← Commit list

fda897f5a1

Daniel Stenberg
Daniel Stenberg
2022-09-19
SUCCESS Duration: 108s

Subject

docs: fix proselint complaints

Binary

Download Binary (3507 KB)

Architecture & Compiler Flags

Architecture: x86_64-linux-gnu Compiler: gcc (Ubuntu 11.4.0-1ubuntu1~22.04.3) 11.4.0

—

Build Log

$ git checkout -f fda897f5a17adda3250e069bfb43b2392bd8c7e8
Previous HEAD position was 4e6893307b CI/GHA: cancel outdated CI runs on new PR changes
HEAD is now at fda897f5a1 docs: fix proselint complaints

$ git clean -fdx
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing curl-config
Removing depcomp
Removing docs/Makefile
Removing docs/Makefile.in
Removing docs/cmdline-opts/Makefile
Removing docs/cmdline-opts/Makefile.in
Removing docs/curl.1
Removing docs/examples/.deps/
Removing docs/examples/Makefile
Removing docs/examples/Makefile.in
Removing docs/libcurl/Makefile
Removing docs/libcurl/Makefile.in
Removing docs/libcurl/opts/Makefile
Removing docs/libcurl/opts/Makefile.in
Removing include/Makefile
Removing include/Makefile.in
Removing include/curl/Makefile
Removing include/curl/Makefile.in
Removing install-sh
Removing lib/.deps/
Removing lib/.dirstamp
Removing lib/.libs/
Removing lib/Makefile
Removing lib/Makefile.in
Removing lib/curl_config.h
Removing lib/curl_config.h.in
Removing lib/curl_multibyte.o
Removing lib/dynbuf.o
Removing lib/libcurl.la
Removing lib/libcurl.plist
Removing lib/libcurl.vers
Removing lib/libcurl_la-altsvc.lo
Removing lib/libcurl_la-altsvc.o
Removing lib/libcurl_la-amigaos.lo
Removing lib/libcurl_la-amigaos.o
Removing lib/libcurl_la-asyn-ares.lo
Removing lib/libcurl_la-asyn-ares.o
Removing lib/libcurl_la-asyn-thread.lo
Removing lib/libcurl_la-asyn-thread.o
Removing lib/libcurl_la-base64.lo
Removing lib/libcurl_la-base64.o
Removing lib/libcurl_la-bufref.lo
Removing lib/libcurl_la-bufref.o
Removing lib/libcurl_la-c-hyper.lo
Removing lib/libcurl_la-c-hyper.o
Removing lib/libcurl_la-conncache.lo
Removing lib/libcurl_la-conncache.o
Removing lib/libcurl_la-connect.lo
Removing lib/libcurl_la-connect.o
Removing lib/libcurl_la-content_encoding.lo
Removing lib/libcurl_la-content_encoding.o
Removing lib/libcurl_la-cookie.lo
Removing lib/libcurl_la-cookie.o
Removing lib/libcurl_la-curl_addrinfo.lo
Removing lib/libcurl_la-curl_addrinfo.o
Removing lib/libcurl_la-curl_des.lo
Removing lib/libcurl_la-curl_des.o
Removing lib/libcurl_la-curl_endian.lo
Removing lib/libcurl_la-curl_endian.o
Removing lib/libcurl_la-curl_fnmatch.lo
Removing lib/libcurl_la-curl_fnmatch.o
Removing lib/libcurl_la-curl_get_line.lo
Removing lib/libcurl_la-curl_get_line.o
Removing lib/libcurl_la-curl_gethostname.lo
Removing lib/libcurl_la-curl_gethostname.o
Removing lib/libcurl_la-curl_gssapi.lo
Removing lib/libcurl_la-curl_gssapi.o
Removing lib/libcurl_la-curl_memrchr.lo
Removing lib/libcurl_la-curl_memrchr.o
Removing lib/libcurl_la-curl_multibyte.lo
Removing lib/libcurl_la-curl_multibyte.o
Removing lib/libcurl_la-curl_ntlm_core.lo
Removing lib/libcurl_la-curl_ntlm_core.o
Removing lib/libcurl_la-curl_ntlm_wb.lo
Removing lib/libcurl_la-curl_ntlm_wb.o
Removing lib/libcurl_la-curl_path.lo
Removing lib/libcurl_la-curl_path.o
Removing lib/libcurl_la-curl_range.lo
Removing lib/libcurl_la-curl_range.o
Removing lib/libcurl_la-curl_rtmp.lo
Removing lib/libcurl_la-curl_rtmp.o
Removing lib/libcurl_la-curl_sasl.lo
Removing lib/libcurl_la-curl_sasl.o
Removing lib/libcurl_la-curl_sspi.lo
Removing lib/libcurl_la-curl_sspi.o
Removing lib/libcurl_la-curl_threads.lo
Removing lib/libcurl_la-curl_threads.o
Removing lib/libcurl_la-dict.lo
Removing lib/libcurl_la-dict.o
Removing lib/libcurl_la-doh.lo
Removing lib/libcurl_la-doh.o
Removing lib/libcurl_la-dynbuf.lo
Removing lib/libcurl_la-dynbuf.o
Removing lib/libcurl_la-easy.lo
Removing lib/libcurl_la-easy.o
Removing lib/libcurl_la-easygetopt.lo
Removing lib/libcurl_la-easygetopt.o
Removing lib/libcurl_la-easyoptions.lo
Removing lib/libcurl_la-easyoptions.o
Removing lib/libcurl_la-escape.lo
Removing lib/libcurl_la-escape.o
Removing lib/libcurl_la-file.lo
Removing lib/libcurl_la-file.o
Removing lib/libcurl_la-fileinfo.lo
Removing lib/libcurl_la-fileinfo.o
Removing lib/libcurl_la-fopen.lo
Removing lib/libcurl_la-fopen.o
Removing lib/libcurl_la-formdata.lo
Removing lib/libcurl_la-formdata.o
Removing lib/libcurl_la-ftp.lo
Removing lib/libcurl_la-ftp.o
Removing lib/libcurl_la-ftplistparser.lo
Removing lib/libcurl_la-ftplistparser.o
Removing lib/libcurl_la-getenv.lo
Removing lib/libcurl_la-getenv.o
Removing lib/libcurl_la-getinfo.lo
Removing lib/libcurl_la-getinfo.o
Removing lib/libcurl_la-gopher.lo
Removing lib/libcurl_la-gopher.o
Removing lib/libcurl_la-h2h3.lo
Removing lib/libcurl_la-h2h3.o
Removing lib/libcurl_la-hash.lo
Removing lib/libcurl_la-hash.o
Removing lib/libcurl_la-headers.lo
Removing lib/libcurl_la-headers.o
Removing lib/libcurl_la-hmac.lo
Removing lib/libcurl_la-hmac.o
Removing lib/libcurl_la-hostasyn.lo
Removing lib/libcurl_la-hostasyn.o
Removing lib/libcurl_la-hostip.lo
Removing lib/libcurl_la-hostip.o
Removing lib/libcurl_la-hostip4.lo
Removing lib/libcurl_la-hostip4.o
Removing lib/libcurl_la-hostip6.lo
Removing lib/libcurl_la-hostip6.o
Removing lib/libcurl_la-hostsyn.lo
Removing lib/libcurl_la-hostsyn.o
Removing lib/libcurl_la-hsts.lo
Removing lib/libcurl_la-hsts.o
Removing lib/libcurl_la-http.lo
Removing lib/libcurl_la-http.o
Removing lib/libcurl_la-http2.lo
Removing lib/libcurl_la-http2.o
Removing lib/libcurl_la-http_aws_sigv4.lo
Removing lib/libcurl_la-http_aws_sigv4.o
Removing lib/libcurl_la-http_chunks.lo
Removing lib/libcurl_la-http_chunks.o
Removing lib/libcurl_la-http_digest.lo
Removing lib/libcurl_la-http_digest.o
Removing lib/libcurl_la-http_negotiate.lo
Removing lib/libcurl_la-http_negotiate.o
Removing lib/libcurl_la-http_ntlm.lo
Removing lib/libcurl_la-http_ntlm.o
Removing lib/libcurl_la-http_proxy.lo
Removing lib/libcurl_la-http_proxy.o
Removing lib/libcurl_la-idn_win32.lo
Removing lib/libcurl_la-idn_win32.o
Removing lib/libcurl_la-if2ip.lo
Removing lib/libcurl_la-if2ip.o
Removing lib/libcurl_la-imap.lo
Removing lib/libcurl_la-imap.o
Removing lib/libcurl_la-inet_ntop.lo
Removing lib/libcurl_la-inet_ntop.o
Removing lib/libcurl_la-inet_pton.lo
Removing lib/libcurl_la-inet_pton.o
Removing lib/libcurl_la-krb5.lo
Removing lib/libcurl_la-krb5.o
Removing lib/libcurl_la-ldap.lo
Removing lib/libcurl_la-ldap.o
Removing lib/libcurl_la-llist.lo
Removing lib/libcurl_la-llist.o
Removing lib/libcurl_la-md4.lo
Removing lib/libcurl_la-md4.o
Removing lib/libcurl_la-md5.lo
Removing lib/libcurl_la-md5.o
Removing lib/libcurl_la-memdebug.lo
Removing lib/libcurl_la-memdebug.o
Removing lib/libcurl_la-mime.lo
Removing lib/libcurl_la-mime.o
Removing lib/libcurl_la-mprintf.lo
Removing lib/libcurl_la-mprintf.o
Removing lib/libcurl_la-mqtt.lo
Removing lib/libcurl_la-mqtt.o
Removing lib/libcurl_la-multi.lo
Removing lib/libcurl_la-multi.o
Removing lib/libcurl_la-netrc.lo
Removing lib/libcurl_la-netrc.o
Removing lib/libcurl_la-nonblock.lo
Removing lib/libcurl_la-nonblock.o
Removing lib/libcurl_la-openldap.lo
Removing lib/libcurl_la-openldap.o
Removing lib/libcurl_la-parsedate.lo
Removing lib/libcurl_la-parsedate.o
Removing lib/libcurl_la-pingpong.lo
Removing lib/libcurl_la-pingpong.o
Removing lib/libcurl_la-pop3.lo
Removing lib/libcurl_la-pop3.o
Removing lib/libcurl_la-progress.lo
Removing lib/libcurl_la-progress.o
Removing lib/libcurl_la-psl.lo
Removing lib/libcurl_la-psl.o
Removing lib/libcurl_la-rand.lo
Removing lib/libcurl_la-rand.o
Removing lib/libcurl_la-rename.lo
Removing lib/libcurl_la-rename.o
Removing lib/libcurl_la-rtsp.lo
Removing lib/libcurl_la-rtsp.o
Removing lib/libcurl_la-select.lo
Removing lib/libcurl_la-select.o
Removing lib/libcurl_la-sendf.lo
Removing lib/libcurl_la-sendf.o
Removing lib/libcurl_la-setopt.lo
Removing lib/libcurl_la-setopt.o
Removing lib/libcurl_la-sha256.lo
Removing lib/libcurl_la-sha256.o
Removing lib/libcurl_la-share.lo
Removing lib/libcurl_la-share.o
Removing lib/libcurl_la-slist.lo
Removing lib/libcurl_la-slist.o
Removing lib/libcurl_la-smb.lo
Removing lib/libcurl_la-smb.o
Removing lib/libcurl_la-smtp.lo
Removing lib/libcurl_la-smtp.o
Removing lib/libcurl_la-socketpair.lo
Removing lib/libcurl_la-socketpair.o
Removing lib/libcurl_la-socks.lo
Removing lib/libcurl_la-socks.o
Removing lib/libcurl_la-socks_gssapi.lo
Removing lib/libcurl_la-socks_gssapi.o
Removing lib/libcurl_la-socks_sspi.lo
Removing lib/libcurl_la-socks_sspi.o
Removing lib/libcurl_la-speedcheck.lo
Removing lib/libcurl_la-speedcheck.o
Removing lib/libcurl_la-splay.lo
Removing lib/libcurl_la-splay.o
Removing lib/libcurl_la-strcase.lo
Removing lib/libcurl_la-strcase.o
Removing lib/libcurl_la-strdup.lo
Removing lib/libcurl_la-strdup.o
Removing lib/libcurl_la-strerror.lo
Removing lib/libcurl_la-strerror.o
Removing lib/libcurl_la-strtok.lo
Removing lib/libcurl_la-strtok.o
Removing lib/libcurl_la-strtoofft.lo
Removing lib/libcurl_la-strtoofft.o
Removing lib/libcurl_la-system_win32.lo
Removing lib/libcurl_la-system_win32.o
Removing lib/libcurl_la-telnet.lo
Removing lib/libcurl_la-telnet.o
Removing lib/libcurl_la-tftp.lo
Removing lib/libcurl_la-tftp.o
Removing lib/libcurl_la-timediff.lo
Removing lib/libcurl_la-timediff.o
Removing lib/libcurl_la-timeval.lo
Removing lib/libcurl_la-timeval.o
Removing lib/libcurl_la-transfer.lo
Removing lib/libcurl_la-transfer.o
Removing lib/libcurl_la-url.lo
Removing lib/libcurl_la-url.o
Removing lib/libcurl_la-urlapi.lo
Removing lib/libcurl_la-urlapi.o
Removing lib/libcurl_la-version.lo
Removing lib/libcurl_la-version.o
Removing lib/libcurl_la-version_win32.lo
Removing lib/libcurl_la-version_win32.o
Removing lib/libcurl_la-warnless.lo
Removing lib/libcurl_la-warnless.o
Removing lib/libcurl_la-wildcard.lo
Removing lib/libcurl_la-wildcard.o
Removing lib/libcurl_la-ws.lo
Removing lib/libcurl_la-ws.o
Removing lib/nonblock.o
Removing lib/stamp-h1
Removing lib/strtoofft.o
Removing lib/timediff.o
Removing lib/vauth/.deps/
Removing lib/vauth/.dirstamp
Removing lib/vauth/libcurl_la-cleartext.lo
Removing lib/vauth/libcurl_la-cleartext.o
Removing lib/vauth/libcurl_la-cram.lo
Removing lib/vauth/libcurl_la-cram.o
Removing lib/vauth/libcurl_la-digest.lo
Removing lib/vauth/libcurl_la-digest.o
Removing lib/vauth/libcurl_la-digest_sspi.lo
Removing lib/vauth/libcurl_la-digest_sspi.o
Removing lib/vauth/libcurl_la-gsasl.lo
Removing lib/vauth/libcurl_la-gsasl.o
Removing lib/vauth/libcurl_la-krb5_gssapi.lo
Removing lib/vauth/libcurl_la-krb5_gssapi.o
Removing lib/vauth/libcurl_la-krb5_sspi.lo
Removing lib/vauth/libcurl_la-krb5_sspi.o
Removing lib/vauth/libcurl_la-ntlm.lo
Removing lib/vauth/libcurl_la-ntlm.o
Removing lib/vauth/libcurl_la-ntlm_sspi.lo
Removing lib/vauth/libcurl_la-ntlm_sspi.o
Removing lib/vauth/libcurl_la-oauth2.lo
Removing lib/vauth/libcurl_la-oauth2.o
Removing lib/vauth/libcurl_la-spnego_gssapi.lo
Removing lib/vauth/libcurl_la-spnego_gssapi.o
Removing lib/vauth/libcurl_la-spnego_sspi.lo
Removing lib/vauth/libcurl_la-spnego_sspi.o
Removing lib/vauth/libcurl_la-vauth.lo
Removing lib/vauth/libcurl_la-vauth.o
Removing lib/version_win32.o
Removing lib/vquic/.deps/
Removing lib/vquic/.dirstamp
Removing lib/vquic/libcurl_la-msh3.lo
Removing lib/vquic/libcurl_la-msh3.o
Removing lib/vquic/libcurl_la-ngtcp2.lo
Removing lib/vquic/libcurl_la-ngtcp2.o
Removing lib/vquic/libcurl_la-quiche.lo
Removing lib/vquic/libcurl_la-quiche.o
Removing lib/vquic/libcurl_la-vquic.lo
Removing lib/vquic/libcurl_la-vquic.o
Removing lib/vssh/.deps/
Removing lib/vssh/.dirstamp
Removing lib/vssh/libcurl_la-libssh.lo
Removing lib/vssh/libcurl_la-libssh.o
Removing lib/vssh/libcurl_la-libssh2.lo
Removing lib/vssh/libcurl_la-libssh2.o
Removing lib/vssh/libcurl_la-wolfssh.lo
Removing lib/vssh/libcurl_la-wolfssh.o
Removing lib/vtls/.deps/
Removing lib/vtls/.dirstamp
Removing lib/vtls/libcurl_la-bearssl.lo
Removing lib/vtls/libcurl_la-bearssl.o
Removing lib/vtls/libcurl_la-gskit.lo
Removing lib/vtls/libcurl_la-gskit.o
Removing lib/vtls/libcurl_la-gtls.lo
Removing lib/vtls/libcurl_la-gtls.o
Removing lib/vtls/libcurl_la-hostcheck.lo
Removing lib/vtls/libcurl_la-hostcheck.o
Removing lib/vtls/libcurl_la-keylog.lo
Removing lib/vtls/libcurl_la-keylog.o
Removing lib/vtls/libcurl_la-mbedtls.lo
Removing lib/vtls/libcurl_la-mbedtls.o
Removing lib/vtls/libcurl_la-mbedtls_threadlock.lo
Removing lib/vtls/libcurl_la-mbedtls_threadlock.o
Removing lib/vtls/libcurl_la-nss.lo
Removing lib/vtls/libcurl_la-nss.o
Removing lib/vtls/libcurl_la-openssl.lo
Removing lib/vtls/libcurl_la-openssl.o
Removing lib/vtls/libcurl_la-rustls.lo
Removing lib/vtls/libcurl_la-rustls.o
Removing lib/vtls/libcurl_la-schannel.lo
Removing lib/vtls/libcurl_la-schannel.o
Removing lib/vtls/libcurl_la-schannel_verify.lo
Removing lib/vtls/libcurl_la-schannel_verify.o
Removing lib/vtls/libcurl_la-sectransp.lo
Removing lib/vtls/libcurl_la-sectransp.o
Removing lib/vtls/libcurl_la-vtls.lo
Removing lib/vtls/libcurl_la-vtls.o
Removing lib/vtls/libcurl_la-wolfssl.lo
Removing lib/vtls/libcurl_la-wolfssl.o
Removing lib/vtls/libcurl_la-x509asn1.lo
Removing lib/vtls/libcurl_la-x509asn1.o
Removing lib/warnless.o
Removing libcurl.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing packages/Makefile
Removing packages/Makefile.in
Removing packages/vms/Makefile
Removing packages/vms/Makefile.in
Removing scripts/Makefile
Removing scripts/Makefile.in
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/curl
Removing src/slist_wc.o
Removing src/tool_binmode.o
Removing src/tool_bname.o
Removing src/tool_cb_dbg.o
Removing src/tool_cb_hdr.o
Removing src/tool_cb_prg.o
Removing src/tool_cb_rea.o
Removing src/tool_cb_see.o
Removing src/tool_cb_wrt.o
Removing src/tool_cfgable.o
Removing src/tool_dirhie.o
Removing src/tool_doswin.o
Removing src/tool_easysrc.o
Removing src/tool_filetime.o
Removing src/tool_findfile.o
Removing src/tool_formparse.o
Removing src/tool_getparam.o
Removing src/tool_getpass.o
Removing src/tool_help.o
Removing src/tool_helpers.o
Removing src/tool_hugehelp.c
Removing src/tool_hugehelp.o
Removing src/tool_libinfo.o
Removing src/tool_listhelp.o
Removing src/tool_main.o
Removing src/tool_msgs.o
Removing src/tool_operate.o
Removing src/tool_operhlp.o
Removing src/tool_panykey.o
Removing src/tool_paramhlp.o
Removing src/tool_parsecfg.o
Removing src/tool_progress.o
Removing src/tool_setopt.o
Removing src/tool_sleep.o
Removing src/tool_strdup.o
Removing src/tool_urlglob.o
Removing src/tool_util.o
Removing src/tool_vms.o
Removing src/tool_writeout.o
Removing src/tool_writeout_json.o
Removing src/tool_xattr.o
Removing test-driver
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/certs/Makefile
Removing tests/certs/Makefile.in
Removing tests/certs/scripts/Makefile
Removing tests/certs/scripts/Makefile.in
Removing tests/configurehelp.pm
Removing tests/data/Makefile
Removing tests/data/Makefile.in
Removing tests/libtest/.deps/
Removing tests/libtest/Makefile
Removing tests/libtest/Makefile.in
Removing tests/server/.deps/
Removing tests/server/Makefile
Removing tests/server/Makefile.in
Removing tests/unit/.deps/
Removing tests/unit/Makefile
Removing tests/unit/Makefile.in

$ autoreconf -fi
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Remember to add 'LT_INIT' to configure.ac.
configure.ac:125: warning: AC_PROG_CC was called before XC_CHECK_PROG_CC
m4/xc-cc-check.m4:86: XC_CHECK_PROG_CC is expanded from...
configure.ac:125: the top level
configure.ac:352: warning: LT_LANG was called before LT_INIT
m4/libtool.m4:61: LT_INIT is expanded from...
m4/xc-lt-iface.m4:442: XC_LIBTOOL is expanded from...
configure.ac:352: the top level
configure.ac:58: installing './compile'
configure.ac:335: installing './config.guess'
configure.ac:335: installing './config.sub'
configure.ac:125: installing './install-sh'
configure.ac:131: installing './missing'
docs/examples/Makefile.am: installing './depcomp'
parallel-tests: installing './test-driver'

$ bash -c find . -name config.guess -exec cp /usr/share/misc/config.guess {} \;

$ bash -c find . -name config.sub -exec cp /usr/share/misc/config.sub {} \;

$ chmod +x configure

$ ./configure --disable-shared --without-ssl --disable-docs
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... no
checking whether to disable dependency on -lrt... (assumed no)
checking whether to enable ECH support... no
checking for path separator... :
checking for windres... no
checking for gcc... ccache gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether ccache gcc accepts -g... yes
checking for ccache gcc option to enable C11 features... none needed
checking whether ccache gcc understands -c and -o together... yes
checking for a sed that does not truncate output... /usr/bin/sed
checking how to print strings... printf
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for ar... /usr/bin/ar
checking for a BSD-compatible install... /usr/bin/install -c
checking how to run the C preprocessor... ccache gcc -E
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of ccache gcc... gcc3
checking curl version... 7.86.0-DEV
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defined... no
checking if _THREAD_SAFE is actually needed... no
checking if _THREAD_SAFE is onwards defined... no
checking if _REENTRANT is already defined... no
checking if _REENTRANT is actually needed... no
checking if _REENTRANT is onwards defined... no
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking for fgrep... /usr/bin/grep -F
checking for ld used by ccache gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from  object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking for dlfcn.h... yes
checking for objdir... .libs
checking if ccache gcc supports -fno-rtti -fno-exceptions... no
checking for ccache gcc option to produce PIC... -fPIC -DPIC
checking if ccache gcc PIC flag -fPIC -DPIC works... yes
checking if ccache gcc static flag -static works... yes
checking if ccache gcc supports -c -o file.o... yes
checking if ccache gcc supports -c -o file.o... (cached) yes
checking whether the ccache gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether to build shared libraries with -version-info... yes
checking whether to build shared libraries with -no-undefined... no
checking whether to build shared libraries with -mimpure-text... no
checking whether to build shared libraries with PIC... yes
checking whether to build static libraries with PIC... yes
checking whether to build shared libraries only... no
checking whether to build static libraries only... yes
checking for inline... inline
checking if cpp -P is needed... yes
checking if cpp -P works... yes
checking if compiler is DEC/Compaq/HP C... no
checking if compiler is HP-UX C... no
checking if compiler is IBM C... no
checking if compiler is Intel C... no
checking if compiler is clang... no
checking if compiler is GNU C... yes
checking if compiler is LCC... no
checking if compiler is SGI MIPSpro C... no
checking if compiler is SGI MIPS C... no
checking if compiler is SunPro C... no
checking if compiler is Tiny C... no
checking if compiler accepts some basic options... yes
configure: compiler options added: -Werror-implicit-function-declaration 
checking if compiler optimizer assumed setting might be used... no
checking if compiler accepts strict warning options... yes
configure: compiler options added: -Wno-system-headers 
checking if compiler halts on compilation errors... yes
checking if compiler halts on negative sized arrays... yes
checking if compiler halts on function prototype mismatch... yes
checking if compiler supports hiding library internal symbols... yes
checking for windows.h... no
checking whether build target is a native Windows one... no
checking whether build target supports WIN32 file API... no
checking whether build target supports WIN32 crypto API... no
checking for good-to-use Darwin CFLAGS... no
checking whether to link macOS CoreFoundation and SystemConfiguration framework... no
checking to see if the compiler supports __builtin_available()... no
checking whether to support http... yes
checking whether to support ftp... yes
checking whether to support file... yes
checking whether to support ldap... yes
checking whether to support ldaps... yes
checking whether to support rtsp... yes
checking whether to support proxies... yes
checking whether to support dict... yes
checking whether to support telnet... yes
checking whether to support tftp... yes
checking whether to support pop3... yes
checking whether to support imap... yes
checking whether to support smb... yes
checking whether to support smtp... yes
checking whether to support gopher... yes
checking whether to support mqtt... no
checking whether to provide built-in manual... yes
checking whether to enable generation of C code... yes
checking whether to use libgcc... no
checking if X/Open network library is required... no
checking for gethostbyname... yes
checking for windows.h... (cached) no
checking for winsock2.h... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for pkg-config... /usr/bin/pkg-config
checking for zlib options with pkg-config... found
checking for zlib.h... yes
configure: found both libz and libz.h header
checking for BrotliDecoderDecompress in -lbrotlidec... no
checking for brotli/decode.h... no
checking for ZSTD_createDStream in -lzstd... no
checking for zstd.h... no
checking for lber.h... no
checking for ldap.h... no
checking for ldap_ssl.h... no
checking for LDAP libraries... cannot find LDAP libraries
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... yes
checking if GSS-API support is requested... no
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Secure Transport... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for library containing psl_builtin... -lpsl
checking for library containing gsasl_init... no
checking for RTMP_Init in -lrtmp... no
checking whether versioned symbols are wanted... no
checking whether to enable Windows native IDN (Windows native builds only)... no
checking whether to build with libidn2... (assumed) yes
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libidn2 options with pkg-config... no
configure: IDN_LIBS: "-lidn2"
configure: IDN_LDFLAGS: ""
configure: IDN_CPPFLAGS: ""
configure: IDN_DIR: ""
checking if idn2_lookup_ul can be linked... no
checking for idn2.h... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libnghttp2 options with pkg-config... no
checking for nghttp2_session_set_local_window_size in -lnghttp2... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for libngtcp2 options with pkg-config... no
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for fish options with pkg-config... no
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for sys/select.h... yes
checking for sys/socket.h... yes
checking for sys/ioctl.h... yes
checking for sys/uio.h... yes
checking for assert.h... yes
checking for unistd.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for arpa/inet.h... yes
checking for net/if.h... yes
checking for netinet/in.h... yes
checking for netinet/in6.h... no
checking for sys/un.h... yes
checking for linux/tcp.h... yes
checking for netinet/tcp.h... yes
checking for netinet/udp.h... yes
checking for netdb.h... yes
checking for sys/sockio.h... no
checking for sys/stat.h... (cached) yes
checking for sys/param.h... yes
checking for termios.h... yes
checking for termio.h... yes
checking for fcntl.h... yes
checking for io.h... no
checking for pwd.h... yes
checking for utime.h... yes
checking for sys/utime.h... no
checking for sys/poll.h... yes
checking for poll.h... yes
checking for socket.h... no
checking for sys/resource.h... yes
checking for libgen.h... yes
checking for locale.h... yes
checking for errno.h... yes
checking for stdbool.h... yes
checking for arpa/tftp.h... yes
checking for sys/filio.h... no
checking for sys/wait.h... yes
checking for setjmp.h... yes
checking for an ANSI C-conforming const... yes
checking for compiler support of C99 variadic macro style... yes
checking for compiler support of old gcc variadic macro style... yes
checking for size_t... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for struct timeval... yes
checking run-time libs availability... fine
checking size of size_t... 8
checking size of long... 8
checking size of int... 4
checking size of time_t... 8
checking size of off_t... 8
checking size of curl_off_t... 8
checking for long long... yes
checking for ssize_t... yes
checking for bool... yes
checking for sa_family_t... yes
checking for suseconds_t... yes
checking if time_t is unsigned... no
checking for sys/types.h... (cached) yes
checking for poll.h... (cached) yes
checking for sys/poll.h... (cached) yes
checking for in_addr_t... yes
checking for struct sockaddr_storage... yes
checking for sys/select.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for select... yes
checking types of args and return type for select... int,fd_set *,struct timeval *,int
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for recv... yes
checking types of args and return type for recv... int,void *,size_t,int,ssize_t
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for send... yes
checking types of args and return type for send... int,const void *,size_t,int,ssize_t
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for MSG_NOSIGNAL... yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking if alarm can be linked... yes
checking if alarm is prototyped... yes
checking if alarm is compilable... yes
checking if alarm usage allowed... yes
checking if alarm might be used... yes
checking for sys/types.h... (cached) yes
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
checking for sys/types.h... (cached) yes
checking for libgen.h... (cached) yes
checking if basename can be linked... yes
checking if basename is prototyped... yes
checking if basename is compilable... yes
checking if basename usage allowed... yes
checking if basename might be used... yes
checking for sys/types.h... (cached) yes
checking for socket.h... (cached) no
checking if closesocket can be linked... no
checking if closesocket might be used... no
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking if CloseSocket can be linked... no
checking if CloseSocket might be used... no
checking if connect can be linked... yes
checking if connect is prototyped... yes
checking if connect is compilable... yes
checking if connect usage allowed... yes
checking if connect might be used... yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking for fcntl.h... (cached) yes
checking if fcntl can be linked... yes
checking if fcntl is prototyped... yes
checking if fcntl is compilable... yes
checking if fcntl usage allowed... yes
checking if fcntl might be used... yes
checking if fcntl O_NONBLOCK is compilable... yes
checking if fcntl O_NONBLOCK usage allowed... yes
checking if fcntl O_NONBLOCK might be used... yes
checking for windows.h... (cached) no
checking for winsock2.h... (cached) no
checking for ws2tcpip.h... (cached) no
checking for sys/types.h... (cached) yes
checking for netdb.h... (cached) yes
checking if freeaddrinfo can be linked... yes
checking if freeaddrinfo is prototyped... yes
checking if freeaddrinfo is compilable... yes
checking if freeaddrinfo usage allowed... yes
checking if freeaddrinfo might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/xattr.h... yes
checking if fsetxattr can be linked... yes
checking if fsetxattr is prototyped... yes
checking if fsetxattr takes 5 args.... yes
checking if fsetxattr is compilable... yes
checking if fsetxattr usage allowed... yes
checking if fsetxattr might be used... yes
checking if ftruncate can be linked... yes
checking if ftruncate is prototyped... yes
checking if ftruncate is compilable... yes
checking if ftruncate usage allowed... yes
checking if ftruncate might be used... yes
checking for sys/types.h... (cached) yes
checking for stdlib.h... (cached) yes
checking if getaddrinfo can be linked... yes
checking if getaddrinfo is prototyped... yes
checking if getaddrinfo is compilable... yes
checking if getaddrinfo seems to work... yes
checking if getaddrinfo usage allowed... yes
checking if getaddrinfo might be used... yes
checking if getaddrinfo is threadsafe... yes
checking if gethostbyname can be linked... yes
checking if gethostbyname is prototyped... yes
checking if gethostbyname is compilable... yes
checking if gethostbyname usage allowed... yes
checking if gethostbyname might be used... yes
checking if gethostbyname_r can be linked... yes
checking if gethostbyname_r is prototyped... yes
checking if gethostbyname_r takes 3 args.... no
checking if gethostbyname_r takes 5 args.... no
checking if gethostbyname_r takes 6 args.... yes
checking if gethostbyname_r is compilable... yes
checking if gethostbyname_r usage allowed... yes
checking if gethostbyname_r might be used... yes
checking if gethostname can be linked... yes
checking if gethostname is prototyped... yes
checking if gethostname is compilable... yes
checking for gethostname arg 2 data type... size_t
checking if gethostname usage allowed... yes
checking if gethostname might be used... yes
checking if getpeername can be linked... yes
checking if getpeername is prototyped... yes
checking if getpeername is compilable... yes
checking if getpeername usage allowed... yes
checking if getpeername might be used... yes
checking if getsockname can be linked... yes
checking if getsockname is prototyped... yes
checking if getsockname is compilable... yes
checking if getsockname usage allowed... yes
checking if getsockname might be used... yes
checking for net/if.h... (cached) yes
checking if if_nametoindex can be linked... yes
checking if if_nametoindex is prototyped... yes
checking if if_nametoindex is compilable... yes
checking if if_nametoindex usage allowed... yes
checking if if_nametoindex might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for netinet/in.h... (cached) yes
checking for ifaddrs.h... yes
checking if getifaddrs can be linked... yes
checking if getifaddrs is prototyped... yes
checking if getifaddrs is compilable... yes
checking if getifaddrs seems to work... yes
checking if getifaddrs usage allowed... yes
checking if getifaddrs might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking if gmtime_r can be linked... yes
checking if gmtime_r is prototyped... yes
checking if gmtime_r is compilable... yes
checking if gmtime_r seems to work... yes
checking if gmtime_r usage allowed... yes
checking if gmtime_r might be used... yes
checking for sys/types.h... (cached) yes
checking for sys/socket.h... (cached) yes
checking for netinet/in.h... (cached) yes
checking for arpa/inet.h... (cached) yes
checking if inet_ntop can be linked... yes
checking if inet_ntop is prototyped... yes
checking if inet_ntop is compilable... yes
checking if inet_ntop seems to work... yes
checking if inet_ntop usage allowed... yes
checking if inet_ntop might be used... yes
checking if inet_pton can be linked... yes
checking if inet_pton is prototyped... yes
checking if inet_pton is compilable... yes
checking if inet_pton seems to work... yes
checking if inet_pton usage allowed... yes
checking if inet_pton might be used... yes
checking if ioctlsocket can be linked... no
checking if ioctlsocket might be used... no
checking if IoctlSocket can be linked... no
checking if IoctlSocket might be used... no
checking if memrchr can be linked... yes
checking if memrchr is prototyped... no
checking if memrchr might be used... no
checking if poll can be linked... yes
checking if poll is prototyped... yes
checking if poll is compilable... yes
checking if poll seems to work... yes
checking if poll usage allowed... yes
checking if poll might be used... yes
checking for sys/types.h... (cached) yes
checking for signal.h... yes
checking if sigaction can be linked... yes
checking if sigaction is prototyped... yes
checking if sigaction is compilable... yes
checking if sigaction usage allowed... yes
checking if sigaction might be used... yes
checking if siginterrupt can be linked... yes
checking if siginterrupt is prototyped... yes
checking if siginterrupt is compilable... yes
checking if siginterrupt usage allowed... yes
checking if siginterrupt might be used... yes
checking if signal can be linked... yes
checking if signal is prototyped... yes
checking if signal is compilable... yes
checking if signal usage allowed... yes
checking if signal might be used... yes
checking for sys/types.h... (cached) yes
checking for setjmp.h... (cached) yes
checking if sigsetjmp can be linked... no
checking if sigsetjmp seems a macro... yes
checking if sigsetjmp is compilable... yes
checking if sigsetjmp usage allowed... yes
checking if sigsetjmp might be used... yes
checking if socket can be linked... yes
checking if socket is prototyped... yes
checking if socket is compilable... yes
checking if socket usage allowed... yes
checking if socket might be used... yes
checking if socketpair can be linked... yes
checking if socketpair is prototyped... yes
checking if socketpair is compilable... yes
checking if socketpair usage allowed... yes
checking if socketpair might be used... yes
checking if strcasecmp can be linked... yes
checking if strcasecmp is prototyped... yes
checking if strcasecmp is compilable... yes
checking if strcasecmp usage allowed... yes
checking if strcasecmp might be used... yes
checking if strcmpi can be linked... no
checking if strcmpi might be used... no
checking if strdup can be linked... yes
checking if strdup is prototyped... yes
checking if strdup is compilable... yes
checking if strdup usage allowed... yes
checking if strdup might be used... yes
checking if strerror_r can be linked... yes
checking if strerror_r is prototyped... yes
checking if strerror_r is compilable... yes
checking if strerror_r is glibc like... no
checking if strerror_r is POSIX like... yes
checking if strerror_r seems to work... yes
checking if strerror_r usage allowed... yes
checking if strerror_r might be used... yes
checking if stricmp can be linked... no
checking if stricmp might be used... no
checking if strtok_r can be linked... yes
checking if strtok_r is prototyped... yes
checking if strtok_r is compilable... yes
checking if strtok_r usage allowed... yes
checking if strtok_r might be used... yes
checking if strtoll can be linked... yes
checking if strtoll is prototyped... yes
checking if strtoll is compilable... yes
checking if strtoll usage allowed... yes
checking if strtoll might be used... yes
checking for ccache gcc options needed to detect all undeclared functions... none needed
checking whether getpwuid_r is declared... yes
checking for fnmatch... yes
checking for fchmod... yes
checking for geteuid... yes
checking for getpass_r... no
checking deeper for getpass_r... but still no
checking for getppid... yes
checking for getpwuid... yes
checking for getpwuid_r... yes
checking for getrlimit... yes
checking for gettimeofday... yes
checking for if_nametoindex... yes
checking for mach_absolute_time... no
checking deeper for mach_absolute_time... but still no
checking for pipe... yes
checking for sched_yield... yes
checking for sendmsg... yes
checking for setlocale... yes
checking for setmode... no
checking deeper for setmode... but still no
checking for setrlimit... yes
checking for utime... yes
checking for utimes... yes
checking how to set a socket into non-blocking mode... fcntl O_NONBLOCK
checking for perl... /usr/bin/perl
checking for gnroff... no
checking for nroff... /usr/bin/nroff
checking how to use *nroff to get plain text from man pages... -man
checking whether to enable the threaded resolver... yes
checking whether to use POSIX threads for threaded resolver... auto
checking for pthread.h... yes
checking for pthread_create... yes
checking convert -I options to -isystem... yes
checking whether to enable verbose strings... yes
checking whether to enable SSPI support (Windows native builds only)... no
checking whether to enable cryptographic authentication methods... yes
checking whether to support NTLM... yes
checking whether to enable NTLM delegation to winbind's helper... no
checking whether to enable TLS-SRP authentication... yes
checking whether to enable Unix domain sockets... auto
checking for struct sockaddr_un.sun_path... yes
checking whether to support cookies... yes
checking whether to support socketpair... yes
checking whether to support HTTP authentication... yes
checking whether to support DoH... yes
checking whether to support the MIME API... yes
checking whether to support date parsing... yes
checking whether to support netrc parsing... yes
checking whether to support progress-meter... yes
checking whether to support DNS shuffling... yes
checking whether to support curl_easy_option*... yes
checking whether to support alt-svc... yes
checking whether to support headers-api... yes
configure: disables HSTS due to lack of SSL
checking whether to support WebSockets... no
checking whether hiding of library internal symbols will actually happen... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating docs/Makefile
config.status: creating docs/examples/Makefile
config.status: creating docs/libcurl/Makefile
config.status: creating docs/libcurl/opts/Makefile
config.status: creating docs/cmdline-opts/Makefile
config.status: creating include/Makefile
config.status: creating include/curl/Makefile
config.status: creating src/Makefile
config.status: creating lib/Makefile
config.status: creating scripts/Makefile
config.status: creating lib/libcurl.vers
config.status: creating lib/libcurl.plist
config.status: creating tests/Makefile
config.status: creating tests/certs/Makefile
config.status: creating tests/certs/scripts/Makefile
config.status: creating tests/data/Makefile
config.status: creating tests/server/Makefile
config.status: creating tests/libtest/Makefile
config.status: creating tests/unit/Makefile
config.status: creating packages/Makefile
config.status: creating packages/vms/Makefile
config.status: creating curl-config
config.status: creating libcurl.pc
config.status: creating lib/curl_config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: amending lib/Makefile
configure: amending src/Makefile
configure: amending tests/unit/Makefile
configure: amending tests/server/Makefile
configure: amending tests/libtest/Makefile
configure: amending docs/examples/Makefile
configure: Configured to build curl/libcurl:

  Host setup:       x86_64-pc-linux-gnu
  Install prefix:   /usr/local
  Compiler:         ccache gcc
   CFLAGS:          -g -O2 -Werror-implicit-function-declaration -Wno-system-headers
   CPPFLAGS:        
   LDFLAGS:         
   LIBS:            -lpsl -lz

  curl version:     7.86.0-DEV
  SSL:              no      (--with-{openssl,gnutls,nss,mbedtls,wolfssl,schannel,secure-transport,amissl,bearssl,rustls} )
  SSH:              no      (--with-{libssh,libssh2})
  zlib:             enabled
  brotli:           no      (--with-brotli)
  zstd:             no      (--with-zstd)
  GSS-API:          no      (--with-gssapi)
  GSASL:            no      (libgsasl not found)
  TLS-SRP:          no      (--enable-tls-srp)
  resolver:         POSIX threaded
  IPv6:             enabled
  Unix sockets:     enabled
  IDN:              no      (--with-{libidn2,winidn})
  Build libcurl:    Shared=no, Static=yes
  Built-in manual:  enabled
  --libcurl option: enabled (--disable-libcurl-option)
  Verbose errors:   enabled (--disable-verbose)
  Code coverage:    disabled
  SSPI:             no      (--enable-sspi)
  ca cert bundle:   no
  ca cert path:     
  ca fallback:      
  LDAP:             no      (--enable-ldap / --with-ldap-lib / --with-lber-lib)
  LDAPS:            no      (--enable-ldaps)
  RTSP:             enabled
  RTMP:             no      (--with-librtmp)
  PSL:              enabled
  Alt-svc:          enabled (--disable-alt-svc)
  Headers API:      enabled (--disable-headers-api)
  HSTS:             no      (--enable-hsts)
  HTTP1:            enabled (internal)
  HTTP2:            no      (--with-nghttp2, --with-hyper)
  HTTP3:            no      (--with-ngtcp2, --with-quiche --with-msh3)
  ECH:              no      (--enable-ech)
  WebSockets:       no      (--enable-websockets)
  Protocols:        DICT FILE FTP GOPHER HTTP IMAP MQTT POP3 RTSP SMTP TELNET TFTP
  Features:         AsynchDNS IPv6 Largefile PSL UnixSockets alt-svc libz threadsafe

configure: WARNING: unrecognized options: --disable-docs
configure: WARNING: Cannot find libraries for LDAP support: LDAP disabled
configure: WARNING: libgsasl was not found
configure: WARNING: Cannot find libraries for IDN support: IDN disabled
configure: WARNING: unrecognized options: --disable-docs

$ make -j3
Making all in lib
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
make  all-am
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
  CC       libcurl_la-altsvc.lo
  CC       libcurl_la-amigaos.lo
  CC       libcurl_la-asyn-ares.lo
  CC       libcurl_la-asyn-thread.lo
  CC       libcurl_la-base64.lo
  CC       libcurl_la-bufref.lo
  CC       libcurl_la-c-hyper.lo
  CC       libcurl_la-conncache.lo
  CC       libcurl_la-connect.lo
  CC       libcurl_la-content_encoding.lo
  CC       libcurl_la-cookie.lo
  CC       libcurl_la-curl_addrinfo.lo
  CC       libcurl_la-curl_des.lo
  CC       libcurl_la-curl_endian.lo
  CC       libcurl_la-curl_fnmatch.lo
  CC       libcurl_la-curl_get_line.lo
  CC       libcurl_la-curl_gethostname.lo
  CC       libcurl_la-curl_gssapi.lo
  CC       libcurl_la-curl_memrchr.lo
  CC       libcurl_la-curl_multibyte.lo
  CC       libcurl_la-curl_ntlm_core.lo
  CC       libcurl_la-curl_ntlm_wb.lo
  CC       libcurl_la-curl_path.lo
  CC       libcurl_la-curl_range.lo
  CC       libcurl_la-curl_rtmp.lo
  CC       libcurl_la-curl_sasl.lo
  CC       libcurl_la-curl_sspi.lo
  CC       libcurl_la-curl_threads.lo
  CC       libcurl_la-dict.lo
  CC       libcurl_la-doh.lo
  CC       libcurl_la-dynbuf.lo
  CC       libcurl_la-easy.lo
  CC       libcurl_la-easygetopt.lo
  CC       libcurl_la-easyoptions.lo
  CC       libcurl_la-escape.lo
  CC       libcurl_la-file.lo
  CC       libcurl_la-fileinfo.lo
  CC       libcurl_la-fopen.lo
  CC       libcurl_la-formdata.lo
  CC       libcurl_la-ftp.lo
  CC       libcurl_la-ftplistparser.lo
  CC       libcurl_la-getenv.lo
  CC       libcurl_la-getinfo.lo
  CC       libcurl_la-gopher.lo
  CC       libcurl_la-h2h3.lo
  CC       libcurl_la-hash.lo
  CC       libcurl_la-headers.lo
  CC       libcurl_la-hmac.lo
  CC       libcurl_la-hostasyn.lo
  CC       libcurl_la-hostip.lo
  CC       libcurl_la-hostip4.lo
  CC       libcurl_la-hostip6.lo
  CC       libcurl_la-hostsyn.lo
  CC       libcurl_la-hsts.lo
  CC       libcurl_la-http.lo
  CC       libcurl_la-http2.lo
  CC       libcurl_la-http_chunks.lo
  CC       libcurl_la-http_digest.lo
  CC       libcurl_la-http_negotiate.lo
  CC       libcurl_la-http_ntlm.lo
  CC       libcurl_la-http_proxy.lo
  CC       libcurl_la-http_aws_sigv4.lo
  CC       libcurl_la-idn_win32.lo
  CC       libcurl_la-if2ip.lo
  CC       libcurl_la-imap.lo
  CC       libcurl_la-inet_ntop.lo
  CC       libcurl_la-inet_pton.lo
  CC       libcurl_la-krb5.lo
  CC       libcurl_la-ldap.lo
  CC       libcurl_la-llist.lo
  CC       libcurl_la-md4.lo
  CC       libcurl_la-md5.lo
  CC       libcurl_la-memdebug.lo
  CC       libcurl_la-mime.lo
  CC       libcurl_la-mprintf.lo
  CC       libcurl_la-mqtt.lo
  CC       libcurl_la-multi.lo
  CC       libcurl_la-netrc.lo
  CC       libcurl_la-nonblock.lo
  CC       libcurl_la-openldap.lo
  CC       libcurl_la-parsedate.lo
  CC       libcurl_la-pingpong.lo
  CC       libcurl_la-pop3.lo
  CC       libcurl_la-progress.lo
  CC       libcurl_la-psl.lo
  CC       libcurl_la-rand.lo
  CC       libcurl_la-rename.lo
  CC       libcurl_la-rtsp.lo
  CC       libcurl_la-select.lo
  CC       libcurl_la-sendf.lo
  CC       libcurl_la-setopt.lo
  CC       libcurl_la-share.lo
  CC       libcurl_la-sha256.lo
  CC       libcurl_la-slist.lo
  CC       libcurl_la-smb.lo
  CC       libcurl_la-smtp.lo
  CC       libcurl_la-socketpair.lo
  CC       libcurl_la-socks.lo
  CC       libcurl_la-socks_gssapi.lo
  CC       libcurl_la-socks_sspi.lo
  CC       libcurl_la-speedcheck.lo
  CC       libcurl_la-splay.lo
  CC       libcurl_la-strcase.lo
  CC       libcurl_la-strdup.lo
  CC       libcurl_la-strerror.lo
  CC       libcurl_la-strtok.lo
  CC       libcurl_la-strtoofft.lo
  CC       libcurl_la-system_win32.lo
  CC       libcurl_la-telnet.lo
  CC       libcurl_la-tftp.lo
  CC       libcurl_la-timediff.lo
  CC       libcurl_la-timeval.lo
  CC       libcurl_la-transfer.lo
  CC       libcurl_la-url.lo
  CC       libcurl_la-urlapi.lo
  CC       libcurl_la-version.lo
  CC       libcurl_la-version_win32.lo
  CC       libcurl_la-warnless.lo
  CC       libcurl_la-wildcard.lo
  CC       libcurl_la-ws.lo
  CC       vauth/libcurl_la-cleartext.lo
  CC       vauth/libcurl_la-cram.lo
  CC       vauth/libcurl_la-digest.lo
  CC       vauth/libcurl_la-digest_sspi.lo
  CC       vauth/libcurl_la-gsasl.lo
  CC       vauth/libcurl_la-krb5_gssapi.lo
  CC       vauth/libcurl_la-krb5_sspi.lo
  CC       vauth/libcurl_la-ntlm.lo
  CC       vauth/libcurl_la-ntlm_sspi.lo
  CC       vauth/libcurl_la-oauth2.lo
  CC       vauth/libcurl_la-spnego_gssapi.lo
  CC       vauth/libcurl_la-spnego_sspi.lo
  CC       vauth/libcurl_la-vauth.lo
  CC       vtls/libcurl_la-bearssl.lo
  CC       vtls/libcurl_la-gskit.lo
  CC       vtls/libcurl_la-gtls.lo
  CC       vtls/libcurl_la-keylog.lo
  CC       vtls/libcurl_la-hostcheck.lo
  CC       vtls/libcurl_la-mbedtls.lo
  CC       vtls/libcurl_la-mbedtls_threadlock.lo
  CC       vtls/libcurl_la-nss.lo
  CC       vtls/libcurl_la-openssl.lo
  CC       vtls/libcurl_la-rustls.lo
  CC       vtls/libcurl_la-schannel.lo
  CC       vtls/libcurl_la-schannel_verify.lo
  CC       vtls/libcurl_la-sectransp.lo
  CC       vtls/libcurl_la-vtls.lo
  CC       vtls/libcurl_la-wolfssl.lo
  CC       vtls/libcurl_la-x509asn1.lo
  CC       vquic/libcurl_la-msh3.lo
  CC       vquic/libcurl_la-ngtcp2.lo
  CC       vquic/libcurl_la-quiche.lo
  CC       vquic/libcurl_la-vquic.lo
  CC       vssh/libcurl_la-libssh.lo
  CC       vssh/libcurl_la-libssh2.lo
  CC       vssh/libcurl_la-wolfssh.lo
  CCLD     libcurl.la
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/lib'
Making all in src
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/src'
Making all in ../docs
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
Making all in .
make[3]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
if test "..x" != "..x" -a -e "./curl.1"; then \
	/usr/bin/install -c -m 644 "./curl.1" /root/asi_db/builds/curl/_worktrees/w0/docs/curl.1; fi
cd cmdline-opts && make
make[4]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
generate ../../docs/curl.1
make[4]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
make[3]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
Making all in cmdline-opts
make[3]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs/cmdline-opts'
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/docs'
make[2]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0/src'
  CC       slist_wc.o
  CC       tool_bname.o
  CC       tool_binmode.o
  CC       tool_cb_dbg.o
  CC       tool_cb_hdr.o
  CC       tool_cb_prg.o
  CC       tool_cb_rea.o
  CC       tool_cb_see.o
  CC       tool_cb_wrt.o
  CC       tool_cfgable.o
  CC       tool_dirhie.o
  CC       tool_doswin.o
  CC       tool_easysrc.o
  CC       tool_filetime.o
  CC       tool_findfile.o
  CC       tool_formparse.o
  CC       tool_getparam.o
  CC       tool_getpass.o
  CC       tool_help.o
  CC       tool_helpers.o
  HUGE     tool_hugehelp.c
  CC       tool_libinfo.o
  CC       tool_listhelp.o
  CC       tool_main.o
  CC       tool_msgs.o
  CC       tool_operate.o
  CC       tool_operhlp.o
  CC       tool_panykey.o
  CC       tool_paramhlp.o
  CC       tool_parsecfg.o
  CC       tool_progress.o
  CC       tool_strdup.o
  CC       tool_setopt.o
  CC       tool_sleep.o
  CC       tool_urlglob.o
  CC       tool_util.o
  CC       tool_vms.o
  CC       tool_writeout.o
  CC       tool_writeout_json.o
  CC       tool_xattr.o
  CC       ../lib/strtoofft.o
  CC       ../lib/timediff.o
  CC       ../lib/nonblock.o
  CC       ../lib/warnless.o
  CC       ../lib/curl_multibyte.o
  CC       ../lib/version_win32.o
  CC       ../lib/dynbuf.o
  CC       tool_hugehelp.o
  CCLD     curl
make[2]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/src'
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0/src'
make[1]: Entering directory '/root/asi_db/builds/curl/_worktrees/w0'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/root/asi_db/builds/curl/_worktrees/w0'

Commit Diff GitHub →

README+3 -3
@@ -13,7 +13,7 @@ README
libcurl is the library curl is using to do its job. It is readily
available to be used by your software. Read the libcurl.3 man page to
- learn how!
+ learn how.
You find answers to the most frequent questions we get in the FAQ document.
@@ -36,7 +36,7 @@ WEBSITE
GIT
- To download the very latest source off the GIT server do this:
+ To download the latest source code off the GIT server do this:
git clone https://github.com/curl/curl.git
@@ -44,7 +44,7 @@ GIT
SECURITY PROBLEMS
- Report suspected security problems via our HackerOne page and not in public!
+ Report suspected security problems via our HackerOne page and not in public.
https://hackerone.com/curl
README.md+1 -1
@@ -64,7 +64,7 @@ To download the latest source from the Git server do this:
## Security problems
Report suspected security problems via [our HackerOne
-page](https://hackerone.com/curl) and not in public!
+page](https://hackerone.com/curl) and not in public.
## Notice
docs/CHECKSRC.md+6 -7
@@ -41,7 +41,7 @@ warnings are:
more appropriate `char *name` style. The asterisk should sit right next to
the name without a space in between.
-- `BADCOMMAND`: There's a bad `!checksrc!` instruction in the code. See the
+- `BADCOMMAND`: There's a bad `checksrc` instruction in the code. See the
**Ignore certain warnings** section below for details.
- `BANNEDFUNC`: A banned function was used. The functions sprintf, vsprintf,
@@ -56,7 +56,7 @@ warnings are:
- `COMMANOSPACE`: a comma without following space
-- `COPYRIGHT`: the file is missing a copyright statement!
+- `COPYRIGHT`: the file is missing a copyright statement
- `CPPCOMMENTS`: `//` comment detected, that is not C89 compliant
@@ -113,7 +113,7 @@ warnings are:
- `SPACESEMICOLON`: there was a space before semicolon, ` ;`.
-- `TABS`: TAB characters are not allowed!
+- `TABS`: TAB characters are not allowed
- `TRAILINGSPACE`: Trailing whitespace on the line
@@ -146,10 +146,9 @@ different ways to do this.
### Inline ignore
You can control what to ignore within a specific source file by providing
-instructions to checksrc in the source code itself. You need a magic marker
-that is `!checksrc!` followed by the instruction. The instruction can ask to
-ignore a specific warning N number of times or you ignore all of them until
-you mark the end of the ignored section.
+instructions to checksrc in the source code itself. See examples below. The
+instruction can ask to ignore a specific warning N number of times or you
+ignore all of them until you mark the end of the ignored section.
Inline ignores are only done for that single specific source code file.
docs/CONTRIBUTE.md+2 -2
@@ -291,8 +291,8 @@ still fine.
This means that all files need to have their license and copyright information
clearly stated. Ideally by having the standard curl source code header, with
an accurate copyright year range and the SPDX-License-Identifier included. If
-the header does not work, you can use a smaller header or as a last resort add
-the information for a specific file to the `.reuse/dep5` file.
+the header does not work, you can use a smaller header or add the information
+for a specific file to the `.reuse/dep5` file.
We update copyright year ranges to end on the year of the most recent change
of the individual file.
docs/DEPRECATE.md+2 -2
@@ -10,8 +10,8 @@ how your use case cannot be satisfied properly using a workaround.
We remove support for building curl with the NSS TLS library in August 2023.
-- There are very few users left who use curl+NSS
-- NSS has very few users outside of curl as well (primarily Firefox)
+- There are few users left who use curl+NSS
+- NSS has few users outside of curl as well (primarily Firefox)
- NSS is harder than ever to find documentation for
- NSS was always "best" used with Red Hat Linux when they provided additional
features on top of the regular NSS that is not shipped by the vanilla library
docs/HISTORY.md+2 -2
@@ -184,11 +184,11 @@ curl_formparse() function
August: Curl and libcurl 7.12.1
Public curl release number: 82
- Releases counted from the very beginning: 109
+ Releases counted from the beginning: 109
Available command line options: 96
Available curl_easy_setopt() options: 120
Number of public functions in libcurl: 36
- Amount of public website mirrors: 12
+ Amount of public website mirrors: 12
Number of known libcurl bindings: 26
2005
docs/HTTP3.md+1 -1
@@ -253,7 +253,7 @@ development and experimenting.
## Prerequisite(s)
An existing local HTTP/1.1 server that hosts files. Preferably also a few huge
-ones. You can easily create huge local files like `truncate -s=8G 8GB` - they
+ones. You can easily create huge local files like `truncate -s=8G 8GB` - they
are huge but do not occupy that much space on disk since they are just big
holes.
docs/INTERNALS.md+3 -4
@@ -64,7 +64,6 @@ Library Symbols
All symbols used internally in libcurl must use a `Curl_` prefix if they are
used in more than a single file. Single-file symbols must be made static.
- Public ("exported") symbols must use a `curl_` prefix. (There are exceptions,
- but they are to be changed to follow this pattern in future versions.) Public
- API functions are marked with `CURL_EXTERN` in the public header files so
- that all others can be hidden on platforms where this is possible.
+ Public ("exported") symbols must use a `curl_` prefix. Public API functions
+ are marked with `CURL_EXTERN` in the public header files so that all others
+ can be hidden on platforms where this is possible.
docs/SECURITY-PROCESS.md+2 -2
@@ -158,7 +158,7 @@ stall and never end, so applications that cannot deal with never-ending
transfers already need to have counter-measures established.
If the problem avoids the regular counter-measures when it causes a never-
-ending transfer, it might very well be a security problem.
+ending transfer, it might be a security problem.
## Not practically possible
@@ -208,7 +208,7 @@ security vulnerabilities.
- not all systems allow the arguments to be blanked in the first place
- since curl blanks the argument itself they will be readable for a short
- moment in time no matter what
+ moment no matter what
- virtually every argument can contain sensitive data, depending on use
- blanking all arguments would make it impractical for users to differentiate
curl command lines in process listings
docs/WEBSOCKET.md+2 -2
@@ -102,8 +102,8 @@ WebSocket myself.
Here are the reasons why I have decided to move forward with WebSocket in
curl **without using libWebSocket**:
-- doxygen generated docs only makes them very hard to navigate. No tutorial,
- no clearly written explanatory pages for specific functions.
+- doxygen generated docs only makes them hard to navigate. No tutorial, no
+ clearly written explanatory pages for specific functions.
- seems (too) tightly integrated with a specific TLS library, while we want to
support WebSocket with whatever TLS library libcurl was already made to
docs/examples/README.md+4 -4
@@ -27,10 +27,10 @@ want you do reorganize them like:
`curl-config --cc` -o example example.c `curl-config --cflags --libs`
-**Please** do not use the `curl.se` site as a test target for your
-libcurl applications/experiments. Even if some of the examples use that site
-as a URL at some places, it does not mean that the URLs work or that we expect
-you to actually torture our website with your tests! Thanks.
+**Please** do not use the `curl.se` site as a test target for your libcurl
+applications/experiments. Even if some of the examples use that site as a URL
+at some places, it does not mean that the URLs work or that we expect you to
+actually torture our website with your tests. Thanks.
## Examples
docs/libcurl/ABI.md+2 -2
@@ -39,8 +39,8 @@ ABI - Application Binary Interface
During the first seven years of libcurl releases, there have only been four
ABI breakages.
- We are determined to bump the SONAME as rarely as possible. Ideally, we
- never do it again.
+ We are determined to bump the SONAME as rarely as possible. Ideally, we never
+ do it again.
## Downgrades
tests/FILEFORMAT.md+22 -22
@@ -6,13 +6,13 @@ SPDX-License-Identifier: curl
# curl test suite file format
-The curl test suite's file format is very simple and extensible, closely
-resembling XML. All data for a single test case resides in a single ASCII
-file. Labels mark the beginning and the end of all sections, and each label
-must be written in its own line. Comments are either XML-style (enclosed with
-`<!--` and `-->`) or shell script style (beginning with `#`) and must appear
-on their own lines and not alongside actual test data. Most test data files
-are syntactically valid XML, although a few files are not (lack of support for
+The curl test suite's file format is simple and extendable, closely resembling
+XML. All data for a single test case resides in a single ASCII file. Labels
+mark the beginning and the end of all sections, and each label must be written
+in its own line. Comments are either XML-style (enclosed with `<!--` and
+`-->`) or shell script style (beginning with `#`) and must appear on their own
+lines and not alongside actual test data. Most test data files are
+syntactically valid XML, although a few files are not (lack of support for
character entities and the preservation of CR/LF characters at the end of
lines are the biggest differences).
@@ -185,11 +185,11 @@ that will be checked/used if specified.
### `<keywords>`
A newline-separated list of keywords describing what this test case uses and
-tests. Try to use already used keywords. These keywords will be used for
+tests. Try to use already used keywords. These keywords will be used for
statistical/informational purposes and for choosing or skipping classes of
-tests. "Keywords" must begin with an alphabetic character, "-", "[" or "{"
-and may actually consist of multiple words separated by spaces which are
-treated together as a single identifier.
+tests. Keywords must begin with an alphabetic character, `-`, `[` or `{` and
+may actually consist of multiple words separated by spaces which are treated
+together as a single identifier.
When using curl built with Hyper, the keywords must include HTTP or HTTPS for
'hyper mode' to kick in and make line ending checks work for tests.
@@ -245,7 +245,7 @@ Send back this contents instead of the <data> one. The num is set by:
Dynamically changing num in this way allows the test harness to be used to
test authentication negotiation where several different requests must be sent
to complete a transfer. The response to each request is found in its own data
-section. Validating the entire negotiation sequence can be done by specifying
+section. Validating the entire negotiation sequence can be done by specifying
a datacheck section.
### `<connect>`
@@ -369,7 +369,7 @@ What server(s) this test case requires/uses. Available servers:
- `socks4`
- `socks5`
-Give only one per line. This subsection is mandatory.
+Give only one per line. This subsection is mandatory.
### `<features>`
A list of features that MUST be present in the client/library for this test to
@@ -437,9 +437,9 @@ Features testable here are:
- `wolfssh`
- `wolfssl`
-as well as each protocol that curl supports. A protocol only needs to be
-specified if it is different from the server (useful when the server
-is `none`).
+as well as each protocol that curl supports. A protocol only needs to be
+specified if it is different from the server (useful when the server is
+`none`).
### `<killserver>`
Using the same syntax as in `<server>` but when mentioned here these servers
@@ -505,20 +505,20 @@ Set `option="no-include"` to prevent the test script to slap on the
`--include` argument.
Set `option="binary-trace"` to use `--trace` instead of `--trace-ascii` for
-tracing. Suitable for binary-oriented protocols such as MQTT.
+tracing. Suitable for binary-oriented protocols such as MQTT.
Set `timeout="secs"` to override default server logs advisor read lock
-timeout. This timeout is used by the test harness, once that the command has
+timeout. This timeout is used by the test harness, once that the command has
completed execution, to wait for the test server to write out server side log
files and remove the lock that advised not to read them. The "secs" parameter
is the not negative integer number of seconds for the timeout. This `timeout`
attribute is documented for completeness sake, but is deep test harness stuff
-and only needed for very singular and specific test cases. Avoid using it.
+and only needed for singular and specific test cases. Avoid using it.
Set `delay="secs"` to introduce a time delay once that the command has
completed execution and before the `<postcheck>` section runs. The "secs"
parameter is the not negative integer number of seconds for the delay. This
-'delay' attribute is intended for very specific test cases, and normally not
+'delay' attribute is intended for specific test cases, and normally not
needed.
### `<file name="log/filename" [nonewline="yes"]>`
@@ -542,7 +542,7 @@ example.
### `<strip>`
One regex per line that is removed from the protocol dumps before the
-comparison is made. This is very useful to remove dependencies on dynamically
+comparison is made. This is useful to remove dependencies on dynamically
changing protocol data such as port numbers or user-agent strings.
### `<strippart>`
@@ -582,7 +582,7 @@ If 'nonewline' is set, we will cut off the trailing newline of this given data
before comparing with the one actually received by the client
### `<file name="log/filename" [mode="text"]>`
-The file's contents must be identical to this after the test is complete. Use
+The file's contents must be identical to this after the test is complete. Use
the mode="text" attribute if the output is in text mode on platforms that have
a text/binary difference.
tests/README.md+13 -14
@@ -113,15 +113,15 @@ SPDX-License-Identifier: curl
Tests which use the ssh test server, SCP/SFTP/SOCKS tests, might be badly
influenced by the output of system wide or user specific shell startup
scripts, .bashrc, .profile, /etc/csh.cshrc, .login, /etc/bashrc, etc. which
- output text messages or escape sequences on user login. When these shell
+ output text messages or escape sequences on user login. When these shell
startup messages or escape sequences are output they might corrupt the
expected stream of data which flows to the sftp-server or from the ssh
- client which can result in bad test behavior or even prevent the test
- server from running.
+ client which can result in bad test behavior or even prevent the test server
+ from running.
If the test suite ssh or sftp server fails to start up and logs the message
'Received message too long' then you are certainly suffering the unwanted
- output of a shell startup script. Locate, cleanup or adjust the shell
+ output of a shell startup script. Locate, cleanup or adjust the shell
script.
### Memory test
@@ -137,7 +137,7 @@ SPDX-License-Identifier: curl
runtests.pl's `-t` option will enable torture testing mode, which runs each
test many times and makes each different memory allocation fail on each
- successive run. This tests the out of memory error handling code to ensure
+ successive run. This tests the out of memory error handling code to ensure
that memory leaks do not occur even in those situations. It can help to
compile curl with `CPPFLAGS=-DMEMDEBUG_LOG_SYNC` when using this option, to
ensure that the memory log file is properly written even if curl crashes.
@@ -145,10 +145,9 @@ SPDX-License-Identifier: curl
### Debug
If a test case fails, you can conveniently get the script to invoke the
- debugger (gdb) for you with the server running and the exact same command
- line parameters that failed. Just invoke `runtests.pl <test number> -g` and
- then just type 'run' in the debugger to perform the command through the
- debugger.
+ debugger (gdb) for you with the server running and the same command line
+ parameters that failed. Just invoke `runtests.pl <test number> -g` and then
+ just type 'run' in the debugger to perform the command through the debugger.
### Logs
@@ -166,8 +165,8 @@ SPDX-License-Identifier: curl
### Code coverage
gcc provides a tool that can determine the code coverage figures for the
- test suite. To use it, configure curl with `CFLAGS='-fprofile-arcs
- -ftest-coverage -g -O0'`. Make sure you run the normal and torture tests to
+ test suite. To use it, configure curl with `CFLAGS='-fprofile-arcs
+ -ftest-coverage -g -O0'`. Make sure you run the normal and torture tests to
get more full coverage, i.e. do:
make test
@@ -179,14 +178,14 @@ SPDX-License-Identifier: curl
ggcov -r lib src
The text mode tool gcov may also be used, but it doesn't handle object files
- in more than one directory very well.
+ in more than one directory correctly.
### Remote testing
The runtests.pl script provides some hooks to allow curl to be tested on a
- machine where perl can not be run. The test framework in this case runs on
+ machine where perl can not be run. The test framework in this case runs on
a workstation where perl is available, while curl itself is run on a remote
- system using ssh or some other remote execution method. See the comments at
+ system using ssh or some other remote execution method. See the comments at
the beginning of runtests.pl for details.
## Test case numbering
tests/unit/README.md+2 -2
@@ -36,14 +36,14 @@ We put tests that focus on an area or a specific function into a single C
source file. The source file should be named 'unitNNNN.c' where NNNN is a
previously unused number.
-Add your test to `tests/unit/Makefile.inc` (if it is a unit test). Add your
+Add your test to `tests/unit/Makefile.inc` (if it is a unit test). Add your
test data file name to `tests/data/Makefile.inc`
You also need a separate file called `tests/data/testNNNN` (using the same
number) that describes your test case. See the test1300 file for inspiration
and the `tests/FILEFORMAT.md` documentation.
-For the actual C file, here's a very simple example:
+For the actual C file, here's a simple example:
~~~c
#include "curlcheck.h"
winbuild/README.md+1 -1
@@ -59,7 +59,7 @@ Open a Visual Studio Command prompt:
Using the **'VS [version] [platform] [type] Command Prompt'** menu entry:
where [version] is the Visual Studio version, [platform] is e.g. x64 and
- [type] Native of Cross platform build. This type of command prompt may not
+ [type] Native of Cross platform build. This type of command prompt may not
exist in all Visual Studio versions.
See also: [Set the Path and Environment Variables for Command-Line Builds](https://docs.microsoft.com/en-us/cpp/build/building-on-the-command-line)