← Commit list

f540e43b9d

Daniel Stenberg

2024-02-27

SUCCESS Duration: 93s

Subject

examples: use present tense in comments

Binary

Download Binary (861 KB)

Architecture & Compiler Flags

Architecture: x86_64-linux-gnu Compiler: gcc (Ubuntu 11.4.0-1ubuntu1~22.04.3) 11.4.0

—

Build Log

$ git checkout -f f540e43b9db8a507e1afa83a66b059aff7c965f2
Previous HEAD position was 01b42aa08b TODO: Select signature algorithms
HEAD is now at f540e43b9d examples: use present tense in comments

$ git clean -fdx
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing curl-config
Removing depcomp
Removing docs/Makefile
Removing docs/Makefile.in
Removing docs/cmdline-opts/Makefile
Removing docs/cmdline-opts/Makefile.in
Removing docs/curl-config.1
Removing docs/curl.1
Removing docs/examples/.deps/
Removing docs/examples/Makefile
Removing docs/examples/Makefile.in
Removing docs/libcurl/Makefile
Removing docs/libcurl/Makefile.in
Removing docs/libcurl/opts/Makefile
Removing docs/libcurl/opts/Makefile.in
Removing include/Makefile
Removing include/Makefile.in
Removing include/curl/Makefile
Removing include/curl/Makefile.in
Removing install-sh
Removing lib/.deps/
Removing lib/.dirstamp
Removing lib/.libs/
Removing lib/Makefile
Removing lib/Makefile.in
Removing lib/base64.o
Removing lib/curl_config.h
Removing lib/curl_config.h.in
Removing lib/curl_multibyte.o
Removing lib/dynbuf.o
Removing lib/libcurl.la
Removing lib/libcurl.plist
Removing lib/libcurl.vers
Removing lib/libcurl_la-altsvc.lo
Removing lib/libcurl_la-altsvc.o
Removing lib/libcurl_la-amigaos.lo
Removing lib/libcurl_la-amigaos.o
Removing lib/libcurl_la-asyn-ares.lo
Removing lib/libcurl_la-asyn-ares.o
Removing lib/libcurl_la-asyn-thread.lo
Removing lib/libcurl_la-asyn-thread.o
Removing lib/libcurl_la-base64.lo
Removing lib/libcurl_la-base64.o
Removing lib/libcurl_la-bufq.lo
Removing lib/libcurl_la-bufq.o
Removing lib/libcurl_la-bufref.lo
Removing lib/libcurl_la-bufref.o
Removing lib/libcurl_la-c-hyper.lo
Removing lib/libcurl_la-c-hyper.o
Removing lib/libcurl_la-cf-h1-proxy.lo
Removing lib/libcurl_la-cf-h1-proxy.o
Removing lib/libcurl_la-cf-h2-proxy.lo
Removing lib/libcurl_la-cf-h2-proxy.o
Removing lib/libcurl_la-cf-haproxy.lo
Removing lib/libcurl_la-cf-haproxy.o
Removing lib/libcurl_la-cf-https-connect.lo
Removing lib/libcurl_la-cf-https-connect.o
Removing lib/libcurl_la-cf-socket.lo
Removing lib/libcurl_la-cf-socket.o
Removing lib/libcurl_la-cfilters.lo
Removing lib/libcurl_la-cfilters.o
Removing lib/libcurl_la-conncache.lo
Removing lib/libcurl_la-conncache.o
Removing lib/libcurl_la-connect.lo
Removing lib/libcurl_la-connect.o
Removing lib/libcurl_la-content_encoding.lo
Removing lib/libcurl_la-content_encoding.o
Removing lib/libcurl_la-cookie.lo
Removing lib/libcurl_la-cookie.o
Removing lib/libcurl_la-curl_addrinfo.lo
Removing lib/libcurl_la-curl_addrinfo.o
Removing lib/libcurl_la-curl_des.lo
Removing lib/libcurl_la-curl_des.o
Removing lib/libcurl_la-curl_endian.lo
Removing lib/libcurl_la-curl_endian.o
Removing lib/libcurl_la-curl_fnmatch.lo
Removing lib/libcurl_la-curl_fnmatch.o
Removing lib/libcurl_la-curl_get_line.lo
Removing lib/libcurl_la-curl_get_line.o
Removing lib/libcurl_la-curl_gethostname.lo
Removing lib/libcurl_la-curl_gethostname.o
Removing lib/libcurl_la-curl_gssapi.lo
Removing lib/libcurl_la-curl_gssapi.o
Removing lib/libcurl_la-curl_memrchr.lo
Removing lib/libcurl_la-curl_memrchr.o
Removing lib/libcurl_la-curl_multibyte.lo
Removing lib/libcurl_la-curl_multibyte.o
Removing lib/libcurl_la-curl_ntlm_core.lo
Removing lib/libcurl_la-curl_ntlm_core.o
Removing lib/libcurl_la-curl_ntlm_wb.lo
Removing lib/libcurl_la-curl_ntlm_wb.o
Removing lib/libcurl_la-curl_path.lo
Removing lib/libcurl_la-curl_path.o
Removing lib/libcurl_la-curl_range.lo
Removing lib/libcurl_la-curl_range.o
Removing lib/libcurl_la-curl_rtmp.lo
Removing lib/libcurl_la-curl_rtmp.o
Removing lib/libcurl_la-curl_sasl.lo
Removing lib/libcurl_la-curl_sasl.o
Removing lib/libcurl_la-curl_sha512_256.lo
Removing lib/libcurl_la-curl_sha512_256.o
Removing lib/libcurl_la-curl_sspi.lo
Removing lib/libcurl_la-curl_sspi.o
Removing lib/libcurl_la-curl_threads.lo
Removing lib/libcurl_la-curl_threads.o
Removing lib/libcurl_la-curl_trc.lo
Removing lib/libcurl_la-curl_trc.o
Removing lib/libcurl_la-cw-out.lo
Removing lib/libcurl_la-cw-out.o
Removing lib/libcurl_la-dict.lo
Removing lib/libcurl_la-dict.o
Removing lib/libcurl_la-doh.lo
Removing lib/libcurl_la-doh.o
Removing lib/libcurl_la-dynbuf.lo
Removing lib/libcurl_la-dynbuf.o
Removing lib/libcurl_la-dynhds.lo
Removing lib/libcurl_la-dynhds.o
Removing lib/libcurl_la-easy.lo
Removing lib/libcurl_la-easy.o
Removing lib/libcurl_la-easygetopt.lo
Removing lib/libcurl_la-easygetopt.o
Removing lib/libcurl_la-easyoptions.lo
Removing lib/libcurl_la-easyoptions.o
Removing lib/libcurl_la-escape.lo
Removing lib/libcurl_la-escape.o
Removing lib/libcurl_la-file.lo
Removing lib/libcurl_la-file.o
Removing lib/libcurl_la-fileinfo.lo
Removing lib/libcurl_la-fileinfo.o
Removing lib/libcurl_la-fopen.lo
Removing lib/libcurl_la-fopen.o
Removing lib/libcurl_la-formdata.lo
Removing lib/libcurl_la-formdata.o
Removing lib/libcurl_la-ftp.lo
Removing lib/libcurl_la-ftp.o
Removing lib/libcurl_la-ftplistparser.lo
Removing lib/libcurl_la-ftplistparser.o
Removing lib/libcurl_la-getenv.lo
Removing lib/libcurl_la-getenv.o
Removing lib/libcurl_la-getinfo.lo
Removing lib/libcurl_la-getinfo.o
Removing lib/libcurl_la-gopher.lo
Removing lib/libcurl_la-gopher.o
Removing lib/libcurl_la-hash.lo
Removing lib/libcurl_la-hash.o
Removing lib/libcurl_la-headers.lo
Removing lib/libcurl_la-headers.o
Removing lib/libcurl_la-hmac.lo
Removing lib/libcurl_la-hmac.o
Removing lib/libcurl_la-hostasyn.lo
Removing lib/libcurl_la-hostasyn.o
Removing lib/libcurl_la-hostip.lo
Removing lib/libcurl_la-hostip.o
Removing lib/libcurl_la-hostip4.lo
Removing lib/libcurl_la-hostip4.o
Removing lib/libcurl_la-hostip6.lo
Removing lib/libcurl_la-hostip6.o
Removing lib/libcurl_la-hostsyn.lo
Removing lib/libcurl_la-hostsyn.o
Removing lib/libcurl_la-hsts.lo
Removing lib/libcurl_la-hsts.o
Removing lib/libcurl_la-http.lo
Removing lib/libcurl_la-http.o
Removing lib/libcurl_la-http1.lo
Removing lib/libcurl_la-http1.o
Removing lib/libcurl_la-http2.lo
Removing lib/libcurl_la-http2.o
Removing lib/libcurl_la-http_aws_sigv4.lo
Removing lib/libcurl_la-http_aws_sigv4.o
Removing lib/libcurl_la-http_chunks.lo
Removing lib/libcurl_la-http_chunks.o
Removing lib/libcurl_la-http_digest.lo
Removing lib/libcurl_la-http_digest.o
Removing lib/libcurl_la-http_negotiate.lo
Removing lib/libcurl_la-http_negotiate.o
Removing lib/libcurl_la-http_ntlm.lo
Removing lib/libcurl_la-http_ntlm.o
Removing lib/libcurl_la-http_proxy.lo
Removing lib/libcurl_la-http_proxy.o
Removing lib/libcurl_la-idn.lo
Removing lib/libcurl_la-idn.o
Removing lib/libcurl_la-if2ip.lo
Removing lib/libcurl_la-if2ip.o
Removing lib/libcurl_la-imap.lo
Removing lib/libcurl_la-imap.o
Removing lib/libcurl_la-inet_ntop.lo
Removing lib/libcurl_la-inet_ntop.o
Removing lib/libcurl_la-inet_pton.lo
Removing lib/libcurl_la-inet_pton.o
Removing lib/libcurl_la-krb5.lo
Removing lib/libcurl_la-krb5.o
Removing lib/libcurl_la-ldap.lo
Removing lib/libcurl_la-ldap.o
Removing lib/libcurl_la-llist.lo
Removing lib/libcurl_la-llist.o
Removing lib/libcurl_la-macos.lo
Removing lib/libcurl_la-macos.o
Removing lib/libcurl_la-md4.lo
Removing lib/libcurl_la-md4.o
Removing lib/libcurl_la-md5.lo
Removing lib/libcurl_la-md5.o
Removing lib/libcurl_la-memdebug.lo
Removing lib/libcurl_la-memdebug.o
Removing lib/libcurl_la-mime.lo
Removing lib/libcurl_la-mime.o
Removing lib/libcurl_la-mprintf.lo
Removing lib/libcurl_la-mprintf.o
Removing lib/libcurl_la-mqtt.lo
Removing lib/libcurl_la-mqtt.o
Removing lib/libcurl_la-multi.lo
Removing lib/libcurl_la-multi.o
Removing lib/libcurl_la-netrc.lo
Removing lib/libcurl_la-netrc.o
Removing lib/libcurl_la-nonblock.lo
Removing lib/libcurl_la-nonblock.o
Removing lib/libcurl_la-noproxy.lo
Removing lib/libcurl_la-noproxy.o
Removing lib/libcurl_la-openldap.lo
Removing lib/libcurl_la-openldap.o
Removing lib/libcurl_la-parsedate.lo
Removing lib/libcurl_la-parsedate.o
Removing lib/libcurl_la-pingpong.lo
Removing lib/libcurl_la-pingpong.o
Removing lib/libcurl_la-pop3.lo
Removing lib/libcurl_la-pop3.o
Removing lib/libcurl_la-progress.lo
Removing lib/libcurl_la-progress.o
Removing lib/libcurl_la-psl.lo
Removing lib/libcurl_la-psl.o
Removing lib/libcurl_la-rand.lo
Removing lib/libcurl_la-rand.o
Removing lib/libcurl_la-rename.lo
Removing lib/libcurl_la-rename.o
Removing lib/libcurl_la-request.lo
Removing lib/libcurl_la-request.o
Removing lib/libcurl_la-rtsp.lo
Removing lib/libcurl_la-rtsp.o
Removing lib/libcurl_la-select.lo
Removing lib/libcurl_la-select.o
Removing lib/libcurl_la-sendf.lo
Removing lib/libcurl_la-sendf.o
Removing lib/libcurl_la-setopt.lo
Removing lib/libcurl_la-setopt.o
Removing lib/libcurl_la-sha256.lo
Removing lib/libcurl_la-sha256.o
Removing lib/libcurl_la-share.lo
Removing lib/libcurl_la-share.o
Removing lib/libcurl_la-slist.lo
Removing lib/libcurl_la-slist.o
Removing lib/libcurl_la-smb.lo
Removing lib/libcurl_la-smb.o
Removing lib/libcurl_la-smtp.lo
Removing lib/libcurl_la-smtp.o
Removing lib/libcurl_la-socketpair.lo
Removing lib/libcurl_la-socketpair.o
Removing lib/libcurl_la-socks.lo
Removing lib/libcurl_la-socks.o
Removing lib/libcurl_la-socks_gssapi.lo
Removing lib/libcurl_la-socks_gssapi.o
Removing lib/libcurl_la-socks_sspi.lo
Removing lib/libcurl_la-socks_sspi.o
Removing lib/libcurl_la-speedcheck.lo
Removing lib/libcurl_la-speedcheck.o
Removing lib/libcurl_la-splay.lo
Removing lib/libcurl_la-splay.o
Removing lib/libcurl_la-strcase.lo
Removing lib/libcurl_la-strcase.o
Removing lib/libcurl_la-strdup.lo
Removing lib/libcurl_la-strdup.o
Removing lib/libcurl_la-strerror.lo
Removing lib/libcurl_la-strerror.o
Removing lib/libcurl_la-strtok.lo
Removing lib/libcurl_la-strtok.o
Removing lib/libcurl_la-strtoofft.lo
Removing lib/libcurl_la-strtoofft.o
Removing lib/libcurl_la-system_win32.lo
Removing lib/libcurl_la-system_win32.o
Removing lib/libcurl_la-telnet.lo
Removing lib/libcurl_la-telnet.o
Removing lib/libcurl_la-tftp.lo
Removing lib/libcurl_la-tftp.o
Removing lib/libcurl_la-timediff.lo
Removing lib/libcurl_la-timediff.o
Removing lib/libcurl_la-timeval.lo
Removing lib/libcurl_la-timeval.o
Removing lib/libcurl_la-transfer.lo
Removing lib/libcurl_la-transfer.o
Removing lib/libcurl_la-url.lo
Removing lib/libcurl_la-url.o
Removing lib/libcurl_la-urlapi.lo
Removing lib/libcurl_la-urlapi.o
Removing lib/libcurl_la-version.lo
Removing lib/libcurl_la-version.o
Removing lib/libcurl_la-version_win32.lo
Removing lib/libcurl_la-version_win32.o
Removing lib/libcurl_la-warnless.lo
Removing lib/libcurl_la-warnless.o
Removing lib/libcurl_la-ws.lo
Removing lib/libcurl_la-ws.o
Removing lib/nonblock.o
Removing lib/stamp-h1
Removing lib/strtoofft.o
Removing lib/timediff.o
Removing lib/vauth/.deps/
Removing lib/vauth/.dirstamp
Removing lib/vauth/libcurl_la-cleartext.lo
Removing lib/vauth/libcurl_la-cleartext.o
Removing lib/vauth/libcurl_la-cram.lo
Removing lib/vauth/libcurl_la-cram.o
Removing lib/vauth/libcurl_la-digest.lo
Removing lib/vauth/libcurl_la-digest.o
Removing lib/vauth/libcurl_la-digest_sspi.lo
Removing lib/vauth/libcurl_la-digest_sspi.o
Removing lib/vauth/libcurl_la-gsasl.lo
Removing lib/vauth/libcurl_la-gsasl.o
Removing lib/vauth/libcurl_la-krb5_gssapi.lo
Removing lib/vauth/libcurl_la-krb5_gssapi.o
Removing lib/vauth/libcurl_la-krb5_sspi.lo
Removing lib/vauth/libcurl_la-krb5_sspi.o
Removing lib/vauth/libcurl_la-ntlm.lo
Removing lib/vauth/libcurl_la-ntlm.o
Removing lib/vauth/libcurl_la-ntlm_sspi.lo
Removing lib/vauth/libcurl_la-ntlm_sspi.o
Removing lib/vauth/libcurl_la-oauth2.lo
Removing lib/vauth/libcurl_la-oauth2.o
Removing lib/vauth/libcurl_la-spnego_gssapi.lo
Removing lib/vauth/libcurl_la-spnego_gssapi.o
Removing lib/vauth/libcurl_la-spnego_sspi.lo
Removing lib/vauth/libcurl_la-spnego_sspi.o
Removing lib/vauth/libcurl_la-vauth.lo
Removing lib/vauth/libcurl_la-vauth.o
Removing lib/version_win32.o
Removing lib/vquic/.deps/
Removing lib/vquic/.dirstamp
Removing lib/vquic/libcurl_la-curl_msh3.lo
Removing lib/vquic/libcurl_la-curl_msh3.o
Removing lib/vquic/libcurl_la-curl_ngtcp2.lo
Removing lib/vquic/libcurl_la-curl_ngtcp2.o
Removing lib/vquic/libcurl_la-curl_osslq.lo
Removing lib/vquic/libcurl_la-curl_osslq.o
Removing lib/vquic/libcurl_la-curl_quiche.lo
Removing lib/vquic/libcurl_la-curl_quiche.o
Removing lib/vquic/libcurl_la-vquic-tls.lo
Removing lib/vquic/libcurl_la-vquic-tls.o
Removing lib/vquic/libcurl_la-vquic.lo
Removing lib/vquic/libcurl_la-vquic.o
Removing lib/vssh/.deps/
Removing lib/vssh/.dirstamp
Removing lib/vssh/libcurl_la-libssh.lo
Removing lib/vssh/libcurl_la-libssh.o
Removing lib/vssh/libcurl_la-libssh2.lo
Removing lib/vssh/libcurl_la-libssh2.o
Removing lib/vssh/libcurl_la-wolfssh.lo
Removing lib/vssh/libcurl_la-wolfssh.o
Removing lib/vtls/.deps/
Removing lib/vtls/.dirstamp
Removing lib/vtls/libcurl_la-bearssl.lo
Removing lib/vtls/libcurl_la-bearssl.o
Removing lib/vtls/libcurl_la-gtls.lo
Removing lib/vtls/libcurl_la-gtls.o
Removing lib/vtls/libcurl_la-hostcheck.lo
Removing lib/vtls/libcurl_la-hostcheck.o
Removing lib/vtls/libcurl_la-keylog.lo
Removing lib/vtls/libcurl_la-keylog.o
Removing lib/vtls/libcurl_la-mbedtls.lo
Removing lib/vtls/libcurl_la-mbedtls.o
Removing lib/vtls/libcurl_la-mbedtls_threadlock.lo
Removing lib/vtls/libcurl_la-mbedtls_threadlock.o
Removing lib/vtls/libcurl_la-openssl.lo
Removing lib/vtls/libcurl_la-openssl.o
Removing lib/vtls/libcurl_la-rustls.lo
Removing lib/vtls/libcurl_la-rustls.o
Removing lib/vtls/libcurl_la-schannel.lo
Removing lib/vtls/libcurl_la-schannel.o
Removing lib/vtls/libcurl_la-schannel_verify.lo
Removing lib/vtls/libcurl_la-schannel_verify.o
Removing lib/vtls/libcurl_la-sectransp.lo
Removing lib/vtls/libcurl_la-sectransp.o
Removing lib/vtls/libcurl_la-vtls.lo
Removing lib/vtls/libcurl_la-vtls.o
Removing lib/vtls/libcurl_la-wolfssl.lo
Removing lib/vtls/libcurl_la-wolfssl.o
Removing lib/vtls/libcurl_la-x509asn1.lo
Removing lib/vtls/libcurl_la-x509asn1.o
Removing lib/warnless.o
Removing libcurl.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing packages/Makefile
Removing packages/Makefile.in
Removing packages/vms/Makefile
Removing packages/vms/Makefile.in
Removing scripts/Makefile
Removing scripts/Makefile.in
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/curl
Removing src/slist_wc.o
Removing src/tool_binmode.o
Removing src/tool_bname.o
Removing src/tool_cb_dbg.o
Removing src/tool_cb_hdr.o
Removing src/tool_cb_prg.o
Removing src/tool_cb_rea.o
Removing src/tool_cb_see.o
Removing src/tool_cb_wrt.o
Removing src/tool_cfgable.o
Removing src/tool_dirhie.o
Removing src/tool_doswin.o
Removing src/tool_easysrc.o
Removing src/tool_filetime.o
Removing src/tool_findfile.o
Removing src/tool_formparse.o
Removing src/tool_getparam.o
Removing src/tool_getpass.o
Removing src/tool_help.o
Removing src/tool_helpers.o
Removing src/tool_hugehelp.c
Removing src/tool_hugehelp.o
Removing src/tool_ipfs.o
Removing src/tool_libinfo.o
Removing src/tool_listhelp.o
Removing src/tool_main.o
Removing src/tool_msgs.o
Removing src/tool_operate.o
Removing src/tool_operhlp.o
Removing src/tool_paramhlp.o
Removing src/tool_parsecfg.o
Removing src/tool_progress.o
Removing src/tool_setopt.o
Removing src/tool_sleep.o
Removing src/tool_stderr.o
Removing src/tool_strdup.o
Removing src/tool_urlglob.o
Removing src/tool_util.o
Removing src/tool_vms.o
Removing src/tool_writeout.o
Removing src/tool_writeout_json.o
Removing src/tool_xattr.o
Removing src/var.o
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/certs/Makefile
Removing tests/certs/Makefile.in
Removing tests/certs/scripts/Makefile
Removing tests/certs/scripts/Makefile.in
Removing tests/config
Removing tests/configurehelp.pm
Removing tests/data/Makefile
Removing tests/data/Makefile.in
Removing tests/http/Makefile
Removing tests/http/Makefile.in
Removing tests/http/clients/.deps/
Removing tests/http/clients/Makefile
Removing tests/http/clients/Makefile.in
Removing tests/http/config.ini
Removing tests/libtest/.deps/
Removing tests/libtest/Makefile
Removing tests/libtest/Makefile.in
Removing tests/server/.deps/
Removing tests/server/Makefile
Removing tests/server/Makefile.in
Removing tests/unit/.deps/
Removing tests/unit/Makefile
Removing tests/unit/Makefile.in

$ autoreconf -fi
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Remember to add 'LT_INIT' to configure.ac.
configure.ac:123: installing './compile'
configure.ac:425: installing './config.guess'
configure.ac:425: installing './config.sub'
configure.ac:123: installing './install-sh'
configure.ac:129: installing './missing'
docs/examples/Makefile.am: installing './depcomp'

$ bash -c find . -name config.guess -exec cp /usr/share/misc/config.guess {} \;

$ bash -c find . -name config.sub -exec cp /usr/share/misc/config.sub {} \;

$ chmod +x configure

$ ./configure --disable-shared --without-ssl --disable-docs
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable ECH support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking for gcc... ccache gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether ccache gcc accepts -g... yes
checking for ccache gcc option to enable C11 features... none needed
checking whether ccache gcc understands -c and -o together... yes
checking how to run the C preprocessor... ccache gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of ccache gcc... gcc3
checking curl version... 8.7.0-DEV
checking for httpd... no
checking for apache2... no
checking for apachectl... no
checking for apxs... no
configure: httpd/apache2 not in PATH, http tests disabled
configure: apxs not in PATH, http tests disabled
checking for nghttpx... no
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defined... no
checking if _THREAD_SAFE is actually needed... no
checking if _THREAD_SAFE is onwards defined... no
checking if _REENTRANT is already defined... no
checking if _REENTRANT is actually needed... no
checking if _REENTRANT is onwards defined... no
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking how to print strings... printf
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for fgrep... /usr/bin/grep -F
checking for ld used by ccache gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from ccache gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking for dlfcn.h... yes
checking for objdir... .libs
checking if ccache gcc supports -fno-rtti -fno-exceptions... no
checking for ccache gcc option to produce PIC... -fPIC -DPIC
checking if ccache gcc PIC flag -fPIC -DPIC works... yes
checking if ccache gcc static flag -static works... yes
checking if ccache gcc supports -c -o file.o... yes
checking if ccache gcc supports -c -o file.o... (cached) yes
checking whether the ccache gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether to build shared libraries with -version-info... yes
checking whether to build shared libraries with -no-undefined... no
checking whether to build shared libraries with -mimpure-text... no
checking whether to build shared libraries with PIC... yes
checking whether to build static libraries with PIC... yes
checking whether to build shared libraries only... no
checking whether to build static libraries only... yes
checking for windres... no
checking for inline... inline
checking if cpp -P is needed... yes
checking if cpp -P works... yes
checking if compiler is DEC/Compaq/HP C... no
checking if compiler is HP-UX C... no
checking if compiler is IBM C... no
checking if compiler is Intel C... no
checking if compiler is clang... no
checking if compiler is GNU C... yes
checking compiler version... gcc '1100' (raw: '11')
checking if compiler is SGI MIPSpro C... no
checking if compiler is SGI MIPS C... no
checking if compiler is SunPro C... no
checking if compiler is Tiny C... no
checking whether build target is a native Windows one... no
checking if compiler accepts some basic options... yes
configure: compiler options added: -Werror-implicit-function-declaration
checking if compiler optimizer assumed setting might be used... yes
checking if compiler accepts optimizer enabling options... yes
configure: compiler options added: -O2
checking if compiler accepts strict warning options... yes
configure: compiler options added: -Wno-system-headers
checking if compiler halts on compilation errors... yes
checking if compiler halts on negative sized arrays... yes
checking if compiler halts on function prototype mismatch... yes
checking if compiler supports hiding library internal symbols... yes
checking whether build target supports WIN32 file API... no
checking whether build target supports WIN32 crypto API... no
checking for good-to-use Darwin CFLAGS... no
checking whether to link macOS CoreFoundation, CoreServices, and SystemConfiguration frameworks... no
checking to see if the compiler supports __builtin_available()... no
checking whether to support http... yes
checking whether to support ftp... yes
checking whether to support file... yes
checking whether to support ldap... yes
checking whether to support ldaps... yes
checking whether to support rtsp... yes
checking whether to support proxies... yes
checking whether to support dict... yes
checking whether to support telnet... yes
checking whether to support tftp... yes
checking whether to support pop3... yes
checking whether to support imap... yes
checking whether to support smb... yes
checking whether to support smtp... yes
checking whether to support gopher... yes
checking whether to support mqtt... no
checking whether to build documentation... no
checking whether to provide built-in manual... yes
checking whether to enable generation of C code... yes
checking whether to use libgcc... no
checking if X/Open network library is required... no
checking for gethostbyname... yes
checking whether build target is a native Windows one... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for raw monotonic clock_gettime... yes
checking for pkg-config... /usr/bin/pkg-config
checking for zlib options with pkg-config... found
checking for zlib.h... yes
configure: found both libz and libz.h header
checking for BrotliDecoderDecompress in -lbrotlidec... no
checking for brotli/decode.h... no
checking for ZSTD_createDStream in -lzstd... no
checking for zstd.h... no
checking for lber.h... no
checking for ldap.h... no
checking for ldap_ssl.h... no
checking for LDAP libraries... cannot find LDAP libraries
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... yes
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Secure Transport... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for psl_builtin in -lpsl... yes
checking for libpsl.h... yes
checking for library containing gsasl_init... no
checking for RTMP_Init in -lrtmp... no
checking whether versioned symbols are wanted... no
checking whether to enable Windows native IDN (Windows native builds only)... no
checking whether to build with libidn2... (assumed) yes
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libidn2 options with pkg-config... no
configure: IDN_LIBS: "-lidn2"
configure: IDN_LDFLAGS: ""
configure: IDN_CPPFLAGS: ""
configure: IDN_DIR: ""
checking if idn2_lookup_ul can be linked... no
checking for idn2.h... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libnghttp2 options with pkg-config... no
checking for nghttp2_session_get_stream_local_window_size in -lnghttp2... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for fish options with pkg-config... no
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for sys/select.h... yes
checking for sys/socket.h... yes
checking for sys/ioctl.h... yes
checking for unistd.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for arpa/inet.h... yes
checking for net/if.h... yes
checking for netinet/in.h... yes
checking for netinet/in6.h... no
checking for sys/un.h... yes
checking for linux/tcp.h... yes
checking for netinet/tcp.h... yes
checking for netinet/udp.h... yes
checking for netdb.h... yes
checking for sys/sockio.h... no
checking for sys/stat.h... (cached) yes
checking for sys/param.h... yes
checking for termios.h... yes
checking for termio.h... yes
checking for fcntl.h... yes
checking for io.h... no
checking for pwd.h... yes
checking for utime.h... yes
checking for sys/utime.h... no
checking for sys/poll.h... yes
checking for poll.h... yes
checking for socket.h... no
checking for sys/resource.h... yes
checking for libgen.h... yes
checking for locale.h... yes
checking for stdbool.h... yes
checking for sys/filio.h... no
checking for sys/wait.h... yes
checking for setjmp.h... yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for struct timeval... yes
checking run-time libs availability... fine
checking size of size_t... 8
checking size of long... 8
checking size of int... 4
checking size of time_t... 8
checking size of off_t... 8
checking size of curl_off_t... 8
checking size of curl_socket_t... 4
checking for long long... yes
checking for ssize_t... yes
checking for bool... yes
checking for sa_family_t... yes
checking for suseconds_t... yes
checking if time_t is unsigned... no
checking for in_addr_t... yes
checking for struct sockaddr_storage... yes
checking for sys/select.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for select... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for recv... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for send... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for MSG_NOSIGNAL... yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking if alarm can be linked... yes
checking if alarm is prototyped... yes
checking if alarm is compilable... yes
checking if alarm usage allowed... yes
checking if alarm might be used... yes
checking for sys/types.h... (cached) yes
checking for strings.h... (cached) yes
checking for sys/types.h... (cached) yes
checking for libgen.h... (cached) yes
checking if basename can be linked... yes
checking if basename is prototyped... yes
checking if basename is compilable... yes
checking if basename usage allowed... yes
checking if basename might be used... yes
checking for sys/types.h... (cached) yes
checking for socket.h... (cached) no
checking if closesocket can be linked... no
checking if closesocket might be used... no
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking if CloseSocket can be linked... no
checking if CloseSocket might be used... no
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking for fcntl.h... (cached) yes
checking if fcntl can be linked... yes
checking if fcntl is prototyped... yes
checking if fcntl is compilable... yes
checking if fcntl usage allowed... yes
checking if fcntl might be used... yes
checking if fcntl O_NONBLOCK is compilable... yes
checking if fcntl O_NONBLOCK usage allowed... yes
checking if fcntl O_NONBLOCK might be used... yes
checking whether build target is a native Windows one... (cached) no
checking for sys/types.h... (cached) yes
checking for netdb.h... (cached) yes
checking if freeaddrinfo can be linked... yes
checking if freeaddrinfo is prototyped... yes
checking if freeaddrinfo is compilable... yes
checking if freeaddrinfo usage allowed... yes
checking if freeaddrinfo might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/xattr.h... yes
checking if fsetxattr can be linked... yes
checking if fsetxattr is prototyped... yes
checking if fsetxattr takes 5 args.... yes
checking if fsetxattr is compilable... yes
checking if fsetxattr usage allowed... yes
checking if fsetxattr might be used... yes
checking if ftruncate can be linked... yes
checking if ftruncate is prototyped... yes
checking if ftruncate is compilable... yes
checking if ftruncate usage allowed... yes
checking if ftruncate might be used... yes
checking for sys/types.h... (cached) yes
checking if getaddrinfo can be linked... yes
checking if getaddrinfo is prototyped... yes
checking if getaddrinfo is compilable... yes
checking if getaddrinfo seems to work... yes
checking if getaddrinfo usage allowed... yes
checking if getaddrinfo might be used... yes
checking if getaddrinfo is threadsafe... yes
checking if gethostbyname can be linked... yes
checking if gethostbyname is prototyped... yes
checking if gethostbyname is compilable... yes
checking if gethostbyname usage allowed... yes
checking if gethostbyname might be used... yes
checking if gethostbyname_r can be linked... yes
checking if gethostbyname_r is prototyped... yes
checking if gethostbyname_r takes 3 args.... no
checking if gethostbyname_r takes 5 args.... no
checking if gethostbyname_r takes 6 args.... yes
checking if gethostbyname_r is compilable... yes
checking if gethostbyname_r usage allowed... yes
checking if gethostbyname_r might be used... yes
checking if gethostname can be linked... yes
checking if gethostname is prototyped... yes
checking if gethostname is compilable... yes
checking for gethostname arg 2 data type... size_t
checking if gethostname usage allowed... yes
checking if gethostname might be used... yes
checking if getpeername can be linked... yes
checking if getpeername is prototyped... yes
checking if getpeername is compilable... yes
checking if getpeername usage allowed... yes
checking if getpeername might be used... yes
checking if getsockname can be linked... yes
checking if getsockname is prototyped... yes
checking if getsockname is compilable... yes
checking if getsockname usage allowed... yes
checking if getsockname might be used... yes
checking for net/if.h... (cached) yes
checking if if_nametoindex can be linked... yes
checking if if_nametoindex is prototyped... yes
checking if if_nametoindex is compilable... yes
checking if if_nametoindex usage allowed... yes
checking if if_nametoindex might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for netinet/in.h... (cached) yes
checking for ifaddrs.h... yes
checking if getifaddrs can be linked... yes
checking if getifaddrs is prototyped... yes
checking if getifaddrs is compilable... yes
checking if getifaddrs seems to work... yes
checking if getifaddrs usage allowed... yes
checking if getifaddrs might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking if gmtime_r can be linked... yes
checking if gmtime_r is prototyped... yes
checking if gmtime_r is compilable... yes
checking if gmtime_r seems to work... yes
checking if gmtime_r usage allowed... yes
checking if gmtime_r might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for netinet/in.h... (cached) yes
checking for arpa/inet.h... (cached) yes
checking if inet_ntop can be linked... yes
checking if inet_ntop is prototyped... yes
checking if inet_ntop is compilable... yes
checking if inet_ntop seems to work... yes
checking if inet_ntop usage allowed... yes
checking if inet_ntop might be used... yes
checking if inet_pton can be linked... yes
checking if inet_pton is prototyped... yes
checking if inet_pton is compilable... yes
checking if inet_pton seems to work... yes
checking if inet_pton usage allowed... yes
checking if inet_pton might be used... yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for sys/ioctl.h... (cached) yes
checking for stropts.h... no
checking if ioctl can be linked... yes
checking if ioctl is prototyped... yes
checking if ioctl is compilable... yes
checking if ioctl usage allowed... yes
checking if ioctl might be used... yes
checking if ioctl FIONBIO is compilable... yes
checking if ioctl FIONBIO usage allowed... yes
checking if ioctl FIONBIO might be used... yes
checking if ioctl SIOCGIFADDR is compilable... yes
checking if ioctl SIOCGIFADDR usage allowed... yes
checking if ioctl SIOCGIFADDR might be used... yes
checking if ioctlsocket can be linked... no
checking if ioctlsocket might be used... no
checking if IoctlSocket can be linked... no
checking if IoctlSocket might be used... no
checking if memrchr can be linked... yes
checking if memrchr is prototyped... no
checking if memrchr might be used... no
checking for sys/types.h... (cached) yes
checking for poll.h... (cached) yes
checking for sys/poll.h... (cached) yes
checking if poll can be linked... yes
checking if poll is prototyped... yes
checking if poll is compilable... yes
checking if poll seems to work... yes
checking if poll usage allowed... yes
checking if poll might be used... yes
checking for sys/types.h... (cached) yes
checking if sigaction can be linked... yes
checking if sigaction is prototyped... yes
checking if sigaction is compilable... yes
checking if sigaction usage allowed... yes
checking if sigaction might be used... yes
checking if siginterrupt can be linked... yes
checking if siginterrupt is prototyped... yes
checking if siginterrupt is compilable... yes
checking if siginterrupt usage allowed... yes
checking if siginterrupt might be used... yes
checking if signal can be linked... yes
checking if signal is prototyped... yes
checking if signal is compilable... yes
checking if signal usage allowed... yes
checking if signal might be used... yes
checking for sys/types.h... (cached) yes
checking if sigsetjmp can be linked... no
checking if sigsetjmp seems a macro... yes
checking if sigsetjmp is compilable... yes
checking if sigsetjmp usage allowed... yes
checking if sigsetjmp might be used... yes
checking if socket can be linked... yes
checking if socket is prototyped... yes
checking if socket is compilable... yes
checking if socket usage allowed... yes
checking if socket might be used... yes
checking if socketpair can be linked... yes
checking if socketpair is prototyped... yes
checking if socketpair is compilable... yes
checking if socketpair usage allowed... yes
checking if socketpair might be used... yes
checking if strcasecmp can be linked... yes
checking if strcasecmp is prototyped... yes
checking if strcasecmp is compilable... yes
checking if strcasecmp usage allowed... yes
checking if strcasecmp might be used... yes
checking if strcmpi can be linked... no
checking if strcmpi might be used... no
checking if strdup can be linked... yes
checking if strdup is prototyped... yes
checking if strdup is compilable... yes
checking if strdup usage allowed... yes
checking if strdup might be used... yes
checking if strerror_r can be linked... yes
checking if strerror_r is prototyped... yes
checking if strerror_r is compilable... yes
checking if strerror_r is glibc like... no
checking if strerror_r is POSIX like... yes
checking if strerror_r seems to work... yes
checking if strerror_r usage allowed... yes
checking if strerror_r might be used... yes
checking if stricmp can be linked... no
checking if stricmp might be used... no
checking if strtok_r can be linked... yes
checking if strtok_r is prototyped... yes
checking if strtok_r is compilable... yes
checking if strtok_r usage allowed... yes
checking if strtok_r might be used... yes
checking if strtoll can be linked... yes
checking if strtoll is prototyped... yes
checking if strtoll is compilable... yes
checking if strtoll usage allowed... yes
checking if strtoll might be used... yes
checking for ccache gcc options needed to detect all undeclared functions... none needed
checking whether getpwuid_r is declared... yes
checking for _fseeki64... no
checking deeper for _fseeki64... but still no
checking for arc4random... no
checking deeper for arc4random... but still no
checking for fnmatch... yes
checking for fseeko... yes
checking for geteuid... yes
checking for getpass_r... no
checking deeper for getpass_r... but still no
checking for getppid... yes
checking for getpwuid... yes
checking for getpwuid_r... yes
checking for getrlimit... yes
checking for gettimeofday... yes
checking for if_nametoindex... yes
checking for mach_absolute_time... no
checking deeper for mach_absolute_time... but still no
checking for pipe... yes
checking for sched_yield... yes
checking for sendmsg... yes
checking for setlocale... yes
checking for setmode... no
checking deeper for setmode... but still no
checking for setrlimit... yes
checking for snprintf... yes
checking for utime... yes
checking for utimes... yes
checking whether fseeko is declared... yes
checking how to set a socket into non-blocking mode... fcntl O_NONBLOCK
checking for perl... /usr/bin/perl
checking for gnroff... no
checking for nroff... /usr/bin/nroff
checking how to use *nroff to get plain text from man pages... -man
checking whether to enable the threaded resolver... yes
checking whether to use POSIX threads for threaded resolver... auto
checking for pthread.h... yes
checking for pthread_create... yes
checking convert -I options to -isystem... yes
checking whether to enable verbose strings... yes
checking whether to enable SSPI support (Windows native builds only)... no
checking whether to enable basic authentication method... yes
checking whether to enable bearer authentication method... yes
checking whether to enable digest authentication method... yes
checking whether to enable kerberos authentication method... yes
checking whether to enable negotiate authentication method... yes
checking whether to enable aws sig methods... yes
checking whether to support NTLM... yes
checking whether to enable NTLM delegation to winbind's helper... no
checking whether to enable TLS-SRP authentication... yes
checking whether to enable Unix domain sockets... auto
checking for struct sockaddr_un.sun_path... yes
checking whether to support cookies... yes
checking whether to support socketpair... yes
checking whether to support HTTP authentication... yes
checking whether to support DoH... yes
checking whether to support the MIME API... yes
checking whether to support binding connections locally... yes
checking whether to support the form API... yes
checking whether to support date parsing... yes
checking whether to support netrc parsing... yes
checking whether to support progress-meter... yes
checking whether to support DNS shuffling... yes
checking whether to support curl_easy_option*... yes
checking whether to support alt-svc... yes
checking whether to support headers-api... yes
configure: disables HSTS due to lack of SSL
checking whether to support WebSockets... no
checking whether hiding of library internal symbols will actually happen... yes
checking if this build supports HTTPS-proxy... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating docs/Makefile
config.status: creating docs/examples/Makefile
config.status: creating docs/libcurl/Makefile
config.status: creating docs/libcurl/opts/Makefile
config.status: creating docs/cmdline-opts/Makefile
config.status: creating include/Makefile
config.status: creating include/curl/Makefile
config.status: creating src/Makefile
config.status: creating lib/Makefile
config.status: creating scripts/Makefile
config.status: creating lib/libcurl.vers
config.status: creating lib/libcurl.plist
config.status: creating tests/Makefile
config.status: creating tests/config
config.status: creating tests/certs/Makefile
config.status: creating tests/certs/scripts/Makefile
config.status: creating tests/data/Makefile
config.status: creating tests/server/Makefile
config.status: creating tests/libtest/Makefile
config.status: creating tests/unit/Makefile
config.status: creating tests/http/config.ini
config.status: creating tests/http/Makefile
config.status: creating tests/http/clients/Makefile
config.status: creating packages/Makefile
config.status: creating packages/vms/Makefile
config.status: creating curl-config
config.status: creating libcurl.pc
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: Configured to build curl/libcurl:

Host setup: x86_64-pc-linux-gnu
Install prefix: /usr/local
Compiler: ccache gcc
CFLAGS: -Werror-implicit-function-declaration -O2 -Wno-system-headers
CPPFLAGS:
LDFLAGS:
LIBS: -lpsl -lz

curl version: 8.7.0-DEV
SSL: no (--with-{openssl,gnutls,mbedtls,wolfssl,schannel,secure-transport,amissl,bearssl,rustls} )
SSH: no (--with-{libssh,libssh2})
zlib: enabled
brotli: no (--with-brotli)
zstd: no (--with-zstd)
GSS-API: no (--with-gssapi)
GSASL: no (libgsasl not found)
TLS-SRP: no (--enable-tls-srp)
resolver: POSIX threaded
IPv6: enabled
Unix sockets: enabled
IDN: no (--with-{libidn2,winidn})
Build docs: no
Build libcurl: Shared=no, Static=yes
Built-in manual: enabled
--libcurl option: enabled (--disable-libcurl-option)
Verbose errors: enabled (--disable-verbose)
Code coverage: disabled
SSPI: no (--enable-sspi)
ca cert bundle: no
ca cert path:
ca fallback:
LDAP: no (--enable-ldap / --with-ldap-lib / --with-lber-lib)
LDAPS: no (--enable-ldaps)
RTSP: enabled
RTMP: no (--with-librtmp)
PSL: enabled
Alt-svc: enabled (--disable-alt-svc)
Headers API: enabled (--disable-headers-api)
HSTS: no (--enable-hsts)
HTTP1: enabled (internal)
HTTP2: no (--with-nghttp2)
HTTP3: no (--with-ngtcp2 --with-nghttp3, --with-quiche, --with-openssl-quic, --with-msh3)
ECH: no (--enable-ech)
WebSockets: no (--enable-websockets)
Protocols: DICT FILE FTP GOPHER HTTP IMAP IPFS IPNS MQTT POP3 RTSP SMTP TELNET TFTP
Features: AsynchDNS IPv6 Largefile PSL UnixSockets alt-svc libz threadsafe

configure: WARNING: Cannot find libraries for LDAP support: LDAP disabled
configure: WARNING: libgsasl was not found
configure: WARNING: Cannot find libraries for IDN support: IDN disabled

$ make -j3
Making all in lib
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
make all-am
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
CC libcurl_la-altsvc.lo
CC libcurl_la-amigaos.lo
CC libcurl_la-asyn-ares.lo
CC libcurl_la-asyn-thread.lo
CC libcurl_la-base64.lo
CC libcurl_la-bufq.lo
CC libcurl_la-bufref.lo
CC libcurl_la-c-hyper.lo
CC libcurl_la-cf-h1-proxy.lo
CC libcurl_la-cf-h2-proxy.lo
CC libcurl_la-cf-haproxy.lo
CC libcurl_la-cf-https-connect.lo
CC libcurl_la-cf-socket.lo
CC libcurl_la-cfilters.lo
CC libcurl_la-conncache.lo
CC libcurl_la-connect.lo
CC libcurl_la-content_encoding.lo
CC libcurl_la-cookie.lo
CC libcurl_la-curl_addrinfo.lo
CC libcurl_la-curl_des.lo
CC libcurl_la-curl_endian.lo
CC libcurl_la-curl_get_line.lo
CC libcurl_la-curl_fnmatch.lo
CC libcurl_la-curl_gethostname.lo
CC libcurl_la-curl_gssapi.lo
CC libcurl_la-curl_memrchr.lo
CC libcurl_la-curl_multibyte.lo
CC libcurl_la-curl_ntlm_core.lo
CC libcurl_la-curl_ntlm_wb.lo
CC libcurl_la-curl_path.lo
CC libcurl_la-curl_range.lo
CC libcurl_la-curl_rtmp.lo
CC libcurl_la-curl_sasl.lo
CC libcurl_la-curl_sha512_256.lo
CC libcurl_la-curl_sspi.lo
CC libcurl_la-curl_threads.lo
CC libcurl_la-curl_trc.lo
CC libcurl_la-cw-out.lo
CC libcurl_la-dict.lo
CC libcurl_la-doh.lo
CC libcurl_la-dynbuf.lo
CC libcurl_la-dynhds.lo
CC libcurl_la-easy.lo
CC libcurl_la-easygetopt.lo
CC libcurl_la-easyoptions.lo
CC libcurl_la-escape.lo
CC libcurl_la-file.lo
CC libcurl_la-fileinfo.lo
CC libcurl_la-fopen.lo
CC libcurl_la-formdata.lo
CC libcurl_la-ftp.lo
CC libcurl_la-ftplistparser.lo
CC libcurl_la-getenv.lo
CC libcurl_la-getinfo.lo
CC libcurl_la-gopher.lo
CC libcurl_la-hash.lo
CC libcurl_la-headers.lo
CC libcurl_la-hmac.lo
CC libcurl_la-hostasyn.lo
CC libcurl_la-hostip.lo
CC libcurl_la-hostip4.lo
CC libcurl_la-hostip6.lo
CC libcurl_la-hostsyn.lo
CC libcurl_la-hsts.lo
CC libcurl_la-http.lo
CC libcurl_la-http1.lo
CC libcurl_la-http2.lo
CC libcurl_la-http_aws_sigv4.lo
CC libcurl_la-http_chunks.lo
CC libcurl_la-http_digest.lo
CC libcurl_la-http_negotiate.lo
CC libcurl_la-http_ntlm.lo
CC libcurl_la-http_proxy.lo
CC libcurl_la-idn.lo
CC libcurl_la-if2ip.lo
CC libcurl_la-imap.lo
CC libcurl_la-inet_ntop.lo
CC libcurl_la-inet_pton.lo
CC libcurl_la-krb5.lo
CC libcurl_la-ldap.lo
CC libcurl_la-llist.lo
CC libcurl_la-macos.lo
CC libcurl_la-md4.lo
CC libcurl_la-md5.lo
CC libcurl_la-mime.lo
CC libcurl_la-memdebug.lo
CC libcurl_la-mprintf.lo
CC libcurl_la-mqtt.lo
CC libcurl_la-multi.lo
CC libcurl_la-netrc.lo
CC libcurl_la-nonblock.lo
CC libcurl_la-noproxy.lo
CC libcurl_la-openldap.lo
CC libcurl_la-parsedate.lo
CC libcurl_la-pingpong.lo
CC libcurl_la-pop3.lo
CC libcurl_la-progress.lo
CC libcurl_la-psl.lo
CC libcurl_la-rand.lo
CC libcurl_la-rename.lo
CC libcurl_la-request.lo
CC libcurl_la-rtsp.lo
CC libcurl_la-select.lo
CC libcurl_la-sendf.lo
CC libcurl_la-setopt.lo
CC libcurl_la-sha256.lo
CC libcurl_la-share.lo
CC libcurl_la-smb.lo
CC libcurl_la-slist.lo
CC libcurl_la-smtp.lo
CC libcurl_la-socketpair.lo
CC libcurl_la-socks.lo
CC libcurl_la-socks_gssapi.lo
CC libcurl_la-socks_sspi.lo
CC libcurl_la-speedcheck.lo
CC libcurl_la-splay.lo
CC libcurl_la-strcase.lo
CC libcurl_la-strdup.lo
CC libcurl_la-strerror.lo
CC libcurl_la-strtok.lo
CC libcurl_la-strtoofft.lo
CC libcurl_la-system_win32.lo
CC libcurl_la-telnet.lo
CC libcurl_la-tftp.lo
CC libcurl_la-timediff.lo
CC libcurl_la-timeval.lo
CC libcurl_la-transfer.lo
CC libcurl_la-url.lo
CC libcurl_la-urlapi.lo
CC libcurl_la-version.lo
CC libcurl_la-version_win32.lo
CC libcurl_la-warnless.lo
CC libcurl_la-ws.lo
CC vauth/libcurl_la-cleartext.lo
CC vauth/libcurl_la-cram.lo
CC vauth/libcurl_la-digest.lo
CC vauth/libcurl_la-digest_sspi.lo
CC vauth/libcurl_la-krb5_gssapi.lo
CC vauth/libcurl_la-gsasl.lo
CC vauth/libcurl_la-krb5_sspi.lo
CC vauth/libcurl_la-ntlm.lo
CC vauth/libcurl_la-ntlm_sspi.lo
CC vauth/libcurl_la-oauth2.lo
CC vauth/libcurl_la-spnego_gssapi.lo
CC vauth/libcurl_la-spnego_sspi.lo
CC vauth/libcurl_la-vauth.lo
CC vtls/libcurl_la-bearssl.lo
CC vtls/libcurl_la-gtls.lo
CC vtls/libcurl_la-hostcheck.lo
CC vtls/libcurl_la-keylog.lo
CC vtls/libcurl_la-mbedtls.lo
CC vtls/libcurl_la-mbedtls_threadlock.lo
CC vtls/libcurl_la-openssl.lo
CC vtls/libcurl_la-rustls.lo
CC vtls/libcurl_la-schannel.lo
CC vtls/libcurl_la-schannel_verify.lo
CC vtls/libcurl_la-sectransp.lo
CC vtls/libcurl_la-vtls.lo
CC vtls/libcurl_la-wolfssl.lo
CC vtls/libcurl_la-x509asn1.lo
CC vquic/libcurl_la-curl_msh3.lo
CC vquic/libcurl_la-curl_ngtcp2.lo
CC vquic/libcurl_la-curl_osslq.lo
CC vquic/libcurl_la-curl_quiche.lo
CC vquic/libcurl_la-vquic.lo
CC vquic/libcurl_la-vquic-tls.lo
CC vssh/libcurl_la-libssh.lo
CC vssh/libcurl_la-libssh2.lo
CC vssh/libcurl_la-wolfssh.lo
CCLD libcurl.la
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
Making all in src
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/src'
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/src'
CC slist_wc.o
CC tool_bname.o
CC tool_binmode.o
CC tool_cb_dbg.o
CC tool_cb_prg.o
CC tool_cb_hdr.o
CC tool_cb_rea.o
CC tool_cb_see.o
CC tool_cb_wrt.o
CC tool_cfgable.o
CC tool_dirhie.o
CC tool_doswin.o
CC tool_easysrc.o
CC tool_filetime.o
CC tool_findfile.o
CC tool_formparse.o
CC tool_getparam.o
CC tool_getpass.o
CC tool_help.o
CC tool_helpers.o
cd ../docs && make
make[3]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
CC tool_ipfs.o
CC tool_libinfo.o
Making all in .
make[4]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
if test "..x" != "..x" -a -e "./curl.1"; then \
/usr/bin/install -c -m 644 "./curl.1" /root/asi_db/builds/curl/_worktrees/w0/docs/curl.1 \
&& touch -r "./curl.1" /root/asi_db/builds/curl/_worktrees/w0/docs/curl.1; fi
CC tool_listhelp.o
cd cmdline-opts && make
CC tool_main.o
make[5]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
GENERATE ../../docs/curl.1
CC tool_msgs.o
CC tool_operate.o
RENDER curl-config.1
CC tool_operhlp.o
CC tool_paramhlp.o
CC tool_parsecfg.o
CC tool_progress.o
CC tool_setopt.o
CC tool_sleep.o
CC tool_stderr.o
CC tool_strdup.o
CC tool_urlglob.o
CC tool_util.o
CC tool_vms.o
CC tool_writeout.o
CC tool_writeout_json.o
CC tool_xattr.o
CC var.o
CC ../lib/base64.o
CC ../lib/curl_multibyte.o
CC ../lib/dynbuf.o
CC ../lib/nonblock.o
CC ../lib/strtoofft.o
CC ../lib/timediff.o
CC ../lib/version_win32.o
CC ../lib/warnless.o
make[5]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
make[4]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
Making all in cmdline-opts
make[4]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
Making all in libcurl
make[4]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs/libcurl'
Making all in opts
make[5]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs/libcurl/opts'
make[5]: Nothing to be done for 'all'.
make[5]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs/libcurl/opts'
make[5]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs/libcurl'
make[5]: Nothing to be done for 'all-am'.
make[5]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs/libcurl'
make[4]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs/libcurl'
make[3]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
HUGE tool_hugehelp.c
CC tool_hugehelp.o
CCLD curl
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/src'
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/src'
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0'
form.md:32:1:WARN: un-escaped < or > used

Commit Diff GitHub →

docs/examples/address-scope.c+1 -1

@@ -47,7 +47,7 @@ int main(void)
	my_scope_id = if_nametoindex("eth0");
	curl_easy_setopt(curl, CURLOPT_ADDRESS_SCOPE, my_scope_id);

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/altsvc.c+1 -1

@@ -44,7 +44,7 @@ int main(void)
	curl_easy_setopt(curl, CURLOPT_ALTSVC_CTRL, (long)
	CURLALTSVC_H1\|CURLALTSVC_H2\|CURLALTSVC_H3);

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/anyauthput.c+1 -1

@@ -100,7 +100,7 @@ int main(int argc, char **argv)
	fp = fopen(file, "rb");
	fstat(FILENO(fp), &file_info);

-	/* In windows, this will init the winsock stuff */
+	/* In windows, this inits the winsock stuff */
	curl_global_init(CURL_GLOBAL_ALL);

	/* get a curl handle */

docs/examples/cacertinmem.c+10 -11

@@ -139,7 +139,7 @@ int main(void)
	curl_easy_setopt(ch, CURLOPT_SSL_VERIFYPEER, 1L);
	curl_easy_setopt(ch, CURLOPT_URL, "https://www.example.com/");

-	/* Turn off the default CA locations, otherwise libcurl will load CA
+	/* Turn off the default CA locations, otherwise libcurl loads CA
	* certificates from the locations that were detected/specified at
	* build-time
	*/
@@ -155,19 +155,18 @@ int main(void)
	else
	printf("* transfer failed *\n");

-	/* use a fresh connection (optional)
-	* this option seriously impacts performance of multiple transfers but
-	* it is necessary order to demonstrate this example. recall that the
-	* ssl ctx callback is only called _before_ an SSL connection is
-	* established, therefore it will not affect existing verified SSL
-	* connections already in the connection cache associated with this
-	* handle. normally you would set the ssl ctx function before making
-	* any transfers, and not use this option.
+	/* use a fresh connection (optional) this option seriously impacts
+	* performance of multiple transfers but it is necessary order to
+	* demonstrate this example. recall that the ssl ctx callback is only called
+	* _before_ an SSL connection is established, therefore it does not affect
+	* existing verified SSL connections already in the connection cache
+	* associated with this handle. normally you would set the ssl ctx function
+	* before making any transfers, and not use this option.
	*/
	curl_easy_setopt(ch, CURLOPT_FRESH_CONNECT, 1L);

-	/* second try: retrieve page using cacerts' certificate -> will succeed
-	* load the certificate by installing a function doing the necessary
+	/* second try: retrieve page using cacerts' certificate -> succeeds to load
+	* the certificate by installing a function doing the necessary
	* "modifications" to the SSL CONTEXT just before link init
	*/
	curl_easy_setopt(ch, CURLOPT_SSL_CTX_FUNCTION, sslctx_function);

docs/examples/connect-to.c+6 -6

@@ -22,7 +22,7 @@
	*
	***************************************************************************/
	/* <DESC>
-	* Use CURLOPT_CONNECT_TO to connect to "wrong" host name
+	* Use CURLOPT_CONNECT_TO to connect to "wrong" hostname
	* </DESC>
	*/
	#include <stdio.h>
@@ -39,8 +39,8 @@ int main(void)
	request, PORT is the port of the request, CONNECT-TO-HOST is the host name
	to connect to, and CONNECT-TO-PORT is the port to connect to.
	*/
-	/* instead of curl.se:443, it will resolve and use example.com:443 but in
-	other aspects work as if it still is curl.se */
+	/* instead of curl.se:443, it resolves and uses example.com:443 but in other
+	aspects work as if it still is curl.se */
	struct curl_slist *host = curl_slist_append(NULL,
	"curl.se:443:example.com:443");

@@ -51,13 +51,13 @@ int main(void)
	curl_easy_setopt(curl, CURLOPT_URL, "https://curl.se/");

	/* since this connects to the wrong host, checking the host name in the
-	server certificate will fail, so unless we disable the check libcurl
+	server certificate fails, so unless we disable the check libcurl
	returns CURLE_PEER_FAILED_VERIFICATION */
	curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0L);

	/* Letting the wrong host name in the certificate be okay, the transfer
-	goes through but will (most likely) cause a 404 or similar because it
-	sends an unknown name in the Host: header field */
+	goes through but (most likely) causes a 404 or similar because it sends
+	an unknown name in the Host: header field */
	res = curl_easy_perform(curl);

	/* always cleanup */

docs/examples/cookie_interface.c+3 -4

@@ -107,10 +107,9 @@ main(void)
	}

	/* HTTP-header style cookie. If you use the Set-Cookie format and do not
-	specify a domain then the cookie is sent for any domain and will not be
-	modified, likely not what you intended. Starting in 7.43.0 any-domain
-	cookies will not be exported either. For more information refer to the
-	CURLOPT_COOKIELIST documentation.
+	specify a domain then the cookie is sent for any domain and is not
+	modified, likely not what you intended. For more information refer to
+	the CURLOPT_COOKIELIST documentation.
	*/
	snprintf(nline, sizeof(nline),
	"Set-Cookie: OLD_PREF=3d141414bf4209321; "

docs/examples/default-scheme.c+1 -1

@@ -43,7 +43,7 @@ int main(void)

	curl_easy_setopt(curl, CURLOPT_VERBOSE, 1L);

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/ephiperfifo.c+7 -7

@@ -138,8 +138,8 @@ static void mcode_or_die(const char *where, CURLMcode code)

	static void timer_cb(GlobalInfo* g, int revents);

-	/* Update the timer after curl_multi library does it's thing. Curl will
-	* inform us through this callback what it wants the new timeout to be,
+	/* Update the timer after curl_multi library does its thing. Curl informs the
+	* application through this callback what it wants the new timeout to be,
	* after it does some work. */
	static int multi_timer_cb(CURLM multi, long timeout_ms, GlobalInfo g)
	{
@@ -228,9 +228,9 @@ static void timer_cb(GlobalInfo* g, int revents)
	if(err == -1) {
	/* Note that we may call the timer callback even if the timerfd is not
	* readable. It's possible that there are multiple events stored in the
-	* epoll buffer (i.e. the timer may have fired multiple times). The
-	* event count is cleared after the first call so future events in the
-	* epoll buffer will fail to read from the timer. */
+	* epoll buffer (i.e. the timer may have fired multiple times). The event
+	* count is cleared after the first call so future events in the epoll
+	* buffer fails to read from the timer. */
	if(errno == EAGAIN) {
	fprintf(MSG_OUT, "EAGAIN on tfd %d\n", g->tfd);
	return;
@@ -386,8 +386,8 @@ static void new_conn(char url, GlobalInfo g)
	rc = curl_multi_add_handle(g->multi, conn->easy);
	mcode_or_die("new_conn: curl_multi_add_handle", rc);

-	/* note that the add_handle() will set a time-out to trigger soon so that
-	the necessary socket_action() call will be called by this app */
+	/* note that the add_handle() sets a timeout to trigger soon so that the
+	* necessary socket_action() call gets called by this app */
	}

	/* This gets called whenever data is received from the fifo */

docs/examples/evhiperfifo.c+2 -2

@@ -364,8 +364,8 @@ static void new_conn(char url, GlobalInfo g)
	rc = curl_multi_add_handle(g->multi, conn->easy);
	mcode_or_die("new_conn: curl_multi_add_handle", rc);

-	/* note that the add_handle() will set a time-out to trigger soon so that
-	the necessary socket_action() call will be called by this app */
+	/* note that add_handle() sets a timeout to trigger soon so that the
+	necessary socket_action() gets called */
	}

	/* This gets called whenever data is received from the fifo */

docs/examples/externalsocket.c+2 -2

@@ -106,8 +106,8 @@ int main(void)
	curl = curl_easy_init();
	if(curl) {
	/*
-	* Note that libcurl will internally think that you connect to the host
-	* and port that you specify in the URL option.
+	* Note that libcurl internally thinks that you connect to the host and
+	* port that you specify in the URL option.
	*/
	curl_easy_setopt(curl, CURLOPT_URL, "http://99.99.99.99:9999");

docs/examples/ftp-wildcard.c+1 -1

@@ -70,7 +70,7 @@ int main(int argc, char **argv)
	/* callback is called after data from the file have been transferred */
	curl_easy_setopt(handle, CURLOPT_CHUNK_END_FUNCTION, file_is_downloaded);

-	/* this callback will write contents into files */
+	/* this callback writes contents into files */
	curl_easy_setopt(handle, CURLOPT_WRITEFUNCTION, write_it);

	/* put transfer data into callbacks */

docs/examples/ftpgetresp.c+2 -2

@@ -47,10 +47,10 @@ int main(void)
	FILE *ftpfile;
	FILE *respfile;

-	/* local file name to store the file as */
+	/* local filename to store the file as */
	ftpfile = fopen(FTPBODY, "wb"); /* b is binary, needed on win32 */

-	/* local file name to store the FTP server's response lines in */
+	/* local filename to store the FTP server's response lines in */
	respfile = fopen(FTPHEADERS, "wb"); /* b is binary, needed on win32 */

	curl = curl_easy_init();

docs/examples/ftpupload.c+5 -5

@@ -46,10 +46,10 @@
	#define REMOTE_URL "ftp://example.com/" UPLOAD_FILE_AS
	#define RENAME_FILE_TO "renamed-and-fine.txt"

-	/* NOTE: if you want this example to work on Windows with libcurl as a
-	DLL, you MUST also provide a read callback with CURLOPT_READFUNCTION.
-	Failing to do so will give you a crash since a DLL may not use the
-	variable's memory when passed in to it from an app like this. */
+	/* NOTE: if you want this example to work on Windows with libcurl as a DLL,
+	you MUST also provide a read callback with CURLOPT_READFUNCTION. Failing to
+	do so might give you a crash since a DLL may not use the variable's memory
+	when passed in to it from an app like this. */
	static size_t read_callback(char ptr, size_t size, size_t nmemb, void stream)
	{
	unsigned long nread;
@@ -90,7 +90,7 @@ int main(void)
	/* get a FILE * of the same file */
	hd_src = fopen(LOCAL_FILE, "rb");

-	/* In windows, this will init the winsock stuff */
+	/* In windows, this inits the winsock stuff */
	curl_global_init(CURL_GLOBAL_ALL);

	/* get a curl handle */

docs/examples/ftpuploadfrommem.c+2 -2

@@ -76,7 +76,7 @@ int main(void)
	upload.readptr = data;
	upload.sizeleft = strlen(data);

-	/* In windows, this will init the winsock stuff */
+	/* In windows, this inits the winsock stuff */
	res = curl_global_init(CURL_GLOBAL_DEFAULT);
	/* Check for errors */
	if(res != CURLE_OK) {
@@ -111,7 +111,7 @@ int main(void)
	curl_easy_setopt(curl, CURLOPT_INFILESIZE_LARGE,
	(curl_off_t)upload.sizeleft);

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/ftpuploadresume.c+4 -6

@@ -112,12 +112,10 @@ static int upload(CURL curlhandle, const char remotepath,
	/* determine the length of the file already written */

	/*
-	* With NOBODY and NOHEADER, libcurl will issue a SIZE
-	* command, but the only way to retrieve the result is
-	* to parse the returned Content-Length header. Thus,
-	* getcontentlengthfunc(). We need discardfunc() above
-	* because HEADER will dump the headers to stdout
-	* without it.
+	* With NOBODY and NOHEADER, libcurl issues a SIZE command, but the only
+	* way to retrieve the result is to parse the returned Content-Length
+	* header. Thus, getcontentlengthfunc(). We need discardfunc() above
+	* because HEADER dumps the headers to stdout without it.
	*/
	curl_easy_setopt(curlhandle, CURLOPT_NOBODY, 1L);
	curl_easy_setopt(curlhandle, CURLOPT_HEADER, 1L);

docs/examples/getinmemory.c+1 -1

@@ -66,7 +66,7 @@ int main(void)

	struct MemoryStruct chunk;

-	chunk.memory = malloc(1); /* will be grown as needed by the realloc above */
+	chunk.memory = malloc(1); /* grown as needed by the realloc above */
	chunk.size = 0; /* no data at this point */

	curl_global_init(CURL_GLOBAL_ALL);

docs/examples/getredirect.c+1 -1

@@ -41,7 +41,7 @@ int main(void)

	/* example.com is redirected, figure out the redirection! */

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/getreferrer.c+1 -1

@@ -39,7 +39,7 @@ int main(void)
	curl_easy_setopt(curl, CURLOPT_URL, "https://example.com");
	curl_easy_setopt(curl, CURLOPT_REFERER, "https://example.org/referrer");

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/ghiper.c+2 -2

@@ -323,8 +323,8 @@ static void new_conn(char url, GlobalInfo g)
	rc = curl_multi_add_handle(g->multi, conn->easy);
	mcode_or_die("new_conn: curl_multi_add_handle", rc);

-	/* note that the add_handle() will set a time-out to trigger soon so that
-	the necessary socket_action() call will be called by this app */
+	/* note that add_handle() sets a timeout to trigger soon so that the
+	necessary socket_action() gets called */
	}

	/* This gets called by glib whenever data is received from the fifo */

docs/examples/headerapi.c+1 -1

@@ -51,7 +51,7 @@ int main(void)
	/* this example just ignores the content */
	curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, write_cb);

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/hiperfifo.c+5 -4

@@ -358,8 +358,8 @@ static void new_conn(char url, GlobalInfo g)
	rc = curl_multi_add_handle(g->multi, conn->easy);
	mcode_or_die("new_conn: curl_multi_add_handle", rc);

-	/* note that the add_handle() will set a time-out to trigger soon so that
-	the necessary socket_action() call will be called by this app */
+	/* note that the add_handle() sets a time-out to trigger soon so that
+	the necessary socket_action() gets called */
	}

	/* This gets called whenever data is received from the fifo */
@@ -454,8 +454,9 @@ int main(int argc, char **argv)

	event_base_dispatch(g.evbase);

-	/* this, of course, will not get called since only way to stop this program
-	is via ctrl-C, but it is here to show how cleanup /would/ be done. */
+	/* this, of course, does not get called since the only way to stop this
+	program is via ctrl-C, but it is here to show how cleanup /would/ be
+	done. */
	clean_fifo(&g);
	event_del(&g.timer_event);
	event_base_free(g.evbase);

docs/examples/hsts-preload.c+1 -1

@@ -104,7 +104,7 @@ int main(void)

	curl_easy_setopt(curl, CURLOPT_VERBOSE, 1L);

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/http-options.c+2 -2

@@ -42,10 +42,10 @@ int main(void)
	curl_easy_setopt(curl, CURLOPT_REQUEST_TARGET, "*");

	/* if this operation fails, allow risking a memory leak and do quick exit
-	from libcurl as this will exit() anyway */
+	from libcurl as this exits anyway */
	curl_easy_setopt(curl, CURLOPT_QUICK_EXIT, 1L);

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/http-post.c+2 -2

@@ -33,7 +33,7 @@ int main(void)
	CURL *curl;
	CURLcode res;

-	/* In windows, this will init the winsock stuff */
+	/* In windows, this inits the winsock stuff */
	curl_global_init(CURL_GLOBAL_ALL);

	/* get a curl handle */
@@ -46,7 +46,7 @@ int main(void)
	/* Now specify the POST data */
	curl_easy_setopt(curl, CURLOPT_POSTFIELDS, "name=daniel&project=curl");

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/http2-download.c+3 -3

@@ -39,9 +39,9 @@
	#include <curl/mprintf.h>

	#ifndef CURLPIPE_MULTIPLEX
-	/* This little trick will just make sure that we do not enable pipelining for
-	libcurls old enough to not have this symbol. It is _not_ defined to zero in
-	a recent libcurl header. */
+	/* This little trick makes sure that we do not enable pipelining for libcurls
+	old enough to not have this symbol. It is _not_ defined to zero in a recent
+	libcurl header. */
	#define CURLPIPE_MULTIPLEX 0
	#endif

docs/examples/http2-upload.c+3 -3

@@ -41,9 +41,9 @@
	#include <curl/mprintf.h>

	#ifndef CURLPIPE_MULTIPLEX
-	/* This little trick will just make sure that we do not enable pipelining for
-	libcurls old enough to not have this symbol. It is _not_ defined to zero in
-	a recent libcurl header. */
+	/* This little trick makes sure that we do not enable pipelining for libcurls
+	old enough to not have this symbol. It is _not_ defined to zero in a recent
+	libcurl header. */
	#define CURLPIPE_MULTIPLEX 0
	#endif

docs/examples/http3.c+1 -1

@@ -41,7 +41,7 @@ int main(void)
	curl_easy_setopt(curl, CURLOPT_HTTP_VERSION,
	(long)CURL_HTTP_VERSION_3);

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/httpput-postfields.c+1 -1

@@ -58,7 +58,7 @@ int main(int argc, char **argv)

	url = argv[1];

-	/* In windows, this will init the winsock stuff */
+	/* In windows, this inits the winsock stuff */
	curl_global_init(CURL_GLOBAL_ALL);

	/* get a curl handle */

docs/examples/httpput.c+1 -1

@@ -82,7 +82,7 @@ int main(int argc, char **argv)
	an example! */
	hd_src = fopen(file, "rb");

-	/* In windows, this will init the winsock stuff */
+	/* In windows, this inits the winsock stuff */
	curl_global_init(CURL_GLOBAL_ALL);

	/* get a curl handle */

docs/examples/https.c+3 -3

@@ -57,8 +57,8 @@ int main(void)
	/*
	* If the site you are connecting to uses a different host name that what
	* they have mentioned in their server certificate's commonName (or
-	* subjectAltName) fields, libcurl will refuse to connect. You can skip
-	* this check, but this will make the connection less secure.
+	* subjectAltName) fields, libcurl refuses to connect. You can skip this
+	* check, but it makes the connection insecure.
	*/
	curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0L);
	#endif
@@ -66,7 +66,7 @@ int main(void)
	/* cache the CA cert bundle in memory for a week */
	curl_easy_setopt(curl, CURLOPT_CA_CACHE_TIMEOUT, 604800L);

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/imap-append.c+1 -1

@@ -99,7 +99,7 @@ int main(void)
	curl_easy_setopt(curl, CURLOPT_USERNAME, "user");
	curl_easy_setopt(curl, CURLOPT_PASSWORD, "secret");

-	/* This will create a new message in folder "Sent". */
+	/* This creates a new message in folder "Sent". */
	curl_easy_setopt(curl, CURLOPT_URL, "imap://imap.example.com/Sent");

	/* In this case, we are using a callback function to specify the data. You

docs/examples/imap-authzid.c+1 -1

@@ -53,7 +53,7 @@ int main(void)
	/* Force PLAIN authentication */
	curl_easy_setopt(curl, CURLOPT_LOGIN_OPTIONS, "AUTH=PLAIN");

-	/* This will fetch message 1 from the user's inbox */
+	/* This fetches message 1 from the user's inbox */
	curl_easy_setopt(curl, CURLOPT_URL,
	"imap://imap.example.com/INBOX/;UID=1");

docs/examples/imap-copy.c+1 -1

@@ -53,7 +53,7 @@ int main(void)
	/* Set the COPY command specifying the message ID and destination folder */
	curl_easy_setopt(curl, CURLOPT_CUSTOMREQUEST, "COPY 1 FOLDER");

-	/* Note that to perform a move operation you will need to perform the copy,
+	/* Note that to perform a move operation you need to perform the copy,
	* then mark the original mail as Deleted and EXPUNGE or CLOSE. Please see
	* imap-store.c for more information on deleting messages. */

docs/examples/imap-fetch.c+1 -1

@@ -47,7 +47,7 @@ int main(void)
	curl_easy_setopt(curl, CURLOPT_USERNAME, "user");
	curl_easy_setopt(curl, CURLOPT_PASSWORD, "secret");

-	/* This will fetch message 1 from the user's inbox */
+	/* This fetches message 1 from the user's inbox */
	curl_easy_setopt(curl, CURLOPT_URL,
	"imap://imap.example.com/INBOX/;UID=1");

docs/examples/imap-list.c+2 -2

@@ -47,8 +47,8 @@ int main(void)
	curl_easy_setopt(curl, CURLOPT_USERNAME, "user");
	curl_easy_setopt(curl, CURLOPT_PASSWORD, "secret");

-	/* This will list the folders within the user's mailbox. If you want to
-	* list the folders within a specific folder, for example the inbox, then
+	/* This lists the folders within the user's mailbox. If you want to list
+	* the folders within a specific folder, for example the inbox, then
	* specify the folder as a path in the URL such as /INBOX */
	curl_easy_setopt(curl, CURLOPT_URL, "imap://imap.example.com");

docs/examples/imap-multi.c+1 -1

@@ -56,7 +56,7 @@ int main(void)
	curl_easy_setopt(curl, CURLOPT_USERNAME, "user");
	curl_easy_setopt(curl, CURLOPT_PASSWORD, "secret");

-	/* This will fetch message 1 from the user's inbox */
+	/* This fetches message 1 from the user's inbox */
	curl_easy_setopt(curl, CURLOPT_URL, "imap://imap.example.com/INBOX/;UID=1");

	/* Tell the multi stack about our easy handle */

docs/examples/imap-ssl.c+4 -4

@@ -48,7 +48,7 @@ int main(void)
	curl_easy_setopt(curl, CURLOPT_USERNAME, "user");
	curl_easy_setopt(curl, CURLOPT_PASSWORD, "secret");

-	/* This will fetch message 1 from the user's inbox. Note the use of
+	/* This fetches message 1 from the user's inbox. Note the use of
	* imaps:// rather than imap:// to request a SSL based connection. */
	curl_easy_setopt(curl, CURLOPT_URL,
	"imaps://imap.example.com/INBOX/;UID=1");
@@ -67,13 +67,13 @@ int main(void)

	/* If the site you are connecting to uses a different host name that what
	* they have mentioned in their server certificate's commonName (or
-	* subjectAltName) fields, libcurl will refuse to connect. You can skip
-	* this check, but this will make the connection less secure. */
+	* subjectAltName) fields, libcurl refuses to connect. You can skip this
+	* check, but it makes the connection insecure. */
	#ifdef SKIP_HOSTNAME_VERIFICATION
	curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0L);
	#endif

-	/* Since the traffic will be encrypted, it is useful to turn on debug
+	/* Since the traffic is encrypted, it is useful to turn on debug
	* information within libcurl to see what is happening during the
	* transfer */
	curl_easy_setopt(curl, CURLOPT_VERBOSE, 1L);

docs/examples/imap-tls.c+6 -6

@@ -48,14 +48,14 @@ int main(void)
	curl_easy_setopt(curl, CURLOPT_USERNAME, "user");
	curl_easy_setopt(curl, CURLOPT_PASSWORD, "secret");

-	/* This will fetch message 1 from the user's inbox */
+	/* This fetches message 1 from the user's inbox */
	curl_easy_setopt(curl, CURLOPT_URL,
	"imap://imap.example.com/INBOX/;UID=1");

-	/* In this example, we will start with a plain text connection, and upgrade
-	* to Transport Layer Security (TLS) using the STARTTLS command. Be careful
-	* of using CURLUSESSL_TRY here, because if TLS upgrade fails, the transfer
-	* will continue anyway - see the security discussion in the libcurl
+	/* In this example, we start with a plain text connection, and upgrade to
+	* Transport Layer Security (TLS) using the STARTTLS command. Be careful
+	* of using CURLUSESSL_TRY here, because if TLS upgrade fails, the
+	* transfer continues anyway - see the security discussion in the libcurl
	* tutorial for more details. */
	curl_easy_setopt(curl, CURLOPT_USE_SSL, (long)CURLUSESSL_ALL);

@@ -73,7 +73,7 @@ int main(void)
	* for more information. */
	curl_easy_setopt(curl, CURLOPT_CAINFO, "/path/to/certificate.pem");

-	/* Since the traffic will be encrypted, it is useful to turn on debug
+	/* Since the traffic is encrypted, it is useful to turn on debug
	* information within libcurl to see what is happening during the
	* transfer */
	curl_easy_setopt(curl, CURLOPT_VERBOSE, 1L);

docs/examples/localport.c+2 -2

@@ -38,8 +38,8 @@ int main(void)
	/* Try to use a local port number between 20000-20009 */
	curl_easy_setopt(curl, CURLOPT_LOCALPORT, 20000L);
	/* 10 means number of attempts, which starts with the number set in
-	CURLOPT_LOCALPORT. The lowe value set, the smaller the change it will
-	work. */
+	CURLOPT_LOCALPORT. The lower value set, the smaller the chance it
+	works. */
	curl_easy_setopt(curl, CURLOPT_LOCALPORTRANGE, 10L);
	curl_easy_setopt(curl, CURLOPT_URL, "https://curl.se/");

docs/examples/maxconnects.c+1 -1

@@ -51,7 +51,7 @@ int main(void)
	while(urls[i]) {
	curl_easy_setopt(curl, CURLOPT_URL, urls[i]);

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/multi-app.c+1 -1

@@ -60,7 +60,7 @@ int main(void)
	for(i = 0; i<HANDLECOUNT; i++)
	handles[i] = curl_easy_init();

-	/* set the options (I left out a few, you will get the point anyway) */
+	/* set the options (I left out a few, you get the point anyway) */
	curl_easy_setopt(handles[HTTP_HANDLE], CURLOPT_URL, "https://example.com");

	curl_easy_setopt(handles[FTP_HANDLE], CURLOPT_URL, "ftp://example.com");

docs/examples/multi-debugcallback.c+1 -1

@@ -133,7 +133,7 @@ int main(void)

	http_handle = curl_easy_init();

-	/* set the options (I left out a few, you will get the point anyway) */
+	/* set the options (I left out a few, you get the point anyway) */
	curl_easy_setopt(http_handle, CURLOPT_URL, "https://www.example.com/");

	curl_easy_setopt(http_handle, CURLOPT_DEBUGFUNCTION, my_trace);

docs/examples/multi-event.c+2 -3

@@ -98,7 +98,7 @@ static void check_multi_info(void)
	case CURLMSG_DONE:
	/* Do not use message data after calling curl_multi_remove_handle() and
	curl_easy_cleanup(). As per curl_multi_info_read() docs:
-	"WARNING: The data the returned pointer points to will not survive
+	"WARNING: The data the returned pointer points to does not survive
	calling curl_multi_cleanup, curl_multi_remove_handle or
	curl_easy_cleanup." */
	easy_handle = message->easy_handle;
@@ -155,8 +155,7 @@ static int start_timeout(CURLM multi, long timeout_ms, void userp)
	}
	else {
	if(timeout_ms == 0)
-	timeout_ms = 1; /* 0 means directly call socket_action, but we will do it
-	in a bit */
+	timeout_ms = 1; /* 0 means call socket_action asap */
	struct timeval tv;
	tv.tv_sec = timeout_ms / 1000;
	tv.tv_usec = (timeout_ms % 1000) * 1000;

docs/examples/multi-legacy.c+1 -1

@@ -60,7 +60,7 @@ int main(void)
	for(i = 0; i<HANDLECOUNT; i++)
	handles[i] = curl_easy_init();

-	/* set the options (I left out a few, you will get the point anyway) */
+	/* set the options (I left out a few, you get the point anyway) */
	curl_easy_setopt(handles[HTTP_HANDLE], CURLOPT_URL, "https://example.com");

	curl_easy_setopt(handles[FTP_HANDLE], CURLOPT_URL, "ftp://example.com");

docs/examples/multi-single.c+1 -1

@@ -49,7 +49,7 @@ int main(void)

	http_handle = curl_easy_init();

-	/* set the options (I left out a few, you will get the point anyway) */
+	/* set the options (I left out a few, you get the point anyway) */
	curl_easy_setopt(http_handle, CURLOPT_URL, "https://www.example.com/");

	/* init a multi stack */

docs/examples/multi-uv.c+2 -3

@@ -108,7 +108,7 @@ static void check_multi_info(void)
	case CURLMSG_DONE:
	/* Do not use message data after calling curl_multi_remove_handle() and
	curl_easy_cleanup(). As per curl_multi_info_read() docs:
-	"WARNING: The data the returned pointer points to will not survive
+	"WARNING: The data the returned pointer points to does not survive
	calling curl_multi_cleanup, curl_multi_remove_handle or
	curl_easy_cleanup." */
	easy_handle = message->easy_handle;
@@ -165,8 +165,7 @@ static int start_timeout(CURLM multi, long timeout_ms, void userp)
	}
	else {
	if(timeout_ms == 0)
-	timeout_ms = 1; /* 0 means directly call socket_action, but we will do it
-	in a bit */
+	timeout_ms = 1; /* 0 means call socket_action asap */
	uv_timer_start(&timeout, on_timeout, timeout_ms, 0);
	}
	return 0;

docs/examples/parseurl.c+2 -2

@@ -48,7 +48,7 @@ int main(void)
	if(uc)
	goto fail;

-	/* extract host name from the parsed URL */
+	/* extract hostname from the parsed URL */
	uc = curl_url_get(h, CURLUPART_HOST, &host, 0);
	if(!uc) {
	printf("Host name: %s\n", host);
@@ -75,6 +75,6 @@ int main(void)
	}

	fail:
-	curl_url_cleanup(h); /* free url handle */
+	curl_url_cleanup(h); /* free URL handle */
	return 0;
	}

docs/examples/persistent.c+2 -2

@@ -44,7 +44,7 @@ int main(void)
	/* get the first document */
	curl_easy_setopt(curl, CURLOPT_URL, "https://example.com/");

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)
@@ -55,7 +55,7 @@ int main(void)
	connection */
	curl_easy_setopt(curl, CURLOPT_URL, "https://example.com/docs/");

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/pop3-authzid.c+1 -1

@@ -53,7 +53,7 @@ int main(void)
	/* Force PLAIN authentication */
	curl_easy_setopt(curl, CURLOPT_LOGIN_OPTIONS, "AUTH=PLAIN");

-	/* This will retrieve message 1 from the user's mailbox */
+	/* This retrieves message 1 from the user's mailbox */
	curl_easy_setopt(curl, CURLOPT_URL, "pop3://pop.example.com/1");

	/* Perform the retr */

docs/examples/pop3-list.c+1 -1

@@ -47,7 +47,7 @@ int main(void)
	curl_easy_setopt(curl, CURLOPT_USERNAME, "user");
	curl_easy_setopt(curl, CURLOPT_PASSWORD, "secret");

-	/* This will list every message of the given mailbox */
+	/* This lists every message of the given mailbox */
	curl_easy_setopt(curl, CURLOPT_URL, "pop3://pop.example.com");

	/* Perform the list */

docs/examples/pop3-multi.c+1 -1

@@ -56,7 +56,7 @@ int main(void)
	curl_easy_setopt(curl, CURLOPT_USERNAME, "user");
	curl_easy_setopt(curl, CURLOPT_PASSWORD, "secret");

-	/* This will retrieve message 1 from the user's mailbox */
+	/* This retrieves message 1 from the user's mailbox */
	curl_easy_setopt(curl, CURLOPT_URL, "pop3://pop.example.com/1");

	/* Tell the multi stack about our easy handle */

docs/examples/pop3-retr.c+1 -1

@@ -47,7 +47,7 @@ int main(void)
	curl_easy_setopt(curl, CURLOPT_USERNAME, "user");
	curl_easy_setopt(curl, CURLOPT_PASSWORD, "secret");

-	/* This will retrieve message 1 from the user's mailbox */
+	/* This retrieves message 1 from the user's mailbox */
	curl_easy_setopt(curl, CURLOPT_URL, "pop3://pop.example.com/1");

	/* Perform the retr */

docs/examples/pop3-ssl.c+4 -4

@@ -48,7 +48,7 @@ int main(void)
	curl_easy_setopt(curl, CURLOPT_USERNAME, "user");
	curl_easy_setopt(curl, CURLOPT_PASSWORD, "secret");

-	/* This will retrieve message 1 from the user's mailbox. Note the use of
+	/* This retrieves message 1 from the user's mailbox. Note the use of
	* pop3s:// rather than pop3:// to request a SSL based connection. */
	curl_easy_setopt(curl, CURLOPT_URL, "pop3s://pop.example.com/1");

@@ -66,13 +66,13 @@ int main(void)

	/* If the site you are connecting to uses a different host name that what
	* they have mentioned in their server certificate's commonName (or
-	* subjectAltName) fields, libcurl will refuse to connect. You can skip
-	* this check, but this will make the connection less secure. */
+	* subjectAltName) fields, libcurl refuses to connect. You can skip this
+	* check, but it makes the connection insecure. */
	#ifdef SKIP_HOSTNAME_VERIFICATION
	curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0L);
	#endif

-	/* Since the traffic will be encrypted, it is useful to turn on debug
+	/* Since the traffic is encrypted, it is useful to turn on debug
	* information within libcurl to see what is happening during the
	* transfer */
	curl_easy_setopt(curl, CURLOPT_VERBOSE, 1L);

docs/examples/pop3-tls.c+6 -6

@@ -48,14 +48,14 @@ int main(void)
	curl_easy_setopt(curl, CURLOPT_USERNAME, "user");
	curl_easy_setopt(curl, CURLOPT_PASSWORD, "secret");

-	/* This will retrieve message 1 from the user's mailbox */
+	/* This retrieves message 1 from the user's mailbox */
	curl_easy_setopt(curl, CURLOPT_URL, "pop3://pop.example.com/1");

-	/* In this example, we will start with a plain text connection, and upgrade
-	* to Transport Layer Security (TLS) using the STLS command. Be careful of
+	/* In this example, we start with a plain text connection, and upgrade to
+	* Transport Layer Security (TLS) using the STLS command. Be careful of
	* using CURLUSESSL_TRY here, because if TLS upgrade fails, the transfer
-	* will continue anyway - see the security discussion in the libcurl
-	* tutorial for more details. */
+	* continues anyway - see the security discussion in the libcurl tutorial
+	* for more details. */
	curl_easy_setopt(curl, CURLOPT_USE_SSL, (long)CURLUSESSL_ALL);

	/* If your server does not have a valid certificate, then you can disable
@@ -72,7 +72,7 @@ int main(void)
	* for more information. */
	curl_easy_setopt(curl, CURLOPT_CAINFO, "/path/to/certificate.pem");

-	/* Since the traffic will be encrypted, it is useful to turn on debug
+	/* Since the traffic is encrypted, it is useful to turn on debug
	* information within libcurl to see what is happening during the
	* transfer */
	curl_easy_setopt(curl, CURLOPT_VERBOSE, 1L);

docs/examples/post-callback.c+2 -2

@@ -73,7 +73,7 @@ int main(void)
	wt.readptr = data;
	wt.sizeleft = strlen(data);

-	/* In windows, this will init the winsock stuff */
+	/* In windows, this inits the winsock stuff */
	res = curl_global_init(CURL_GLOBAL_DEFAULT);
	/* Check for errors */
	if(res != CURLE_OK) {
@@ -141,7 +141,7 @@ int main(void)
	}
	#endif

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/postinmemory.c+3 -4

@@ -63,7 +63,7 @@ int main(void)
	struct MemoryStruct chunk;
	static const char *postthis = "Field=1&Field=2&Field=3";

-	chunk.memory = malloc(1); /* will be grown as needed by realloc above */
+	chunk.memory = malloc(1); /* grown as needed by realloc above */
	chunk.size = 0; /* no data at this point */

	curl_global_init(CURL_GLOBAL_ALL);
@@ -83,11 +83,10 @@ int main(void)

	curl_easy_setopt(curl, CURLOPT_POSTFIELDS, postthis);

-	/* if we do not provide POSTFIELDSIZE, libcurl will strlen() by
-	itself */
+	/* if we do not provide POSTFIELDSIZE, libcurl calls strlen() by itself */
	curl_easy_setopt(curl, CURLOPT_POSTFIELDSIZE, (long)strlen(postthis));

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK) {

docs/examples/postit2-formadd.c+4 -4

@@ -27,17 +27,17 @@
	*/

	/*
-	* Example code that uploads a file name 'foo' to a remote script that accepts
+	* Example code that uploads a filename 'foo' to a remote script that accepts
	* "HTML form based" (as described in RFC 1738) uploads using HTTP POST.
	*
	* Warning: this example uses the deprecated form api. See "postit2.c"
	* for a similar example using the mime api.
	*
-	* The imaginary form we will fill in looks like:
+	* The imaginary form we fill in looks like:
	*
	* <form method="post" enctype="multipart/form-data" action="examplepost.cgi">
	* Enter file: <input type="file" name="sendfile" size="40">
-	* Enter file name: <input type="text" name="filename" size="30">
+	* Enter filename: <input type="text" name="filename" size="30">
	* <input type="submit" value="send" name="submit">
	* </form>
	*/
@@ -93,7 +93,7 @@ int main(int argc, char *argv[])
	curl_easy_setopt(curl, CURLOPT_HTTPHEADER, headerlist);
	curl_easy_setopt(curl, CURLOPT_HTTPPOST, formpost);

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/postit2.c+4 -4

@@ -25,14 +25,14 @@
	* HTTP Multipart formpost with file upload and two additional parts.
	* </DESC>
	*/
-	/* Example code that uploads a file name 'foo' to a remote script that accepts
+	/* Example code that uploads a filename 'foo' to a remote script that accepts
	* "HTML form based" (as described in RFC 1738) uploads using HTTP POST.
	*
-	* The imaginary form we will fill in looks like:
+	* The imaginary form we fill in looks like:
	*
	* <form method="post" enctype="multipart/form-data" action="examplepost.cgi">
	* Enter file: <input type="file" name="sendfile" size="40">
-	* Enter file name: <input type="text" name="filename" size="30">
+	* Enter filename: <input type="text" name="filename" size="30">
	* <input type="submit" value="send" name="submit">
	* </form>
	*
@@ -85,7 +85,7 @@ int main(int argc, char *argv[])
	curl_easy_setopt(curl, CURLOPT_HTTPHEADER, headerlist);
	curl_easy_setopt(curl, CURLOPT_MIMEPOST, form);

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/range.c+1 -1

@@ -22,7 +22,7 @@
	*
	***************************************************************************/
	/* <DESC>
-	* GET a range only of a HTTP resource
+	* GET a range only of an HTTP resource
	* </DESC>
	*/
	#include <curl/curl.h>

docs/examples/resolve.c+4 -4

@@ -22,7 +22,7 @@
	*
	***************************************************************************/
	/* <DESC>
-	* Use CURLOPT_RESOLVE to feed custom IP addresses for given host name + port
+	* Use CURLOPT_RESOLVE to feed custom IP addresses for given hostname + port
	* number combinations.
	* </DESC>
	*/
@@ -35,9 +35,9 @@ int main(void)
	CURLcode res = CURLE_OK;

	/* Each single name resolve string should be written using the format
-	HOST:PORT:ADDRESS where HOST is the name libcurl will try to resolve,
-	PORT is the port number of the service where libcurl wants to connect to
-	the HOST and ADDRESS is the numerical IP address
+	HOST:PORT:ADDRESS where HOST is the name libcurl tries to resolve, PORT
+	is the port number of the service where libcurl wants to connect to the
+	HOST and ADDRESS is the numerical IP address
	*/
	struct curl_slist *host = curl_slist_append(NULL,
	"example.com:443:127.0.0.1");

docs/examples/rtsp-options.c+1 -1

@@ -41,7 +41,7 @@ int main(void)

	curl_easy_setopt(curl, CURLOPT_RTSP_REQUEST, CURL_RTSPREQ_OPTIONS);

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/sendrecv.c+1 -2

@@ -100,8 +100,7 @@ int main(void)
	return 1;
	}

-	/* Extract the socket from the curl handle - we will need it for
-	waiting. */
+	/* Extract the socket from the curl handle - we need it for waiting. */
	res = curl_easy_getinfo(curl, CURLINFO_ACTIVESOCKET, &sockfd);

	if(res != CURLE_OK) {

docs/examples/sftpget.c+4 -4

@@ -34,10 +34,10 @@
	#undef DISABLE_SSH_AGENT

	/*
-	* This is an example showing how to get a single file from an SFTP server.
-	* It delays the actual destination file creation until the first write
-	* callback so that it will not create an empty file in case the remote file
-	* does not exist or something else fails.
+	* This is an example showing how to get a single file from an SFTP server. It
+	* delays the actual destination file creation until the first write callback
+	* so that it does not create an empty file in case the remote file does not
+	* exist or something else fails.
	*/

	struct FtpFile {

docs/examples/shared-connection-cache.c+3 -3

@@ -57,8 +57,8 @@ int main(void)
	curl_share_setopt(share, CURLSHOPT_LOCKFUNC, my_lock);
	curl_share_setopt(share, CURLSHOPT_UNLOCKFUNC, my_unlock);

-	/* Loop the transfer and cleanup the handle properly every lap. This will
-	still reuse connections since the pool is in the shared object! */
+	/* Loop the transfer and cleanup the handle properly every lap. This still
+	reuses connections since the pool is in the shared object! */

	for(i = 0; i < 3; i++) {
	CURL *curl = curl_easy_init();
@@ -70,7 +70,7 @@ int main(void)
	/* use the share object */
	curl_easy_setopt(curl, CURLOPT_SHARE, share);

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/simple.c+1 -1

@@ -39,7 +39,7 @@ int main(void)
	/* example.com is redirected, so we tell libcurl to follow redirection */
	curl_easy_setopt(curl, CURLOPT_FOLLOWLOCATION, 1L);

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/simplepost.c+2 -3

@@ -41,11 +41,10 @@ int main(void)
	curl_easy_setopt(curl, CURLOPT_URL, "https://example.com");
	curl_easy_setopt(curl, CURLOPT_POSTFIELDS, postthis);

-	/* if we do not provide POSTFIELDSIZE, libcurl will strlen() by
-	itself */
+	/* if we do not provide POSTFIELDSIZE, libcurl calls strlen() by itself */
	curl_easy_setopt(curl, CURLOPT_POSTFIELDSIZE, (long)strlen(postthis));

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/simplessl.c+2 -2

@@ -38,7 +38,7 @@
	3.2. set pEngine to the name of the crypto engine you use
	3.3. set pKeyName to the key identifier you want to use
	4. if you do not use a crypto engine:
-	4.1. set pKeyName to the file name of your client key
+	4.1. set pKeyName to the filename of your client key
	4.2. if the format of the key file is DER, set pKeyType to "DER"

	!! verify of the server certificate is not implemented here !!
@@ -124,7 +124,7 @@ int main(void)
	/* disconnect if we cannot validate server's cert */
	curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, 1L);

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/smooth-gtk-thread.c+2 -2

@@ -113,8 +113,8 @@ gboolean pulse_bar(gpointer data)
	gtk_progress_bar_pulse(GTK_PROGRESS_BAR (data));
	gdk_threads_leave();

-	/* Return true so the function will be called again;
-	* returning false removes this timeout function.
+	/* Return true so the function is called again; returning false removes this
+	* timeout function.
	*/
	return TRUE;
	}

docs/examples/smtp-authzid.c+3 -3

@@ -115,8 +115,8 @@ int main(void)
	/* Force PLAIN authentication */
	curl_easy_setopt(curl, CURLOPT_LOGIN_OPTIONS, "AUTH=PLAIN");

-	/* Note that this option is not strictly required, omitting it will result
-	* in libcurl sending the MAIL FROM command with empty sender data. All
+	/* Note that this option is not strictly required, omitting it results in
+	* libcurl sending the MAIL FROM command with empty sender data. All
	* autoresponses should have an empty reverse-path, and should be directed
	* to the address in the reverse-path which triggered them. Otherwise,
	* they could cause an endless loop. See RFC 5321 Section 4.5.5 for more
@@ -147,7 +147,7 @@ int main(void)
	/* Free the list of recipients */
	curl_slist_free_all(recipients);

-	/* curl will not send the QUIT command until you call cleanup, so you
+	/* curl does not send the QUIT command until you call cleanup, so you
	* should be able to reuse this connection for additional messages
	* (setting CURLOPT_MAIL_FROM and CURLOPT_MAIL_RCPT as required, and
	* calling curl_easy_perform() again. It may not be a good idea to keep

docs/examples/smtp-expn.c+1 -1

@@ -68,7 +68,7 @@ int main(void)
	/* Free the list of recipients */
	curl_slist_free_all(recipients);

-	/* curl will not send the QUIT command until you call cleanup, so you
+	/* curl does not send the QUIT command until you call cleanup, so you
	* should be able to reuse this connection for additional requests. It may
	* not be a good idea to keep the connection open for a long time though
	* (more than a few minutes may result in the server timing out the

docs/examples/smtp-mail.c+3 -3

@@ -101,8 +101,8 @@ int main(void)
	/* This is the URL for your mailserver */
	curl_easy_setopt(curl, CURLOPT_URL, "smtp://mail.example.com");

-	/* Note that this option is not strictly required, omitting it will result
-	* in libcurl sending the MAIL FROM command with empty sender data. All
+	/* Note that this option is not strictly required, omitting it results in
+	* libcurl sending the MAIL FROM command with empty sender data. All
	* autoresponses should have an empty reverse-path, and should be directed
	* to the address in the reverse-path which triggered them. Otherwise,
	* they could cause an endless loop. See RFC 5321 Section 4.5.5 for more
@@ -135,7 +135,7 @@ int main(void)
	/* Free the list of recipients */
	curl_slist_free_all(recipients);

-	/* curl will not send the QUIT command until you call cleanup, so you
+	/* curl does not send the QUIT command until you call cleanup, so you
	* should be able to reuse this connection for additional messages
	* (setting CURLOPT_MAIL_FROM and CURLOPT_MAIL_RCPT as required, and
	* calling curl_easy_perform() again. It may not be a good idea to keep

docs/examples/smtp-mime.c+3 -3

@@ -86,8 +86,8 @@ int main(void)
	/* This is the URL for your mailserver */
	curl_easy_setopt(curl, CURLOPT_URL, "smtp://mail.example.com");

-	/* Note that this option is not strictly required, omitting it will result
-	* in libcurl sending the MAIL FROM command with empty sender data. All
+	/* Note that this option is not strictly required, omitting it results in
+	* libcurl sending the MAIL FROM command with empty sender data. All
	* autoresponses should have an empty reverse-path, and should be directed
	* to the address in the reverse-path which triggered them. Otherwise,
	* they could cause an endless loop. See RFC 5321 Section 4.5.5 for more
@@ -150,7 +150,7 @@ int main(void)
	curl_slist_free_all(recipients);
	curl_slist_free_all(headers);

-	/* curl will not send the QUIT command until you call cleanup, so you
+	/* curl does not send the QUIT command until you call cleanup, so you
	* should be able to reuse this connection for additional messages
	* (setting CURLOPT_MAIL_FROM and CURLOPT_MAIL_RCPT as required, and
	* calling curl_easy_perform() again. It may not be a good idea to keep

docs/examples/smtp-multi.c+1 -1

@@ -103,7 +103,7 @@ int main(void)
	/* This is the URL for your mailserver */
	curl_easy_setopt(curl, CURLOPT_URL, "smtp://mail.example.com");

-	/* Note that this option is not strictly required, omitting it will result in
+	/* Note that this option is not strictly required, omitting it results in
	* libcurl sending the MAIL FROM command with empty sender data. All
	* autoresponses should have an empty reverse-path, and should be directed
	* to the address in the reverse-path which triggered them. Otherwise, they

docs/examples/smtp-ssl.c+5 -5

@@ -117,14 +117,14 @@ int main(void)

	/* If the site you are connecting to uses a different host name that what
	* they have mentioned in their server certificate's commonName (or
-	* subjectAltName) fields, libcurl will refuse to connect. You can skip
-	* this check, but this will make the connection less secure. */
+	* subjectAltName) fields, libcurl refuses to connect. You can skip this
+	* check, but it makes the connection insecure. */
	#ifdef SKIP_HOSTNAME_VERIFICATION
	curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0L);
	#endif

-	/* Note that this option is not strictly required, omitting it will result
-	* in libcurl sending the MAIL FROM command with empty sender data. All
+	/* Note that this option is not strictly required, omitting it results in
+	* libcurl sending the MAIL FROM command with empty sender data. All
	* autoresponses should have an empty reverse-path, and should be directed
	* to the address in the reverse-path which triggered them. Otherwise,
	* they could cause an endless loop. See RFC 5321 Section 4.5.5 for more
@@ -146,7 +146,7 @@ int main(void)
	curl_easy_setopt(curl, CURLOPT_READDATA, &upload_ctx);
	curl_easy_setopt(curl, CURLOPT_UPLOAD, 1L);

-	/* Since the traffic will be encrypted, it is useful to turn on debug
+	/* Since the traffic is encrypted, it is useful to turn on debug
	* information within libcurl to see what is happening during the
	* transfer */
	curl_easy_setopt(curl, CURLOPT_VERBOSE, 1L);

docs/examples/smtp-tls.c+7 -7

@@ -105,10 +105,10 @@ int main(void)
	* matches your server configuration. */
	curl_easy_setopt(curl, CURLOPT_URL, "smtp://mainserver.example.net:587");

-	/* In this example, we will start with a plain text connection, and upgrade
-	* to Transport Layer Security (TLS) using the STARTTLS command. Be careful
-	* of using CURLUSESSL_TRY here, because if TLS upgrade fails, the transfer
-	* will continue anyway - see the security discussion in the libcurl
+	/* In this example, we start with a plain text connection, and upgrade to
+	* Transport Layer Security (TLS) using the STARTTLS command. Be careful
+	* of using CURLUSESSL_TRY here, because if TLS upgrade fails, the
+	* transfer continues anyway - see the security discussion in the libcurl
	* tutorial for more details. */
	curl_easy_setopt(curl, CURLOPT_USE_SSL, (long)CURLUSESSL_ALL);

@@ -125,8 +125,8 @@ int main(void)
	* for more information. */
	curl_easy_setopt(curl, CURLOPT_CAINFO, "/path/to/certificate.pem");

-	/* Note that this option is not strictly required, omitting it will result
-	* in libcurl sending the MAIL FROM command with empty sender data. All
+	/* Note that this option is not strictly required, omitting it results in
+	* libcurl sending the MAIL FROM command with empty sender data. All
	* autoresponses should have an empty reverse-path, and should be directed
	* to the address in the reverse-path which triggered them. Otherwise,
	* they could cause an endless loop. See RFC 5321 Section 4.5.5 for more
@@ -148,7 +148,7 @@ int main(void)
	curl_easy_setopt(curl, CURLOPT_READDATA, &upload_ctx);
	curl_easy_setopt(curl, CURLOPT_UPLOAD, 1L);

-	/* Since the traffic will be encrypted, it is useful to turn on debug
+	/* Since the traffic is encrypted, it is useful to turn on debug
	* information within libcurl to see what is happening during the
	* transfer.
	*/

docs/examples/smtp-vrfy.c+1 -1

@@ -68,7 +68,7 @@ int main(void)
	/* Free the list of recipients */
	curl_slist_free_all(recipients);

-	/* curl will not send the QUIT command until you call cleanup, so you
+	/* curl does not send the QUIT command until you call cleanup, so you
	* should be able to reuse this connection for additional requests. It may
	* not be a good idea to keep the connection open for a long time though
	* (more than a few minutes may result in the server timing out the

docs/examples/synctime.c+4 -4

@@ -50,7 +50,7 @@
	* using HTTP protocol which has no problem with firewall/proxy.
	*
	* For this software to work, you should take note of these items.
-	* 1. Your firewall/proxy must allow your computer to surf internet.
+	* 1. Your firewall/proxy must allow your computer to surf Internet.
	* 2. Webserver system time must in sync with the NTP time server,
	* or at least provide an accurate time keeping.
	* 3. Webserver HTTP header does not provide the milliseconds units,
@@ -59,7 +59,7 @@
	* as Round-Trip delay time is not taken into consideration.
	* Compensation of network, firewall/proxy delay cannot be simply divide
	* the Round-Trip delay time by half.
-	* 5. Win32 SetSystemTime() API will set your computer clock according to
+	* 5. Win32 SetSystemTime() API sets your computer clock according to
	* GMT/UTC time. Therefore your computer timezone must be properly set.
	* 6. Webserver data should not be cached by the proxy server. Some
	* webserver provide Cache-Control to prevent caching.
@@ -71,7 +71,7 @@
	* tf.nist.gov/timefreq/service/firewall.htm
	*
	* Usage:
-	* This software will synchronise your computer clock only when you issue
+	* This software synchronises your computer clock only when you issue
	* it with --synctime. By default, it only display the webserver's clock.
	*
	* Written by: Frank (contributed to libcurl)
@@ -171,7 +171,7 @@ size_t SyncTime_CURL_WriteHeader(void *ptr, size_t size, size_t nmemb,
	break;
	}
	}
-	AutoSyncTime = 3; /* Computer clock will be adjusted */
+	AutoSyncTime = 3; /* Computer clock is adjusted */
	}
	else {
	AutoSyncTime = 0; /* Error in sscanf() fields conversion */

docs/examples/unixsocket.c+1 -1

@@ -53,7 +53,7 @@ int main(void)
	curl_easy_setopt(curl, CURLOPT_UNIX_SOCKET_PATH, PATH);
	#endif

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/usercertinmem.c+2 -3

@@ -199,8 +199,7 @@ int main(void)
	curl_easy_setopt(ch, CURLOPT_URL, "https://www.example.com/");
	curl_easy_setopt(ch, CURLOPT_SSLKEYTYPE, "PEM");

-	/* first try: retrieve page without user certificate and key -> will fail
-	*/
+	/* first try: retrieve page without user certificate and key -> fails */
	rv = curl_easy_perform(ch);
	if(rv == CURLE_OK) {
	printf("* transfer succeeded *\n");
@@ -209,7 +208,7 @@ int main(void)
	printf("* transfer failed *\n");
	}

-	/* second try: retrieve page using user certificate and key -> will succeed
+	/* second try: retrieve page using user certificate and key -> succeeds
	* load the certificate and key by installing a function doing the necessary
	* "modifications" to the SSL CONTEXT just before link init
	*/

docs/examples/websocket-cb.c+1 -1

@@ -54,7 +54,7 @@ int main(void)
	/* pass the easy handle to the callback */
	curl_easy_setopt(curl, CURLOPT_WRITEDATA, curl);

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)

docs/examples/websocket.c+1 -1

@@ -113,7 +113,7 @@ int main(void)

	curl_easy_setopt(curl, CURLOPT_CONNECT_ONLY, 2L); /* websocket style */

-	/* Perform the request, res will get the return code */
+	/* Perform the request, res gets the return code */
	res = curl_easy_perform(curl);
	/* Check for errors */
	if(res != CURLE_OK)