: Cannot find libidn2
$ make -j3
Making all in lib
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
make all-am
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
CC libcurl_la-altsvc.lo
CC libcurl_la-amigaos.lo
CC libcurl_la-asyn-ares.lo
CC libcurl_la-asyn-thread.lo
CC libcurl_la-base64.lo
CC libcurl_la-bufq.lo
CC libcurl_la-bufref.lo
CC libcurl_la-cf-h1-proxy.lo
CC libcurl_la-cf-h2-proxy.lo
CC libcurl_la-cf-haproxy.lo
CC libcurl_la-cf-https-connect.lo
CC libcurl_la-cf-socket.lo
CC libcurl_la-cfilters.lo
CC libcurl_la-conncache.lo
CC libcurl_la-connect.lo
CC libcurl_la-content_encoding.lo
CC libcurl_la-cookie.lo
CC libcurl_la-curl_addrinfo.lo
CC libcurl_la-curl_endian.lo
CC libcurl_la-curl_des.lo
CC libcurl_la-curl_fnmatch.lo
CC libcurl_la-curl_get_line.lo
CC libcurl_la-curl_gethostname.lo
CC libcurl_la-curl_gssapi.lo
CC libcurl_la-curl_memrchr.lo
CC libcurl_la-curl_multibyte.lo
CC libcurl_la-curl_ntlm_core.lo
CC libcurl_la-curl_range.lo
CC libcurl_la-curl_rtmp.lo
CC libcurl_la-curl_sasl.lo
CC libcurl_la-curl_sha512_256.lo
CC libcurl_la-curl_sspi.lo
CC libcurl_la-curl_threads.lo
CC libcurl_la-curl_trc.lo
CC libcurl_la-cw-out.lo
CC libcurl_la-dict.lo
CC libcurl_la-dllmain.lo
CC libcurl_la-doh.lo
CC libcurl_la-dynbuf.lo
CC libcurl_la-dynhds.lo
CC libcurl_la-easy.lo
CC libcurl_la-easygetopt.lo
CC libcurl_la-easyoptions.lo
CC libcurl_la-escape.lo
CC libcurl_la-file.lo
CC libcurl_la-fileinfo.lo
CC libcurl_la-fopen.lo
CC libcurl_la-formdata.lo
CC libcurl_la-ftp.lo
CC libcurl_la-ftplistparser.lo
CC libcurl_la-getenv.lo
CC libcurl_la-getinfo.lo
CC libcurl_la-gopher.lo
CC libcurl_la-hash.lo
CC libcurl_la-headers.lo
CC libcurl_la-hmac.lo
CC libcurl_la-hostasyn.lo
CC libcurl_la-hostip.lo
CC libcurl_la-hostip4.lo
CC libcurl_la-hostip6.lo
CC libcurl_la-hostsyn.lo
CC libcurl_la-hsts.lo
CC libcurl_la-http.lo
CC libcurl_la-http1.lo
CC libcurl_la-http2.lo
CC libcurl_la-http_aws_sigv4.lo
CC libcurl_la-http_chunks.lo
CC libcurl_la-http_digest.lo
CC libcurl_la-http_negotiate.lo
CC libcurl_la-http_ntlm.lo
CC libcurl_la-http_proxy.lo
CC libcurl_la-idn.lo
CC libcurl_la-if2ip.lo
CC libcurl_la-imap.lo
CC libcurl_la-inet_ntop.lo
CC libcurl_la-inet_pton.lo
CC libcurl_la-krb5.lo
CC libcurl_la-ldap.lo
CC libcurl_la-llist.lo
CC libcurl_la-macos.lo
CC libcurl_la-md4.lo
CC libcurl_la-md5.lo
CC libcurl_la-memdebug.lo
CC libcurl_la-mime.lo
CC libcurl_la-mprintf.lo
CC libcurl_la-mqtt.lo
CC libcurl_la-multi.lo
CC libcurl_la-netrc.lo
CC libcurl_la-nonblock.lo
CC libcurl_la-noproxy.lo
CC libcurl_la-openldap.lo
CC libcurl_la-parsedate.lo
CC libcurl_la-pingpong.lo
CC libcurl_la-pop3.lo
CC libcurl_la-progress.lo
CC libcurl_la-psl.lo
CC libcurl_la-rand.lo
CC libcurl_la-rename.lo
CC libcurl_la-request.lo
CC libcurl_la-rtsp.lo
CC libcurl_la-select.lo
CC libcurl_la-sendf.lo
CC libcurl_la-setopt.lo
CC libcurl_la-share.lo
CC libcurl_la-sha256.lo
CC libcurl_la-slist.lo
CC libcurl_la-smb.lo
CC libcurl_la-smtp.lo
CC libcurl_la-socketpair.lo
CC libcurl_la-socks.lo
CC libcurl_la-socks_gssapi.lo
CC libcurl_la-socks_sspi.lo
CC libcurl_la-speedcheck.lo
CC libcurl_la-splay.lo
CC libcurl_la-strcase.lo
CC libcurl_la-strdup.lo
CC libcurl_la-strerror.lo
CC libcurl_la-strparse.lo
CC libcurl_la-strtok.lo
CC libcurl_la-strtoofft.lo
CC libcurl_la-system_win32.lo
CC libcurl_la-telnet.lo
CC libcurl_la-tftp.lo
CC libcurl_la-timediff.lo
CC libcurl_la-timeval.lo
CC libcurl_la-transfer.lo
CC libcurl_la-url.lo
CC libcurl_la-urlapi.lo
CC libcurl_la-version.lo
CC libcurl_la-version_win32.lo
CC libcurl_la-warnless.lo
CC libcurl_la-ws.lo
CC vauth/libcurl_la-cleartext.lo
CC vauth/libcurl_la-cram.lo
CC vauth/libcurl_la-digest.lo
CC vauth/libcurl_la-digest_sspi.lo
CC vauth/libcurl_la-gsasl.lo
CC vauth/libcurl_la-krb5_gssapi.lo
CC vauth/libcurl_la-krb5_sspi.lo
CC vauth/libcurl_la-ntlm.lo
CC vauth/libcurl_la-ntlm_sspi.lo
CC vauth/libcurl_la-oauth2.lo
CC vauth/libcurl_la-spnego_gssapi.lo
CC vauth/libcurl_la-spnego_sspi.lo
CC vauth/libcurl_la-vauth.lo
CC vtls/libcurl_la-bearssl.lo
CC vtls/libcurl_la-cipher_suite.lo
CC vtls/libcurl_la-gtls.lo
CC vtls/libcurl_la-hostcheck.lo
CC vtls/libcurl_la-keylog.lo
CC vtls/libcurl_la-mbedtls.lo
CC vtls/libcurl_la-mbedtls_threadlock.lo
CC vtls/libcurl_la-openssl.lo
CC vtls/libcurl_la-rustls.lo
CC vtls/libcurl_la-schannel.lo
CC vtls/libcurl_la-schannel_verify.lo
CC vtls/libcurl_la-sectransp.lo
CC vtls/libcurl_la-vtls.lo
CC vtls/libcurl_la-vtls_scache.lo
CC vtls/libcurl_la-vtls_spack.lo
CC vtls/libcurl_la-wolfssl.lo
CC vtls/libcurl_la-x509asn1.lo
CC vquic/libcurl_la-curl_msh3.lo
CC vquic/libcurl_la-curl_ngtcp2.lo
CC vquic/libcurl_la-curl_osslq.lo
CC vquic/libcurl_la-curl_quiche.lo
CC vquic/libcurl_la-vquic.lo
CC vquic/libcurl_la-vquic-tls.lo
CC vssh/libcurl_la-libssh.lo
CC vssh/libcurl_la-libssh2.lo
CC vssh/libcurl_la-curl_path.lo
CC vssh/libcurl_la-wolfssh.lo
CCLD libcurl.la
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
Making all in docs
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
Making all in .
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
make[2]: Nothing to be done for 'all-am'.
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
Making all in cmdline-opts
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
Making all in libcurl
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs/libcurl'
Making all in opts
make[3]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs/libcurl/opts'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs/libcurl/opts'
make[3]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs/libcurl'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs/libcurl'
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs/libcurl'
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
Making all in src
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/src'
CC slist_wc.o
CC terminal.o
CC tool_bname.o
CC tool_cb_dbg.o
CC tool_cb_hdr.o
CC tool_cb_prg.o
CC tool_cb_rea.o
CC tool_cb_see.o
CC tool_cb_soc.o
CC tool_cb_wrt.o
CC tool_cfgable.o
CC tool_dirhie.o
CC tool_doswin.o
CC tool_easysrc.o
CC tool_filetime.o
CC tool_findfile.o
CC tool_formparse.o
CC tool_getparam.o
CC tool_getpass.o
CC tool_help.o
CC tool_helpers.o
echo '#include "tool_hugehelp.h"' >> tool_hugehelp.c
CC tool_ipfs.o
CC tool_libinfo.o
CC tool_listhelp.o
CC tool_main.o
CC tool_msgs.o
CC tool_operate.o
CC tool_operhlp.o
CC tool_paramhlp.o
CC tool_parsecfg.o
CC tool_progress.o
CC tool_setopt.o
CC tool_sleep.o
CC tool_ssls.o
CC tool_stderr.o
CC tool_strdup.o
CC tool_urlglob.o
CC tool_util.o
CC tool_vms.o
CC tool_writeout.o
CC tool_writeout_json.o
CC tool_xattr.o
CC var.o
echo 'extern const void *curl_ca_embed; const void *curl_ca_embed;' > tool_ca_embed.c
CC tool_hugehelp.o
CC tool_ca_embed.o
CC ../lib/base64.o
CC ../lib/curl_multibyte.o
CC ../lib/curl_get_line.o
CC ../lib/dynbuf.o
CC ../lib/nonblock.o
CC ../lib/strtoofft.o
CC ../lib/timediff.o
CC ../lib/version_win32.o
CC ../lib/warnless.o
CCLD curl
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/src'
Making all in scripts
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/scripts'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/scripts'
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0'
| @@ -283,8 +283,10 @@ static void usage(const char *msg) | |
| fprintf(stderr, | |
| " -A number abort transfer after `number` response bytes\n" | |
| " -F number fail writing response after `number` response bytes\n" | |
| + | " -M number max concurrent connections to a host\n" |
| " -P number pause transfer after `number` response bytes\n" | |
| " -r <host>:<port>:<addr> resolve information\n" | |
| + | " -T number max concurrent connections total\n" |
| " -V http_version (http/1.1, h2, h3) http version to use\n" | |
| ); | |
| } | |
| @@ -88,7 +88,7 @@ class TestBasic: | |
| # simple download, check connect/handshake timings | |
| @pytest.mark.skipif(condition=not Env.have_ssl_curl(), reason="curl without SSL") | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_01_06_timings(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_01_06_timings(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| curl = CurlClient(env=env) | |
| @@ -103,7 +103,7 @@ class TestBasic: | |
| # simple https: HEAD | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| @pytest.mark.skipif(condition=not Env.have_ssl_curl(), reason="curl without SSL") | |
| - | def test_01_07_head(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_01_07_head(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| curl = CurlClient(env=env) | |
| @@ -59,7 +59,7 @@ class TestDownload: | |
| # download 1 file | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_02_01_download_1(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_02_01_download_1(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| curl = CurlClient(env=env) | |
| @@ -69,7 +69,7 @@ class TestDownload: | |
| # download 2 files | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_02_02_download_2(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_02_02_download_2(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| curl = CurlClient(env=env) | |
| @@ -79,8 +79,7 @@ class TestDownload: | |
| # download 100 files sequentially | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_02_03_download_sequential(self, env: Env, |
| - | httpd, nghttpx, repeat, proto): |
| + | def test_02_03_download_sequential(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 10 | |
| @@ -91,8 +90,7 @@ class TestDownload: | |
| # download 100 files parallel | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_02_04_download_parallel(self, env: Env, |
| - | httpd, nghttpx, repeat, proto): |
| + | def test_02_04_download_parallel(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 10 | |
| @@ -112,8 +110,7 @@ class TestDownload: | |
| # download 500 files sequential | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_02_05_download_many_sequential(self, env: Env, |
| - | httpd, nghttpx, repeat, proto): |
| + | def test_02_05_download_many_sequential(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -132,8 +129,7 @@ class TestDownload: | |
| # download 500 files parallel | |
| @pytest.mark.parametrize("proto", ['h2', 'h3']) | |
| - | def test_02_06_download_many_parallel(self, env: Env, |
| - | httpd, nghttpx, repeat, proto): |
| + | def test_02_06_download_many_parallel(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 200 | |
| @@ -147,8 +143,7 @@ class TestDownload: | |
| # download files parallel, check connection reuse/multiplex | |
| @pytest.mark.parametrize("proto", ['h2', 'h3']) | |
| - | def test_02_07_download_reuse(self, env: Env, |
| - | httpd, nghttpx, repeat, proto): |
| + | def test_02_07_download_reuse(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 200 | |
| @@ -166,8 +161,7 @@ class TestDownload: | |
| # download files parallel with http/1.1, check connection not reused | |
| @pytest.mark.parametrize("proto", ['http/1.1']) | |
| - | def test_02_07b_download_reuse(self, env: Env, |
| - | httpd, nghttpx, repeat, proto): |
| + | def test_02_07b_download_reuse(self, env: Env, httpd, nghttpx, proto): |
| count = 6 | |
| curl = CurlClient(env=env) | |
| urln = f'https://{env.authority_for(env.domain1, proto)}/data.json?[0-{count-1}]' | |
| @@ -180,8 +174,7 @@ class TestDownload: | |
| assert r.total_connects == count, "http/1.1 should use this many connections" | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_02_08_1MB_serial(self, env: Env, |
| - | httpd, nghttpx, repeat, proto): |
| + | def test_02_08_1MB_serial(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 5 | |
| @@ -191,8 +184,7 @@ class TestDownload: | |
| r.check_response(count=count, http_status=200) | |
| @pytest.mark.parametrize("proto", ['h2', 'h3']) | |
| - | def test_02_09_1MB_parallel(self, env: Env, |
| - | httpd, nghttpx, repeat, proto): |
| + | def test_02_09_1MB_parallel(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 5 | |
| @@ -206,8 +198,7 @@ class TestDownload: | |
| @pytest.mark.skipif(condition=Env().slow_network, reason="not suitable for slow network tests") | |
| @pytest.mark.skipif(condition=Env().ci_run, reason="not suitable for CI runs") | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_02_10_10MB_serial(self, env: Env, |
| - | httpd, nghttpx, repeat, proto): |
| + | def test_02_10_10MB_serial(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 3 | |
| @@ -219,8 +210,7 @@ class TestDownload: | |
| @pytest.mark.skipif(condition=Env().slow_network, reason="not suitable for slow network tests") | |
| @pytest.mark.skipif(condition=Env().ci_run, reason="not suitable for CI runs") | |
| @pytest.mark.parametrize("proto", ['h2', 'h3']) | |
| - | def test_02_11_10MB_parallel(self, env: Env, |
| - | httpd, nghttpx, repeat, proto): |
| + | def test_02_11_10MB_parallel(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -234,8 +224,7 @@ class TestDownload: | |
| r.check_response(count=count, http_status=200) | |
| @pytest.mark.parametrize("proto", ['h2', 'h3']) | |
| - | def test_02_12_head_serial_https(self, env: Env, |
| - | httpd, nghttpx, repeat, proto): |
| + | def test_02_12_head_serial_https(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 5 | |
| @@ -247,8 +236,7 @@ class TestDownload: | |
| r.check_response(count=count, http_status=200) | |
| @pytest.mark.parametrize("proto", ['h2']) | |
| - | def test_02_13_head_serial_h2c(self, env: Env, |
| - | httpd, nghttpx, repeat, proto): |
| + | def test_02_13_head_serial_h2c(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 5 | |
| @@ -260,7 +248,7 @@ class TestDownload: | |
| r.check_response(count=count, http_status=200) | |
| @pytest.mark.parametrize("proto", ['h2', 'h3']) | |
| - | def test_02_14_not_found(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_02_14_not_found(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -276,7 +264,7 @@ class TestDownload: | |
| remote_ip='127.0.0.1') | |
| @pytest.mark.parametrize("proto", ['h2', 'h3']) | |
| - | def test_02_15_fail_not_found(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_02_15_fail_not_found(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -292,7 +280,7 @@ class TestDownload: | |
| remote_ip='127.0.0.1') | |
| @pytest.mark.skipif(condition=Env().slow_network, reason="not suitable for slow network tests") | |
| - | def test_02_20_h2_small_frames(self, env: Env, httpd, repeat): |
| + | def test_02_20_h2_small_frames(self, env: Env, httpd): |
| # Test case to reproduce content corruption as observed in | |
| # https://github.com/curl/curl/issues/10525 | |
| # To reliably reproduce, we need an Apache httpd that supports | |
| @@ -327,7 +315,7 @@ class TestDownload: | |
| # download via lib client, 1 at a time, pause/resume at different offsets | |
| @pytest.mark.parametrize("pause_offset", [0, 10*1024, 100*1023, 640000]) | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_02_21_lib_serial(self, env: Env, httpd, nghttpx, proto, pause_offset, repeat): |
| + | def test_02_21_lib_serial(self, env: Env, httpd, nghttpx, proto, pause_offset): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 2 | |
| @@ -346,7 +334,7 @@ class TestDownload: | |
| # download via lib client, several at a time, pause/resume | |
| @pytest.mark.parametrize("pause_offset", [100*1023]) | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_02_22_lib_parallel_resume(self, env: Env, httpd, nghttpx, proto, pause_offset, repeat): |
| + | def test_02_22_lib_parallel_resume(self, env: Env, httpd, nghttpx, proto, pause_offset): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 2 | |
| @@ -366,7 +354,7 @@ class TestDownload: | |
| # download, several at a time, pause and abort paused | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_02_23a_lib_abort_paused(self, env: Env, httpd, nghttpx, proto, repeat): |
| + | def test_02_23a_lib_abort_paused(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_ossl_quic(): | |
| @@ -395,7 +383,7 @@ class TestDownload: | |
| # download, several at a time, abort after n bytes | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_02_23b_lib_abort_offset(self, env: Env, httpd, nghttpx, proto, repeat): |
| + | def test_02_23b_lib_abort_offset(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_ossl_quic(): | |
| @@ -424,7 +412,7 @@ class TestDownload: | |
| # download, several at a time, abort after n bytes | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_02_23c_lib_fail_offset(self, env: Env, httpd, nghttpx, proto, repeat): |
| + | def test_02_23c_lib_fail_offset(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_ossl_quic(): | |
| @@ -453,7 +441,7 @@ class TestDownload: | |
| # speed limited download | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_02_24_speed_limit(self, env: Env, httpd, nghttpx, proto, repeat): |
| + | def test_02_24_speed_limit(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 1 | |
| @@ -471,7 +459,7 @@ class TestDownload: | |
| # make extreme parallel h2 upgrades, check invalid conn reuse | |
| # before protocol switch has happened | |
| - | def test_02_25_h2_upgrade_x(self, env: Env, httpd, repeat): |
| + | def test_02_25_h2_upgrade_x(self, env: Env, httpd): |
| url = f'http://localhost:{env.http_port}/data-100k' | |
| client = LocalClient(name='h2-upgrade-extreme', env=env, timeout=15) | |
| if not client.exists(): | |
| @@ -482,7 +470,7 @@ class TestDownload: | |
| # Special client that tests TLS session reuse in parallel transfers | |
| # TODO: just uses a single connection for h2/h3. Not sure how to prevent that | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_02_26_session_shared_reuse(self, env: Env, proto, httpd, nghttpx, repeat): |
| + | def test_02_26_session_shared_reuse(self, env: Env, proto, httpd, nghttpx): |
| url = f'https://{env.authority_for(env.domain1, proto)}/data-100k' | |
| client = LocalClient(name='tls-session-reuse', env=env) | |
| if not client.exists(): | |
| @@ -492,7 +480,7 @@ class TestDownload: | |
| # test on paused transfers, based on issue #11982 | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_02_27a_paused_no_cl(self, env: Env, httpd, nghttpx, proto, repeat): |
| + | def test_02_27a_paused_no_cl(self, env: Env, httpd, nghttpx, proto): |
| url = f'https://{env.authority_for(env.domain1, proto)}' \ | |
| '/curltest/tweak/?&chunks=6&chunk_size=8000' | |
| client = LocalClient(env=env, name='h2-pausing') | |
| @@ -501,7 +489,7 @@ class TestDownload: | |
| # test on paused transfers, based on issue #11982 | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_02_27b_paused_no_cl(self, env: Env, httpd, nghttpx, proto, repeat): |
| + | def test_02_27b_paused_no_cl(self, env: Env, httpd, nghttpx, proto): |
| url = f'https://{env.authority_for(env.domain1, proto)}' \ | |
| '/curltest/tweak/?error=502' | |
| client = LocalClient(env=env, name='h2-pausing') | |
| @@ -510,7 +498,7 @@ class TestDownload: | |
| # test on paused transfers, based on issue #11982 | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_02_27c_paused_no_cl(self, env: Env, httpd, nghttpx, proto, repeat): |
| + | def test_02_27c_paused_no_cl(self, env: Env, httpd, nghttpx, proto): |
| url = f'https://{env.authority_for(env.domain1, proto)}' \ | |
| '/curltest/tweak/?status=200&chunks=1&chunk_size=100' | |
| client = LocalClient(env=env, name='h2-pausing') | |
| @@ -518,7 +506,7 @@ class TestDownload: | |
| r.check_exit_code(0) | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_02_28_get_compressed(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_02_28_get_compressed(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 1 | |
| @@ -546,7 +534,7 @@ class TestDownload: | |
| # download via lib client, 1 at a time, pause/resume at different offsets | |
| @pytest.mark.parametrize("pause_offset", [0, 10*1024, 100*1023, 640000]) | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_02_29_h2_lib_serial(self, env: Env, httpd, nghttpx, proto, pause_offset, repeat): |
| + | def test_02_29_h2_lib_serial(self, env: Env, httpd, nghttpx, proto, pause_offset): |
| count = 2 | |
| docname = 'data-10m' | |
| url = f'https://localhost:{env.https_port}/{docname}' | |
| @@ -46,7 +46,7 @@ class TestGoAway: | |
| httpd.reload() | |
| # download files sequentially with delay, reload server for GOAWAY | |
| - | def test_03_01_h2_goaway(self, env: Env, httpd, nghttpx, repeat): |
| + | def test_03_01_h2_goaway(self, env: Env, httpd, nghttpx): |
| proto = 'h2' | |
| count = 3 | |
| self.r = None | |
| @@ -78,7 +78,7 @@ class TestGoAway: | |
| # download files sequentially with delay, reload server for GOAWAY | |
| @pytest.mark.skipif(condition=not Env.have_h3(), reason="h3 not supported") | |
| - | def test_03_02_h3_goaway(self, env: Env, httpd, nghttpx, repeat): |
| + | def test_03_02_h3_goaway(self, env: Env, httpd, nghttpx): |
| proto = 'h3' | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| pytest.skip("msh3 stalls here") | |
| @@ -112,7 +112,7 @@ class TestGoAway: | |
| log.debug(f'request {idx} connected') | |
| # download files sequentially with delay, reload server for GOAWAY | |
| - | def test_03_03_h1_goaway(self, env: Env, httpd, nghttpx, repeat): |
| + | def test_03_03_h1_goaway(self, env: Env, httpd, nghttpx): |
| proto = 'http/1.1' | |
| count = 3 | |
| self.r = None | |
| @@ -47,8 +47,7 @@ class TestStuttered: | |
| # download 1 file, check that delayed response works in general | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_04_01_download_1(self, env: Env, httpd, nghttpx, repeat, |
| - | proto): |
| + | def test_04_01_download_1(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 1 | |
| @@ -63,8 +62,7 @@ class TestStuttered: | |
| # prepend 100 file requests to warm up connection processing limits | |
| # (Apache2 increases # of parallel processed requests after successes) | |
| @pytest.mark.parametrize("proto", ['h2', 'h3']) | |
| - | def test_04_02_100_100_10(self, env: Env, |
| - | httpd, nghttpx, repeat, proto): |
| + | def test_04_02_100_100_10(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 50 | |
| @@ -86,7 +84,7 @@ class TestStuttered: | |
| # prepend 100 file requests to warm up connection processing limits | |
| # (Apache2 increases # of parallel processed requests after successes) | |
| @pytest.mark.parametrize("proto", ['h2', 'h3']) | |
| - | def test_04_03_1000_10_1(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_04_03_1000_10_1(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 50 | |
| @@ -108,7 +106,7 @@ class TestStuttered: | |
| # prepend 100 file requests to warm up connection processing limits | |
| # (Apache2 increases # of parallel processed requests after successes) | |
| @pytest.mark.parametrize("proto", ['h2', 'h3']) | |
| - | def test_04_04_1000_10_1(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_04_04_1000_10_1(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 50 | |
| @@ -46,8 +46,7 @@ class TestErrors: | |
| # download 1 file, check that we get CURLE_PARTIAL_FILE | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_05_01_partial_1(self, env: Env, httpd, nghttpx, repeat, |
| - | proto): |
| + | def test_05_01_partial_1(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -69,8 +68,7 @@ class TestErrors: | |
| # download files, check that we get CURLE_PARTIAL_FILE for all | |
| @pytest.mark.parametrize("proto", ['h2', 'h3']) | |
| - | def test_05_02_partial_20(self, env: Env, httpd, nghttpx, repeat, |
| - | proto): |
| + | def test_05_02_partial_20(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -92,7 +90,7 @@ class TestErrors: | |
| assert len(invalid_stats) == 0, f'failed: {invalid_stats}' | |
| # access a resource that, on h2, RST the stream with HTTP_1_1_REQUIRED | |
| - | def test_05_03_required(self, env: Env, httpd, nghttpx, repeat): |
| + | def test_05_03_required(self, env: Env, httpd, nghttpx): |
| curl = CurlClient(env=env) | |
| proto = 'http/1.1' | |
| urln = f'https://{env.authority_for(env.domain1, proto)}/curltest/1_1' | |
| @@ -117,7 +115,7 @@ class TestErrors: | |
| # - h2 to work since it will signal the end of the response before | |
| # and not see the "unclean" close either | |
| @pytest.mark.parametrize("proto", ['http/1.0', 'http/1.1', 'h2']) | |
| - | def test_05_04_unclean_tls_shutdown(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_05_04_unclean_tls_shutdown(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 10 if proto == 'h2' else 1 | |
| @@ -44,7 +44,7 @@ class TestEyeballs: | |
| # download using only HTTP/3 on working server | |
| @pytest.mark.skipif(condition=not Env.have_h3(), reason="missing HTTP/3 support") | |
| - | def test_06_01_h3_only(self, env: Env, httpd, nghttpx, repeat): |
| + | def test_06_01_h3_only(self, env: Env, httpd, nghttpx): |
| curl = CurlClient(env=env) | |
| urln = f'https://{env.authority_for(env.domain1, "h3")}/data.json' | |
| r = curl.http_download(urls=[urln], extra_args=['--http3-only']) | |
| @@ -53,7 +53,7 @@ class TestEyeballs: | |
| # download using only HTTP/3 on missing server | |
| @pytest.mark.skipif(condition=not Env.have_h3(), reason="missing HTTP/3 support") | |
| - | def test_06_02_h3_only(self, env: Env, httpd, nghttpx, repeat): |
| + | def test_06_02_h3_only(self, env: Env, httpd, nghttpx): |
| nghttpx.stop_if_running() | |
| curl = CurlClient(env=env) | |
| urln = f'https://{env.authority_for(env.domain1, "h3")}/data.json' | |
| @@ -62,7 +62,7 @@ class TestEyeballs: | |
| # download using HTTP/3 on missing server with fallback on h2 | |
| @pytest.mark.skipif(condition=not Env.have_h3(), reason="missing HTTP/3 support") | |
| - | def test_06_03_h3_fallback_h2(self, env: Env, httpd, nghttpx, repeat): |
| + | def test_06_03_h3_fallback_h2(self, env: Env, httpd, nghttpx): |
| nghttpx.stop_if_running() | |
| curl = CurlClient(env=env) | |
| urln = f'https://{env.authority_for(env.domain1, "h3")}/data.json' | |
| @@ -72,7 +72,7 @@ class TestEyeballs: | |
| # download using HTTP/3 on missing server with fallback on http/1.1 | |
| @pytest.mark.skipif(condition=not Env.have_h3(), reason="missing HTTP/3 support") | |
| - | def test_06_04_h3_fallback_h1(self, env: Env, httpd, nghttpx, repeat): |
| + | def test_06_04_h3_fallback_h1(self, env: Env, httpd, nghttpx): |
| nghttpx.stop_if_running() | |
| curl = CurlClient(env=env) | |
| urln = f'https://{env.authority_for(env.domain2, "h3")}/data.json' | |
| @@ -81,7 +81,7 @@ class TestEyeballs: | |
| assert r.stats[0]['http_version'] == '1.1' | |
| # make a successful https: transfer and observer the timer stats | |
| - | def test_06_10_stats_success(self, env: Env, httpd, nghttpx, repeat): |
| + | def test_06_10_stats_success(self, env: Env, httpd, nghttpx): |
| curl = CurlClient(env=env) | |
| urln = f'https://{env.authority_for(env.domain1, "h2")}/data.json' | |
| r = curl.http_download(urls=[urln]) | |
| @@ -90,7 +90,7 @@ class TestEyeballs: | |
| assert r.stats[0]['time_appconnect'] > 0.0 | |
| # make https: to a hostname that tcp connects, but will not verify | |
| - | def test_06_11_stats_fail_verify(self, env: Env, httpd, nghttpx, repeat): |
| + | def test_06_11_stats_fail_verify(self, env: Env, httpd, nghttpx): |
| curl = CurlClient(env=env) | |
| urln = f'https://not-valid.com:{env.https_port}/data.json' | |
| r = curl.http_download(urls=[urln], extra_args=[ | |
| @@ -101,7 +101,7 @@ class TestEyeballs: | |
| assert r.stats[0]['time_appconnect'] == 0 # but not SSL verified | |
| # make https: to an invalid address | |
| - | def test_06_12_stats_fail_tcp(self, env: Env, httpd, nghttpx, repeat): |
| + | def test_06_12_stats_fail_tcp(self, env: Env, httpd, nghttpx): |
| curl = CurlClient(env=env) | |
| urln = 'https://not-valid.com:1/data.json' | |
| r = curl.http_download(urls=[urln], extra_args=[ | |
| @@ -55,7 +55,7 @@ class TestUpload: | |
| # upload small data, check that this is what was echoed | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_07_01_upload_1_small(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_07_01_upload_1_small(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -70,7 +70,7 @@ class TestUpload: | |
| # upload large data, check that this is what was echoed | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_07_02_upload_1_large(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_07_02_upload_1_large(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -86,7 +86,7 @@ class TestUpload: | |
| # upload data sequentially, check that they were echoed | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_07_10_upload_sequential(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_07_10_upload_sequential(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -103,7 +103,7 @@ class TestUpload: | |
| # upload data parallel, check that they were echoed | |
| @pytest.mark.parametrize("proto", ['h2', 'h3']) | |
| - | def test_07_11_upload_parallel(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_07_11_upload_parallel(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -122,7 +122,7 @@ class TestUpload: | |
| # upload large data sequentially, check that this is what was echoed | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_07_12_upload_seq_large(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_07_12_upload_seq_large(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -141,7 +141,7 @@ class TestUpload: | |
| # upload very large data sequentially, check that this is what was echoed | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_07_13_upload_seq_large(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_07_13_upload_seq_large(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -226,7 +226,7 @@ class TestUpload: | |
| # upload data parallel, check that they were echoed | |
| @pytest.mark.parametrize("proto", ['h2', 'h3']) | |
| - | def test_07_20_upload_parallel(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_07_20_upload_parallel(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -245,7 +245,7 @@ class TestUpload: | |
| # upload large data parallel, check that this is what was echoed | |
| @pytest.mark.parametrize("proto", ['h2', 'h3']) | |
| - | def test_07_21_upload_parallel_large(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_07_21_upload_parallel_large(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -262,7 +262,7 @@ class TestUpload: | |
| # upload large data parallel to a URL that denies uploads | |
| @pytest.mark.parametrize("proto", ['h2', 'h3']) | |
| - | def test_07_22_upload_parallel_fail(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_07_22_upload_parallel_fail(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -279,7 +279,7 @@ class TestUpload: | |
| # PUT 100k | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_07_30_put_100k(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_07_30_put_100k(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -299,7 +299,7 @@ class TestUpload: | |
| # PUT 10m | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_07_31_put_10m(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_07_31_put_10m(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -319,7 +319,7 @@ class TestUpload: | |
| # issue #10591 | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_07_32_issue_10591(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_07_32_issue_10591(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -333,7 +333,7 @@ class TestUpload: | |
| # issue #11157, upload that is 404'ed by server, needs to terminate | |
| # correctly and not time out on sending | |
| - | def test_07_33_issue_11157a(self, env: Env, httpd, nghttpx, repeat): |
| + | def test_07_33_issue_11157a(self, env: Env, httpd, nghttpx): |
| proto = 'h2' | |
| fdata = os.path.join(env.gen_dir, 'data-10m') | |
| # send a POST to our PUT handler which will send immediately a 404 back | |
| @@ -354,7 +354,7 @@ class TestUpload: | |
| r.check_stats(1, 404) | |
| # issue #11157, send upload that is slowly read in | |
| - | def test_07_33_issue_11157b(self, env: Env, httpd, nghttpx, repeat): |
| + | def test_07_33_issue_11157b(self, env: Env, httpd, nghttpx): |
| proto = 'h2' | |
| fdata = os.path.join(env.gen_dir, 'data-10m') | |
| # tell our test PUT handler to read the upload more slowly, so | |
| @@ -376,7 +376,7 @@ class TestUpload: | |
| assert r.exit_code == 0, r.dump_logs() | |
| r.check_stats(1, 200) | |
| - | def test_07_34_issue_11194(self, env: Env, httpd, nghttpx, repeat): |
| + | def test_07_34_issue_11194(self, env: Env, httpd, nghttpx): |
| proto = 'h2' | |
| # tell our test PUT handler to read the upload more slowly, so | |
| # that the send buffering and transfer loop needs to wait | |
| @@ -396,7 +396,7 @@ class TestUpload: | |
| r.check_stats(1, 200) | |
| # upload large data on a h1 to h2 upgrade | |
| - | def test_07_35_h1_h2_upgrade_upload(self, env: Env, httpd, nghttpx, repeat): |
| + | def test_07_35_h1_h2_upgrade_upload(self, env: Env, httpd, nghttpx): |
| fdata = os.path.join(env.gen_dir, 'data-100k') | |
| curl = CurlClient(env=env) | |
| url = f'http://{env.domain1}:{env.http_port}/curltest/echo?id=[0-0]' | |
| @@ -413,7 +413,7 @@ class TestUpload: | |
| # upload to a 301,302,303 response | |
| @pytest.mark.parametrize("redir", ['301', '302', '303']) | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_07_36_upload_30x(self, env: Env, httpd, nghttpx, repeat, redir, proto): |
| + | def test_07_36_upload_30x(self, env: Env, httpd, nghttpx, redir, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -430,7 +430,7 @@ class TestUpload: | |
| # upload to a 307 response | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_07_37_upload_307(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_07_37_upload_307(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -447,7 +447,7 @@ class TestUpload: | |
| # POST form data, yet another code path in transfer | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_07_38_form_small(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_07_38_form_small(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -461,7 +461,7 @@ class TestUpload: | |
| # POST data urlencoded, small enough to be sent with request headers | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_07_39_post_urlenc_small(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_07_39_post_urlenc_small(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -479,7 +479,7 @@ class TestUpload: | |
| # POST data urlencoded, large enough to be sent separate from request headers | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_07_40_post_urlenc_large(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_07_40_post_urlenc_large(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -501,7 +501,7 @@ class TestUpload: | |
| # Unfixed, this will fail when run with CURL_DBG_SOCK_WBLOCK=80 most | |
| # of the time | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_07_41_post_urlenc_small(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_07_41_post_urlenc_small(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -536,7 +536,7 @@ class TestUpload: | |
| # upload data, pause, let connection die with an incomplete response | |
| # issues #11769 #13260 | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_07_42a_upload_disconnect(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_07_42a_upload_disconnect(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -557,7 +557,7 @@ class TestUpload: | |
| # upload data, pause, let connection die without any response at all | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_07_42b_upload_disconnect(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_07_42b_upload_disconnect(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -574,7 +574,7 @@ class TestUpload: | |
| # upload data, pause, let connection die after 100 continue | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_07_42c_upload_disconnect(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_07_42c_upload_disconnect(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -590,7 +590,7 @@ class TestUpload: | |
| r.check_exit_code(exp_code) # GOT_NOTHING | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_07_43_upload_denied(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_07_43_upload_denied(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -607,7 +607,7 @@ class TestUpload: | |
| # speed limited on put handler | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_07_50_put_speed_limit(self, env: Env, httpd, nghttpx, proto, repeat): |
| + | def test_07_50_put_speed_limit(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 1 | |
| @@ -627,7 +627,7 @@ class TestUpload: | |
| # speed limited on echo handler | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_07_51_echo_speed_limit(self, env: Env, httpd, nghttpx, proto, repeat): |
| + | def test_07_51_echo_speed_limit(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 1 | |
| @@ -645,7 +645,7 @@ class TestUpload: | |
| # upload larger data, triggering "Expect: 100-continue" code paths | |
| @pytest.mark.parametrize("proto", ['http/1.1']) | |
| - | def test_07_60_upload_exp100(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_07_60_upload_exp100(self, env: Env, httpd, nghttpx, proto): |
| fdata = os.path.join(env.gen_dir, 'data-1m+') | |
| read_delay = 1 | |
| curl = CurlClient(env=env) | |
| @@ -658,7 +658,7 @@ class TestUpload: | |
| # upload larger data, triggering "Expect: 100-continue" code paths | |
| @pytest.mark.parametrize("proto", ['http/1.1']) | |
| - | def test_07_61_upload_exp100_timeout(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_07_61_upload_exp100_timeout(self, env: Env, httpd, nghttpx, proto): |
| fdata = os.path.join(env.gen_dir, 'data-1m+') | |
| read_delay = 2 | |
| curl = CurlClient(env=env) | |
| @@ -69,7 +69,7 @@ class TestCaddy: | |
| # download 1 file | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_08_01_download_1(self, env: Env, caddy: Caddy, repeat, proto): |
| + | def test_08_01_download_1(self, env: Env, caddy: Caddy, proto): |
| if proto == 'h3' and not env.have_h3_curl(): | |
| pytest.skip("h3 not supported in curl") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -81,8 +81,7 @@ class TestCaddy: | |
| # download 1MB files sequentially | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_08_02_download_1mb_sequential(self, env: Env, caddy: Caddy, |
| - | repeat, proto): |
| + | def test_08_02_download_1mb_sequential(self, env: Env, caddy: Caddy, proto): |
| if proto == 'h3' and not env.have_h3_curl(): | |
| pytest.skip("h3 not supported in curl") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -95,8 +94,7 @@ class TestCaddy: | |
| # download 1MB files parallel | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_08_03_download_1mb_parallel(self, env: Env, caddy: Caddy, |
| - | repeat, proto): |
| + | def test_08_03_download_1mb_parallel(self, env: Env, caddy: Caddy, proto): |
| if proto == 'h3' and not env.have_h3_curl(): | |
| pytest.skip("h3 not supported in curl") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -118,8 +116,7 @@ class TestCaddy: | |
| @pytest.mark.skipif(condition=Env().slow_network, reason="not suitable for slow network tests") | |
| @pytest.mark.skipif(condition=Env().ci_run, reason="not suitable for CI runs") | |
| @pytest.mark.parametrize("proto", ['h2', 'h3']) | |
| - | def test_08_04a_download_10mb_sequential(self, env: Env, caddy: Caddy, |
| - | repeat, proto): |
| + | def test_08_04a_download_10mb_sequential(self, env: Env, caddy: Caddy, proto): |
| if proto == 'h3' and not env.have_h3_curl(): | |
| pytest.skip("h3 not supported in curl") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -134,8 +131,7 @@ class TestCaddy: | |
| @pytest.mark.skipif(condition=Env().slow_network, reason="not suitable for slow network tests") | |
| @pytest.mark.skipif(condition=Env().ci_run, reason="not suitable for CI runs") | |
| @pytest.mark.parametrize("proto", ['h2', 'h3']) | |
| - | def test_08_04b_download_10mb_sequential(self, env: Env, caddy: Caddy, |
| - | repeat, proto): |
| + | def test_08_04b_download_10mb_sequential(self, env: Env, caddy: Caddy, proto): |
| if proto == 'h3' and not env.have_h3_curl(): | |
| pytest.skip("h3 not supported in curl") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -150,8 +146,7 @@ class TestCaddy: | |
| @pytest.mark.skipif(condition=Env().slow_network, reason="not suitable for slow network tests") | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| @pytest.mark.skipif(condition=Env().ci_run, reason="not suitable for CI runs") | |
| - | def test_08_05_download_1mb_parallel(self, env: Env, caddy: Caddy, |
| - | repeat, proto): |
| + | def test_08_05_download_1mb_parallel(self, env: Env, caddy: Caddy, proto): |
| if proto == 'h3' and not env.have_h3_curl(): | |
| pytest.skip("h3 not supported in curl") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -174,7 +169,7 @@ class TestCaddy: | |
| # post data parallel, check that they were echoed | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_08_06_post_parallel(self, env: Env, httpd, caddy, repeat, proto): |
| + | def test_08_06_post_parallel(self, env: Env, httpd, caddy, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -193,7 +188,7 @@ class TestCaddy: | |
| # put large file, check that they length were echoed | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_08_07_put_large(self, env: Env, httpd, caddy, repeat, proto): |
| + | def test_08_07_put_large(self, env: Env, httpd, caddy, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('msh3'): | |
| @@ -61,7 +61,7 @@ class TestPush: | |
| httpd.reload() | |
| # download a file that triggers a "103 Early Hints" response | |
| - | def test_09_01_h2_early_hints(self, env: Env, httpd, repeat): |
| + | def test_09_01_h2_early_hints(self, env: Env, httpd): |
| curl = CurlClient(env=env) | |
| url = f'https://{env.domain1}:{env.https_port}/push/data1' | |
| r = curl.http_download(urls=[url], alpn_proto='h2', with_stats=False, | |
| @@ -72,7 +72,7 @@ class TestPush: | |
| assert 'link' in r.responses[0]['header'], f'{r.responses[0]}' | |
| assert r.responses[0]['header']['link'] == '</push/data2>; rel=preload', f'{r.responses[0]}' | |
| - | def test_09_02_h2_push(self, env: Env, httpd, repeat): |
| + | def test_09_02_h2_push(self, env: Env, httpd): |
| # use localhost as we do not have resolve support in local client | |
| url = f'https://localhost:{env.https_port}/push/data1' | |
| client = LocalClient(name='h2-serverpush', env=env) | |
| @@ -59,7 +59,7 @@ class TestProxy: | |
| return None | |
| # download via http: proxy (no tunnel) | |
| - | def test_10_01_proxy_http(self, env: Env, httpd, repeat): |
| + | def test_10_01_proxy_http(self, env: Env, httpd): |
| curl = CurlClient(env=env) | |
| url = f'http://localhost:{env.http_port}/data.json' | |
| r = curl.http_download(urls=[url], alpn_proto='http/1.1', with_stats=True, | |
| @@ -70,7 +70,7 @@ class TestProxy: | |
| @pytest.mark.skipif(condition=not Env.curl_has_feature('HTTPS-proxy'), | |
| reason='curl lacks HTTPS-proxy support') | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2']) | |
| - | def test_10_02_proxys_down(self, env: Env, httpd, proto, repeat): |
| + | def test_10_02_proxys_down(self, env: Env, httpd, proto): |
| if proto == 'h2' and not env.curl_uses_lib('nghttp2'): | |
| pytest.skip('only supported with nghttp2') | |
| curl = CurlClient(env=env) | |
| @@ -92,7 +92,7 @@ class TestProxy: | |
| @pytest.mark.skipif(condition=not Env.have_nghttpx(), | |
| reason="no nghttpx available") | |
| def test_10_02_proxys_up(self, env: Env, httpd, nghttpx, proto, | |
| - | fname, fcount, repeat): |
| + | fname, fcount): |
| if proto == 'h2' and not env.curl_uses_lib('nghttp2'): | |
| pytest.skip('only supported with nghttp2') | |
| count = fcount | |
| @@ -110,7 +110,7 @@ class TestProxy: | |
| assert respdata == indata | |
| # download http: via http: proxytunnel | |
| - | def test_10_03_proxytunnel_http(self, env: Env, httpd, repeat): |
| + | def test_10_03_proxytunnel_http(self, env: Env, httpd): |
| curl = CurlClient(env=env) | |
| url = f'http://localhost:{env.http_port}/data.json' | |
| xargs = curl.get_proxy_args(proxys=False, tunnel=True) | |
| @@ -122,7 +122,7 @@ class TestProxy: | |
| @pytest.mark.skipif(condition=not Env.curl_has_feature('HTTPS-proxy'), | |
| reason='curl lacks HTTPS-proxy support') | |
| @pytest.mark.skipif(condition=not Env.have_nghttpx(), reason="no nghttpx available") | |
| - | def test_10_04_proxy_https(self, env: Env, httpd, nghttpx_fwd, repeat): |
| + | def test_10_04_proxy_https(self, env: Env, httpd, nghttpx_fwd): |
| curl = CurlClient(env=env) | |
| url = f'http://localhost:{env.http_port}/data.json' | |
| xargs = curl.get_proxy_args(tunnel=True) | |
| @@ -133,7 +133,7 @@ class TestProxy: | |
| # download https: with proto via http: proxytunnel | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2']) | |
| @pytest.mark.skipif(condition=not Env.have_ssl_curl(), reason="curl without SSL") | |
| - | def test_10_05_proxytunnel_http(self, env: Env, httpd, proto, repeat): |
| + | def test_10_05_proxytunnel_http(self, env: Env, httpd, proto): |
| curl = CurlClient(env=env) | |
| url = f'https://localhost:{env.https_port}/data.json' | |
| xargs = curl.get_proxy_args(proxys=False, tunnel=True) | |
| @@ -148,7 +148,7 @@ class TestProxy: | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2']) | |
| @pytest.mark.parametrize("tunnel", ['http/1.1', 'h2']) | |
| @pytest.mark.skipif(condition=not Env.have_nghttpx(), reason="no nghttpx available") | |
| - | def test_10_06_proxytunnel_https(self, env: Env, httpd, nghttpx_fwd, proto, tunnel, repeat): |
| + | def test_10_06_proxytunnel_https(self, env: Env, httpd, nghttpx_fwd, proto, tunnel): |
| if tunnel == 'h2' and not env.curl_uses_lib('nghttp2'): | |
| pytest.skip('only supported with nghttp2') | |
| curl = CurlClient(env=env) | |
| @@ -175,7 +175,7 @@ class TestProxy: | |
| ]) | |
| @pytest.mark.skipif(condition=not Env.have_nghttpx(), reason="no nghttpx available") | |
| def test_10_07_pts_down_small(self, env: Env, httpd, nghttpx_fwd, proto, | |
| - | tunnel, fname, fcount, repeat): |
| + | tunnel, fname, fcount): |
| if tunnel == 'h2' and not env.curl_uses_lib('nghttp2'): | |
| pytest.skip('only supported with nghttp2') | |
| count = fcount | |
| @@ -205,7 +205,7 @@ class TestProxy: | |
| ]) | |
| @pytest.mark.skipif(condition=not Env.have_nghttpx(), reason="no nghttpx available") | |
| def test_10_08_upload_seq_large(self, env: Env, httpd, nghttpx, proto, | |
| - | tunnel, fname, fcount, repeat): |
| + | tunnel, fname, fcount): |
| if tunnel == 'h2' and not env.curl_uses_lib('nghttp2'): | |
| pytest.skip('only supported with nghttp2') | |
| count = fcount | |
| @@ -227,7 +227,7 @@ class TestProxy: | |
| @pytest.mark.skipif(condition=not Env.have_ssl_curl(), reason="curl without SSL") | |
| @pytest.mark.parametrize("tunnel", ['http/1.1', 'h2']) | |
| @pytest.mark.skipif(condition=not Env.have_nghttpx(), reason="no nghttpx available") | |
| - | def test_10_09_reuse_ser(self, env: Env, httpd, nghttpx_fwd, tunnel, repeat): |
| + | def test_10_09_reuse_ser(self, env: Env, httpd, nghttpx_fwd, tunnel): |
| if tunnel == 'h2' and not env.curl_uses_lib('nghttp2'): | |
| pytest.skip('only supported with nghttp2') | |
| curl = CurlClient(env=env) | |
| @@ -250,7 +250,7 @@ class TestProxy: | |
| @pytest.mark.skipif(condition=not Env.have_ssl_curl(), reason="curl without SSL") | |
| @pytest.mark.parametrize("tunnel", ['http/1.1', 'h2']) | |
| @pytest.mark.skipif(condition=not Env.have_nghttpx(), reason="no nghttpx available") | |
| - | def test_10_10_reuse_proxy(self, env: Env, httpd, nghttpx_fwd, tunnel, repeat): |
| + | def test_10_10_reuse_proxy(self, env: Env, httpd, nghttpx_fwd, tunnel): |
| # url twice via https: proxy separated with '--next', will reuse | |
| if tunnel == 'h2' and not env.curl_uses_lib('nghttp2'): | |
| pytest.skip('only supported with nghttp2') | |
| @@ -275,7 +275,7 @@ class TestProxy: | |
| @pytest.mark.parametrize("tunnel", ['http/1.1', 'h2']) | |
| @pytest.mark.skipif(condition=not Env.have_nghttpx(), reason="no nghttpx available") | |
| @pytest.mark.skipif(condition=not Env.curl_uses_lib('openssl'), reason="tls13-ciphers not supported") | |
| - | def test_10_11_noreuse_proxy_https(self, env: Env, httpd, nghttpx_fwd, tunnel, repeat): |
| + | def test_10_11_noreuse_proxy_https(self, env: Env, httpd, nghttpx_fwd, tunnel): |
| # different --proxy-tls13-ciphers, no reuse of connection for https: | |
| curl = CurlClient(env=env) | |
| if tunnel == 'h2' and not env.curl_uses_lib('nghttp2'): | |
| @@ -301,7 +301,7 @@ class TestProxy: | |
| @pytest.mark.parametrize("tunnel", ['http/1.1', 'h2']) | |
| @pytest.mark.skipif(condition=not Env.have_nghttpx(), reason="no nghttpx available") | |
| @pytest.mark.skipif(condition=not Env.curl_uses_lib('openssl'), reason="tls13-ciphers not supported") | |
| - | def test_10_12_noreuse_proxy_http(self, env: Env, httpd, nghttpx_fwd, tunnel, repeat): |
| + | def test_10_12_noreuse_proxy_http(self, env: Env, httpd, nghttpx_fwd, tunnel): |
| # different --proxy-tls13-ciphers, no reuse of connection for http: | |
| if tunnel == 'h2' and not env.curl_uses_lib('nghttp2'): | |
| pytest.skip('only supported with nghttp2') | |
| @@ -327,7 +327,7 @@ class TestProxy: | |
| @pytest.mark.parametrize("tunnel", ['http/1.1', 'h2']) | |
| @pytest.mark.skipif(condition=not Env.have_nghttpx(), reason="no nghttpx available") | |
| @pytest.mark.skipif(condition=not Env.curl_uses_lib('openssl'), reason="tls13-ciphers not supported") | |
| - | def test_10_13_noreuse_https(self, env: Env, httpd, nghttpx_fwd, tunnel, repeat): |
| + | def test_10_13_noreuse_https(self, env: Env, httpd, nghttpx_fwd, tunnel): |
| # different --tls13-ciphers on https: same proxy config | |
| if tunnel == 'h2' and not env.curl_uses_lib('nghttp2'): | |
| pytest.skip('only supported with nghttp2') | |
| @@ -354,7 +354,7 @@ class TestProxy: | |
| reason='curl lacks HTTPS-proxy support') | |
| @pytest.mark.skipif(condition=Env.curl_uses_lib('bearssl'), reason="ip address cert verification not supported") | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2']) | |
| - | def test_10_14_proxys_ip_addr(self, env: Env, httpd, proto, repeat): |
| + | def test_10_14_proxys_ip_addr(self, env: Env, httpd, proto): |
| if proto == 'h2' and not env.curl_uses_lib('nghttp2'): | |
| pytest.skip('only supported with nghttp2') | |
| curl = CurlClient(env=env) | |
| @@ -99,7 +99,7 @@ class TestUnix: | |
| faker.stop() | |
| # download http: via Unix socket | |
| - | def test_11_01_unix_connect_http(self, env: Env, httpd, uds_faker, repeat): |
| + | def test_11_01_unix_connect_http(self, env: Env, httpd, uds_faker): |
| curl = CurlClient(env=env) | |
| url = f'http://{env.domain1}:{env.http_port}/data.json' | |
| r = curl.http_download(urls=[url], with_stats=True, | |
| @@ -110,7 +110,7 @@ class TestUnix: | |
| # download https: via Unix socket | |
| @pytest.mark.skipif(condition=not Env.have_ssl_curl(), reason="curl without SSL") | |
| - | def test_11_02_unix_connect_http(self, env: Env, httpd, uds_faker, repeat): |
| + | def test_11_02_unix_connect_http(self, env: Env, httpd, uds_faker): |
| curl = CurlClient(env=env) | |
| url = f'https://{env.domain1}:{env.https_port}/data.json' | |
| r = curl.http_download(urls=[url], with_stats=True, | |
| @@ -121,7 +121,7 @@ class TestUnix: | |
| # download HTTP/3 via Unix socket | |
| @pytest.mark.skipif(condition=not Env.have_h3(), reason='h3 not supported') | |
| - | def test_11_03_unix_connect_quic(self, env: Env, httpd, uds_faker, repeat): |
| + | def test_11_03_unix_connect_quic(self, env: Env, httpd, uds_faker): |
| curl = CurlClient(env=env) | |
| url = f'https://{env.domain1}:{env.https_port}/data.json' | |
| r = curl.http_download(urls=[url], with_stats=True, | |
| @@ -40,8 +40,7 @@ class TestReuse: | |
| # check if HTTP/1.1 handles 'Connection: close' correctly | |
| @pytest.mark.parametrize("proto", ['http/1.1']) | |
| - | def test_12_01_h1_conn_close(self, env: Env, |
| - | httpd, nghttpx, repeat, proto): |
| + | def test_12_01_h1_conn_close(self, env: Env, httpd, nghttpx, proto): |
| httpd.clear_extra_configs() | |
| httpd.set_extra_config('base', [ | |
| 'MaxKeepAliveRequests 1', | |
| @@ -60,8 +59,7 @@ class TestReuse: | |
| @pytest.mark.skipif(condition=Env.httpd_is_at_least('2.5.0'), | |
| reason="httpd 2.5+ handles KeepAlives different") | |
| @pytest.mark.parametrize("proto", ['http/1.1']) | |
| - | def test_12_02_h1_conn_timeout(self, env: Env, |
| - | httpd, nghttpx, repeat, proto): |
| + | def test_12_02_h1_conn_timeout(self, env: Env, httpd, nghttpx, proto): |
| httpd.clear_extra_configs() | |
| httpd.set_extra_config('base', [ | |
| 'KeepAliveTimeout 1', | |
| @@ -58,7 +58,7 @@ class TestProxyAuth: | |
| return None | |
| # download via http: proxy (no tunnel), no auth | |
| - | def test_13_01_proxy_no_auth(self, env: Env, httpd, repeat): |
| + | def test_13_01_proxy_no_auth(self, env: Env, httpd): |
| curl = CurlClient(env=env) | |
| url = f'http://localhost:{env.http_port}/data.json' | |
| r = curl.http_download(urls=[url], alpn_proto='http/1.1', with_stats=True, | |
| @@ -66,7 +66,7 @@ class TestProxyAuth: | |
| r.check_response(count=1, http_status=407) | |
| # download via http: proxy (no tunnel), auth | |
| - | def test_13_02_proxy_auth(self, env: Env, httpd, repeat): |
| + | def test_13_02_proxy_auth(self, env: Env, httpd): |
| curl = CurlClient(env=env) | |
| url = f'http://localhost:{env.http_port}/data.json' | |
| xargs = curl.get_proxy_args(proxys=False) | |
| @@ -78,7 +78,7 @@ class TestProxyAuth: | |
| @pytest.mark.skipif(condition=not Env.curl_has_feature('HTTPS-proxy'), | |
| reason='curl lacks HTTPS-proxy support') | |
| @pytest.mark.skipif(condition=not Env.have_nghttpx(), reason="no nghttpx available") | |
| - | def test_13_03_proxys_no_auth(self, env: Env, httpd, nghttpx_fwd, repeat): |
| + | def test_13_03_proxys_no_auth(self, env: Env, httpd, nghttpx_fwd): |
| curl = CurlClient(env=env) | |
| url = f'http://localhost:{env.http_port}/data.json' | |
| xargs = curl.get_proxy_args(proxys=True) | |
| @@ -89,7 +89,7 @@ class TestProxyAuth: | |
| @pytest.mark.skipif(condition=not Env.curl_has_feature('HTTPS-proxy'), | |
| reason='curl lacks HTTPS-proxy support') | |
| @pytest.mark.skipif(condition=not Env.have_nghttpx(), reason="no nghttpx available") | |
| - | def test_13_04_proxys_auth(self, env: Env, httpd, nghttpx_fwd, repeat): |
| + | def test_13_04_proxys_auth(self, env: Env, httpd, nghttpx_fwd): |
| curl = CurlClient(env=env) | |
| url = f'http://localhost:{env.http_port}/data.json' | |
| xargs = curl.get_proxy_args(proxys=True) | |
| @@ -98,7 +98,7 @@ class TestProxyAuth: | |
| extra_args=xargs) | |
| r.check_response(count=1, http_status=200) | |
| - | def test_13_05_tunnel_http_no_auth(self, env: Env, httpd, repeat): |
| + | def test_13_05_tunnel_http_no_auth(self, env: Env, httpd): |
| curl = CurlClient(env=env) | |
| url = f'http://localhost:{env.http_port}/data.json' | |
| xargs = curl.get_proxy_args(proxys=False, tunnel=True) | |
| @@ -107,7 +107,7 @@ class TestProxyAuth: | |
| # expect "COULD_NOT_CONNECT" | |
| r.check_response(exitcode=56, http_status=None) | |
| - | def test_13_06_tunnel_http_auth(self, env: Env, httpd, repeat): |
| + | def test_13_06_tunnel_http_auth(self, env: Env, httpd): |
| curl = CurlClient(env=env) | |
| url = f'http://localhost:{env.http_port}/data.json' | |
| xargs = curl.get_proxy_args(proxys=False, tunnel=True) | |
| @@ -121,7 +121,7 @@ class TestProxyAuth: | |
| reason='curl lacks HTTPS-proxy support') | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2']) | |
| @pytest.mark.parametrize("tunnel", ['http/1.1', 'h2']) | |
| - | def test_13_07_tunnels_no_auth(self, env: Env, httpd, proto, tunnel, repeat): |
| + | def test_13_07_tunnels_no_auth(self, env: Env, httpd, proto, tunnel): |
| if tunnel == 'h2' and not env.curl_uses_lib('nghttp2'): | |
| pytest.skip('only supported with nghttp2') | |
| curl = CurlClient(env=env) | |
| @@ -139,7 +139,7 @@ class TestProxyAuth: | |
| reason='curl lacks HTTPS-proxy support') | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2']) | |
| @pytest.mark.parametrize("tunnel", ['http/1.1', 'h2']) | |
| - | def test_13_08_tunnels_auth(self, env: Env, httpd, proto, tunnel, repeat): |
| + | def test_13_08_tunnels_auth(self, env: Env, httpd, proto, tunnel): |
| if tunnel == 'h2' and not env.curl_uses_lib('nghttp2'): | |
| pytest.skip('only supported with nghttp2') | |
| curl = CurlClient(env=env) | |
| @@ -46,7 +46,7 @@ class TestAuth: | |
| # download 1 file, not authenticated | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_14_01_digest_get_noauth(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_14_01_digest_get_noauth(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| curl = CurlClient(env=env) | |
| @@ -56,7 +56,7 @@ class TestAuth: | |
| # download 1 file, authenticated | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_14_02_digest_get_auth(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_14_02_digest_get_auth(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| curl = CurlClient(env=env) | |
| @@ -68,7 +68,7 @@ class TestAuth: | |
| # PUT data, authenticated | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_14_03_digest_put_auth(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_14_03_digest_put_auth(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| data='0123456789' | |
| @@ -81,7 +81,7 @@ class TestAuth: | |
| # PUT data, digest auth large pw | |
| @pytest.mark.parametrize("proto", ['h2', 'h3']) | |
| - | def test_14_04_digest_large_pw(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_14_04_digest_large_pw(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| data='0123456789' | |
| @@ -98,7 +98,7 @@ class TestAuth: | |
| # PUT data, basic auth large pw | |
| @pytest.mark.parametrize("proto", ['h2', 'h3']) | |
| - | def test_14_05_basic_large_pw(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_14_05_basic_large_pw(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and not env.curl_uses_lib('ngtcp2'): | |
| @@ -118,7 +118,7 @@ class TestAuth: | |
| # PUT data, basic auth with very large pw | |
| @pytest.mark.parametrize("proto", ['h2', 'h3']) | |
| - | def test_14_06_basic_very_large_pw(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_14_06_basic_very_large_pw(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if proto == 'h3' and env.curl_uses_lib('quiche'): | |
| @@ -52,7 +52,7 @@ class TestInfo: | |
| # download plain file | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_16_01_info_download(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_16_01_info_download(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 2 | |
| @@ -67,7 +67,7 @@ class TestInfo: | |
| # download plain file with a 302 redirect | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_16_02_info_302_download(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_16_02_info_302_download(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 2 | |
| @@ -83,7 +83,7 @@ class TestInfo: | |
| self.check_stat(idx, s, r, dl_size=30, ul_size=0) | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_16_03_info_upload(self, env: Env, httpd, nghttpx, proto, repeat): |
| + | def test_16_03_info_upload(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 2 | |
| @@ -104,7 +104,7 @@ class TestInfo: | |
| # download plain file via http: ('time_appconnect' is 0) | |
| @pytest.mark.parametrize("proto", ['http/1.1']) | |
| - | def test_16_04_info_http_download(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_16_04_info_http_download(self, env: Env, httpd, nghttpx, proto): |
| count = 2 | |
| curl = CurlClient(env=env) | |
| url = f'http://{env.domain1}:{env.http_port}/data.json?[0-{count-1}]' | |
| @@ -50,7 +50,7 @@ class TestSSLUse: | |
| if 'httpd' not in request.node._fixtureinfo.argnames: | |
| httpd.reload_if_config_changed() | |
| - | def test_17_01_sslinfo_plain(self, env: Env, nghttpx, repeat): |
| + | def test_17_01_sslinfo_plain(self, env: Env, nghttpx): |
| proto = 'http/1.1' | |
| curl = CurlClient(env=env) | |
| url = f'https://{env.authority_for(env.domain1, proto)}/curltest/sslinfo' | |
| @@ -48,7 +48,7 @@ class TestMethods: | |
| # download 1 file | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2', 'h3']) | |
| - | def test_18_01_delete(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_18_01_delete(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| count = 1 | |
| @@ -61,7 +61,7 @@ class TestMethods: | |
| # - HEADER frame with 204 and eos=0 | |
| # - 10ms later DATA frame length=0 and eos=1 | |
| # should be accepted | |
| - | def test_18_02_delete_h2_special(self, env: Env, httpd, nghttpx, repeat): |
| + | def test_18_02_delete_h2_special(self, env: Env, httpd, nghttpx): |
| proto = 'h2' | |
| count = 1 | |
| curl = CurlClient(env=env) | |
| @@ -53,7 +53,7 @@ class TestShutdown: | |
| # check with `tcpdump` that we see curl TCP RST packets | |
| @pytest.mark.skipif(condition=not Env.tcpdump(), reason="tcpdump not available") | |
| @pytest.mark.parametrize("proto", ['http/1.1']) | |
| - | def test_19_01_check_tcp_rst(self, env: Env, httpd, repeat, proto): |
| + | def test_19_01_check_tcp_rst(self, env: Env, httpd, proto): |
| if env.ci_run: | |
| pytest.skip("seems not to work in CI") | |
| curl = CurlClient(env=env) | |
| @@ -68,7 +68,7 @@ class TestShutdown: | |
| # check with `tcpdump` that we do NOT see TCP RST when CURL_GRACEFUL_SHUTDOWN set | |
| @pytest.mark.skipif(condition=not Env.tcpdump(), reason="tcpdump not available") | |
| @pytest.mark.parametrize("proto", ['http/1.1', 'h2']) | |
| - | def test_19_02_check_shutdown(self, env: Env, httpd, repeat, proto): |
| + | def test_19_02_check_shutdown(self, env: Env, httpd, proto): |
| if not env.curl_is_debug(): | |
| pytest.skip('only works for curl debug builds') | |
| curl = CurlClient(env=env, run_env={ | |
| @@ -85,7 +85,7 @@ class TestShutdown: | |
| # run downloads where the server closes the connection after each request | |
| @pytest.mark.parametrize("proto", ['http/1.1']) | |
| - | def test_19_03_shutdown_by_server(self, env: Env, httpd, repeat, proto): |
| + | def test_19_03_shutdown_by_server(self, env: Env, httpd, proto): |
| if not env.curl_is_debug(): | |
| pytest.skip('only works for curl debug builds') | |
| count = 10 | |
| @@ -104,7 +104,7 @@ class TestShutdown: | |
| # run downloads with CURLOPT_FORBID_REUSE set, meaning *we* close | |
| # the connection after each request | |
| @pytest.mark.parametrize("proto", ['http/1.1']) | |
| - | def test_19_04_shutdown_by_curl(self, env: Env, httpd, proto, repeat): |
| + | def test_19_04_shutdown_by_curl(self, env: Env, httpd, proto): |
| if not env.curl_is_debug(): | |
| pytest.skip('only works for curl debug builds') | |
| count = 10 | |
| @@ -127,7 +127,7 @@ class TestShutdown: | |
| # run event-based downloads with CURLOPT_FORBID_REUSE set, meaning *we* close | |
| # the connection after each request | |
| @pytest.mark.parametrize("proto", ['http/1.1']) | |
| - | def test_19_05_event_shutdown_by_server(self, env: Env, httpd, proto, repeat): |
| + | def test_19_05_event_shutdown_by_server(self, env: Env, httpd, proto): |
| if not env.curl_is_debug(): | |
| pytest.skip('only works for curl debug builds') | |
| count = 10 | |
| @@ -155,7 +155,7 @@ class TestShutdown: | |
| # check graceful shutdown on multiplexed http | |
| @pytest.mark.parametrize("proto", ['h2', 'h3']) | |
| - | def test_19_06_check_shutdown(self, env: Env, httpd, nghttpx, repeat, proto): |
| + | def test_19_06_check_shutdown(self, env: Env, httpd, nghttpx, proto): |
| if proto == 'h3' and not env.have_h3(): | |
| pytest.skip("h3 not supported") | |
| if not env.curl_is_debug(): | |
| @@ -78,13 +78,13 @@ class TestWebsockets: | |
| yield | |
| p.terminate() | |
| - | def test_20_01_basic(self, env: Env, ws_echo, repeat): |
| + | def test_20_01_basic(self, env: Env, ws_echo): |
| curl = CurlClient(env=env) | |
| url = f'http://localhost:{env.ws_port}/' | |
| r = curl.http_download(urls=[url]) | |
| r.check_response(http_status=426) | |
| - | def test_20_02_pingpong_small(self, env: Env, ws_echo, repeat): |
| + | def test_20_02_pingpong_small(self, env: Env, ws_echo): |
| payload = 125 * "x" | |
| client = LocalClient(env=env, name='ws-pingpong') | |
| if not client.exists(): | |
| @@ -94,7 +94,7 @@ class TestWebsockets: | |
| r.check_exit_code(0) | |
| # the python websocket server does not like 'large' control frames | |
| - | def test_20_03_pingpong_too_large(self, env: Env, ws_echo, repeat): |
| + | def test_20_03_pingpong_too_large(self, env: Env, ws_echo): |
| payload = 127 * "x" | |
| client = LocalClient(env=env, name='ws-pingpong') | |
| if not client.exists(): | |
| @@ -103,7 +103,7 @@ class TestWebsockets: | |
| r = client.run(args=[url, payload]) | |
| r.check_exit_code(56) | |
| - | def test_20_04_data_small(self, env: Env, ws_echo, repeat): |
| + | def test_20_04_data_small(self, env: Env, ws_echo): |
| client = LocalClient(env=env, name='ws-data') | |
| if not client.exists(): | |
| pytest.skip(f'example client not built: {client.name}') | |
| @@ -111,7 +111,7 @@ class TestWebsockets: | |
| r = client.run(args=['-m', str(0), '-M', str(10), url]) | |
| r.check_exit_code(0) | |
| - | def test_20_05_data_med(self, env: Env, ws_echo, repeat): |
| + | def test_20_05_data_med(self, env: Env, ws_echo): |
| client = LocalClient(env=env, name='ws-data') | |
| if not client.exists(): | |
| pytest.skip(f'example client not built: {client.name}') | |
| @@ -119,7 +119,7 @@ class TestWebsockets: | |
| r = client.run(args=['-m', str(120), '-M', str(130), url]) | |
| r.check_exit_code(0) | |
| - | def test_20_06_data_large(self, env: Env, ws_echo, repeat): |
| + | def test_20_06_data_large(self, env: Env, ws_echo): |
| client = LocalClient(env=env, name='ws-data') | |
| if not client.exists(): | |
| pytest.skip(f'example client not built: {client.name}') | |
| @@ -127,7 +127,7 @@ class TestWebsockets: | |
| r = client.run(args=['-m', str(65535 - 5), '-M', str(65535 + 5), url]) | |
| r.check_exit_code(0) | |
| - | def test_20_07_data_large_small_recv(self, env: Env, ws_echo, repeat): |
| + | def test_20_07_data_large_small_recv(self, env: Env, ws_echo): |
| run_env = os.environ.copy() | |
| run_env['CURL_WS_CHUNK_SIZE'] = '1024' | |
| client = LocalClient(env=env, name='ws-data', run_env=run_env) | |
| @@ -139,7 +139,7 @@ class TestWebsockets: | |
| # Send large frames and simulate send blocking on 8192 bytes chunks | |
| # Simlates error reported in #15865 | |
| - | def test_20_08_data_very_large(self, env: Env, ws_echo, repeat): |
| + | def test_20_08_data_very_large(self, env: Env, ws_echo): |
| run_env = os.environ.copy() | |
| run_env['CURL_WS_CHUNK_EAGAIN'] = '8192' | |
| client = LocalClient(env=env, name='ws-data', run_env=run_env) | |
| @@ -71,7 +71,7 @@ class TestVsFTPD: | |
| env.make_data_file(indir=env.gen_dir, fname="upload-100k", fsize=100*1024) | |
| env.make_data_file(indir=env.gen_dir, fname="upload-1m", fsize=1024*1024) | |
| - | def test_30_01_list_dir(self, env: Env, vsftpd: VsFTPD, repeat): |
| + | def test_30_01_list_dir(self, env: Env, vsftpd: VsFTPD): |
| curl = CurlClient(env=env) | |
| url = f'ftp://{env.ftp_domain}:{vsftpd.port}/' | |
| r = curl.ftp_get(urls=[url], with_stats=True) | |
| @@ -83,7 +83,7 @@ class TestVsFTPD: | |
| @pytest.mark.parametrize("docname", [ | |
| 'data-1k', 'data-1m', 'data-10m' | |
| ]) | |
| - | def test_30_02_download_1(self, env: Env, vsftpd: VsFTPD, docname, repeat): |
| + | def test_30_02_download_1(self, env: Env, vsftpd: VsFTPD, docname): |
| curl = CurlClient(env=env) | |
| srcfile = os.path.join(vsftpd.docs_dir, f'{docname}') | |
| count = 1 | |
| @@ -95,7 +95,7 @@ class TestVsFTPD: | |
| @pytest.mark.parametrize("docname", [ | |
| 'data-1k', 'data-1m', 'data-10m' | |
| ]) | |
| - | def test_30_03_download_10_serial(self, env: Env, vsftpd: VsFTPD, docname, repeat): |
| + | def test_30_03_download_10_serial(self, env: Env, vsftpd: VsFTPD, docname): |
| curl = CurlClient(env=env) | |
| srcfile = os.path.join(vsftpd.docs_dir, f'{docname}') | |
| count = 10 | |
| @@ -107,7 +107,7 @@ class TestVsFTPD: | |
| @pytest.mark.parametrize("docname", [ | |
| 'data-1k', 'data-1m', 'data-10m' | |
| ]) | |
| - | def test_30_04_download_10_parallel(self, env: Env, vsftpd: VsFTPD, docname, repeat): |
| + | def test_30_04_download_10_parallel(self, env: Env, vsftpd: VsFTPD, docname): |
| curl = CurlClient(env=env) | |
| srcfile = os.path.join(vsftpd.docs_dir, f'{docname}') | |
| count = 10 | |
| @@ -121,7 +121,7 @@ class TestVsFTPD: | |
| @pytest.mark.parametrize("docname", [ | |
| 'upload-1k', 'upload-100k', 'upload-1m' | |
| ]) | |
| - | def test_30_05_upload_1(self, env: Env, vsftpd: VsFTPD, docname, repeat): |
| + | def test_30_05_upload_1(self, env: Env, vsftpd: VsFTPD, docname): |
| curl = CurlClient(env=env) | |
| srcfile = os.path.join(env.gen_dir, docname) | |
| dstfile = os.path.join(vsftpd.docs_dir, docname) | |
| @@ -138,7 +138,7 @@ class TestVsFTPD: | |
| # check with `tcpdump` if curl causes any TCP RST packets | |
| @pytest.mark.skipif(condition=not Env.tcpdump(), reason="tcpdump not available") | |
| - | def test_30_06_shutdownh_download(self, env: Env, vsftpd: VsFTPD, repeat): |
| + | def test_30_06_shutdownh_download(self, env: Env, vsftpd: VsFTPD): |
| docname = 'data-1k' | |
| curl = CurlClient(env=env) | |
| count = 1 | |
| @@ -150,7 +150,7 @@ class TestVsFTPD: | |
| # check with `tcpdump` if curl causes any TCP RST packets | |
| @pytest.mark.skipif(condition=not Env.tcpdump(), reason="tcpdump not available") | |
| - | def test_30_07_shutdownh_upload(self, env: Env, vsftpd: VsFTPD, repeat): |
| + | def test_30_07_shutdownh_upload(self, env: Env, vsftpd: VsFTPD): |
| docname = 'upload-1k' | |
| curl = CurlClient(env=env) | |
| srcfile = os.path.join(env.gen_dir, docname) | |
| @@ -78,7 +78,7 @@ class TestVsFTPD: | |
| env.make_data_file(indir=env.gen_dir, fname="upload-100k", fsize=100*1024) | |
| env.make_data_file(indir=env.gen_dir, fname="upload-1m", fsize=1024*1024) | |
| - | def test_31_01_list_dir(self, env: Env, vsftpds: VsFTPD, repeat): |
| + | def test_31_01_list_dir(self, env: Env, vsftpds: VsFTPD): |
| curl = CurlClient(env=env) | |
| url = f'ftp://{env.ftp_domain}:{vsftpds.port}/' | |
| r = curl.ftp_ssl_get(urls=[url], with_stats=True) | |
| @@ -90,7 +90,7 @@ class TestVsFTPD: | |
| @pytest.mark.parametrize("docname", [ | |
| 'data-1k', 'data-1m', 'data-10m' | |
| ]) | |
| - | def test_31_02_download_1(self, env: Env, vsftpds: VsFTPD, docname, repeat): |
| + | def test_31_02_download_1(self, env: Env, vsftpds: VsFTPD, docname): |
| curl = CurlClient(env=env) | |
| srcfile = os.path.join(vsftpds.docs_dir, f'{docname}') | |
| count = 1 | |
| @@ -102,7 +102,7 @@ class TestVsFTPD: | |
| @pytest.mark.parametrize("docname", [ | |
| 'data-1k', 'data-1m', 'data-10m' | |
| ]) | |
| - | def test_31_03_download_10_serial(self, env: Env, vsftpds: VsFTPD, docname, repeat): |
| + | def test_31_03_download_10_serial(self, env: Env, vsftpds: VsFTPD, docname): |
| curl = CurlClient(env=env) | |
| srcfile = os.path.join(vsftpds.docs_dir, f'{docname}') | |
| count = 10 | |
| @@ -114,7 +114,7 @@ class TestVsFTPD: | |
| @pytest.mark.parametrize("docname", [ | |
| 'data-1k', 'data-1m', 'data-10m' | |
| ]) | |
| - | def test_31_04_download_10_parallel(self, env: Env, vsftpds: VsFTPD, docname, repeat): |
| + | def test_31_04_download_10_parallel(self, env: Env, vsftpds: VsFTPD, docname): |
| curl = CurlClient(env=env) | |
| srcfile = os.path.join(vsftpds.docs_dir, f'{docname}') | |
| count = 10 | |
| @@ -128,7 +128,7 @@ class TestVsFTPD: | |
| @pytest.mark.parametrize("docname", [ | |
| 'upload-1k', 'upload-100k', 'upload-1m' | |
| ]) | |
| - | def test_31_05_upload_1(self, env: Env, vsftpds: VsFTPD, docname, repeat): |
| + | def test_31_05_upload_1(self, env: Env, vsftpds: VsFTPD, docname): |
| curl = CurlClient(env=env) | |
| srcfile = os.path.join(env.gen_dir, docname) | |
| dstfile = os.path.join(vsftpds.docs_dir, docname) | |
| @@ -145,7 +145,7 @@ class TestVsFTPD: | |
| # check with `tcpdump` if curl causes any TCP RST packets | |
| @pytest.mark.skipif(condition=not Env.tcpdump(), reason="tcpdump not available") | |
| - | def test_31_06_shutdownh_download(self, env: Env, vsftpds: VsFTPD, repeat): |
| + | def test_31_06_shutdownh_download(self, env: Env, vsftpds: VsFTPD): |
| docname = 'data-1k' | |
| curl = CurlClient(env=env) | |
| count = 1 | |
| @@ -158,7 +158,7 @@ class TestVsFTPD: | |
| # check with `tcpdump` if curl causes any TCP RST packets | |
| @pytest.mark.skipif(condition=not Env.tcpdump(), reason="tcpdump not available") | |
| - | def test_31_07_shutdownh_upload(self, env: Env, vsftpds: VsFTPD, repeat): |
| + | def test_31_07_shutdownh_upload(self, env: Env, vsftpds: VsFTPD): |
| docname = 'upload-1k' | |
| curl = CurlClient(env=env) | |
| srcfile = os.path.join(env.gen_dir, docname) | |